1.
Apsis
–
An apsis is an extreme point in an objects orbit. The word comes via Latin from Greek and is cognate with apse, for elliptic orbits about a larger body, there are two apsides, named with the prefixes peri- and ap-, or apo- added to a reference to the thing being orbited. For a body orbiting the Sun, the point of least distance is the perihelion, the terms become periastron and apastron when discussing orbits around other stars. For any satellite of Earth including the Moon the point of least distance is the perigee, for objects in Lunar orbit, the point of least distance is the pericynthion and the greatest distance the apocynthion. For any orbits around a center of mass, there are the terms pericenter and apocenter, periapsis and apoapsis are equivalent alternatives. A straight line connecting the pericenter and apocenter is the line of apsides and this is the major axis of the ellipse, its greatest diameter. For a two-body system the center of mass of the lies on this line at one of the two foci of the ellipse. When one body is larger than the other it may be taken to be at this focus. Historically, in systems, apsides were measured from the center of the Earth. In orbital mechanics, the apsis technically refers to the distance measured between the centers of mass of the central and orbiting body. However, in the case of spacecraft, the family of terms are used to refer to the orbital altitude of the spacecraft from the surface of the central body. The arithmetic mean of the two limiting distances is the length of the axis a. The geometric mean of the two distances is the length of the semi-minor axis b, the geometric mean of the two limiting speeds is −2 ε = μ a which is the speed of a body in a circular orbit whose radius is a. The words pericenter and apocenter are often seen, although periapsis/apoapsis are preferred in technical usage, various related terms are used for other celestial objects. The -gee, -helion and -astron and -galacticon forms are used in the astronomical literature when referring to the Earth, Sun, stars. The suffix -jove is occasionally used for Jupiter, while -saturnium has very rarely used in the last 50 years for Saturn. The -gee form is used as a generic closest approach to planet term instead of specifically applying to the Earth. During the Apollo program, the terms pericynthion and apocynthion were used when referring to the Moon, regarding black holes, the term peri/apomelasma was used by physicist Geoffrey A. Landis in 1998 before peri/aponigricon appeared in the scientific literature in 2002

2.
Semi-major and semi-minor axes
–
In geometry, the major axis of an ellipse is its longest diameter, a line segment that runs through the center and both foci, with ends at the widest points of the perimeter. The semi-major axis is one half of the axis, and thus runs from the centre, through a focus. Essentially, it is the radius of an orbit at the two most distant points. For the special case of a circle, the axis is the radius. One can think of the axis as an ellipses long radius. The semi-major axis of a hyperbola is, depending on the convention, thus it is the distance from the center to either vertex of the hyperbola. A parabola can be obtained as the limit of a sequence of ellipses where one focus is fixed as the other is allowed to move arbitrarily far away in one direction. Thus a and b tend to infinity, a faster than b, the semi-minor axis is a line segment associated with most conic sections that is at right angles with the semi-major axis and has one end at the center of the conic section. It is one of the axes of symmetry for the curve, in an ellipse, the one, in a hyperbola. The semi-major axis is the value of the maximum and minimum distances r max and r min of the ellipse from a focus — that is. In astronomy these extreme points are called apsis, the semi-minor axis of an ellipse is the geometric mean of these distances, b = r max r min. The eccentricity of an ellipse is defined as e =1 − b 2 a 2 so r min = a, r max = a. Now consider the equation in polar coordinates, with one focus at the origin, the mean value of r = ℓ / and r = ℓ /, for θ = π and θ =0 is a = ℓ1 − e 2. In an ellipse, the axis is the geometric mean of the distance from the center to either focus. The semi-minor axis of an ellipse runs from the center of the ellipse to the edge of the ellipse, the semi-minor axis is half of the minor axis. The minor axis is the longest line segment perpendicular to the axis that connects two points on the ellipses edge. The semi-minor axis b is related to the axis a through the eccentricity e. A parabola can be obtained as the limit of a sequence of ellipses where one focus is fixed as the other is allowed to move arbitrarily far away in one direction

3.
Orbital eccentricity
–
The orbital eccentricity of an astronomical object is a parameter that determines the amount by which its orbit around another body deviates from a perfect circle. A value of 0 is an orbit, values between 0 and 1 form an elliptical orbit,1 is a parabolic escape orbit. The term derives its name from the parameters of conic sections and it is normally used for the isolated two-body problem, but extensions exist for objects following a rosette orbit through the galaxy. In a two-body problem with inverse-square-law force, every orbit is a Kepler orbit, the eccentricity of this Kepler orbit is a non-negative number that defines its shape. The limit case between an ellipse and a hyperbola, when e equals 1, is parabola, radial trajectories are classified as elliptic, parabolic, or hyperbolic based on the energy of the orbit, not the eccentricity. Radial orbits have zero angular momentum and hence eccentricity equal to one, keeping the energy constant and reducing the angular momentum, elliptic, parabolic, and hyperbolic orbits each tend to the corresponding type of radial trajectory while e tends to 1. For a repulsive force only the trajectory, including the radial version, is applicable. For elliptical orbits, a simple proof shows that arcsin yields the projection angle of a circle to an ellipse of eccentricity e. For example, to view the eccentricity of the planet Mercury, next, tilt any circular object by that angle and the apparent ellipse projected to your eye will be of that same eccentricity. From Medieval Latin eccentricus, derived from Greek ἔκκεντρος ekkentros out of the center, from ἐκ- ek-, eccentric first appeared in English in 1551, with the definition a circle in which the earth, sun. Five years later, in 1556, a form of the word was added. The eccentricity of an orbit can be calculated from the state vectors as the magnitude of the eccentricity vector, e = | e | where. For elliptical orbits it can also be calculated from the periapsis and apoapsis since rp = a and ra = a, where a is the semimajor axis. E = r a − r p r a + r p =1 −2 r a r p +1 where, rp is the radius at periapsis. For Earths annual orbit path, ra/rp ratio = longest_radius / shortest_radius ≈1.034 relative to center point of path, the eccentricity of the Earths orbit is currently about 0.0167, the Earths orbit is nearly circular. Venus and Neptune have even lower eccentricity, over hundreds of thousands of years, the eccentricity of the Earths orbit varies from nearly 0.0034 to almost 0.058 as a result of gravitational attractions among the planets. The table lists the values for all planets and dwarf planets, Mercury has the greatest orbital eccentricity of any planet in the Solar System. Such eccentricity is sufficient for Mercury to receive twice as much solar irradiation at perihelion compared to aphelion, before its demotion from planet status in 2006, Pluto was considered to be the planet with the most eccentric orbit

4.
Orbital inclination
–
Orbital inclination measures the tilt of an objects orbit around a celestial body. It is expressed as the angle between a plane and the orbital plane or axis of direction of the orbiting object. For a satellite orbiting the Earth directly above the equator, the plane of the orbit is the same as the Earths equatorial plane. The general case is that the orbit is tilted, it spends half an orbit over the northern hemisphere. If the orbit swung between 20° north latitude and 20° south latitude, then its orbital inclination would be 20°, the inclination is one of the six orbital elements describing the shape and orientation of a celestial orbit. It is the angle between the plane and the plane of reference, normally stated in degrees. For a satellite orbiting a planet, the plane of reference is usually the plane containing the planets equator, for planets in the Solar System, the plane of reference is usually the ecliptic, the plane in which the Earth orbits the Sun. This reference plane is most practical for Earth-based observers, therefore, Earths inclination is, by definition, zero. Inclination could instead be measured with respect to another plane, such as the Suns equator or the invariable plane, the inclination of orbits of natural or artificial satellites is measured relative to the equatorial plane of the body they orbit, if they orbit sufficiently closely. The equatorial plane is the perpendicular to the axis of rotation of the central body. An inclination of 30° could also be described using an angle of 150°, the convention is that the normal orbit is prograde, an orbit in the same direction as the planet rotates. Inclinations greater than 90° describe retrograde orbits, thus, An inclination of 0° means the orbiting body has a prograde orbit in the planets equatorial plane. An inclination greater than 0° and less than 90° also describe prograde orbits, an inclination of 63. 4° is often called a critical inclination, when describing artificial satellites orbiting the Earth, because they have zero apogee drift. An inclination of exactly 90° is an orbit, in which the spacecraft passes over the north and south poles of the planet. An inclination greater than 90° and less than 180° is a retrograde orbit, an inclination of exactly 180° is a retrograde equatorial orbit. For gas giants, the orbits of moons tend to be aligned with the giant planets equator, the inclination of exoplanets or members of multiple stars is the angle of the plane of the orbit relative to the plane perpendicular to the line-of-sight from Earth to the object. An inclination of 0° is an orbit, meaning the plane of its orbit is parallel to the sky. An inclination of 90° is an orbit, meaning the plane of its orbit is perpendicular to the sky

5.
Japanese people
–
Japanese people are an ethnic group native to Japan. Japanese people make up 98. 5% of the population of their country. Worldwide, approximately 129 million people are of Japanese descent, of these, people of Japanese ancestry who live in other countries are referred to as the Japanese diaspora. The term ethnic Japanese may also be used in some contexts to refer to ethnic groups, including the Yamato, Ainu. The Japanese language is a Japonic language that in the past was treated as a language isolate, the Japanese language has a tripartite writing system using Hiragana, Katakana, and Kanji. Domestic Japanese people use primarily Japanese for daily interaction, the adult literacy rate in Japan exceeds 99%. Japanese religion has traditionally been syncretic in nature, combining elements of Buddhism, Shinto, a polytheistic religion with no book of religious canon, is Japans native religion. Mahayana Buddhism came to Japan in the century and evolved into many different sects. Today, the largest form of Buddhism among Japanese people is the Jōdo Shinshū sect founded by Shinran, most Japanese people profess to believe in both Shinto and Buddhism. Japanese peoples religion functions mostly as a foundation for mythology, traditions, Christianity in Japan is among the nations minority religions. Just under 2%, or about 2.5 million, of Japans population are Christians, many Japanese practice Christianity in the diaspora in Brazil, which is home to the largest Japanese population outside Japan. About 60% of Japanese Brazilians are Roman Catholics, while 90% of Japanese Mexicans are Roman Catholic, certain genres of writing originated in and are often associated with Japanese society. These include the haiku, tanka, and I Novel, although modern writers generally avoid these writing styles, historically, many works have sought to capture or codify traditional Japanese cultural values and aesthetics. Twentieth-century Japanese writers recorded changes in Japanese society through their works, some of the most notable authors included Natsume Sōseki, Junichirō Tanizaki, Osamu Dazai, Yasunari Kawabata, Fumiko Enchi, Yukio Mishima, and Ryōtarō Shiba. In contemporary Japan, popular authors such as Ryū Murakami, Haruki Murakami, decorative arts in Japan date back to prehistoric times. Jōmon pottery includes examples with elaborate ornamentation, in the Yayoi period, artisans produced mirrors, spears, and ceremonial bells known as dōtaku. Later burial mounds, or kofun, preserve characteristic clay haniwa, beginning in the Nara period, painting, calligraphy, and sculpture flourished under strong Confucian and Buddhist influences from China. Among the architectural achievements of this period are the Hōryū-ji and the Yakushi-ji, after the cessation of official relations with the Tang dynasty in the ninth century, Japanese art and architecture gradually became less influenced by China