Vesterbro is one of the 15 administrative and city tax districts comprising the municipality of Copenhagen, Denmark. It covers an area of 3.76 km², and has a population of 51,466, the district is located west of the city center at the location of the old Western Gate, access way into the old city. The name Vesterbro literally translates into English as Western Bridge, Vesterbro is the area of the bridge into the city of Copenhagen, which was a much smaller city at the time when the name was created. At that time, the city was ringed by a moat which exist today as the Tivoli lake, the area is under the process of being renovated to a great extent and the renovation will end in 2017. The environment and sustainability is one of the reasons for the renovation. Vesterbro has a location that makes it a favored place to live. The area is known as the easy place to get drugs in Copenhagen. Vesterbro was originally the name of the country road that led into the city center from the west. Few country roads in those days were paved, but the amount of traffic into the capital necessitated it.
Until 1853 after the epidemic that had hit Copenhagen, there had been a no build zone outside Copenhagen’s old part of town. This Demarcation Line indicated an area beyond the city’s centuries old defense wall system where Copenhagen’s defense forces could strike the enemy unhindered, until there was little development outside the center of the city, except with special permission. Even though much of the area was used as grazing land,1,000 inhabitants of the area, as well as a number of commercial enterprises, and the house of the Royal Copenhagen Shooting Society and Danish Brotherhood. The society received permission to build outside the old city limits in the 1750s, and this movement came first to the inner ring of areas outside the center, the Indre Østerbro, the Indre Nørrebro and Frederiksberg. At that time the name Vesterbro began being used for the area around the street named Vesterbro
Building material is any material which is used for construction purposes. Many naturally occurring substances, such as clay, sand, apart from naturally occurring materials, many man-made products are in use, some more and some less synthetic. They provide the make-up of habitats and structures including homes and these trends tend to increase the initial and long term economic, ecological and social costs of building materials. The initial economic cost of building materials is the purchase price and this is often what governs decision making about what materials to use. Sometimes people take into consideration the energy savings or durability of the materials, for example, an asphalt shingle roof costs less than a metal roof to install, but the metal roof will last longer so the lifetime cost is less per year. Some materials may require more care than others, maintaining costs specific to some materials may influence the final decision. Risks when considering lifetime cost of a material is if the building is damaged such as by fire or wind, the cost of materials should be taken into consideration to bear the risk to buy combustive materials to enlarge the lifetime.
It is said that, if it must be done, it must be done well, pollution costs can be macro and micro. An example of the aspect of pollution is the off-gassing of the building materials in the building or indoor air pollution. Red List building materials are found to be harmful. Also the carbon footprint, the set of greenhouse gas emissions produced in the life of the material. A life-cycle analysis includes the reuse, recycling, or disposal of construction waste, two concepts in building which account for the ecological economics of building materials are green building and sustainable development. Initial energy costs include the amount of energy consumed to produce, the long term energy cost is the economic and social costs of continuing to produce and deliver energy to the building for its use and eventual removal. The initial embodied energy of a structure is the energy consumed to extract, deliver, social costs are injury and health of the people producing and transporting the materials and potential health problems of the building occupants if there are problems with the building biology.
Aspects of fair trade and labor rights are social costs of building material manufacturing. These were variously named wikiups, lean-tos, and so forth, an extension on the brush building idea is the wattle and daub process in which clay soils or dung, usually cow, are used to fill in and cover a woven brush structure. This gives the more thermal mass and strength. Wattle and daub is one of the oldest building techniques, many older timber frame buildings incorporate wattle and daub as non load bearing walls between the timber frames
Christian's Church, Copenhagen
Christians Church is a magnificent Rococo church in the Christianshavn district of Copenhagen, Denmark. Designed by Nicolai Eigtved, it was built 1754–59, the church was originally built by the German community as a church for the large German community at Christianshavn and served this purpose until the end of the 19th century. Today it is a parish church for Christians Parish within the Danish National Church. Its name is a reference to King Christian IV. who founded the Christianshavn district in 1611, after Christian IV founded Christianshavn in 1617 as a town specially for merchants, a large community of German tradrers and craftsmen settled there. This lasted until they finally asked King Christian VI for permission to build their own church, the King approved the plans and contributed with a lot, a former saltern, located at the end of Strandgade in the southern part of the neighbourhood. He granted permission for a lottery to be held to cover the financing with the result that the finished church used to be colloquially known as the Lottery Church.
In return for his approaval and donation of the lot, the laid down very specific guidelines for the placement. Nicolai Eigtved, the preferred architect at the time, was charged with the design of the new church but died in 1754. Instead his son-in-law, Royal Master Builder Georg David Anthon, was entrusted with supervising the construction of the church which was completed in 1759. Anthon designed the spire which is an addition from 1769, the church originally called Frederiks German Church, and served its original purpose as a church for the German congregation until it was dissolved in 1886. Since 1991 it has been a parish church for Christians Parish which includes part of Christianshavn as well as Slotsholmen. The church has a layout, the nave occupying the space between the shorter rather than the longer sides of the rectangle, giving it exceptional width. Standing on a plinth, the church is a yellow brick building with sandstone finishing for the portal. Ionic pilasters decorate the portal and the windows are tall.
The tower stands 70 metres high, designed by Eigtveds son-in-law D. G. Anthon, the spire was added in 1769. The tower is positioned at the centre of the side which serves as the main facade. The unusual interior of Christians Church is reminiscent of a theatre, in addition to the benches on either side of the nave, three tiers of galleries complete with boxes rise the full height of the building on the northern and southern sides. They are all arranged to provide the congregation with an excellent view of the podium on the side which is reminiscent of a stage
Vesterbrogade is the main shopping street of the Vesterbro district of Copenhagen, Denmark. The 1.5 km long street runs from the City Hall Square in the east to Pile Allé in Frederiksberg in the west where it turns into Roskildevej, on its way, it passes Copenhagen Central Station as well as the small triangular square Vesterbros Torv. It is one of four such -bro streets, the other being Nørrebrogade, Østerbrogade and Amagerbrogade, vesterbroghade originates in the 12th-century country road that led in and out of Copenhagens Western City Gate. The road passed Sankt Jørgens Bæk on its way to Valby, on 20 August 1624, Christian IV ordered that the road be cobbled, first to Vernedamsvej and all the way to Valby. The road was at this point called Alvejen (The Public Road= or Adelvejen and it is one of four such -bro streets. New buildings began to long the street in the 1850s. In 1866–67, Vesterbrogade was extended in a line from Tivoli to the Haymarket. The first section of the street, between the Vity Hall Square and the new Central Central Station, was out as a broad.
Among the buildings that were built along it, including Industriforeningens new Exhibition Building from 1872, at the turn of the 20th century, Vesterbros Passage was the backbone in a westward expansion of Copenhagens city centre. Most of the old buildings were replaced by new and larger ones over the course of the next decades, industriens Hus is the headquarters of the Confederation of Danish Industries. An expansion and complete make-over of the building was completed in 2013, next to the building is the main entrance of Tivoli Gardens. Saxo Towers, a complex consisting of four interconnected culinders, is currently under construction on the other side of the street. Axelborg, originally a building, now contains the headquarters of the Danish Agriculture. The former SAS Royal Hotel, now operated by Radison Blu, was designed by Arne Jacobsen and his Egg and Swan chairs were designed for the building. AArbejdernes Landsbank has their headquarters in the so-called Panoptikon Building at No.5, the small Savoy Hotel, known as Løvenborg, is one of the earliest examples of the art nouveau style in Copenhagen.
The building was designed by Anton Rosen who a few years designed the two buildings that flank thDet Ny Teater in the same style. The Association of Danish Law Firms is based at No.32, the Royal Copenhagen Shooting Societys former main building at No.59 is from 1780s. It now houses the Museum of Copenhagen, the former Vesterbro Pharmacy was built in 1853 to design by P. C
Church of Holmen
The Church of Holmen is a Parish church in central Copenhagen in Denmark, on the street called Holmens Kanal. First built as a forge in 1563, it was converted into a naval church by Christian IV. It is famous for having hosted the wedding between Margrethe II of Denmark, current queen of Denmark, and Prince Henrik in 1967, the appearance of the Church of Holmen today closely resembles that of the renovation in 1872, except for the colour. The windows are in glass and predominantly set in iron. The spire is dressed in copper just like small spire on the confessionals roof, the church is of Lutheran denomination. The churchs pipe organ was made by Lambert Daniel Kastens and installed in 1738. The actual organ, however, is from 1956, the current pulpit was installed in 1662 and was carved by Abel Schrøder and stands in the natural colour of its oak, except for the kings monogram which is gilded. It is the oldest preserved pulpit in Copenhagen, and the most richly decorated and it stands from floor to ceiling, and depicts Christian history from Moses holding the basket up to Jesus Christ.
The oldest baptismal font in the church is in wrought iron, a white marble font was installed in 1756, created by Carl Frederik Stanley in classicist style, but is no longer in the church. The new baptismal font from 1872 was made by the sculptor Evens by Ludvig Fengers design, in black marble, a model of Niels Juels ship Christianus Quintus hangs from the ceiling in the church. In medieval Copenhagen, Holmen was an actual island, however, in the 16th century, city restructuring made it less of an island and more of a peninsula surrounded by Holmens Canal. On this peninsula, Christian III of Denmark founded a shipyard which became synonymous with the name Holmen, when the shipyard moved to Nyholm on Christianshavn, the name Holmen followed, and Bremerholm became Gammelholm, a name which is rarely used today. Holmens Canal was filled in the 1860s, but the lives on as a street. In 1562–63, Frederick II of Denmark built a forge for Holmen. The building was shaped, as special consideration was given not to spoil the view from the kings castle.
The actual forge was hidden behind a building, called the tower, which was given a handsome front in Italian style facing the castle. In 1617, Christian IV of Denmark has built houses for the navys personnel between the Church of Saint Nikolaj and Holmen and this created an influx in population which made it necessary to build a larger church, which the king had set up in the former anchor forge. At first, the reconstruction into a church caused no redesign of the buildings blueprints, the church was consecrated on September 5,1619, but craftsmen were still working on the church during 1620
A barrel vault, known as a tunnel vault or a wagon vault, is an architectural element formed by the extrusion of a single curve along a given distance. The curves are typically circular in shape, lending a semi-cylindrical appearance to the total design, the barrel vault is the simplest form of a vault, effectively a series of arches placed side by side. It is a form of barrel roof, as with all arch-based constructions, there is an outward thrust generated against the walls underneath a barrel vault. There are several mechanisms for absorbing this thrust, one is, of course, to make the walls exceedingly thick and strong - this is a primitive and sometimes unacceptable method. A more elegant method is to two or more vaults parallel to each other, the forces of their outward thrusts will thus negate each other. This method was most often used in construction of churches, where several vaulted naves ran parallel down the length of the building, the outer walls of the outermost vault would still have to be quite strong or reinforced by buttressing.
The third and most elegant mechanism to resist the lateral thrust was to create an intersection of two barrel vaults at right angles, thus forming a groin vault, Barrel vaults are known from Ancient Egypt, and were used extensively in Roman architecture. They were used to replace the Cloaca Maxima with a system of underground sewers, other early barrel vault designs occur in northern Europe, Turkey and other regions. In medieval Europe, the vault was an important element of stone construction in monasteries, tower houses. This form of design is observed in cellars, long hallways, Barrel vaulting was known and utilized by early civilizations, including Ancient Egypt and Mesopotamia. However, it apparently was not a popular or common method of construction within these civilizations. The Persians and the Romans were the first to make significant architectural use of them, the technique probably evolved out of necessity to roof buildings with masonry elements such as bricks or stone blocks in areas where timber and wood were scarce.
The earliest tunnel vaults in Egypt are found at Requagnah and Denderah and these were built with sun-dried brick in three rings over passages descending to tombs, in these cases, as the span of the vault was only two metres. Ancient Romans most probably inherited their knowledge of barrel vaulting from Etruscans, after the fall of the Roman empire, few buildings large enough to require much in the way of vaulting were built for several centuries. In the early Romanesque period, a return to stone barrel vaults was seen for the first great cathedrals, their interiors were dark, due to thick. One of the largest and most famous churches enclosed from above by a vast barrel vault was the church of Cluny Abbey, peters Basilica in Rome, where a huge barrel vault spans the 27 m -wide nave. With a barrel vault design the vectors of pressure result in a force on the crown while the lower portions of the arches realise a lateral force pushing outwards. As an outcome this form of design is subject to failure unless the sides are anchored or buttressed to very heavy building elements or substantial earthwork sidings
Such ceremonies are often attended by dignitaries such as politicians and businessmen. The actual shovel or spade used during the actual groundbreaking is often a special ceremonial shovel meant to be saved for subsequent display, commemorative information may be subsequently engraved on the shovel. In some places, clergy may provide blessings, particularly if the building is being constructed by a church or religious-affiliated organization. The term groundbreaking, when used as an adjective, may mean being or making something that has never been done, seen, or made before, builders rites Topping out Cornerstone Publicity stunt Ribbon cutting ceremony Media related to Ground-breaking ceremonies at Wikimedia Commons
The krone is the official currency of Denmark and the Faroe Islands, introduced on 1 January 1875. Both the ISO code DKK and currency sign kr. are in use, the former precedes the value. The currency is referred to as the Danish crown in English. Historically, krone coins have been minted in Denmark since the 17th century, one krone is subdivided into 100 øre, the name øre possibly deriving from Latin aureus meaning gold coin. Altogether there are eleven denominations of the krone, with the smallest being the 50 øre coin, formerly there were more øre coins, but those were discontinued due to inflation. The krone is pegged to the euro via the ERM II, the oldest known Danish coin is a penny struck AD 825–840, but the earliest systematic minting produced the so-called korsmønter or cross coins minted by Harald Bluetooth in the late 10th century. Organised minting in Denmark was introduced on a larger scale by Canute the Great in the 1020s, for almost 1,000 years, Danish kings – with a few exceptions – have issued coins with their name, monogram and/or portrait.
Taxes were sometimes imposed via the coinage, e. g. by the substitution of coins handed in by new coins handed out with a lower silver content. Danish coinage was based on the Carolingian silver standard. Periodically, the value of the minted coins was reduced. This was mainly done to generate income for the monarch and/or the state, as a result of the debasement, the public started to lose trust in the respective coins. Danish currency was overhauled several times in attempts to restore public trust in the coins, in 1619 a new currency was introduced in Denmark, the krone. One krone had the value of 1 1/2 Danish Rigsdaler Species accounting for 96 Kroneskillinger, for 144 common Skillings, until the late 18th century, the krone was a denomination equal to 8 mark, a subunit of the Danish rigsdaler. A new krone was introduced as the currency of Denmark in January 1875 and it replaced the rigsdaler at a rate of 2 kroner =1 rigsdaler. This placed the krone on the standard at a rate of 2480 kroner =1 kilogram fine gold.
The latter part of the 18th century and much of the 19th century saw expanding economic activity, banknotes were increasingly used instead of coins. The introduction of the new krone was a result of the Scandinavian Monetary Union, the parties to the union were the three Scandinavian countries, where the name was krone in Denmark and Norway and krona in Sweden, a word which in all three languages literally means crown. The three currencies were on the standard, with the krone/krona defined as 1⁄2480 of a kilogram of pure gold
Copenhagen, Danish, København, Hafnia) is the capital and most populous city of Denmark. Copenhagen has an population of 1,280,371. The Copenhagen metropolitan area has just over 2 million inhabitants, the city is situated on the eastern coast of the island of Zealand, another small portion of the city is located on Amager, and is separated from Malmö, Sweden, by the strait of Øresund. The Øresund Bridge connects the two cities by rail and road, originally a Viking fishing village founded in the 10th century, Copenhagen became the capital of Denmark in the early 15th century. Beginning in the 17th century it consolidated its position as a centre of power with its institutions, defences. After suffering from the effects of plague and fire in the 18th century and this included construction of the prestigious district of Frederiksstaden and founding of such cultural institutions as the Royal Theatre and the Royal Academy of Fine Arts. Later, following the Second World War, the Finger Plan fostered the development of housing, since the turn of the 21st century, Copenhagen has seen strong urban and cultural development, facilitated by investment in its institutions and infrastructure.
The city is the cultural and governmental centre of Denmark, Copenhagens economy has seen rapid developments in the service sector, especially through initiatives in information technology and clean technology. Since the completion of the Øresund Bridge, Copenhagen has become integrated with the Swedish province of Scania and its largest city, Malmö. With a number of connecting the various districts, the cityscape is characterized by parks, promenades. Copenhagen is home to the University of Copenhagen, the Technical University of Denmark, the University of Copenhagen, founded in 1479, is the oldest university in Denmark. Copenhagen is home to the FC København and Brøndby football clubs, the annual Copenhagen Marathon was established in 1980. Copenhagen is one of the most bicycle-friendly cities in the world, the Copenhagen Metro serves central Copenhagen while the Copenhagen S-train network connects central Copenhagen to its outlying boroughs. Serving roughly 2 million passengers a month, Copenhagen Airport, Kastrup, is the largest airport in the Nordic countries, the name of the city reflects its origin as a harbour and a place of commerce.
The original designation, from which the contemporary Danish name derives, was Køpmannæhafn, meaning merchants harbour, the literal English translation would be Chapmans haven. The English name for the city was adapted from its Low German name, the abbreviations Kbh. or Kbhvn are often used in Danish for København, and kbh. for københavnsk. The chemical element hafnium is named for Copenhagen, where it was discovered, the bacterium Hafnia is named after Copenhagen, Vagn Møller of the State Serum Institute in Copenhagen named it in 1954. Excavations in Pilestræde have led to the discovery of a well from the late 12th century, the remains of an ancient church, with graves dating to the 11th century, have been unearthed near where Strøget meets Rådhuspladsen
Palm Sunday is a Christian moveable feast that falls on the Sunday before Easter. The feast commemorates Jesus triumphal entry into Jerusalem, an event mentioned in each of the four canonical Gospels, the difficulty of procuring palms in unfavorable climates led to their substitution with branches of native trees, including box, olive and yew. The Sunday was often named after these trees, as in Yew Sunday. In the accounts of the four canonical Gospels, Jesus triumphal entry into Jerusalem takes place about a week before his Resurrection and it suggests that Jesus was declaring he was the King of Israel to the anger of the Sanhedrin. Blessed is He who comes in the name of the Lord and we bless you from the house of the Lord. The symbolism of the donkey may refer to the Eastern tradition that it is an animal of peace, versus the horse, a king would have ridden a horse when he was bent on war and ridden a donkey to symbolize his arrival in peace. Jesus entry to Jerusalem would have thus symbolized his entry as the Prince of Peace, not as a war-waging king.
In Luke 19,41 as Jesus approaches Jerusalem, he looks at the city and weeps over it, in many lands in the ancient Near East, it was customary to cover in some way the path of someone thought worthy of the highest honour. The Hebrew Bible reports that Jehu, son of Jehoshaphat, was treated this way, both the Synoptic Gospels and the Gospel of John report that people gave Jesus this form of honour. In the synoptics the people are described as laying their garments and cut rushes on the street, in Jewish tradition, the palm is one of the Four Species carried for Sukkot, as prescribed for rejoicing at Leviticus 23,40. In the Greco-Roman culture of the Roman Empire, which strongly influenced Christian tradition and it became the most common attribute of the goddess Nike or Victory. Although the Epistles of Paul refer to Jesus as triumphing, the entry into Jerusalem may not have been pictured as a triumphal procession in this sense before the 13th century. In ancient Egyptian religion, the palm was carried in funeral processions, the palm branch was used as a symbol of Christian martyrs and their spiritual victory or triumph over death.
In Revelation 7,9, the white-clad multitude stand before the throne, Palm Sunday, or the Entry of the Lord into Jerusalem, as it is often called in some Orthodox Churches, is one of the Twelve Great Feasts of the liturgical year. The day before Palm Sunday, Lazarus Saturday, believers often prepare palm fronds by knotting them into crosses in preparation for the procession on Sunday, the hangings and vestments in the church are changed to a festive colour—gold in the Greek tradition, and green in the Slavic tradition. Wherefore, we like children, carry the banner of triumph and victory, blessed is He that cometh in the Name of the Lord. There is no requirement as to what kind of branches must be used. Whatever the kind, these branches are blessed and distributed together with candles either during the All-Night Vigil on the Eve of the Feast, the faithful take these branches and candles home with them after the service, and keep them in their icon corner as an evloghia
A timing belt, toothed belt, cogged belt or cog belt, or synchronous belt is a non-slipping mechanical drive belt. It is made as a belt with teeth moulded onto its inner surface. It runs over matching toothed pulleys or sprockets, when correctly tensioned, they have no slippage and are often used to transfer motion for indexing or timing purposes. They are often used in lieu of chains or gears, so there is less noise, toothed belts are used widely in mechanical devices, including sewing machines and many others. A major use of toothed belts is as the belt used to drive the camshafts within an automobile engine. As toothed belts can deliver more power than a friction-drive belt and these include the primary drive of some motorcycles, notably Harley-Davidsons. Also the supercharger used for dragsters, microlight aircraft driven by high-speed two-stroke engines such as the Rotax 532 use toothed belt reduction drives to allow the use of a quieter and more efficient slower-speed propeller. Some amateur built airplanes powered by automotive engines use cog belt reduction drive units and these belts are made of a flexible polymer over a fabric reinforcement.
Originally this was rubber over a natural textile, but developments in science have had a substantial effect in increasing the lifetime of these belts. This included changes from natural to synthetic rubber and polyurethane and the adoption of nylon, Kevlar or other aramid fibres, toothed belts have two failure modes, one gradual and one catastrophic. Both increase their risk over time, so it is common for highly-stressed belts to be given a service lifetime, one failure mode is gradual wear to the tooth shape, which may eventually lead to slippage over rounded teeth. The belt often continues to work, but the timing between shafts changes. The catastrophic failure mode is caused by delamination between the belt and its fabric reinforcement, although this may be caused by age and wear, it is often accelerated by mistreatment of the belt, often during initial installation. Another cause, particularly with natural rubber belts, is contamination by oil, especially to the edges where the fabric is exposed.
It is extremely rare for a belt to break. More common is for the belt to delaminate, disconnecting the fabric strength member from the teeth that ride on the pulleys, the belt is often thrown from the pulleys and may be further damaged, or cut. Although worn teeth may be detectable by careful inspection, internal deterioration is not considered to be reliably detectable and so the observance of service lifetimes is important