1.
Sistema de unidades
–
A system of measurement is a collection of units of measurement and rules relating them to each other. Systems of measurement have historically been important, regulated and defined for the purposes of science and commerce, systems of measurement in modern use include the metric system, the imperial system, and United States customary units. The French Revolution gave rise to the system, and this has spread around the world. In most systems, length, mass, and time are base quantities, later science developments showed that either electric charge or electric current could be added to extend the set of base quantities by which many other metrological units could be easily defined. Other quantities, such as power and speed, are derived from the set, for example. Such arrangements were satisfactory in their own contexts, the preference for a more universal and consistent system only gradually spread with the growth of science. Changing a measurement system has substantial financial and cultural costs which must be offset against the advantages to be obtained using a more rational system. However pressure built up, including scientists and engineers for conversion to a more rational. The unifying characteristic is that there was some definition based on some standard, eventually cubits and strides gave way to customary units to met the needs of merchants and scientists. In the metric system and other recent systems, a basic unit is used for each base quantity. Often secondary units are derived from the units by multiplying by powers of ten. Thus the basic unit of length is the metre, a distance of 1.234 m is 1,234 millimetres. Metrication is complete or nearly complete in almost all countries, US customary units are heavily used in the United States and to some degree in Liberia. Traditional Burmese units of measurement are used in Burma, U. S. units are used in limited contexts in Canada due to the large volume of trade, there is also considerable use of Imperial weights and measures, despite de jure Canadian conversion to metric. In the United States, metric units are used almost universally in science, widely in the military, and partially in industry, but customary units predominate in household use. At retail stores, the liter is a used unit for volume, especially on bottles of beverages. Some other standard non-SI units are still in use, such as nautical miles and knots in aviation. Metric systems of units have evolved since the adoption of the first well-defined system in France in 1795, during this evolution the use of these systems has spread throughout the world, first to non-English-speaking countries, and then to English speaking countries
2.
Gramo
–
The gram is a metric system unit of mass. Originally defined as the weight of a volume of pure water equal to the cube of the hundredth part of a metre. The only unit symbol for gram that is recognised by the International System of Units is g following the numeric value with a space, the SI does not support the use of abbreviations such as gr, gm or Gm. The word gramme was adopted by the French National Convention in its 1795 decree revising the system as replacing the gravet introduced in 1793. Its definition remained that of the weight of a centimetre of water. French gramme was taken from the Late Latin term gramma and this word, ultimately from Greek γράμμα letter had adopted a specialised meaning in Late Antiquity of one twenty-fourth part of an ounce, corresponding to about 1.14 grams. This use of the term is found in the carmen de ponderibus et mensuris composed around 400 AD, the gram was the fundamental unit of mass in the 19th-century centimetre–gram–second system of units. The gram is today the most widely used unit of measurement for non-liquid ingredients in cooking and grocery shopping worldwide. 1 gram =15.4323583529 grains 1 grain =0.06479891 grams 1 avoirdupois ounce =28.349523125 grams 1 troy ounce =31.1034768 grams 100 grams =3.527396195 ounces 1 gram =5 carats 1 gram =8. 1 gram is roughly equal to 1 small paper clip or pen cap, the Japanese 1 yen coin has a mass of one gram. Conversion of units Duella Gold gram Orders of magnitude Gram at Encyclopædia Britannica
3.
Sistema Internacional de Unidades
–
The International System of Units is the modern form of the metric system, and is the most widely used system of measurement. It comprises a coherent system of units of measurement built on seven base units, the system also establishes a set of twenty prefixes to the unit names and unit symbols that may be used when specifying multiples and fractions of the units. The system was published in 1960 as the result of an initiative began in 1948. It is based on the system of units rather than any variant of the centimetre-gram-second system. The motivation for the development of the SI was the diversity of units that had sprung up within the CGS systems, the International System of Units has been adopted by most developed countries, however, the adoption has not been universal in all English-speaking countries. The metric system was first implemented during the French Revolution with just the metre and kilogram as standards of length, in the 1830s Carl Friedrich Gauss laid the foundations for a coherent system based on length, mass, and time. In the 1860s a group working under the auspices of the British Association for the Advancement of Science formulated the requirement for a coherent system of units with base units and derived units. Meanwhile, in 1875, the Treaty of the Metre passed responsibility for verification of the kilogram, in 1921, the Treaty was extended to include all physical quantities including electrical units originally defined in 1893. The units associated with these quantities were the metre, kilogram, second, ampere, kelvin, in 1971, a seventh base quantity, amount of substance represented by the mole, was added to the definition of SI. On 11 July 1792, the proposed the names metre, are, litre and grave for the units of length, area, capacity. The committee also proposed that multiples and submultiples of these units were to be denoted by decimal-based prefixes such as centi for a hundredth, on 10 December 1799, the law by which the metric system was to be definitively adopted in France was passed. Prior to this, the strength of the magnetic field had only been described in relative terms. The technique used by Gauss was to equate the torque induced on a magnet of known mass by the earth’s magnetic field with the torque induced on an equivalent system under gravity. The resultant calculations enabled him to assign dimensions based on mass, length, a French-inspired initiative for international cooperation in metrology led to the signing in 1875 of the Metre Convention. Initially the convention only covered standards for the metre and the kilogram, one of each was selected at random to become the International prototype metre and International prototype kilogram that replaced the mètre des Archives and kilogramme des Archives respectively. Each member state was entitled to one of each of the prototypes to serve as the national prototype for that country. Initially its prime purpose was a periodic recalibration of national prototype metres. The official language of the Metre Convention is French and the version of all official documents published by or on behalf of the CGPM is the French-language version
4.
Electromagnetismo
–
Electromagnetism is a branch of physics involving the study of the electromagnetic force, a type of physical interaction that occurs between electrically charged particles. The electromagnetic force usually exhibits electromagnetic fields such as fields, magnetic fields. The other three fundamental interactions are the interaction, the weak interaction, and gravitation. The word electromagnetism is a form of two Greek terms, ἤλεκτρον, ēlektron, amber, and μαγνῆτις λίθος magnētis lithos, which means magnesian stone. The electromagnetic force plays a role in determining the internal properties of most objects encountered in daily life. Ordinary matter takes its form as a result of forces between individual atoms and molecules in matter, and is a manifestation of the electromagnetic force. Electrons are bound by the force to atomic nuclei, and their orbital shapes. The electromagnetic force governs the processes involved in chemistry, which arise from interactions between the electrons of neighboring atoms, there are numerous mathematical descriptions of the electromagnetic field. In classical electrodynamics, electric fields are described as electric potential, although electromagnetism is considered one of the four fundamental forces, at high energy the weak force and electromagnetic force are unified as a single electroweak force. In the history of the universe, during the epoch the unified force broke into the two separate forces as the universe cooled. Originally, electricity and magnetism were considered to be two separate forces, Magnetic poles attract or repel one another in a manner similar to positive and negative charges and always exist as pairs, every north pole is yoked to a south pole. An electric current inside a wire creates a corresponding magnetic field outside the wire. Its direction depends on the direction of the current in the wire. A current is induced in a loop of wire when it is moved toward or away from a field, or a magnet is moved towards or away from it. While preparing for a lecture on 21 April 1820, Hans Christian Ørsted made a surprising observation. As he was setting up his materials, he noticed a compass needle deflected away from north when the electric current from the battery he was using was switched on. At the time of discovery, Ørsted did not suggest any explanation of the phenomenon. However, three later he began more intensive investigations
5.
Corriente eléctrica
–
An electric current is a flow of electric charge. In electric circuits this charge is carried by moving electrons in a wire. It can also be carried by ions in an electrolyte, or by both ions and electrons such as in an ionised gas. The SI unit for measuring a current is the ampere. Electric current is measured using a device called an ammeter, electric currents cause Joule heating, which creates light in incandescent light bulbs. They also create magnetic fields, which are used in motors, inductors and generators, the particles that carry the charge in an electric current are called charge carriers. In metals, one or more electrons from each atom are loosely bound to the atom and these conduction electrons are the charge carriers in metal conductors. The conventional symbol for current is I, which originates from the French phrase intensité de courant, current intensity is often referred to simply as current. The I symbol was used by André-Marie Ampère, after whom the unit of current is named, in formulating the eponymous Ampères force law. The notation travelled from France to Great Britain, where it became standard, in a conductive material, the moving charged particles which constitute the electric current are called charge carriers. In other materials, notably the semiconductors, the carriers can be positive or negative. Positive and negative charge carriers may even be present at the same time, a flow of positive charges gives the same electric current, and has the same effect in a circuit, as an equal flow of negative charges in the opposite direction. Since current can be the flow of positive or negative charges. The direction of current is arbitrarily defined as the same direction as positive charges flow. This is called the direction of current I. If the current flows in the direction, the variable I has a negative value. When analyzing electrical circuits, the direction of current through a specific circuit element is usually unknown. Consequently, the directions of currents are often assigned arbitrarily
6.
Campo magnético
–
A magnetic field is the magnetic effect of electric currents and magnetic materials. The magnetic field at any point is specified by both a direction and a magnitude, as such it is represented by a vector field. The term is used for two distinct but closely related fields denoted by the symbols B and H, where H is measured in units of amperes per meter in the SI, B is measured in teslas and newtons per meter per ampere in the SI. B is most commonly defined in terms of the Lorentz force it exerts on moving electric charges, Magnetic fields can be produced by moving electric charges and the intrinsic magnetic moments of elementary particles associated with a fundamental quantum property, their spin. In quantum physics, the field is quantized and electromagnetic interactions result from the exchange of photons. Magnetic fields are used throughout modern technology, particularly in electrical engineering. The Earth produces its own field, which is important in navigation. Rotating magnetic fields are used in electric motors and generators. Magnetic forces give information about the carriers in a material through the Hall effect. The interaction of magnetic fields in electric devices such as transformers is studied in the discipline of magnetic circuits, noting that the resulting field lines crossed at two points he named those points poles in analogy to Earths poles. He also clearly articulated the principle that magnets always have both a north and south pole, no matter how finely one slices them, almost three centuries later, William Gilbert of Colchester replicated Petrus Peregrinus work and was the first to state explicitly that Earth is a magnet. Published in 1600, Gilberts work, De Magnete, helped to establish magnetism as a science, in 1750, John Michell stated that magnetic poles attract and repel in accordance with an inverse square law. Charles-Augustin de Coulomb experimentally verified this in 1785 and stated explicitly that the north and south poles cannot be separated, building on this force between poles, Siméon Denis Poisson created the first successful model of the magnetic field, which he presented in 1824. In this model, a magnetic H-field is produced by magnetic poles, three discoveries challenged this foundation of magnetism, though. First, in 1819, Hans Christian Ørsted discovered that an electric current generates a magnetic field encircling it, then in 1820, André-Marie Ampère showed that parallel wires having currents in the same direction attract one another. Finally, Jean-Baptiste Biot and Félix Savart discovered the Biot–Savart law in 1820, extending these experiments, Ampère published his own successful model of magnetism in 1825. This has the benefit of explaining why magnetic charge can not be isolated. Also in this work, Ampère introduced the term electrodynamics to describe the relationship between electricity and magnetism, in 1831, Michael Faraday discovered electromagnetic induction when he found that a changing magnetic field generates an encircling electric field
7.
Carga eléctrica
–
Electric charge is the physical property of matter that causes it to experience a force when placed in an electromagnetic field. There are two types of charges, positive and negative. Like charges repel and unlike attract, an absence of net charge is referred to as neutral. An object is charged if it has an excess of electrons. The SI derived unit of charge is the coulomb. In electrical engineering, it is common to use the ampere-hour. The symbol Q often denotes charge, early knowledge of how charged substances interact is now called classical electrodynamics, and is still accurate for problems that dont require consideration of quantum effects. The electric charge is a conserved property of some subatomic particles. Electrically charged matter is influenced by, and produces, electromagnetic fields, the interaction between a moving charge and an electromagnetic field is the source of the electromagnetic force, which is one of the four fundamental forces. 602×10−19 coulombs. The proton has a charge of +e, and the electron has a charge of −e, the study of charged particles, and how their interactions are mediated by photons, is called quantum electrodynamics. Charge is the property of forms of matter that exhibit electrostatic attraction or repulsion in the presence of other matter. Electric charge is a property of many subatomic particles. The charges of free-standing particles are integer multiples of the charge e. Michael Faraday, in his electrolysis experiments, was the first to note the discrete nature of electric charge, robert Millikans oil drop experiment demonstrated this fact directly, and measured the elementary charge. By convention, the charge of an electron is −1, while that of a proton is +1, charged particles whose charges have the same sign repel one another, and particles whose charges have different signs attract. The charge of an antiparticle equals that of the corresponding particle, quarks have fractional charges of either −1/3 or +2/3, but free-standing quarks have never been observed. The electric charge of an object is the sum of the electric charges of the particles that make it up. An ion is an atom that has lost one or more electrons, giving it a net charge, or that has gained one or more electrons
8.
Ley de Coulomb
–
Coulombs law, or Coulombs inverse-square law, is a law of physics that describes force interacting between static electrically charged particles. The force of interaction between the charges is attractive if the charges have opposite signs and repulsive if like-signed, the law was first published in 1784 by French physicist Charles Augustin de Coulomb and was essential to the development of the theory of electromagnetism. It is analogous to Isaac Newtons inverse-square law of universal gravitation, Coulombs law can be used to derive Gausss law, and vice versa. The law has been tested extensively, and all observations have upheld the laws principle, ancient cultures around the Mediterranean knew that certain objects, such as rods of amber, could be rubbed with cats fur to attract light objects like feathers. Thales was incorrect in believing the attraction was due to a magnetic effect and he coined the New Latin word electricus to refer to the property of attracting small objects after being rubbed. This association gave rise to the English words electric and electricity, however, he did not generalize or elaborate on this. In 1767, he conjectured that the force between charges varied as the square of the distance. In 1769, Scottish physicist John Robison announced that, according to his measurements, in the early 1770s, the dependence of the force between charged bodies upon both distance and charge had already been discovered, but not published, by Henry Cavendish of England. Finally, in 1785, the French physicist Charles-Augustin de Coulomb published his first three reports of electricity and magnetism where he stated his law and this publication was essential to the development of the theory of electromagnetism. The torsion balance consists of a bar suspended from its middle by a thin fiber, the fiber acts as a very weak torsion spring. In Coulombs experiment, the balance was an insulating rod with a metal-coated ball attached to one end. The ball was charged with a charge of static electricity. The two charged balls repelled one another, twisting the fiber through an angle, which could be read from a scale on the instrument. By knowing how much force it took to twist the fiber through a given angle, the force is along the straight line joining them. If the two charges have the sign, the electrostatic force between them is repulsive, if they have different signs, the force between them is attractive. Coulombs law can also be stated as a mathematical expression. The vector form of the equation calculates the force F1 applied on q1 by q2, if r12 is used instead, then the effect on q2 can be found. It can be calculated using Newtons third law, F2 = −F1
9.
Longitud
–
In geometric measurements, length is the most extended dimension of an object. In the International System of Quantities, length is any quantity with dimension distance, in other contexts length is the measured dimension of an object. For example, it is possible to cut a length of a wire which is shorter than wire thickness. Length may be distinguished from height, which is vertical extent, and width or breadth, length is a measure of one dimension, whereas area is a measure of two dimensions and volume is a measure of three dimensions. In most systems of measurement, the unit of length is a base unit, measurement has been important ever since humans settled from nomadic lifestyles and started using building materials, occupying land and trading with neighbours. As society has become more technologically oriented, much higher accuracies of measurement are required in a diverse set of fields. One of the oldest units of measurement used in the ancient world was the cubit which was the length of the arm from the tip of the finger to the elbow. This could then be subdivided into shorter units like the foot, hand or finger, the cubit could vary considerably due to the different sizes of people. After Albert Einsteins special relativity, length can no longer be thought of being constant in all reference frames. Thus a ruler that is one meter long in one frame of reference will not be one meter long in a frame that is travelling at a velocity relative to the first frame. This means length of an object is variable depending on the observer, in the physical sciences and engineering, when one speaks of units of length, the word length is synonymous with distance. There are several units that are used to measure length, in the International System of Units, the basic unit of length is the metre and is now defined in terms of the speed of light. The centimetre and the kilometre, derived from the metre, are commonly used units. In U. S. customary units, English or Imperial system of units, commonly used units of length are the inch, the foot, the yard, and the mile. Units used to denote distances in the vastness of space, as in astronomy, are longer than those typically used on Earth and include the astronomical unit, the light-year. Dimension Distance Orders of magnitude Reciprocal length Smoot Unit of length