Volgograd Tsaritsyn, 1589–1925, Stalingrad, 1925–1961, is an industrial city and the administrative centre of Volgograd Oblast, Russia. The city lies on the western bank of the Volga River; the Battle of Stalingrad in World War II was one of the largest and bloodiest battles in the history of warfare. Known locally as the "Hero City", it is home to The Motherland Calls, an 85 meter statue dedicated to the heroes of the battle; the city has many tourist attractions, such as museums, sandy beaches, a self-propelled floating church. Its population was 1,021,215 at the 2010 Census, growing from 1,011,417 in the 2002 Census. Although the city may have originated in 1555, documented evidence of Tsaritsyn at the confluence of the Tsaritsa and Volga rivers dates only from 1589. Grigori Zasekin established the fortress Sary Su as part of the defences of the unstable southern border of the Tsardom of Russia; the structure stood above the mouth of the Tsaritsa River on the right bank. It soon became the nucleus of a trading settlement.
In 1607 the fortress garrison rebelled against the troops of Tsar Vasili Shuisky for six months. In 1608 the city acquired St. John the Baptist. At the beginning of the 17th century, the garrison consisted of 350 to 400 people. In 1670 troops of Stepan Razin captured the fortress. In 1708 the insurgent Cossack Kondraty Bulavin held the fortress. In 1717 in the Kuban pogrom, raiders from the Kuban under the command of the Crimean Tatar Bakhti Gerai blockaded the town and enslaved thousands in the area. In August 1774 Yemelyan Pugachev unsuccessfully attempted to storm the city. In 1691 Moscow established a customs-post at Tsaritsyn. In 1708 Tsaritsyn was assigned to the Kazan Governorate. According to the census in 1720, the city had a population of 408 people. In 1773 the city became a district town. From 1779 it belonged to the Saratov Viceroyalty. In 1780 the city came under the newly-established Saratov Governorate. In the 19th century Tsaritsyn became commercial center; the population expanded increasing from fewer than 3,000 people in 1807 to about 84,000 in 1900.
The first railway reached the town in 1862. The first theatre opened in 1872, the first cinema in 1907. In 1913 Tsaritsyn got its first tram-line, the city's first electric lights were installed in the city center. During the Russian Civil War of 1917–1923, Tsaritsyn came under Soviet control from November 1917. In 1918 White troops under the Ataman of the Don Cossack Host, Pyotr Krasnov, besieged Tsaritsyn; the Reds repulsed three assaults by the Whites. However, in June 1919 the White Armed Forces of South Russia under the command of General Denikin captured Tsaritsyn, which they held until January 1920; the fighting from July 1918 to January 1920 became known as the Battle for Tsaritsyn. The city was renamed Stalingrad after Joseph Stalin on April 10, 1925; this was to recognize the city and Stalin's role in its defense against the Whites between 1918 and 1920. In 1931, the German settlement-colony Old Sarepta became a district of Stalingrad. Renamed Krasnoarmeysky Rayon, it became the largest area of the city.
The first institute was opened in 1930. A year the Stalingrad Industrial Pedagogical Institute, now Volgograd State Pedagogical University, was opened. Under Stalin, the city became a center of heavy industry and transshipment by river. During World War II, German and Axis forces attacked the city, in 1942 it became the site of one of the pivotal battles of the war; the Battle of Stalingrad had the greatest casualty figures of any single battle in the history of warfare. The battle became a titanic struggle between Hitler and Stalin as both saw it of great propaganda value, each keenly aware of the namesake of the city, each poured hundreds of thousands of men into the battle; the battle began on August 23, 1942, on the same day, the city suffered heavy aerial bombardment that reduced most of it to rubble. By September, the fighting reached the city center; the fighting was of unprecedented intensity. By early November, the German forces controlled 90 percent of the city and had cornered the Soviets in two narrow pockets, but they were unable to eliminate the last pockets of Soviet resistance before Soviet forces launched a huge counterattack on November 19.
This led to the encirclement of the German Sixth Army and other Axis units. On January 31, 1943 the Sixth Army's commander, Field Marshal Friedrich Paulus, by February 2, with the elimination of straggling German troops, the Battle of Stalingrad was over. In 1945 the Soviet Union awarded Stalingrad the title Hero City for its resistance. Great Britain's King George VI awarded the citizens of Stalingrad the jeweled "Sword of Stalingrad" in recognition of their bravery. A number of cities around the world established sister and twinning links in the spirit of solidarity or reconciliation. One of the first "sister city" projects was that established during World War II between Stalingrad and Coventry in the United Kingdom – both suffered extensive devastation from aerial bombardment. On 10 November 1961, Nikita Khrushchev's administration changed the name of the city to Volg
The Soviet Union the Union of Soviet Socialist Republics, was a socialist state in Eurasia that existed from 1922 to 1991. Nominally a union of multiple national Soviet republics, its government and economy were centralized; the country was a one-party state, governed by the Communist Party with Moscow as its capital in its largest republic, the Russian Soviet Federative Socialist Republic. Other major urban centres were Leningrad, Minsk, Alma-Ata, Novosibirsk, it spanned over 10,000 kilometres east to west across 11 time zones, over 7,200 kilometres north to south. It had five climate zones: tundra, steppes and mountains; the Soviet Union had its roots in the 1917 October Revolution, when the Bolsheviks, led by Vladimir Lenin, overthrew the Russian Provisional Government which had replaced Tsar Nicholas II during World War I. In 1922, the Soviet Union was formed by a treaty which legalized the unification of the Russian, Transcaucasian and Byelorussian republics that had occurred from 1918. Following Lenin's death in 1924 and a brief power struggle, Joseph Stalin came to power in the mid-1920s.
Stalin committed the state's ideology to Marxism–Leninism and constructed a command economy which led to a period of rapid industrialization and collectivization. During his rule, political paranoia fermented and the Great Purge removed Stalin's opponents within and outside of the party via arbitrary arrests and persecutions of many people, resulting in at least 600,000 deaths. In 1933, a major famine struck the country. Before the start of World War II in 1939, the Soviets signed the Molotov–Ribbentrop Pact, agreeing to non-aggression with Nazi Germany, after which the USSR invaded Poland on 17 September 1939. In June 1941, Germany broke the pact and invaded the Soviet Union, opening the largest and bloodiest theatre of war in history. Soviet war casualties accounted for the highest proportion of the conflict in the effort of acquiring the upper hand over Axis forces at intense battles such as Stalingrad and Kursk; the territories overtaken by the Red Army became satellite states of the Soviet Union.
The post-war division of Europe into capitalist and communist halves would lead to increased tensions with the United States-led Western Bloc, known as the Cold War. Stalin died in 1953 and was succeeded by Nikita Khrushchev, who in 1956 denounced Stalin and began the de-Stalinization; the Cuban Missile Crisis occurred during Khrushchev's rule, among the many factors that led to his downfall in 1964. In the early 1970s, there was a brief détente of relations with the United States, but tensions resumed with the Soviet–Afghan War in 1979. In 1985, the last Soviet premier, Mikhail Gorbachev, sought to reform and liberalize the economy through his policies of glasnost and perestroika, which caused political instability. In 1989, Soviet satellite states in Eastern Europe overthrew their respective communist governments; as part of an attempt to prevent the country's dissolution due to rising nationalist and separatist movements, a referendum was held in March 1991, boycotted by some republics, that resulted in a majority of participating citizens voting in favor of preserving the union as a renewed federation.
Gorbachev's power was diminished after Russian President Boris Yeltsin's high-profile role in facing down a coup d'état attempted by Communist Party hardliners. In late 1991, Gorbachev resigned and the Supreme Soviet of the Soviet Union met and formally dissolved the Soviet Union; the remaining 12 constituent republics emerged as independent post-Soviet states, with the Russian Federation—formerly the Russian SFSR—assuming the Soviet Union's rights and obligations and being recognized as the successor state. The Soviet Union was a powerhouse of many significant technological achievements and innovations of the 20th century, including the world's first human-made satellite, the first humans in space and the first probe to land on another planet, Venus; the country had the largest standing military in the world. The Soviet Union was recognized as one of the five nuclear weapons states and possessed the largest stockpile of weapons of mass destruction, it was a founding permanent member of the United Nations Security Council as well as a member of the Organization for Security and Co-operation in Europe, the World Federation of Trade Unions and the leading member of the Council for Mutual Economic Assistance and the Warsaw Pact.
The word "Soviet" is derived from a Russian word сове́т meaning council, advice, harmony and all deriving from the proto-Slavic verbal stem of vět-iti, related to Slavic věst, English "wise", the root in "ad-vis-or", or the Dutch weten. The word sovietnik means "councillor". A number of organizations in Russian history were called "council". For example, in the Russian Empire the State Council, which functioned from 1810 to 1917, was referred to as a Council of Ministers after the revolt of 1905. During the Georgian Affair, Vladimir Lenin envisioned an expression of Great Russian ethnic chauvinism by Joseph Stalin and his supporters, calling for these nation-states to join Russia as semi-independent parts of a greater union, which he named as the Union of Soviet Republics of Europe and Asia. Stalin resisted the proposal, but accepted it, although with Lenin's agreement changed the name of the newly proposed sta
In broadcasting and radio communications, a call sign is a unique designation for a transmitter station. In the United States of America, they are used for all FCC-licensed transmitters. A call sign can be formally assigned by a government agency, informally adopted by individuals or organizations, or cryptographically encoded to disguise a station's identity; the use of call signs as unique identifiers dates to the landline railroad telegraph system. Because there was only one telegraph line linking all railroad stations, there needed to be a way to address each one when sending a telegram. In order to save time, two-letter identifiers were adopted for this purpose; this pattern continued in radiotelegraph operation. These were not globally unique, so a one-letter company identifier was added. By 1912, the need to identify stations operated by multiple companies in multiple nations required an international standard. Merchant and naval vessels are assigned call signs by their national licensing authorities.
In the case of states such as Liberia or Panama, which are flags of convenience for ship registration, call signs for larger vessels consist of the national prefix plus three letters. United States merchant vessels are given call signs beginning with the letters "W" or "K" while US naval ships are assigned call signs beginning with "N". Both ships and broadcast stations were assigned call signs in this series consisting of three or four letters. Ships equipped with Morse code radiotelegraphy, or life boat radio sets, Aviation ground stations, broadcast stations were given four letter call signs. Maritime coast stations on high frequency were assigned three letter call signs; as demand for both marine radio and broadcast call signs grew American-flagged vessels with radiotelephony only were given longer call signs with mixed letters and numbers. Leisure craft with VHF radios may not be assigned call signs, in which case the name of the vessel is used instead. Ships in the US still wishing to have a radio license are under FCC class SA: "Ship recreational or voluntarily equipped."
Those calls follow the land mobile format of the initial letter K or W followed by 1 or 2 letters followed by 3 or 4 numbers. U. S. Coast Guard small boats have a number, shown on both bows in which the first two digits indicate the nominal length of the boat in feet. For example, Coast Guard 47021 refers to the 21st in the series of 47-foot motor lifeboats; the call sign might be abbreviated to the final two or three numbers during operations, for example: Coast Guard zero two one. Aviation mobile stations equipped with radiotelegraphy were assigned five letter call signs.. Land Stations in Aviation were assigned four letter call signs; these call signs were phased out in the 1960s when flight radio officers were no longer required on international flights. USSR kept FRO's for the Moscow-Havana run until around 2000. All signs in aviation are derived from several different policies, depending upon the type of flight operation and whether or not the caller is in an aircraft or at a ground facility.
In most countries, unscheduled general aviation flights identify themselves using the call sign corresponding to the aircraft's registration number. In this case, the call sign is spoken using the International Civil Aviation Organization phonetic alphabet. Aircraft registration numbers internationally follow the pattern of a country prefix, followed by a unique identifier made up of letters and numbers. For example, an aircraft registered as N978CP conducting a general aviation flight would use the call sign November-niner-seven-eight-Charlie-Papa. However, in the United States a pilot of an aircraft would omit saying November, instead use the name of the aircraft manufacturer or the specific model. At times, general aviation pilots might omit additional preceding numbers and use only the last three numbers and letters; this is true at uncontrolled fields when reporting traffic pattern positions or at towered airports after establishing two-way communication with the tower controller. For example, Skyhawk eight-Charlie-Papa, left base.
In most countries, the aircraft call sign or "tail number"/"tail letters" are linked to the international radio call sign allocation table and follow a convention that aircraft radio stations receive call signs consisting of five letters. For example, all British civil aircraft have a five-letter call sign beginning with the letter G. Canadian aircraft have a call sign beginning with C–F or C–G, such as C–FABC. Wing In Ground-effect vehicles in Canada are eligible to receive C–Hxxx call signs, ultralight aircraft receive C-Ixxx call signs. In days gone by American aircraft used five letter call signs, such as KH–ABC, but they were replaced prior to World War II by the current American system of civilian aircraft call signs. Radio call signs used for communication in manned spaceflight is not formalized or regulated to the same degree as for aircraft; the three nations curren
In horology, a movement known as a caliber, is the mechanism of a watch or timepiece, as opposed to the case, which encloses and protects the movement, the face, which displays the time. The term originated with mechanical timepieces, whose clockwork movements are made of many moving parts, it is less applied to modern electronic or quartz timepieces, where the word module is used instead. In modern mass-produced clocks and watches, the same movement is inserted into many different styles of case; when buying a quality pocketwatch from the mid-19th to the mid-20th century, for example, the customer would select movement and case individually. Mechanical movements get dirty and the lubricants dry up, so they must periodically be disassembled and lubricated. One source recommends servicing intervals of: 3–5 years for watches, 15–20 years for grandfather clocks, 10–15 years for wall or mantel clocks, 15–20 years for anniversary clocks, 7 years for cuckoo clocks, with the longer intervals applying to antique timepieces.
A mechanical movement contains all the moving parts of a watch or clock except the hands, in the case of pendulum clocks, the pendulum and driving weights. The movement is made of the following components: Power source Either a mainspring, or a weight suspended from a cord wrapped around a pulley; the mainspring or pulley has a mechanism to allow it to be wound up, which includes a ratchet to prevent it from unwinding. The barrel or pulley has gear teeth on it. Wheel train A gear train. Large gears known as wheels mesh with small gears known as pinions; the wheels in a typical going train are the centre wheel, third wheel, fourth wheel. A separate set of wheels, the motion work, divides the motion of the minute hand by 12 to move the hour hand and in watches another set, the keyless work, allows the hands to be set. Escapement A mechanism that allows the wheel train to advance, or escape a fixed amount with each swing of the balance wheel or pendulum, it consists of a gear called an escape wheel, released one tooth at a time by a lever that rocks back and forth.
Each time the escape wheel moves forward it gives the pendulum or balance wheel a push to keep it moving. Oscillator The timekeeping element, either a pendulum or a balance wheel, it swings back and forth, with a constant time interval between each swing, called the beat. A pendulum movement has a pendulum hangar attached to a sturdy support on the back, from which the pendulum is suspended and a fork which gives the pendulum impulses; the oscillator always has some means for adjusting the rate of the clock. Pendulums have an adjustment nut under the bob, while balance wheels have a regulator lever on the balance spring. Watch movements come in various shapes to fit different case styles, such as round, rectangular, rectangular with cut corners and baguette, are measured in lignes, or in millimetres; each specific watch movement is called a caliber. The movement parts are separated into two main categories: those belonging to the ébauches and those belonging to the assortments. In watch movements the wheels and other moving parts are mounted between two plates, which are held a small distance apart with pillars to make a rigid framework for the movement.
One of these plates, the front plate just behind the face, is always circular, or the same shape and dimensions as the movement. The back plate has various shapes: Full plate movement In this design, used in the earliest pocketwatches until the 18th century, the back plate was circular. All the parts of the watch were mounted between the two plates except the balance wheel, mounted on the outside of the back plate, held by a bracket called the balance cock. Three-quarter plate movement In the 18th century, to make movements thinner, part of the back plate was cut away to make room for the balance and balance cock. Bridge movement In modern watch movements, the back plate is replaced with a series of plates or bars, called bridges; this makes servicing the movement easier, since individual bridges and the wheels they support can be removed and installed without disturbing the rest of the movement. The first bridge movements, in Swiss pocketwatches from around 1900, had three parallel bar bridges to support the three wheels of the going train.
This style is called Geneva movement. Mechanical watch movements are classified as manual or automatic: Manual or hand winding In this type the wearer must turn the crown periodically daily, in order to wind the mainspring, storing energy to run the watch until the next winding. Automatic or self-winding In this type, used in most mechanical watches sold today, the mainspring is automatically wound by the natural motions of the wearer's wrist while it is being worn, eliminating the need for manual winding. Additionally, a distinction is sometimes made on whether or not the movement offers hacking, allowing the second hand to be stopped. In horology, "caliber" refers to the specific internal mechanism of a watch or clock known as a movement. Although the term was only used to refer to the size of a movement, it is now used to designate a specific model. Different watch manufacturers tend to use their own identification system to number their calibers. Clockwork Chinese standard movement Spring Drive Federation of the Swiss Watch Industry: Glossary Easy Guide to Watch Movements Caliber Guide
Russia the Russian Federation, is a transcontinental country in Eastern Europe and North Asia. At 17,125,200 square kilometres, Russia is by far or by a considerable margin the largest country in the world by area, covering more than one-eighth of the Earth's inhabited land area, the ninth most populous, with about 146.77 million people as of 2019, including Crimea. About 77 % of the population live in the European part of the country. Russia's capital, Moscow, is one of the largest cities in the world and the second largest city in Europe. Extending across the entirety of Northern Asia and much of Eastern Europe, Russia spans eleven time zones and incorporates a wide range of environments and landforms. From northwest to southeast, Russia shares land borders with Norway, Estonia, Latvia and Poland, Ukraine, Azerbaijan, China and North Korea, it shares maritime borders with Japan by the Sea of Okhotsk and the U. S. state of Alaska across the Bering Strait. However, Russia recognises two more countries that border it, Abkhazia and South Ossetia, both of which are internationally recognized as parts of Georgia.
The East Slavs emerged as a recognizable group in Europe between the 3rd and 8th centuries AD. Founded and ruled by a Varangian warrior elite and their descendants, the medieval state of Rus arose in the 9th century. In 988 it adopted Orthodox Christianity from the Byzantine Empire, beginning the synthesis of Byzantine and Slavic cultures that defined Russian culture for the next millennium. Rus' disintegrated into a number of smaller states; the Grand Duchy of Moscow reunified the surrounding Russian principalities and achieved independence from the Golden Horde. By the 18th century, the nation had expanded through conquest and exploration to become the Russian Empire, the third largest empire in history, stretching from Poland on the west to Alaska on the east. Following the Russian Revolution, the Russian Soviet Federative Socialist Republic became the largest and leading constituent of the Union of Soviet Socialist Republics, the world's first constitutionally socialist state; the Soviet Union played a decisive role in the Allied victory in World War II, emerged as a recognized superpower and rival to the United States during the Cold War.
The Soviet era saw some of the most significant technological achievements of the 20th century, including the world's first human-made satellite and the launching of the first humans in space. By the end of 1990, the Soviet Union had the world's second largest economy, largest standing military in the world and the largest stockpile of weapons of mass destruction. Following the dissolution of the Soviet Union in 1991, twelve independent republics emerged from the USSR: Russia, Belarus, Uzbekistan, Azerbaijan, Kyrgyzstan, Tajikistan and the Baltic states regained independence: Estonia, Lithuania, it is governed as a federal semi-presidential republic. Russia's economy ranks as the twelfth largest by nominal GDP and sixth largest by purchasing power parity in 2018. Russia's extensive mineral and energy resources are the largest such reserves in the world, making it one of the leading producers of oil and natural gas globally; the country is one of the five recognized nuclear weapons states and possesses the largest stockpile of weapons of mass destruction.
Russia is a great power as well as a regional power and has been characterised as a potential superpower. It is a permanent member of the United Nations Security Council and an active global partner of ASEAN, as well as a member of the Shanghai Cooperation Organisation, the G20, the Council of Europe, the Asia-Pacific Economic Cooperation, the Organization for Security and Co-operation in Europe, the World Trade Organization, as well as being the leading member of the Commonwealth of Independent States, the Collective Security Treaty Organization and one of the five members of the Eurasian Economic Union, along with Armenia, Belarus and Kyrgyzstan; the name Russia is derived from Rus', a medieval state populated by the East Slavs. However, this proper name became more prominent in the history, the country was called by its inhabitants "Русская Земля", which can be translated as "Russian Land" or "Land of Rus'". In order to distinguish this state from other states derived from it, it is denoted as Kievan Rus' by modern historiography.
The name Rus itself comes from the early medieval Rus' people, Swedish merchants and warriors who relocated from across the Baltic Sea and founded a state centered on Novgorod that became Kievan Rus. An old Latin version of the name Rus' was Ruthenia applied to the western and southern regions of Rus' that were adjacent to Catholic Europe; the current name of the country, Россия, comes from the Byzantine Greek designation of the Rus', Ρωσσία Rossía—spelled Ρωσία in Modern Greek. The standard way to refer to citizens of Russia is rossiyane in Russian. There are two Russian words which are commonly
Manufacturing is the production of products for use or sale using labour and machines, tools and biological processing, or formulation. The term may refer to a range of human activity, from handicraft to high tech, but is most applied to industrial design, in which raw materials are transformed into finished goods on a large scale; such finished goods may be sold to other manufacturers for the production of other, more complex products, such as aircraft, household appliances, sports equipment or automobiles, or sold to wholesalers, who in turn sell them to retailers, who sell them to end users and consumers. Manufacturing engineering or manufacturing process are the steps through which raw materials are transformed into a final product; the manufacturing process begins with the product design, materials specification from which the product is made. These materials are modified through manufacturing processes to become the required part. Modern manufacturing includes all intermediate processes required in the production and integration of a product's components.
Some industries, such as semiconductor and steel manufacturers use the term fabrication instead. The manufacturing sector is connected with engineering and industrial design. Examples of major manufacturers in North America include General Motors Corporation, General Electric, Procter & Gamble, General Dynamics, Boeing and Precision Castparts. Examples in Europe include Volkswagen Siemens, FCA and Michelin. Examples in Asia include Toyota, Panasonic, LG, Samsung and Tata Motors. In its earliest form, manufacturing was carried out by a single skilled artisan with assistants. Training was by apprenticeship. In much of the pre-industrial world, the guild system protected the privileges and trade secrets of urban artisans. Before the Industrial Revolution, most manufacturing occurred in rural areas, where household-based manufacturing served as a supplemental subsistence strategy to agriculture. Entrepreneurs organized a number of manufacturing households into a single enterprise through the putting-out system.
Toll manufacturing is an arrangement whereby a first firm with specialized equipment processes raw materials or semi-finished goods for a second firm. Manufacturing Engineering Agile manufacturing American system of manufacturing British factory system of manufacturing Craft or guild system Fabrication Flexible manufacturing Just-in-time manufacturing Lean manufacturing Mass customization – 3D printing, design-your-own web sites for sneakers, fast fashion Mass production Ownership Packaging and labeling Prefabrication Putting-out system Rapid manufacturing Reconfigurable manufacturing system Soviet collectivism in manufacturing History of numerical control Emerging technologies have provided some new growth in advanced manufacturing employment opportunities in the Manufacturing Belt in the United States. Manufacturing provides important material support for national infrastructure and for national defense. On the other hand, most manufacturing may involve significant environmental costs; the clean-up costs of hazardous waste, for example, may outweigh the benefits of a product that creates it.
Hazardous materials may expose workers to health risks. These costs are now well known and there is effort to address them by improving efficiency, reducing waste, using industrial symbiosis, eliminating harmful chemicals; the negative costs of manufacturing can be addressed legally. Developed countries regulate manufacturing activity with environmental laws. Across the globe, manufacturers can be subject to regulations and pollution taxes to offset the environmental costs of manufacturing activities. Labor unions and craft guilds have played a historic role in the negotiation of worker rights and wages. Environment laws and labor protections that are available in developed nations may not be available in the third world. Tort law and product liability impose additional costs on manufacturing; these are significant dynamics in the ongoing process, occurring over the last few decades, of manufacture-based industries relocating operations to "developing-world" economies where the costs of production are lower than in "developed-world" economies.
Manufacturing has unique health and safety challenges and has been recognized by the National Institute for Occupational Safety and Health as a priority industry sector in the National Occupational Research Agenda to identify and provide intervention strategies regarding occupational health and safety issues. Surveys and analyses of trends and issues in manufacturing and investment around the world focus on such things as: The nature and sources of the considerable variations that occur cross-nationally in levels of manufacturing and wider industrial-economic growth. In addition to general overviews, researchers have examined the features and factors affecting particular key aspects of manufacturing development, they have compared production and investment in a range of Western and non-Western countries and presented case studies of growth and performance in important individual industries and market-economic sectors. On June 26, 2009, Jeff Immelt, the CEO of General Electric, called for the United States to increase its manufacturing base employment to 20% of the workforce, commenting that the U.
S. has outsourced too much in some areas and can no longer rely on the financial sector and consumer spending to drive demand. Further, while U. S. manufacturing performs well compared to the rest of the U. S. economy, research shows that it performs poorly compared to manufacturing in other high-wage countries. A total of 3.2 million – one in six U. S. manuf