1.
Integer
–
An integer is a number that can be written without a fractional component. For example,21,4,0, and −2048 are integers, while 9.75, 5 1⁄2, the set of integers consists of zero, the positive natural numbers, also called whole numbers or counting numbers, and their additive inverses. This is often denoted by a boldface Z or blackboard bold Z standing for the German word Zahlen, ℤ is a subset of the sets of rational and real numbers and, like the natural numbers, is countably infinite. The integers form the smallest group and the smallest ring containing the natural numbers, in algebraic number theory, the integers are sometimes called rational integers to distinguish them from the more general algebraic integers. In fact, the integers are the integers that are also rational numbers. Like the natural numbers, Z is closed under the operations of addition and multiplication, that is, however, with the inclusion of the negative natural numbers, and, importantly,0, Z is also closed under subtraction. The integers form a ring which is the most basic one, in the following sense, for any unital ring. This universal property, namely to be an object in the category of rings. Z is not closed under division, since the quotient of two integers, need not be an integer, although the natural numbers are closed under exponentiation, the integers are not. The following lists some of the properties of addition and multiplication for any integers a, b and c. In the language of algebra, the first five properties listed above for addition say that Z under addition is an abelian group. As a group under addition, Z is a cyclic group, in fact, Z under addition is the only infinite cyclic group, in the sense that any infinite cyclic group is isomorphic to Z. The first four properties listed above for multiplication say that Z under multiplication is a commutative monoid. However, not every integer has an inverse, e. g. there is no integer x such that 2x =1, because the left hand side is even. This means that Z under multiplication is not a group, all the rules from the above property table, except for the last, taken together say that Z together with addition and multiplication is a commutative ring with unity. It is the prototype of all objects of algebraic structure. Only those equalities of expressions are true in Z for all values of variables, note that certain non-zero integers map to zero in certain rings. The lack of zero-divisors in the means that the commutative ring Z is an integral domain
2.
100 (number)
–
100 or one hundred is the natural number following 99 and preceding 101. In medieval contexts, it may be described as the hundred or five score in order to differentiate the English. The standard SI prefix for a hundred is hecto-,100 is the basis of percentages, with 100% being a full amount. 100 is the sum of the first nine prime numbers, as well as the sum of pairs of prime numbers e. g.3 +97,11 +89,17 +83,29 +71,41 +59. 100 is the sum of the cubes of the first four integers and this is related by Nicomachuss theorem to the fact that 100 also equals the square of the sum of the first four integers,100 =102 =2. 26 +62 =100, thus 100 is a Leyland number and it is divisible by the number of primes below it,25 in this case. It can not be expressed as the difference between any integer and the total of coprimes below it, making it a noncototient and it can be expressed as a sum of some of its divisors, making it a semiperfect number. 100 is a Harshad number in base 10, and also in base 4, there are exactly 100 prime numbers whose digits are in strictly ascending order. 100 is the smallest number whose common logarithm is a prime number,100 senators are in the U. S One hundred is the atomic number of fermium, an actinide. On the Celsius scale,100 degrees is the temperature of pure water at sea level. The Kármán line lies at an altitude of 100 kilometres above the Earths sea level and is used to define the boundary between Earths atmosphere and outer space. There are 100 blasts of the Shofar heard in the service of Rosh Hashana, a religious Jew is expected to utter at least 100 blessings daily. In Hindu Religion - Mythology Book Mahabharata - Dhritarashtra had 100 sons known as kauravas, the United States Senate has 100 Senators. Most of the currencies are divided into 100 subunits, for example, one euro is one hundred cents. The 100 Euro banknotes feature a picture of a Rococo gateway on the obverse, the U. S. hundred-dollar bill has Benjamin Franklins portrait, the Benjamin is the largest U. S. bill in print. American savings bonds of $100 have Thomas Jeffersons portrait, while American $100 treasury bonds have Andrew Jacksons portrait, One hundred is also, The number of years in a century. The number of pounds in an American short hundredweight, in Greece, India, Israel and Nepal,100 is the police telephone number. In Belgium,100 is the ambulance and firefighter telephone number, in United Kingdom,100 is the operator telephone number
3.
Factorization
–
In mathematics, factorization or factoring is the decomposition of an object into a product of other objects, or factors, which when multiplied together give the original. For example, the number 15 factors into primes as 3 ×5, in all cases, a product of simpler objects is obtained. The aim of factoring is usually to reduce something to “basic building blocks”, such as numbers to prime numbers, factoring integers is covered by the fundamental theorem of arithmetic and factoring polynomials by the fundamental theorem of algebra. Viètes formulas relate the coefficients of a polynomial to its roots, the opposite of polynomial factorization is expansion, the multiplying together of polynomial factors to an “expanded” polynomial, written as just a sum of terms. Integer factorization for large integers appears to be a difficult problem, there is no known method to carry it out quickly. Its complexity is the basis of the security of some public key cryptography algorithms. A matrix can also be factorized into a product of matrices of special types, One major example of this uses an orthogonal or unitary matrix, and a triangular matrix. There are different types, QR decomposition, LQ, QL, RQ and this situation is generalized by factorization systems. By the fundamental theorem of arithmetic, every integer greater than 1 has a unique prime factorization. Given an algorithm for integer factorization, one can factor any integer down to its constituent primes by repeated application of this algorithm, for very large numbers, no efficient classical algorithm is known. Modern techniques for factoring polynomials are fast and efficient, but use sophisticated mathematical ideas and these techniques are used in the construction of computer routines for carrying out polynomial factorization in Computer algebra systems. This article is concerned with classical techniques. While the general notion of factoring just means writing an expression as a product of simpler expressions, when factoring polynomials this means that the factors are to be polynomials of smaller degree. Thus, while x 2 − y = is a factorization of the expression, another issue concerns the coefficients of the factors. It is not always possible to do this, and a polynomial that can not be factored in this way is said to be irreducible over this type of coefficient, thus, x2 -2 is irreducible over the integers and x2 +4 is irreducible over the reals. In the first example, the integers 1 and -2 can also be thought of as real numbers, and if they are, then x 2 −2 = shows that this polynomial factors over the reals. Similarly, since the integers 1 and 4 can be thought of as real and hence complex numbers, x2 +4 splits over the complex numbers, i. e. x 2 +4 =. The fundamental theorem of algebra can be stated as, Every polynomial of n with complex number coefficients splits completely into n linear factors
4.
Greek numerals
–
Greek numerals are a system of writing numbers using the letters of the Greek alphabet. These alphabetic numerals are known as Ionic or Ionian numerals, Milesian numerals. In modern Greece, they are used for ordinal numbers. For ordinary cardinal numbers, however, Greece uses Arabic numerals, attic numerals, which were later adopted as the basis for Roman numerals, were the first alphabetic set. They were acrophonic, derived from the first letters of the names of the numbers represented and they ran =1, =5, =10, =100, =1000, and =10000. 50,500,5000, and 50000 were represented by the letter with minuscule powers of ten written in the top right corner, the same system was used outside of Attica, but the symbols varied with the local alphabets, in Boeotia, was 1000. The present system probably developed around Miletus in Ionia, 19th-century classicists placed its development in the 3rd century BC, the occasion of its first widespread use. The present system uses the 24 letters adopted by Euclid as well as three Phoenician and Ionic ones that were not carried over, digamma, koppa, and sampi. The position of characters within the numbering system imply that the first two were still in use while the third was not. Greek numerals are decimal, based on powers of 10, the units from 1 to 9 are assigned to the first nine letters of the old Ionic alphabet from alpha to theta. Each multiple of one hundred from 100 to 900 was then assigned its own separate letter as well and this alphabetic system operates on the additive principle in which the numeric values of the letters are added together to obtain the total. For example,241 was represented as, in ancient and medieval manuscripts, these numerals were eventually distinguished from letters using overbars, α, β, γ, etc. In medieval manuscripts of the Book of Revelation, the number of the Beast 666 is written as χξϛ, although the Greek alphabet began with only majuscule forms, surviving papyrus manuscripts from Egypt show that uncial and cursive minuscule forms began early. These new letter forms sometimes replaced the ones, especially in the case of the obscure numerals. The old Q-shaped koppa began to be broken up and simplified, the numeral for 6 changed several times. During antiquity, the letter form of digamma came to be avoided in favor of a special numerical one. By the Byzantine era, the letter was known as episemon and this eventually merged with the sigma-tau ligature stigma. In modern Greek, a number of changes have been made
5.
Roman numerals
–
The numeric system represented by Roman numerals originated in ancient Rome and remained the usual way of writing numbers throughout Europe well into the Late Middle Ages. Numbers in this system are represented by combinations of letters from the Latin alphabet, Roman numerals, as used today, are based on seven symbols, The use of Roman numerals continued long after the decline of the Roman Empire. The numbers 1 to 10 are usually expressed in Roman numerals as follows, I, II, III, IV, V, VI, VII, VIII, IX, Numbers are formed by combining symbols and adding the values, so II is two and XIII is thirteen. Symbols are placed left to right in order of value. Named after the year of its release,2014 as MMXIV, the year of the games of the XXII Olympic Winter Games The standard forms described above reflect typical modern usage rather than a universally accepted convention. Usage in ancient Rome varied greatly and remained inconsistent in medieval, Roman inscriptions, especially in official contexts, seem to show a preference for additive forms such as IIII and VIIII instead of subtractive forms such as IV and IX. Both methods appear in documents from the Roman era, even within the same document, double subtractives also occur, such as XIIX or even IIXX instead of XVIII. Sometimes V and L are not used, with such as IIIIII. Such variation and inconsistency continued through the period and into modern times. Clock faces that use Roman numerals normally show IIII for four o’clock but IX for nine o’clock, however, this is far from universal, for example, the clock on the Palace of Westminster in London uses IV. Similarly, at the beginning of the 20th century, different representations of 900 appeared in several inscribed dates. For instance,1910 is shown on Admiralty Arch, London, as MDCCCCX rather than MCMX, although Roman numerals came to be written with letters of the Roman alphabet, they were originally independent symbols. The Etruscans, for example, used
6.
Unicode
–
Unicode is a computing industry standard for the consistent encoding, representation, and handling of text expressed in most of the worlds writing systems. As of June 2016, the most recent version is Unicode 9.0, the standard is maintained by the Unicode Consortium. Unicodes success at unifying character sets has led to its widespread, the standard has been implemented in many recent technologies, including modern operating systems, XML, Java, and the. NET Framework. Unicode can be implemented by different character encodings, the most commonly used encodings are UTF-8, UTF-16 and the now-obsolete UCS-2. UTF-8 uses one byte for any ASCII character, all of which have the same values in both UTF-8 and ASCII encoding, and up to four bytes for other characters. UCS-2 uses a 16-bit code unit for each character but cannot encode every character in the current Unicode standard, UTF-16 extends UCS-2, using one 16-bit unit for the characters that were representable in UCS-2 and two 16-bit units to handle each of the additional characters. Many traditional character encodings share a common problem in that they allow bilingual computer processing, Unicode, in intent, encodes the underlying characters—graphemes and grapheme-like units—rather than the variant glyphs for such characters. In the case of Chinese characters, this leads to controversies over distinguishing the underlying character from its variant glyphs. In text processing, Unicode takes the role of providing a unique code point—a number, in other words, Unicode represents a character in an abstract way and leaves the visual rendering to other software, such as a web browser or word processor. This simple aim becomes complicated, however, because of concessions made by Unicodes designers in the hope of encouraging a more rapid adoption of Unicode, the first 256 code points were made identical to the content of ISO-8859-1 so as to make it trivial to convert existing western text. For other examples, see duplicate characters in Unicode and he explained that he name Unicode is intended to suggest a unique, unified, universal encoding. In this document, entitled Unicode 88, Becker outlined a 16-bit character model, Unicode could be roughly described as wide-body ASCII that has been stretched to 16 bits to encompass the characters of all the worlds living languages. In a properly engineered design,16 bits per character are more than sufficient for this purpose, Unicode aims in the first instance at the characters published in modern text, whose number is undoubtedly far below 214 =16,384. By the end of 1990, most of the work on mapping existing character encoding standards had been completed, the Unicode Consortium was incorporated in California on January 3,1991, and in October 1991, the first volume of the Unicode standard was published. The second volume, covering Han ideographs, was published in June 1992, in 1996, a surrogate character mechanism was implemented in Unicode 2.0, so that Unicode was no longer restricted to 16 bits. The Microsoft TrueType specification version 1.0 from 1992 used the name Apple Unicode instead of Unicode for the Platform ID in the naming table, Unicode defines a codespace of 1,114,112 code points in the range 0hex to 10FFFFhex. Normally a Unicode code point is referred to by writing U+ followed by its hexadecimal number, for code points in the Basic Multilingual Plane, four digits are used, for code points outside the BMP, five or six digits are used, as required. Code points in Planes 1 through 16 are accessed as surrogate pairs in UTF-16, within each plane, characters are allocated within named blocks of related characters
7.
Binary number
–
The base-2 system is a positional notation with a radix of 2. Because of its implementation in digital electronic circuitry using logic gates. Each digit is referred to as a bit, the modern binary number system was devised by Gottfried Leibniz in 1679 and appears in his article Explication de lArithmétique Binaire. Systems related to binary numbers have appeared earlier in multiple cultures including ancient Egypt, China, Leibniz was specifically inspired by the Chinese I Ching. The scribes of ancient Egypt used two different systems for their fractions, Egyptian fractions and Horus-Eye fractions, the method used for ancient Egyptian multiplication is also closely related to binary numbers. This method can be seen in use, for instance, in the Rhind Mathematical Papyrus, the I Ching dates from the 9th century BC in China. The binary notation in the I Ching is used to interpret its quaternary divination technique and it is based on taoistic duality of yin and yang. Eight trigrams and a set of 64 hexagrams, analogous to the three-bit and six-bit binary numerals, were in use at least as early as the Zhou Dynasty of ancient China. The Song Dynasty scholar Shao Yong rearranged the hexagrams in a format that resembles modern binary numbers, the Indian scholar Pingala developed a binary system for describing prosody. He used binary numbers in the form of short and long syllables, Pingalas Hindu classic titled Chandaḥśāstra describes the formation of a matrix in order to give a unique value to each meter. The binary representations in Pingalas system increases towards the right, the residents of the island of Mangareva in French Polynesia were using a hybrid binary-decimal system before 1450. Slit drums with binary tones are used to encode messages across Africa, sets of binary combinations similar to the I Ching have also been used in traditional African divination systems such as Ifá as well as in medieval Western geomancy. The base-2 system utilized in geomancy had long been applied in sub-Saharan Africa. Leibnizs system uses 0 and 1, like the modern binary numeral system, Leibniz was first introduced to the I Ching through his contact with the French Jesuit Joachim Bouvet, who visited China in 1685 as a missionary. Leibniz saw the I Ching hexagrams as an affirmation of the universality of his own beliefs as a Christian. Binary numerals were central to Leibnizs theology and he believed that binary numbers were symbolic of the Christian idea of creatio ex nihilo or creation out of nothing. Is not easy to impart to the pagans, is the ex nihilo through Gods almighty power. In 1854, British mathematician George Boole published a paper detailing an algebraic system of logic that would become known as Boolean algebra
8.
Ternary numeral system
–
The ternary numeral system has three as its base. Analogous to a bit, a digit is a trit. One trit is equivalent to bits of information. Representations of integer numbers in ternary do not get uncomfortably lengthy as quickly as in binary, for example, decimal 365 corresponds to binary 101101101 and to ternary 111112. However, they are far less compact than the corresponding representations in bases such as decimal – see below for a compact way to codify ternary using nonary. The value of a number with n bits that are all 1 is 2n −1. Then N = M, N = /, and N = bd −1, for a three-digit ternary number, N =33 −1 =26 =2 ×32 +2 ×31 +2 ×30 =18 +6 +2. Nonary or septemvigesimal can be used for representation of ternary. A base-three system is used in Islam to keep track of counting Tasbih to 99 or to 100 on a hand for counting prayers. In certain analog logic, the state of the circuit is often expressed ternary and this is most commonly seen in Transistor–transistor logic using 7406 open collector logic. The output is said to either be low, high, or open, in this configuration the output of the circuit is actually not connected to any voltage reference at all. Where the signal is usually grounded to a reference, or at a certain voltage level. Thus, the voltage level is sometimes unpredictable. A rare ternary point is used to denote fractional parts of an inning in baseball, since each inning consists of three outs, each out is considered one third of an inning and is denoted as.1. For example, if a player pitched all of the 4th, 5th and 6th innings, plus 2 outs of the 7th inning, his Innings pitched column for that game would be listed as 3.2, meaning 3⅔. In this usage, only the part of the number is written in ternary form. Ternary numbers can be used to convey self-similar structures like the Sierpinski triangle or the Cantor set conveniently, additionally, it turns out that the ternary representation is useful for defining the Cantor set and related point sets, because of the way the Cantor set is constructed. The Cantor set consists of the points from 0 to 1 that have an expression that does not contain any instance of the digit 1
9.
Quaternary numeral system
–
Quaternary is the base-4 numeral system. It uses the digits 0,1,2 and 3 to represent any real number. Four is the largest number within the range and one of two numbers that is both a square and a highly composite number, making quaternary a convenient choice for a base at this scale. Despite being twice as large, its economy is equal to that of binary. However, it no better in the localization of prime numbers. See decimal and binary for a discussion of these properties, as with the octal and hexadecimal numeral systems, quaternary has a special relation to the binary numeral system. Each radix 4,8 and 16 is a power of 2, so the conversion to and from binary is implemented by matching each digit with 2,3 or 4 binary digits, for example, in base 4,302104 =11001001002. Although octal and hexadecimal are widely used in computing and computer programming in the discussion and analysis of binary arithmetic and logic, by analogy with byte and nybble, a quaternary digit is sometimes called a crumb. There is a surviving list of Ventureño language number words up to 32 written down by a Spanish priest ca, the Kharosthi numerals have a partial base 4 counting system from 1 to decimal 10. Quaternary numbers are used in the representation of 2D Hilbert curves, here a real number between 0 and 1 is converted into the quaternary system. Every single digit now indicates in which of the respective 4 sub-quadrants the number will be projected, parallels can be drawn between quaternary numerals and the way genetic code is represented by DNA. The four DNA nucleotides in order, abbreviated A, C, G and T, can be taken to represent the quaternary digits in numerical order 0,1,2. With this encoding, the complementary digit pairs 0↔3, and 1↔2 match the complementation of the pairs, A↔T and C↔G. For example, the nucleotide sequence GATTACA can be represented by the quaternary number 2033010, quaternary line codes have been used for transmission, from the invention of the telegraph to the 2B1Q code used in modern ISDN circuits
10.
Quinary
–
Quinary is a numeral system with five as the base. A possible origination of a system is that there are five fingers on either hand. The base five is stated from 0–4, in the quinary place system, five numerals, from 0 to 4, are used to represent any real number. According to this method, five is written as 10, twenty-five is written as 100, today, the main usage of base 5 is as a biquinary system, which is decimal using five as a sub-base. Another example of a system, is sexagesimal, base 60. Each quinary digit has log25 bits of information, many languages use quinary number systems, including Gumatj, Nunggubuyu, Kuurn Kopan Noot, Luiseño and Saraveca. Gumatj is a true 5–25 language, in which 25 is the group of 5. The Gumatj numerals are shown below, In the video game Riven and subsequent games of the Myst franchise, a decimal system with 2 and 5 as a sub-bases is called biquinary, and is found in Wolof and Khmer. Roman numerals are a biquinary system, the numbers 1,5,10, and 50 are written as I, V, X, and L respectively. Eight is VIII and seventy is LXX, most versions of the abacus use a biquinary system to simulate a decimal system for ease of calculation. Urnfield culture numerals and some tally mark systems are also biquinary, units of currencies are commonly partially or wholly biquinary. A vigesimal system with 4 and 5 as a sub-bases is found in Nahuatl, pentimal system Quibinary Yan Tan Tethera References, Quinary Base Conversion, includes fractional part, from Math Is Fun Media related to Quinary numeral system at Wikimedia Commons
11.
Senary
–
The senary numeral system has six as its base. It has been adopted independently by a number of cultures. Like decimal, it is a semiprime, though being the product of the two consecutive numbers that are both prime it has a high degree of mathematical properties for its size. As six is a highly composite number, many of the arguments made in favor of the duodecimal system also apply to this base-6. Senary may be considered interesting in the study of numbers, since all primes other than 2 and 3. That is, for every number p greater than 3, one has the modular arithmetic relations that either p ≡1 or 5. This property maximizes the probability that the result of an integer multiplication will end in zero, E. g. if three fingers are extended on the left hand and four on the right, 34senary is represented. This is equivalent to 3 ×6 +4 which is 22decimal, flipping the sixes hand around to its backside may help to further disambiguate which hand represents the sixes and which represents the units. While most developed cultures count by fingers up to 5 in very similar ways, beyond 5 non-Western cultures deviate from Western methods, such as with Chinese number gestures. More abstract finger counting systems, such as chisanbop or finger binary, allow counting to 99,1,023, or even higher depending on the method. The English monk and historian Bede, in the first chapter of De temporum ratione, titled Tractatus de computo, vel loquela per gestum digitorum, the Ndom language of Papua New Guinea is reported to have senary numerals. Mer means 6, mer an thef means 6 ×2 =12, nif means 36, another example from Papua New Guinea are the Morehead-Maro languages. In these languages, counting is connected to ritualized yam-counting and these languages count from a base six, employing words for the powers of six, running up to 66 for some of the languages. One example is Kómnzo with the numerals, nimbo, féta, tarumba, ntamno, wärämäkä. Some Niger-Congo languages have been reported to use a number system, usually in addition to another. For some purposes, base 6 might be too small a base for convenience. The choice of 36 as a radix is convenient in that the digits can be represented using the Arabic numerals 0–9 and the Latin letters A–Z, this choice is the basis of the base36 encoding scheme. Base36 encoding scheme Binary Ternary Duodecimal Sexagesimal Shacks Base Six Dialectic Digital base 6 clock Analog Clock Designer capable of rendering a base 6 clock Senary base conversion
12.
Octal
–
The octal numeral system, or oct for short, is the base-8 number system, and uses the digits 0 to 7. Octal numerals can be made from binary numerals by grouping binary digits into groups of three. For example, the representation for decimal 74 is 1001010. Two zeroes can be added at the left,1001010, corresponding the octal digits 112, in the decimal system each decimal place is a power of ten. For example,7410 =7 ×101 +4 ×100 In the octal system each place is a power of eight. The Yuki language in California and the Pamean languages in Mexico have octal systems because the speakers count using the spaces between their fingers rather than the fingers themselves and it has been suggested that the reconstructed Proto-Indo-European word for nine might be related to the PIE word for new. Based on this, some have speculated that proto-Indo-Europeans used a number system. In 1716 King Charles XII of Sweden asked Emanuel Swedenborg to elaborate a number based on 64 instead of 10. Swedenborg however argued that for people with less intelligence than the king such a big base would be too difficult, in 1718 Swedenborg wrote a manuscript, En ny rekenkonst som om vexlas wid Thalet 8 i stelle then wanliga wid Thalet 10. The numbers 1-7 are there denoted by the l, s, n, m, t, f, u. Thus 8 = lo,16 = so,24 = no,64 = loo,512 = looo etc, numbers with consecutive consonants are pronounced with vowel sounds between in accordance with a special rule. Writing under the pseudonym Hirossa Ap-Iccim in The Gentlemans Magazine, July 1745, Hugh Jones proposed a system for British coins, weights. In 1801, James Anderson criticized the French for basing the Metric system on decimal arithmetic and he suggested base 8 for which he coined the term octal. In the mid 19th century, Alfred B. Taylor concluded that Our octonary radix is, therefore, so, for example, the number 65 would be spoken in octonary as under-un. Taylor also republished some of Swedenborgs work on octonary as an appendix to the above-cited publications, in the 2009 film Avatar, the language of the extraterrestrial Navi race employs an octal numeral system, probably due to the fact that they have four fingers on each hand. In the TV series Stargate SG-1, the Ancients, a race of beings responsible for the invention of the Stargates, in the tabletop game series Warhammer 40,000, the Tau race use an octal number system. Octal became widely used in computing systems such as the PDP-8, ICL1900. Octal was an abbreviation of binary for these machines because their word size is divisible by three
13.
Duodecimal
–
The duodecimal system is a positional notation numeral system using twelve as its base. In this system, the number ten may be written by a rotated 2 and this notation was introduced by Sir Isaac Pitman. These digit forms are available as Unicode characters on computerized systems since June 2015 as ↊ and ↋, other notations use A, T, or X for ten and B or E for eleven. The number twelve is written as 10 in duodecimal, whereas the digit string 12 means 1 dozen and 2 units. Similarly, in duodecimal 100 means 1 gross,1000 means 1 great gross, the number twelve, a superior highly composite number, is the smallest number with four non-trivial factors, and the smallest to include as factors all four numbers within the subitizing range. As a result, duodecimal has been described as the number system. Of its factors,2 and 3 are prime, which means the reciprocals of all 3-smooth numbers have a representation in duodecimal. In particular, the five most elementary fractions all have a terminating representation in duodecimal. This all makes it a convenient number system for computing fractions than most other number systems in common use, such as the decimal, vigesimal, binary. Although the trigesimal and sexagesimal systems do even better in respect, this is at the cost of unwieldy multiplication tables. In this section, numerals are based on decimal places, for example,10 means ten,12 means twelve. Languages using duodecimal number systems are uncommon, germanic languages have special words for 11 and 12, such as eleven and twelve in English. However, they are considered to come from Proto-Germanic *ainlif and *twalif, historically, units of time in many civilizations are duodecimal. There are twelve signs of the zodiac, twelve months in a year, traditional Chinese calendars, clocks, and compasses are based on the twelve Earthly Branches. There are 12 inches in a foot,12 troy ounces in a troy pound,12 old British pence in a shilling,24 hours in a day. The Romans used a system based on 12, including the uncia which became both the English words ounce and inch. The importance of 12 has been attributed to the number of cycles in a year. It is possible to count to 12 with the acting as a pointer
14.
Hexadecimal
–
In mathematics and computing, hexadecimal is a positional numeral system with a radix, or base, of 16. It uses sixteen distinct symbols, most often the symbols 0–9 to represent values zero to nine, Hexadecimal numerals are widely used by computer system designers and programmers. As each hexadecimal digit represents four binary digits, it allows a more human-friendly representation of binary-coded values, one hexadecimal digit represents a nibble, which is half of an octet or byte. For example, a byte can have values ranging from 00000000 to 11111111 in binary form. In a non-programming context, a subscript is typically used to give the radix, several notations are used to support hexadecimal representation of constants in programming languages, usually involving a prefix or suffix. The prefix 0x is used in C and related languages, where this value might be denoted as 0x2AF3, in contexts where the base is not clear, hexadecimal numbers can be ambiguous and confused with numbers expressed in other bases. There are several conventions for expressing values unambiguously, a numerical subscript can give the base explicitly,15910 is decimal 159,15916 is hexadecimal 159, which is equal to 34510. Some authors prefer a text subscript, such as 159decimal and 159hex, or 159d and 159h. example. com/name%20with%20spaces where %20 is the space character, thus ’, represents the right single quotation mark, Unicode code point number 2019 in hex,8217. In the Unicode standard, a value is represented with U+ followed by the hex value. Color references in HTML, CSS and X Window can be expressed with six hexadecimal digits prefixed with #, white, CSS allows 3-hexdigit abbreviations with one hexdigit per component, #FA3 abbreviates #FFAA33. *nix shells, AT&T assembly language and likewise the C programming language, to output an integer as hexadecimal with the printf function family, the format conversion code %X or %x is used. In Intel-derived assembly languages and Modula-2, hexadecimal is denoted with a suffixed H or h, some assembly languages use the notation HABCD. Ada and VHDL enclose hexadecimal numerals in based numeric quotes, 16#5A3#, for bit vector constants VHDL uses the notation x5A3. Verilog represents hexadecimal constants in the form 8hFF, where 8 is the number of bits in the value, the Smalltalk language uses the prefix 16r, 16r5A3 PostScript and the Bourne shell and its derivatives denote hex with prefix 16#, 16#5A3. For PostScript, binary data can be expressed as unprefixed consecutive hexadecimal pairs, in early systems when a Macintosh crashed, one or two lines of hexadecimal code would be displayed under the Sad Mac to tell the user what went wrong. Common Lisp uses the prefixes #x and #16r, setting the variables *read-base* and *print-base* to 16 can also used to switch the reader and printer of a Common Lisp system to Hexadecimal number representation for reading and printing numbers. Thus Hexadecimal numbers can be represented without the #x or #16r prefix code, MSX BASIC, QuickBASIC, FreeBASIC and Visual Basic prefix hexadecimal numbers with &H, &H5A3 BBC BASIC and Locomotive BASIC use & for hex. TI-89 and 92 series uses a 0h prefix, 0h5A3 ALGOL68 uses the prefix 16r to denote hexadecimal numbers, binary, quaternary and octal numbers can be specified similarly
15.
Vigesimal
–
The vigesimal or base 20 numeral system is based on twenty. In a vigesimal system, twenty individual numerals are used. One modern method of finding the extra needed symbols is to write ten as the letter A20, to write nineteen as J20, and this is similar to the common computer-science practice of writing hexadecimal numerals over 9 with the letters A–F. Another method skips over the letter I, in order to avoid confusion between I20 as eighteen and one, so that the number eighteen is written as J20, the number twenty is written as 1020. According to this notation,2020 means forty in decimal = + D020 means two hundred and sixty in decimal = +10020 means four hundred in decimal = + +, in the rest of this article below, numbers are expressed in decimal notation, unless specified otherwise. For example,10 means ten,20 means twenty, in decimal, dividing by three twice only gives one digit periods because 9 is the number below ten. 21, however, the adjacent to 20 that is divisible by 3, is not divisible by 9. Ninths in vigesimal have six-digit periods, the prime factorization of twenty is 22 ×5, so it is not a perfect power. However, its part,5, is congruent to 1. Thus, according to Artins conjecture on primitive roots, vigesimal has infinitely many cyclic primes, but the fraction of primes that are cyclic is not necessarily ~37. 395%. An UnrealScript program that computes the lengths of recurring periods of various fractions in a set of bases found that, of the first 15,456 primes. In many European languages,20 is used as a base, vigesimal systems are common in Africa, for example in Yoruba. Ogún,20, is the basic numeric block, ogójì,40, =20 multiplied by 2. Ogota,60, =20 multiplied by 3, ogorin,80, =20 multiplied by 4. Ogorun,100, =20 multiplied by 5, twenty was a base in the Maya and Aztec number systems. The Maya used the names for the powers of twenty, kal, bak, pic, calab, kinchil. See also Maya numerals and Maya calendar, Mayan languages, Yucatec, the Aztec called them, cempoalli, centzontli, cenxiquipilli, cempoalxiquipilli, centzonxiquipilli and cempoaltzonxiquipilli. Note that the ce prefix at the beginning means one and is replaced with the number to get the names of other multiples of the power
16.
Base 36
–
The senary numeral system has six as its base. It has been adopted independently by a number of cultures. Like decimal, it is a semiprime, though being the product of the two consecutive numbers that are both prime it has a high degree of mathematical properties for its size. As six is a highly composite number, many of the arguments made in favor of the duodecimal system also apply to this base-6. Senary may be considered interesting in the study of numbers, since all primes other than 2 and 3. That is, for every number p greater than 3, one has the modular arithmetic relations that either p ≡1 or 5. This property maximizes the probability that the result of an integer multiplication will end in zero, E. g. if three fingers are extended on the left hand and four on the right, 34senary is represented. This is equivalent to 3 ×6 +4 which is 22decimal, flipping the sixes hand around to its backside may help to further disambiguate which hand represents the sixes and which represents the units. While most developed cultures count by fingers up to 5 in very similar ways, beyond 5 non-Western cultures deviate from Western methods, such as with Chinese number gestures. More abstract finger counting systems, such as chisanbop or finger binary, allow counting to 99,1,023, or even higher depending on the method. The English monk and historian Bede, in the first chapter of De temporum ratione, titled Tractatus de computo, vel loquela per gestum digitorum, the Ndom language of Papua New Guinea is reported to have senary numerals. Mer means 6, mer an thef means 6 ×2 =12, nif means 36, another example from Papua New Guinea are the Morehead-Maro languages. In these languages, counting is connected to ritualized yam-counting and these languages count from a base six, employing words for the powers of six, running up to 66 for some of the languages. One example is Kómnzo with the numerals, nimbo, féta, tarumba, ntamno, wärämäkä. Some Niger-Congo languages have been reported to use a number system, usually in addition to another. For some purposes, base 6 might be too small a base for convenience. The choice of 36 as a radix is convenient in that the digits can be represented using the Arabic numerals 0–9 and the Latin letters A–Z, this choice is the basis of the base36 encoding scheme. Base36 encoding scheme Binary Ternary Duodecimal Sexagesimal Shacks Base Six Dialectic Digital base 6 clock Analog Clock Designer capable of rendering a base 6 clock Senary base conversion
17.
Natural number
–
In mathematics, the natural numbers are those used for counting and ordering. In common language, words used for counting are cardinal numbers, texts that exclude zero from the natural numbers sometimes refer to the natural numbers together with zero as the whole numbers, but in other writings, that term is used instead for the integers. These chains of extensions make the natural numbers canonically embedded in the number systems. Properties of the numbers, such as divisibility and the distribution of prime numbers, are studied in number theory. Problems concerning counting and ordering, such as partitioning and enumerations, are studied in combinatorics, the most primitive method of representing a natural number is to put down a mark for each object. Later, a set of objects could be tested for equality, excess or shortage, by striking out a mark, the first major advance in abstraction was the use of numerals to represent numbers. This allowed systems to be developed for recording large numbers, the ancient Egyptians developed a powerful system of numerals with distinct hieroglyphs for 1,10, and all the powers of 10 up to over 1 million. A stone carving from Karnak, dating from around 1500 BC and now at the Louvre in Paris, depicts 276 as 2 hundreds,7 tens, and 6 ones, and similarly for the number 4,622. A much later advance was the development of the idea that 0 can be considered as a number, with its own numeral. The use of a 0 digit in place-value notation dates back as early as 700 BC by the Babylonians, the Olmec and Maya civilizations used 0 as a separate number as early as the 1st century BC, but this usage did not spread beyond Mesoamerica. The use of a numeral 0 in modern times originated with the Indian mathematician Brahmagupta in 628, the first systematic study of numbers as abstractions is usually credited to the Greek philosophers Pythagoras and Archimedes. Some Greek mathematicians treated the number 1 differently than larger numbers, independent studies also occurred at around the same time in India, China, and Mesoamerica. In 19th century Europe, there was mathematical and philosophical discussion about the nature of the natural numbers. A school of Naturalism stated that the numbers were a direct consequence of the human psyche. Henri Poincaré was one of its advocates, as was Leopold Kronecker who summarized God made the integers, in opposition to the Naturalists, the constructivists saw a need to improve the logical rigor in the foundations of mathematics. In the 1860s, Hermann Grassmann suggested a recursive definition for natural numbers thus stating they were not really natural, later, two classes of such formal definitions were constructed, later, they were shown to be equivalent in most practical applications. The second class of definitions was introduced by Giuseppe Peano and is now called Peano arithmetic and it is based on an axiomatization of the properties of ordinal numbers, each natural number has a successor and every non-zero natural number has a unique predecessor. Peano arithmetic is equiconsistent with several systems of set theory
18.
Scientific notation
–
Scientific notation is a way of expressing numbers that are too big or too small to be conveniently written in decimal form. It is commonly used by scientists, mathematicians and engineers, in part because it can simplify certain arithmetic operations, on scientific calculators it is known as SCI display mode. In scientific notation all numbers are written in the form m × 10n, where the exponent n is an integer, however, the term mantissa may cause confusion because it is the name of the fractional part of the common logarithm. If the number is then a minus sign precedes m. In normalized notation, the exponent is chosen so that the value of the coefficient is at least one. Decimal floating point is an arithmetic system closely related to scientific notation. Any given integer can be written in the form m×10^n in many ways, in normalized scientific notation, the exponent n is chosen so that the absolute value of m remains at least one but less than ten. Thus 350 is written as 3. 5×102 and this form allows easy comparison of numbers, as the exponent n gives the numbers order of magnitude. In normalized notation, the exponent n is negative for a number with absolute value between 0 and 1, the 10 and exponent are often omitted when the exponent is 0. Normalized scientific form is the form of expression of large numbers in many fields, unless an unnormalized form. Normalized scientific notation is often called exponential notation—although the latter term is general and also applies when m is not restricted to the range 1 to 10. Engineering notation differs from normalized scientific notation in that the exponent n is restricted to multiples of 3, consequently, the absolute value of m is in the range 1 ≤ |m| <1000, rather than 1 ≤ |m| <10. Though similar in concept, engineering notation is rarely called scientific notation, engineering notation allows the numbers to explicitly match their corresponding SI prefixes, which facilitates reading and oral communication. A significant figure is a digit in a number that adds to its precision and this includes all nonzero numbers, zeroes between significant digits, and zeroes indicated to be significant. Leading and trailing zeroes are not significant because they exist only to show the scale of the number. Therefore,1,230,400 usually has five significant figures,1,2,3,0, and 4, when a number is converted into normalized scientific notation, it is scaled down to a number between 1 and 10. All of the significant digits remain, but the place holding zeroes are no longer required, thus 1,230,400 would become 1.2304 ×106. However, there is also the possibility that the number may be known to six or more significant figures, thus, an additional advantage of scientific notation is that the number of significant figures is clearer
19.
India
–
India, officially the Republic of India, is a country in South Asia. It is the seventh-largest country by area, the second-most populous country, and it is bounded by the Indian Ocean on the south, the Arabian Sea on the southwest, and the Bay of Bengal on the southeast. It shares land borders with Pakistan to the west, China, Nepal, and Bhutan to the northeast, in the Indian Ocean, India is in the vicinity of Sri Lanka and the Maldives. Indias Andaman and Nicobar Islands share a border with Thailand. The Indian subcontinent was home to the urban Indus Valley Civilisation of the 3rd millennium BCE, in the following millennium, the oldest scriptures associated with Hinduism began to be composed. Social stratification, based on caste, emerged in the first millennium BCE, early political consolidations took place under the Maurya and Gupta empires, the later peninsular Middle Kingdoms influenced cultures as far as southeast Asia. In the medieval era, Judaism, Zoroastrianism, Christianity, and Islam arrived, much of the north fell to the Delhi sultanate, the south was united under the Vijayanagara Empire. The economy expanded in the 17th century in the Mughal empire, in the mid-18th century, the subcontinent came under British East India Company rule, and in the mid-19th under British crown rule. A nationalist movement emerged in the late 19th century, which later, under Mahatma Gandhi, was noted for nonviolent resistance, in 2015, the Indian economy was the worlds seventh largest by nominal GDP and third largest by purchasing power parity. Following market-based economic reforms in 1991, India became one of the major economies and is considered a newly industrialised country. However, it continues to face the challenges of poverty, corruption, malnutrition, a nuclear weapons state and regional power, it has the third largest standing army in the world and ranks sixth in military expenditure among nations. India is a constitutional republic governed under a parliamentary system. It is a pluralistic, multilingual and multi-ethnic society and is home to a diversity of wildlife in a variety of protected habitats. The name India is derived from Indus, which originates from the Old Persian word Hindu, the latter term stems from the Sanskrit word Sindhu, which was the historical local appellation for the Indus River. The ancient Greeks referred to the Indians as Indoi, which translates as The people of the Indus, the geographical term Bharat, which is recognised by the Constitution of India as an official name for the country, is used by many Indian languages in its variations. Scholars believe it to be named after the Vedic tribe of Bharatas in the second millennium B. C. E and it is also traditionally associated with the rule of the legendary emperor Bharata. Gaṇarājya is the Sanskrit/Hindi term for republic dating back to the ancient times, hindustan is a Persian name for India dating back to the 3rd century B. C. E. It was introduced into India by the Mughals and widely used since then and its meaning varied, referring to a region that encompassed northern India and Pakistan or India in its entirety
20.
South Asia
–
Topographically, it is dominated by the Indian Plate, which rises above sea level as Nepal and northern parts of India situated south of the Himalayas and the Hindu Kush. South Asia is bounded on the south by the Indian Ocean and on land by West Asia, Central Asia, East Asia, the current territories of Afghanistan, Bangladesh, Bhutan, Maldives, Nepal, India, Pakistan, and Sri Lanka form the countries of South Asia. The South Asian Association for Regional Cooperation is an economic cooperation organisation in the region which was established in 1985, South Asia covers about 5.1 million km², which is 11. 51% of the Asian continent or 3. 4% of the worlds land surface area. The population of South Asia is about 1.749 billion or about one fourth of the worlds population, overall, it accounts for about 39. 49% of Asias population and is home to a vast array of peoples. The area of South Asia and its extent is not clear cut as systemic. Aside from the region of South Asia, formerly part of the British Empire, there is a high degree of variation as to which other countries are included in South Asia. Modern definitions of South Asia are consistent in including Afghanistan, India, Pakistan, Bangladesh, Sri Lanka, Nepal, Bhutan, Myanmar is included by some scholars in South Asia, but in Southeast Asia by others. Some do not include Afghanistan, others question whether Afghanistan should be considered a part of South Asia or the Middle East, the mountain countries of Nepal and Bhutan, and the island countries of Sri Lanka and Maldives are generally included as well. Myanmar is often added, and by various deviating definitions based on often substantially different reasons, the British Indian Ocean Territory, the common concept of South Asia is largely inherited from the administrative boundaries of the British Raj, with several exceptions. The Aden Colony, British Somaliland and Singapore, though administered at various times under the Raj, have not been proposed as any part of South Asia. Additionally Burma was administered as part of the Raj until 1937, the 562 princely states that were protected by but not directly ruled by the Raj became administrative parts of South Asia upon joining Union of India or Dominion of Pakistan. China and Myanmar have also applied for the status of members of SAARC. This bloc of countries include two independent countries that were not part of the British Raj – Nepal, and Bhutan, Afghanistan was a British protectorate from 1878 until 1919, after the Afghans lost to the British in the Second Anglo-Afghan war. The United Nations Statistics Divisions scheme of sub-regions include all eight members of the SAARC as part of Southern Asia, population Information Network includes Afghanistan, Bangladesh, Burma, India, Nepal, Pakistan and Sri Lanka as part of South Asia. Maldives, in view of its characteristics, was admitted as a member Pacific POPIN subregional network only in principle, the Hirschman–Herfindahl index of the United Nations Economic and Social Commission for Asia and the Pacific for the region includes only the original seven signatories of SAARC. The British Indian Ocean Territory is connected to the region by a publication of Janes for security considerations, the inclusion of Myanmar in South Asia is without consensus, with many considering it a part of southeast Asia and others including it within South Asia. Afghanistan was of importance to the British colonial empire, especially after the Second Anglo-Afghan War over 1878–1880, Afghanistan remained a British protectorate until 1919, when a treaty with Vladimir Lenin included the granting of independence to Afghanistan. Following Indias partition, Afghanistan has generally included in South Asia
21.
Thai language
–
Thai, also known as Siamese or Central Thai, is the national and official language of Thailand and the native language of the Thai people and the vast majority of Thai Chinese. Thai is a member of the Tai group of the Tai–Kadai language family, over half of the words in Thai are borrowed from Pali, Sanskrit and Old Khmer. It is a tonal and analytic language, Thai also has a complex orthography and relational markers. Spoken Thai is mutually intelligible with Laotian, Thai is the official language of Thailand, natively spoken by over 20 million people. Standard Thai is based on the register of the classes of Bangkok. In addition to Central Thai, Thailand is home to other related Tai languages, Isan, the language of the Isan region of Thailand, a collective term for the various Lao dialects spoken in Thailand that show some Siamese Thai influences, which is written with the Thai script. It is spoken by about 20 million people, Thais from both inside and outside the Isan region often simply call this variant Lao when speaking informally. Northern Thai, spoken by about 6 million in the independent kingdom of Lanna. Shares strong similarities with Lao to the point that in the past the Siamese Thais referred to it as Lao. Southern Thai, spoken by about 4.5 million Phu Thai, spoken by half a million around Nakhon Phanom Province. Phuan, spoken by 200,000 in central Thailand and Isan, Shan, spoken by about 100,000 in north-west Thailand along the border with the Shan States of Burma, and by 3.2 million in Burma. Lü, spoken by about 1,000,000 in northern Thailand, and 600,000 more in Sipsong Panna, Burma, nyaw language, spoken by 50,000 in Nakhon Phanom Province, Sakhon Nakhon Province, Udon Thani Province of Northeast Thailand. Song, spoken by about 30,000 in central and northern Thailand, Elegant or Formal Thai, official and written version, includes respectful terms of address, used in simplified form in newspapers. Rhetorical Thai, used for public speaking, religious Thai, used when discussing Buddhism or addressing monks. Royal Thai, influenced by Khmer, this is used when addressing members of the family or describing their activities. Most Thais can speak and understand all of these contexts, street and Elegant Thai are the basis of all conversations. Rhetorical, religious, and royal Thai are taught in schools as the national curriculum, many scholars believe that the Thai script is derived from the Khmer script, which is modeled after the Brahmic script from the Indic family. However, in appearance, Thai is closer to Thai Dam script, the language and its script are closely related to the Lao language and script
22.
Lao language
–
Lao, also referred to as Laotian, Thai Noi, is a tonal language of the Tai–Kadai language family. It is the language of Laos, and also spoken in the northeast of Thailand. The Lao language serves as an important lingua franca as the country of Laos consists of ethnic groups. Spoken Lao is mutually intelligible with the Thai language, Lao, like many languages in Laos, is written in the Lao script, an abugida. Although there is no standard, the Vientiane dialect has become the de facto standard. Oral history of the migrations is preserved in the legends of Khun Borom, Tai speakers in what is now Laos pushed out or absorbed earlier groups of Mon–Khmer and Austronesian languages. These Tai peoples are classified by the Lao government as Lao Loum or lowland Lao, Lao and Thai are also very similar and share most of their basic vocabulary, but differences in many basic words limit inter-comprehension. The Lao language consists primarily of native Lao words, because of Buddhism, however, Pali has contributed numerous terms, especially relating to religion and in conversation with members of the Sangha. Due to their proximity, Lao has influenced the Khmer and Thai languages. Formal writing has an amount of foreign loanwords, especially Pali and Sanskrit terms, much as Latin. For politeness, pronouns are used, plus ending statements with ແດ່ or ເດີ້, negative statements are made more polite by ending with ດອກ. The following are formal register examples, many consonants in Lao make a phonemic contrast between labialized and plain versions. The complete inventory of Lao consonants is as shown in the table below, hence, final /p/, /t/, and /k/ sounds are pronounced as, and respectively. * The glottal stop appears at the end when no final follows a short vowel, All vowels make a phonemic length distinction. The vowels are as shown in the table, Diphthongs are all centering diphthongs with falling sonority. There are six tones in unchecked syllables, that is. The number of tones is reduced to four in checked syllables. The only consonant clusters allowed are syllable initial clusters /kw/ or /kʰw/, any consonant may appear in the onset, but the labialized consonants do not occur before rounded vowels
23.
Khmer language
–
Khmer /kmɛər/ or Cambodian is the language of the Khmer people and the official language of Cambodia. With approximately 16 million speakers, it is the second most widely spoken Austroasiatic language, Khmer has been influenced considerably by Sanskrit and Pali, especially in the royal and religious registers, through Hinduism and Buddhism. The vast majority of Khmer speakers speak Central Khmer, the dialect of the plain where the Khmer are most heavily concentrated. Within Cambodia, regional accents exist in remote areas but these are regarded as varieties of Central Khmer, outside of Cambodia, three distinct dialects are spoken by ethnic Khmers native to areas that were historically part of the Khmer Empire. The Northern Khmer dialect is spoken by over a million Khmers in the regions of Northeast Thailand and is treated by some linguists as a separate language. Khmer is primarily an analytic, isolating language, there are no inflections, conjugations or case endings. Instead, particles and auxiliary words are used to indicate grammatical relationships, general word order is subject–verb–object, and modifiers follow the word they modify. Classifiers appear after numbers when used to count nouns, though not always so consistently as in languages like Chinese, in spoken Khmer, topic-comment structure is common and the perceived social relation between participants determines which sets of vocabulary, such as pronouns and honorifics, are proper. Khmer differs from neighboring languages such as Thai, Burmese, Lao, words are stressed on the final syllable, hence many words conform to the typical Mon–Khmer pattern of a stressed syllable preceded by a minor syllable. The language has been written in the Khmer script, an abugida descended from the Brahmi script via the southern Indian Pallava script, approximately 79% of Cambodians are able to read Khmer. Khmer is a member of the Austroasiatic language family, the family in an area that stretches from the Malay Peninsula through Southeast Asia to East India. Austroasiatic, which also includes Mon, Vietnamese and Munda, has been studied since 1856 and was first proposed as a family in 1907. Despite the amount of research, there is doubt about the internal relationship of the languages of Austroasiatic. Diffloth places Khmer in a branch of the Mon-Khmer languages. In these classification schemes Khmers closest genetic relatives are the Bahnaric and Pearic languages, more recent classifications doubt the validity of the Mon-Khmer sub-grouping and place the Khmer language as its own branch of Austroasiatic equidistant from the other 12 branches of the family. Khmer is spoken by some 13 million people in Cambodia, where it is the official language and it is also a second language for most of the minority groups and indigenous hill tribes there. Additionally there are a million speakers of Khmer native to southern Vietnam and 1.4 million in northeast Thailand, Khmer dialects, although mutually intelligible, are sometimes quite marked. The dialects form a continuum running roughly north to south, the following is a classification scheme showing the development of the modern Khmer dialects
24.
Vietnamese language
–
Vietnamese /ˌviɛtnəˈmiːz/ is an Austroasiatic language that originated in the north of modern-day Vietnam, where it is the national and official language. It is the language of the Vietnamese people, as well as a first or second language for the many ethnic minorities of Vietnam. As the result of Vietnamese emigration and cultural influence, Vietnamese speakers are found throughout the world, notably in East and Southeast Asia, North America, Australia, Vietnamese has also been officially recognized as a minority language in the Czech Republic. It is part of the Austroasiatic language family of which it has by far the most speakers, Vietnamese vocabulary has borrowings from Chinese, and it formerly used a modified set of Chinese characters called chữ nôm given vernacular pronunciation. The Vietnamese alphabet in use today is a Latin alphabet with diacritics for tones. As the national language, Vietnamese is spoken throughout Vietnam by ethnic Vietnamese, Vietnamese is also the native language of the Gin minority group in southern Guangxi Province in China. A significant number of speakers also reside in neighboring Cambodia. In the United States, Vietnamese is the sixth most spoken language, with over 1.5 million speakers and it is the third most spoken language in Texas, fourth in Arkansas and Louisiana, and fifth in California. Vietnamese is the seventh most spoken language in Australia, in France, it is the most spoken Asian language and the eighth most spoken immigrant language at home. Vietnamese is the official and national language of Vietnam. It is the first language of the majority of the Vietnamese population, in the Czech Republic, Vietnamese has been recognized as one of 14 minority languages, on the basis of communities that have either traditionally or on a long-term basis resided in the country. This status grants Czech citizens from the Vietnamese community the right to use Vietnamese with public authorities, Vietnamese is increasingly being taught in schools and institutions outside of Vietnam. Since the 1980s, Vietnamese language schools have been established for youth in many Vietnamese-speaking communities around the world, furthermore, there has also been a number of Germans studying Vietnamese due to increased economic investment in Vietnam. Vietnamese is taught in schools in the form of immersion to a varying degree in Cambodia, Laos. Classes teach students subjects in Vietnamese and another language, furthermore, in Thailand, Vietnamese is one of the most popular foreign languages in schools and colleges. Vietnamese was identified more than 150 years ago as part of the Mon–Khmer branch of the Austroasiatic language family. Later, Muong was found to be closely related to Vietnamese than other Mon–Khmer languages. The term Vietic was proposed by Hayes, who proposed to redefine Viet–Muong as referring to a subbranch of Vietic containing only Vietnamese and Muong
25.
Astronomy
–
Astronomy is a natural science that studies celestial objects and phenomena. It applies mathematics, physics, and chemistry, in an effort to explain the origin of those objects and phenomena and their evolution. Objects of interest include planets, moons, stars, galaxies, and comets, while the phenomena include supernovae explosions, gamma ray bursts, more generally, all astronomical phenomena that originate outside Earths atmosphere are within the purview of astronomy. A related but distinct subject, physical cosmology, is concerned with the study of the Universe as a whole, Astronomy is the oldest of the natural sciences. The early civilizations in recorded history, such as the Babylonians, Greeks, Indians, Egyptians, Nubians, Iranians, Chinese, during the 20th century, the field of professional astronomy split into observational and theoretical branches. Observational astronomy is focused on acquiring data from observations of astronomical objects, theoretical astronomy is oriented toward the development of computer or analytical models to describe astronomical objects and phenomena. The two fields complement each other, with theoretical astronomy seeking to explain the results and observations being used to confirm theoretical results. Astronomy is one of the few sciences where amateurs can play an active role, especially in the discovery. Amateur astronomers have made and contributed to many important astronomical discoveries, Astronomy means law of the stars. Astronomy should not be confused with astrology, the system which claims that human affairs are correlated with the positions of celestial objects. Although the two share a common origin, they are now entirely distinct. Generally, either the term astronomy or astrophysics may be used to refer to this subject, however, since most modern astronomical research deals with subjects related to physics, modern astronomy could actually be called astrophysics. Few fields, such as astrometry, are purely astronomy rather than also astrophysics, some titles of the leading scientific journals in this field includeThe Astronomical Journal, The Astrophysical Journal and Astronomy and Astrophysics. In early times, astronomy only comprised the observation and predictions of the motions of objects visible to the naked eye, in some locations, early cultures assembled massive artifacts that possibly had some astronomical purpose. Before tools such as the telescope were invented, early study of the stars was conducted using the naked eye, most of early astronomy actually consisted of mapping the positions of the stars and planets, a science now referred to as astrometry. From these observations, early ideas about the motions of the planets were formed, and the nature of the Sun, Moon, the Earth was believed to be the center of the Universe with the Sun, the Moon and the stars rotating around it. This is known as the model of the Universe, or the Ptolemaic system. The Babylonians discovered that lunar eclipses recurred in a cycle known as a saros
26.
Altitude
–
Altitude or height is defined based on the context in which it is used. As a general definition, altitude is a measurement, usually in the vertical or up direction. The reference datum also often varies according to the context, although the term altitude is commonly used to mean the height above sea level of a location, in geography the term elevation is often preferred for this usage. Vertical distance measurements in the direction are commonly referred to as depth. In aviation, the altitude can have several meanings, and is always qualified by explicitly adding a modifier. Parties exchanging altitude information must be clear which definition is being used, aviation altitude is measured using either mean sea level or local ground level as the reference datum. When flying at a level, the altimeter is always set to standard pressure. On the flight deck, the instrument for measuring altitude is the pressure altimeter. There are several types of altitude, Indicated altitude is the reading on the altimeter when it is set to the local barometric pressure at mean sea level. In UK aviation radiotelephony usage, the distance of a level, a point or an object considered as a point, measured from mean sea level. Absolute altitude is the height of the aircraft above the terrain over which it is flying and it can be measured using a radar altimeter. Also referred to as radar height or feet/metres above ground level, true altitude is the actual elevation above mean sea level. It is indicated altitude corrected for temperature and pressure. Height is the elevation above a reference point, commonly the terrain elevation. Pressure altitude is used to indicate flight level which is the standard for reporting in the U. S. in Class A airspace. Pressure altitude and indicated altitude are the same when the setting is 29.92 Hg or 1013.25 millibars. Density altitude is the altitude corrected for non-ISA International Standard Atmosphere atmospheric conditions, aircraft performance depends on density altitude, which is affected by barometric pressure, humidity and temperature. On a very hot day, density altitude at an airport may be so high as to preclude takeoff and these types of altitude can be explained more simply as various ways of measuring the altitude, Indicated altitude – the altitude shown on the altimeter
27.
Spaceflight
–
Spaceflight is ballistic flight into or through outer space. Spaceflight can occur with spacecraft with or without humans on board, examples of human spaceflight include the U. S. Apollo Moon landing and Space Shuttle programs and the Russian Soyuz program, as well as the ongoing International Space Station. Examples of unmanned spaceflight include space probes that leave Earth orbit, as well as satellites in orbit around Earth and these operate either by telerobotic control or are fully autonomous. Spaceflight is used in exploration, and also in commercial activities like space tourism. Additional non-commercial uses of spaceflight include space observatories, reconnaissance satellites, a spaceflight typically begins with a rocket launch, which provides the initial thrust to overcome the force of gravity and propels the spacecraft from the surface of the Earth. Once in space, the motion of a spacecraft—both when unpropelled, some spacecraft remain in space indefinitely, some disintegrate during atmospheric reentry, and others reach a planetary or lunar surface for landing or impact. The first theoretical proposal of space using rockets was published by Scottish astronomer and mathematician William Leitch. More well-known is Konstantin Tsiolkovskys work, Исследование мировых пространств реактивными приборами, spaceflight became an engineering possibility with the work of Robert H. Goddards publication in 1919 of his paper A Method of Reaching Extreme Altitudes. His application of the de Laval nozzle to liquid fuel rockets improved efficiency enough for travel to become possible. He also proved in the laboratory that rockets would work in the vacuum of space, nonetheless and his attempt to secure an Army contract for a rocket-propelled weapon in the first World War was defeated by the November 11,1918 armistice with Germany. Nonetheless, Goddards paper was influential on Hermann Oberth, who in turn influenced Wernher von Braun. Von Braun became the first to produce modern rockets as guided weapons, von Brauns V-2 was the first rocket to reach space, at an altitude of 189 kilometers on a June 1944 test flight. At the end of World War II, von Braun and most of his rocket team surrendered to the United States, over the same period, the Soviet Union secretly tried but failed to develop the N1 rocket to give them the capability to land one person on the Moon. Rockets are the only means currently capable of reaching orbit or beyond, other non-rocket spacelaunch technologies have yet to be built, or remain short of orbital speeds. Spaceports are situated away from human habitation for noise and safety reasons. ICBMs have various special launching facilities, a launch is often restricted to certain launch windows. These windows depend upon the position of bodies and orbits relative to the launch site. The biggest influence is often the rotation of the Earth itself, once launched, orbits are normally located within relatively constant flat planes at a fixed angle to the axis of the Earth, and the Earth rotates within this orbit
28.
Irish language
–
Irish, also referred to as Gaelic or Irish Gaelic, is a Goidelic language of the Indo-European language family originating in Ireland and historically spoken by the Irish people. Irish is spoken as a first language by a minority of Irish people. Irish enjoys constitutional status as the national and first official language of the Republic of Ireland and it is also among the official languages of the European Union. The public body Foras na Gaeilge is responsible for the promotion of the language throughout the island of Ireland and it has the oldest vernacular literature in Western Europe. The fate of the language was influenced by the power of the English state in Ireland. Elizabethan officials viewed the use of Irish unfavourably, as being a threat to all things English in Ireland and its decline began under English rule in the 17th century. In the latter part of the 19th century, there was a decrease in the number of speakers. Irish-speaking areas were hit especially hard, by the end of British rule, the language was spoken by less than 15% of the national population. Since then, Irish speakers have been in the minority, efforts have been made by the state, individuals and organisations to preserve, promote and revive the language, but with mixed results. Around the turn of the 21st century, estimates of native speakers ranged from 20,000 to 80,000 people. In the 2011 Census, these numbers had increased to 94,000 and 1.3 million, there are several thousand Irish speakers in Northern Ireland. It has been estimated that the active Irish-language scene probably comprises 5 to 10 per cent of Irelands population, there has been a significant increase in the number of urban Irish speakers, particularly in Dublin. In Gaeltacht areas, however, there has been a decline of the use of Irish. Údarás na Gaeltachta predicted that, by 2025, Irish will no longer be the language in any of the designated Gaeltacht areas. Survey data suggest that most Irish people think highly of Irish as a marker of identity. It has also argued that newer urban groups of Irish speakers are a disruptive force in this respect. In An Caighdeán Oifigiúil the name of the language is Gaeilge, before the spelling reform of 1948, this form was spelled Gaedhilge, originally this was the genitive of Gaedhealg, the form used in Classical Irish. Older spellings of this include Gaoidhealg in Classical Irish and Goídelc in Old Irish, the modern spelling results from the deletion of the silent dh in the middle of Gaedhilge, whereas Goidelic languages, used to refer to the language family including Irish, comes from Old Irish
29.
Prime number
–
A prime number is a natural number greater than 1 that has no positive divisors other than 1 and itself. A natural number greater than 1 that is not a number is called a composite number. For example,5 is prime because 1 and 5 are its only positive integer factors, the property of being prime is called primality. A simple but slow method of verifying the primality of a number n is known as trial division. It consists of testing whether n is a multiple of any integer between 2 and n, algorithms much more efficient than trial division have been devised to test the primality of large numbers. Particularly fast methods are available for numbers of forms, such as Mersenne numbers. As of January 2016, the largest known prime number has 22,338,618 decimal digits, there are infinitely many primes, as demonstrated by Euclid around 300 BC. There is no simple formula that separates prime numbers from composite numbers. However, the distribution of primes, that is to say, many questions regarding prime numbers remain open, such as Goldbachs conjecture, and the twin prime conjecture. Such questions spurred the development of branches of number theory. Prime numbers give rise to various generalizations in other domains, mainly algebra, such as prime elements. A natural number is called a number if it has exactly two positive divisors,1 and the number itself. Natural numbers greater than 1 that are not prime are called composite, among the numbers 1 to 6, the numbers 2,3, and 5 are the prime numbers, while 1,4, and 6 are not prime. 1 is excluded as a number, for reasons explained below. 2 is a number, since the only natural numbers dividing it are 1 and 2. Next,3 is prime, too,1 and 3 do divide 3 without remainder, however,4 is composite, since 2 is another number dividing 4 without remainder,4 =2 ·2. 5 is again prime, none of the numbers 2,3, next,6 is divisible by 2 or 3, since 6 =2 ·3. The image at the right illustrates that 12 is not prime,12 =3 ·4, no even number greater than 2 is prime because by definition, any such number n has at least three distinct divisors, namely 1,2, and n