Arabic is a Central Semitic language that first emerged in Iron Age northwestern Arabia and is now the lingua franca of the Arab world. It is named after the Arabs, a term used to describe peoples living in the area bounded by Mesopotamia in the east and the Anti-Lebanon mountains in the west, in northwestern Arabia, in the Sinai Peninsula. Arabic is classified as a macrolanguage comprising 30 modern varieties, including its standard form, Modern Standard Arabic, derived from Classical Arabic; as the modern written language, Modern Standard Arabic is taught in schools and universities, is used to varying degrees in workplaces and the media. The two formal varieties are grouped together as Literary Arabic, the official language of 26 states, the liturgical language of the religion of Islam, since the Quran and Hadith were written in Arabic. Modern Standard Arabic follows the grammatical standards of Classical Arabic, uses much of the same vocabulary. However, it has discarded some grammatical constructions and vocabulary that no longer have any counterpart in the spoken varieties, has adopted certain new constructions and vocabulary from the spoken varieties.
Much of the new vocabulary is used to denote concepts that have arisen in the post-classical era in modern times. Due to its grounding in Classical Arabic, Modern Standard Arabic is removed over a millennium from everyday speech, construed as a multitude of dialects of this language; these dialects and Modern Standard Arabic are described by some scholars as not mutually comprehensible. The former are acquired in families, while the latter is taught in formal education settings. However, there have been studies reporting some degree of comprehension of stories told in the standard variety among preschool-aged children; the relation between Modern Standard Arabic and these dialects is sometimes compared to that of Latin and vernaculars in medieval and early modern Europe. This view though does not take into account the widespread use of Modern Standard Arabic as a medium of audiovisual communication in today's mass media—a function Latin has never performed. During the Middle Ages, Literary Arabic was a major vehicle of culture in Europe in science and philosophy.
As a result, many European languages have borrowed many words from it. Arabic influence in vocabulary, is seen in European languages Spanish and to a lesser extent Portuguese, Catalan, owing to both the proximity of Christian European and Muslim Arab civilizations and 800 years of Arabic culture and language in the Iberian Peninsula, referred to in Arabic as al-Andalus. Sicilian has about 500 Arabic words as result of Sicily being progressively conquered by Arabs from North Africa, from the mid-9th to mid-10th centuries. Many of these words relate to related activities; the Balkan languages, including Greek and Bulgarian, have acquired a significant number of Arabic words through contact with Ottoman Turkish. Arabic has influenced many languages around the globe throughout its history; some of the most influenced languages are Persian, Spanish, Kashmiri, Bosnian, Bengali, Malay, Indonesian, Punjabi, Assamese, Sindhi and Hausa, some languages in parts of Africa. Conversely, Arabic has borrowed words from other languages, including Greek and Persian in medieval times, contemporary European languages such as English and French in modern times.
Classical Arabic is the liturgical language of 1.8 billion Muslims, Modern Standard Arabic is one of six official languages of the United Nations. All varieties of Arabic combined are spoken by as many as 422 million speakers in the Arab world, making it the fifth most spoken language in the world. Arabic is written with the Arabic alphabet, an abjad script and is written from right to left, although the spoken varieties are sometimes written in ASCII Latin from left to right with no standardized orthography. Arabic is a Central Semitic language related to the Northwest Semitic languages, the Ancient South Arabian languages, various other Semitic languages of Arabia such as Dadanitic; the Semitic languages changed a great deal between Proto-Semitic and the establishment of the Central Semitic languages in grammar. Innovations of the Central Semitic languages—all maintained in Arabic—include: The conversion of the suffix-conjugated stative formation into a past tense; the conversion of the prefix-conjugated preterite-tense formation into a present tense.
The elimination of other prefix-conjugated mood/aspect forms in favor of new moods formed by endings attached to the prefix-conjugation forms. The development of an internal passive. There are several features which Classical Arabic, the modern Arabic varieties, as well as the Safaitic and Hismaic inscriptions share which are unattested in any other Central Semitic language variety, including the Dadanitic and Taymanitic languages of the northern Hejaz; these features are evidence of common descent from Proto-Arabic. The following features can be reconstructed with confidence for Proto-Arabic: negative particles m *mā.
A star catalogue or star catalog, is an astronomical catalogue that lists stars. In astronomy, many stars are referred to by catalogue numbers. There are a great many different star catalogues which have been produced for different purposes over the years, this article covers only some of the more quoted ones. Star catalogues were compiled by many different ancient people, including the Babylonians, Chinese and Arabs, they were sometimes accompanied by a star chart for illustration. Most modern catalogues are available in electronic format and can be downloaded from space agencies data centres. Completeness and accuracy is described by the weakest apparent magnitude V and the accuracy of the positions. From their existing records, it is known that the ancient Egyptians recorded the names of only a few identifiable constellations and a list of thirty-six decans that were used as a star clock; the Egyptians called the circumpolar star "the star that cannot perish" and, although they made no known formal star catalogues, they nonetheless created extensive star charts of the night sky which adorn the coffins and ceilings of tomb chambers.
Although the ancient Sumerians were the first to record the names of constellations on clay tablets, the earliest known star catalogues were compiled by the ancient Babylonians of Mesopotamia in the late 2nd millennium BC, during the Kassite Period. They are better known by their Assyrian-era name'Three Stars Each'; these star catalogues, written on clay tablets, listed thirty-six stars: twelve for "Anu" along the celestial equator, twelve for "Ea" south of that, twelve for "Enlil" to the north. The Mul. Apin lists, dated to sometime before the Neo-Babylonian Empire, are direct textual descendants of the "Three Stars Each" lists and their constellation patterns show similarities to those of Greek civilization. In Ancient Greece, the astronomer and mathematician Eudoxus laid down a full set of the classical constellations around 370 BC, his catalogue Phaenomena, rewritten by Aratus of Soli between 275 and 250 BC as a didactic poem, became one of the most consulted astronomical texts in antiquity and beyond.
It contains descriptions of the positions of the stars, the shapes of the constellations and provided information on their relative times of rising and setting. In the 3rd century BC, the Greek astronomers Timocharis of Alexandria and Aristillus created another star catalogue. Hipparchus completed his star catalogue in 129 BC, which he compared to Timocharis' and discovered that the longitude of the stars had changed over time; this led him to determine the first value of the precession of the equinoxes. In the 2nd century, Ptolemy of Roman Egypt published a star catalogue as part of his Almagest, which listed 1,022 stars visible from Alexandria. Ptolemy's catalogue was based entirely on an earlier one by Hipparchus, it remained the standard star catalogue in the Arab worlds for over eight centuries. The Islamic astronomer al-Sufi updated it in 964, the star positions were redetermined by Ulugh Beg in 1437, but it was not superseded until the appearance of the thousand-star catalogue of Tycho Brahe in 1598.
Although the ancient Vedas of India specified how the ecliptic was to be divided into twenty-eight nakshatra, Indian constellation patterns were borrowed from Greek ones sometime after Alexander's conquests in Asia in the 4th century BC. The earliest known inscriptions for Chinese star names were written on oracle bones and date to the Shang Dynasty. Sources dating from the Zhou Dynasty which provide star names include the Zuo Zhuan, the Shi Jing, the "Canon of Yao" in the Book of Documents; the Lüshi Chunqiu written by the Qin statesman Lü Buwei provides most of the names for the twenty-eight mansions. An earlier lacquerware chest found in the Tomb of Marquis Yi of Zeng contains a complete list of the names of the twenty-eight mansions. Star catalogues are traditionally attributed to Shi Shen and Gan De, two rather obscure Chinese astronomers who may have been active in the 4th century BC of the Warring States period; the Shi Shen astronomy is attributed to Shi Shen, the Astronomic star observation to Gan De.
It was not until the Han Dynasty that astronomers started to observe and record names for all the stars that were apparent in the night sky, not just those around the ecliptic. A star catalogue is featured in one of the chapters of the late 2nd-century-BC history work Records of the Grand Historian by Sima Qian and contains the "schools" of Shi Shen and Gan De's work. Sima's catalogue—the Book of Celestial Offices —includes some 90 constellations, the stars therein named after temples, ideas in philosophy, locations such as markets and shops, different people such as farmers and soldiers. For his Spiritual Constitution of the Universe of 120 AD, the astronomer Zhang Heng compiled a star catalogue comprising 124 constellations. Chinese constellation names were adopted by the Koreans and Japanese. A large number of star catalogues were published by Muslim astronomers in the medieval Islamic world; these were Zij treatises, including Arzachel's Tables of Toledo, the Maragheh observatory's Zij-i Ilkhani and Ulugh Beg's Zij-i-Sultani.
The Kelvin scale is an absolute thermodynamic temperature scale using as its null point absolute zero, the temperature at which all thermal motion ceases in the classical description of thermodynamics. The kelvin is the base unit of temperature in the International System of Units; until 2018, the kelvin was defined as the fraction 1/273.16 of the thermodynamic temperature of the triple point of water. In other words, it was defined such that the triple point of water is 273.16 K. On 16 November 2018, a new definition was adopted, in terms of a fixed value of the Boltzmann constant. For legal metrology purposes, the new definition will come into force on 20 May 2019; the Kelvin scale is named after the Belfast-born, Glasgow University engineer and physicist William Thomson, 1st Baron Kelvin, who wrote of the need for an "absolute thermometric scale". Unlike the degree Fahrenheit and degree Celsius, the kelvin is not referred to or written as a degree; the kelvin is the primary unit of temperature measurement in the physical sciences, but is used in conjunction with the degree Celsius, which has the same magnitude.
The definition implies that absolute zero is equivalent to −273.15 °C. In 1848, William Thomson, made Lord Kelvin, wrote in his paper, On an Absolute Thermometric Scale, of the need for a scale whereby "infinite cold" was the scale's null point, which used the degree Celsius for its unit increment. Kelvin calculated; this absolute scale is known today as the Kelvin thermodynamic temperature scale. Kelvin's value of "−273" was the negative reciprocal of 0.00366—the accepted expansion coefficient of gas per degree Celsius relative to the ice point, giving a remarkable consistency to the accepted value. In 1954, Resolution 3 of the 10th General Conference on Weights and Measures gave the Kelvin scale its modern definition by designating the triple point of water as its second defining point and assigned its temperature to 273.16 kelvins. In 1967/1968, Resolution 3 of the 13th CGPM renamed the unit increment of thermodynamic temperature "kelvin", symbol K, replacing "degree Kelvin", symbol °K. Furthermore, feeling it useful to more explicitly define the magnitude of the unit increment, the 13th CGPM held in Resolution 4 that "The kelvin, unit of thermodynamic temperature, is equal to the fraction 1/273.16 of the thermodynamic temperature of the triple point of water."In 2005, the Comité International des Poids et Mesures, a committee of the CGPM, affirmed that for the purposes of delineating the temperature of the triple point of water, the definition of the Kelvin thermodynamic temperature scale would refer to water having an isotopic composition specified as Vienna Standard Mean Ocean Water.
In 2018, Resolution A of the 26th CGPM adopted a significant redefinition of SI base units which included redefining the Kelvin in terms of a fixed value for the Boltzmann constant of 1.380649×10−23 J/K. When spelled out or spoken, the unit is pluralised using the same grammatical rules as for other SI units such as the volt or ohm; when reference is made to the "Kelvin scale", the word "kelvin"—which is a noun—functions adjectivally to modify the noun "scale" and is capitalized. As with most other SI unit symbols there is a space between the kelvin symbol. Before the 13th CGPM in 1967–1968, the unit kelvin was called a "degree", the same as with the other temperature scales at the time, it was distinguished from the other scales with either the adjective suffix "Kelvin" or with "absolute" and its symbol was °K. The latter term, the unit's official name from 1948 until 1954, was ambiguous since it could be interpreted as referring to the Rankine scale. Before the 13th CGPM, the plural form was "degrees absolute".
The 13th CGPM changed the unit name to "kelvin". The omission of "degree" indicates that it is not relative to an arbitrary reference point like the Celsius and Fahrenheit scales, but rather an absolute unit of measure which can be manipulated algebraically. In science and engineering, degrees Celsius and kelvins are used in the same article, where absolute temperatures are given in degrees Celsius, but temperature intervals are given in kelvins. E.g. "its measured value was 0.01028 °C with an uncertainty of 60 µK." This practice is permissible because the degree Celsius is a special name for the kelvin for use in expressing relative temperatures, the magnitude of the degree Celsius is equal to that of the kelvin. Notwithstanding that the official endorsement provided by Resolution 3 of the 13th CGPM states "a temperature interval may be expressed in degrees Celsius", the practice of using both °C and K is widespread throughout the scientific world; the use of SI prefixed forms of the degree Celsius to express a temperature interval has not been adopted.
In 2005 the CIPM embarked on a programme to redefine the kelvin using a more experimentally rigorous methodology. In particular, the committee proposed redefining the kelvin such that Boltzmann's constant takes the exact value 1.3806505×10−23 J/K. The committee had hoped tha
SIMBAD is an astronomical database of objects beyond the Solar System. It is maintained by the Centre de données astronomiques de France. SIMBAD was created by merging the Catalog of Stellar Identifications and the Bibliographic Star Index as they existed at the Meudon Computer Centre until 1979, expanded by additional source data from other catalogues and the academic literature; the first on-line interactive version, known as Version 2, was made available in 1981. Version 3, developed in the C language and running on UNIX stations at the Strasbourg Observatory, was released in 1990. Fall of 2006 saw the release of Version 4 of the database, now stored in PostgreSQL, the supporting software, now written in Java; as of 10 February 2017, SIMBAD contains information for 9,099,070 objects under 24,529,080 different names, with 327,634 bibliographical references and 15,511,733 bibliographic citations. The minor planet 4692 SIMBAD was named in its honour. Planetary Data System – NASA's database of information on SSSB, maintained by JPL and Caltech.
NASA/IPAC Extragalactic Database – a database of information on objects outside the Milky Way maintained by JPL. NASA Exoplanet Archive – an online astronomical exoplanet catalog and data service Bibcode SIMBAD, Strasbourg SIMBAD, Harvard
The parsec is a unit of length used to measure large distances to astronomical objects outside the Solar System. A parsec is defined as the distance at which one astronomical unit subtends an angle of one arcsecond, which corresponds to 648000/π astronomical units. One parsec is equal to 31 trillion kilometres or 19 trillion miles; the nearest star, Proxima Centauri, is about 1.3 parsecs from the Sun. Most of the stars visible to the unaided eye in the night sky are within 500 parsecs of the Sun; the parsec unit was first suggested in 1913 by the British astronomer Herbert Hall Turner. Named as a portmanteau of the parallax of one arcsecond, it was defined to make calculations of astronomical distances from only their raw observational data quick and easy for astronomers. For this reason, it is the unit preferred in astronomy and astrophysics, though the light-year remains prominent in popular science texts and common usage. Although parsecs are used for the shorter distances within the Milky Way, multiples of parsecs are required for the larger scales in the universe, including kiloparsecs for the more distant objects within and around the Milky Way, megaparsecs for mid-distance galaxies, gigaparsecs for many quasars and the most distant galaxies.
In August 2015, the IAU passed Resolution B2, which, as part of the definition of a standardized absolute and apparent bolometric magnitude scale, mentioned an existing explicit definition of the parsec as 648000/π astronomical units, or 3.08567758149137×1016 metres. This corresponds to the small-angle definition of the parsec found in many contemporary astronomical references; the parsec is defined as being equal to the length of the longer leg of an elongated imaginary right triangle in space. The two dimensions on which this triangle is based are its shorter leg, of length one astronomical unit, the subtended angle of the vertex opposite that leg, measuring one arc second. Applying the rules of trigonometry to these two values, the unit length of the other leg of the triangle can be derived. One of the oldest methods used by astronomers to calculate the distance to a star is to record the difference in angle between two measurements of the position of the star in the sky; the first measurement is taken from the Earth on one side of the Sun, the second is taken half a year when the Earth is on the opposite side of the Sun.
The distance between the two positions of the Earth when the two measurements were taken is twice the distance between the Earth and the Sun. The difference in angle between the two measurements is twice the parallax angle, formed by lines from the Sun and Earth to the star at the distant vertex; the distance to the star could be calculated using trigonometry. The first successful published direct measurements of an object at interstellar distances were undertaken by German astronomer Friedrich Wilhelm Bessel in 1838, who used this approach to calculate the 3.5-parsec distance of 61 Cygni. The parallax of a star is defined as half of the angular distance that a star appears to move relative to the celestial sphere as Earth orbits the Sun. Equivalently, it is the subtended angle, from that star's perspective, of the semimajor axis of the Earth's orbit; the star, the Sun and the Earth form the corners of an imaginary right triangle in space: the right angle is the corner at the Sun, the corner at the star is the parallax angle.
The length of the opposite side to the parallax angle is the distance from the Earth to the Sun (defined as one astronomical unit, the length of the adjacent side gives the distance from the sun to the star. Therefore, given a measurement of the parallax angle, along with the rules of trigonometry, the distance from the Sun to the star can be found. A parsec is defined as the length of the side adjacent to the vertex occupied by a star whose parallax angle is one arcsecond; the use of the parsec as a unit of distance follows from Bessel's method, because the distance in parsecs can be computed as the reciprocal of the parallax angle in arcseconds. No trigonometric functions are required in this relationship because the small angles involved mean that the approximate solution of the skinny triangle can be applied. Though it may have been used before, the term parsec was first mentioned in an astronomical publication in 1913. Astronomer Royal Frank Watson Dyson expressed his concern for the need of a name for that unit of distance.
He proposed the name astron, but mentioned that Carl Charlier had suggested siriometer and Herbert Hall Turner had proposed parsec. It was Turner's proposal. In the diagram above, S represents the Sun, E the Earth at one point in its orbit, thus the distance ES is one astronomical unit. The angle SDE is one arcsecond so by definition D is a point in space at a distance of one parsec from the Sun. Through trigonometry, the distance SD is calculated as follows: S D = E S tan 1 ″ S D ≈ E S 1 ″ = 1 au 1 60 × 60 × π
A star is type of astronomical object consisting of a luminous spheroid of plasma held together by its own gravity. The nearest star to Earth is the Sun. Many other stars are visible to the naked eye from Earth during the night, appearing as a multitude of fixed luminous points in the sky due to their immense distance from Earth; the most prominent stars were grouped into constellations and asterisms, the brightest of which gained proper names. Astronomers have assembled star catalogues that identify the known stars and provide standardized stellar designations. However, most of the estimated 300 sextillion stars in the Universe are invisible to the naked eye from Earth, including all stars outside our galaxy, the Milky Way. For at least a portion of its life, a star shines due to thermonuclear fusion of hydrogen into helium in its core, releasing energy that traverses the star's interior and radiates into outer space. All occurring elements heavier than helium are created by stellar nucleosynthesis during the star's lifetime, for some stars by supernova nucleosynthesis when it explodes.
Near the end of its life, a star can contain degenerate matter. Astronomers can determine the mass, age and many other properties of a star by observing its motion through space, its luminosity, spectrum respectively; the total mass of a star is the main factor. Other characteristics of a star, including diameter and temperature, change over its life, while the star's environment affects its rotation and movement. A plot of the temperature of many stars against their luminosities produces a plot known as a Hertzsprung–Russell diagram. Plotting a particular star on that diagram allows the age and evolutionary state of that star to be determined. A star's life begins with the gravitational collapse of a gaseous nebula of material composed of hydrogen, along with helium and trace amounts of heavier elements; when the stellar core is sufficiently dense, hydrogen becomes converted into helium through nuclear fusion, releasing energy in the process. The remainder of the star's interior carries energy away from the core through a combination of radiative and convective heat transfer processes.
The star's internal pressure prevents it from collapsing further under its own gravity. A star with mass greater than 0.4 times the Sun's will expand to become a red giant when the hydrogen fuel in its core is exhausted. In some cases, it will fuse heavier elements in shells around the core; as the star expands it throws a part of its mass, enriched with those heavier elements, into the interstellar environment, to be recycled as new stars. Meanwhile, the core becomes a stellar remnant: a white dwarf, a neutron star, or if it is sufficiently massive a black hole. Binary and multi-star systems consist of two or more stars that are gravitationally bound and move around each other in stable orbits; when two such stars have a close orbit, their gravitational interaction can have a significant impact on their evolution. Stars can form part of a much larger gravitationally bound structure, such as a star cluster or a galaxy. Stars have been important to civilizations throughout the world, they have used for celestial navigation and orientation.
Many ancient astronomers believed that stars were permanently affixed to a heavenly sphere and that they were immutable. By convention, astronomers grouped stars into constellations and used them to track the motions of the planets and the inferred position of the Sun; the motion of the Sun against the background stars was used to create calendars, which could be used to regulate agricultural practices. The Gregorian calendar used nearly everywhere in the world, is a solar calendar based on the angle of the Earth's rotational axis relative to its local star, the Sun; the oldest dated star chart was the result of ancient Egyptian astronomy in 1534 BC. The earliest known star catalogues were compiled by the ancient Babylonian astronomers of Mesopotamia in the late 2nd millennium BC, during the Kassite Period; the first star catalogue in Greek astronomy was created by Aristillus in 300 BC, with the help of Timocharis. The star catalog of Hipparchus included 1020 stars, was used to assemble Ptolemy's star catalogue.
Hipparchus is known for the discovery of the first recorded nova. Many of the constellations and star names in use today derive from Greek astronomy. In spite of the apparent immutability of the heavens, Chinese astronomers were aware that new stars could appear. In 185 AD, they were the first to observe and write about a supernova, now known as the SN 185; the brightest stellar event in recorded history was the SN 1006 supernova, observed in 1006 and written about by the Egyptian astronomer Ali ibn Ridwan and several Chinese astronomers. The SN 1054 supernova, which gave birth to the Crab Nebula, was observed by Chinese and Islamic astronomers. Medieval Islamic astronomers gave Arabic names to many stars that are still used today and they invented numerous astronomical instruments that could compute the positions of the stars, they built the first large observatory research institutes for the purpose of producing Zij star catalogues. Among these, the Book of Fixed Stars was written by the Persian astronomer Abd al-Rahman al-Sufi, who observed a number of stars, star clusters and galaxies.
According to A. Zahoor, in the 11th century, the Persian polymath scholar Abu Rayhan Biruni described the Milky
In astronomy, luminosity is the total amount of energy emitted per unit of time by a star, galaxy, or other astronomical object. As a term for energy emitted per unit time, luminosity is synonymous with power. In SI units luminosity is measured in joules per second or watts. Values for luminosity are given in the terms of the luminosity of the Sun, L⊙. Luminosity can be given in terms of the astronomical magnitude system: the absolute bolometric magnitude of an object is a logarithmic measure of its total energy emission rate, while absolute magnitude is a logarithmic measure of the luminosity within some specific wavelength range or filter band. In contrast, the term brightness in astronomy is used to refer to an object's apparent brightness: that is, how bright an object appears to an observer. Apparent brightness depends on both the luminosity of the object and the distance between the object and observer, on any absorption of light along the path from object to observer. Apparent magnitude is a logarithmic measure of apparent brightness.
The distance determined by luminosity measures can be somewhat ambiguous, is thus sometimes called the luminosity distance. In astronomy, luminosity is the amount of electromagnetic energy; when not qualified, the term "luminosity" means bolometric luminosity, measured either in the SI units, watts, or in terms of solar luminosities. A bolometer is the instrument used to measure radiant energy over a wide band by absorption and measurement of heating. A star radiates neutrinos, which carry off some energy, contributing to the star's total luminosity; the IAU has defined a nominal solar luminosity of 3.828×1026 W to promote publication of consistent and comparable values in units of the solar luminosity. While bolometers do exist, they cannot be used to measure the apparent brightness of a star because they are insufficiently sensitive across the electromagnetic spectrum and because most wavelengths do not reach the surface of the Earth. In practice bolometric magnitudes are measured by taking measurements at certain wavelengths and constructing a model of the total spectrum, most to match those measurements.
In some cases, the process of estimation is extreme, with luminosities being calculated when less than 1% of the energy output is observed, for example with a hot Wolf-Rayet star observed only in the infra-red. Bolometric luminosities can be calculated using a bolometric correction to a luminosity in a particular passband; the term luminosity is used in relation to particular passbands such as a visual luminosity of K-band luminosity. These are not luminosities in the strict sense of an absolute measure of radiated power, but absolute magnitudes defined for a given filter in a photometric system. Several different photometric systems exist; some such as the UBV or Johnson system are defined against photometric standard stars, while others such as the AB system are defined in terms of a spectral flux density. A star's luminosity can be determined from two stellar characteristics: size and effective temperature; the former is represented in terms of solar radii, R⊙, while the latter is represented in kelvins, but in most cases neither can be measured directly.
To determine a star's radius, two other metrics are needed: the star's angular diameter and its distance from Earth. Both can be measured with great accuracy in certain cases, with cool supergiants having large angular diameters, some cool evolved stars having masers in their atmospheres that can be used to measure the parallax using VLBI. However, for most stars the angular diameter or parallax, or both, are far below our ability to measure with any certainty. Since the effective temperature is a number that represents the temperature of a black body that would reproduce the luminosity, it cannot be measured directly, but it can be estimated from the spectrum. An alternative way to measure stellar luminosity is to measure the star's apparent brightness and distance. A third component needed to derive the luminosity is the degree of interstellar extinction, present, a condition that arises because of gas and dust present in the interstellar medium, the Earth's atmosphere, circumstellar matter.
One of astronomy's central challenges in determining a star's luminosity is to derive accurate measurements for each of these components, without which an accurate luminosity figure remains elusive. Extinction can only be measured directly if the actual and observed luminosities are both known, but it can be estimated from the observed colour of a star, using models of the expected level of reddening from the interstellar medium. In the current system of stellar classification, stars are grouped according to temperature, with the massive young and energetic Class O stars boasting temperatures in excess of 30,000 K while the less massive older Class M stars exhibit temperatures less than 3,500 K; because luminosity is proportional to temperature to the fourth power, the large variation in stellar temperatures produces an vaster variation in stellar luminosity. Because the luminosity depends on a high power of the stellar mass, high mass luminous stars have much shorter lifetimes; the most luminous stars are always young stars, no more than a few million years for the most extreme.
In the Hertzsprung–Russell diagram, the x-axis represents temperature or spectral type while the y-axis represents luminosity or magnitude. The vast majority of stars are found along the main sequence with blue Class O stars found at the top left of the chart while red Class M stars fall to the bottom right. Certain stars like Deneb and Betelgeuse are