Semiregular variable star
Semiregular variable stars are giants or supergiants of intermediate and late spectral type showing considerable periodicity in their light changes, accompanied or sometimes interrupted by various irregularities. Periods lie in the range from 20 to more than 2000 days, while the shapes of the light curves may be rather different and variable with each cycle; the amplitudes may be from several hundredths to several magnitudes. The semiregular variable stars have been sub-divided into four categories for many decades, with a fifth related group defined more recently; the original definitions of the four main groups were formalised in 1958 at the tenth general assembly of the International Astronomical Union. The General Catalogue of Variable Stars has updated the definitions with some additional information and provided newer reference stars where old examples such as S Vul have been re-classified; the semiregular variable stars the SRa and SRb sub-classes, are grouped the Mira variables under the long-period variable heading.
In other situations, the term is expanded to cover all cool pulsating stars. The semi-regular giant stars are related to the Mira variables: Mira stars pulsate in the fundamental mode. Photometric studies in the Large Magellanic Cloud looking for gravitational microlensing events have shown that all cool evolved stars are variable, with the coolest stars showing large amplitudes and warmer stars showing only micro-variations; the semiregular variable stars fall on one of five main period-luminosity relationship sequences identified, differing from the Mira variables only in pulsating in an overtone mode. The related OSARG variables pulsate in an unknown mode. Many semiregular variables show long secondary periods around ten times the main pulsation period, with amplitudes of a few tenths of a magnitude at visual wavelengths; the cause of the pulsations is not known. Η Gem is the brightest SRa variable, an eclipsing binary. GZ Peg is an SRa variable and S-type star with a maximum magnitude of 4.95.
T Cen is listed as the next-brightest SRa example, but it is suggested that it may be an RV Tauri variable, which would make it by far the brightest member of that class. There are numerous naked-eye SRb stars, with third-magnitude L2 Pup being the brightest listed in the GCVS. Σ Lib and ρ Per are third-magnitude SRb stars at maximum brightness. Β Gru is a second magnitude star classified as a slow irregular variable by the GCVS, but reported to be of SRa type by research. These four are all class M giants, although some SRb variables are carbon stars such as UU Aur or S-type stars such as Pi1 Gru. Catalogued SRc stars are less numerous, but include some of the brightest stars in the sky such as Betelgeuse and α Her. Although SRc stars are defined as being supergiants, a number of them have giant spectral luminosity classes and some such as α Her are known to be asymptotic giant branch stars. Many SRd stars are luminous hypergiants, including the naked-eye ρ Cas, V509 Cas, ο1 Cen. Others are classified as giant stars.
Most SRS variables have been discovered in deep large-scale surveys, but the naked-eye stars V428 And, AV Ari, EL Psc are members. List of semiregular variable stars Low-dimensional chaos in stellar pulsations Variable star designation EU Delphini and the Small-Amplitude Pulsating Red Giants Y Lyncis Pulsating variable stars and the H-R diagram
Stellar evolution is the process by which a star changes over the course of time. Depending on the mass of the star, its lifetime can range from a few million years for the most massive to trillions of years for the least massive, longer than the age of the universe; the table shows the lifetimes of stars as a function of their masses. All stars are born from collapsing clouds of gas and dust called nebulae or molecular clouds. Over the course of millions of years, these protostars settle down into a state of equilibrium, becoming what is known as a main-sequence star. Nuclear fusion powers a star for most of its life; the energy is generated by the fusion of hydrogen atoms at the core of the main-sequence star. As the preponderance of atoms at the core becomes helium, stars like the Sun begin to fuse hydrogen along a spherical shell surrounding the core; this process causes the star to grow in size, passing through the subgiant stage until it reaches the red giant phase. Stars with at least half the mass of the Sun can begin to generate energy through the fusion of helium at their core, whereas more-massive stars can fuse heavier elements along a series of concentric shells.
Once a star like the Sun has exhausted its nuclear fuel, its core collapses into a dense white dwarf and the outer layers are expelled as a planetary nebula. Stars with around ten or more times the mass of the Sun can explode in a supernova as their inert iron cores collapse into an dense neutron star or black hole. Although the universe is not old enough for any of the smallest red dwarfs to have reached the end of their lives, stellar models suggest they will become brighter and hotter before running out of hydrogen fuel and becoming low-mass white dwarfs. Stellar evolution is not studied by observing the life of a single star, as most stellar changes occur too to be detected over many centuries. Instead, astrophysicists come to understand how stars evolve by observing numerous stars at various points in their lifetime, by simulating stellar structure using computer models. Stellar evolution starts with the gravitational collapse of a giant molecular cloud. Typical giant molecular clouds are 100 light-years across and contain up to 6,000,000 solar masses.
As it collapses, a giant molecular cloud breaks into smaller pieces. In each of these fragments, the collapsing gas releases gravitational potential energy as heat; as its temperature and pressure increase, a fragment condenses into a rotating sphere of superhot gas known as a protostar. A protostar continues to grow by accretion of gas and dust from the molecular cloud, becoming a pre-main-sequence star as it reaches its final mass. Further development is determined by its mass. Mass is compared to the mass of the Sun: 1.0 M☉ means 1 solar mass. Protostars are encompassed in dust, are thus more visible at infrared wavelengths. Observations from the Wide-field Infrared Survey Explorer have been important for unveiling numerous Galactic protostars and their parent star clusters. Protostars with masses less than 0.08 M☉ never reach temperatures high enough for nuclear fusion of hydrogen to begin. These are known as brown dwarfs; the International Astronomical Union defines brown dwarfs as stars massive enough to fuse deuterium at some point in their lives.
Objects smaller than 13 MJ are classified as sub-brown dwarfs. Both types, deuterium-burning and not, shine dimly and die away cooling over hundreds of millions of years. For a more-massive protostar, the core temperature will reach 10 million kelvin, initiating the proton–proton chain reaction and allowing hydrogen to fuse, first to deuterium and to helium. In stars of over 1 M☉, the carbon–nitrogen–oxygen fusion reaction contributes a large portion of the energy generation; the onset of nuclear fusion leads quickly to a hydrostatic equilibrium in which energy released by the core maintains a high gas pressure, balancing the weight of the star's matter and preventing further gravitational collapse. The star thus evolves to a stable state, beginning the main-sequence phase of its evolution. A new star will sit at a specific point on the main sequence of the Hertzsprung–Russell diagram, with the main-sequence spectral type depending upon the mass of the star. Small cold, low-mass red dwarfs fuse hydrogen and will remain on the main sequence for hundreds of billions of years or longer, whereas massive, hot O-type stars will leave the main sequence after just a few million years.
A mid-sized yellow dwarf star, like the Sun, will remain on the main sequence for about 10 billion years. The Sun is thought to be in the middle of its main sequence lifespan; the core exhausts its supply of hydrogen and the star begins to evolve off of the main sequence. Without the outward pressure generated by the fusion of hydrogen to counteract the force of gravity the core contracts until either electron degeneracy pressure becomes sufficient to oppose gravity or the core becomes hot enough for helium fusion to begin. Which of these happens first depends upon the star's mass. What happens after a low-mass star ceases to produce energy through fusion has not been directly observed. Recent astrophysical models suggest that red dwarfs of 0.1 M☉ may stay on the main sequence for some six to twelve tril
In astronomy, luminosity is the total amount of energy emitted per unit of time by a star, galaxy, or other astronomical object. As a term for energy emitted per unit time, luminosity is synonymous with power. In SI units luminosity is measured in joules per second or watts. Values for luminosity are given in the terms of the luminosity of the Sun, L⊙. Luminosity can be given in terms of the astronomical magnitude system: the absolute bolometric magnitude of an object is a logarithmic measure of its total energy emission rate, while absolute magnitude is a logarithmic measure of the luminosity within some specific wavelength range or filter band. In contrast, the term brightness in astronomy is used to refer to an object's apparent brightness: that is, how bright an object appears to an observer. Apparent brightness depends on both the luminosity of the object and the distance between the object and observer, on any absorption of light along the path from object to observer. Apparent magnitude is a logarithmic measure of apparent brightness.
The distance determined by luminosity measures can be somewhat ambiguous, is thus sometimes called the luminosity distance. In astronomy, luminosity is the amount of electromagnetic energy; when not qualified, the term "luminosity" means bolometric luminosity, measured either in the SI units, watts, or in terms of solar luminosities. A bolometer is the instrument used to measure radiant energy over a wide band by absorption and measurement of heating. A star radiates neutrinos, which carry off some energy, contributing to the star's total luminosity; the IAU has defined a nominal solar luminosity of 3.828×1026 W to promote publication of consistent and comparable values in units of the solar luminosity. While bolometers do exist, they cannot be used to measure the apparent brightness of a star because they are insufficiently sensitive across the electromagnetic spectrum and because most wavelengths do not reach the surface of the Earth. In practice bolometric magnitudes are measured by taking measurements at certain wavelengths and constructing a model of the total spectrum, most to match those measurements.
In some cases, the process of estimation is extreme, with luminosities being calculated when less than 1% of the energy output is observed, for example with a hot Wolf-Rayet star observed only in the infra-red. Bolometric luminosities can be calculated using a bolometric correction to a luminosity in a particular passband; the term luminosity is used in relation to particular passbands such as a visual luminosity of K-band luminosity. These are not luminosities in the strict sense of an absolute measure of radiated power, but absolute magnitudes defined for a given filter in a photometric system. Several different photometric systems exist; some such as the UBV or Johnson system are defined against photometric standard stars, while others such as the AB system are defined in terms of a spectral flux density. A star's luminosity can be determined from two stellar characteristics: size and effective temperature; the former is represented in terms of solar radii, R⊙, while the latter is represented in kelvins, but in most cases neither can be measured directly.
To determine a star's radius, two other metrics are needed: the star's angular diameter and its distance from Earth. Both can be measured with great accuracy in certain cases, with cool supergiants having large angular diameters, some cool evolved stars having masers in their atmospheres that can be used to measure the parallax using VLBI. However, for most stars the angular diameter or parallax, or both, are far below our ability to measure with any certainty. Since the effective temperature is a number that represents the temperature of a black body that would reproduce the luminosity, it cannot be measured directly, but it can be estimated from the spectrum. An alternative way to measure stellar luminosity is to measure the star's apparent brightness and distance. A third component needed to derive the luminosity is the degree of interstellar extinction, present, a condition that arises because of gas and dust present in the interstellar medium, the Earth's atmosphere, circumstellar matter.
One of astronomy's central challenges in determining a star's luminosity is to derive accurate measurements for each of these components, without which an accurate luminosity figure remains elusive. Extinction can only be measured directly if the actual and observed luminosities are both known, but it can be estimated from the observed colour of a star, using models of the expected level of reddening from the interstellar medium. In the current system of stellar classification, stars are grouped according to temperature, with the massive young and energetic Class O stars boasting temperatures in excess of 30,000 K while the less massive older Class M stars exhibit temperatures less than 3,500 K; because luminosity is proportional to temperature to the fourth power, the large variation in stellar temperatures produces an vaster variation in stellar luminosity. Because the luminosity depends on a high power of the stellar mass, high mass luminous stars have much shorter lifetimes; the most luminous stars are always young stars, no more than a few million years for the most extreme.
In the Hertzsprung–Russell diagram, the x-axis represents temperature or spectral type while the y-axis represents luminosity or magnitude. The vast majority of stars are found along the main sequence with blue Class O stars found at the top left of the chart while red Class M stars fall to the bottom right. Certain stars like Deneb and Betelgeuse are
Astrometry is the branch of astronomy that involves precise measurements of the positions and movements of stars and other celestial bodies. The information obtained by astrometric measurements provides information on the kinematics and physical origin of the Solar System and our galaxy, the Milky Way; the history of astrometry is linked to the history of star catalogues, which gave astronomers reference points for objects in the sky so they could track their movements. This can be dated back to Hipparchus, who around 190 BC used the catalogue of his predecessors Timocharis and Aristillus to discover Earth's precession. In doing so, he developed the brightness scale still in use today. Hipparchus compiled a catalogue with their positions. Hipparchus's successor, included a catalogue of 1,022 stars in his work the Almagest, giving their location and brightness. In the 10th century, Abd al-Rahman al-Sufi carried out observations on the stars and described their positions and star color. Ibn Yunus observed more than 10,000 entries for the Sun's position for many years using a large astrolabe with a diameter of nearly 1.4 metres.
His observations on eclipses were still used centuries in Simon Newcomb's investigations on the motion of the Moon, while his other observations of the motions of the planets Jupiter and Saturn inspired Laplace's Obliquity of the Ecliptic and Inequalities of Jupiter and Saturn. In the 15th century, the Timurid astronomer Ulugh Beg compiled the Zij-i-Sultani, in which he catalogued 1,019 stars. Like the earlier catalogs of Hipparchus and Ptolemy, Ulugh Beg's catalogue is estimated to have been precise to within 20 minutes of arc. In the 16th century, Tycho Brahe used improved instruments, including large mural instruments, to measure star positions more than with a precision of 15–35 arcsec. Taqi al-Din measured the right ascension of the stars at the Constantinople Observatory of Taqi ad-Din using the "observational clock" he invented; when telescopes became commonplace, setting circles sped measurements James Bradley first tried to measure stellar parallaxes in 1729. The stellar movement proved too insignificant for his telescope, but he instead discovered the aberration of light and the nutation of the Earth's axis.
His cataloguing of 3222 stars was refined in 1807 by Friedrich Bessel, the father of modern astrometry. He made the first measurement of stellar parallax: 0.3 arcsec for the binary star 61 Cygni. Being difficult to measure, only about 60 stellar parallaxes had been obtained by the end of the 19th century by use of the filar micrometer. Astrographs using astronomical photographic plates sped the process in the early 20th century. Automated plate-measuring machines and more sophisticated computer technology of the 1960s allowed more efficient compilation of star catalogues. In the 1980s, charge-coupled devices replaced photographic plates and reduced optical uncertainties to one milliarcsecond; this technology made astrometry less expensive. In 1989, the European Space Agency's Hipparcos satellite took astrometry into orbit, where it could be less affected by mechanical forces of the Earth and optical distortions from its atmosphere. Operated from 1989 to 1993, Hipparcos measured large and small angles on the sky with much greater precision than any previous optical telescopes.
During its 4-year run, the positions and proper motions of 118,218 stars were determined with an unprecedented degree of accuracy. A new "Tycho catalog" drew together a database of 1,058,332 to within 20-30 mas. Additional catalogues were compiled for the 23,882 double/multiple stars and 11,597 variable stars analyzed during the Hipparcos mission. Today, the catalogue most used is USNO-B1.0, an all-sky catalogue that tracks proper motions, positions and other characteristics for over one billion stellar objects. During the past 50 years, 7,435 Schmidt camera plates were used to complete several sky surveys that make the data in USNO-B1.0 accurate to within 0.2 arcsec. Apart from the fundamental function of providing astronomers with a reference frame to report their observations in, astrometry is fundamental for fields like celestial mechanics, stellar dynamics and galactic astronomy. In observational astronomy, astrometric techniques help identify stellar objects by their unique motions, it is instrumental for keeping time, in that UTC is the atomic time synchronized to Earth's rotation by means of exact astronomical observations.
Astrometry is an important step in the cosmic distance ladder because it establishes parallax distance estimates for stars in the Milky Way. Astrometry has been used to support claims of extrasolar planet detection by measuring the displacement the proposed planets cause in their parent star's apparent position on the sky, due to their mutual orbit around the center of mass of the system. Astrometry is more accurate in space missions that are not affected by the distorting effects of the Earth's atmosphere. NASA's planned Space Interferometry Mission was to utilize astrometric techniques to detect terrestrial planets orbiting 200 or so of the nearest solar-type stars; the European Space Agency's Gaia Mission, launched in 2013, applies astrometric techniques in its stellar census. In addition to the detection of exoplanets, it can be used to determine their mass. Astrometric measurements are used by astrophysicists to constrain certain models in celestial mechanics. By measuring the velocities of pulsars, it is possible to put a limit on the asymmetry of supernova explosions.
A constellation is a group of stars that forms an imaginary outline or pattern on the celestial sphere representing an animal, mythological person or creature, a god, or an inanimate object. The origins of the earliest constellations go back to prehistory. People used them to relate stories of their beliefs, creation, or mythology. Different cultures and countries adopted their own constellations, some of which lasted into the early 20th century before today's constellations were internationally recognized. Adoption of constellations has changed over time. Many have changed in shape; some became popular. Others were limited to single nations; the 48 traditional Western constellations are Greek. They are given in Aratus' work Phenomena and Ptolemy's Almagest, though their origin predates these works by several centuries. Constellations in the far southern sky were added from the 15th century until the mid-18th century when European explorers began traveling to the Southern Hemisphere. Twelve ancient constellations belong to the zodiac.
The origins of the zodiac remain uncertain. In 1928, the International Astronomical Union formally accepted 88 modern constellations, with contiguous boundaries that together cover the entire celestial sphere. Any given point in a celestial coordinate system lies in one of the modern constellations; some astronomical naming systems include the constellation where a given celestial object is found to convey its approximate location in the sky. The Flamsteed designation of a star, for example, consists of a number and the genitive form of the constellation name. Other star patterns or groups called asterisms are not constellations per se but are used by observers to navigate the night sky. Examples of bright asterisms include the Pleiades and Hyades within the constellation Taurus or Venus' Mirror in the constellation of Orion.. Some asterisms, like the False Cross, are split between two constellations; the word "constellation" comes from the Late Latin term cōnstellātiō, which can be translated as "set of stars".
The Ancient Greek word for constellation is ἄστρον. A more modern astronomical sense of the term "constellation" is as a recognisable pattern of stars whose appearance is associated with mythological characters or creatures, or earthbound animals, or objects, it can specifically denote the recognized 88 named constellations used today. Colloquial usage does not draw a sharp distinction between "constellations" and smaller "asterisms", yet the modern accepted astronomical constellations employ such a distinction. E.g. the Pleiades and the Hyades are both asterisms, each lies within the boundaries of the constellation of Taurus. Another example is the northern asterism known as the Big Dipper or the Plough, composed of the seven brightest stars within the area of the IAU-defined constellation of Ursa Major; the southern False Cross asterism includes portions of the constellations Carina and Vela and the Summer Triangle.. A constellation, viewed from a particular latitude on Earth, that never sets below the horizon is termed circumpolar.
From the North Pole or South Pole, all constellations south or north of the celestial equator are circumpolar. Depending on the definition, equatorial constellations may include those that lie between declinations 45° north and 45° south, or those that pass through the declination range of the ecliptic or zodiac ranging between 23½° north, the celestial equator, 23½° south. Although stars in constellations appear near each other in the sky, they lie at a variety of distances away from the Earth. Since stars have their own independent motions, all constellations will change over time. After tens to hundreds of thousands of years, familiar outlines will become unrecognizable. Astronomers can predict the past or future constellation outlines by measuring individual stars' common proper motions or cpm by accurate astrometry and their radial velocities by astronomical spectroscopy; the earliest evidence for the humankind's identification of constellations comes from Mesopotamian inscribed stones and clay writing tablets that date back to 3000 BC.
It seems that the bulk of the Mesopotamian constellations were created within a short interval from around 1300 to 1000 BC. Mesopotamian constellations appeared in many of the classical Greek constellations; the oldest Babylonian star catalogues of stars and constellations date back to the beginning in the Middle Bronze Age, most notably the Three Stars Each texts and the MUL. APIN, an expanded and revised version based on more accurate observation from around 1000 BC. However, the numerous Sumerian names in these catalogues suggest that they built on older, but otherwise unattested, Sumerian traditions of the Early Bronze Age; the classical Zodiac is a revision of Neo-Babylonian constellations from the 6th century BC. The Greeks adopted the Babylonian constellations in the 4th century BC. Twenty Ptolemaic constellations are from the Ancient Near East. Another ten have the same stars but different names. Biblical scholar, E. W. Bullinger interpreted some of the creatures mentioned in the books of Ezekiel and Revelation as the middle signs of the four quarters of the Zodiac, with the Lion as Leo, the Bull as Taurus, the Man representing Aquarius and the Eagle standing in for Scorpio.
The biblical Book of Job also
The parsec is a unit of length used to measure large distances to astronomical objects outside the Solar System. A parsec is defined as the distance at which one astronomical unit subtends an angle of one arcsecond, which corresponds to 648000/π astronomical units. One parsec is equal to 31 trillion kilometres or 19 trillion miles; the nearest star, Proxima Centauri, is about 1.3 parsecs from the Sun. Most of the stars visible to the unaided eye in the night sky are within 500 parsecs of the Sun; the parsec unit was first suggested in 1913 by the British astronomer Herbert Hall Turner. Named as a portmanteau of the parallax of one arcsecond, it was defined to make calculations of astronomical distances from only their raw observational data quick and easy for astronomers. For this reason, it is the unit preferred in astronomy and astrophysics, though the light-year remains prominent in popular science texts and common usage. Although parsecs are used for the shorter distances within the Milky Way, multiples of parsecs are required for the larger scales in the universe, including kiloparsecs for the more distant objects within and around the Milky Way, megaparsecs for mid-distance galaxies, gigaparsecs for many quasars and the most distant galaxies.
In August 2015, the IAU passed Resolution B2, which, as part of the definition of a standardized absolute and apparent bolometric magnitude scale, mentioned an existing explicit definition of the parsec as 648000/π astronomical units, or 3.08567758149137×1016 metres. This corresponds to the small-angle definition of the parsec found in many contemporary astronomical references; the parsec is defined as being equal to the length of the longer leg of an elongated imaginary right triangle in space. The two dimensions on which this triangle is based are its shorter leg, of length one astronomical unit, the subtended angle of the vertex opposite that leg, measuring one arc second. Applying the rules of trigonometry to these two values, the unit length of the other leg of the triangle can be derived. One of the oldest methods used by astronomers to calculate the distance to a star is to record the difference in angle between two measurements of the position of the star in the sky; the first measurement is taken from the Earth on one side of the Sun, the second is taken half a year when the Earth is on the opposite side of the Sun.
The distance between the two positions of the Earth when the two measurements were taken is twice the distance between the Earth and the Sun. The difference in angle between the two measurements is twice the parallax angle, formed by lines from the Sun and Earth to the star at the distant vertex; the distance to the star could be calculated using trigonometry. The first successful published direct measurements of an object at interstellar distances were undertaken by German astronomer Friedrich Wilhelm Bessel in 1838, who used this approach to calculate the 3.5-parsec distance of 61 Cygni. The parallax of a star is defined as half of the angular distance that a star appears to move relative to the celestial sphere as Earth orbits the Sun. Equivalently, it is the subtended angle, from that star's perspective, of the semimajor axis of the Earth's orbit; the star, the Sun and the Earth form the corners of an imaginary right triangle in space: the right angle is the corner at the Sun, the corner at the star is the parallax angle.
The length of the opposite side to the parallax angle is the distance from the Earth to the Sun (defined as one astronomical unit, the length of the adjacent side gives the distance from the sun to the star. Therefore, given a measurement of the parallax angle, along with the rules of trigonometry, the distance from the Sun to the star can be found. A parsec is defined as the length of the side adjacent to the vertex occupied by a star whose parallax angle is one arcsecond; the use of the parsec as a unit of distance follows from Bessel's method, because the distance in parsecs can be computed as the reciprocal of the parallax angle in arcseconds. No trigonometric functions are required in this relationship because the small angles involved mean that the approximate solution of the skinny triangle can be applied. Though it may have been used before, the term parsec was first mentioned in an astronomical publication in 1913. Astronomer Royal Frank Watson Dyson expressed his concern for the need of a name for that unit of distance.
He proposed the name astron, but mentioned that Carl Charlier had suggested siriometer and Herbert Hall Turner had proposed parsec. It was Turner's proposal. In the diagram above, S represents the Sun, E the Earth at one point in its orbit, thus the distance ES is one astronomical unit. The angle SDE is one arcsecond so by definition D is a point in space at a distance of one parsec from the Sun. Through trigonometry, the distance SD is calculated as follows: S D = E S tan 1 ″ S D ≈ E S 1 ″ = 1 au 1 60 × 60 × π
A variable star is a star whose brightness as seen from Earth fluctuates. This variation may be caused by a change in emitted light or by something blocking the light, so variable stars are classified as either: Intrinsic variables, whose luminosity changes. Extrinsic variables, whose apparent changes in brightness are due to changes in the amount of their light that can reach Earth. Many most, stars have at least some variation in luminosity: the energy output of our Sun, for example, varies by about 0.1% over an 11-year solar cycle. An ancient Egyptian calendar of lucky and unlucky days composed some 3,200 years ago may be the oldest preserved historical document of the discovery of a variable star, the eclipsing binary Algol. Of the modern astronomers, the first variable star was identified in 1638 when Johannes Holwarda noticed that Omicron Ceti pulsated in a cycle taking 11 months; this discovery, combined with supernovae observed in 1572 and 1604, proved that the starry sky was not eternally invariable as Aristotle and other ancient philosophers had taught.
In this way, the discovery of variable stars contributed to the astronomical revolution of the sixteenth and early seventeenth centuries. The second variable star to be described was the eclipsing variable Algol, by Geminiano Montanari in 1669. Chi Cygni was identified in 1686 by G. Kirch R Hydrae in 1704 by G. D. Maraldi. By 1786 ten variable stars were known. John Goodricke himself discovered Beta Lyrae. Since 1850 the number of known variable stars has increased especially after 1890 when it became possible to identify variable stars by means of photography; the latest edition of the General Catalogue of Variable Stars lists more than 46,000 variable stars in the Milky Way, as well as 10,000 in other galaxies, over 10,000'suspected' variables. The most common kinds of variability involve changes in brightness, but other types of variability occur, in particular changes in the spectrum. By combining light curve data with observed spectral changes, astronomers are able to explain why a particular star is variable.
Variable stars are analysed using photometry, spectrophotometry and spectroscopy. Measurements of their changes in brightness can be plotted to produce light curves. For regular variables, the period of variation and its amplitude can be well established. Peak brightnesses in the light curve are known as maxima. Amateur astronomers can do useful scientific study of variable stars by visually comparing the star with other stars within the same telescopic field of view of which the magnitudes are known and constant. By estimating the variable's magnitude and noting the time of observation a visual lightcurve can be constructed; the American Association of Variable Star Observers collects such observations from participants around the world and shares the data with the scientific community. From the light curve the following data are derived: are the brightness variations periodical, irregular, or unique? What is the period of the brightness fluctuations? What is the shape of the light curve? From the spectrum the following data are derived: what kind of star is it: what is its temperature, its luminosity class? is it a single star, or a binary? does the spectrum change with time?
Changes in brightness may depend on the part of the spectrum, observed if the wavelengths of spectral lines are shifted this points to movements strong magnetic fields on the star betray themselves in the spectrum abnormal emission or absorption lines may be indication of a hot stellar atmosphere, or gas clouds surrounding the star. In few cases it is possible to make pictures of a stellar disk; these may show darker spots on its surface. Combining light curves with spectral data gives a clue as to the changes that occur in a variable star. For example, evidence for a pulsating star is found in its shifting spectrum because its surface periodically moves toward and away from us, with the same frequency as its changing brightness. About two-thirds of all variable stars appear to be pulsating. In the 1930s astronomer Arthur Stanley Eddington showed that the mathematical equations that describe the interior of a star may lead to instabilities that cause a star to pulsate; the most common type of instability is related to oscillations in the degree of ionization in outer, convective layers of the star.
Suppose the star is in the swelling phase. Its outer layers expand; because of the decreasing temperature the degree of ionization decreases. This makes the gas more transparent, thus makes it easier for the star to radiate its energy; this in turn will make the star start to contract. As the gas is thereby compressed, it is heated and the degree of ionization again increases. Thi