Telecommunication is the transmission of signs, messages, writings and sounds or information of any nature by wire, optical or other electromagnetic systems. Telecommunication occurs when the exchange of information between communication participants includes the use of technology, it is transmitted either electrically over physical media, such as cables, or via electromagnetic radiation. Such transmission paths are divided into communication channels which afford the advantages of multiplexing. Since the Latin term communicatio is considered the social process of information exchange, the term telecommunications is used in its plural form because it involves many different technologies. Early means of communicating over a distance included visual signals, such as beacons, smoke signals, semaphore telegraphs, signal flags, optical heliographs. Other examples of pre-modern long-distance communication included audio messages such as coded drumbeats, lung-blown horns, loud whistles. 20th- and 21st-century technologies for long-distance communication involve electrical and electromagnetic technologies, such as telegraph and teleprinter, radio, microwave transmission, fiber optics, communications satellites.
A revolution in wireless communication began in the first decade of the 20th century with the pioneering developments in radio communications by Guglielmo Marconi, who won the Nobel Prize in Physics in 1909, other notable pioneering inventors and developers in the field of electrical and electronic telecommunications. These included Charles Wheatstone and Samuel Morse, Alexander Graham Bell, Edwin Armstrong and Lee de Forest, as well as Vladimir K. Zworykin, John Logie Baird and Philo Farnsworth; the word telecommunication is a compound of the Greek prefix tele, meaning distant, far off, or afar, the Latin communicare, meaning to share. Its modern use is adapted from the French, because its written use was recorded in 1904 by the French engineer and novelist Édouard Estaunié. Communication was first used as an English word in the late 14th century, it comes from Old French comunicacion, from Latin communicationem, noun of action from past participle stem of communicare "to share, divide out.
Homing pigeons have been used throughout history by different cultures. Pigeon post had Persian roots, was used by the Romans to aid their military. Frontinus said; the Greeks conveyed the names of the victors at the Olympic Games to various cities using homing pigeons. In the early 19th century, the Dutch government used the system in Sumatra, and in 1849, Paul Julius Reuter started a pigeon service to fly stock prices between Aachen and Brussels, a service that operated for a year until the gap in the telegraph link was closed. In the Middle Ages, chains of beacons were used on hilltops as a means of relaying a signal. Beacon chains suffered the drawback that they could only pass a single bit of information, so the meaning of the message such as "the enemy has been sighted" had to be agreed upon in advance. One notable instance of their use was during the Spanish Armada, when a beacon chain relayed a signal from Plymouth to London. In 1792, Claude Chappe, a French engineer, built the first fixed visual telegraphy system between Lille and Paris.
However semaphore suffered from the need for skilled operators and expensive towers at intervals of ten to thirty kilometres. As a result of competition from the electrical telegraph, the last commercial line was abandoned in 1880. On 25 July 1837 the first commercial electrical telegraph was demonstrated by English inventor Sir William Fothergill Cooke, English scientist Sir Charles Wheatstone. Both inventors viewed their device as "an improvement to the electromagnetic telegraph" not as a new device. Samuel Morse independently developed a version of the electrical telegraph that he unsuccessfully demonstrated on 2 September 1837, his code was an important advance over Wheatstone's signaling method. The first transatlantic telegraph cable was completed on 27 July 1866, allowing transatlantic telecommunication for the first time; the conventional telephone was invented independently by Alexander Bell and Elisha Gray in 1876. Antonio Meucci invented the first device that allowed the electrical transmission of voice over a line in 1849.
However Meucci's device was of little practical value because it relied upon the electrophonic effect and thus required users to place the receiver in their mouth to "hear" what was being said. The first commercial telephone services were set-up in 1878 and 1879 on both sides of the Atlantic in the cities of New Haven and London. Starting in 1894, Italian inventor Guglielmo Marconi began developing a wireless communication using the newly discovered phenomenon of radio waves, showing by 1901 that they could be transmitted across the Atlantic Ocean; this was the start of wireless telegraphy by radio. Voice and music had little early success. World War I accelerated the development of radio for military communications. After the war, commercial radio AM broadcasting began in the 1920s and became an important mass medium for entertainment and news. World War II again accelerated development of radio for the wartime purposes of aircraft and land communication, radio navigation and radar. Development of stereo FM broadcasting of radio
In the broadest definition, a sensor is a device, module, or subsystem whose purpose is to detect events or changes in its environment and send the information to other electronics a computer processor. A sensor is always used with other electronics. Sensors are used in everyday objects such as touch-sensitive elevator buttons and lamps which dim or brighten by touching the base, besides innumerable applications of which most people are never aware. With advances in micromachinery and easy-to-use microcontroller platforms, the uses of sensors have expanded beyond the traditional fields of temperature, pressure or flow measurement, for example into MARG sensors. Moreover, analog sensors such as potentiometers and force-sensing resistors are still used. Applications include manufacturing and machinery and aerospace, medicine and many other aspects of our day-to-day life. A sensor's sensitivity indicates how much the sensor's output changes when the input quantity being measured changes. For instance, if the mercury in a thermometer moves 1 cm when the temperature changes by 1 °C, the sensitivity is 1 cm/°C.
Some sensors can affect what they measure. Sensors are designed to have a small effect on what is measured. Technological progress allows more and more sensors to be manufactured on a microscopic scale as microsensors using MEMS technology. In most cases, a microsensor reaches a higher speed and sensitivity compared with macroscopic approaches. A good sensor obeys the following rules:: it is sensitive to the measured property it is insensitive to any other property to be encountered in its application, it does not influence the measured property. Most sensors have a linear transfer function; the sensitivity is defined as the ratio between the output signal and measured property. For example, if a sensor measures temperature and has a voltage output, the sensitivity is a constant with the units; the sensitivity is the slope of the transfer function. Converting the sensor's electrical output to the measured units requires dividing the electrical output by the slope. In addition, an offset is added or subtracted.
For example, -40 must be added to the output. For an analog sensor signal to be processed, or used in digital equipment, it needs to be converted to a digital signal, using an analog-to-digital converter. Since sensors cannot replicate an ideal transfer function, several types of deviations can occur which limit sensor accuracy: Since the range of the output signal is always limited, the output signal will reach a minimum or maximum when the measured property exceeds the limits; the full scale range defines the minimum values of the measured property. The sensitivity may in practice differ from the value specified; this is called a sensitivity error. This is an error in the slope of a linear transfer function. If the output signal differs from the correct value by a constant, the sensor has an offset error or bias; this is an error in the y-intercept of a linear transfer function. Nonlinearity is deviation of a sensor's transfer function from a straight line transfer function; this is defined by the amount the output differs from ideal behavior over the full range of the sensor noted as a percentage of the full range.
Deviation caused by rapid changes of the measured property over time is a dynamic error. This behavior is described with a bode plot showing sensitivity error and phase shift as a function of the frequency of a periodic input signal. If the output signal changes independent of the measured property, this is defined as drift. Long term drift over months or years is caused by physical changes in the sensor. Noise is a random deviation of the signal. A hysteresis error causes the output value to vary depending on the previous input values. If a sensor's output is different depending on whether a specific input value was reached by increasing vs. decreasing the input the sensor has a hysteresis error. If the sensor has a digital output, the output is an approximation of the measured property; this error is called quantization error. If the signal is monitored digitally, the sampling frequency can cause a dynamic error, or if the input variable or added noise changes periodically at a frequency near a multiple of the sampling rate, aliasing errors may occur.
The sensor may to some extent be sensitive to properties other than the property being measured. For example, most sensors are influenced by the temperature of their environment. A hysteresis error causes the output value to vary depending on the previous input values. If a sensor's output is different depending on whether a specific input value was reached by increasing vs. decreasing the input the sensor has a hysteresis error. All these deviations can be classified as random errors. Systematic errors can sometimes be compensated for by means of some kind of calibration strategy. Noise is a random error that can be reduced by signal processing, such as filtering at the expense of the dynamic behavior of the sensor; the resolution of a sensor is the smallest change it can detect in the quantity that it is measuring. The resolution of a sensor with a digital output is the resolution of the digital output; the resolution is related to the precision with which the mea
An optical fiber is a flexible, transparent fiber made by drawing glass or plastic to a diameter thicker than that of a human hair. Optical fibers are used most as a means to transmit light between the two ends of the fiber and find wide usage in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths than electrical cables. Fibers are used instead of metal wires. Fibers are used for illumination and imaging, are wrapped in bundles so they may be used to carry light into, or images out of confined spaces, as in the case of a fiberscope. Specially designed fibers are used for a variety of other applications, some of them being fiber optic sensors and fiber lasers. Optical fibers include a core surrounded by a transparent cladding material with a lower index of refraction. Light is kept in the core by the phenomenon of total internal reflection which causes the fiber to act as a waveguide. Fibers that support many propagation paths or transverse modes are called multi-mode fibers, while those that support a single mode are called single-mode fibers.
Multi-mode fibers have a wider core diameter and are used for short-distance communication links and for applications where high power must be transmitted. Single-mode fibers are used for most communication links longer than 1,000 meters. Being able to join optical fibers with low loss is important in fiber optic communication; this is more complex than joining electrical wire or cable and involves careful cleaving of the fibers, precise alignment of the fiber cores, the coupling of these aligned cores. For applications that demand a permanent connection a fusion splice is common. In this technique, an electric arc is used to melt the ends of the fibers together. Another common technique is a mechanical splice, where the ends of the fibers are held in contact by mechanical force. Temporary or semi-permanent connections are made by means of specialized optical fiber connectors; the field of applied science and engineering concerned with the design and application of optical fibers is known as fiber optics.
The term was coined by Indian physicist Narinder Singh Kapany, acknowledged as the father of fiber optics. Guiding of light by refraction, the principle that makes fiber optics possible, was first demonstrated by Daniel Colladon and Jacques Babinet in Paris in the early 1840s. John Tyndall included a demonstration of it in his public lectures in London, 12 years later. Tyndall wrote about the property of total internal reflection in an introductory book about the nature of light in 1870:When the light passes from air into water, the refracted ray is bent towards the perpendicular... When the ray passes from water to air it is bent from the perpendicular... If the angle which the ray in water encloses with the perpendicular to the surface be greater than 48 degrees, the ray will not quit the water at all: it will be reflected at the surface.... The angle which marks the limit where total reflection begins is called the limiting angle of the medium. For water this angle is 48°27′, for flint glass it is 38°41′, while for diamond it is 23°42′.
In the late 19th and early 20th centuries, light was guided through bent glass rods to illuminate body cavities. Practical applications such as close internal illumination during dentistry appeared early in the twentieth century. Image transmission through tubes was demonstrated independently by the radio experimenter Clarence Hansell and the television pioneer John Logie Baird in the 1920s. In the 1930s, Heinrich Lamm showed that one could transmit images through a bundle of unclad optical fibers and used it for internal medical examinations, but his work was forgotten. In 1953, Dutch scientist Bram van Heel first demonstrated image transmission through bundles of optical fibers with a transparent cladding; that same year, Harold Hopkins and Narinder Singh Kapany at Imperial College in London succeeded in making image-transmitting bundles with over 10,000 fibers, subsequently achieved image transmission through a 75 cm long bundle which combined several thousand fibers. Their article titled "A flexible fibrescope, using static scanning" was published in the journal Nature in 1954.
The first practical fiber optic semi-flexible gastroscope was patented by Basil Hirschowitz, C. Wilbur Peters, Lawrence E. Curtiss, researchers at the University of Michigan, in 1956. In the process of developing the gastroscope, Curtiss produced the first glass-clad fibers. A variety of other image transmission applications soon followed. Kapany coined the term fiber optics, wrote a 1960 article in Scientific American that introduced the topic to a wide audience, wrote the first book about the new field; the first working fiber-optical data transmission system was demonstrated by German physicist Manfred Börner at Telefunken Research Labs in Ulm in 1965, followed by the first patent application for this technology in 1966. NASA used fiber optics in the television cameras. At the time, the use in the cameras was classified confidential, employees handling the cameras had to be supervised by someone with an appropriate security clearance. Charles K. Kao and George A. Hockham of the British company Standard Telephones and Cables were the first, in 1965, to promote the idea that the attenuation in optical fibers could be reduced below 20 decibels per kilometer, making fibers a practical communication medium.
They proposed th
A waveguide is a structure that guides waves, such as electromagnetic waves or sound, with minimal loss of energy by restricting expansion to one dimension or two. There is a similar effect in water waves constrained within a canal, or guns that have barrels which restrict hot gas expansion to maximize energy transfer to their bullets. Without the physical constraint of a waveguide, wave amplitudes decrease according to the inverse square law as they expand into three dimensional space. There are different types of waveguides for each type of wave; the original and most common meaning is a hollow conductive metal pipe used to carry high frequency radio waves microwaves. The geometry of a waveguide reflects its function. Slab waveguides confine energy in one fiber or channel waveguides in two dimensions; the frequency of the transmitted wave dictates the shape of a waveguide: an optical fiber guiding high-frequency light will not guide microwaves of a much lower frequency. Some occurring structures can act as waveguides.
The SOFAR channel layer in the ocean can guide the sound of whale song across enormous distances. Waves propagate in all directions in open space as spherical waves; the power of the wave falls with the distance R from the source as the square of the distance. A waveguide confines the wave to propagate in one dimension, so that, under ideal conditions, the wave loses no power while propagating. Due to total reflection at the walls, waves are confined to the interior of a waveguide; the uses of waveguides for transmitting signals were known before the term was coined. The phenomenon of sound waves guided through a taut wire have been known for a long time, as well as sound through a hollow pipe such as a cave or medical stethoscope. Other uses of waveguides are in transmitting power between the components of a system such as radio, radar or optical devices. Waveguides are the fundamental principle of guided wave testing, one of the many methods of non-destructive evaluation. Specific examples: Optical fibers transmit light and signals for long distances with low attenuation and a wide usable range of wavelengths.
In a microwave oven a waveguide transfers power from the magnetron, where waves are formed, to the cooking chamber. In a radar, a waveguide transfers radio frequency energy to and from the antenna, where the impedance needs to be matched for efficient power transmission. Rectangular and Circular waveguides are used to connect feeds of parabolic dishes to their electronics, either low-noise receivers or power amplifier/transmitters. Waveguides are used in scientific instruments to measure optical and elastic properties of materials and objects; the waveguide can be put in contact with the specimen, in which case the waveguide ensures that the power of the testing wave is conserved, or the specimen may be put inside the waveguide, so that smaller objects can be tested and the accuracy is better. Transmission lines are a specific type of waveguide commonly used; the first structure for guiding waves was proposed by J. J. Thomson in 1893, was first experimentally tested by Oliver Lodge in 1894; the first mathematical analysis of electromagnetic waves in a metal cylinder was performed by Lord Rayleigh in 1897.
For sound waves, Lord Rayleigh published a full mathematical analysis of propagation modes in his seminal work, “The Theory of Sound”. Jagadish Chandra Bose researched millimetre wavelengths using waveguides, in 1897 described to the Royal Institution in London his research carried out in Kolkata; the study of dielectric waveguides began as early as the 1920s, by several people, most famous of which are Rayleigh and Debye. Optical fiber began to receive special attention in the 1960s due to its importance to the communications industry; the development of radio communication occurred at the lower frequencies because these could be more propagated over large distances. The long wavelengths made these frequencies unsuitable for use in hollow metal waveguides because of the impractically large diameter tubes required. Research into hollow metal waveguides stalled and the work of Lord Rayleigh was forgotten for a time and had to be rediscovered by others. Practical investigations resumed in the 1930s by George C.
Southworth at Bell Labs and Wilmer L. Barrow at MIT. Southworth at first took the theory from papers on waves in dielectric rods because the work of Lord Rayleigh was unknown to him; this misled him somewhat. Serious theoretical work was taken up by Sallie P. Mead; this work led to the discovery that for the TE01 mode in circular waveguide losses go down with frequency and at one time this was a serious contender for the format for long distance telecommunications. The importance of radar in World War II gave a great impetus to waveguide research, at least on the Allied side; the magnetron developed in 1940 by John Randall and Harry Boot at the University of Birmingham in the United Kingdom provided a good power source and made microwave radars feasible. The most important centre of US research was at the Radiation Laboratory at MIT but many others took part in the US, in the UK such as the Telecommunications Research Establishment; the head of the Fundamental Development Group at Rad Lab was Edward Mills Purcell.
His researchers included Julian Schwinger, Nathan Marcuvitz, Carol Gray Montgomery, Robert H. Dicke. Much of the Rad Lab work concentrated on finding lumped element models of waveguide
In physics, power is the rate of doing work or of transferring heat, i.e. the amount of energy transferred or converted per unit time. Having no direction, it is a scalar quantity. In the International System of Units, the unit of power is the joule per second, known as the watt in honour of James Watt, the eighteenth-century developer of the condenser steam engine. Another common and traditional measure is horsepower. Being the rate of work, the equation for power can be written: power = work time As a physical concept, power requires both a change in the physical system and a specified time in which the change occurs; this is distinct from the concept of work, only measured in terms of a net change in the state of the physical system. The same amount of work is done when carrying a load up a flight of stairs whether the person carrying it walks or runs, but more power is needed for running because the work is done in a shorter amount of time; the output power of an electric motor is the product of the torque that the motor generates and the angular velocity of its output shaft.
The power involved in moving a vehicle is the product of the traction force of the wheels and the velocity of the vehicle. The rate at which a light bulb converts electrical energy into light and heat is measured in watts—the higher the wattage, the more power, or equivalently the more electrical energy is used per unit time; the dimension of power is energy divided by time. The SI unit of power is the watt, equal to one joule per second. Other units of power include ergs per second, metric horsepower, foot-pounds per minute. One horsepower is equivalent to 33,000 foot-pounds per minute, or the power required to lift 550 pounds by one foot in one second, is equivalent to about 746 watts. Other units include a logarithmic measure relative to a reference of 1 milliwatt. Power, as a function of time, is the rate at which work is done, so can be expressed by this equation: P = d W d t where P is power, W is work, t is time; because work is a force F applied over a distance x, W = F ⋅ x for a constant force, power can be rewritten as: P = d W d t = d d t = F ⋅ d x d t = F ⋅ v In fact, this is valid for any force, as a consequence of applying the fundamental theorem of calculus.
As a simple example, burning one kilogram of coal releases much more energy than does detonating a kilogram of TNT, but because the TNT reaction releases energy much more it delivers far more power than the coal. If ΔW is the amount of work performed during a period of time of duration Δt, the average power Pavg over that period is given by the formula P a v g = Δ W Δ t, it is the average amount of energy converted per unit of time. The average power is simply called "power" when the context makes it clear; the instantaneous power is the limiting value of the average power as the time interval Δt approaches zero. P = lim Δ t → 0 P a v g = lim Δ t → 0 Δ W Δ t = d W d t. In the case of constant power P, the amount of work performed during a period of duration t is given by: W = P t. In the context of energy conversion, it is more customary to use the symbol E rather than W. Power in mechanical systems is the combination of forces and movement. In particular, power is the product of a force on an object and the object's velocity, or the product of a torque on a shaft and the shaft's angular velocity.
Mechanical power is described as the time derivative of work. In mechanics, the work done by a force F on an object that travels along a curve C is given by the line integral: W C = ∫ C F ⋅ v d t = ∫ C F ⋅ d x, where x defines the path C and v is the velocity along this path. If the force F is derivable from a potential applying the gradi
New York City
The City of New York called either New York City or New York, is the most populous city in the United States. With an estimated 2017 population of 8,622,698 distributed over a land area of about 302.6 square miles, New York is the most densely populated major city in the United States. Located at the southern tip of the state of New York, the city is the center of the New York metropolitan area, the largest metropolitan area in the world by urban landmass and one of the world's most populous megacities, with an estimated 20,320,876 people in its 2017 Metropolitan Statistical Area and 23,876,155 residents in its Combined Statistical Area. A global power city, New York City has been described as the cultural and media capital of the world, exerts a significant impact upon commerce, research, education, tourism, art and sports; the city's fast pace has inspired the term New York minute. Home to the headquarters of the United Nations, New York is an important center for international diplomacy.
Situated on one of the world's largest natural harbors, New York City consists of five boroughs, each of, a separate county of the State of New York. The five boroughs – Brooklyn, Manhattan, The Bronx, Staten Island – were consolidated into a single city in 1898; the city and its metropolitan area constitute the premier gateway for legal immigration to the United States. As many as 800 languages are spoken in New York, making it the most linguistically diverse city in the world. New York City is home to more than 3.2 million residents born outside the United States, the largest foreign-born population of any city in the world. In 2017, the New York metropolitan area produced a gross metropolitan product of US$1.73 trillion. If greater New York City were a sovereign state, it would have the 12th highest GDP in the world. New York is home to the highest number of billionaires of any city in the world. New York City traces its origins to a trading post founded by colonists from the Dutch Republic in 1624 on Lower Manhattan.
The city and its surroundings came under English control in 1664 and were renamed New York after King Charles II of England granted the lands to his brother, the Duke of York. New York served as the capital of the United States from 1785 until 1790, it has been the country's largest city since 1790. The Statue of Liberty greeted millions of immigrants as they came to the U. S. by ship in the late 19th and early 20th centuries and is an international symbol of the U. S. and its ideals of liberty and peace. In the 21st century, New York has emerged as a global node of creativity and entrepreneurship, social tolerance, environmental sustainability, as a symbol of freedom and cultural diversity. Many districts and landmarks in New York City are well known, with the city having three of the world's ten most visited tourist attractions in 2013 and receiving a record 62.8 million tourists in 2017. Several sources have ranked New York the most photographed city in the world. Times Square, iconic as the world's "heart" and its "Crossroads", is the brightly illuminated hub of the Broadway Theater District, one of the world's busiest pedestrian intersections, a major center of the world's entertainment industry.
The names of many of the city's landmarks and parks are known around the world. Manhattan's real estate market is among the most expensive in the world. New York is home to the largest ethnic Chinese population outside of Asia, with multiple signature Chinatowns developing across the city. Providing continuous 24/7 service, the New York City Subway is the largest single-operator rapid transit system worldwide, with 472 rail stations. Over 120 colleges and universities are located in New York City, including Columbia University, New York University, Rockefeller University, which have been ranked among the top universities in the world. Anchored by Wall Street in the Financial District of Lower Manhattan, New York has been called both the most economically powerful city and the leading financial center of the world, the city is home to the world's two largest stock exchanges by total market capitalization, the New York Stock Exchange and NASDAQ. In 1664, the city was named in honor of the Duke of York.
James's older brother, King Charles II, had appointed the Duke proprietor of the former territory of New Netherland, including the city of New Amsterdam, which England had seized from the Dutch. During the Wisconsinan glaciation, 75,000 to 11,000 years ago, the New York City region was situated at the edge of a large ice sheet over 1,000 feet in depth; the erosive forward movement of the ice contributed to the separation of what is now Long Island and Staten Island. That action left bedrock at a shallow depth, providing a solid foundation for most of Manhattan's skyscrapers. In the precolonial era, the area of present-day New York City was inhabited by Algonquian Native Americans, including the Lenape, whose homeland, known as Lenapehoking, included Staten Island; the first documented visit into New York Harbor by a European was in 1524 by Giovanni da Verrazzano, a Florentine explorer in the service of the French crown. He named it Nouvelle Angoulême. A Spanish expedition led by captain Estêvão Gomes, a Portuguese sailing for Emperor Charles V, arrived in New York Harbor in January 1525 and charted the mouth of the Hudson River, which he named Río de San Antonio.
The Padrón Rea