From Wikipedia, the free encyclopedia
  (Redirected from 1,3-dicyclopentadiene)
Jump to: navigation, search
Stereo wireframe model of dicyclopentadiene.
Ball and stick model of dicyclopentadiene
IUPAC name
Other names
1,3-Dicyclopentadiene, Bicyclopentadiene, 3a,4,7,7a-Tetrahydro-4,7-methanoindene
3D model (JSmol)
Abbreviations DCPD
ECHA InfoCard 100.000.958
EC Number 201-052-9
MeSH Dicyclopentadiene
RTECS number PC1050000
UN number UN 2048
Molar mass 132.20 g/mol
Appearance Colorless, crystalline solid[2]
Odor disagreeable, camphor-like[2]
Density 0.978 g/cm3
Melting point 32.5 °C (90.5 °F; 305.6 K)
Boiling point 170 °C (338 °F; 443 K)
Solubility very soluble in ethyl ether, ethanol
soluble in acetone, dichloromethane, ethyl acetate, n-hexane, toluene
log P 2.78
Vapor pressure 180 Pa (20 °C)[2]
NFPA 704
Flammability code 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g., gasoline Health code 1: Exposure would cause irritation but only minor residual injury. E.g., turpentine Reactivity code 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g., calcium Special hazards (white): no codeNFPA 704 four-colored diamond
Flash point 32 °C (90 °F; 305 K)
503 °C (937 °F; 776 K)
Explosive limits 0.8%-6.3%[2]
US health exposure limits (NIOSH):
PEL (Permissible)
REL (Recommended)
TWA 5 ppm (30 mg/m3)[2]
IDLH (Immediate danger)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Dicyclopentadiene, abbreviated DCPD, is a chemical compound with formula C10H12. At room temperature, it is a clear light yellow color liquid with an acrid odor. Its energy density is 10,975 Wh/l. Dicyclopentadiene is coproduced in large quantities in the steam cracking of naphtha and gas oils to ethylene. The major use is in resins, particularly, unsaturated polyester resins. It is also used in inks, adhesives, and paints.

The top seven suppliers worldwide together had an annual capacity in 2001 of 179 kilotonnes (395 million pounds).


When heated above 150 °C, dicyclopentadiene undergoes a retro-Diels-Alder reaction to yield cyclopentadiene, a popular ligand in inorganic chemistry. The reaction is reversible and at room temperature cyclopentadiene slowly dimerizes to reform dicyclopentadiene.

Hydrogenation of dicyclopentadiene gives endo-tetrahydrodicyclopentadiene which on reaction with aluminium chloride at elevated temperature rearranges to adamantane.[3]

Dicyclopentadiene can be used as a monomer in polymerization reactions, either in olefin polymerization or in ring-opening metathesis polymerization. For example, using olefin polymerization catalysts, copolymers can be formed with ethylene or styrene by polymerizing only the norbornene double bond.[4] Using ring-opening metathesis polymerization the homopolymer polydicyclopentadiene is formed.


  1. ^ Merck Index, 11th Edition, 2744
  2. ^ a b c d e f g h "NIOSH Pocket Guide to Chemical Hazards #0204". National Institute for Occupational Safety and Health (NIOSH). 
  3. ^ Paul von R. Schleyer, M. M. Donaldson, R. D. Nicholas, and C. Cupas (1973). "Adamantane". Organic Syntheses.  ; Collective Volume, 5, p. 16 
  4. ^ Li, Xiaofang; Hou, Zhaomin (2005). "Scandium-Catalyzed Copolymerization of Ethylene with Dicyclopentadiene and Terpolymerization of Ethylene, Dicyclopentadiene, and Styrene". Macromolecules. 38 (16): 6767. doi:10.1021/ma051323o. 

External links[edit]