1.
Oxford University Press
–
Oxford University Press is the largest university press in the world, and the second oldest after Cambridge University Press. It is a department of the University of Oxford and is governed by a group of 15 academics appointed by the known as the delegates of the press. They are headed by the secretary to the delegates, who serves as OUPs chief executive, Oxford University has used a similar system to oversee OUP since the 17th century. The university became involved in the print trade around 1480, and grew into a printer of Bibles, prayer books. OUP took on the project became the Oxford English Dictionary in the late 19th century. Moves into international markets led to OUP opening its own offices outside the United Kingdom, by contracting out its printing and binding operations, the modern OUP publishes some 6,000 new titles around the world each year. OUP was first exempted from United States corporation tax in 1972, as a department of a charity, OUP is exempt from income tax and corporate tax in most countries, but may pay sales and other commercial taxes on its products. The OUP today transfers 30% of its surplus to the rest of the university. OUP is the largest university press in the world by the number of publications, publishing more than 6,000 new books every year, the Oxford University Press Museum is located on Great Clarendon Street, Oxford. Visits must be booked in advance and are led by a member of the archive staff, displays include a 19th-century printing press, the OUP buildings, and the printing and history of the Oxford Almanack, Alice in Wonderland and the Oxford English Dictionary. The first printer associated with Oxford University was Theoderic Rood, the first book printed in Oxford, in 1478, an edition of Rufinuss Expositio in symbolum apostolorum, was printed by another, anonymous, printer. Famously, this was mis-dated in Roman numerals as 1468, thus apparently pre-dating Caxton, roods printing included John Ankywylls Compendium totius grammaticae, which set new standards for teaching of Latin grammar. After Rood, printing connected with the university remained sporadic for over half a century, the chancellor, Robert Dudley, 1st Earl of Leicester, pleaded Oxfords case. Some royal assent was obtained, since the printer Joseph Barnes began work, Oxfords chancellor, Archbishop William Laud, consolidated the legal status of the universitys printing in the 1630s. Laud envisaged a unified press of world repute, Oxford would establish it on university property, govern its operations, employ its staff, determine its printed work, and benefit from its proceeds. To that end, he petitioned Charles I for rights that would enable Oxford to compete with the Stationers Company and the Kings Printer and these were brought together in Oxfords Great Charter in 1636, which gave the university the right to print all manner of books. Laud also obtained the privilege from the Crown of printing the King James or Authorized Version of Scripture at Oxford and this privilege created substantial returns in the next 250 years, although initially it was held in abeyance. The Stationers Company was deeply alarmed by the threat to its trade, under this, the Stationers paid an annual rent for the university not to exercise its full printing rights – money Oxford used to purchase new printing equipment for smaller purposes

2.
Hilbert space
–
The mathematical concept of a Hilbert space, named after David Hilbert, generalizes the notion of Euclidean space. It extends the methods of algebra and calculus from the two-dimensional Euclidean plane. A Hilbert space is a vector space possessing the structure of an inner product that allows length. Furthermore, Hilbert spaces are complete, there are limits in the space to allow the techniques of calculus to be used. Hilbert spaces arise naturally and frequently in mathematics and physics, typically as infinite-dimensional function spaces, the earliest Hilbert spaces were studied from this point of view in the first decade of the 20th century by David Hilbert, Erhard Schmidt, and Frigyes Riesz. They are indispensable tools in the theories of partial differential equations, quantum mechanics, Fourier analysis —and ergodic theory, john von Neumann coined the term Hilbert space for the abstract concept that underlies many of these diverse applications. The success of Hilbert space methods ushered in a very fruitful era for functional analysis, geometric intuition plays an important role in many aspects of Hilbert space theory. Exact analogs of the Pythagorean theorem and parallelogram law hold in a Hilbert space, at a deeper level, perpendicular projection onto a subspace plays a significant role in optimization problems and other aspects of the theory. An element of a Hilbert space can be specified by its coordinates with respect to a set of coordinate axes. When that set of axes is countably infinite, this means that the Hilbert space can also usefully be thought of in terms of the space of sequences that are square-summable. The latter space is often in the literature referred to as the Hilbert space. One of the most familiar examples of a Hilbert space is the Euclidean space consisting of vectors, denoted by ℝ3. The dot product takes two vectors x and y, and produces a real number x·y, If x and y are represented in Cartesian coordinates, then the dot product is defined by ⋅ = x 1 y 1 + x 2 y 2 + x 3 y 3. The dot product satisfies the properties, It is symmetric in x and y, x · y = y · x. It is linear in its first argument, · y = ax1 · y + bx2 · y for any scalars a, b, and vectors x1, x2, and y. It is positive definite, for all x, x · x ≥0, with equality if. An operation on pairs of vectors that, like the dot product, a vector space equipped with such an inner product is known as a inner product space. Every finite-dimensional inner product space is also a Hilbert space, multivariable calculus in Euclidean space relies on the ability to compute limits, and to have useful criteria for concluding that limits exist

3.
Banach space
–
In mathematics, more specifically in functional analysis, a Banach space is a complete normed vector space. Banach spaces are named after the Polish mathematician Stefan Banach, who introduced this concept and studied it systematically in 1920–1922 along with Hans Hahn, Banach spaces originally grew out of the study of function spaces by Hilbert, Fréchet, and Riesz earlier in the century. Banach spaces play a role in functional analysis. In other areas of analysis, the spaces under study are often Banach spaces, the vector space structure allows one to relate the behavior of Cauchy sequences to that of converging series of vectors. All norms on a vector space are equivalent. Every finite-dimensional normed space over R or C is a Banach space, if X and Y are normed spaces over the same ground field K, the set of all continuous K-linear maps T, X → Y is denoted by B. In infinite-dimensional spaces, not all maps are continuous. For Y a Banach space, the space B is a Banach space with respect to this norm, if X is a Banach space, the space B = B forms a unital Banach algebra, the multiplication operation is given by the composition of linear maps. If X and Y are normed spaces, they are isomorphic normed spaces if there exists a linear bijection T, X → Y such that T, if one of the two spaces X or Y is complete then so is the other space. Two normed spaces X and Y are isometrically isomorphic if in addition, T is an isometry, the Banach–Mazur distance d between two isomorphic but not isometric spaces X and Y gives a measure of how much the two spaces X and Y differ. Every normed space X can be embedded in a Banach space. More precisely, there is a Banach space Y and an isometric mapping T, X → Y such that T is dense in Y. If Z is another Banach space such that there is an isomorphism from X onto a dense subset of Z. This Banach space Y is the completion of the normed space X, the underlying metric space for Y is the same as the metric completion of X, with the vector space operations extended from X to Y. The completion of X is often denoted by X ^, the cartesian product X × Y of two normed spaces is not canonically equipped with a norm. However, several equivalent norms are used, such as ∥ ∥1 = ∥ x ∥ + ∥ y ∥, ∥ ∥ ∞ = max. In this sense, the product X × Y is complete if and only if the two factors are complete. If M is a linear subspace of a normed space X, there is a natural norm on the quotient space X / M

4.
Stereotype space
–
In functional analysis and related areas of mathematics stereotype spaces are topological vector spaces defined by a special variant of reflexivity condition. Each pseudocomplete barreled space X is stereotype, a metrizable locally convex space X is stereotype if and only if X is complete. Each infinite dimensional normed space X considered with the X ⋆ -weak topology is not stereotype, there exist stereotype spaces which are not Mackey spaces. Some simple connections between the properties of a stereotype space X and those of its dual space X ⋆ are expressed in the following list of regularities, the first results on this type of reflexivity of topological vector spaces were obtained by M. F. Smith in 1952. Further investigations were conducted by B. S. Brudovskii, W. C, waterhouse, K. Brauner, S. S. Akbarov, and E. T. Shavgulidze. Each locally convex space X can be transformed into a space with the help of the standard operations of pseudocompletion and pseudosaturation defined by the following two propositions. If X is a locally convex space, then its pseudosaturation X △ is stereotype. Dually, if X is a locally convex space, then its pseudocompletion X ▽ is stereotype. For arbitrary locally convex space X the spaces X △ ▽ and X ▽ △ are stereotype and it defines two natural tensor products X ⊛ Y, = Hom ⋆, X ⊙ Y, = Hom. This condition is weaker than the existence of the Schauder basis, the following proposition holds, If two stereotype spaces X and Y have the stereotype approximation property, then the spaces Hom, X ⊛ Y and X ⊙ Y have the stereotype approximation property as well. In particular, if X has the approximation property, then the same is true for X ⋆. This allows to reduce the list of counterexamples in comparison with the Banach theory, the arising theory of stereotype algebras allows to simplify constructions in the duality theories for non-commutative groups. In particular, the group algebras in these theories become Hopf algebras in the algebraic sense. Schaefer, Helmuth H. Topological vector spaces, Robertson, A. P. Robertson, W. J. Topological vector spaces. The Pontrjagin duality theorem in linear spaces, on k- and c-reflexivity of locally convex vector spaces. Brauner, K. Duals of Fréchet spaces and a generalization of the Banach-Dieudonné theorem, Akbarov, S. S. Pontryagin duality in the theory of topological vector spaces and in topological algebra. Akbarov, S. S. Holomorphic functions of exponential type, envelopes and refinements in categories, with applications to functional analysis. On two classes of spaces reflexive in the sense of Pontryagin, Akbarov, S. S. Pontryagin duality and topological algebras

5.
Inner product space
–
In linear algebra, an inner product space is a vector space with an additional structure called an inner product. This additional structure associates each pair of vectors in the space with a quantity known as the inner product of the vectors. Inner products allow the introduction of intuitive geometrical notions such as the length of a vector or the angle between two vectors. They also provide the means of defining orthogonality between vectors, inner product spaces generalize Euclidean spaces to vector spaces of any dimension, and are studied in functional analysis. An inner product induces a associated norm, thus an inner product space is also a normed vector space. A complete space with a product is called a Hilbert space. An space with a product is called a pre-Hilbert space, since its completion with respect to the norm induced by the inner product is a Hilbert space. Inner product spaces over the field of numbers are sometimes referred to as unitary spaces. In this article, the field of scalars denoted F is either the field of real numbers R or the field of complex numbers C, formally, an inner product space is a vector space V over the field F together with an inner product, i. e. Some authors, especially in physics and matrix algebra, prefer to define the inner product, then the first argument becomes conjugate linear, rather than the second. In those disciplines we would write the product ⟨ x, y ⟩ as ⟨ y | x ⟩, respectively y † x. Here the kets and columns are identified with the vectors of V and this reverse order is now occasionally followed in the more abstract literature, taking ⟨ x, y ⟩ to be conjugate linear in x rather than y. A few instead find a ground by recognizing both ⟨ ⋅, ⋅ ⟩ and ⟨ ⋅ | ⋅ ⟩ as distinct notations differing only in which argument is conjugate linear. There are various reasons why it is necessary to restrict the basefield to R and C in the definition. Briefly, the basefield has to contain an ordered subfield in order for non-negativity to make sense, the basefield has to have additional structure, such as a distinguished automorphism. More generally any quadratically closed subfield of R or C will suffice for this purpose, however in these cases when it is a proper subfield even finite-dimensional inner product spaces will fail to be metrically complete. In contrast all finite-dimensional inner product spaces over R or C, such as used in quantum computation, are automatically metrically complete. In some cases we need to consider non-negative semi-definite sesquilinear forms and this means that ⟨ x, x ⟩ is only required to be non-negative

6.
Euclidean space
–
In geometry, Euclidean space encompasses the two-dimensional Euclidean plane, the three-dimensional space of Euclidean geometry, and certain other spaces. It is named after the Ancient Greek mathematician Euclid of Alexandria, the term Euclidean distinguishes these spaces from other types of spaces considered in modern geometry. Euclidean spaces also generalize to higher dimensions, classical Greek geometry defined the Euclidean plane and Euclidean three-dimensional space using certain postulates, while the other properties of these spaces were deduced as theorems. Geometric constructions are used to define rational numbers. It means that points of the space are specified with collections of real numbers and this approach brings the tools of algebra and calculus to bear on questions of geometry and has the advantage that it generalizes easily to Euclidean spaces of more than three dimensions. From the modern viewpoint, there is only one Euclidean space of each dimension. With Cartesian coordinates it is modelled by the coordinate space of the same dimension. In one dimension, this is the line, in two dimensions, it is the Cartesian plane, and in higher dimensions it is a coordinate space with three or more real number coordinates. One way to think of the Euclidean plane is as a set of points satisfying certain relationships, expressible in terms of distance, for example, there are two fundamental operations on the plane. One is translation, which means a shifting of the plane so that point is shifted in the same direction. The other is rotation about a point in the plane. In order to all of this mathematically precise, the theory must clearly define the notions of distance, angle, translation. Even when used in theories, Euclidean space is an abstraction detached from actual physical locations, specific reference frames, measurement instruments. The standard way to such space, as carried out in the remainder of this article, is to define the Euclidean plane as a two-dimensional real vector space equipped with an inner product. The reason for working with vector spaces instead of Rn is that it is often preferable to work in a coordinate-free manner. Once the Euclidean plane has been described in language, it is actually a simple matter to extend its concept to arbitrary dimensions. For the most part, the vocabulary, formulae, and calculations are not made any more difficult by the presence of more dimensions. Intuitively, the distinction says merely that there is no choice of where the origin should go in the space

7.
Vector space
–
A vector space is a collection of objects called vectors, which may be added together and multiplied by numbers, called scalars in this context. Scalars are often taken to be numbers, but there are also vector spaces with scalar multiplication by complex numbers, rational numbers. The operations of addition and scalar multiplication must satisfy certain requirements, called axioms. Euclidean vectors are an example of a vector space and they represent physical quantities such as forces, any two forces can be added to yield a third, and the multiplication of a force vector by a real multiplier is another force vector. In the same vein, but in a more geometric sense, Vector spaces are the subject of linear algebra and are well characterized by their dimension, which, roughly speaking, specifies the number of independent directions in the space. Infinite-dimensional vector spaces arise naturally in mathematical analysis, as function spaces and these vector spaces are generally endowed with additional structure, which may be a topology, allowing the consideration of issues of proximity and continuity. Among these topologies, those that are defined by a norm or inner product are commonly used. This is particularly the case of Banach spaces and Hilbert spaces, historically, the first ideas leading to vector spaces can be traced back as far as the 17th centurys analytic geometry, matrices, systems of linear equations, and Euclidean vectors. Today, vector spaces are applied throughout mathematics, science and engineering, furthermore, vector spaces furnish an abstract, coordinate-free way of dealing with geometrical and physical objects such as tensors. This in turn allows the examination of local properties of manifolds by linearization techniques, Vector spaces may be generalized in several ways, leading to more advanced notions in geometry and abstract algebra. The concept of space will first be explained by describing two particular examples, The first example of a vector space consists of arrows in a fixed plane. This is used in physics to describe forces or velocities, given any two such arrows, v and w, the parallelogram spanned by these two arrows contains one diagonal arrow that starts at the origin, too. This new arrow is called the sum of the two arrows and is denoted v + w, when a is negative, av is defined as the arrow pointing in the opposite direction, instead. Such a pair is written as, the sum of two such pairs and multiplication of a pair with a number is defined as follows, + = and a =. The first example above reduces to one if the arrows are represented by the pair of Cartesian coordinates of their end points. A vector space over a field F is a set V together with two operations that satisfy the eight axioms listed below, elements of V are commonly called vectors. Elements of F are commonly called scalars, the second operation, called scalar multiplication takes any scalar a and any vector v and gives another vector av. In this article, vectors are represented in boldface to distinguish them from scalars

8.
Convex set
–
In convex geometry, a convex set is a subset of an affine space that is closed under convex combinations. For example, a cube is a convex set, but anything that is hollow or has an indent, for example. The boundary of a set is always a convex curve. The intersection of all convex sets containing a given subset A of Euclidean space is called the hull of A. It is the smallest convex set containing A, a convex function is a real-valued function defined on an interval with the property that its epigraph is a convex set. Convex minimization is a subfield of optimization that studies the problem of minimizing convex functions over convex sets, the branch of mathematics devoted to the study of properties of convex sets and convex functions is called convex analysis. The notion of a set can be generalized as described below. Let S be a space over the real numbers, or, more generally. A set C in S is said to be if, for all x and y in C and all t in the interval. In other words, every point on the segment connecting x and y is in C. This implies that a set in a real or complex topological vector space is path-connected. Furthermore, C is strictly convex if every point on the segment connecting x and y other than the endpoints is inside the interior of C. A set C is called convex if it is convex. The convex subsets of R are simply the intervals of R, some examples of convex subsets of the Euclidean plane are solid regular polygons, solid triangles, and intersections of solid triangles. Some examples of convex subsets of a Euclidean 3-dimensional space are the Archimedean solids, the Kepler-Poinsot polyhedra are examples of non-convex sets. A set that is not convex is called a non-convex set, the complement of a convex set, such as the epigraph of a concave function, is sometimes called a reverse convex set, especially in the context of mathematical optimization. If S is a set in n-dimensional space, then for any collection of r, r >1. Ur in S, and for any nonnegative numbers λ1, + λr =1, then one has, ∑ k =1 r λ k u k ∈ S

9.
Interior (topology)
–
In mathematics, specifically in topology, the interior of a subset S of points of a topological space X consists of all points of S that do not belong to the boundary of S. A point that is in the interior of S is a point of S. The interior of S is the complement of the closure of the complement of S, in this sense interior and closure are dual notions. The exterior of a set is the interior of its complement, equivalently the complement of its closure, the interior, boundary, and exterior of a subset together partition the whole space into three blocks. The interior and exterior are always open while the boundary is always closed, sets with empty interior have been called boundary sets. If S is a subset of a Euclidean space, then x is a point of S if there exists an open ball centered at x which is completely contained in S. This definition generalizes to any subset S of a metric space X with metric d, x is a point of S if there exists r >0. This definition generalises to topological spaces by replacing open ball with open set, let S be a subset of a topological space X. Then x is a point of S if x is contained in an open subset of S. The interior of a set S is the set of all points of S. The interior of S is denoted int, Int or So, the interior of a set has the following properties. Int is a subset of S. int is the union of all open sets contained in S. int is the largest open set contained in S. A set S is open if and only if S = int. int = int, if S is a subset of T, then int is a subset of int. If A is a set, then A is a subset of S if. Sometimes the second or third property above is taken as the definition of the topological interior, for more on this matter, see interior operator below. In any space, the interior of the empty set is the empty set, in any space X, if A ⊂ X, int is contained in A. If X is the Euclidean space R of real numbers, then int =, if X is the Euclidean space R, then the interior of the set Q of rational numbers is empty. If X is the complex plane C = R2, then i n t =, in any Euclidean space, the interior of any finite set is the empty set

10.
International Standard Book Number
–
The International Standard Book Number is a unique numeric commercial book identifier. An ISBN is assigned to each edition and variation of a book, for example, an e-book, a paperback and a hardcover edition of the same book would each have a different ISBN. The ISBN is 13 digits long if assigned on or after 1 January 2007, the method of assigning an ISBN is nation-based and varies from country to country, often depending on how large the publishing industry is within a country. The initial ISBN configuration of recognition was generated in 1967 based upon the 9-digit Standard Book Numbering created in 1966, the 10-digit ISBN format was developed by the International Organization for Standardization and was published in 1970 as international standard ISO2108. Occasionally, a book may appear without a printed ISBN if it is printed privately or the author does not follow the usual ISBN procedure, however, this can be rectified later. Another identifier, the International Standard Serial Number, identifies periodical publications such as magazines, the ISBN configuration of recognition was generated in 1967 in the United Kingdom by David Whitaker and in 1968 in the US by Emery Koltay. The 10-digit ISBN format was developed by the International Organization for Standardization and was published in 1970 as international standard ISO2108, the United Kingdom continued to use the 9-digit SBN code until 1974. The ISO on-line facility only refers back to 1978, an SBN may be converted to an ISBN by prefixing the digit 0. For example, the edition of Mr. J. G. Reeder Returns, published by Hodder in 1965, has SBN340013818 -340 indicating the publisher,01381 their serial number. This can be converted to ISBN 0-340-01381-8, the check digit does not need to be re-calculated, since 1 January 2007, ISBNs have contained 13 digits, a format that is compatible with Bookland European Article Number EAN-13s. An ISBN is assigned to each edition and variation of a book, for example, an ebook, a paperback, and a hardcover edition of the same book would each have a different ISBN. The ISBN is 13 digits long if assigned on or after 1 January 2007, a 13-digit ISBN can be separated into its parts, and when this is done it is customary to separate the parts with hyphens or spaces. Separating the parts of a 10-digit ISBN is also done with either hyphens or spaces, figuring out how to correctly separate a given ISBN number is complicated, because most of the parts do not use a fixed number of digits. ISBN issuance is country-specific, in that ISBNs are issued by the ISBN registration agency that is responsible for country or territory regardless of the publication language. Some ISBN registration agencies are based in national libraries or within ministries of culture, in other cases, the ISBN registration service is provided by organisations such as bibliographic data providers that are not government funded. In Canada, ISBNs are issued at no cost with the purpose of encouraging Canadian culture. In the United Kingdom, United States, and some countries, where the service is provided by non-government-funded organisations. Australia, ISBNs are issued by the library services agency Thorpe-Bowker

11.
Norm (mathematics)
–
A seminorm, on the other hand, is allowed to assign zero length to some non-zero vectors. A norm must also satisfy certain properties pertaining to scalability and additivity which are given in the definition below. A simple example is the 2-dimensional Euclidean space R2 equipped with the Euclidean norm, elements in this vector space are usually drawn as arrows in a 2-dimensional cartesian coordinate system starting at the origin. The Euclidean norm assigns to each vector the length of its arrow, because of this, the Euclidean norm is often known as the magnitude. A vector space on which a norm is defined is called a vector space. Similarly, a space with a seminorm is called a seminormed vector space. It is often possible to supply a norm for a vector space in more than one way. If p =0 then v is the zero vector, by the first axiom, absolute homogeneity, we have p =0 and p = p, so that by the triangle inequality p ≥0. A seminorm on V is a p, V → R with the properties 1. and 2. Every vector space V with seminorm p induces a normed space V/W, called the quotient space, the induced norm on V/W is clearly well-defined and is given by, p = p. A topological vector space is called if the topology of the space can be induced by a norm. If a norm p, V → R is given on a vector space V then the norm of a vector v ∈ V is usually denoted by enclosing it within double vertical lines, such notation is also sometimes used if p is only a seminorm. For the length of a vector in Euclidean space, the notation | v | with single vertical lines is also widespread, in Unicode, the codepoint of the double vertical line character ‖ is U+2016. The double vertical line should not be confused with the parallel to symbol and this is usually not a problem because the former is used in parenthesis-like fashion, whereas the latter is used as an infix operator. The double vertical line used here should not be confused with the symbol used to denote lateral clicks. The single vertical line | is called vertical line in Unicode, the trivial seminorm has p =0 for all x in V. Every linear form f on a vector space defines a seminorm by x → | f |, the absolute value ∥ x ∥ = | x | is a norm on the one-dimensional vector spaces formed by the real or complex numbers. The absolute value norm is a case of the L1 norm

12.
Topological vector space
–
In mathematics, a topological vector space is one of the basic structures investigated in functional analysis. As the name suggests the space blends a topological structure with the concept of a vector space. Hilbert spaces and Banach spaces are well-known examples, unless stated otherwise, the underlying field of a topological vector space is assumed to be either the complex numbers C or the real numbers R. Some authors require the topology on X to be T1, it follows that the space is Hausdorff. The topological and linear algebraic structures can be tied together even more closely with additional assumptions, the category of topological vector spaces over a given topological field K is commonly denoted TVSK or TVectK. The objects are the vector spaces over K and the morphisms are the continuous K-linear maps from one object to another. Every normed vector space has a topological structure, the norm induces a metric. This is a vector space because, The vector addition +, V × V → V is jointly continuous with respect to this topology. This follows directly from the triangle inequality obeyed by the norm, the scalar multiplication ·, K × V → V, where K is the underlying scalar field of V, is jointly continuous. This follows from the inequality and homogeneity of the norm. Therefore, all Banach spaces and Hilbert spaces are examples of vector spaces. There are topological spaces whose topology is not induced by a norm. These are all examples of Montel spaces, an infinite-dimensional Montel space is never normable. A topological field is a vector space over each of its subfields. A cartesian product of a family of vector spaces, when endowed with the product topology, is a topological vector space. For instance, the set X of all functions f, R → R, with this topology, X becomes a topological vector space, called the space of pointwise convergence. The reason for this name is the following, if is a sequence of elements in X, then fn has limit f in X if and only if fn has limit f for every real number x. This space is complete, but not normable, indeed, every neighborhood of 0 in the topology contains lines