1.
Pyramid (geometry)
–
In geometry, a pyramid is a polyhedron formed by connecting a polygonal base and a point, called the apex. Each base edge and apex form a triangle, called a lateral face and it is a conic solid with polygonal base. A pyramid with a base has n +1 vertices, n +1 faces. A right pyramid has its apex directly above the centroid of its base, nonright pyramids are called oblique pyramids. A regular pyramid has a polygon base and is usually implied to be a right pyramid. When unspecified, a pyramid is usually assumed to be a square pyramid. A triangle-based pyramid is often called a tetrahedron. Among oblique pyramids, like acute and obtuse triangles, a pyramid can be called if its apex is above the interior of the base and obtuse if its apex is above the exterior of the base. A right-angled pyramid has its apex above an edge or vertex of the base, in a tetrahedron these qualifiers change based on which face is considered the base. Pyramids are a subclass of the prismatoids, pyramids can be doubled into bipyramids by adding a second offset point on the other side of the base plane. A right pyramid with a base has isosceles triangle sides, with symmetry is Cnv or. It can be given an extended Schläfli symbol ∨, representing a point, a join operation creates a new edge between all pairs of vertices of the two joined figures. The trigonal or triangular pyramid with all equilateral triangles faces becomes the regular tetrahedron, a lower symmetry case of the triangular pyramid is C3v, which has an equilateral triangle base, and 3 identical isosceles triangle sides. The square and pentagonal pyramids can also be composed of convex polygons. Right pyramids with regular star polygon bases are called star pyramids, for example, the pentagrammic pyramid has a pentagram base and 5 intersecting triangle sides. A right pyramid can be named as ∨P, where is the point, ∨ is a join operator. It has C1v symmetry from two different base-apex orientations, and C2v in its full symmetry, a rectangular right pyramid, written as ∨, and a rhombic pyramid, as ∨, both have symmetry C2v. The volume of a pyramid is V =13 b h and this works for any polygon, regular or non-regular, and any location of the apex, provided that h is measured as the perpendicular distance from the plane containing the base

2.
Prism (geometry)
–
In geometry, a prism is a polyhedron comprising an n-sided polygonal base, a second base which is a translated copy of the first, and n other faces joining corresponding sides of the two bases. All cross-sections parallel to the bases are translations of the bases, prisms are named for their bases, so a prism with a pentagonal base is called a pentagonal prism. The prisms are a subclass of the prismatoids, a right prism is a prism in which the joining edges and faces are perpendicular to the base faces. This applies if the faces are rectangular. If the joining edges and faces are not perpendicular to the base faces, for example a parallelepiped is an oblique prism of which the base is a parallelogram, or equivalently a polyhedron with six faces which are all parallelograms. A truncated prism is a prism with nonparallel top and bottom faces, some texts may apply the term rectangular prism or square prism to both a right rectangular-sided prism and a right square-sided prism. A right p-gonal prism with rectangular sides has a Schläfli symbol ×, a right rectangular prism is also called a cuboid, or informally a rectangular box. A right square prism is simply a box, and may also be called a square cuboid. A right rectangular prism has Schläfli symbol ××, an n-prism, having regular polygon ends and rectangular sides, approaches a cylindrical solid as n approaches infinity. The term uniform prism or semiregular prism can be used for a prism with square sides. A uniform p-gonal prism has a Schläfli symbol t, right prisms with regular bases and equal edge lengths form one of the two infinite series of semiregular polyhedra, the other series being the antiprisms. The dual of a prism is a bipyramid. The volume of a prism is the product of the area of the base, the volume is therefore, V = B ⋅ h where B is the base area and h is the height. The volume of a prism whose base is a regular n-sided polygon with side s is therefore. The surface area of a prism is 2 · B + P · h, where B is the area of the base, h the height. The surface area of a prism whose base is a regular n-sided polygon with side length s and height h is therefore. The rotation group is Dn of order 2n, except in the case of a cube, which has the symmetry group O of order 24. The symmetry group Dnh contains inversion iff n is even, a prismatic polytope is a higher-dimensional generalization of a prism

3.
Polyhedron
–
In geometry, a polyhedron is a solid in three dimensions with flat polygonal faces, straight edges and sharp corners or vertices. The word polyhedron comes from the Classical Greek πολύεδρον, as poly- + -hedron, a convex polyhedron is the convex hull of finitely many points, not all on the same plane. Cubes and pyramids are examples of convex polyhedra, a polyhedron is a 3-dimensional example of the more general polytope in any number of dimensions. Convex polyhedra are well-defined, with several equivalent standard definitions, however, the formal mathematical definition of polyhedra that are not required to be convex has been problematic. Many definitions of polyhedron have been given within particular contexts, some more rigorous than others, some of these definitions exclude shapes that have often been counted as polyhedra or include shapes that are often not considered as valid polyhedra. As Branko Grünbaum observed, The Original Sin in the theory of polyhedra goes back to Euclid, the writers failed to define what are the polyhedra. Nevertheless, there is agreement that a polyhedron is a solid or surface that can be described by its vertices, edges, faces. Natural refinements of this definition require the solid to be bounded, to have a connected interior, and possibly also to have a connected boundary. However, the polyhedra defined in this way do not include the self-crossing star polyhedra, their faces may not form simple polygons, definitions based on the idea of a bounding surface rather than a solid are also common. If a planar part of such a surface is not itself a convex polygon, ORourke requires it to be subdivided into smaller convex polygons, cromwell gives a similar definition but without the restriction of three edges per vertex. Again, this type of definition does not encompass the self-crossing polyhedra, however, there exist topological polyhedra that cannot be realized as acoptic polyhedra. One modern approach is based on the theory of abstract polyhedra and these can be defined as partially ordered sets whose elements are the vertices, edges, and faces of a polyhedron. A vertex or edge element is less than an edge or face element when the vertex or edge is part of the edge or face, additionally, one may include a special bottom element of this partial order and a top element representing the whole polyhedron. However, these requirements are relaxed, to instead require only that the sections between elements two levels apart from line segments. Geometric polyhedra, defined in other ways, can be described abstractly in this way, a realization of an abstract polyhedron is generally taken to be a mapping from the vertices of the abstract polyhedron to geometric points, such that the points of each face are coplanar. A geometric polyhedron can then be defined as a realization of an abstract polyhedron, realizations that forgo the requirement of planarity, that impose additional requirements of symmetry, or that map the vertices to higher dimensional spaces have also been considered. Unlike the solid-based and surface-based definitions, this perfectly well for star polyhedra. However, without restrictions, this definition allows degenerate or unfaithful polyhedra

4.
Face (geometry)
–
In solid geometry, a face is a flat surface that forms part of the boundary of a solid object, a three-dimensional solid bounded exclusively by flat faces is a polyhedron. In more technical treatments of the geometry of polyhedra and higher-dimensional polytopes, in elementary geometry, a face is a polygon on the boundary of a polyhedron. Other names for a polygonal face include side of a polyhedron, for example, any of the six squares that bound a cube is a face of the cube. Sometimes face is used to refer to the 2-dimensional features of a 4-polytope. With this meaning, the 4-dimensional tesseract has 24 square faces, some other polygons, which are not faces, are also important for polyhedra and tessellations. These include Petrie polygons, vertex figures and facets, any convex polyhedrons surface has Euler characteristic V − E + F =2, where V is the number of vertices, E is the number of edges, and F is the number of faces. This equation is known as Eulers polyhedron formula, thus the number of faces is 2 more than the excess of the number of edges over the number of vertices. For example, a cube has 12 edges and 8 vertices, in higher-dimensional geometry the faces of a polytope are features of all dimensions. A face of dimension k is called a k-face, for example, the polygonal faces of an ordinary polyhedron are 2-faces. In set theory, the set of faces of a polytope includes the polytope itself, for any n-polytope, −1 ≤ k ≤ n. For example, with meaning, the faces of a cube include the empty set, its vertices, edges and squares. Formally, a face of a polytope P is the intersection of P with any closed halfspace whose boundary is disjoint from the interior of P, from this definition it follows that the set of faces of a polytope includes the polytope itself and the empty set. In other areas of mathematics, such as the theories of abstract polytopes and star polytopes, abstract theory still requires that the set of faces include the polytope itself and the empty set. A cell is an element of a 4-dimensional polytope or 3-dimensional tessellation. Cells are facets for 4-polytopes and 3-honeycombs, examples, In higher-dimensional geometry, the facets of a n-polytope are the -faces of dimension one less than the polytope itself. A polytope is bounded by its facets, for example, The facets of a line segment are its 0-faces or vertices. The facets of a polygon are its 1-faces or edges, the facets of a polyhedron or plane tiling are its 2-faces. The facets of a 4D polytope or 3-honeycomb are its 3-faces, the facets of a 5D polytope or 4-honeycomb are its 4-faces

5.
Regular polyhedron
–
A regular polyhedron is a polyhedron whose symmetry group acts transitively on its flags. A regular polyhedron is highly symmetrical, being all of edge-transitive, vertex-transitive and face-transitive, in classical contexts, many different equivalent definitions are used, a common one is that faces are congruent regular polygons which are assembled in the same way around each vertex. A regular polyhedron is identified by its Schläfli symbol of the form, there are 5 finite convex regular polyhedra, known as the Platonic solids. These are the, tetrahedron, cube, octahedron, dodecahedron and icosahedron, there are also four regular star polyhedra, making nine regular polyhedra in all. All the dihedral angles of the polyhedron are equal All the vertex figures of the polyhedron are regular polygons, All the solid angles of the polyhedron are congruent. A regular polyhedron has all of three related spheres which share its centre, An insphere, tangent to all faces, an intersphere or midsphere, tangent to all edges. A circumsphere, tangent to all vertices, the regular polyhedra are the most symmetrical of all the polyhedra. They lie in just three symmetry groups, which are named after them, Tetrahedral Octahedral Icosahedral Any shapes with icosahedral or octahedral symmetry will also contain tetrahedral symmetry, the five Platonic solids have an Euler characteristic of 2. Some of the stars have a different value. The sum of the distances from any point in the interior of a polyhedron to the sides is independent of the location of the point. However, the converse does not hold, not even for tetrahedra, in a dual pair of polyhedra, the vertices of one polyhedron correspond to the faces of the other, and vice versa. The regular polyhedra show this duality as follows, The tetrahedron is self-dual, the cube and octahedron are dual to each other. The icosahedron and dodecahedron are dual to each other, the small stellated dodecahedron and great dodecahedron are dual to each other. The great stellated dodecahedron and great icosahedron are dual to each other, the Schläfli symbol of the dual is just the original written backwards, for example the dual of is. See also Regular polytope, History of discovery, stones carved in shapes resembling clusters of spheres or knobs have been found in Scotland and may be as much as 4,000 years old. Some of these stones show not only the symmetries of the five Platonic solids, examples of these stones are on display in the John Evans room of the Ashmolean Museum at Oxford University. Why these objects were made, or how their creators gained the inspiration for them, is a mystery, the earliest known written records of the regular convex solids originated from Classical Greece. When these solids were all discovered and by whom is not known, euclids reference to Plato led to their common description as the Platonic solids

6.
Octadecagon
–
An octadecagon or 18-gon is an eighteen-sided polygon. A regular octadecagon has a Schläfli symbol and can be constructed as a truncated enneagon, t. As 18 =2 ×32, a regular octadecagon cannot be constructed using a compass, however, it is constructible using neusis, or an angle trisection with a tomahawk. The following approximate construction is similar to that of the enneagon. It is also feasible with exclusive use of compass and straightedge, the regular octadecagon has Dih18 symmetry, order 36. There are 5 subgroup dihedral symmetries, Dih9, and, and 6 cyclic group symmetries and these 15 symmetries can be seen in 12 distinct symmetries on the octadecagon. John Conway labels these by a letter and group order, full symmetry of the regular form is r36 and no symmetry is labeled a1. The dihedral symmetries are divided depending on whether they pass through vertices or edges, cyclic symmetries in the middle column are labeled as g for their central gyration orders. Each subgroup symmetry allows one or more degrees of freedom for irregular forms, only the g18 subgroup has no degrees of freedom but can seen as directed edges. A regular triangle, nonagon, and octadecagon can completely surround a point in the plane, one of 17 different combinations of polygons with this property. The regular octadecagon can tessellate the plane with concave hexagonal gaps, and another tiling mixes in nonagons and octagonal gaps. The first tiling is related to a hexagonal tiling. An octadecagram is an 18-sided star polygon, represented by symbol, there are two regular star polygons, and, using the same points, but connecting every fifth or seventh points. Deeper truncations of the regular enneagon and enneagrams can produce isogonal intermediate octadecagram forms with equally spaced vertices, other truncations form double coverings, t==2, t==2, t==2. The regular octadecagon is the Petrie polygon for a number of higher-dimensional polytopes, shown in these orthogonal projections from Coxeter planes, octadecagon Weisstein

7.
Heptadecagon
–
In geometry, a heptadecagon or 17-gon is a seventeen-sided polygon. A regular heptadecagon is represented by the Schläfli symbol, as 17 is a Fermat prime, the regular heptadecagon is a constructible polygon, this was shown by Carl Friedrich Gauss in 1796 at the age of 19. This proof represented the first progress in regular polygon construction in over 2000 years, constructing a regular heptadecagon thus involves finding the cosine of 2 π /17 in terms of square roots, which involves an equation of degree 17—a Fermat prime. Gauss book Disquisitiones Arithmeticae gives this as,16 cos 2 π17 = −1 +17 +34 −217 +217 +317 −34 −217 −234 +217. The explicit construction of a heptadecagon was given by Herbert William Richmond in 1893, the following method of construction uses Carlyle circles, as shown below. Make OI one-fourth of OB, and the angle OIE one-fourth of OIA, another more recent construction is given by Callagy. The regular heptadecagon has Dih17 symmetry, order 34, since 17 is a prime number there is one subgroup with dihedral symmetry, Dih1, and 2 cyclic group symmetries, Z17, and Z1. These 4 symmetries can be seen in 4 distinct symmetries on the heptadecagon, john Conway labels these by a letter and group order. Full symmetry of the form is r34 and no symmetry is labeled a1. The dihedral symmetries are divided depending on whether they pass through vertices or edges, cyclic symmetries in the middle column are labeled as g for their central gyration orders. Each subgroup symmetry allows one or more degrees of freedom for irregular forms, only the g17 subgroup has no degrees of freedom but can seen as directed edges. A heptadecagram is a 17-sided star polygon, there are seven regular forms given by Schläfli symbols, and. The regular heptadecagon is the Petrie polygon for one higher-dimensional regular convex polytope, projected in an orthogonal projection. – Describes the algebraic aspect, by Gauss, contains a description of the construction. Heptadecagon trigonometric functions heptadecagon building New R&D center for SolarUK BBC video of New R&D center for SolarUK Eisenbud, Heptadecagon Heptadecagon, a construction with only one point N, a variation of the design according to H. W. Richmond

8.
Monohedron
–
In geometry a monogon is a polygon with one edge and one vertex. Since a monogon has only one side and only one vertex, in Euclidean geometry a monogon is a degenerate polygon because its endpoints must coincide, unlike any Euclidean line segment. Most definitions of a polygon in Euclidean geometry do not admit the monogon, in spherical geometry, a monogon can be constructed as a vertex on a great circle. This forms a dihedron, with two hemispherical monogonal faces which share one 360° edge and one vertex and its dual, a hosohedron, has two antipodal vertices at the poles, one 360 degree lune face, and one edge between the two vertices. Digon Herbert Busemann, The geometry of geodesics, new York, Academic Press,1955 Coxeter, H. S. M, Regular Polytopes

9.
Dihedron
–
A dihedron is a type of polyhedron, made of two polygon faces which share the same set of edges. Dihedra have also been called bihedra, flat polyhedra, or doubly covered polygons, a regular dihedron is the dihedron formed by two regular polygons, which may be described by the Schläfli symbol. As a spherical polyhedron, each polygon of such a dihedron fills a hemisphere, the dual of a n-gonal dihedron is the n-gonal hosohedron, where n digon faces share two vertices. A dihedron can be considered a degenerate prism consisting of two n-sided polygons connected back-to-back, so that the object has no depth. The polygons must be congruent, but glued in such a way one is the mirror image of the other. This characterization holds also for the distances on the surface of a dihedron, as a spherical tiling, a dihedron can exist as nondegenerate form, with two n-sided faces covering the sphere, each face being a hemisphere, and vertices around a great circle. The regular polyhedron is self-dual, and is both a hosohedron and a dihedron, in the limit the dihedron becomes an apeirogonal dihedron as a 2-dimensional tessellation, A regular ditope is an n-dimensional analogue of a dihedron, with Schläfli symbol. It has two facets, which share all ridges, in common, polyhedron Polytope Weisstein, Eric W. Dihedron

10.
Hosohedron
–
In geometry, an n-gonal hosohedron is a tessellation of lunes on a spherical surface, such that each lune shares the same two polar opposite vertices. A regular n-gonal hosohedron has Schläfli symbol, with each spherical lune having internal angle 2π/n radians, the restriction m ≥3 enforces that the polygonal faces must have at least three sides. When considering polyhedra as a tiling, this restriction may be relaxed, since digons can be represented as spherical lunes. Allowing m =2 admits a new class of regular polyhedra. On a spherical surface, the polyhedron is represented as n abutting lunes, all these lunes share two common vertices. The digonal faces of a 2n-hosohedron, represents the fundamental domains of symmetry in three dimensions, Cnv, order 2n. The reflection domains can be shown as alternately colored lunes as mirror images, bisecting the lunes into two spherical triangles creates bipyramids and define dihedral symmetry Dnh, order 4n. The tetragonal hosohedron is topologically equivalent to the bicylinder Steinmetz solid, the dual of the n-gonal hosohedron is the n-gonal dihedron. The polyhedron is self-dual, and is both a hosohedron and a dihedron, a hosohedron may be modified in the same manner as the other polyhedra to produce a truncated variation. The truncated n-gonal hosohedron is the n-gonal prism, in the limit the hosohedron becomes an apeirogonal hosohedron as a 2-dimensional tessellation, Multidimensional analogues in general are called hosotopes. A regular hosotope with Schläfli symbol has two vertices, each with a vertex figure, the two-dimensional hosotope, is a digon. The term “hosohedron” was coined by H. S. M, Coxeter, and possibly derives from the Greek ὅσος “as many”, the idea being that a hosohedron can have “as many faces as desired”. Polyhedron Polytope McMullen, Peter, Schulte, Egon, Abstract Regular Polytopes, Cambridge University Press, ISBN 0-521-81496-0 Coxeter, H. S. M, ISBN 0-486-61480-8 Weisstein, Eric W. Hosohedron