In mathematics and chemistry, a space group is the symmetry group of a configuration in space in three dimensions. In three dimensions, there are 230 if chiral copies are considered distinct. Space groups are studied in dimensions other than 3 where they are sometimes called Bieberbach groups, are discrete cocompact groups of isometries of an oriented Euclidean space. In crystallography, space groups are called the crystallographic or Fedorov groups, represent a description of the symmetry of the crystal. A definitive source regarding 3-dimensional space groups is the International Tables for Crystallography. Space groups in 2 dimensions are the 17 wallpaper groups which have been known for several centuries, though the proof that the list was complete was only given in 1891, after the much more difficult classification of space groups had been completed. In 1879 Leonhard Sohncke listed the 65 space groups. More he listed 66 groups, but Fedorov and Schönflies both noticed that two of them were the same.
The space groups in three dimensions were first enumerated by Fedorov, shortly afterwards were independently enumerated by Schönflies. The correct list of 230 space groups was found by 1892 during correspondence between Fedorov and Schönflies. Barlow enumerated the groups with a different method, but omitted four groups though he had the correct list of 230 groups from Fedorov and Schönflies. Burckhardt describes the history of the discovery of the space groups in detail; the space groups in three dimensions are made from combinations of the 32 crystallographic point groups with the 14 Bravais lattices, each of the latter belonging to one of 7 lattice systems. This results in a space group being some combination of the translational symmetry of a unit cell including lattice centering, the point group symmetry operations of reflection and improper rotation, the screw axis and glide plane symmetry operations; the combination of all these symmetry operations results in a total of 230 different space groups describing all possible crystal symmetries.
The elements of the space group fixing a point of space are the identity element, reflections and improper rotations. The translations form a normal abelian subgroup of rank 3, called the Bravais lattice. There are 14 possible types of Bravais lattice; the quotient of the space group by the Bravais lattice is a finite group, one of the 32 possible point groups. Translation is defined as the face moves from one point to another point. A glide plane is a reflection in a plane, followed by a translation parallel with that plane; this is noted depending on which axis the glide is along. There is the n glide, a glide along the half of a diagonal of a face, the d glide, a fourth of the way along either a face or space diagonal of the unit cell; the latter is called the diamond glide plane. In 17 space groups, due to the centering of the cell, the glides occur in two perpendicular directions i.e. the same glide plane can be called b or c, a or b, a or c. For example, group Abm2 could be called Acm2, group Ccca could be called Cccb.
In 1992, it was suggested to use symbol e for such planes. The symbols for five space groups have been modified: A screw axis is a rotation about an axis, followed by a translation along the direction of the axis; these are noted by a number, n, to describe the degree of rotation, where the number is how many operations must be applied to complete a full rotation. The degree of translation is added as a subscript showing how far along the axis the translation is, as a portion of the parallel lattice vector. So, 21 is a twofold rotation followed by a translation of 1/2 of the lattice vector; the general formula for the action of an element of a space group is y = M.x + D where M is its matrix, D is its vector, where the element transforms point x into point y. In general, D = D + D, where D is a unique function of M, zero for M being the identity; the matrices M form a point group, a basis of the space group. The lattice dimension can be less than the overall dimension, resulting in a "subperiodic" space group.
For:: One-dimensional line groups: Two-dimensional line groups: frieze groups: Wallpaper groups: Three-dimensional line groups. Some of these methods can assign several different names to the same space group, so altogether there are many thousands of different names. Number; the International Union of Crystallography publishes tables of all space group types, assigns each a unique number from 1 to 230. The numbering is arbitrary, except that groups with the same crystal system or point group are given consecutive numbers. International symbol or Hermann–Mauguin notation; the Hermann–Mauguin notation describes the lattice and some generators for the group. It has a shortened form called the international short symbol, the one most used in crystallography
An acid is a molecule or ion capable of donating a hydron, or, capable of forming a covalent bond with an electron pair. The first category of acids is the proton donors or Brønsted acids. In the special case of aqueous solutions, proton donors form the hydronium ion H3O+ and are known as Arrhenius acids. Brønsted and Lowry generalized the Arrhenius theory to include non-aqueous solvents. A Brønsted or Arrhenius acid contains a hydrogen atom bonded to a chemical structure, still energetically favorable after loss of H+. Aqueous Arrhenius acids have characteristic properties which provide a practical description of an acid. Acids form aqueous solutions with a sour taste, can turn blue litmus red, react with bases and certain metals to form salts; the word acid is derived from the Latin acidus/acēre meaning sour. An aqueous solution of an acid has a pH less than 7 and is colloquially referred to as'acid', while the strict definition refers only to the solute. A lower pH means a higher acidity, thus a higher concentration of positive hydrogen ions in the solution.
Chemicals or substances having the property of an acid are said to be acidic. Common aqueous acids include hydrochloric acid, acetic acid, sulfuric acid, citric acid; as these examples show, acids can be solutions or pure substances, can be derived from acids that are solids, liquids, or gases. Strong acids and some concentrated weak acids are corrosive, but there are exceptions such as carboranes and boric acid; the second category of acids are Lewis acids. An example is boron trifluoride, whose boron atom has a vacant orbital which can form a covalent bond by sharing a lone pair of electrons on an atom in a base, for example the nitrogen atom in ammonia. Lewis considered this as a generalization of the Brønsted definition, so that an acid is a chemical species that accepts electron pairs either directly or by releasing protons into the solution, which accept electron pairs. However, hydrogen chloride, acetic acid, most other Brønsted-Lowry acids cannot form a covalent bond with an electron pair and are therefore not Lewis acids.
Conversely, many Lewis acids are not Brønsted-Lowry acids. In modern terminology, an acid is implicitly a Brønsted acid and not a Lewis acid, since chemists always refer to a Lewis acid explicitly as a Lewis acid. Modern definitions are concerned with the fundamental chemical reactions common to all acids. Most acids encountered in everyday life are aqueous solutions, or can be dissolved in water, so the Arrhenius and Brønsted-Lowry definitions are the most relevant; the Brønsted-Lowry definition is the most used definition. Hydronium ions are acids according to all three definitions. Although alcohols and amines can be Brønsted-Lowry acids, they can function as Lewis bases due to the lone pairs of electrons on their oxygen and nitrogen atoms; the Swedish chemist Svante Arrhenius attributed the properties of acidity to hydrogen ions or protons in 1884. An Arrhenius acid is a substance that, when added to water, increases the concentration of H+ ions in the water. Note that chemists write H+ and refer to the hydrogen ion when describing acid-base reactions but the free hydrogen nucleus, a proton, does not exist alone in water, it exists as the hydronium ion, H3O+.
Thus, an Arrhenius acid can be described as a substance that increases the concentration of hydronium ions when added to water. Examples include molecular substances such as acetic acid. An Arrhenius base, on the other hand, is a substance which increases the concentration of hydroxide ions when dissolved in water; this decreases the concentration of hydronium because the ions react to form H2O molecules: H3O+ + OH− ⇌ H2O + H2ODue to this equilibrium, any increase in the concentration of hydronium is accompanied by a decrease in the concentration of hydroxide. Thus, an Arrhenius acid could be said to be one that decreases hydroxide concentration, while an Arrhenius base increases it. In an acidic solution, the concentration of hydronium ions is greater than 10−7 moles per liter. Since pH is defined as the negative logarithm of the concentration of hydronium ions, acidic solutions thus have a pH of less than 7. While the Arrhenius concept is useful for describing many reactions, it is quite limited in its scope.
In 1923 chemists Johannes Nicolaus Brønsted and Thomas Martin Lowry independently recognized that acid-base reactions involve the transfer of a proton. A Brønsted-Lowry acid is a species. Brønsted-Lowry acid-base theory has several advantages over Arrhenius theory. Consider the following reactions of acetic acid, the organic acid that gives vinegar its characteristic taste: CH3COOH + H2O ⇌ CH3COO− + H3O+ CH3COOH + NH3 ⇌ CH3COO− + NH+4Both theories describe the first reaction: CH3COOH acts as an Arrhenius acid because it acts as a source of H3O+ when dissolved in water, it acts as a Brønsted acid by donating a proton to water. In the second example CH3COOH undergoes the same transformation, in this case donating a proton to ammonia, but does not relate to the Arrhenius definition of an acid because the reaction does not produce hydronium. CH3COOH is
Occupational safety and health
Occupational safety and health commonly referred to as occupational health and safety, occupational health, or workplace health and safety, is a multidisciplinary field concerned with the safety and welfare of people at work. These terms refer to the goals of this field, so their use in the sense of this article was an abbreviation of occupational safety and health program/department etc; the goals of occupational safety and health programs include to foster a safe and healthy work environment. OSH may protect co-workers, family members, employers and many others who might be affected by the workplace environment. In the United States, the term occupational health and safety is referred to as occupational health and occupational and non-occupational safety and includes safety for activities outside of work. In common-law jurisdictions, employers have a common law duty to take reasonable care of the safety of their employees. Statute law may in addition impose other general duties, introduce specific duties, create government bodies with powers to regulate workplace safety issues: details of this vary from jurisdiction to jurisdiction.
As defined by the World Health Organization "occupational health deals with all aspects of health and safety in the workplace and has a strong focus on primary prevention of hazards." Health has been defined as "a state of complete physical and social well-being and not the absence of disease or infirmity." Occupational health is a multidisciplinary field of healthcare concerned with enabling an individual to undertake their occupation, in the way that causes least harm to their health. Health has been defined as It contrasts, for example, with the promotion of health and safety at work, concerned with preventing harm from any incidental hazards, arising in the workplace. Since 1950, the International Labour Organization and the World Health Organization have shared a common definition of occupational health, it was adopted by the Joint ILO/WHO Committee on Occupational Health at its first session in 1950 and revised at its twelfth session in 1995. The definition reads: "The main focus in occupational health is on three different objectives: the maintenance and promotion of workers’ health and working capacity.
The concept of working culture is intended in this context to mean a reflection of the essential value systems adopted by the undertaking concerned. Such a culture is reflected in practice in the managerial systems, personnel policy, principles for participation, training policies and quality management of the undertaking." Those in the field of occupational health come from a wide range of disciplines and professions including medicine, epidemiology and rehabilitation, occupational therapy, occupational medicine, human factors and ergonomics, many others. Professionals advise on a broad range of occupational health matters; these include how to avoid particular pre-existing conditions causing a problem in the occupation, correct posture for the work, frequency of rest breaks, preventative action that can be undertaken, so forth. "Occupational health should aim at: the promotion and maintenance of the highest degree of physical and social well-being of workers in all occupations. The research and regulation of occupational safety and health are a recent phenomenon.
As labor movements arose in response to worker concerns in the wake of the industrial revolution, worker's health entered consideration as a labor-related issue. In the United Kingdom, the Factory Acts of the early nineteenth century arose out of concerns about the poor health of children working in cotton mills: the Act of 1833 created a dedicated professional Factory Inspectorate; the initial remit of the Inspectorate was to police restrictions on the working hours in the textile industry of children and young persons. However, on the urging of the Factory Inspectorate, a further Act in 1844 giving similar restrictions on working hours for women in the textile industry introduced a requirement for machinery guarding. In 1840 a Royal Commission published its findings on the state of conditions for the workers of the mining industry that documented the appallingly dangerous environment that they had to work in and the high frequency of accidents; the commission sparked public outrage which resulted in the Mines Act of 1842.
The act set up an inspectorate for mines and collieries which resulted in many prosecutions and safety improvements, by 1850, inspectors were able to enter and inspect premises at their discretion. Otto von Bismarck inaugurated the first social insurance legislation in 1883 and the first worker's compensation law in 1884 – the first of their kind in the Western world. Similar acts followed in other countries
In chemistry, an alcohol is any organic compound in which the hydroxyl functional group is bound to a carbon. The term alcohol referred to the primary alcohol ethanol, used as a drug and is the main alcohol present in alcoholic beverages. An important class of alcohols, of which methanol and ethanol are the simplest members, includes all compounds for which the general formula is CnH2n+1OH, it is these simple monoalcohols. The suffix -ol appears in the IUPAC chemical name of all substances where the hydroxyl group is the functional group with the highest priority; when a higher priority group is present in the compound, the prefix hydroxy- is used in its IUPAC name. The suffix -ol in non-IUPAC names typically indicates that the substance is an alcohol. However, many substances that contain hydroxyl functional groups have names which include neither the suffix -ol, nor the prefix hydroxy-. Alcohol distillation originated in India. During 2000 BCE, people of India used. Alcohol distillation was known to Islamic chemists as early as the eighth century.
The Arab chemist, al-Kindi, unambiguously described the distillation of wine in a treatise titled as "The Book of the chemistry of Perfume and Distillations". The Persian physician, alchemist and philosopher Rhazes is credited with the discovery of ethanol; the word "alcohol" is from a powder used as an eyeliner. Al- is the Arabic definite article, equivalent to the in English. Alcohol was used for the fine powder produced by the sublimation of the natural mineral stibnite to form antimony trisulfide Sb2S3, it was considered to be the essence or "spirit" of this mineral. It was used as an antiseptic and cosmetic; the meaning of alcohol was extended to distilled substances in general, narrowed to ethanol, when "spirits" was a synonym for hard liquor. Bartholomew Traheron, in his 1543 translation of John of Vigo, introduces the word as a term used by "barbarous" authors for "fine powder." Vigo wrote: "the barbarous auctours use alcohol, or alcofoll, for moost fine poudre."The 1657 Lexicon Chymicum, by William Johnson glosses the word as "antimonium sive stibium."
By extension, the word came to refer to any fluid obtained by distillation, including "alcohol of wine," the distilled essence of wine. Libavius in Alchymia refers to "vini alcohol vel vinum alcalisatum". Johnson glosses alcohol vini as "quando omnis superfluitas vini a vino separatur, ita ut accensum ardeat donec totum consumatur, nihilque fæcum aut phlegmatis in fundo remaneat." The word's meaning became restricted to "spirit of wine" in the 18th century and was extended to the class of substances so-called as "alcohols" in modern chemistry after 1850. The term ethanol was invented 1892, combining the word ethane with the "-ol" ending of "alcohol". IUPAC nomenclature is used in scientific publications and where precise identification of the substance is important in cases where the relative complexity of the molecule does not make such a systematic name unwieldy. In naming simple alcohols, the name of the alkane chain loses the terminal e and adds the suffix -ol, e.g. as in "ethanol" from the alkane chain name "ethane".
When necessary, the position of the hydroxyl group is indicated by a number between the alkane name and the -ol: propan-1-ol for CH3CH2CH2OH, propan-2-ol for CH3CHCH3. If a higher priority group is present the prefix hydroxy-is used, e.g. as in 1-hydroxy-2-propanone. In cases where the OH functional group is bonded to an sp2 carbon on an aromatic ring the molecule is known as a phenol, is named using the IUPAC rules for naming phenols. In other less formal contexts, an alcohol is called with the name of the corresponding alkyl group followed by the word "alcohol", e.g. methyl alcohol, ethyl alcohol. Propyl alcohol may be n-propyl alcohol or isopropyl alcohol, depending on whether the hydroxyl group is bonded to the end or middle carbon on the straight propane chain; as described under systematic naming, if another group on the molecule takes priority, the alcohol moiety is indicated using the "hydroxy-" prefix. Alcohols are classified into primary and tertiary, based upon the number of carbon atoms connected to the carbon atom that bears the hydroxyl functional group.
The primary alcohols have general formulas RCH2OH. The simplest primary alcohol is methanol, for which R=H, the next is ethanol, for which R=CH3, the methyl group. Secondary alcohols are those of the form RR'CHOH, the simplest of, 2-propanol. For the tertiary alcohols the general form is RR'R"COH; the simplest example is tert-butanol, for which each of R, R', R" is CH3. In these shorthands, R, R', R" represent substituents, alkyl or other attached organic groups. In archaic nomenclature, alcohols can be named as derivatives of methanol using "-carbinol" as the ending. For instance, 3COH can be named trimethylcarbinol. Alcohols have a long history of myriad uses. For simple mono-alcohols, the focus on this article, the following are most important industrial alcohols: methanol for the production of formaldehyde and as a fuel additive ethanol for alcoholic beverages, fuel additive, solvent 1-propanol, 1-butanol, isobutyl alcohol for use as a solvent a
Hydrogen sulfide is the chemical compound with the formula H2S. It is a colorless chalcogen hydride gas with the characteristic foul odor of rotten eggs, it is poisonous and flammable. Hydrogen sulfide is produced from the microbial breakdown of organic matter in the absence of oxygen gas, such as in swamps and sewers. H2S occurs in volcanic gases, natural gas, in some sources of well water; the human body uses it as a signaling molecule. Swedish chemist Carl Wilhelm Scheele is credited with having discovered hydrogen sulfide in 1777; the British English spelling of this compound is hydrogen sulphide, but this spelling is not recommended by the International Union of Pure and Applied Chemistry or the Royal Society of Chemistry. Hydrogen sulfide is denser than air. Hydrogen sulfide burns in oxygen with a blue flame to form sulfur water. In general, hydrogen sulfide acts as a reducing agent in the presence of base, which forms SH−. At high temperatures or in the presence of catalysts, sulfur dioxide reacts with hydrogen sulfide to form elemental sulfur and water.
This reaction is exploited in the Claus process, an important industrial method to dispose of hydrogen sulfide. Hydrogen sulfide is soluble in water and acts as a weak acid, giving the hydrosulfide ion HS−. Hydrogen sulfide and its solutions are colorless; when exposed to air, it oxidizes to form elemental sulfur, not soluble in water. The sulfide anion S2− is not formed in aqueous solution. Hydrogen sulfide reacts with metal ions to form metal sulfides, which are insoluble dark colored solids. Lead acetate paper is used to detect hydrogen sulfide because it converts to lead sulfide, black. Treating metal sulfides with strong acid liberates hydrogen sulfide. At pressures above 90 GPa, hydrogen sulfide becomes a metallic conductor of electricity; when cooled below a critical temperature this high-pressure phase exhibits superconductivity. The critical temperature increases with pressure. If hydrogen sulfide is pressurized at higher temperatures cooled, the critical temperature reaches 203 K, the highest accepted superconducting critical temperature as of 2015.
By substituting a small part of sulfur with phosphorus and using higher pressures, it has been predicted that it may be possible to raise the critical temperature to above 0 °C and achieve room-temperature superconductivity. Hydrogen sulfide is most obtained by its separation from sour gas, natural gas with high content of H2S, it can be produced by treating hydrogen with molten elemental sulfur at about 450 °C. Hydrocarbons can serve as a source of hydrogen in this process. Sulfate-reducing bacteria generate usable energy under low-oxygen conditions by using sulfates to oxidize organic compounds or hydrogen. A standard lab preparation is to treat ferrous sulfide with a strong acid in a Kipp generator: FeS + 2 HCl → FeCl2 + H2SFor use in qualitative inorganic analysis, thioacetamide is used to generate H2S: CH3CNH2 + H2O → CH3CNH2 + H2SMany metal and nonmetal sulfides, e.g. aluminium sulfide, phosphorus pentasulfide, silicon disulfide liberate hydrogen sulfide upon exposure to water: 6 H2O + Al2S3 → 3 H2S + 2 Al3This gas is produced by heating sulfur with solid organic compounds and by reducing sulfurated organic compounds with hydrogen.
Water heaters can aid the conversion of sulfate in water to hydrogen sulfide gas. This is due to providing a warm environment sustainable for sulfur bacteria and maintaining the reaction which interacts between sulfate in the water and the water heater anode, made from magnesium metal. Hydrogen sulfide can be generated in cells via non enzymatic pathway. H2S in the body acts as a gaseous signaling molecule, known to inhibit Complex IV of the mitochondrial electron transport chain which reduces ATP generation and biochemical activity within cells. Three enzymes are known to synthesize H2S: cystathionine γ-lyase, cystathionine β-synthetase and 3-mercaptopyruvate sulfurtransferase; these enzymes have been identified in a breadth of biological cells and tissues, their activity has been observed to be induced by a number of disease states. It is becoming clear that H2S is an important mediator of a wide range of cell functions in health and in disease. CBS and CSE are the main proponents of H2S biogenesis.
These enzymes are characterized by the transfer of a sulfur atom from methionine to serine to form a cysteine molecule. 3-MST contributes to hydrogen sulfide production by way of the cysteine catabolic pathway. Dietary amino acids, such as methionine and cysteine serve as the primary substrates for the transulfuration pathways and in the production of hydrogen sulfide. Hydrogen sulfide can be synthesized by non-enzymatic pathway, derived from proteins such as ferredoxins and Rieske proteins. H2S has been shown to be involved in physiological processes like vasoconstriction in animals, increasing seed germination and stress responses in plants. Hydrogen sulfide signaling is innately intertwined with physiological processes that are known to be moderated by reactive oxygen species and reactive nitrogen species. H2S has been shown to interact with NO resulting in severa
The density, or more the volumetric mass density, of a substance is its mass per unit volume. The symbol most used for density is ρ, although the Latin letter D can be used. Mathematically, density is defined as mass divided by volume: ρ = m V where ρ is the density, m is the mass, V is the volume. In some cases, density is loosely defined as its weight per unit volume, although this is scientifically inaccurate – this quantity is more called specific weight. For a pure substance the density has the same numerical value as its mass concentration. Different materials have different densities, density may be relevant to buoyancy and packaging. Osmium and iridium are the densest known elements at standard conditions for temperature and pressure but certain chemical compounds may be denser. To simplify comparisons of density across different systems of units, it is sometimes replaced by the dimensionless quantity "relative density" or "specific gravity", i.e. the ratio of the density of the material to that of a standard material water.
Thus a relative density less than one means. The density of a material varies with pressure; this variation is small for solids and liquids but much greater for gases. Increasing the pressure on an object decreases the volume of the object and thus increases its density. Increasing the temperature of a substance decreases its density by increasing its volume. In most materials, heating the bottom of a fluid results in convection of the heat from the bottom to the top, due to the decrease in the density of the heated fluid; this causes it to rise relative to more dense unheated material. The reciprocal of the density of a substance is called its specific volume, a term sometimes used in thermodynamics. Density is an intensive property in that increasing the amount of a substance does not increase its density. In a well-known but apocryphal tale, Archimedes was given the task of determining whether King Hiero's goldsmith was embezzling gold during the manufacture of a golden wreath dedicated to the gods and replacing it with another, cheaper alloy.
Archimedes knew that the irregularly shaped wreath could be crushed into a cube whose volume could be calculated and compared with the mass. Baffled, Archimedes is said to have taken an immersion bath and observed from the rise of the water upon entering that he could calculate the volume of the gold wreath through the displacement of the water. Upon this discovery, he leapt from his bath and ran naked through the streets shouting, "Eureka! Eureka!". As a result, the term "eureka" entered common parlance and is used today to indicate a moment of enlightenment; the story first appeared in written form in Vitruvius' books of architecture, two centuries after it took place. Some scholars have doubted the accuracy of this tale, saying among other things that the method would have required precise measurements that would have been difficult to make at the time. From the equation for density, mass density has units of mass divided by volume; as there are many units of mass and volume covering many different magnitudes there are a large number of units for mass density in use.
The SI unit of kilogram per cubic metre and the cgs unit of gram per cubic centimetre are the most used units for density. One g/cm3 is equal to one thousand kg/m3. One cubic centimetre is equal to one millilitre. In industry, other larger or smaller units of mass and or volume are more practical and US customary units may be used. See below for a list of some of the most common units of density. A number of techniques as well as standards exist for the measurement of density of materials; such techniques include the use of a hydrometer, Hydrostatic balance, immersed body method, air comparison pycnometer, oscillating densitometer, as well as pour and tap. However, each individual method or technique measures different types of density, therefore it is necessary to have an understanding of the type of density being measured as well as the type of material in question; the density at all points of a homogeneous object equals its total mass divided by its total volume. The mass is measured with a scale or balance.
To determine the density of a liquid or a gas, a hydrometer, a dasymeter or a Coriolis flow meter may be used, respectively. Hydrostatic weighing uses the displacement of water due to a submerged object to determine the density of the object. If the body is not homogeneous its density varies between different regions of the object. In that case the density around any given location is determined by calculating the density of a small volume around that location. In the limit of an infinitesimal volume the density of an inhomogeneous object at a point becomes: ρ = d m / d V, where d V is an elementary volume at position r; the mass of the body t
The Jmol applet, among other abilities, offers an alternative to the Chime plug-in, no longer under active development. While Jmol has many features that Chime lacks, it does not claim to reproduce all Chime functions, most notably, the Sculpt mode. Chime requires plug-in installation and Internet Explorer 6.0 or Firefox 2.0 on Microsoft Windows, or Netscape Communicator 4.8 on Mac OS 9. Jmol operates on a wide variety of platforms. For example, Jmol is functional in Mozilla Firefox, Internet Explorer, Google Chrome, Safari. Chemistry Development Kit Comparison of software for molecular mechanics modeling Jmol extension for MediaWiki List of molecular graphics systems Molecular graphics Molecule editor Proteopedia PyMOL SAMSON Official website Wiki with listings of websites and moodles Willighagen, Egon. "Fast and Scriptable Molecular Graphics in Web Browsers without Java3D". Doi:10.1038/npre.2007.50.1