1.
900 AD
–
Year 900 was a leap year starting on Tuesday of the Julian calendar. Spring – Forces under the Transoxianian emir Ismail ibn Ahmad are victorious at Balkh over Amr ibn al-Layth, the Samanid Dynasty rules over Khorasan, as well as Transoxiana. A few months later, the Samanids conquer the Zaydid emirate of Tabaristan and this victory marks the beginning of the dispersion of the local Shiites, by the new Sunni power. Arab–Byzantine War, Emperor Leo VI begins an offensive against the Abbasid army in Cilicia, Mesopotamia and Armenia and he also continues the war against the Muslims in Sicily and southern Italy. The Fatmids break away from the Abbasid Caliphate and migrate to North Africa and they claim to be descendants from Fatima bint Muhammad, the daughter of the Islamic prophet Muhammad. The Qarmatians of Al-Bahrayn, under Abū-Saʿīd Jannābī, score a victory over the Abbasid army led by Al-Abbas ibn Amr al-Ghanawi. Spring – Atenulf I, Lombard prince of Capua, conquers the Duchy of Benevento and he deposes Duke Radelchis II and unites the two southern Lombard duchies in Mezzogiorno. The Byzantines offer an alliance to Atenulf who directs an campaign against the Saracens. They have establish themselves on the banks of the Garigliano River, february 4 – The 7-year-old Louis IV is at an assembly at Forchheim proclaimed king of the East Frankish Kingdom. Because of his age, the reins of government is entirely in the hands of others – the Frankish nobles. The most influential of Louiss councillors are Hatto I, archbishop of Mainz, june 8 – Edward the Elder is crowned king of England at Kingston upon Thames. June 17 – Baldwin II, Count of Flanders has Fulk the Venerable, bishop of Reims, june 29 – The Venetians repel the Magyar raiders at Rialto. Summer – After the death of his wife Zoe Zaoutzaina, the Byzantine emperor Leo VI marries Eudokia Baïana. August – Abdallah, son of the Aghlabid emir Ibrahim II, represses a revolt of his Muslim subjects, and then initiates a campaign against the last Byzantine strongholds in Sicily. August 13 – Zwentibold, king of Lotharingia, is killed in battle on the Meuse River, while fighting against his rebellious subjects, october 12 – Following Magyars raids in Lombardy, king Louis III is called to Italy by the grandees. He takes Pavia, forcing king Berengar I to flee, King Donald II is killed after a 11-year reign. He is succeeded by his cousin Constantine II as king of Scotland, docibilis I of Gaeta and his Saracen mercenaries attack Capua, in vain. After the rejection of their proposal by the Bavarians, the Hungarians attack this country, occupying Pannonia and parts of Ostmark
2.
Integer
–
An integer is a number that can be written without a fractional component. For example,21,4,0, and −2048 are integers, while 9.75, 5 1⁄2, the set of integers consists of zero, the positive natural numbers, also called whole numbers or counting numbers, and their additive inverses. This is often denoted by a boldface Z or blackboard bold Z standing for the German word Zahlen, ℤ is a subset of the sets of rational and real numbers and, like the natural numbers, is countably infinite. The integers form the smallest group and the smallest ring containing the natural numbers, in algebraic number theory, the integers are sometimes called rational integers to distinguish them from the more general algebraic integers. In fact, the integers are the integers that are also rational numbers. Like the natural numbers, Z is closed under the operations of addition and multiplication, that is, however, with the inclusion of the negative natural numbers, and, importantly,0, Z is also closed under subtraction. The integers form a ring which is the most basic one, in the following sense, for any unital ring. This universal property, namely to be an object in the category of rings. Z is not closed under division, since the quotient of two integers, need not be an integer, although the natural numbers are closed under exponentiation, the integers are not. The following lists some of the properties of addition and multiplication for any integers a, b and c. In the language of algebra, the first five properties listed above for addition say that Z under addition is an abelian group. As a group under addition, Z is a cyclic group, in fact, Z under addition is the only infinite cyclic group, in the sense that any infinite cyclic group is isomorphic to Z. The first four properties listed above for multiplication say that Z under multiplication is a commutative monoid. However, not every integer has an inverse, e. g. there is no integer x such that 2x =1, because the left hand side is even. This means that Z under multiplication is not a group, all the rules from the above property table, except for the last, taken together say that Z together with addition and multiplication is a commutative ring with unity. It is the prototype of all objects of algebraic structure. Only those equalities of expressions are true in Z for all values of variables, note that certain non-zero integers map to zero in certain rings. The lack of zero-divisors in the means that the commutative ring Z is an integral domain
3.
Negative number
–
In mathematics, a negative number is a real number that is less than zero. If positive represents movement to the right, negative represents movement to the left, if positive represents above sea level, then negative represents below level. If positive represents a deposit, negative represents a withdrawal and they are often used to represent the magnitude of a loss or deficiency. A debt that is owed may be thought of as a negative asset, if a quantity may have either of two opposite senses, then one may choose to distinguish between those senses—perhaps arbitrarily—as positive and negative. In the medical context of fighting a tumor, an expansion could be thought of as a negative shrinkage, negative numbers are used to describe values on a scale that goes below zero, such as the Celsius and Fahrenheit scales for temperature. The laws of arithmetic for negative numbers ensure that the common idea of an opposite is reflected in arithmetic. For example, − −3 =3 because the opposite of an opposite is the original thing, negative numbers are usually written with a minus sign in front. For example, −3 represents a quantity with a magnitude of three, and is pronounced minus three or negative three. To help tell the difference between a subtraction operation and a number, occasionally the negative sign is placed slightly higher than the minus sign. Conversely, a number that is greater than zero is called positive, the positivity of a number may be emphasized by placing a plus sign before it, e. g. +3. In general, the negativity or positivity of a number is referred to as its sign, every real number other than zero is either positive or negative. The positive whole numbers are referred to as natural numbers, while the positive and negative numbers are referred to as integers. In bookkeeping, amounts owed are often represented by red numbers, or a number in parentheses, Liu Hui established rules for adding and subtracting negative numbers. By the 7th century, Indian mathematicians such as Brahmagupta were describing the use of negative numbers, islamic mathematicians further developed the rules of subtracting and multiplying negative numbers and solved problems with negative coefficients. Western mathematicians accepted the idea of numbers by the 17th century. Prior to the concept of numbers, mathematicians such as Diophantus considered negative solutions to problems false. Negative numbers can be thought of as resulting from the subtraction of a number from a smaller. For example, negative three is the result of subtracting three from zero,0 −3 = −3, in general, the subtraction of a larger number from a smaller yields a negative result, with the magnitude of the result being the difference between the two numbers
4.
100 (number)
–
100 or one hundred is the natural number following 99 and preceding 101. In medieval contexts, it may be described as the hundred or five score in order to differentiate the English. The standard SI prefix for a hundred is hecto-,100 is the basis of percentages, with 100% being a full amount. 100 is the sum of the first nine prime numbers, as well as the sum of pairs of prime numbers e. g.3 +97,11 +89,17 +83,29 +71,41 +59. 100 is the sum of the cubes of the first four integers and this is related by Nicomachuss theorem to the fact that 100 also equals the square of the sum of the first four integers,100 =102 =2. 26 +62 =100, thus 100 is a Leyland number and it is divisible by the number of primes below it,25 in this case. It can not be expressed as the difference between any integer and the total of coprimes below it, making it a noncototient and it can be expressed as a sum of some of its divisors, making it a semiperfect number. 100 is a Harshad number in base 10, and also in base 4, there are exactly 100 prime numbers whose digits are in strictly ascending order. 100 is the smallest number whose common logarithm is a prime number,100 senators are in the U. S One hundred is the atomic number of fermium, an actinide. On the Celsius scale,100 degrees is the temperature of pure water at sea level. The Kármán line lies at an altitude of 100 kilometres above the Earths sea level and is used to define the boundary between Earths atmosphere and outer space. There are 100 blasts of the Shofar heard in the service of Rosh Hashana, a religious Jew is expected to utter at least 100 blessings daily. In Hindu Religion - Mythology Book Mahabharata - Dhritarashtra had 100 sons known as kauravas, the United States Senate has 100 Senators. Most of the currencies are divided into 100 subunits, for example, one euro is one hundred cents. The 100 Euro banknotes feature a picture of a Rococo gateway on the obverse, the U. S. hundred-dollar bill has Benjamin Franklins portrait, the Benjamin is the largest U. S. bill in print. American savings bonds of $100 have Thomas Jeffersons portrait, while American $100 treasury bonds have Andrew Jacksons portrait, One hundred is also, The number of years in a century. The number of pounds in an American short hundredweight, in Greece, India, Israel and Nepal,100 is the police telephone number. In Belgium,100 is the ambulance and firefighter telephone number, in United Kingdom,100 is the operator telephone number
5.
Factorization
–
In mathematics, factorization or factoring is the decomposition of an object into a product of other objects, or factors, which when multiplied together give the original. For example, the number 15 factors into primes as 3 ×5, in all cases, a product of simpler objects is obtained. The aim of factoring is usually to reduce something to “basic building blocks”, such as numbers to prime numbers, factoring integers is covered by the fundamental theorem of arithmetic and factoring polynomials by the fundamental theorem of algebra. Viètes formulas relate the coefficients of a polynomial to its roots, the opposite of polynomial factorization is expansion, the multiplying together of polynomial factors to an “expanded” polynomial, written as just a sum of terms. Integer factorization for large integers appears to be a difficult problem, there is no known method to carry it out quickly. Its complexity is the basis of the security of some public key cryptography algorithms. A matrix can also be factorized into a product of matrices of special types, One major example of this uses an orthogonal or unitary matrix, and a triangular matrix. There are different types, QR decomposition, LQ, QL, RQ and this situation is generalized by factorization systems. By the fundamental theorem of arithmetic, every integer greater than 1 has a unique prime factorization. Given an algorithm for integer factorization, one can factor any integer down to its constituent primes by repeated application of this algorithm, for very large numbers, no efficient classical algorithm is known. Modern techniques for factoring polynomials are fast and efficient, but use sophisticated mathematical ideas and these techniques are used in the construction of computer routines for carrying out polynomial factorization in Computer algebra systems. This article is concerned with classical techniques. While the general notion of factoring just means writing an expression as a product of simpler expressions, when factoring polynomials this means that the factors are to be polynomials of smaller degree. Thus, while x 2 − y = is a factorization of the expression, another issue concerns the coefficients of the factors. It is not always possible to do this, and a polynomial that can not be factored in this way is said to be irreducible over this type of coefficient, thus, x2 -2 is irreducible over the integers and x2 +4 is irreducible over the reals. In the first example, the integers 1 and -2 can also be thought of as real numbers, and if they are, then x 2 −2 = shows that this polynomial factors over the reals. Similarly, since the integers 1 and 4 can be thought of as real and hence complex numbers, x2 +4 splits over the complex numbers, i. e. x 2 +4 =. The fundamental theorem of algebra can be stated as, Every polynomial of n with complex number coefficients splits completely into n linear factors
6.
Divisor
–
In mathematics, a divisor of an integer n, also called a factor of n, is an integer m that may be multiplied by some other integer to produce n. In this case one says also that n is a multiple of m, an integer n is divisible by another integer m if m is a divisor of n, this implies dividing n by m leaves no remainder. Under this definition, the statement m ∣0 holds for every m, as before, but with the additional constraint k ≠0. Under this definition, the statement m ∣0 does not hold for m ≠0, in the remainder of this article, which definition is applied is indicated where this is significant. Divisors can be negative as well as positive, although sometimes the term is restricted to positive divisors. For example, there are six divisors of 4, they are 1,2,4, −1, −2, and −4,1 and −1 divide every integer. Every integer is a divisor of itself, every integer is a divisor of 0. Integers divisible by 2 are called even, and numbers not divisible by 2 are called odd,1, −1, n and −n are known as the trivial divisors of n. A divisor of n that is not a divisor is known as a non-trivial divisor. A non-zero integer with at least one divisor is known as a composite number, while the units −1 and 1. There are divisibility rules which allow one to recognize certain divisors of a number from the numbers digits, the generalization can be said to be the concept of divisibility in any integral domain. 7 is a divisor of 42 because 7 ×6 =42 and it can also be said that 42 is divisible by 7,42 is a multiple of 7,7 divides 42, or 7 is a factor of 42. The non-trivial divisors of 6 are 2, −2,3, the positive divisors of 42 are 1,2,3,6,7,14,21,42. 5 ∣0, because 5 ×0 =0, if a ∣ b and b ∣ a, then a = b or a = − b. If a ∣ b and a ∣ c, then a ∣ holds, however, if a ∣ b and c ∣ b, then ∣ b does not always hold. If a ∣ b c, and gcd =1, then a ∣ c, if p is a prime number and p ∣ a b then p ∣ a or p ∣ b. A positive divisor of n which is different from n is called a proper divisor or a part of n. A number that does not evenly divide n but leaves a remainder is called an aliquant part of n, an integer n >1 whose only proper divisor is 1 is called a prime number
7.
Greek numerals
–
Greek numerals are a system of writing numbers using the letters of the Greek alphabet. These alphabetic numerals are known as Ionic or Ionian numerals, Milesian numerals. In modern Greece, they are used for ordinal numbers. For ordinary cardinal numbers, however, Greece uses Arabic numerals, attic numerals, which were later adopted as the basis for Roman numerals, were the first alphabetic set. They were acrophonic, derived from the first letters of the names of the numbers represented and they ran =1, =5, =10, =100, =1000, and =10000. 50,500,5000, and 50000 were represented by the letter with minuscule powers of ten written in the top right corner, the same system was used outside of Attica, but the symbols varied with the local alphabets, in Boeotia, was 1000. The present system probably developed around Miletus in Ionia, 19th-century classicists placed its development in the 3rd century BC, the occasion of its first widespread use. The present system uses the 24 letters adopted by Euclid as well as three Phoenician and Ionic ones that were not carried over, digamma, koppa, and sampi. The position of characters within the numbering system imply that the first two were still in use while the third was not. Greek numerals are decimal, based on powers of 10, the units from 1 to 9 are assigned to the first nine letters of the old Ionic alphabet from alpha to theta. Each multiple of one hundred from 100 to 900 was then assigned its own separate letter as well and this alphabetic system operates on the additive principle in which the numeric values of the letters are added together to obtain the total. For example,241 was represented as, in ancient and medieval manuscripts, these numerals were eventually distinguished from letters using overbars, α, β, γ, etc. In medieval manuscripts of the Book of Revelation, the number of the Beast 666 is written as χξϛ, although the Greek alphabet began with only majuscule forms, surviving papyrus manuscripts from Egypt show that uncial and cursive minuscule forms began early. These new letter forms sometimes replaced the ones, especially in the case of the obscure numerals. The old Q-shaped koppa began to be broken up and simplified, the numeral for 6 changed several times. During antiquity, the letter form of digamma came to be avoided in favor of a special numerical one. By the Byzantine era, the letter was known as episemon and this eventually merged with the sigma-tau ligature stigma. In modern Greek, a number of changes have been made
8.
Roman numerals
–
The numeric system represented by Roman numerals originated in ancient Rome and remained the usual way of writing numbers throughout Europe well into the Late Middle Ages. Numbers in this system are represented by combinations of letters from the Latin alphabet, Roman numerals, as used today, are based on seven symbols, The use of Roman numerals continued long after the decline of the Roman Empire. The numbers 1 to 10 are usually expressed in Roman numerals as follows, I, II, III, IV, V, VI, VII, VIII, IX, Numbers are formed by combining symbols and adding the values, so II is two and XIII is thirteen. Symbols are placed left to right in order of value. Named after the year of its release,2014 as MMXIV, the year of the games of the XXII Olympic Winter Games The standard forms described above reflect typical modern usage rather than a universally accepted convention. Usage in ancient Rome varied greatly and remained inconsistent in medieval, Roman inscriptions, especially in official contexts, seem to show a preference for additive forms such as IIII and VIIII instead of subtractive forms such as IV and IX. Both methods appear in documents from the Roman era, even within the same document, double subtractives also occur, such as XIIX or even IIXX instead of XVIII. Sometimes V and L are not used, with such as IIIIII. Such variation and inconsistency continued through the period and into modern times. Clock faces that use Roman numerals normally show IIII for four o’clock but IX for nine o’clock, however, this is far from universal, for example, the clock on the Palace of Westminster in London uses IV. Similarly, at the beginning of the 20th century, different representations of 900 appeared in several inscribed dates. For instance,1910 is shown on Admiralty Arch, London, as MDCCCCX rather than MCMX, although Roman numerals came to be written with letters of the Roman alphabet, they were originally independent symbols. The Etruscans, for example, used
9.
Unicode
–
Unicode is a computing industry standard for the consistent encoding, representation, and handling of text expressed in most of the worlds writing systems. As of June 2016, the most recent version is Unicode 9.0, the standard is maintained by the Unicode Consortium. Unicodes success at unifying character sets has led to its widespread, the standard has been implemented in many recent technologies, including modern operating systems, XML, Java, and the. NET Framework. Unicode can be implemented by different character encodings, the most commonly used encodings are UTF-8, UTF-16 and the now-obsolete UCS-2. UTF-8 uses one byte for any ASCII character, all of which have the same values in both UTF-8 and ASCII encoding, and up to four bytes for other characters. UCS-2 uses a 16-bit code unit for each character but cannot encode every character in the current Unicode standard, UTF-16 extends UCS-2, using one 16-bit unit for the characters that were representable in UCS-2 and two 16-bit units to handle each of the additional characters. Many traditional character encodings share a common problem in that they allow bilingual computer processing, Unicode, in intent, encodes the underlying characters—graphemes and grapheme-like units—rather than the variant glyphs for such characters. In the case of Chinese characters, this leads to controversies over distinguishing the underlying character from its variant glyphs. In text processing, Unicode takes the role of providing a unique code point—a number, in other words, Unicode represents a character in an abstract way and leaves the visual rendering to other software, such as a web browser or word processor. This simple aim becomes complicated, however, because of concessions made by Unicodes designers in the hope of encouraging a more rapid adoption of Unicode, the first 256 code points were made identical to the content of ISO-8859-1 so as to make it trivial to convert existing western text. For other examples, see duplicate characters in Unicode and he explained that he name Unicode is intended to suggest a unique, unified, universal encoding. In this document, entitled Unicode 88, Becker outlined a 16-bit character model, Unicode could be roughly described as wide-body ASCII that has been stretched to 16 bits to encompass the characters of all the worlds living languages. In a properly engineered design,16 bits per character are more than sufficient for this purpose, Unicode aims in the first instance at the characters published in modern text, whose number is undoubtedly far below 214 =16,384. By the end of 1990, most of the work on mapping existing character encoding standards had been completed, the Unicode Consortium was incorporated in California on January 3,1991, and in October 1991, the first volume of the Unicode standard was published. The second volume, covering Han ideographs, was published in June 1992, in 1996, a surrogate character mechanism was implemented in Unicode 2.0, so that Unicode was no longer restricted to 16 bits. The Microsoft TrueType specification version 1.0 from 1992 used the name Apple Unicode instead of Unicode for the Platform ID in the naming table, Unicode defines a codespace of 1,114,112 code points in the range 0hex to 10FFFFhex. Normally a Unicode code point is referred to by writing U+ followed by its hexadecimal number, for code points in the Basic Multilingual Plane, four digits are used, for code points outside the BMP, five or six digits are used, as required. Code points in Planes 1 through 16 are accessed as surrogate pairs in UTF-16, within each plane, characters are allocated within named blocks of related characters
10.
Binary number
–
The base-2 system is a positional notation with a radix of 2. Because of its implementation in digital electronic circuitry using logic gates. Each digit is referred to as a bit, the modern binary number system was devised by Gottfried Leibniz in 1679 and appears in his article Explication de lArithmétique Binaire. Systems related to binary numbers have appeared earlier in multiple cultures including ancient Egypt, China, Leibniz was specifically inspired by the Chinese I Ching. The scribes of ancient Egypt used two different systems for their fractions, Egyptian fractions and Horus-Eye fractions, the method used for ancient Egyptian multiplication is also closely related to binary numbers. This method can be seen in use, for instance, in the Rhind Mathematical Papyrus, the I Ching dates from the 9th century BC in China. The binary notation in the I Ching is used to interpret its quaternary divination technique and it is based on taoistic duality of yin and yang. Eight trigrams and a set of 64 hexagrams, analogous to the three-bit and six-bit binary numerals, were in use at least as early as the Zhou Dynasty of ancient China. The Song Dynasty scholar Shao Yong rearranged the hexagrams in a format that resembles modern binary numbers, the Indian scholar Pingala developed a binary system for describing prosody. He used binary numbers in the form of short and long syllables, Pingalas Hindu classic titled Chandaḥśāstra describes the formation of a matrix in order to give a unique value to each meter. The binary representations in Pingalas system increases towards the right, the residents of the island of Mangareva in French Polynesia were using a hybrid binary-decimal system before 1450. Slit drums with binary tones are used to encode messages across Africa, sets of binary combinations similar to the I Ching have also been used in traditional African divination systems such as Ifá as well as in medieval Western geomancy. The base-2 system utilized in geomancy had long been applied in sub-Saharan Africa. Leibnizs system uses 0 and 1, like the modern binary numeral system, Leibniz was first introduced to the I Ching through his contact with the French Jesuit Joachim Bouvet, who visited China in 1685 as a missionary. Leibniz saw the I Ching hexagrams as an affirmation of the universality of his own beliefs as a Christian. Binary numerals were central to Leibnizs theology and he believed that binary numbers were symbolic of the Christian idea of creatio ex nihilo or creation out of nothing. Is not easy to impart to the pagans, is the ex nihilo through Gods almighty power. In 1854, British mathematician George Boole published a paper detailing an algebraic system of logic that would become known as Boolean algebra
11.
Ternary numeral system
–
The ternary numeral system has three as its base. Analogous to a bit, a digit is a trit. One trit is equivalent to bits of information. Representations of integer numbers in ternary do not get uncomfortably lengthy as quickly as in binary, for example, decimal 365 corresponds to binary 101101101 and to ternary 111112. However, they are far less compact than the corresponding representations in bases such as decimal – see below for a compact way to codify ternary using nonary. The value of a number with n bits that are all 1 is 2n −1. Then N = M, N = /, and N = bd −1, for a three-digit ternary number, N =33 −1 =26 =2 ×32 +2 ×31 +2 ×30 =18 +6 +2. Nonary or septemvigesimal can be used for representation of ternary. A base-three system is used in Islam to keep track of counting Tasbih to 99 or to 100 on a hand for counting prayers. In certain analog logic, the state of the circuit is often expressed ternary and this is most commonly seen in Transistor–transistor logic using 7406 open collector logic. The output is said to either be low, high, or open, in this configuration the output of the circuit is actually not connected to any voltage reference at all. Where the signal is usually grounded to a reference, or at a certain voltage level. Thus, the voltage level is sometimes unpredictable. A rare ternary point is used to denote fractional parts of an inning in baseball, since each inning consists of three outs, each out is considered one third of an inning and is denoted as.1. For example, if a player pitched all of the 4th, 5th and 6th innings, plus 2 outs of the 7th inning, his Innings pitched column for that game would be listed as 3.2, meaning 3⅔. In this usage, only the part of the number is written in ternary form. Ternary numbers can be used to convey self-similar structures like the Sierpinski triangle or the Cantor set conveniently, additionally, it turns out that the ternary representation is useful for defining the Cantor set and related point sets, because of the way the Cantor set is constructed. The Cantor set consists of the points from 0 to 1 that have an expression that does not contain any instance of the digit 1
12.
Quaternary numeral system
–
Quaternary is the base-4 numeral system. It uses the digits 0,1,2 and 3 to represent any real number. Four is the largest number within the range and one of two numbers that is both a square and a highly composite number, making quaternary a convenient choice for a base at this scale. Despite being twice as large, its economy is equal to that of binary. However, it no better in the localization of prime numbers. See decimal and binary for a discussion of these properties, as with the octal and hexadecimal numeral systems, quaternary has a special relation to the binary numeral system. Each radix 4,8 and 16 is a power of 2, so the conversion to and from binary is implemented by matching each digit with 2,3 or 4 binary digits, for example, in base 4,302104 =11001001002. Although octal and hexadecimal are widely used in computing and computer programming in the discussion and analysis of binary arithmetic and logic, by analogy with byte and nybble, a quaternary digit is sometimes called a crumb. There is a surviving list of Ventureño language number words up to 32 written down by a Spanish priest ca, the Kharosthi numerals have a partial base 4 counting system from 1 to decimal 10. Quaternary numbers are used in the representation of 2D Hilbert curves, here a real number between 0 and 1 is converted into the quaternary system. Every single digit now indicates in which of the respective 4 sub-quadrants the number will be projected, parallels can be drawn between quaternary numerals and the way genetic code is represented by DNA. The four DNA nucleotides in order, abbreviated A, C, G and T, can be taken to represent the quaternary digits in numerical order 0,1,2. With this encoding, the complementary digit pairs 0↔3, and 1↔2 match the complementation of the pairs, A↔T and C↔G. For example, the nucleotide sequence GATTACA can be represented by the quaternary number 2033010, quaternary line codes have been used for transmission, from the invention of the telegraph to the 2B1Q code used in modern ISDN circuits
13.
Quinary
–
Quinary is a numeral system with five as the base. A possible origination of a system is that there are five fingers on either hand. The base five is stated from 0–4, in the quinary place system, five numerals, from 0 to 4, are used to represent any real number. According to this method, five is written as 10, twenty-five is written as 100, today, the main usage of base 5 is as a biquinary system, which is decimal using five as a sub-base. Another example of a system, is sexagesimal, base 60. Each quinary digit has log25 bits of information, many languages use quinary number systems, including Gumatj, Nunggubuyu, Kuurn Kopan Noot, Luiseño and Saraveca. Gumatj is a true 5–25 language, in which 25 is the group of 5. The Gumatj numerals are shown below, In the video game Riven and subsequent games of the Myst franchise, a decimal system with 2 and 5 as a sub-bases is called biquinary, and is found in Wolof and Khmer. Roman numerals are a biquinary system, the numbers 1,5,10, and 50 are written as I, V, X, and L respectively. Eight is VIII and seventy is LXX, most versions of the abacus use a biquinary system to simulate a decimal system for ease of calculation. Urnfield culture numerals and some tally mark systems are also biquinary, units of currencies are commonly partially or wholly biquinary. A vigesimal system with 4 and 5 as a sub-bases is found in Nahuatl, pentimal system Quibinary Yan Tan Tethera References, Quinary Base Conversion, includes fractional part, from Math Is Fun Media related to Quinary numeral system at Wikimedia Commons
14.
Senary
–
The senary numeral system has six as its base. It has been adopted independently by a number of cultures. Like decimal, it is a semiprime, though being the product of the two consecutive numbers that are both prime it has a high degree of mathematical properties for its size. As six is a highly composite number, many of the arguments made in favor of the duodecimal system also apply to this base-6. Senary may be considered interesting in the study of numbers, since all primes other than 2 and 3. That is, for every number p greater than 3, one has the modular arithmetic relations that either p ≡1 or 5. This property maximizes the probability that the result of an integer multiplication will end in zero, E. g. if three fingers are extended on the left hand and four on the right, 34senary is represented. This is equivalent to 3 ×6 +4 which is 22decimal, flipping the sixes hand around to its backside may help to further disambiguate which hand represents the sixes and which represents the units. While most developed cultures count by fingers up to 5 in very similar ways, beyond 5 non-Western cultures deviate from Western methods, such as with Chinese number gestures. More abstract finger counting systems, such as chisanbop or finger binary, allow counting to 99,1,023, or even higher depending on the method. The English monk and historian Bede, in the first chapter of De temporum ratione, titled Tractatus de computo, vel loquela per gestum digitorum, the Ndom language of Papua New Guinea is reported to have senary numerals. Mer means 6, mer an thef means 6 ×2 =12, nif means 36, another example from Papua New Guinea are the Morehead-Maro languages. In these languages, counting is connected to ritualized yam-counting and these languages count from a base six, employing words for the powers of six, running up to 66 for some of the languages. One example is Kómnzo with the numerals, nimbo, féta, tarumba, ntamno, wärämäkä. Some Niger-Congo languages have been reported to use a number system, usually in addition to another. For some purposes, base 6 might be too small a base for convenience. The choice of 36 as a radix is convenient in that the digits can be represented using the Arabic numerals 0–9 and the Latin letters A–Z, this choice is the basis of the base36 encoding scheme. Base36 encoding scheme Binary Ternary Duodecimal Sexagesimal Shacks Base Six Dialectic Digital base 6 clock Analog Clock Designer capable of rendering a base 6 clock Senary base conversion
15.
Octal
–
The octal numeral system, or oct for short, is the base-8 number system, and uses the digits 0 to 7. Octal numerals can be made from binary numerals by grouping binary digits into groups of three. For example, the representation for decimal 74 is 1001010. Two zeroes can be added at the left,1001010, corresponding the octal digits 112, in the decimal system each decimal place is a power of ten. For example,7410 =7 ×101 +4 ×100 In the octal system each place is a power of eight. The Yuki language in California and the Pamean languages in Mexico have octal systems because the speakers count using the spaces between their fingers rather than the fingers themselves and it has been suggested that the reconstructed Proto-Indo-European word for nine might be related to the PIE word for new. Based on this, some have speculated that proto-Indo-Europeans used a number system. In 1716 King Charles XII of Sweden asked Emanuel Swedenborg to elaborate a number based on 64 instead of 10. Swedenborg however argued that for people with less intelligence than the king such a big base would be too difficult, in 1718 Swedenborg wrote a manuscript, En ny rekenkonst som om vexlas wid Thalet 8 i stelle then wanliga wid Thalet 10. The numbers 1-7 are there denoted by the l, s, n, m, t, f, u. Thus 8 = lo,16 = so,24 = no,64 = loo,512 = looo etc, numbers with consecutive consonants are pronounced with vowel sounds between in accordance with a special rule. Writing under the pseudonym Hirossa Ap-Iccim in The Gentlemans Magazine, July 1745, Hugh Jones proposed a system for British coins, weights. In 1801, James Anderson criticized the French for basing the Metric system on decimal arithmetic and he suggested base 8 for which he coined the term octal. In the mid 19th century, Alfred B. Taylor concluded that Our octonary radix is, therefore, so, for example, the number 65 would be spoken in octonary as under-un. Taylor also republished some of Swedenborgs work on octonary as an appendix to the above-cited publications, in the 2009 film Avatar, the language of the extraterrestrial Navi race employs an octal numeral system, probably due to the fact that they have four fingers on each hand. In the TV series Stargate SG-1, the Ancients, a race of beings responsible for the invention of the Stargates, in the tabletop game series Warhammer 40,000, the Tau race use an octal number system. Octal became widely used in computing systems such as the PDP-8, ICL1900. Octal was an abbreviation of binary for these machines because their word size is divisible by three
16.
Duodecimal
–
The duodecimal system is a positional notation numeral system using twelve as its base. In this system, the number ten may be written by a rotated 2 and this notation was introduced by Sir Isaac Pitman. These digit forms are available as Unicode characters on computerized systems since June 2015 as ↊ and ↋, other notations use A, T, or X for ten and B or E for eleven. The number twelve is written as 10 in duodecimal, whereas the digit string 12 means 1 dozen and 2 units. Similarly, in duodecimal 100 means 1 gross,1000 means 1 great gross, the number twelve, a superior highly composite number, is the smallest number with four non-trivial factors, and the smallest to include as factors all four numbers within the subitizing range. As a result, duodecimal has been described as the number system. Of its factors,2 and 3 are prime, which means the reciprocals of all 3-smooth numbers have a representation in duodecimal. In particular, the five most elementary fractions all have a terminating representation in duodecimal. This all makes it a convenient number system for computing fractions than most other number systems in common use, such as the decimal, vigesimal, binary. Although the trigesimal and sexagesimal systems do even better in respect, this is at the cost of unwieldy multiplication tables. In this section, numerals are based on decimal places, for example,10 means ten,12 means twelve. Languages using duodecimal number systems are uncommon, germanic languages have special words for 11 and 12, such as eleven and twelve in English. However, they are considered to come from Proto-Germanic *ainlif and *twalif, historically, units of time in many civilizations are duodecimal. There are twelve signs of the zodiac, twelve months in a year, traditional Chinese calendars, clocks, and compasses are based on the twelve Earthly Branches. There are 12 inches in a foot,12 troy ounces in a troy pound,12 old British pence in a shilling,24 hours in a day. The Romans used a system based on 12, including the uncia which became both the English words ounce and inch. The importance of 12 has been attributed to the number of cycles in a year. It is possible to count to 12 with the acting as a pointer
17.
Hexadecimal
–
In mathematics and computing, hexadecimal is a positional numeral system with a radix, or base, of 16. It uses sixteen distinct symbols, most often the symbols 0–9 to represent values zero to nine, Hexadecimal numerals are widely used by computer system designers and programmers. As each hexadecimal digit represents four binary digits, it allows a more human-friendly representation of binary-coded values, one hexadecimal digit represents a nibble, which is half of an octet or byte. For example, a byte can have values ranging from 00000000 to 11111111 in binary form. In a non-programming context, a subscript is typically used to give the radix, several notations are used to support hexadecimal representation of constants in programming languages, usually involving a prefix or suffix. The prefix 0x is used in C and related languages, where this value might be denoted as 0x2AF3, in contexts where the base is not clear, hexadecimal numbers can be ambiguous and confused with numbers expressed in other bases. There are several conventions for expressing values unambiguously, a numerical subscript can give the base explicitly,15910 is decimal 159,15916 is hexadecimal 159, which is equal to 34510. Some authors prefer a text subscript, such as 159decimal and 159hex, or 159d and 159h. example. com/name%20with%20spaces where %20 is the space character, thus ’, represents the right single quotation mark, Unicode code point number 2019 in hex,8217. In the Unicode standard, a value is represented with U+ followed by the hex value. Color references in HTML, CSS and X Window can be expressed with six hexadecimal digits prefixed with #, white, CSS allows 3-hexdigit abbreviations with one hexdigit per component, #FA3 abbreviates #FFAA33. *nix shells, AT&T assembly language and likewise the C programming language, to output an integer as hexadecimal with the printf function family, the format conversion code %X or %x is used. In Intel-derived assembly languages and Modula-2, hexadecimal is denoted with a suffixed H or h, some assembly languages use the notation HABCD. Ada and VHDL enclose hexadecimal numerals in based numeric quotes, 16#5A3#, for bit vector constants VHDL uses the notation x5A3. Verilog represents hexadecimal constants in the form 8hFF, where 8 is the number of bits in the value, the Smalltalk language uses the prefix 16r, 16r5A3 PostScript and the Bourne shell and its derivatives denote hex with prefix 16#, 16#5A3. For PostScript, binary data can be expressed as unprefixed consecutive hexadecimal pairs, in early systems when a Macintosh crashed, one or two lines of hexadecimal code would be displayed under the Sad Mac to tell the user what went wrong. Common Lisp uses the prefixes #x and #16r, setting the variables *read-base* and *print-base* to 16 can also used to switch the reader and printer of a Common Lisp system to Hexadecimal number representation for reading and printing numbers. Thus Hexadecimal numbers can be represented without the #x or #16r prefix code, MSX BASIC, QuickBASIC, FreeBASIC and Visual Basic prefix hexadecimal numbers with &H, &H5A3 BBC BASIC and Locomotive BASIC use & for hex. TI-89 and 92 series uses a 0h prefix, 0h5A3 ALGOL68 uses the prefix 16r to denote hexadecimal numbers, binary, quaternary and octal numbers can be specified similarly
18.
Vigesimal
–
The vigesimal or base 20 numeral system is based on twenty. In a vigesimal system, twenty individual numerals are used. One modern method of finding the extra needed symbols is to write ten as the letter A20, to write nineteen as J20, and this is similar to the common computer-science practice of writing hexadecimal numerals over 9 with the letters A–F. Another method skips over the letter I, in order to avoid confusion between I20 as eighteen and one, so that the number eighteen is written as J20, the number twenty is written as 1020. According to this notation,2020 means forty in decimal = + D020 means two hundred and sixty in decimal = +10020 means four hundred in decimal = + +, in the rest of this article below, numbers are expressed in decimal notation, unless specified otherwise. For example,10 means ten,20 means twenty, in decimal, dividing by three twice only gives one digit periods because 9 is the number below ten. 21, however, the adjacent to 20 that is divisible by 3, is not divisible by 9. Ninths in vigesimal have six-digit periods, the prime factorization of twenty is 22 ×5, so it is not a perfect power. However, its part,5, is congruent to 1. Thus, according to Artins conjecture on primitive roots, vigesimal has infinitely many cyclic primes, but the fraction of primes that are cyclic is not necessarily ~37. 395%. An UnrealScript program that computes the lengths of recurring periods of various fractions in a set of bases found that, of the first 15,456 primes. In many European languages,20 is used as a base, vigesimal systems are common in Africa, for example in Yoruba. Ogún,20, is the basic numeric block, ogójì,40, =20 multiplied by 2. Ogota,60, =20 multiplied by 3, ogorin,80, =20 multiplied by 4. Ogorun,100, =20 multiplied by 5, twenty was a base in the Maya and Aztec number systems. The Maya used the names for the powers of twenty, kal, bak, pic, calab, kinchil. See also Maya numerals and Maya calendar, Mayan languages, Yucatec, the Aztec called them, cempoalli, centzontli, cenxiquipilli, cempoalxiquipilli, centzonxiquipilli and cempoaltzonxiquipilli. Note that the ce prefix at the beginning means one and is replaced with the number to get the names of other multiples of the power
19.
Base 36
–
The senary numeral system has six as its base. It has been adopted independently by a number of cultures. Like decimal, it is a semiprime, though being the product of the two consecutive numbers that are both prime it has a high degree of mathematical properties for its size. As six is a highly composite number, many of the arguments made in favor of the duodecimal system also apply to this base-6. Senary may be considered interesting in the study of numbers, since all primes other than 2 and 3. That is, for every number p greater than 3, one has the modular arithmetic relations that either p ≡1 or 5. This property maximizes the probability that the result of an integer multiplication will end in zero, E. g. if three fingers are extended on the left hand and four on the right, 34senary is represented. This is equivalent to 3 ×6 +4 which is 22decimal, flipping the sixes hand around to its backside may help to further disambiguate which hand represents the sixes and which represents the units. While most developed cultures count by fingers up to 5 in very similar ways, beyond 5 non-Western cultures deviate from Western methods, such as with Chinese number gestures. More abstract finger counting systems, such as chisanbop or finger binary, allow counting to 99,1,023, or even higher depending on the method. The English monk and historian Bede, in the first chapter of De temporum ratione, titled Tractatus de computo, vel loquela per gestum digitorum, the Ndom language of Papua New Guinea is reported to have senary numerals. Mer means 6, mer an thef means 6 ×2 =12, nif means 36, another example from Papua New Guinea are the Morehead-Maro languages. In these languages, counting is connected to ritualized yam-counting and these languages count from a base six, employing words for the powers of six, running up to 66 for some of the languages. One example is Kómnzo with the numerals, nimbo, féta, tarumba, ntamno, wärämäkä. Some Niger-Congo languages have been reported to use a number system, usually in addition to another. For some purposes, base 6 might be too small a base for convenience. The choice of 36 as a radix is convenient in that the digits can be represented using the Arabic numerals 0–9 and the Latin letters A–Z, this choice is the basis of the base36 encoding scheme. Base36 encoding scheme Binary Ternary Duodecimal Sexagesimal Shacks Base Six Dialectic Digital base 6 clock Analog Clock Designer capable of rendering a base 6 clock Senary base conversion
20.
Natural number
–
In mathematics, the natural numbers are those used for counting and ordering. In common language, words used for counting are cardinal numbers, texts that exclude zero from the natural numbers sometimes refer to the natural numbers together with zero as the whole numbers, but in other writings, that term is used instead for the integers. These chains of extensions make the natural numbers canonically embedded in the number systems. Properties of the numbers, such as divisibility and the distribution of prime numbers, are studied in number theory. Problems concerning counting and ordering, such as partitioning and enumerations, are studied in combinatorics, the most primitive method of representing a natural number is to put down a mark for each object. Later, a set of objects could be tested for equality, excess or shortage, by striking out a mark, the first major advance in abstraction was the use of numerals to represent numbers. This allowed systems to be developed for recording large numbers, the ancient Egyptians developed a powerful system of numerals with distinct hieroglyphs for 1,10, and all the powers of 10 up to over 1 million. A stone carving from Karnak, dating from around 1500 BC and now at the Louvre in Paris, depicts 276 as 2 hundreds,7 tens, and 6 ones, and similarly for the number 4,622. A much later advance was the development of the idea that 0 can be considered as a number, with its own numeral. The use of a 0 digit in place-value notation dates back as early as 700 BC by the Babylonians, the Olmec and Maya civilizations used 0 as a separate number as early as the 1st century BC, but this usage did not spread beyond Mesoamerica. The use of a numeral 0 in modern times originated with the Indian mathematician Brahmagupta in 628, the first systematic study of numbers as abstractions is usually credited to the Greek philosophers Pythagoras and Archimedes. Some Greek mathematicians treated the number 1 differently than larger numbers, independent studies also occurred at around the same time in India, China, and Mesoamerica. In 19th century Europe, there was mathematical and philosophical discussion about the nature of the natural numbers. A school of Naturalism stated that the numbers were a direct consequence of the human psyche. Henri Poincaré was one of its advocates, as was Leopold Kronecker who summarized God made the integers, in opposition to the Naturalists, the constructivists saw a need to improve the logical rigor in the foundations of mathematics. In the 1860s, Hermann Grassmann suggested a recursive definition for natural numbers thus stating they were not really natural, later, two classes of such formal definitions were constructed, later, they were shown to be equivalent in most practical applications. The second class of definitions was introduced by Giuseppe Peano and is now called Peano arithmetic and it is based on an axiomatization of the properties of ordinal numbers, each natural number has a successor and every non-zero natural number has a unique predecessor. Peano arithmetic is equiconsistent with several systems of set theory
21.
30 (number)
–
30 is the natural number following 29 and preceding 31. Thirty is the sum of the first four squares, which makes it a square pyramidal number and it is a primorial and is the smallest Giuga number. 30 is the smallest sphenic number, and the smallest of the form 2 ×3 × r,30 has an aliquot sum of 42, the second sphenic number and all sphenic numbers of this form have an aliquot sum 12 greater than themselves. The aliquot sequence of 30 is 16 members long, it comprises Thirty has but one number for which it is the aliquot sum, adding up some subsets of its divisors gives 30, hence 30 is a semiperfect number. 30 is the largest number such that all smaller than itself. A polygon with thirty sides is called a triacontagon, the icosahedron and the dodecahedron are Platonic solids with 30 edges. The icosidodecahedron is an Archimedean solid with 30 vertices, and the Tutte–Coxeter graph is a graph with 30 vertices. The atomic number of zinc is 30 Messier object M30, a magnitude 8, the duration of Saros series 30 was 1496.5 years, and it contained 84 solar eclipses. Further, the Saros number of the lunar eclipse series began on June 19,1803 BC. The duration of Saros series 30 was 1316.2 years, Thirty is, Used to indicate the end of a newspaper story, a copy editors typographical notation. S. Judas Iscariot betrayed Jesus for 30 pieces of silver, one of the rallying-cries of the 1960s student/youth protest movement was the slogan, Dont trust anyone over thirty. In Franz Kafkas novel The Trial Joseph wakes up on the morning of his birthday to find himself under arrest for an unspecified crime. After making many attempts to find the nature of the crime or the name of his accuser. The number of uprights that formed the Sarsen Circle at Stonehenge, western Christianitys most prolific 20th century essayist, F. W. Also in that essay Boreham writes It was said of Keats, in tennis, the number 30 represents the second point gained in a game. Under NCAA rules for basketball, the offensive team has 30 seconds to attempt a shot. As of 2012, three of the four major leagues in the United States and Canada have 30 teams each. The California Angels baseball team retired the number in honor of its most notable wearer, Nolan Ryan, the San Francisco Giants extended the same honor to Orlando Cepeda
22.
Euler's totient function
–
In number theory, Eulers totient function counts the positive integers up to a given integer n that are relatively prime to n. It is written using the Greek letter phi as φ or ϕ and it can be defined more formally as the number of integers k in the range 1 ≤ k ≤ n for which the greatest common divisor gcd is equal to 1. The integers k of this form are referred to as totatives of n. For example, the totatives of n =9 are the six numbers 1,2,4,5,7 and 8. They are all relatively prime to 9, but the three numbers in this range,3,6, and 9 are not, because gcd = gcd =3. As another example, φ =1 since for n =1 the only integer in the range from 1 to n is 1 itself, Eulers totient function is a multiplicative function, meaning that if two numbers m and n are relatively prime, then φ = φφ. This function gives the order of the group of integers modulo n. It also plays a key role in the definition of the RSA encryption system, leonhard Euler introduced the function in 1763. However, he did not at that time choose any specific symbol to denote it. In a 1784 publication, Euler studied the function further, choosing the Greek letter π to denote it, he wrote πD for the multitude of less than D. This definition varies from the current definition for the totient function at D =1 but is otherwise the same, the now-standard notation φ comes from Gausss 1801 treatise Disquisitiones Arithmeticae. Although Gauss didnt use parentheses around the argument and wrote φA, thus, it is often called Eulers phi function or simply the phi function. In 1879, J. J. Sylvester coined the term totient for this function, so it is referred to as Eulers totient function. Jordans totient is a generalization of Eulers, the cototient of n is defined as n − φ. It counts the number of positive integers less than or equal to n that have at least one factor in common with n. There are several formulas for computing φ and it states φ = n ∏ p ∣ n, where the product is over the distinct prime numbers dividing n. The proof of Eulers product formula depends on two important facts and this means that if gcd =1, then φ = φ φ. If p is prime and k ≥1, then φ = p k − p k −1 = p k −1 = p k, proof, since p is a prime number the only possible values of gcd are 1, p, p2
23.
North American Numbering Plan
–
The North American Numbering Plan is a telephone numbering plan that encompasses 25 distinct regions in twenty countries primarily in North America, including the Caribbean and the U. S. territories. Not all North American countries participate in the NANP, each participating country forms a regulatory authority that has plenary control over local numbering resources. The FCC also serves as the U. S. regulator, Canadian numbering decisions are made by the Canadian Numbering Administration Consortium. The NANP divides the territories of its members into numbering plan areas which are encoded numerically with a telephone number prefix. Each telephone is assigned a telephone number unique only within its respective plan area. The telephone number consists of a central office code and a four-digit station number. The combination of a code and the telephone number serves as a destination routing address in the public switched telephone network. For international call routing, the NANP has been assigned the calling code 1 by the International Telecommunications Union. The North American Numbering Plan conforms with ITU Recommendation E.164, from its beginnings in 1876 and throughout the first part of the 20th century, the Bell System grew from essentially local or regional telephone systems. These systems expanded by growing their subscriber bases, as well as increasing their service areas by implementing additional local exchanges that were interconnected with tie trunks and it was the responsibility of each local administration to design telephone numbering plans that accommodated the local requirements and growth. As a result, the Bell System as a developed into an unorganized system of many differing local numbering systems. The diversity impeded the efficient operation and interconnection of exchanges into a system for long-distance telephone communication. The new numbering plan was accepted in October 1947, dividing most of North America into 86 Numbering Plan Areas. Each NPA was assigned a Numbering Plan Area code, often abbreviated as area code and these codes were first used by long-distance operators to establish long-distance calls between toll offices. The first customer-dialed direct call using area codes was made on November 10,1951, from Englewood, New Jersey, to Alameda, California. Direct distance dialing was introduced across the country and by the early 1960s most areas of the Bell System had been converted and it was commonplace in cities. In the following decades, the system expanded to all of the United States and its territories, Canada, Bermuda. By 1967,129 area codes had been assigned, mexican participation was planned, but implementation stopped after two area codes had been assigned and Mexico opted for an international numbering format, using country code 52
24.
Sampi
–
Sampi is an archaic letter of the Greek alphabet. It later remained in use as a symbol for 900 in the alphabetic system of Greek numerals. Its modern shape, which resembles a π inclining to the right with a longish curved cross-stroke and its current name, sampi, originally probably meant san pi, i. e. like a pi, and is also of medieval origin. The letters original name in antiquity is not known and it has been proposed that sampi was a continuation of the archaic letter san, which was originally shaped like an M and denoted the sound in some other dialects. Besides san, names that have proposed for sampi include parakyisma and angma, while other historically attested terms for it are enacosis, sincope. It has been attested in the cities of Miletus, Ephesos, Halikarnassos, Erythrae, Teos, in the island of Samos, in the Ionian colony of Massilia, and in Kyzikos. In addition, in the city of Pontic Mesembria, on the Black Sea coast of Thrace, it was used on coins, Sampi occurs in positions where other dialects, including written Ionic, normally have double sigma, i. e. a long /ss/ sound. Some other dialects, particularly Attic Greek, have ττ in the same words, the sounds in question are all reflexes of the proto-Greek consonant clusters *, *, *, *, or *. Among the earliest known uses of sampi in this function is an abecedarium from Samos dated to the mid-7th century BC and this early attestation already bears witness to its alphabetic position behind omega, and it shows that its invention cannot have been much later than that of omega itself. The first known use of sampi in writing native Greek words is an inscription found on a silver plate in Ephesus. It can be dated between the late 7th century and mid 6th century BC, an inscription from Halicarnassus has the names Ἁλικαρναͳέν and the personal names Ὀαͳαͳιος and Πνυάͳιος. All of these appear to be of non-Greek, local origin. On a late 6th century bronze plate from Miletus dedicated to the sanctuary of Athena at Assesos and this is currently the first known instance of alphabetic sampi in Miletus itself, commonly assumed to be the birthplace of the numeral system and thus of the later numeric use of sampi. It has been suggested there may be an isolated example of the use of alphabetic sampi in Athens. In a famous painted black figure amphora from c.615 BC, known as the Nessos amphora, the expected regular form of the name would have been either Attic Νέττος – with a double τ – or Ionic Νέσσος. Traces of corrections that are still visible underneath the painted Τ have led to the conjecture that the painter originally wrote Νέͳος, a letter similar to Ionian sampi, but of unknown historical relation with it, existed in the highly deviant local dialect of Pamphylia in southern Asia Minor. According to Brixhe it probably stood for the sounds /s/, /ss/ and it is found in a few inscriptions in the cities of Aspendos and Perge as well as on local coins. For instance, an inscription from Perge dated to around 400 BC reads, anax, it is believed that the letter stood for some type of sibilant reflecting Proto-Greek */ktj/
25.
Pi
–
The number π is a mathematical constant, the ratio of a circles circumference to its diameter, commonly approximated as 3.14159. It has been represented by the Greek letter π since the mid-18th century, being an irrational number, π cannot be expressed exactly as a fraction. Still, fractions such as 22/7 and other numbers are commonly used to approximate π. The digits appear to be randomly distributed, in particular, the digit sequence of π is conjectured to satisfy a specific kind of statistical randomness, but to date no proof of this has been discovered. Also, π is a number, i. e. a number that is not the root of any non-zero polynomial having rational coefficients. This transcendence of π implies that it is impossible to solve the ancient challenge of squaring the circle with a compass, ancient civilizations required fairly accurate computed values for π for practical reasons. It was calculated to seven digits, using techniques, in Chinese mathematics. The extensive calculations involved have also used to test supercomputers. Because its definition relates to the circle, π is found in many formulae in trigonometry and geometry, especially those concerning circles, ellipses, and spheres. Because of its role as an eigenvalue, π appears in areas of mathematics. It is also found in cosmology, thermodynamics, mechanics, attempts to memorize the value of π with increasing precision have led to records of over 70,000 digits. In English, π is pronounced as pie, in mathematical use, the lowercase letter π is distinguished from its capitalized and enlarged counterpart ∏, which denotes a product of a sequence, analogous to how ∑ denotes summation. The choice of the symbol π is discussed in the section Adoption of the symbol π, π is commonly defined as the ratio of a circles circumference C to its diameter d, π = C d The ratio C/d is constant, regardless of the circles size. For example, if a circle has twice the diameter of another circle it will also have twice the circumference, preserving the ratio C/d. This definition of π implicitly makes use of geometry, although the notion of a circle can be extended to any curved geometry. Here, the circumference of a circle is the arc length around the perimeter of the circle, a quantity which can be defined independently of geometry using limits. An integral such as this was adopted as the definition of π by Karl Weierstrass, definitions of π such as these that rely on a notion of circumference, and hence implicitly on concepts of the integral calculus, are no longer common in the literature. One such definition, due to Richard Baltzer, and popularized by Edmund Landau, is the following, the cosine can be defined independently of geometry as a power series, or as the solution of a differential equation
26.
Sphenic number
–
In number theory, a sphenic number is a positive integer that is the product of three distinct prime numbers. A sphenic number is a product pqr where p, q and this definition is more stringent than simply requiring the integer to have exactly three prime factors. For instance,60 =22 ×3 ×5 has exactly 3 prime factors, the smallest sphenic number is 30 =2 ×3 ×5, the product of the smallest three primes. The first few numbers are 30,42,66,70,78,102,105,110,114,130,138,154,165. As of January 2016 the largest known number is × ×. It is the product of the three largest known primes, all sphenic numbers have exactly eight divisors. If we express the number as n = p ⋅ q ⋅ r, where p, q. For example,24 is not a number, but it has exactly eight divisors. All sphenic numbers are by definition squarefree, because the factors must be distinct. The Möbius function of any number is −1. The cyclotomic polynomials Φ n, taken over all sphenic numbers n, the first case of two consecutive sphenic integers is 230 = 2×5×23 and 231 = 3×7×11. The first case of three is 1309 = 7×11×17,1310 = 2×5×131, and 1311 = 3×19×23, there is no case of more than three, because every fourth consecutive positive integer is divisible by 4 = 2×2 and therefore not squarefree. The numbers 2013,2014, and 2015 are all sphenic, the next three consecutive sphenic years will be 2665,2666 and 2667. Semiprimes, products of two prime numbers
27.
Mertens function
–
In number theory, the Mertens function is defined for all positive integers n as M = ∑ k =1 n μ where μ is the Möbius function. The function is named in honour of Franz Mertens and this definition can be extended to positive real numbers as follows, M = M. Less formally, M is the count of square-free integers up to x that have a number of prime factors. Because the Möbius function only takes the values −1,0, and +1, the Mertens conjecture went further, stating that there would be no x where the absolute value of the Mertens function exceeds the square root of x. The Mertens conjecture was proven false in 1985 by Andrew Odlyzko, however, the Riemann hypothesis is equivalent to a weaker conjecture on the growth of M, namely M = O. Since high values for M grow at least as fast as the root of x. Here, O refers to Big O notation, the true rate of growth of M is not known. An unpublished conjecture of Steve Gonek states that 0 < lim sup x → ∞ | M | x 5 /4 < ∞, probabilistic evidence towards this conjecture is given by Nathan Ng. Using the Euler product one finds that 1 ζ = ∏ p = ∑ n =1 ∞ μ n s where ζ is the Riemann zeta function and the product is taken over primes. Then, using this Dirichlet series with Perrons formula, one obtains,12 π i ∫ c − i ∞ c + i ∞ x s s ζ d s = M where c >1. Conversely, one has the Mellin transform 1 ζ = s ∫1 ∞ M x s +1 d x which holds for R e >1. A curious relation given by Mertens himself involving the second Chebyshev function is ψ = M log + M log + M log + ⋯. Assuming that there are not multiple non-trivial roots of ζ we have the formula by the residue theorem. Weyl conjectured that the Mertens function satisfied the approximate functional-differential equation y 2 − ∑ r =1 N B2 r. Another formula for the Mertens function is M = ∑ a ∈ F n e 2 π i a where F n is the Farey sequence of order n and this formula is used in the proof of the Franel–Landau theorem. M is the determinant of the n × n Redheffer matrix, using sieve methods similar to those used in prime counting, the Mertens function has been computed for all integers up to an increasing range of x. The Mertens function for all values up to x may be computed in O time. Combinatorial based algorithms can compute isolated values of M in O time, see A084237 for values of M at powers of 10
28.
Greater Toronto Area
–
The Greater Toronto Area is the most populous metropolitan area in Canada. As of the 2016 census, it has a population of 6,417,516, the Greater Toronto Area is defined as the central city of Toronto, and the four regional municipalities that surround it, Durham, Halton, Peel, and York. The regional span of the Greater Toronto Area is sometimes combined with the city of Hamilton, Ontario and its region, to form the Greater Toronto. The Greater Toronto Area anchors a much larger urban agglomeration known as the Golden Horseshoe. However, it did not come into everyday usage until the mid- to late 1990s, the latter includes communities like Barrie, Guelph and the Niagara Region. The GTA continues, however, to be in use elsewhere in the Government of Ontario. For example, Oshawa, which is the centre of its own CMA, other municipalities, such as New Tecumseth in southern Simcoe County and Mono Township in Dufferin County are included in the Toronto CMA but not in the GTA. Other nearby urban areas, such as Hamilton, Barrie or St. Catharines-Niagara and Kitchener-Waterloo, are not part of the GTA or the Toronto CMA, but form their own CMAs near the GTA. Ultimately, all the places are part of the Golden Horseshoe metropolitan region, an urban agglomeration. When the Hamilton, Oshawa and Toronto CMAs are agglomerated with Brock and Scugog and it is part of the Great Lakes Megalopolis, containing an estimated 59 million people in 2011. The term Greater Toronto and Hamilton Area refers to the usual GTA plus the former Regional Municipality of Hamilton–Wentworth, the Greater Toronto Area was home to a number of First Nations groups who lived on the shore of Lake Ontario long before the first Europeans arrived in the region. At various times the Neutral, Seneca, Mohawk and Huron nations were living in the vicinity, the Mississaugas arrived in the late seventeenth or early eighteenth century, driving out the occupying Iroquois. While it is unclear as to who was the first European to reach the Toronto area, the area would later become very crucial for its series of trails and water routes that led from northern and western Canada to the Gulf of Mexico. Known as the Toronto Passage, it followed the Humber River, for this reason area became a hot spot for French fur traders. In 1787, the British negotiated the purchase of more than a million acres of land in the area of Toronto with the Mississaugas of New Credit. The Town of York would later be attacked by American forces in the War of 1812 in what is now known as the Battle of York, in 1816, Wentworth County and Halton County were created from York County. In 1851, Ontario County and Peel County were separated from York, the idea for a single government municipality would not be seriously explored until the late 1940s when planners decided the city needed to incorporate its immediate suburbs. However, due to opposition from suburban politicians, a compromise was struck which resulted in the creation of Metropolitan Toronto