|Part of a series on|
Earthquake forecasting is a branch of the science of seismology concerned with the probabilistic assessment of general earthquake hazard, including the frequency and magnitude of damaging earthquakes in a given area over years or decades. While forecasting is usually considered to be a type of prediction, earthquake forecasting is often differentiated from earthquake prediction, whose goal is the specification of the time, location, and magnitude of future earthquakes with sufficient precision that a warning can be issued. Both forecasting and prediction of earthquakes are distinguished from earthquake warning systems, which upon detection of an earthquake, provide a real-time warning to regions that might be affected.
In the 1970s, scientists were optimistic that a practical method for predicting earthquakes would soon be found, but by the 1990s continuing failure led many to question whether it was even possible. Demonstrably successful predictions of large earthquakes have not occurred and the few claims of success are controversial. Consequently, many scientific and government resources have been used for probabilistic seismic hazard estimates rather than prediction of individual earthquakes. Such estimates are used to establish building codes, insurance rate structures, awareness and preparedness programs, and public policy related to seismic events. In addition to regional earthquake forecasts, such seismic hazard calculations can take factors such as local geological conditions into account. Anticipated ground motion can then be used to guide building design criteria.
Methods for earthquake forecasting
Methods for earthquake forecasting generally look for trends or patterns that lead to an earthquake. As these trends may be complex and involve many variables, advanced statistical techniques are often needed to understand them, therefore these are sometimes called statistical methods. These approaches tend to have relatively long time periods, making them useful for earthquake forecasting.
Even the stiffest of rock is not perfectly rigid. Given a large force (such as between two immense tectonic plates moving past each other) the earth's crust will bend or deform. According to the elastic rebound theory of Reid (1910), eventually the deformation (strain) becomes great enough that something breaks, usually at an existing fault. Slippage along the break (an earthquake) allows the rock on each side to rebound to a less deformed state. In the process energy is released in various forms, including seismic waves. The cycle of tectonic force being accumulated in elastic deformation and released in a sudden rebound is then repeated. As the displacement from a single earthquake ranges from less than a meter to around 10 meters (for an M 8 quake), the demonstrated existence of large strike-slip displacements of hundreds of miles shows the existence of a long running earthquake cycle.
The most studied earthquake faults (such as the Nankai megathrust, the Wasatch fault, and the San Andreas fault) appear to have distinct segments. The characteristic earthquake model postulates that earthquakes are generally constrained within these segments. As the lengths and other properties of the segments are fixed, earthquakes that rupture the entire fault should have similar characteristics. These include the maximum magnitude (which is limited by the length of the rupture), and the amount of accumulated strain needed to rupture the fault segment. Since continuous plate motions cause the strain to accumulate steadily, seismic activity on a given segment should be dominated by earthquakes of similar characteristics that recur at somewhat regular intervals. For a given fault segment, identifying these characteristic earthquakes and timing their recurrence rate (or conversely return period) should therefore inform us about the next rupture; this is the approach generally used in forecasting seismic hazard. Return periods are also used for forecasting other rare events, such as cyclones and floods, and assume that future frequency will be similar to observed frequency to date.
Extrapolation from the Parkfield earthquakes of 1857, 1881, 1901, 1922, 1934, and 1966 led to a forecast of an earthquake around 1988, or before 1993 at the latest (at the 95% confidence interval), based on the characteristic earthquake model. Instrumentation was put in place in hopes of detecting precursors of the anticipated earthquake. However, forecasted earthquake did not occur until 2004. The failure of the Parkfield prediction experiment has raised doubt as to the validity of the characteristic earthquake model itself.
At the contact where two tectonic plates slip past each other every section must eventually slip, as (in the long-term) none get left behind. But they do not all slip at the same time; different sections will be at different stages in the cycle of strain (deformation) accumulation and sudden rebound. In the seismic gap model the "next big quake" should be expected not in the segments where recent seismicity has relieved the strain, but in the intervening gaps where the unrelieved strain is the greatest. This model has an intuitive appeal; it is used in long-term forecasting, and was the basis of a series of circum-Pacific (Pacific Rim) forecasts in 1979 and 1989–1991.
However, some underlying assumptions about seismic gaps are now known to be incorrect. A close examination suggests that "there may be no information in seismic gaps about the time of occurrence or the magnitude of the next large event in the region"; statistical tests of the circum-Pacific forecasts shows that the seismic gap model "did not forecast large earthquakes well". Another study concluded that a long quiet period did not increase earthquake potential.
The 2015 Uniform California Earthquake Rupture Forecast, Version 3, or UCERF3, is the latest official earthquake rupture forecast (ERF) for the state of California, superseding UCERF2. It provides authoritative estimates of the likelihood and severity of potentially damaging earthquake ruptures in the long- and near-term. Combining this with ground motion models produces estimates of the severity of ground shaking that can be expected during a given period (seismic hazard), and of the threat to the built environment (seismic risk). This information is used to inform engineering design and building codes, planning for disaster, and evaluating whether earthquake insurance premiums are sufficient for the prospective losses. A variety of hazard metrics  can be calculated with UCERF3; a typical metric is the likelihood of a magnitude M 6.7 earthquake (the size of the 1994 Northridge earthquake) in the 30 years (typical life of a mortgage) since 2014.
UCERF3 was prepared by the Working Group on California Earthquake Probabilities (WGCEP), a collaboration between the United States Geological Survey (USGS), the California Geological Survey (CGS), and the Southern California Earthquake Center (SCEC), with significant funding from the California Earthquake Authority (CEA).
- Kanamori 2003, p. 1205. See also ICEF 2011, p. 327.
- Geller et al. 1997, p. 1616, following Allen (1976, p. 2070), who in turn followed Wood & Gutenberg (1935). Kagan (1997b, §2.1) says: "This definition has several defects which contribute to confusion and difficulty in prediction research." In addition to specification of time, location, and magnitude, Allen suggested three other requirements: 4) indication of the author's confidence in the prediction, 5) the chance of an earthquake occurring anyway as a random event, and 6) publication in a form that gives failures the same visibility as successes. Kagan & Knopoff (1987, p. 1563)[citation not found] define prediction (in part) "to be a formal rule where by the available space-time-seismic moment manifold of earthquake occurrence is significantly contracted ...."
- Kagan 1997b, p. 507.
- Geller et al. 1997, p. 1617; Geller 1997, §2.3, p. 427; Console 2001, p. 261.
- E.g., the most famous claim of a successful prediction is that alleged for the 1975 Haicheng earthquake (ICEF 2011, p. 328), and is now listed as such in textbooks (Jackson 2004, p. 344).[citation not found] A later study concluded there was no valid short-term prediction (Wang et al. 2006).[citation not found] See Earthquake prediction.
- "National Seismic Hazard Maps". United States Geological Survey. 25 August 2016. Archived from the original on 10 August 2016. Retrieved 1 September 2016.
- Reid 1910, p. 22; ICEF 2011, p. 329.
- Wells & Coppersmith 1994, Fig. 11, p. 993.
- Zoback 2006 provides a clear explanation. Evans 1997, §2.2 also provides a description of the "self-organized criticality" (SOC) paradigm that is displacing the elastic rebound model.
- Castellaro 2003
- These include the type of rock and fault geometry.
- Schwartz & Coppersmith 1984; Tiampo & Shcherbakov 2012, p. 93, §2.2.
- Bakun & Lindh 1985, p. 621.
- Jackson & Kagan 2006.
- Scholz 2002, p. 284, §5.3.3; Kagan & Jackson 1991, pp. 21,419; Jackson & Kagan 2006, p. S404.
- Kagan & Jackson 1991, pp. 21,419; McCann et al. 1979; Rong, Jackson & Kagan 2003.
- Lomnitz & Nava 1983.
- Rong, Jackson & Kagan 2003, p. 23.
- Kagan & Jackson 1991, Summary.
- Field et al. 2013, p. 2.
- For a list of evaluation metrics available as of 2013 see Table 11 in Field et al. 2013, p. 52.
- Following standard seismological practice, all earthquake magnitudes here are per the moment magnitude scale. This is generally equivalent to the better known Richter magnitude scale.
- Field et al. 2013, p. 2.
- Allen, Clarence R. (December 1976), "Responsibilities in earthquake prediction", Bulletin of the Seismological Society of America, 66 (6): 2069–2074.
- Bakun, W. H.; Lindh, A. G. (16 August 1985), "The Parkfield, California, Earthquake Prediction Experiment" (PDF), Science, 229 (4714): 619–624, Bibcode:1985Sci...229..619B, doi:10.1126/science.229.4714.619, PMID 17739363.
- Castellaro, S. (2003), "§2.4.3. The classical earthquake model", in Mulargia, Francesco; Geller, Robert J., Earthquake science and seismic risk reduction, Dordrecht: Kluwer Academic Publishers, pp. 56–57, ISBN 9781402017780.
- Console, R. (30 August 2001), "Testing earthquake forecast hypotheses", Tectonophysics, 338 (3–4): 261–268, Bibcode:2001Tectp.338..261C, doi:10.1016/S0040-1951(01)00081-6.
- Evans, R. (December 1997), "Assessment of schemes for earthquake prediction: Editor's introduction", Geophysical Journal International, 131 (3): 413–420, Bibcode:1997GeoJI.131..413E, doi:10.1111/j.1365-246X.1997.tb06585.x.
- Field, Edward H.; Biasi, Glenn P.; Bird, Peter; Dawson, Timothy E.; Felzer, Karen R.; Jackson, David D.; Johnson, Kaj M.; Jordan, Thomas H.; Madden, Christopher; Michael, Andrew J.; Milner, Kevin R.; Page, Morgan T.; Parsons, Tom; Powers, Peter M.; Shaw, Bruce E.; Thatcher, Wayne R.; Weldon, Ray J., II; Zeng, Yuehua (2013), "Uniform California earthquake rupture forecast, version 3 (UCERF3) – The time-independent model", U.S. Geological Survey, Open-File Report 2013–1165. Also California Geological Survey Special Report 228, and Southern California Earthquake Center Publication 1792. Also published in the BSSA as Field et al. 2014.
- Geller, Robert J. (December 1997), "Earthquake prediction: a critical review." (PDF), Geophysical Journal International, 131 (3): 425–450, Bibcode:1997GeoJI.131..425G, doi:10.1111/j.1365-246X.1997.tb06588.x
- Geller, Robert J.; Jackson, David D.; Kagan, Yan Y.; Mulargia, Francesco (14 March 1997), "Earthquakes Cannot Be Predicted" (PDF), Science, 275 (5306): 1616, doi:10.1126/science.275.5306.1616.
- International Commission on Earthquake Forecasting for Civil Protection (30 May 2011), "Operational Earthquake Forecasting: State of Knowledge and Guidelines for Utilization", Annals of Geophysics, 54 (4): 315–391, doi:10.4401/ag-5350.
- Jackson, David D.; Kagan, Yan Y. (September 2006), "The 2004 Parkfield earthquake, the 1985 prediction, and characteristic earthquakes: Lessons for the future" (PDF), Bulletin of the Seismological Society of America, 96 (4B): S397–S409, Bibcode:2006BuSSA..96S.397J, doi:10.1785/0120050821.
- Kagan, Yan Y. (December 1997b), "Are earthquakes predictable?" (PDF), Geophysical Journal International, 131 (3): 505–525, Bibcode:1997GeoJI.131..505K, doi:10.1111/j.1365-246X.1997.tb06595.x.
- Kagan, Yan Y.; Jackson, David D. (10 December 1991), "Seismic Gap Hypothesis: Ten Years After" (PDF), Journal of Geophysical Research, 96 (B13): 21, 419–21, 431, Bibcode:1991JGR....9621419K, doi:10.1029/91jb02210.
- Kagan, Yan Y.; Jackson, David D. (27 May 1996), "Statistical tests of VAN earthquake predictions: comments and reflections" (PDF), Geophysical Research Letters, 23 (11): 1433–1436, Bibcode:1996GeoRL..23.1433K, doi:10.1029/95GL03786[permanent dead link].
- Kanamori, Hiroo (2003), "Earthquake Prediction: An Overview", International Handbook of Earthquake and Engineering Seismology, International Geophysics, 616: 1205–1216, doi:10.1016/s0074-6142(03)80186-9, ISBN 0-12-440658-0.
- Lomnitz, Cinna; Nava, F. Alejandro (December 1983), "The predictive value of seismic gaps.", Bulletin of the Seismological Society of America, 73 (6A): 1815–1824.
- McCann, W. R.; Nishenko, S. P.; Sykes, L. R.; Krause, J. (1979), "Seismic gaps and plate tectonics: Seismic potential for major boundaries", Pure and Applied Geophysics, 117 (6): 1082–1147, Bibcode:1979PApGe.117.1082M, doi:10.1007/BF00876211.
- Reid, Harry Fielding (1910), "The Mechanics of the Earthquake.", The California Earthquake of April 18, 1906: Report of the State Earthquake Investigation Commission, Vol. 2.
- Rong, Yufang; Jackson, David D.; Kagan, Yan Y. (October 2003), "Seismic gaps and earthquakes" (PDF), Journal of Geophysical Research, 108 (B10): 1–14, Bibcode:2003JGRB..108.2471R, doi:10.1029/2002JB002334.
- Scholz, Christopher H. (2002), The Mechanics of earthquakes and faulting (2nd ed.), Cambridge Univ. Press, ISBN 0-521-65223-5.
- Schwartz, David P.; Coppersmith, Kevin J. (10 July 1984), "Fault Behavior and Characteristic Earthquakes: Examples From the Wasatch and San Andreas Fault Zones", Journal of Geophysical Research, 89 (B7): 5681–5698, Bibcode:1984JGR....89.5681S, doi:10.1029/JB089iB07p05681.
- Tiampo, Kristy F.; Shcherbakov, Robert (2012), "Seismicity-based earthquake forecasting techniques: Ten years of progress" (PDF), Tectonophysics, 522—523: 89–121, Bibcode:2012Tectp.522...89T, doi:10.1016/j.tecto.2011.08.019, archived from the original (PDF) on 2016-05-16.
- Wells, D. L.; Coppersmith, K. J. (August 1994), "New empirical relationships among magnitude, rupture length, rupture width, rupture area, and surface displacement." (PDF), Bulletin of the Seismological Society of America, 84 (4): 974–1002.
- Wood, H. O.; Gutenberg, B. (6 September 1935), "Earthquake prediction" (PDF), Science, 82 (2123): 219–320, Bibcode:1935Sci....82..219W, doi:10.1126/science.82.2123.219.
- Zoback, Mary Lou (April–May 2006), "The 1906 earthquake and a century of progress in understanding earthquakes and their hazards" (PDF), GSA Today, 16 (r/5): 4–11, doi:10.1130/GSAT01604.1.