The asteroid belt is the circumstellar disc in the Solar System located between the orbits of the planets Mars and Jupiter. It is occupied by numerous irregularly shaped bodies called minor planets; the asteroid belt is termed the main asteroid belt or main belt to distinguish it from other asteroid populations in the Solar System such as near-Earth asteroids and trojan asteroids. About half the mass of the belt is contained in the four largest asteroids: Ceres, Vesta and Hygiea; the total mass of the asteroid belt is 4% that of the Moon, or 22% that of Pluto, twice that of Pluto's moon Charon. Ceres, the asteroid belt's only dwarf planet, is about 950 km in diameter, whereas 4 Vesta, 2 Pallas, 10 Hygiea have mean diameters of less than 600 km; the remaining bodies range down to the size of a dust particle. The asteroid material is so thinly distributed that numerous unmanned spacecraft have traversed it without incident. Nonetheless, collisions between large asteroids do occur, these can produce an asteroid family whose members have similar orbital characteristics and compositions.
Individual asteroids within the asteroid belt are categorized by their spectra, with most falling into three basic groups: carbonaceous and metal-rich. The asteroid belt formed from the primordial solar nebula as a group of planetesimals. Planetesimals are the smaller precursors of the protoplanets. Between Mars and Jupiter, gravitational perturbations from Jupiter imbued the protoplanets with too much orbital energy for them to accrete into a planet. Collisions became too violent, instead of fusing together, the planetesimals and most of the protoplanets shattered; as a result, 99.9% of the asteroid belt's original mass was lost in the first 100 million years of the Solar System's history. Some fragments found their way into the inner Solar System, leading to meteorite impacts with the inner planets. Asteroid orbits continue to be appreciably perturbed whenever their period of revolution about the Sun forms an orbital resonance with Jupiter. At these orbital distances, a Kirkwood gap occurs. Classes of small Solar System bodies in other regions are the near-Earth objects, the centaurs, the Kuiper belt objects, the scattered disc objects, the sednoids, the Oort cloud objects.
On 22 January 2014, ESA scientists reported the detection, for the first definitive time, of water vapor on Ceres, the largest object in the asteroid belt. The detection was made by using the far-infrared abilities of the Herschel Space Observatory; the finding was unexpected because comets, not asteroids, are considered to "sprout jets and plumes". According to one of the scientists, "The lines are becoming more and more blurred between comets and asteroids." In 1596, Johannes Kepler predicted “Between Mars and Jupiter, I place a planet” in his Mysterium Cosmographicum. While analyzing Tycho Brahe's data, Kepler thought that there was too large a gap between the orbits of Mars and Jupiter. In an anonymous footnote to his 1766 translation of Charles Bonnet's Contemplation de la Nature, the astronomer Johann Daniel Titius of Wittenberg noted an apparent pattern in the layout of the planets. If one began a numerical sequence at 0 included 3, 6, 12, 24, 48, etc. doubling each time, added four to each number and divided by 10, this produced a remarkably close approximation to the radii of the orbits of the known planets as measured in astronomical units provided one allowed for a "missing planet" between the orbits of Mars and Jupiter.
In his footnote, Titius declared "But should the Lord Architect have left that space empty? Not at all."When William Herschel discovered Uranus in 1781, the planet's orbit matched the law perfectly, leading astronomers to conclude that there had to be a planet between the orbits of Mars and Jupiter. On January 1, 1801, Giuseppe Piazzi, chair of astronomy at the University of Palermo, found a tiny moving object in an orbit with the radius predicted by this pattern, he dubbed it "Ceres", after the Roman goddess of the patron of Sicily. Piazzi believed it to be a comet, but its lack of a coma suggested it was a planet. Thus, the aforementioned pattern, now known as the Titius–Bode law, predicted the semi-major axes of all eight planets of the time. Fifteen months Heinrich Olbers discovered a second object in the same region, Pallas. Unlike the other known planets and Pallas remained points of light under the highest telescope magnifications instead of resolving into discs. Apart from their rapid movement, they appeared indistinguishable from stars.
Accordingly, in 1802, William Herschel suggested they be placed into a separate category, named "asteroids", after the Greek asteroeides, meaning "star-like". Upon completing a series of observations of Ceres and Pallas, he concluded, Neither the appellation of planets nor that of comets, can with any propriety of language be given to these two stars... They resemble small stars so much. From this, their asteroidal appearance, if I take my name, call them Asteroids. By 1807, further investigation revealed two new objects in the region: Vesta; the burning of Lilienthal in the Napoleonic wars, where the main body of work had been done, brought this first period of discovery to a close. Despite Herschel's coinage, for several decades it remained common practice to refer to these objects as planets and to prefix t
In astronomy, magnitude is a unitless measure of the brightness of an object in a defined passband in the visible or infrared spectrum, but sometimes across all wavelengths. An imprecise but systematic determination of the magnitude of objects was introduced in ancient times by Hipparchus; the scale is logarithmic and defined such that each step of one magnitude changes the brightness by a factor of the fifth root of 100, or 2.512. For example, a magnitude 1 star is 100 times brighter than a magnitude 6 star; the brighter an object appears, the lower the value of its magnitude, with the brightest objects reaching negative values. Astronomers use two different definitions of magnitude: absolute magnitude; the apparent magnitude is the brightness of an object. Apparent magnitude depends on an object's intrinsic luminosity, its distance, the extinction reducing its brightness; the absolute magnitude describes the intrinsic luminosity emitted by an object and is defined to be equal to the apparent magnitude that the object would have if it were placed at a certain distance from Earth, 10 parsecs for stars.
A more complex definition of absolute magnitude is used for planets and small Solar System bodies, based on its brightness at one astronomical unit from the observer and the Sun. The Sun has an apparent magnitude of −27 and Sirius, the brightest visible star in the night sky, −1.46. Apparent magnitudes can be assigned to artificial objects in Earth orbit with the International Space Station sometimes reaching a magnitude of −6; the magnitude system dates back 2000 years to the Greek astronomer Hipparchus who classified stars by their apparent brightness, which they saw as size. To the unaided eye, a more prominent star such as Sirius or Arcturus appears larger than a less prominent star such as Mizar, which in turn appears larger than a faint star such as Alcor. In 1736, the mathematician John Keill described the ancient naked-eye magnitude system in this way: The fixed Stars appear to be of different Bignesses, not because they are so, but because they are not all distant from us; those that are nearest will excel in Bigness.
Hence arise the Distribution of Stars, according to their Order and Dignity, into Classes. For all the other Stars, which are only seen by the Help of a Telescope, which are called Telescopical, are not reckoned among these six Orders. Altho' the Distinction of Stars into six Degrees of Magnitude is received by Astronomers, and among those Stars which are reckoned of the brightest Class, there appears a Variety of Magnitude. For Example: The little Dog was by Tycho placed among the Stars of the second Magnitude, which Ptolemy reckoned among the Stars of the first Class: And therefore it is not either of the first or second Order, but ought to be ranked in a Place between both. Note that the brighter the star, the smaller the magnitude: Bright "first magnitude" stars are "1st-class" stars, while stars visible to the naked eye are "sixth magnitude" or "6th-class"; the system was a simple delineation of stellar brightness into six distinct groups but made no allowance for the variations in brightness within a group.
Tycho Brahe attempted to directly measure the "bigness" of the stars in terms of angular size, which in theory meant that a star's magnitude could be determined by more than just the subjective judgment described in the above quote. He concluded that first magnitude stars measured 2 arc minutes in apparent diameter, with second through sixth magnitude stars measuring 1 1⁄2′, 1 1⁄12′, 3⁄4′, 1⁄2′, 1⁄3′, respectively; the development of the telescope showed that these large sizes were illusory—stars appeared much smaller through the telescope. However, early telescopes produced a spurious disk-like image of a star, larger for brighter stars and smaller for fainter ones. Astronomers from Galileo to Jaques Cassini mistook these spurious disks for the physical bodies of stars, thus into the eighteenth century continued to think of magnitude in terms of the physical size of a star. Johannes Hevelius produced a precise table of star sizes measured telescopically, but now the measured diameters ranged from just over six seconds of arc for first magnitude down to just under 2 seconds for sixth magnitude.
By the time of William Herschel astronomers recognized that the telescopic disks of stars were spurious and a function of the telescope as well as the brightness of the stars, but still spoke in terms of a star's size more than its brightness. Well into the nineteenth century the magnitude system
B-type asteroids are a uncommon type of carbonaceous asteroid, falling into the wider C-group. In the asteroid population, B-class objects can be found in the outer asteroid belt, dominate the high-inclination Pallas family which includes the second-largest asteroid 2 Pallas, they are thought to be volatile-rich remnants from the early Solar System. There are 65 known B-type asteroids in the SMASS classification, 9 in the Tholen classification as of March 2015. Similar to the C-type objects, but differing in that the ultraviolet absorption below 0.5 μm is small or absent, the spectrum is rather bluish than reddish. The albedo tends to be greater than in the very dark C type. Spectroscopy of B-class objects suggests major surface constituents of anhydrous silicates, hydrated clay minerals, organic polymers and sulfides; the closest matches to B-class asteroids have been obtained on carbonaceous chondrite meteorites that have been heated in the laboratory. Asteroid Bennu is a B-type asteroid, the target of the OSIRIS-REx mission.
The mission seeks to characterize the asteroid by mapping the surface, studying the Yarkovsky effect, retrieving a sample of the asteroid to return in 2023. The spacecraft was launched in 2016; the asteroids are: Asteroid spectral types
An hour is a unit of time conventionally reckoned as 1⁄24 of a day and scientifically reckoned as 3,599–3,601 seconds, depending on conditions. The hour was established in the ancient Near East as a variable measure of 1⁄12 of the night or daytime; such seasonal, temporal, or unequal hours varied by latitude. The hour was subsequently divided into each of 60 seconds. Equal or equinoctial hours were taken as 1⁄24 of the day. Since this unit was not constant due to long term variations in the Earth's rotation, the hour was separated from the Earth's rotation and defined in terms of the atomic or physical second. In the modern metric system, hours are an accepted unit of time defined as 3,600 atomic seconds. However, on rare occasions an hour may incorporate a positive or negative leap second, making it last 3,599 or 3,601 seconds, in order to keep it within 0.9 seconds of UT1, based on measurements of the mean solar day. The modern English word hour is a development of the Anglo-Norman houre and Middle English ure, first attested in the 13th century.
It displaced the Old English "tide" and "stound". The Anglo-Norman term was a borrowing of Old French ure, a variant of ore, which derived from Latin hōra and Greek hṓrā. Like Old English tīd and stund, hṓrā was a vaguer word for any span of time, including seasons and years, its Proto-Indo-European root has been reconstructed as *yeh₁-, making hour distantly cognate with year. The time of day is expressed in English in terms of hours. Whole hours on a 12-hour clock are expressed using the contracted phrase o'clock, from the older of clock. Hours on a 24-hour clock are expressed as "hundred" or "hundred hours". Fifteen and thirty minutes past the hour is expressed as "a quarter past" or "after" and "half past" from their fraction of the hour. Fifteen minutes before the hour may be expressed as "a quarter to", "of", "till", or "before" the hour; the ancient Egyptians began dividing the night into wnwt at some time before the compilation of the Dynasty V Pyramid Texts in the 24th century BC. By 2150 BC, diagrams of stars inside Egyptian coffin lids—variously known as "diagonal calendars" or "star clocks"—attest that there were 12 of these.
Clagett writes that it is "certain" this duodecimal division of the night followed the adoption of the Egyptian civil calendar placed c. 2800 BC on the basis of analyses of the Sothic cycle, but a lunar calendar long predated this and would have had twelve months in each of its years. The coffin diagrams show that the Egyptians took note of the heliacal risings of 36 stars or constellations, one for each of the ten-day "weeks" of their civil calendar; each night, the rising of eleven of these decans were noted, separating the night into twelve divisions whose middle terms would have lasted about 40 minutes each. The original decans used by the Egyptians would have fallen noticeably out of their proper places over a span of several centuries. By the time of Amenhotep III, the priests at Karnak were using water clocks to determine the hours; these were filled to the brim at sunset and the hour determined by comparing the water level against one of its twelve gauges, one for each month of the year.
During the New Kingdom, another system of decans was used, made up of 24 stars over the course of the year and 12 within any one night. The division of the day into 12 hours was accomplished by sundials marked with ten equal divisions; the morning and evening periods when the sundials failed to note time were observed as the first and last hours. The Egyptian hours were connected both with the priesthood of the gods and with their divine services. By the New Kingdom, each hour was conceived as a specific region of the sky or underworld through which Ra's solar barge travelled. Protective deities were used as the names of the hours; as the protectors and resurrectors of the sun, the goddesses of the night hours were considered to hold power over all lifespans and thus became part of Egyptian funerary rituals. Two fire-spitting cobras were said to guard the gates of each hour of the underworld, Wadjet and the rearing cobra were sometimes referenced as wnwt from their role protecting the dead through these gates.
The Egyptian for astronomer, used as a synonym for priest, was wnwty, "One of the Hours" or "Hour-Watcher". The earliest forms of wnwt include one or three stars, with the solar hours including the determinative hieroglyph for "sun". Ancient China divided its day into 100 "marks" running from midnight to midnight; the system is said to have been used since remote antiquity, credited to the legendary Yellow Emperor, but is first attested in Han-era water clocks and in the 2nd-century history of that dynasty. It was measured with sundials and water clocks. Into the Eastern Han, the Chinese measured their day schematically, adding the 20-ke difference between the solstices evenly throughout the year, one every nine days. During the night, time was more commonly
The density, or more the volumetric mass density, of a substance is its mass per unit volume. The symbol most used for density is ρ, although the Latin letter D can be used. Mathematically, density is defined as mass divided by volume: ρ = m V where ρ is the density, m is the mass, V is the volume. In some cases, density is loosely defined as its weight per unit volume, although this is scientifically inaccurate – this quantity is more called specific weight. For a pure substance the density has the same numerical value as its mass concentration. Different materials have different densities, density may be relevant to buoyancy and packaging. Osmium and iridium are the densest known elements at standard conditions for temperature and pressure but certain chemical compounds may be denser. To simplify comparisons of density across different systems of units, it is sometimes replaced by the dimensionless quantity "relative density" or "specific gravity", i.e. the ratio of the density of the material to that of a standard material water.
Thus a relative density less than one means. The density of a material varies with pressure; this variation is small for solids and liquids but much greater for gases. Increasing the pressure on an object decreases the volume of the object and thus increases its density. Increasing the temperature of a substance decreases its density by increasing its volume. In most materials, heating the bottom of a fluid results in convection of the heat from the bottom to the top, due to the decrease in the density of the heated fluid; this causes it to rise relative to more dense unheated material. The reciprocal of the density of a substance is called its specific volume, a term sometimes used in thermodynamics. Density is an intensive property in that increasing the amount of a substance does not increase its density. In a well-known but apocryphal tale, Archimedes was given the task of determining whether King Hiero's goldsmith was embezzling gold during the manufacture of a golden wreath dedicated to the gods and replacing it with another, cheaper alloy.
Archimedes knew that the irregularly shaped wreath could be crushed into a cube whose volume could be calculated and compared with the mass. Baffled, Archimedes is said to have taken an immersion bath and observed from the rise of the water upon entering that he could calculate the volume of the gold wreath through the displacement of the water. Upon this discovery, he leapt from his bath and ran naked through the streets shouting, "Eureka! Eureka!". As a result, the term "eureka" entered common parlance and is used today to indicate a moment of enlightenment; the story first appeared in written form in Vitruvius' books of architecture, two centuries after it took place. Some scholars have doubted the accuracy of this tale, saying among other things that the method would have required precise measurements that would have been difficult to make at the time. From the equation for density, mass density has units of mass divided by volume; as there are many units of mass and volume covering many different magnitudes there are a large number of units for mass density in use.
The SI unit of kilogram per cubic metre and the cgs unit of gram per cubic centimetre are the most used units for density. One g/cm3 is equal to one thousand kg/m3. One cubic centimetre is equal to one millilitre. In industry, other larger or smaller units of mass and or volume are more practical and US customary units may be used. See below for a list of some of the most common units of density. A number of techniques as well as standards exist for the measurement of density of materials; such techniques include the use of a hydrometer, Hydrostatic balance, immersed body method, air comparison pycnometer, oscillating densitometer, as well as pour and tap. However, each individual method or technique measures different types of density, therefore it is necessary to have an understanding of the type of density being measured as well as the type of material in question; the density at all points of a homogeneous object equals its total mass divided by its total volume. The mass is measured with a scale or balance.
To determine the density of a liquid or a gas, a hydrometer, a dasymeter or a Coriolis flow meter may be used, respectively. Hydrostatic weighing uses the displacement of water due to a submerged object to determine the density of the object. If the body is not homogeneous its density varies between different regions of the object. In that case the density around any given location is determined by calculating the density of a small volume around that location. In the limit of an infinitesimal volume the density of an inhomogeneous object at a point becomes: ρ = d m / d V, where d V is an elementary volume at position r; the mass of the body t
The Hygiea or Hygiean family of asteroids is a grouping of dark, carbonaceous C-type and B-type asteroids in outer asteroid belt, the largest member of, 10 Hygiea. About 1% of all known asteroids in the asteroid belt belong to this family. By far the largest member is 10 Hygiea, a 400 km diameter C-type asteroid, the fourth largest in the belt; the remaining members are much smaller. The two next largest members are 333 Badenia, 538 Friederike, both just over 70 km in diameter. After that, the remaining members have diameters of less than 30 km; the Hygiea family is thought to be of the cratering type, implying that it was formed as a result of a giant impact that excavated the much smaller family members from Hygiea. However, the two 70-kilometer-diameter bodies are still large to have been excavated in an impact that did not disrupt the parent body, they may be interlopers despite having a similar spectral type to Hygiea, because dark carbonaceous asteroids dominate the outer asteroid belt. The family contains a significant number of objects of the otherwise rare B spectral type.
The largest of these is the mentioned 538 Friederike. There are some indications that this family is quite old. A HCM numerical analysis by found a'core' group of family members, whose proper orbital elements lie in the approximate ranges At the present epoch, the range of osculating orbital elements of these core members is The 1995 analysis by Zappalà found 103 core members, whereas a search of a recent proper element database for 96944 minor planets in 2005 yielded 1043 objects lying within the rectangular-shaped region defined by the first table above; this would give about 1% of all asteroids in the asteroid belt. This family contains quite a large number of identified interlopers; the following have been identified in a spectral survey, by inspection of the PDS asteroid taxonomy data set for S- and D-type members: 100 Hekate, 108 Hecuba, 1109 Tata, 1209 Pumma, 1599 Giomus. In fact, some of the other asteroids of the C spectral type are interlopers as well, due to the prevalence of this spectral type in the region.
Possible candidates include 333 Badenia and 538 Friederike, based on their unusually large size for cratering family members. 52 Europa, a large 300 km diameter asteroid orbits nearby with a proper inclination of 6.37°, was sometimes considered part of the Hygiea family in the past, but it is an unrelated asteroid. A better sampling of asteroids in the area in recent years has shown that it orbits well beyond the Hygiea family clump. Zappalà, Vincenzo. Mothé-Diniz, T. et al.. Tanga, P. et al.. AstDys site. Proper elements for 96944 numbered minor planets
The orbital eccentricity of an astronomical object is a parameter that determines the amount by which its orbit around another body deviates from a perfect circle. A value of 0 is a circular orbit, values between 0 and 1 form an elliptic orbit, 1 is a parabolic escape orbit, greater than 1 is a hyperbola; the term derives its name from the parameters of conic sections, as every Kepler orbit is a conic section. It is used for the isolated two-body problem, but extensions exist for objects following a Klemperer rosette orbit through the galaxy. In a two-body problem with inverse-square-law force, every orbit is a Kepler orbit; the eccentricity of this Kepler orbit is a non-negative number. The eccentricity may take the following values: circular orbit: e = 0 elliptic orbit: 0 < e < 1 parabolic trajectory: e = 1 hyperbolic trajectory: e > 1 The eccentricity e is given by e = 1 + 2 E L 2 m red α 2 where E is the total orbital energy, L is the angular momentum, mred is the reduced mass, α the coefficient of the inverse-square law central force such as gravity or electrostatics in classical physics: F = α r 2 or in the case of a gravitational force: e = 1 + 2 ε h 2 μ 2 where ε is the specific orbital energy, μ the standard gravitational parameter based on the total mass, h the specific relative angular momentum.
For values of e from 0 to 1 the orbit's shape is an elongated ellipse. The limit case between an ellipse and a hyperbola, when e equals 1, is parabola. Radial trajectories are classified as elliptic, parabolic, or hyperbolic based on the energy of the orbit, not the eccentricity. Radial orbits hence eccentricity equal to one. Keeping the energy constant and reducing the angular momentum, elliptic and hyperbolic orbits each tend to the corresponding type of radial trajectory while e tends to 1. For a repulsive force only the hyperbolic trajectory, including the radial version, is applicable. For elliptical orbits, a simple proof shows that arcsin yields the projection angle of a perfect circle to an ellipse of eccentricity e. For example, to view the eccentricity of the planet Mercury, one must calculate the inverse sine to find the projection angle of 11.86 degrees. Next, tilt any circular object by that angle and the apparent ellipse projected to your eye will be of that same eccentricity; the word "eccentricity" comes from Medieval Latin eccentricus, derived from Greek ἔκκεντρος ekkentros "out of the center", from ἐκ- ek-, "out of" + κέντρον kentron "center".
"Eccentric" first appeared in English in 1551, with the definition "a circle in which the earth, sun. Etc. deviates from its center". By five years in 1556, an adjectival form of the word had developed; the eccentricity of an orbit can be calculated from the orbital state vectors as the magnitude of the eccentricity vector: e = | e | where: e is the eccentricity vector. For elliptical orbits it can be calculated from the periapsis and apoapsis since rp = a and ra = a, where a is the semimajor axis. E = r a − r p r a + r p = 1 − 2 r a r p + 1 where: ra is the radius at apoapsis. Rp is the radius at periapsis; the eccentricity of an elliptical orbit can be used to obtain the ratio of the periapsis to the apoapsis: r p r a = 1 − e 1 + e For Earth, orbital eccentricity ≈ 0.0167, apoapsis= aphelion and periapsis= perihelion relative to sun. For Earth's annual orbit path, ra/rp ratio = longest_radius / shortest_radius ≈ 1.034 relative to center point of path. The eccentricity of the Earth's orbit is about 0.0167.