1.
Uniform polypeton
–
In six-dimensional geometry, a uniform polypeton is a six-dimensional uniform polytope. A uniform polypeton is vertex-transitive, and all facets are uniform 5-polytopes, the complete set of convex uniform polypeta has not been determined, but most can be made as Wythoff constructions from a small set of symmetry groups. These construction operations are represented by the permutations of rings of the Coxeter-Dynkin diagrams, each combination of at least one ring on every connected group of nodes in the diagram produces a uniform 6-polytope. The simplest uniform polypeta are regular polytopes, the 6-simplex, the 6-cube, Regular polytopes,1852, Ludwig Schläfli proved in his manuscript Theorie der vielfachen Kontinuität that there are exactly 3 regular polytopes in 5 or more dimensions. Convex uniform polytopes,1940, The search was expanded systematically by H. S. M, Coxeter in his publication Regular and Semi-Regular Polytopes. Nonregular uniform star polytopes, Ongoing, Thousands of nonconvex uniform polypeta are known, participating researchers include Jonathan Bowers, Richard Klitzing and Norman Johnson. Uniform 6-polytopes with reflective symmetry can be generated by these four Coxeter groups, There are four fundamental reflective symmety groups which generate 153 unique uniform 6-polytopes. Uniform prism There are 6 categorical uniform prisms based on the uniform 5-polytopes, Uniform duoprism There are 11 categorical uniform duoprismatic families of polytopes based on Cartesian products of lower-dimensional uniform polytopes. Each combination of at least one ring on every connected group produces a uniform prismatic 6-polytope, in addition, there are 105 uniform 6-polytope constructions based on prisms of the uniform 5-polytopes. In addition, there are many uniform 6-polytope based on. There are 32+4−1=35 forms, derived by marking one or more nodes of the Coxeter-Dynkin diagram and they are named by Norman Johnson from the Wythoff construction operations upon regular 6-simplex. Bowers-style acronym names are given in parentheses for cross-referencing, the A6 family has symmetry of order 5040. The coordinates of uniform 6-polytopes with 6-simplex symmetry can be generated as permutations of simple integers in 7-space, see also list of A6 polytopes for graphs of these polytopes. There are 63 forms based on all permutations of the Coxeter-Dynkin diagrams with one or more rings, the B6 family has symmetry of order 46080. They are named by Norman Johnson from the Wythoff construction operations upon the regular 6-cube, Bowers names and acronym names are given for cross-referencing. See also list of B6 polytopes for graphs of these polytopes, the D6 family has symmetry of order 23040. This family has 3×16−1=47 Wythoffian uniform polytopes, generated by marking one or more nodes of the D6 Coxeter-Dynkin diagram, of these,31 are repeated from the B6 family and 16 are unique to this family. The 16 unique forms are enumerated below, bowers-style acronym names are given for cross-referencing
2.
Coxeter diagram
–
In geometry, a Coxeter–Dynkin diagram is a graph with numerically labeled edges representing the spatial relations between a collection of mirrors. It describes a kaleidoscopic construction, each node represents a mirror. An unlabeled branch implicitly represents order-3, each diagram represents a Coxeter group, and Coxeter groups are classified by their associated diagrams. Dynkin diagrams correspond to and are used to root systems. Branches of a Coxeter–Dynkin diagram are labeled with a number p. When p =2 the angle is 90° and the mirrors have no interaction, if a branch is unlabeled, it is assumed to have p =3, representing an angle of 60°. Two parallel mirrors have a branch marked with ∞, in principle, n mirrors can be represented by a complete graph in which all n /2 branches are drawn. In practice, nearly all interesting configurations of mirrors include a number of right angles, diagrams can be labeled by their graph structure. The first forms studied by Ludwig Schläfli are the orthoschemes which have linear graphs that generate regular polytopes, plagioschemes are simplices represented by branching graphs, and cycloschemes are simplices represented by cyclic graphs. Every Coxeter diagram has a corresponding Schläfli matrix with matrix elements ai, j = aj, as a matrix of cosines, it is also called a Gramian matrix after Jørgen Pedersen Gram. All Coxeter group Schläfli matrices are symmetric because their root vectors are normalized. It is related closely to the Cartan matrix, used in the similar but directed graph Dynkin diagrams in the cases of p =2,3,4, and 6. The determinant of the Schläfli matrix, called the Schläflian, and its sign determines whether the group is finite, affine and this rule is called Schläflis Criterion. The eigenvalues of the Schläfli matrix determines whether a Coxeter group is of type, affine type. The indefinite type is further subdivided, e. g. into hyperbolic. However, there are multiple non-equivalent definitions for hyperbolic Coxeter groups and we use the following definition, A Coxeter group with connected diagram is hyperbolic if it is neither of finite nor affine type, but every proper connected subdiagram is of finite or affine type. A hyperbolic Coxeter group is compact if all subgroups are finite, Finite and affine groups are also called elliptical and parabolic respectively. Hyperbolic groups are also called Lannér, after F. Lannér who enumerated the compact groups in 1950
3.
Euler characteristic
–
It is commonly denoted by χ. The Euler characteristic was originally defined for polyhedra and used to prove theorems about them. Leonhard Euler, for whom the concept is named, was responsible for much of early work. In modern mathematics, the Euler characteristic arises from homology and, more abstractly, any convex polyhedrons surface has Euler characteristic V − E + F =2. This equation is known as Eulers polyhedron formula and it corresponds to the Euler characteristic of the sphere, and applies identically to spherical polyhedra. An illustration of the formula on some polyhedra is given below and this version holds both for convex polyhedra and the non-convex Kepler-Poinsot polyhedra. Projective polyhedra all have Euler characteristic 1, like the real plane, while the surfaces of toroidal polyhedra all have Euler characteristic 0. The Euler characteristic can be defined for connected plane graphs by the same V − E + F formula as for polyhedral surfaces, the Euler characteristic of any plane connected graph G is 2. This is easily proved by induction on the number of determined by G. For trees, E = V −1 and F =1, if G has C components, the same argument by induction on F shows that V − E + F − C =1. One of the few graph theory papers of Cauchy also proves this result, via stereographic projection the plane maps to the two-dimensional sphere, such that a connected graph maps to a polygonal decomposition of the sphere, which has Euler characteristic 2. This viewpoint is implicit in Cauchys proof of Eulers formula given below, there are many proofs of Eulers formula. One was given by Cauchy in 1811, as follows and it applies to any convex polyhedron, and more generally to any polyhedron whose boundary is topologically equivalent to a sphere and whose faces are topologically equivalent to disks. Remove one face of the polyhedral surface, after this deformation, the regular faces are generally not regular anymore. The number of vertices and edges has remained the same, therefore, proving Eulers formula for the polyhedron reduces to proving V − E + F =1 for this deformed, planar object. If there is a face more than three sides, draw a diagonal—that is, a curve through the face connecting two vertices that arent connected yet. This adds one edge and one face and does not change the number of vertices, continue adding edges in this manner until all of the faces are triangular. This decreases the number of edges and faces by one each and does not change the number of vertices, remove a triangle with two edges shared by the exterior of the network, as illustrated by the third graph
4.
Coxeter group
–
In mathematics, a Coxeter group, named after H. S. M. Coxeter, is an abstract group that admits a formal description in terms of reflections. Indeed, the finite Coxeter groups are precisely the finite Euclidean reflection groups, however, not all Coxeter groups are finite, and not all can be described in terms of symmetries and Euclidean reflections. Coxeter groups were introduced as abstractions of reflection groups, and finite Coxeter groups were classified in 1935, Coxeter groups find applications in many areas of mathematics. Examples of finite Coxeter groups include the groups of regular polytopes. The condition m i j = ∞ means no relation of the form m should be imposed, the pair where W is a Coxeter group with generators S = is called a Coxeter system. Note that in general S is not uniquely determined by W, for example, the Coxeter groups of type B3 and A1 × A3 are isomorphic but the Coxeter systems are not equivalent. A number of conclusions can be drawn immediately from the above definition, the relation m i i =1 means that 1 =2 =1 for all i, as such the generators are involutions. If m i j =2, then the r i and r j commute. This follows by observing that x x = y y =1, in order to avoid redundancy among the relations, it is necessary to assume that m i j = m j i. This follows by observing that y y =1, together with m =1 implies that m = m y y = y m y = y y =1. Alternatively, k and k are elements, as y k y −1 = k y y −1 = k. The Coxeter matrix is the n × n, symmetric matrix with entries m i j, indeed, every symmetric matrix with positive integer and ∞ entries and with 1s on the diagonal such that all nondiagonal entries are greater than 1 serves to define a Coxeter group. The Coxeter matrix can be encoded by a Coxeter diagram. The vertices of the graph are labelled by generator subscripts, vertices i and j are adjacent if and only if m i j ≥3. An edge is labelled with the value of m i j whenever the value is 4 or greater, in particular, two generators commute if and only if they are not connected by an edge. Furthermore, if a Coxeter graph has two or more connected components, the group is the direct product of the groups associated to the individual components. Thus the disjoint union of Coxeter graphs yields a product of Coxeter groups. The Coxeter matrix, M i j, is related to the n × n Schläfli matrix C with entries C i j = −2 cos , but the elements are modified, being proportional to the dot product of the pairwise generators
5.
Vertex figure
–
In geometry, a vertex figure, broadly speaking, is the figure exposed when a corner of a polyhedron or polytope is sliced off. Take some vertex of a polyhedron, mark a point somewhere along each connected edge. Draw lines across the faces, joining adjacent points. When done, these form a complete circuit, i. e. a polygon. This polygon is the vertex figure, more precise formal definitions can vary quite widely, according to circumstance. For example Coxeter varies his definition as convenient for the current area of discussion, most of the following definitions of a vertex figure apply equally well to infinite tilings, or space-filling tessellation with polytope cells. Make a slice through the corner of the polyhedron, cutting all the edges connected to the vertex. The cut surface is the vertex figure and this is perhaps the most common approach, and the most easily understood. Different authors make the slice in different places, Wenninger cuts each edge a unit distance from the vertex, as does Coxeter. For uniform polyhedra the Dorman Luke construction cuts each connected edge at its midpoint, other authors make the cut through the vertex at the other end of each edge. For irregular polyhedra, these approaches may produce a figure that does not lie in a plane. A more general approach, valid for convex polyhedra, is to make the cut along any plane which separates the given vertex from all the other vertices. Cromwell makes a cut or scoop, centered on the vertex. The cut surface or vertex figure is thus a spherical polygon marked on this sphere, many combinatorial and computational approaches treat a vertex figure as the ordered set of points of all the neighboring vertices to the given vertex. In the theory of polytopes, the vertex figure at a given vertex V comprises all the elements which are incident on the vertex, edges, faces. More formally it is the -section Fn/V, where Fn is the greatest face and this set of elements is elsewhere known as a vertex star. A vertex figure for an n-polytope is an -polytope, for example, a vertex figure for a polyhedron is a polygon figure, and the vertex figure for a 4-polytope is a polyhedron. Each edge of the vertex figure exists on or inside of a face of the original polytope connecting two vertices from an original face
6.
5-simplex
–
In five-dimensional geometry, a 5-simplex is a self-dual regular 5-polytope. It has six vertices,15 edges,20 triangle faces,15 tetrahedral cells and it has a dihedral angle of cos−1, or approximately 78. 46°. It can also be called a hexateron, or hexa-5-tope, as a 6-facetted polytope in 5-dimensions, the name hexateron is derived from hexa- for having six facets and teron for having four-dimensional facets. By Jonathan Bowers, a hexateron is given the acronym hix, the hexateron can be constructed from a 5-cell by adding a 6th vertex such that it is equidistant from all the other vertices of the 5-cell. These construction can be seen as facets of the 6-orthoplex or rectified 6-cube respectively and it is first in a dimensional series of uniform polytopes and honeycombs, expressed by Coxeter as 13k series. A degenerate 4-dimensional case exists as 3-sphere tiling, a tetrahedral dihedron and it is first in a dimensional series of uniform polytopes and honeycombs, expressed by Coxeter as 3k1 series. A degenerate 4-dimensional case exists as 3-sphere tiling, a tetrahedral hosohedron, the 5-simplex, as 220 polytope is first in dimensional series 22k. The regular 5-simplex is one of 19 uniform polytera based on the Coxeter group, the 5-simplex can also be considered a 5-cell pyramid, constructed as a 5-cell base in a 4-space hyperplane, and an apex point above the hyperplane. The five sides of the pyramid are made of 5-cell cells, T. Gosset, On the Regular and Semi-Regular Figures in Space of n Dimensions, Messenger of Mathematics, Macmillan,1900 H. S. M. Coxeter, Coxeter, Regular Polytopes, Dover edition, ISBN 0-486-61480-8, p.296, Table I, Regular Polytopes, three regular polytopes in n-dimensions H. S. M. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973, p.296, Table I, Regular Polytopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D. 5D uniform polytopes x3o3o3o3o - hix, archived from the original on 4 February 2007. Polytopes of Various Dimensions, Jonathan Bowers Multi-dimensional Glossary
7.
Uniform polytope
–
A uniform polytope of dimension three or higher is a vertex-transitive polytope bounded by uniform facets. The uniform polytopes in two dimensions are the regular polygons and this is a generalization of the older category of semiregular polytopes, but also includes the regular polytopes. Further, star regular faces and vertex figures are allowed, which expand the possible solutions. A strict definition requires uniform polytopes to be finite, while a more expansive definition allows uniform honeycombs of Euclidean, nearly every uniform polytope can be generated by a Wythoff construction, and represented by a Coxeter diagram. Notable exceptions include the antiprism in four dimensions. Equivalently, the Wythoffian polytopes can be generated by applying basic operations to the regular polytopes in that dimension and this approach was first used by Johannes Kepler, and is the basis of the Conway polyhedron notation. Regular n-polytopes have n orders of rectification, the zeroth rectification is the original form. The th rectification is the dual, an extended Schläfli symbol can be used for representing rectified forms, with a single subscript, k-th rectification = tk = kr. Truncation operations that can be applied to regular n-polytopes in any combination, the resulting Coxeter diagram has two ringed nodes, and the operation is named for the distance between them. Truncation cuts vertices, cantellation cuts edges, runcination cuts faces, each higher operation also cuts lower ones too, so a cantellation also truncates vertices. T0,1 or t, Truncation - applied to polygons, a truncation removes vertices, and inserts a new facet in place of each former vertex. Faces are truncated, doubling their edges and it can be seen as rectifying its rectification. A cantellation truncates both vertices and edges and replaces them with new facets, cells are replaced by topologically expanded copies of themselves. There are higher cantellations also, bicantellation t1,3 or r2r, tricantellation t2,4 or r3r, quadricantellation t3,5 or r4r, etc. t0,1,2 or tr, Cantitruncation - applied to polyhedra and higher. It can be seen as a truncation of its rectification, a cantitruncation truncates both vertices and edges and replaces them with new facets. Cells are replaced by topologically expanded copies of themselves, runcination truncates vertices, edges, and faces, replacing them each with new facets. 4-faces are replaced by topologically expanded copies of themselves, There are higher runcinations also, biruncination t1,4, triruncination t2,5, etc. t0,4 or 2r2r, Sterication - applied to Uniform 5-polytopes and higher. It can be seen as birectifying its birectification, Sterication truncates vertices, edges, faces, and cells, replacing each with new facets
8.
Convex polytope
–
A convex polytope is a special case of a polytope, having the additional property that it is also a convex set of points in the n-dimensional space Rn. Some authors use the terms polytope and convex polyhedron interchangeably. In addition, some require a polytope to be a bounded set. The terms bounded/unbounded convex polytope will be used whenever the boundedness is critical to the discussed issue. Yet other texts treat a convex n-polytope as a surface or -manifold, Convex polytopes play an important role both in various branches of mathematics and in applied areas, most notably in linear programming. A comprehensive and influential book in the subject, called Convex Polytopes, was published in 1967 by Branko Grünbaum, in 2003 the 2nd edition of the book was published, with significant additional material contributed by new writers. In Grünbaums book, and in other texts in discrete geometry. Grünbaum points out that this is solely to avoid the repetition of the word convex. A polytope is called if it is an n-dimensional object in Rn. Many examples of bounded convex polytopes can be found in the article polyhedron, a convex polytope may be defined in a number of ways, depending on what is more suitable for the problem at hand. Grünbaums definition is in terms of a set of points in space. Other important definitions are, as the intersection of half-spaces and as the hull of a set of points. This is equivalent to defining a bounded convex polytope as the hull of a finite set of points. Such a definition is called a vertex representation, for a compact convex polytope, the minimal V-description is unique and it is given by the set of the vertices of the polytope. A convex polytope may be defined as an intersection of a number of half-spaces. Such definition is called a half-space representation, there exist infinitely many H-descriptions of a convex polytope. However, for a convex polytope, the minimal H-description is in fact unique and is given by the set of the facet-defining halfspaces. A closed half-space can be written as an inequality, a 1 x 1 + a 2 x 2 + ⋯ + a n x n ≤ b where n is the dimension of the space containing the polytope under consideration
9.
Isogonal figure
–
In geometry, a polytope is isogonal or vertex-transitive if, loosely speaking, all its vertices are equivalent. That implies that each vertex is surrounded by the kinds of face in the same or reverse order. Technically, we say that for any two vertices there exists a symmetry of the polytope mapping the first isometrically onto the second. Other ways of saying this are that the group of automorphisms of the polytope is transitive on its vertices, all vertices of a finite n-dimensional isogonal figure exist on an -sphere. The term isogonal has long used for polyhedra. Vertex-transitive is a synonym borrowed from modern ideas such as symmetry groups, all regular polygons, apeirogons and regular star polygons are isogonal. The dual of a polygon is an isotoxal polygon. Some even-sided polygons and apeirogons which alternate two edge lengths, for example a rectangle, are isogonal, all planar isogonal 2n-gons have dihedral symmetry with reflection lines across the mid-edge points. An isogonal polyhedron and 2D tiling has a kind of vertex. An isogonal polyhedron with all faces is also a uniform polyhedron. Geometrically distorted variations of uniform polyhedra and tilings can also be given the vertex configuration, isogonal polyhedra and 2D tilings may be further classified, Regular if it is also isohedral and isotoxal, this implies that every face is the same kind of regular polygon. Quasi-regular if it is also isotoxal but not isohedral, semi-regular if every face is a regular polygon but it is not isohedral or isotoxal. Uniform if every face is a polygon, i. e. it is regular, quasiregular or semi-regular. Noble if it is also isohedral and these definitions can be extended to higher-dimensional polytopes and tessellations. Most generally, all uniform polytopes are isogonal, for example, the dual of an isogonal polytope is called an isotope which is transitive on its facets. A polytope or tiling may be called if its vertices form k transitivity classes. A more restrictive term, k-uniform is defined as a figure constructed only from regular polygons. They can be represented visually with colors by different uniform colorings, edge-transitive Face-transitive Peter R. Cromwell, Polyhedra, Cambridge University Press 1997, ISBN 0-521-55432-2, p.369 Transitivity Grünbaum, Branko, Shephard, G. C
10.
Self-dual
–
Such involutions sometimes have fixed points, so that the dual of A is A itself. For example, Desargues theorem is self-dual in this sense under the standard duality in projective geometry, many mathematical dualities between objects of two types correspond to pairings, bilinear functions from an object of one type and another object of the second type to some family of scalars. From a category theory viewpoint, duality can also be seen as a functor and this functor assigns to each space its dual space, and the pullback construction assigns to each arrow f, V → W its dual f∗, W∗ → V∗. In the words of Michael Atiyah, Duality in mathematics is not a theorem, the following list of examples shows the common features of many dualities, but also indicates that the precise meaning of duality may vary from case to case. A simple, maybe the most simple, duality arises from considering subsets of a fixed set S, to any subset A ⊆ S, the complement Ac consists of all those elements in S which are not contained in A. It is again a subset of S, taking the complement has the following properties, Applying it twice gives back the original set, i. e. c = A. This is referred to by saying that the operation of taking the complement is an involution, an inclusion of sets A ⊆ B is turned into an inclusion in the opposite direction Bc ⊆ Ac. Given two subsets A and B of S, A is contained in Bc if and only if B is contained in Ac. This duality appears in topology as a duality between open and closed subsets of some fixed topological space X, a subset U of X is closed if, because of this, many theorems about closed sets are dual to theorems about open sets. For example, any union of sets is open, so dually. The interior of a set is the largest open set contained in it, because of the duality, the complement of the interior of any set U is equal to the closure of the complement of U. A duality in geometry is provided by the cone construction. Given a set C of points in the plane R2, unlike for the complement of sets mentioned above, it is not in general true that applying the dual cone construction twice gives back the original set C. Instead, C ∗ ∗ is the smallest cone containing C which may be bigger than C. Therefore this duality is weaker than the one above, in that Applying the operation twice gives back a possibly bigger set, the other two properties carry over without change, It is still true that an inclusion C ⊆ D is turned into an inclusion in the opposite direction. Given two subsets C and D of the plane, C is contained in D ∗ if, a very important example of a duality arises in linear algebra by associating to any vector space V its dual vector space V*. Its elements are the k-linear maps φ, V → k, the three properties of the dual cone carry over to this type of duality by replacing subsets of R2 by vector space and inclusions of such subsets by linear maps. That is, Applying the operation of taking the dual vector space twice gives another vector space V**, there is always a map V → V**
11.
Geometry
–
Geometry is a branch of mathematics concerned with questions of shape, size, relative position of figures, and the properties of space. A mathematician who works in the field of geometry is called a geometer, Geometry arose independently in a number of early cultures as a practical way for dealing with lengths, areas, and volumes. Geometry began to see elements of mathematical science emerging in the West as early as the 6th century BC. By the 3rd century BC, geometry was put into a form by Euclid, whose treatment, Euclids Elements. Geometry arose independently in India, with texts providing rules for geometric constructions appearing as early as the 3rd century BC, islamic scientists preserved Greek ideas and expanded on them during the Middle Ages. By the early 17th century, geometry had been put on a solid footing by mathematicians such as René Descartes. Since then, and into modern times, geometry has expanded into non-Euclidean geometry and manifolds, while geometry has evolved significantly throughout the years, there are some general concepts that are more or less fundamental to geometry. These include the concepts of points, lines, planes, surfaces, angles, contemporary geometry has many subfields, Euclidean geometry is geometry in its classical sense. The mandatory educational curriculum of the majority of nations includes the study of points, lines, planes, angles, triangles, congruence, similarity, solid figures, circles, Euclidean geometry also has applications in computer science, crystallography, and various branches of modern mathematics. Differential geometry uses techniques of calculus and linear algebra to problems in geometry. It has applications in physics, including in general relativity, topology is the field concerned with the properties of geometric objects that are unchanged by continuous mappings. In practice, this often means dealing with large-scale properties of spaces, convex geometry investigates convex shapes in the Euclidean space and its more abstract analogues, often using techniques of real analysis. It has close connections to convex analysis, optimization and functional analysis, algebraic geometry studies geometry through the use of multivariate polynomials and other algebraic techniques. It has applications in areas, including cryptography and string theory. Discrete geometry is concerned mainly with questions of relative position of simple objects, such as points. It shares many methods and principles with combinatorics, Geometry has applications to many fields, including art, architecture, physics, as well as to other branches of mathematics. The earliest recorded beginnings of geometry can be traced to ancient Mesopotamia, the earliest known texts on geometry are the Egyptian Rhind Papyrus and Moscow Papyrus, the Babylonian clay tablets such as Plimpton 322. For example, the Moscow Papyrus gives a formula for calculating the volume of a truncated pyramid, later clay tablets demonstrate that Babylonian astronomers implemented trapezoid procedures for computing Jupiters position and motion within time-velocity space
12.
Simplex
–
In geometry, a simplex is a generalization of the notion of a triangle or tetrahedron to arbitrary dimensions. Specifically, a k-simplex is a polytope which is the convex hull of its k +1 vertices. More formally, suppose the k +1 points u 0, …, u k ∈ R k are affinely independent, then, the simplex determined by them is the set of points C =. For example, a 2-simplex is a triangle, a 3-simplex is a tetrahedron, a single point may be considered a 0-simplex, and a line segment may be considered a 1-simplex. A simplex may be defined as the smallest convex set containing the given vertices, a regular simplex is a simplex that is also a regular polytope. A regular n-simplex may be constructed from a regular -simplex by connecting a new vertex to all original vertices by the edge length. In topology and combinatorics, it is common to “glue together” simplices to form a simplicial complex, the associated combinatorial structure is called an abstract simplicial complex, in which context the word “simplex” simply means any finite set of vertices. A 1-simplex is a line segment, the convex hull of any nonempty subset of the n+1 points that define an n-simplex is called a face of the simplex. In particular, the hull of a subset of size m+1 is an m-simplex. The 0-faces are called the vertices, the 1-faces are called the edges, the -faces are called the facets, in general, the number of m-faces is equal to the binomial coefficient. Consequently, the number of m-faces of an n-simplex may be found in column of row of Pascals triangle, a simplex A is a coface of a simplex B if B is a face of A. Face and facet can have different meanings when describing types of simplices in a simplicial complex, see simplical complex for more detail. The regular simplex family is the first of three regular polytope families, labeled by Coxeter as αn, the two being the cross-polytope family, labeled as βn, and the hypercubes, labeled as γn. A fourth family, the infinite tessellation of hypercubes, he labeled as δn, an -simplex can be constructed as a join of an n-simplex and a point. An -simplex can be constructed as a join of an m-simplex, the two simplices are oriented to be completely normal from each other, with translation in a direction orthogonal to both of them. A 1-simplex is a joint of two points, ∨ =2, a general 2-simplex is the join of 3 points, ∨∨. An isosceles triangle is the join of a 1-simplex and a point, a general 3-simplex is the join of 4 points, ∨∨∨. A 3-simplex with mirror symmetry can be expressed as the join of an edge and 2 points, a 3-simplex with triangular symmetry can be expressed as the join of an equilateral triangle and 1 point,3. ∨ or ∨
13.
Duality (mathematics)
–
Such involutions sometimes have fixed points, so that the dual of A is A itself. For example, Desargues theorem is self-dual in this sense under the standard duality in projective geometry, many mathematical dualities between objects of two types correspond to pairings, bilinear functions from an object of one type and another object of the second type to some family of scalars. From a category theory viewpoint, duality can also be seen as a functor and this functor assigns to each space its dual space, and the pullback construction assigns to each arrow f, V → W its dual f∗, W∗ → V∗. In the words of Michael Atiyah, Duality in mathematics is not a theorem, the following list of examples shows the common features of many dualities, but also indicates that the precise meaning of duality may vary from case to case. A simple, maybe the most simple, duality arises from considering subsets of a fixed set S, to any subset A ⊆ S, the complement Ac consists of all those elements in S which are not contained in A. It is again a subset of S, taking the complement has the following properties, Applying it twice gives back the original set, i. e. c = A. This is referred to by saying that the operation of taking the complement is an involution, an inclusion of sets A ⊆ B is turned into an inclusion in the opposite direction Bc ⊆ Ac. Given two subsets A and B of S, A is contained in Bc if and only if B is contained in Ac. This duality appears in topology as a duality between open and closed subsets of some fixed topological space X, a subset U of X is closed if, because of this, many theorems about closed sets are dual to theorems about open sets. For example, any union of sets is open, so dually. The interior of a set is the largest open set contained in it, because of the duality, the complement of the interior of any set U is equal to the closure of the complement of U. A duality in geometry is provided by the cone construction. Given a set C of points in the plane R2, unlike for the complement of sets mentioned above, it is not in general true that applying the dual cone construction twice gives back the original set C. Instead, C ∗ ∗ is the smallest cone containing C which may be bigger than C. Therefore this duality is weaker than the one above, in that Applying the operation twice gives back a possibly bigger set, the other two properties carry over without change, It is still true that an inclusion C ⊆ D is turned into an inclusion in the opposite direction. Given two subsets C and D of the plane, C is contained in D ∗ if, a very important example of a duality arises in linear algebra by associating to any vector space V its dual vector space V*. Its elements are the k-linear maps φ, V → k, the three properties of the dual cone carry over to this type of duality by replacing subsets of R2 by vector space and inclusions of such subsets by linear maps. That is, Applying the operation of taking the dual vector space twice gives another vector space V**, there is always a map V → V**
14.
Regular polytope
–
In mathematics, a regular polytope is a polytope whose symmetry group acts transitively on its flags, thus giving it the highest degree of symmetry. All its elements or j-faces — cells, faces and so on — are also transitive on the symmetries of the polytope, Regular polytopes are the generalized analog in any number of dimensions of regular polygons and regular polyhedra. The strong symmetry of the regular polytopes gives them an aesthetic quality that interests both non-mathematicians and mathematicians, classically, a regular polytope in n dimensions may be defined as having regular facets and regular vertex figures. These two conditions are sufficient to ensure that all faces are alike and all vertices are alike, note, however, that this definition does not work for abstract polytopes. A regular polytope can be represented by a Schläfli symbol of the form, with regular facets as, Regular polytopes are classified primarily according to their dimensionality. They can be classified according to symmetry. For example, the cube and the regular octahedron share the same symmetry, indeed, symmetry groups are sometimes named after regular polytopes, for example the tetrahedral and icosahedral symmetries. Three special classes of regular polytope exist in every dimensionality, Regular simplex Measure polytope Cross polytope In two dimensions there are many regular polygons. In three and four dimensions there are more regular polyhedra and 4-polytopes besides these three. In five dimensions and above, these are the only ones, see also the list of regular polytopes. The idea of a polytope is sometimes generalised to include related kinds of geometrical object, some of these have regular examples, as discussed in the section on historical discovery below. A concise symbolic representation for regular polytopes was developed by Ludwig Schläfli in the 19th Century, the notation is best explained by adding one dimension at a time. A convex regular polygon having n sides is denoted by, so an equilateral triangle is, a square, and so on indefinitely. A regular star polygon which winds m times around its centre is denoted by the fractional value, a regular polyhedron having faces with p faces joining around a vertex is denoted by. The nine regular polyhedra are and. is the figure of the polyhedron. A regular 4-polytope having cells with q cells joining around an edge is denoted by, the vertex figure of the 4-polytope is a. A five-dimensional regular polytope is an, the dual of a regular polytope is also a regular polytope. The Schläfli symbol for the dual polytope is just the original written backwards, is self-dual, is dual to, to
15.
6-polytope
–
In six-dimensional geometry, a six-dimensional polytope or 6-polytope is a polytope, bounded by 5-polytope facets. A 6-polytope is a closed figure with vertices, edges, faces, cells, 4-faces. A vertex is a point where six or more edges meet, an edge is a line segment where four or more faces meet, and a face is a polygon where three or more cells meet. A 4-face is a polychoron, and a 5-face is a 5-polytope, furthermore, the following requirements must be met, Each 4-face must join exactly two 5-faces. Adjacent facets are not in the same five-dimensional hyperplane, the figure is not a compound of other figures which meet the requirements. The topology of any given 6-polytope is defined by its Betti numbers, the value of the Euler characteristic used to characterise polyhedra does not generalize usefully to higher dimensions, and is zero for all 6-polytopes, whatever their underlying topology. This inadequacy of the Euler characteristic to distinguish between different topologies in higher dimensions led to the discovery of the more sophisticated Betti numbers. Similarly, the notion of orientability of a polyhedron is insufficient to characterise the surface twistings of toroidal polytopes, 6-polytopes may be classified by properties like convexity and symmetry. Self-intersecting 6-polytope are also known as star 6-polytopes, from analogy with the shapes of the non-convex Kepler-Poinsot polyhedra. A regular 6-polytope has all identical regular 5-polytope facets, a semi-regular 6-polytope contains two or more types of regular 4-polytope facets. There is only one figure, called 221. A uniform 6-polytope has a group under which all vertices are equivalent. The faces of a uniform polytope must be regular, a prismatic 6-polytope is constructed by the Cartesian product of two lower-dimensional polytopes. A prismatic 6-polytope is uniform if its factors are uniform, the 6-cube is prismatic, but is considered separately because it has symmetries other than those inherited from its factors. A 5-space tessellation is the division of five-dimensional Euclidean space into a grid of 5-polytope facets. Strictly speaking, tessellations are not 6-polytopes as they do not bound a 6D volume, a uniform 5-space tessellation is one whose vertices are related by a space group and whose facets are uniform 5-polytopes. Regular 6-polytopes can be generated from Coxeter groups represented by the Schläfli symbol with t 5-polytope facets around each cell, There are only three such convex regular 6-polytopes, - 6-simplex - 6-cube - 6-orthoplex There are no nonconvex regular polytopes of 5 or more dimensions. For the 3 convex regular 6-polytopes, their elements are, Here are six simple uniform convex 6-polytopes, the expanded 6-simplex is the vertex figure of the uniform 6-simplex honeycomb
16.
Vertex (geometry)
–
In geometry, a vertex is a point where two or more curves, lines, or edges meet. As a consequence of this definition, the point where two lines meet to form an angle and the corners of polygons and polyhedra are vertices. A vertex is a point of a polygon, polyhedron, or other higher-dimensional polytope. However, in theory, vertices may have fewer than two incident edges, which is usually not allowed for geometric vertices. However, a smooth approximation to a polygon will also have additional vertices. A polygon vertex xi of a simple polygon P is a principal polygon vertex if the diagonal intersects the boundary of P only at x and x, there are two types of principal vertices, ears and mouths. A principal vertex xi of a simple polygon P is called an ear if the diagonal that bridges xi lies entirely in P, according to the two ears theorem, every simple polygon has at least two ears. A principal vertex xi of a simple polygon P is called a mouth if the diagonal lies outside the boundary of P. Any convex polyhedrons surface has Euler characteristic V − E + F =2, where V is the number of vertices, E is the number of edges and this equation is known as Eulers polyhedron formula. Thus the number of vertices is 2 more than the excess of the number of edges over the number of faces, for example, a cube has 12 edges and 6 faces, and hence 8 vertices
17.
Edge (geometry)
–
For edge in graph theory, see Edge In geometry, an edge is a particular type of line segment joining two vertices in a polygon, polyhedron, or higher-dimensional polytope. In a polygon, an edge is a segment on the boundary. In a polyhedron or more generally a polytope, an edge is a segment where two faces meet. A segment joining two vertices while passing through the interior or exterior is not an edge but instead is called a diagonal. In graph theory, an edge is an abstract object connecting two vertices, unlike polygon and polyhedron edges which have a concrete geometric representation as a line segment. However, any polyhedron can be represented by its skeleton or edge-skeleton, conversely, the graphs that are skeletons of three-dimensional polyhedra can be characterized by Steinitzs theorem as being exactly the 3-vertex-connected planar graphs. Any convex polyhedrons surface has Euler characteristic V − E + F =2, where V is the number of vertices, E is the number of edges and this equation is known as Eulers polyhedron formula. Thus the number of edges is 2 less than the sum of the numbers of vertices and faces, for example, a cube has 8 vertices and 6 faces, and hence 12 edges. In a polygon, two edges meet at each vertex, more generally, by Balinskis theorem, at least d edges meet at every vertex of a convex polytope. Similarly, in a polyhedron, exactly two faces meet at every edge, while in higher dimensional polytopes three or more two-dimensional faces meet at every edge. Thus, the edges of a polygon are its facets, the edges of a 3-dimensional convex polyhedron are its ridges, archived from the original on 4 February 2007
18.
Face (geometry)
–
In solid geometry, a face is a flat surface that forms part of the boundary of a solid object, a three-dimensional solid bounded exclusively by flat faces is a polyhedron. In more technical treatments of the geometry of polyhedra and higher-dimensional polytopes, in elementary geometry, a face is a polygon on the boundary of a polyhedron. Other names for a polygonal face include side of a polyhedron, for example, any of the six squares that bound a cube is a face of the cube. Sometimes face is used to refer to the 2-dimensional features of a 4-polytope. With this meaning, the 4-dimensional tesseract has 24 square faces, some other polygons, which are not faces, are also important for polyhedra and tessellations. These include Petrie polygons, vertex figures and facets, any convex polyhedrons surface has Euler characteristic V − E + F =2, where V is the number of vertices, E is the number of edges, and F is the number of faces. This equation is known as Eulers polyhedron formula, thus the number of faces is 2 more than the excess of the number of edges over the number of vertices. For example, a cube has 12 edges and 8 vertices, in higher-dimensional geometry the faces of a polytope are features of all dimensions. A face of dimension k is called a k-face, for example, the polygonal faces of an ordinary polyhedron are 2-faces. In set theory, the set of faces of a polytope includes the polytope itself, for any n-polytope, −1 ≤ k ≤ n. For example, with meaning, the faces of a cube include the empty set, its vertices, edges and squares. Formally, a face of a polytope P is the intersection of P with any closed halfspace whose boundary is disjoint from the interior of P, from this definition it follows that the set of faces of a polytope includes the polytope itself and the empty set. In other areas of mathematics, such as the theories of abstract polytopes and star polytopes, abstract theory still requires that the set of faces include the polytope itself and the empty set. A cell is an element of a 4-dimensional polytope or 3-dimensional tessellation. Cells are facets for 4-polytopes and 3-honeycombs, examples, In higher-dimensional geometry, the facets of a n-polytope are the -faces of dimension one less than the polytope itself. A polytope is bounded by its facets, for example, The facets of a line segment are its 0-faces or vertices. The facets of a polygon are its 1-faces or edges, the facets of a polyhedron or plane tiling are its 2-faces. The facets of a 4D polytope or 3-honeycomb are its 3-faces, the facets of a 5D polytope or 4-honeycomb are its 4-faces
19.
Tetrahedron
–
In geometry, a tetrahedron, also known as a triangular pyramid, is a polyhedron composed of four triangular faces, six straight edges, and four vertex corners. The tetrahedron is the simplest of all the ordinary convex polyhedra, the tetrahedron is the three-dimensional case of the more general concept of a Euclidean simplex. The tetrahedron is one kind of pyramid, which is a polyhedron with a polygon base. In the case of a tetrahedron the base is a triangle, like all convex polyhedra, a tetrahedron can be folded from a single sheet of paper. For any tetrahedron there exists a sphere on which all four vertices lie, a regular tetrahedron is one in which all four faces are equilateral triangles. It is one of the five regular Platonic solids, which have known since antiquity. In a regular tetrahedron, not only are all its faces the same size and shape, regular tetrahedra alone do not tessellate, but if alternated with regular octahedra they form the alternated cubic honeycomb, which is a tessellation. The regular tetrahedron is self-dual, which means that its dual is another regular tetrahedron, the compound figure comprising two such dual tetrahedra form a stellated octahedron or stella octangula. This form has Coxeter diagram and Schläfli symbol h, the tetrahedron in this case has edge length 2√2. Inverting these coordinates generates the dual tetrahedron, and the together form the stellated octahedron. In other words, if C is the centroid of the base and this follows from the fact that the medians of a triangle intersect at its centroid, and this point divides each of them in two segments, one of which is twice as long as the other. The vertices of a cube can be grouped into two groups of four, each forming a regular tetrahedron, the symmetries of a regular tetrahedron correspond to half of those of a cube, those that map the tetrahedra to themselves, and not to each other. The tetrahedron is the only Platonic solid that is not mapped to itself by point inversion, the regular tetrahedron has 24 isometries, forming the symmetry group Td, isomorphic to the symmetric group, S4. The first corresponds to the A2 Coxeter plane, the two skew perpendicular opposite edges of a regular tetrahedron define a set of parallel planes. When one of these intersects the tetrahedron the resulting cross section is a rectangle. When the intersecting plane is one of the edges the rectangle is long. When halfway between the two edges the intersection is a square, the aspect ratio of the rectangle reverses as you pass this halfway point. For the midpoint square intersection the resulting boundary line traverses every face of the tetrahedron similarly, if the tetrahedron is bisected on this plane, both halves become wedges
20.
Cell (mathematics)
–
In solid geometry, a face is a flat surface that forms part of the boundary of a solid object, a three-dimensional solid bounded exclusively by flat faces is a polyhedron. In more technical treatments of the geometry of polyhedra and higher-dimensional polytopes, in elementary geometry, a face is a polygon on the boundary of a polyhedron. Other names for a polygonal face include side of a polyhedron, for example, any of the six squares that bound a cube is a face of the cube. Sometimes face is used to refer to the 2-dimensional features of a 4-polytope. With this meaning, the 4-dimensional tesseract has 24 square faces, some other polygons, which are not faces, are also important for polyhedra and tessellations. These include Petrie polygons, vertex figures and facets, any convex polyhedrons surface has Euler characteristic V − E + F =2, where V is the number of vertices, E is the number of edges, and F is the number of faces. This equation is known as Eulers polyhedron formula, thus the number of faces is 2 more than the excess of the number of edges over the number of vertices. For example, a cube has 12 edges and 8 vertices, in higher-dimensional geometry the faces of a polytope are features of all dimensions. A face of dimension k is called a k-face, for example, the polygonal faces of an ordinary polyhedron are 2-faces. In set theory, the set of faces of a polytope includes the polytope itself, for any n-polytope, −1 ≤ k ≤ n. For example, with meaning, the faces of a cube include the empty set, its vertices, edges and squares. Formally, a face of a polytope P is the intersection of P with any closed halfspace whose boundary is disjoint from the interior of P, from this definition it follows that the set of faces of a polytope includes the polytope itself and the empty set. In other areas of mathematics, such as the theories of abstract polytopes and star polytopes, abstract theory still requires that the set of faces include the polytope itself and the empty set. A cell is an element of a 4-dimensional polytope or 3-dimensional tessellation. Cells are facets for 4-polytopes and 3-honeycombs, examples, In higher-dimensional geometry, the facets of a n-polytope are the -faces of dimension one less than the polytope itself. A polytope is bounded by its facets, for example, The facets of a line segment are its 0-faces or vertices. The facets of a polygon are its 1-faces or edges, the facets of a polyhedron or plane tiling are its 2-faces. The facets of a 4D polytope or 3-honeycomb are its 3-faces, the facets of a 5D polytope or 4-honeycomb are its 4-faces
21.
5-cell
–
In geometry, the 5-cell is a four-dimensional object bounded by 5 tetrahedral cells. It is also known as a C5, pentachoron, pentatope, pentahedroid and it is a 4-simplex, the simplest possible convex regular 4-polytope, and is analogous to the tetrahedron in three dimensions and the triangle in two dimensions. The pentachoron is a four dimensional pyramid with a tetrahedral base, the regular 5-cell is bounded by regular tetrahedra, and is one of the six regular convex 4-polytopes, represented by Schläfli symbol. Pentachoron 4-simplex Pentatope Pentahedroid Pen Hyperpyramid, tetrahedral pyramid The 5-cell is self-dual and its maximal intersection with 3-dimensional space is the triangular prism. Its dihedral angle is cos−1, or approximately 75. 52°, the 5-cell can be constructed from a tetrahedron by adding a 5th vertex such that it is equidistant from all the other vertices of the tetrahedron. The simplest set of coordinates is, with edge length 2√2, a 5-cell can be constructed as a Boerdijk–Coxeter helix of five chained tetrahedra, folded into a 4-dimensional ring. The 10 triangle faces can be seen in a 2D net within a triangular tiling, with 6 triangles around every vertex, the purple edges represent the Petrie polygon of the 5-cell. The A4 Coxeter plane projects the 5-cell into a regular pentagon, the four sides of the pyramid are made of tetrahedron cells. Many uniform 5-polytopes have tetrahedral pyramid vertex figures, Other uniform 5-polytopes have irregular 5-cell vertex figures, the symmetry of a vertex figure of a uniform polytope is represented by removing the ringed nodes of the Coxeter diagram. The compound of two 5-cells in dual configurations can be seen in this A5 Coxeter plane projection, with a red and this compound has symmetry, order 240. The intersection of these two 5-cells is a uniform birectified 5-cell, the pentachoron is the simplest of 9 uniform polychora constructed from the Coxeter group. It is in the sequence of regular polychora, the tesseract, 120-cell, of Euclidean 4-space, all of these have a tetrahedral vertex figure. It is similar to three regular polychora, the tesseract, 600-cell of Euclidean 4-space, and the order-6 tetrahedral honeycomb of hyperbolic space, all of these have a tetrahedral cell. T. Gosset, On the Regular and Semi-Regular Figures in Space of n Dimensions, Messenger of Mathematics, Macmillan,1900 H. S. M. Coxeter, Coxeter, Regular Polytopes, Dover edition, ISBN 0-486-61480-8, p.296, Table I, Regular Polytopes, three regular polytopes in n-dimensions H. S. M. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973, p.296, Table I, Regular Polytopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D
22.
Dihedral angle
–
A dihedral angle is the angle between two intersecting planes. In chemistry it is the angle between planes through two sets of three atoms, having two atoms in common, in solid geometry it is defined as the union of a line and two half-planes that have this line as a common edge. In higher dimension, a dihedral angle represents the angle between two hyperplanes, a dihedral angle is an angle between two intersecting planes on a third plane perpendicular to the line of intersection. A torsion angle is an example of a dihedral angle. In stereochemistry every set of three atoms of a molecule defines a plane, when two such planes intersect, the angle between them is a dihedral angle. Dihedral angles are used to specify the molecular conformation, stereochemical arrangements corresponding to angles between 0° and ±90° are called syn, those corresponding to angles between ±90° and 180° anti. Similarly, arrangements corresponding to angles between 30° and 150° or between −30° and −150° are called clinal and those between 0° and ±30° or ±150° and 180° are called periplanar. The synperiplanar conformation is also known as the syn- or cis-conformation, antiperiplanar as anti or trans, for example, with n-butane two planes can be specified in terms of the two central carbon atoms and either of the methyl carbon atoms. The syn-conformation shown above, with an angle of 60° is less stable than the anti-configuration with a dihedral angle of 180°. For macromolecular usage the symbols T, C, G+, G−, A+, a Ramachandran plot, originally developed in 1963 by G. N. Ramachandran, C. Ramakrishnan, and V. Sasisekharan, is a way to visualize energetically allowed regions for backbone dihedral angles ψ against φ of amino acid residues in protein structure, the figure at right illustrates the definition of the φ and ψ backbone dihedral angles. In a protein chain three dihedral angles are defined as φ, ψ and ω, as shown in the diagram, the planarity of the peptide bond usually restricts ω to be 180° or 0°. The distance between the Cα atoms in the trans and cis isomers is approximately 3.8 and 2.9 Å, the cis isomer is mainly observed in Xaa–Pro peptide bonds. The sidechain dihedral angles tend to cluster near 180°, 60°, and −60°, which are called the trans, gauche+, the stability of certain sidechain dihedral angles is affected by the values φ and ψ. For instance, there are steric interactions between the Cγ of the side chain in the gauche+ rotamer and the backbone nitrogen of the next residue when ψ is near -60°. An alternative method is to calculate the angle between the vectors, nA and nB, which are normal to the planes. Cos φ = − n A ⋅ n B | n A | | n B | where nA · nB is the dot product of the vectors and |nA| |nB| is the product of their lengths. Any plane can also be described by two non-collinear vectors lying in that plane, taking their cross product yields a vector to the plane
23.
5-polytope
–
In five-dimensional geometry, a five-dimensional polytope or 5-polytope is a 5-dimensional polytope, bounded by facets. Each polyhedral cell being shared by exactly two 4-polytope facets, a 5-polytope is a closed five-dimensional figure with vertices, edges, faces, and cells, and 4-faces. A vertex is a point where five or more edges meet, an edge is a line segment where four or more faces meet, and a face is a polygon where three or more cells meet. A cell is a polyhedron, and a 4-face is a 4-polytope, furthermore, the following requirements must be met, Each cell must join exactly two 4-faces. Adjacent 4-faces are not in the same four-dimensional hyperplane, the figure is not a compound of other figures which meet the requirements. The topology of any given 5-polytope is defined by its Betti numbers, the value of the Euler characteristic used to characterise polyhedra does not generalize usefully to higher dimensions, whatever their underlying topology. This inadequacy of the Euler characteristic to distinguish between different topologies in higher dimensions led to the discovery of the more sophisticated Betti numbers. Similarly, the notion of orientability of a polyhedron is insufficient to characterise the surface twistings of toroidal polytopes, 5-polytopes may be classified based on properties like convexity and symmetry. Self-intersecting 5-polytopes are also known as star polytopes, from analogy with the shapes of the non-convex Kepler-Poinsot polyhedra. A uniform 5-polytope has a group under which all vertices are equivalent. The faces of a uniform polytope must be regular, a semi-regular 5-polytope contains two or more types of regular 4-polytope facets. There is only one figure, called a demipenteract. A regular 5-polytope has all identical regular 4-polytope facets, a prismatic 5-polytope is constructed by a Cartesian product of two lower-dimensional polytopes. A prismatic 5-polytope is uniform if its factors are uniform, the hypercube is prismatic, but is considered separately because it has symmetries other than those inherited from its factors. A 4-space tessellation is the division of four-dimensional Euclidean space into a grid of polychoral facets. Strictly speaking, tessellations are not polytopes as they do not bound a 5D volume, a uniform 4-space tessellation is one whose vertices are related by a space group and whose facets are uniform 4-polytopes. Regular 5-polytopes can be represented by the Schläfli symbol, with s polychoral facets around each face, the 5-demicube honeycomb, vertex figure is a rectified 5-orthoplex and facets are the 5-orthoplex and 5-demicube. Pyramidal 5-polytopes, or 5-pyramids, can be generated by a 4-polytope base in a 4-space hyperplane connected to a point off the hyperplane, the 5-simplex is the simplest example with a 4-simplex base
24.
Greek language
–
Greek is an independent branch of the Indo-European family of languages, native to Greece and other parts of the Eastern Mediterranean. It has the longest documented history of any living language, spanning 34 centuries of written records and its writing system has been the Greek alphabet for the major part of its history, other systems, such as Linear B and the Cypriot syllabary, were used previously. The alphabet arose from the Phoenician script and was in turn the basis of the Latin, Cyrillic, Armenian, Coptic, Gothic and many other writing systems. Together with the Latin texts and traditions of the Roman world, during antiquity, Greek was a widely spoken lingua franca in the Mediterranean world and many places beyond. It would eventually become the official parlance of the Byzantine Empire, the language is spoken by at least 13.2 million people today in Greece, Cyprus, Italy, Albania, Turkey, and the Greek diaspora. Greek roots are used to coin new words for other languages, Greek. Greek has been spoken in the Balkan peninsula since around the 3rd millennium BC, the earliest written evidence is a Linear B clay tablet found in Messenia that dates to between 1450 and 1350 BC, making Greek the worlds oldest recorded living language. Among the Indo-European languages, its date of earliest written attestation is matched only by the now extinct Anatolian languages, the Greek language is conventionally divided into the following periods, Proto-Greek, the unrecorded but assumed last ancestor of all known varieties of Greek. The unity of Proto-Greek would have ended as Hellenic migrants entered the Greek peninsula sometime in the Neolithic era or the Bronze Age, Mycenaean Greek, the language of the Mycenaean civilisation. It is recorded in the Linear B script on tablets dating from the 15th century BC onwards, Ancient Greek, in its various dialects, the language of the Archaic and Classical periods of the ancient Greek civilisation. It was widely known throughout the Roman Empire, after the Roman conquest of Greece, an unofficial bilingualism of Greek and Latin was established in the city of Rome and Koine Greek became a first or second language in the Roman Empire. The origin of Christianity can also be traced through Koine Greek, Medieval Greek, also known as Byzantine Greek, the continuation of Koine Greek in Byzantine Greece, up to the demise of the Byzantine Empire in the 15th century. Much of the written Greek that was used as the language of the Byzantine Empire was an eclectic middle-ground variety based on the tradition of written Koine. Modern Greek, Stemming from Medieval Greek, Modern Greek usages can be traced in the Byzantine period and it is the language used by the modern Greeks, and, apart from Standard Modern Greek, there are several dialects of it. In the modern era, the Greek language entered a state of diglossia, the historical unity and continuing identity between the various stages of the Greek language is often emphasised. Greek speakers today still tend to regard literary works of ancient Greek as part of their own rather than a foreign language and it is also often stated that the historical changes have been relatively slight compared with some other languages. According to one estimation, Homeric Greek is probably closer to demotic than 12-century Middle English is to modern spoken English, Greek is spoken by about 13 million people, mainly in Greece, Albania and Cyprus, but also worldwide by the large Greek diaspora. Greek is the language of Greece, where it is spoken by almost the entire population
25.
F-vector
–
In mathematics, a simplicial complex is a set composed of points, line segments, triangles, and their n-dimensional counterparts. Simplicial complexes should not be confused with the abstract notion of a simplicial set appearing in modern simplicial homotopy theory. The purely combinatorial counterpart to a complex is an abstract simplicial complex. A simplicial complex K is a set of simplices that satisfies the conditions,1. Any face of a simplex from K is also in K.2, the intersection of any two simplices σ1, σ2 ∈ K is either ∅ or a face of both σ1 and σ2. Note that the empty set is a face of every simplex, see also the definition of an abstract simplicial complex, which loosely speaking is a simplicial complex without an associated geometry. A simplicial k-complex K is a complex where the largest dimension of any simplex in K equals k. For instance, a simplicial 2-complex must contain at least one triangle, a pure or homogeneous simplicial k-complex K is a simplicial complex where every simplex of dimension less than k is a face of some simplex σ ∈ K of dimension exactly k. Informally, a pure 1-complex looks like its made of a bunch of lines, an example of a non-homogeneous complex is a triangle with a line segment attached to one of its vertices. A facet is any simplex in a complex that is not a face of any larger simplex, a pure simplicial complex can be thought of as a complex where all facets have the same dimension. Sometimes the term face is used to refer to a simplex of a complex, for a simplicial complex embedded in a k-dimensional space, the k-faces are sometimes referred to as its cells. The term cell is used in a broader sense to denote a set homeomorphic to a simplex. The underlying space, sometimes called the carrier of a complex is the union of its simplices. Let K be a complex and let S be a collection of simplices in K. The closure of S is the smallest simplicial subcomplex of K that contains each simplex in S. Cl S is obtained by adding to S each face of every simplex in S. The star of S is the union of the stars of each simplex in S, for a single simplex s, the star of s is the set of simplices having a face in s. The link of S equals Cl St S − St Cl S and it is the closed star of S minus the stars of all faces of S. In algebraic topology, simplicial complexes are useful for concrete calculations
26.
Cartesian coordinate
–
Each reference line is called a coordinate axis or just axis of the system, and the point where they meet is its origin, usually at ordered pair. The coordinates can also be defined as the positions of the projections of the point onto the two axis, expressed as signed distances from the origin. One can use the principle to specify the position of any point in three-dimensional space by three Cartesian coordinates, its signed distances to three mutually perpendicular planes. In general, n Cartesian coordinates specify the point in an n-dimensional Euclidean space for any dimension n and these coordinates are equal, up to sign, to distances from the point to n mutually perpendicular hyperplanes. The invention of Cartesian coordinates in the 17th century by René Descartes revolutionized mathematics by providing the first systematic link between Euclidean geometry and algebra. Using the Cartesian coordinate system, geometric shapes can be described by Cartesian equations, algebraic equations involving the coordinates of the points lying on the shape. For example, a circle of radius 2, centered at the origin of the plane, a familiar example is the concept of the graph of a function. Cartesian coordinates are also tools for most applied disciplines that deal with geometry, including astronomy, physics, engineering. They are the most common system used in computer graphics, computer-aided geometric design. Nicole Oresme, a French cleric and friend of the Dauphin of the 14th Century, used similar to Cartesian coordinates well before the time of Descartes. The adjective Cartesian refers to the French mathematician and philosopher René Descartes who published this idea in 1637 and it was independently discovered by Pierre de Fermat, who also worked in three dimensions, although Fermat did not publish the discovery. Both authors used a single axis in their treatments and have a length measured in reference to this axis. The concept of using a pair of axes was introduced later, after Descartes La Géométrie was translated into Latin in 1649 by Frans van Schooten and these commentators introduced several concepts while trying to clarify the ideas contained in Descartes work. Many other coordinate systems have developed since Descartes, such as the polar coordinates for the plane. The development of the Cartesian coordinate system would play a role in the development of the Calculus by Isaac Newton. The two-coordinate description of the plane was later generalized into the concept of vector spaces. Choosing a Cartesian coordinate system for a one-dimensional space – that is, for a straight line—involves choosing a point O of the line, a unit of length, and an orientation for the line. An orientation chooses which of the two half-lines determined by O is the positive, and which is negative, we say that the line is oriented from the negative half towards the positive half
27.
7-orthoplex
–
In geometry, a 7-orthoplex, or 7-cross polytope, is a regular 7-polytope with 14 vertices,84 edges,280 triangle faces,560 tetrahedron cells,672 5-cells 4-faces,448 5-faces, and 128 6-faces. It has two constructed forms, the first being regular with Schläfli symbol, and the second with alternately labeled facets and it is a part of an infinite family of polytopes, called cross-polytopes or orthoplexes. The dual polytope is the 7-hypercube, or hepteract, heptacross, derived from combining the family name cross polytope with hept for seven in Greek. A lowest symmetry construction is based on a dual of a 7-orthotope, cartesian coordinates for the vertices of a 7-orthoplex, centered at the origin are, Every vertex pair is connected by an edge, except opposites. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, 7D uniform polytopes x3o3o3o3o3o4o - zee. Archived from the original on 4 February 2007, Polytopes of Various Dimensions Multi-dimensional Glossary
28.
Coxeter plane
–
In mathematics, the Coxeter number h is the order of a Coxeter element of an irreducible Coxeter group. Note that this assumes a finite Coxeter group. For infinite Coxeter groups, there are multiple classes of Coxeter elements. There are many different ways to define the Coxeter number h of a root system. A Coxeter element is a product of all simple reflections, the product depends on the order in which they are taken, but different orderings produce conjugate elements, which have the same order. The Coxeter number is the number of roots divided by the rank, the number of reflections in the Coxeter group is half the number of roots. The Coxeter number is the order of any Coxeter element, if the highest root is ∑miαi for simple roots αi, then the Coxeter number is 1 + ∑mi The dimension of the corresponding Lie algebra is n, where n is the rank and h is the Coxeter number. The Coxeter number is the highest degree of an invariant of the Coxeter group acting on polynomials. Notice that if m is a degree of a fundamental invariant then so is h +2 − m, the eigenvalues of a Coxeter element are the numbers e2πi/h as m runs through the degrees of the fundamental invariants. Since this starts with m =2, these include the primitive hth root of unity, ζh = e2πi/h, an example, has h=30, so 64*30/g =12 -3 -6 -5 + 4/3 + 4/5 = 2/15, so g = 1920*15/2= 960*15 =14400. Coxeter elements of A n −1 ≅ S n, considered as the group on n elements, are n-cycles, for simple reflections the adjacent transpositions, …. The dihedral group Dihm is generated by two reflections that form an angle of 2 π /2 m, and thus their product is a rotation by 2 π / m. For a given Coxeter element w, there is a unique plane P on which w acts by rotation by 2π/h and this is called the Coxeter plane and is the plane on which P has eigenvalues e2πi/h and e−2πi/h = e2πi/h. This plane was first systematically studied in, and subsequently used in to provide uniform proofs about properties of Coxeter elements, for polytopes, a vertex may map to zero, as depicted below. Projections onto the Coxeter plane are depicted below for the Platonic solids, in three dimensions, the symmetry of a regular polyhedron, with one directed petrie polygon marked, defined as a composite of 3 reflections, has rotoinversion symmetry Sh, order h. Adding a mirror, the symmetry can be doubled to symmetry, Dhd. In orthogonal 2D projection, this becomes dihedral symmetry, Dihh, in four dimension, the symmetry of a regular polychoron, with one directed petrie polygon marked is a double rotation, defined as a composite of 4 reflections, with symmetry +1/h, order h. In five dimension, the symmetry of a regular polyteron, with one directed petrie polygon marked, is represented by the composite of 5 reflections
29.
Dihedral symmetry
–
In mathematics, a dihedral group is the group of symmetries of a regular polygon, which includes rotations and reflections. Dihedral groups are among the simplest examples of groups, and they play an important role in group theory, geometry. The notation for the group of order n differs in geometry. In geometry, Dn or Dihn refers to the symmetries of the n-gon, in abstract algebra, Dn refers to the dihedral group of order n. The geometric convention is used in this article, a regular polygon with n sides has 2 n different symmetries, n rotational symmetries and n reflection symmetries. Usually, we take n ≥3 here. The associated rotations and reflections make up the dihedral group D n, if n is odd, each axis of symmetry connects the midpoint of one side to the opposite vertex. If n is even, there are n/2 axes of symmetry connecting the midpoints of opposite sides, in either case, there are n axes of symmetry and 2 n elements in the symmetry group. Reflecting in one axis of symmetry followed by reflecting in another axis of symmetry produces a rotation through twice the angle between the axes, as with any geometric object, the composition of two symmetries of a regular polygon is again a symmetry of this object. With composition of symmetries to produce another as the binary operation, the following Cayley table shows the effect of composition in the group D3. R0 denotes the identity, r1 and r2 denote counterclockwise rotations by 120° and 240° respectively, for example, s2s1 = r1, because the reflection s1 followed by the reflection s2 results in a rotation of 120°. The order of elements denoting the composition is right to left, the composition operation is not commutative. In all cases, addition and subtraction of subscripts are to be performed using modular arithmetic with modulus n, if we center the regular polygon at the origin, then elements of the dihedral group act as linear transformations of the plane. This lets us represent elements of Dn as matrices, with composition being matrix multiplication and this is an example of a group representation. For example, the elements of the group D4 can be represented by the eight matrices. In general, the matrices for elements of Dn have the following form, rk is a rotation matrix, expressing a counterclockwise rotation through an angle of 2πk/n. Sk is a reflection across a line makes an angle of πk/n with the x-axis. Further equivalent definitions of Dn are, D1 is isomorphic to Z2, D2 is isomorphic to K4, the Klein four-group. D1 and D2 are exceptional in that, D1 and D2 are the only abelian dihedral groups, Dn is a subgroup of the symmetric group Sn for n ≥3
30.
Uniform 6-polytope
–
In six-dimensional geometry, a uniform polypeton is a six-dimensional uniform polytope. A uniform polypeton is vertex-transitive, and all facets are uniform 5-polytopes, the complete set of convex uniform polypeta has not been determined, but most can be made as Wythoff constructions from a small set of symmetry groups. These construction operations are represented by the permutations of rings of the Coxeter-Dynkin diagrams, each combination of at least one ring on every connected group of nodes in the diagram produces a uniform 6-polytope. The simplest uniform polypeta are regular polytopes, the 6-simplex, the 6-cube, Regular polytopes,1852, Ludwig Schläfli proved in his manuscript Theorie der vielfachen Kontinuität that there are exactly 3 regular polytopes in 5 or more dimensions. Convex uniform polytopes,1940, The search was expanded systematically by H. S. M, Coxeter in his publication Regular and Semi-Regular Polytopes. Nonregular uniform star polytopes, Ongoing, Thousands of nonconvex uniform polypeta are known, participating researchers include Jonathan Bowers, Richard Klitzing and Norman Johnson. Uniform 6-polytopes with reflective symmetry can be generated by these four Coxeter groups, There are four fundamental reflective symmety groups which generate 153 unique uniform 6-polytopes. Uniform prism There are 6 categorical uniform prisms based on the uniform 5-polytopes, Uniform duoprism There are 11 categorical uniform duoprismatic families of polytopes based on Cartesian products of lower-dimensional uniform polytopes. Each combination of at least one ring on every connected group produces a uniform prismatic 6-polytope, in addition, there are 105 uniform 6-polytope constructions based on prisms of the uniform 5-polytopes. In addition, there are many uniform 6-polytope based on. There are 32+4−1=35 forms, derived by marking one or more nodes of the Coxeter-Dynkin diagram and they are named by Norman Johnson from the Wythoff construction operations upon regular 6-simplex. Bowers-style acronym names are given in parentheses for cross-referencing, the A6 family has symmetry of order 5040. The coordinates of uniform 6-polytopes with 6-simplex symmetry can be generated as permutations of simple integers in 7-space, see also list of A6 polytopes for graphs of these polytopes. There are 63 forms based on all permutations of the Coxeter-Dynkin diagrams with one or more rings, the B6 family has symmetry of order 46080. They are named by Norman Johnson from the Wythoff construction operations upon the regular 6-cube, Bowers names and acronym names are given for cross-referencing. See also list of B6 polytopes for graphs of these polytopes, the D6 family has symmetry of order 23040. This family has 3×16−1=47 Wythoffian uniform polytopes, generated by marking one or more nodes of the D6 Coxeter-Dynkin diagram, of these,31 are repeated from the B6 family and 16 are unique to this family. The 16 unique forms are enumerated below, bowers-style acronym names are given for cross-referencing
31.
Rectified 6-simplex
–
In six-dimensional geometry, a rectified 6-simplex is a convex uniform 6-polytope, being a rectification of the regular 6-simplex. There are three degrees of rectifications, including the zeroth, the 6-simplex itself. Vertices of the rectified 6-simplex are located at the edge-centers of the 6-simplex, vertices of the birectified 6-simplex are located in the triangular face centers of the 6-simplex. E. L. Elte identified it in 1912 as a semiregular polytope and it is also called 04,1 for its branching Coxeter-Dynkin diagram, shown as. Rectified heptapeton The vertices of the rectified 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the rectified 7-orthoplex. E. L. Elte identified it in 1912 as a semiregular polytope and it is also called 03,2 for its branching Coxeter-Dynkin diagram, shown as. Birectified heptapeton The vertices of the birectified 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the birectified 7-orthoplex. The rectified 6-simplex polytope is the figure of the 7-demicube. These polytopes are a part of 35 uniform 6-polytopes based on the Coxeter group, Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Selected Writings of H. S. M. Coxeter, edited by F. Arthur Sherk, Peter McMullen, thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M. Coxeter, Regular and Semi Regular Polytopes I, H. S. M, Coxeter, Regular and Semi-Regular Polytopes II, H. S. M. Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D. O3x3o3o3o3o - ril, o3x3o3o3o3o - bril Olshevsky, George, archived from the original on 4 February 2007. Polytopes of Various Dimensions Multi-dimensional Glossary
32.
Birectified 6-simplex
–
In six-dimensional geometry, a rectified 6-simplex is a convex uniform 6-polytope, being a rectification of the regular 6-simplex. There are three degrees of rectifications, including the zeroth, the 6-simplex itself. Vertices of the rectified 6-simplex are located at the edge-centers of the 6-simplex, vertices of the birectified 6-simplex are located in the triangular face centers of the 6-simplex. E. L. Elte identified it in 1912 as a semiregular polytope and it is also called 04,1 for its branching Coxeter-Dynkin diagram, shown as. Rectified heptapeton The vertices of the rectified 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the rectified 7-orthoplex. E. L. Elte identified it in 1912 as a semiregular polytope and it is also called 03,2 for its branching Coxeter-Dynkin diagram, shown as. Birectified heptapeton The vertices of the birectified 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the birectified 7-orthoplex. The rectified 6-simplex polytope is the figure of the 7-demicube. These polytopes are a part of 35 uniform 6-polytopes based on the Coxeter group, Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Selected Writings of H. S. M. Coxeter, edited by F. Arthur Sherk, Peter McMullen, thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M. Coxeter, Regular and Semi Regular Polytopes I, H. S. M, Coxeter, Regular and Semi-Regular Polytopes II, H. S. M. Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D. O3x3o3o3o3o - ril, o3x3o3o3o3o - bril Olshevsky, George, archived from the original on 4 February 2007. Polytopes of Various Dimensions Multi-dimensional Glossary
33.
Truncated 6-simplex
–
In six-dimensional geometry, a truncated 6-simplex is a convex uniform 6-polytope, being a truncation of the regular 6-simplex. There are unique 3 degrees of truncation, vertices of the truncation 6-simplex are located as pairs on the edge of the 6-simplex. Vertices of the bitruncated 6-simplex are located on the faces of the 6-simplex. Vertices of the tritruncated 6-simplex are located inside the cells of the 6-simplex. Truncated heptapeton The vertices of the truncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the truncated 7-orthoplex. Bitruncated heptapeton The vertices of the bitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the bitruncated 7-orthoplex. The tritruncated 6-simplex is a uniform polytope, with 14 identical bitruncated 5-simplex facets. The tritruncated 6-simplex is the intersection of two 6-simplexes in dual configuration, and, tetradecapeton The vertices of the tritruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the bitruncated 7-orthoplex, alternately it can be centered on the origin as permutations of. Note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram, the truncated 6-simplex is one of 35 uniform 6-polytopes based on the Coxeter group, all shown here in A6 Coxeter plane orthographic projections. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, o3x3o3o3o3o - til, o3x3x3o3o3o - batal, o3o3x3x3o3o - fe Olshevsky, George. Archived from the original on 4 February 2007, Polytopes of Various Dimensions Multi-dimensional Glossary
34.
Cantellated 6-simplex
–
In six-dimensional geometry, a cantellated 6-simplex is a convex uniform 6-polytope, being a cantellation of the regular 6-simplex. There are unique 4 degrees of cantellation for the 6-simplex, including truncations, small rhombated heptapeton The vertices of the cantellated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the cantellated 7-orthoplex, small prismated heptapeton The vertices of the bicantellated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the bicantellated 7-orthoplex, great rhombated heptapeton The vertices of the cantitruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the cantitruncated 7-orthoplex, great birhombated heptapeton The vertices of the bicantitruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the bicantitruncated 7-orthoplex, the truncated 6-simplex is one of 35 uniform 6-polytopes based on the Coxeter group, all shown here in A6 Coxeter plane orthographic projections. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, x3o3x3o3o3o - sril, o3x3o3x3o3o - sabril, x3x3x3o3o3o - gril, o3x3x3x3o3o - gabril Olshevsky, George. Archived from the original on 4 February 2007, Polytopes of Various Dimensions Multi-dimensional Glossary
35.
Bitruncated 6-simplex
–
In six-dimensional geometry, a truncated 6-simplex is a convex uniform 6-polytope, being a truncation of the regular 6-simplex. There are unique 3 degrees of truncation, vertices of the truncation 6-simplex are located as pairs on the edge of the 6-simplex. Vertices of the bitruncated 6-simplex are located on the faces of the 6-simplex. Vertices of the tritruncated 6-simplex are located inside the cells of the 6-simplex. Truncated heptapeton The vertices of the truncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the truncated 7-orthoplex. Bitruncated heptapeton The vertices of the bitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the bitruncated 7-orthoplex. The tritruncated 6-simplex is a uniform polytope, with 14 identical bitruncated 5-simplex facets. The tritruncated 6-simplex is the intersection of two 6-simplexes in dual configuration, and, tetradecapeton The vertices of the tritruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the bitruncated 7-orthoplex, alternately it can be centered on the origin as permutations of. Note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram, the truncated 6-simplex is one of 35 uniform 6-polytopes based on the Coxeter group, all shown here in A6 Coxeter plane orthographic projections. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, o3x3o3o3o3o - til, o3x3x3o3o3o - batal, o3o3x3x3o3o - fe Olshevsky, George. Archived from the original on 4 February 2007, Polytopes of Various Dimensions Multi-dimensional Glossary
36.
Runcinated 6-simplex
–
In six-dimensional geometry, a runcinated 6-simplex is a convex uniform 6-polytope constructed as a runcination of the regular 6-simplex. There are 8 unique runcinations of the 6-simplex with permutations of truncations, small prismated heptapeton The vertices of the runcinated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the runcinated 7-orthoplex, small biprismated tetradecapeton The vertices of the biruncinted 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the biruncinated 7-orthoplex, note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram. Prismatotruncated heptapeton The vertices of the runcitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the runcitruncated 7-orthoplex. Biprismatorhombated heptapeton The vertices of the biruncitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the biruncitruncated 7-orthoplex. Prismatorhombated heptapeton The vertices of the runcicantellated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the runcicantellated 7-orthoplex. Runcicantitruncated heptapeton Great prismated heptapeton The vertices of the runcicantitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the runcicantitruncated 7-orthoplex. Biruncicantitruncated heptapeton Great biprismated tetradecapeton The vertices of the biruncicantittruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the biruncicantitruncated 7-orthoplex. Note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram, the truncated 6-simplex is one of 35 uniform 6-polytopes based on the Coxeter group, all shown here in A6 Coxeter plane orthographic projections. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, x3o3o3x3o3o - spil, o3x3o3o3x3o - sibpof, x3x3o3x3o3o - patal, o3x3x3o3x3o - bapril, x3o3x3x3o3o - pril, x3x3x3x3o3o - gapil, o3x3x3x3x3o - gibpof Olshevsky, George. Archived from the original on 4 February 2007, Polytopes of Various Dimensions Multi-dimensional Glossary
37.
Bicantellated 6-simplex
–
In six-dimensional geometry, a cantellated 6-simplex is a convex uniform 6-polytope, being a cantellation of the regular 6-simplex. There are unique 4 degrees of cantellation for the 6-simplex, including truncations, small rhombated heptapeton The vertices of the cantellated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the cantellated 7-orthoplex, small prismated heptapeton The vertices of the bicantellated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the bicantellated 7-orthoplex, great rhombated heptapeton The vertices of the cantitruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the cantitruncated 7-orthoplex, great birhombated heptapeton The vertices of the bicantitruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the bicantitruncated 7-orthoplex, the truncated 6-simplex is one of 35 uniform 6-polytopes based on the Coxeter group, all shown here in A6 Coxeter plane orthographic projections. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, x3o3x3o3o3o - sril, o3x3o3x3o3o - sabril, x3x3x3o3o3o - gril, o3x3x3x3o3o - gabril Olshevsky, George. Archived from the original on 4 February 2007, Polytopes of Various Dimensions Multi-dimensional Glossary
38.
Tritruncated 6-simplex
–
In six-dimensional geometry, a truncated 6-simplex is a convex uniform 6-polytope, being a truncation of the regular 6-simplex. There are unique 3 degrees of truncation, vertices of the truncation 6-simplex are located as pairs on the edge of the 6-simplex. Vertices of the bitruncated 6-simplex are located on the faces of the 6-simplex. Vertices of the tritruncated 6-simplex are located inside the cells of the 6-simplex. Truncated heptapeton The vertices of the truncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the truncated 7-orthoplex. Bitruncated heptapeton The vertices of the bitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the bitruncated 7-orthoplex. The tritruncated 6-simplex is a uniform polytope, with 14 identical bitruncated 5-simplex facets. The tritruncated 6-simplex is the intersection of two 6-simplexes in dual configuration, and, tetradecapeton The vertices of the tritruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the bitruncated 7-orthoplex, alternately it can be centered on the origin as permutations of. Note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram, the truncated 6-simplex is one of 35 uniform 6-polytopes based on the Coxeter group, all shown here in A6 Coxeter plane orthographic projections. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, o3x3o3o3o3o - til, o3x3x3o3o3o - batal, o3o3x3x3o3o - fe Olshevsky, George. Archived from the original on 4 February 2007, Polytopes of Various Dimensions Multi-dimensional Glossary
39.
Stericated 6-simplex
–
In six-dimensional geometry, a stericated 6-simplex is a convex uniform 6-polytope with 4th order truncations of the regular 6-simplex. There are 8 unique sterications for the 6-simplex with permutations of truncations, cantellations, small cellated heptapeton The vertices of the stericated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the stericated 7-orthoplex, cellirhombated heptapeton The vertices of the steritruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the steritruncated 7-orthoplex, cellirhombated heptapeton The vertices of the stericantellated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the stericantellated 7-orthoplex, celligreatorhombated heptapeton The vertices of the stericanttruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the stericantitruncated 7-orthoplex, celliprismated heptapeton The vertices of the steriruncinated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the steriruncinated 7-orthoplex, celliprismatotruncated heptapeton The vertices of the steriruncittruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the steriruncitruncated 7-orthoplex, bistericantitruncated 6-simplex as t1,2,3,5 Celliprismatorhombated heptapeton The vertices of the steriruncitcantellated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the steriruncicantellated 7-orthoplex, great cellated heptapeton The vertices of the steriruncicantittruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the steriruncicantitruncated 7-orthoplex, the truncated 6-simplex is one of 35 uniform 6-polytopes based on the Coxeter group, all shown here in A6 Coxeter plane orthographic projections. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, archived from the original on 4 February 2007. Polytopes of Various Dimensions Multi-dimensional Glossary
40.
Biruncinated 6-simplex
–
In six-dimensional geometry, a runcinated 6-simplex is a convex uniform 6-polytope constructed as a runcination of the regular 6-simplex. There are 8 unique runcinations of the 6-simplex with permutations of truncations, small prismated heptapeton The vertices of the runcinated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the runcinated 7-orthoplex, small biprismated tetradecapeton The vertices of the biruncinted 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the biruncinated 7-orthoplex, note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram. Prismatotruncated heptapeton The vertices of the runcitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the runcitruncated 7-orthoplex. Biprismatorhombated heptapeton The vertices of the biruncitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the biruncitruncated 7-orthoplex. Prismatorhombated heptapeton The vertices of the runcicantellated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the runcicantellated 7-orthoplex. Runcicantitruncated heptapeton Great prismated heptapeton The vertices of the runcicantitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the runcicantitruncated 7-orthoplex. Biruncicantitruncated heptapeton Great biprismated tetradecapeton The vertices of the biruncicantittruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the biruncicantitruncated 7-orthoplex. Note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram, the truncated 6-simplex is one of 35 uniform 6-polytopes based on the Coxeter group, all shown here in A6 Coxeter plane orthographic projections. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, x3o3o3x3o3o - spil, o3x3o3o3x3o - sibpof, x3x3o3x3o3o - patal, o3x3x3o3x3o - bapril, x3o3x3x3o3o - pril, x3x3x3x3o3o - gapil, o3x3x3x3x3o - gibpof Olshevsky, George. Archived from the original on 4 February 2007, Polytopes of Various Dimensions Multi-dimensional Glossary
41.
Pentellated 6-simplex
–
In six-dimensional geometry, a pentellated 6-simplex is a convex uniform 6-polytope with 5th order truncations of the regular 6-simplex. There are unique 10 degrees of pentellations of the 6-simplex with permutations of truncations, cantellations, runcinations, the simple pentellated 6-simplex is also called an expanded 6-simplex, constructed by an expansion operation applied to the regular 6-simplex. The highest form, the pentisteriruncicantitruncated 6-simplex, is called an omnitruncated 6-simplex with all of the nodes ringed, expanded 6-simplex Small terated tetradecapeton The vertices of the pentellated 6-simplex can be positioned in 7-space as permutations of. This construction is based on facets of the pentellated 7-orthoplex, a second construction in 7-space, from the center of a rectified 7-orthoplex is given by coordinate permutations of, Its 42 vertices represent the root vectors of the simple Lie group A6. It is the figure of the 6-simplex honeycomb. Note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram, teracellated heptapeton The vertices of the runcitruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the runcitruncated 7-orthoplex, teriprismated heptapeton The vertices of the runcicantellated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the penticantellated 7-orthoplex, terigreatorhombated heptapeton The vertices of the penticantitruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the penticantitruncated 7-orthoplex, tericellirhombated heptapeton The vertices of the pentiruncitruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the pentiruncitruncated 7-orthoplex, teriprismatorhombated tetradecapeton The vertices of the pentiruncicantellated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the pentiruncicantellated 7-orthoplex, note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram. Terigreatoprismated heptapeton The vertices of the pentiruncicantitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the pentiruncicantitruncated 7-orthoplex. Tericellitruncated tetradecapeton The vertices of the pentisteritruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the pentisteritruncated 7-orthoplex. Note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram, Great teracellirhombated heptapeton The vertices of the pentistericantittruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the pentistericantitruncated 7-orthoplex, the omnitruncated 6-simplex has 5040 vertices,15120 edges,16800 faces,8400 cells,1806 4-faces, and 126 5-faces. With 5040 vertices, it is the largest of 35 uniform 6-polytopes generated from the regular 6-simplex, pentisteriruncicantitruncated 6-simplex Omnitruncated heptapeton Great terated tetradecapeton The omnitruncated 6-simplex is the permutohedron of order 7. The omnitruncated 6-simplex is a zonotope, the Minkowski sum of seven line segments parallel to the seven lines through the origin, like all uniform omnitruncated n-simplices, the omnitruncated 6-simplex can tessellate space by itself, in this case 6-dimensional space with three facets around each hypercell. The vertices of the omnitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the pentisteriruncicantitruncated 7-orthoplex, t0,1,2,3,4,5
42.
Cantitruncated 6-simplex
–
In six-dimensional geometry, a cantellated 6-simplex is a convex uniform 6-polytope, being a cantellation of the regular 6-simplex. There are unique 4 degrees of cantellation for the 6-simplex, including truncations, small rhombated heptapeton The vertices of the cantellated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the cantellated 7-orthoplex, small prismated heptapeton The vertices of the bicantellated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the bicantellated 7-orthoplex, great rhombated heptapeton The vertices of the cantitruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the cantitruncated 7-orthoplex, great birhombated heptapeton The vertices of the bicantitruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the bicantitruncated 7-orthoplex, the truncated 6-simplex is one of 35 uniform 6-polytopes based on the Coxeter group, all shown here in A6 Coxeter plane orthographic projections. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, x3o3x3o3o3o - sril, o3x3o3x3o3o - sabril, x3x3x3o3o3o - gril, o3x3x3x3o3o - gabril Olshevsky, George. Archived from the original on 4 February 2007, Polytopes of Various Dimensions Multi-dimensional Glossary
43.
Runcitruncated 6-simplex
–
In six-dimensional geometry, a runcinated 6-simplex is a convex uniform 6-polytope constructed as a runcination of the regular 6-simplex. There are 8 unique runcinations of the 6-simplex with permutations of truncations, small prismated heptapeton The vertices of the runcinated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the runcinated 7-orthoplex, small biprismated tetradecapeton The vertices of the biruncinted 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the biruncinated 7-orthoplex, note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram. Prismatotruncated heptapeton The vertices of the runcitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the runcitruncated 7-orthoplex. Biprismatorhombated heptapeton The vertices of the biruncitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the biruncitruncated 7-orthoplex. Prismatorhombated heptapeton The vertices of the runcicantellated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the runcicantellated 7-orthoplex. Runcicantitruncated heptapeton Great prismated heptapeton The vertices of the runcicantitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the runcicantitruncated 7-orthoplex. Biruncicantitruncated heptapeton Great biprismated tetradecapeton The vertices of the biruncicantittruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the biruncicantitruncated 7-orthoplex. Note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram, the truncated 6-simplex is one of 35 uniform 6-polytopes based on the Coxeter group, all shown here in A6 Coxeter plane orthographic projections. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, x3o3o3x3o3o - spil, o3x3o3o3x3o - sibpof, x3x3o3x3o3o - patal, o3x3x3o3x3o - bapril, x3o3x3x3o3o - pril, x3x3x3x3o3o - gapil, o3x3x3x3x3o - gibpof Olshevsky, George. Archived from the original on 4 February 2007, Polytopes of Various Dimensions Multi-dimensional Glossary
44.
Runcicantellated 6-simplex
–
In six-dimensional geometry, a runcinated 6-simplex is a convex uniform 6-polytope constructed as a runcination of the regular 6-simplex. There are 8 unique runcinations of the 6-simplex with permutations of truncations, small prismated heptapeton The vertices of the runcinated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the runcinated 7-orthoplex, small biprismated tetradecapeton The vertices of the biruncinted 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the biruncinated 7-orthoplex, note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram. Prismatotruncated heptapeton The vertices of the runcitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the runcitruncated 7-orthoplex. Biprismatorhombated heptapeton The vertices of the biruncitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the biruncitruncated 7-orthoplex. Prismatorhombated heptapeton The vertices of the runcicantellated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the runcicantellated 7-orthoplex. Runcicantitruncated heptapeton Great prismated heptapeton The vertices of the runcicantitruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the runcicantitruncated 7-orthoplex. Biruncicantitruncated heptapeton Great biprismated tetradecapeton The vertices of the biruncicantittruncated 6-simplex can be most simply positioned in 7-space as permutations of and this construction is based on facets of the biruncicantitruncated 7-orthoplex. Note, Symmetry doubled for Ak graphs with even k due to symmetrically-ringed Coxeter-Dynkin diagram, the truncated 6-simplex is one of 35 uniform 6-polytopes based on the Coxeter group, all shown here in A6 Coxeter plane orthographic projections. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, x3o3o3x3o3o - spil, o3x3o3o3x3o - sibpof, x3x3o3x3o3o - patal, o3x3x3o3x3o - bapril, x3o3x3x3o3o - pril, x3x3x3x3o3o - gapil, o3x3x3x3x3o - gibpof Olshevsky, George. Archived from the original on 4 February 2007, Polytopes of Various Dimensions Multi-dimensional Glossary
45.
Bicantitruncated 6-simplex
–
In six-dimensional geometry, a cantellated 6-simplex is a convex uniform 6-polytope, being a cantellation of the regular 6-simplex. There are unique 4 degrees of cantellation for the 6-simplex, including truncations, small rhombated heptapeton The vertices of the cantellated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the cantellated 7-orthoplex, small prismated heptapeton The vertices of the bicantellated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the bicantellated 7-orthoplex, great rhombated heptapeton The vertices of the cantitruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the cantitruncated 7-orthoplex, great birhombated heptapeton The vertices of the bicantitruncated 6-simplex can be most simply positioned in 7-space as permutations of. This construction is based on facets of the bicantitruncated 7-orthoplex, the truncated 6-simplex is one of 35 uniform 6-polytopes based on the Coxeter group, all shown here in A6 Coxeter plane orthographic projections. Coxeter, Regular Polytopes, 3rd Edition, Dover New York,1973 Kaleidoscopes, Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication,1995, ISBN 978-0-471-01003-6 H. S. M, Coxeter, Regular and Semi Regular Polytopes I, H. S. M. Coxeter, Regular and Semi-Regular Polytopes II, H. S. M, Coxeter, Regular and Semi-Regular Polytopes III, Norman Johnson Uniform Polytopes, Manuscript N. W. Johnson, The Theory of Uniform Polytopes and Honeycombs, Ph. D, x3o3x3o3o3o - sril, o3x3o3x3o3o - sabril, x3x3x3o3o3o - gril, o3x3x3x3o3o - gabril Olshevsky, George. Archived from the original on 4 February 2007, Polytopes of Various Dimensions Multi-dimensional Glossary