The Kelvin scale is an absolute thermodynamic temperature scale using as its null point absolute zero, the temperature at which all thermal motion ceases in the classical description of thermodynamics. The kelvin is the base unit of temperature in the International System of Units; until 2018, the kelvin was defined as the fraction 1/273.16 of the thermodynamic temperature of the triple point of water. In other words, it was defined such that the triple point of water is 273.16 K. On 16 November 2018, a new definition was adopted, in terms of a fixed value of the Boltzmann constant. For legal metrology purposes, the new definition will come into force on 20 May 2019; the Kelvin scale is named after the Belfast-born, Glasgow University engineer and physicist William Thomson, 1st Baron Kelvin, who wrote of the need for an "absolute thermometric scale". Unlike the degree Fahrenheit and degree Celsius, the kelvin is not referred to or written as a degree; the kelvin is the primary unit of temperature measurement in the physical sciences, but is used in conjunction with the degree Celsius, which has the same magnitude.
The definition implies that absolute zero is equivalent to −273.15 °C. In 1848, William Thomson, made Lord Kelvin, wrote in his paper, On an Absolute Thermometric Scale, of the need for a scale whereby "infinite cold" was the scale's null point, which used the degree Celsius for its unit increment. Kelvin calculated; this absolute scale is known today as the Kelvin thermodynamic temperature scale. Kelvin's value of "−273" was the negative reciprocal of 0.00366—the accepted expansion coefficient of gas per degree Celsius relative to the ice point, giving a remarkable consistency to the accepted value. In 1954, Resolution 3 of the 10th General Conference on Weights and Measures gave the Kelvin scale its modern definition by designating the triple point of water as its second defining point and assigned its temperature to 273.16 kelvins. In 1967/1968, Resolution 3 of the 13th CGPM renamed the unit increment of thermodynamic temperature "kelvin", symbol K, replacing "degree Kelvin", symbol °K. Furthermore, feeling it useful to more explicitly define the magnitude of the unit increment, the 13th CGPM held in Resolution 4 that "The kelvin, unit of thermodynamic temperature, is equal to the fraction 1/273.16 of the thermodynamic temperature of the triple point of water."In 2005, the Comité International des Poids et Mesures, a committee of the CGPM, affirmed that for the purposes of delineating the temperature of the triple point of water, the definition of the Kelvin thermodynamic temperature scale would refer to water having an isotopic composition specified as Vienna Standard Mean Ocean Water.
In 2018, Resolution A of the 26th CGPM adopted a significant redefinition of SI base units which included redefining the Kelvin in terms of a fixed value for the Boltzmann constant of 1.380649×10−23 J/K. When spelled out or spoken, the unit is pluralised using the same grammatical rules as for other SI units such as the volt or ohm; when reference is made to the "Kelvin scale", the word "kelvin"—which is a noun—functions adjectivally to modify the noun "scale" and is capitalized. As with most other SI unit symbols there is a space between the kelvin symbol. Before the 13th CGPM in 1967–1968, the unit kelvin was called a "degree", the same as with the other temperature scales at the time, it was distinguished from the other scales with either the adjective suffix "Kelvin" or with "absolute" and its symbol was °K. The latter term, the unit's official name from 1948 until 1954, was ambiguous since it could be interpreted as referring to the Rankine scale. Before the 13th CGPM, the plural form was "degrees absolute".
The 13th CGPM changed the unit name to "kelvin". The omission of "degree" indicates that it is not relative to an arbitrary reference point like the Celsius and Fahrenheit scales, but rather an absolute unit of measure which can be manipulated algebraically. In science and engineering, degrees Celsius and kelvins are used in the same article, where absolute temperatures are given in degrees Celsius, but temperature intervals are given in kelvins. E.g. "its measured value was 0.01028 °C with an uncertainty of 60 µK." This practice is permissible because the degree Celsius is a special name for the kelvin for use in expressing relative temperatures, the magnitude of the degree Celsius is equal to that of the kelvin. Notwithstanding that the official endorsement provided by Resolution 3 of the 13th CGPM states "a temperature interval may be expressed in degrees Celsius", the practice of using both °C and K is widespread throughout the scientific world; the use of SI prefixed forms of the degree Celsius to express a temperature interval has not been adopted.
In 2005 the CIPM embarked on a programme to redefine the kelvin using a more experimentally rigorous methodology. In particular, the committee proposed redefining the kelvin such that Boltzmann's constant takes the exact value 1.3806505×10−23 J/K. The committee had hoped tha
ArXiv is a repository of electronic preprints approved for posting after moderation, but not full peer review. It consists of scientific papers in the fields of mathematics, astronomy, electrical engineering, computer science, quantitative biology, mathematical finance and economics, which can be accessed online. In many fields of mathematics and physics all scientific papers are self-archived on the arXiv repository. Begun on August 14, 1991, arXiv.org passed the half-million-article milestone on October 3, 2008, had hit a million by the end of 2014. By October 2016 the submission rate had grown to more than 10,000 per month. ArXiv was made possible by the compact TeX file format, which allowed scientific papers to be transmitted over the Internet and rendered client-side. Around 1990, Joanne Cohn began emailing physics preprints to colleagues as TeX files, but the number of papers being sent soon filled mailboxes to capacity. Paul Ginsparg recognized the need for central storage, in August 1991 he created a central repository mailbox stored at the Los Alamos National Laboratory which could be accessed from any computer.
Additional modes of access were soon added: FTP in 1991, Gopher in 1992, the World Wide Web in 1993. The term e-print was adopted to describe the articles, it began as a physics archive, called the LANL preprint archive, but soon expanded to include astronomy, computer science, quantitative biology and, most statistics. Its original domain name was xxx.lanl.gov. Due to LANL's lack of interest in the expanding technology, in 2001 Ginsparg changed institutions to Cornell University and changed the name of the repository to arXiv.org. It is now hosted principally with eight mirrors around the world, its existence was one of the precipitating factors that led to the current movement in scientific publishing known as open access. Mathematicians and scientists upload their papers to arXiv.org for worldwide access and sometimes for reviews before they are published in peer-reviewed journals. Ginsparg was awarded a MacArthur Fellowship in 2002 for his establishment of arXiv; the annual budget for arXiv is $826,000 for 2013 to 2017, funded jointly by Cornell University Library, the Simons Foundation and annual fee income from member institutions.
This model arose in 2010, when Cornell sought to broaden the financial funding of the project by asking institutions to make annual voluntary contributions based on the amount of download usage by each institution. Each member institution pledges a five-year funding commitment to support arXiv. Based on institutional usage ranking, the annual fees are set in four tiers from $1,000 to $4,400. Cornell's goal is to raise at least $504,000 per year through membership fees generated by 220 institutions. In September 2011, Cornell University Library took overall administrative and financial responsibility for arXiv's operation and development. Ginsparg was quoted in the Chronicle of Higher Education as saying it "was supposed to be a three-hour tour, not a life sentence". However, Ginsparg remains on the arXiv Scientific Advisory Board and on the arXiv Physics Advisory Committee. Although arXiv is not peer reviewed, a collection of moderators for each area review the submissions; the lists of moderators for many sections of arXiv are publicly available, but moderators for most of the physics sections remain unlisted.
Additionally, an "endorsement" system was introduced in 2004 as part of an effort to ensure content is relevant and of interest to current research in the specified disciplines. Under the system, for categories that use it, an author must be endorsed by an established arXiv author before being allowed to submit papers to those categories. Endorsers are not asked to review the paper for errors, but to check whether the paper is appropriate for the intended subject area. New authors from recognized academic institutions receive automatic endorsement, which in practice means that they do not need to deal with the endorsement system at all. However, the endorsement system has attracted criticism for restricting scientific inquiry. A majority of the e-prints are submitted to journals for publication, but some work, including some influential papers, remain purely as e-prints and are never published in a peer-reviewed journal. A well-known example of the latter is an outline of a proof of Thurston's geometrization conjecture, including the Poincaré conjecture as a particular case, uploaded by Grigori Perelman in November 2002.
Perelman appears content to forgo the traditional peer-reviewed journal process, stating: "If anybody is interested in my way of solving the problem, it's all there – let them go and read about it". Despite this non-traditional method of publication, other mathematicians recognized this work by offering the Fields Medal and Clay Mathematics Millennium Prizes to Perelman, both of which he refused. Papers can be submitted in any of several formats, including LaTeX, PDF printed from a word processor other than TeX or LaTeX; the submission is rejected by the arXiv software if generating the final PDF file fails, if any image file is too large, or if the total size of the submission is too large. ArXiv now allows one to store and modify an incomplete submission, only finalize the submission when ready; the time stamp on the article is set. The standard access route is through one of several mirrors. Sev
Boötes is a constellation in the northern sky, located between 0° and +60° declination, 13 and 16 hours of right ascension on the celestial sphere. The name comes from the Greek Βοώτης, Boōtēs, meaning “herdsman” or “plowman”. One of the 48 constellations described by the 2nd-century astronomer Ptolemy, Boötes is now one of the 88 modern constellations, it contains the fourth-brightest star in the orange giant Arcturus. Epsilon Bootis, or Izar, is a colourful multiple star popular with amateur astronomers. Boötes is home to many other bright stars, including eight above the fourth magnitude and an additional 21 above the fifth magnitude, making a total of 29 stars visible to the naked eye. In ancient Babylon, the stars of Boötes were known as SHU. PA, they were depicted as the god Enlil, the leader of the Babylonian pantheon and special patron of farmers. Boötes may have been represented by the foreleg constellation in ancient Egypt. According to this interpretation, the constellation depicts the shape of an animal foreleg.
The name Boötes was first used by Homer in his Odyssey as a celestial reference point for navigation, described as "late-setting" or "slow to set", translated as the "Plowman". Whom Boötes is supposed to represent in Greek mythology is not clear. According to one version, he was a son of Demeter, twin brother of Plutus, a plowman who drove the oxen in the constellation Ursa Major; this is corroborated by the constellation's name, which itself means "ox-driver" or "herdsman." The ancient Greeks saw. This influenced the name's etymology, derived from the Greek for "noisy" or "ox-driver". Another myth associated with Boötes relates that he invented the plow and was memorialized for his ingenuity as a constellation. Another myth associated with Boötes by Hyginus is that of Icarius, schooled as a grape farmer and winemaker by Dionysus. Icarius made wine so strong that those who drank it appeared poisoned, which caused shepherds to avenge their poisoned friends by killing Icarius. Maera, Icarius' dog, brought his daughter Erigone to her father's body, whereupon both she and the dog committed suicide.
Zeus chose to honor all three by placing them in the sky as constellations: Icarius as Boötes, Erigone as Virgo, Maera as Canis Major or Canis Minor. Following another reading, the constellation is identified with Arcas and referred to as Arcas and Arcturus, son of Zeus and Callisto. Arcas was brought up by his maternal grandfather Lycaon, to whom one day Zeus had a meal. To verify that the guest was the king of the gods, Lycaon killed his grandson and prepared a meal made from his flesh. Zeus noticed and became angry, transforming Lycaon into a wolf and giving life back to his son. In the meantime Callisto had been transformed into a she-bear by Zeus's wife Hera, angry at Zeus's infidelity; this is corroborated by the Greek name for Boötes, which means "Bear Watcher". Callisto, in the form of a bear was killed by her son, out hunting. Zeus rescued her, taking her into the sky where she became Ursa Major, "the Great Bear". Arcturus, the name of the constellation's brightest star, comes from the Greek word meaning "guardian of the bear".
Sometimes Arcturus is depicted as leading the hunting dogs of nearby Canes Venatici and driving the bears of Ursa Major and Ursa Minor. Several former constellations were formed from stars now included in Boötes. Quadrans Muralis, the Quadrant, was a constellation created near Beta Boötis from faint stars, it was designated in 1795 by Jérôme Lalande, an astronomer who used a quadrant to perform detailed astronometric measurements. Lalande worked with others to predict the 1758 return of Halley's Comet. Quadrans Muralis was formed from the stars of eastern Boötes, western Hercules, Draco, it was called Le Mural by Jean Fortin in his 1795 Atlas Céleste. The constellation was quite faint, with its brightest stars reaching the 5th magnitude. Mons Maenalus, representing the Maenalus mountains, was created by Johannes Hevelius in 1687 at the foot of the constellation's figure; the mountain was named for the son of Maenalus. The mountain, one of Diana's hunting grounds, was holy to Pan; the stars of Boötes were incorporated into many different Chinese constellations.
Arcturus was part of the most prominent of these, variously designated as the celestial king's throne or the Blue Dragon's horn. Arcturus was given such importance in Chinese celestial mythology because of its status marking the beginning of the lunar calendar, as well as its status as the brightest star in the northern night sky. Two constellations flanked Daijiao: Yousheti to Zuosheti to the left. Zuosheti was formed from modern Zeta, Pi Boötis, while Yousheti was formed from modern Eta and Upsilon Boötis. Dixi, the Emperor's ceremonial banquet mat, was north of Arcturus, consisting of the stars 12, 11, 9 Boötis. Another northern constellation was Qigong, the Seven Dukes, which straddled the Boötes-Hercules border, it included either Delta Boötis or Beta Boötis as its terminus. The other Chinese constellations made up of the stars of Boötes existed in the modern constellation's north. Tianqiang, the spear, was formed from Iota and Theta Boötis. There were two
In astronomy, luminosity is the total amount of energy emitted per unit of time by a star, galaxy, or other astronomical object. As a term for energy emitted per unit time, luminosity is synonymous with power. In SI units luminosity is measured in joules per second or watts. Values for luminosity are given in the terms of the luminosity of the Sun, L⊙. Luminosity can be given in terms of the astronomical magnitude system: the absolute bolometric magnitude of an object is a logarithmic measure of its total energy emission rate, while absolute magnitude is a logarithmic measure of the luminosity within some specific wavelength range or filter band. In contrast, the term brightness in astronomy is used to refer to an object's apparent brightness: that is, how bright an object appears to an observer. Apparent brightness depends on both the luminosity of the object and the distance between the object and observer, on any absorption of light along the path from object to observer. Apparent magnitude is a logarithmic measure of apparent brightness.
The distance determined by luminosity measures can be somewhat ambiguous, is thus sometimes called the luminosity distance. In astronomy, luminosity is the amount of electromagnetic energy; when not qualified, the term "luminosity" means bolometric luminosity, measured either in the SI units, watts, or in terms of solar luminosities. A bolometer is the instrument used to measure radiant energy over a wide band by absorption and measurement of heating. A star radiates neutrinos, which carry off some energy, contributing to the star's total luminosity; the IAU has defined a nominal solar luminosity of 3.828×1026 W to promote publication of consistent and comparable values in units of the solar luminosity. While bolometers do exist, they cannot be used to measure the apparent brightness of a star because they are insufficiently sensitive across the electromagnetic spectrum and because most wavelengths do not reach the surface of the Earth. In practice bolometric magnitudes are measured by taking measurements at certain wavelengths and constructing a model of the total spectrum, most to match those measurements.
In some cases, the process of estimation is extreme, with luminosities being calculated when less than 1% of the energy output is observed, for example with a hot Wolf-Rayet star observed only in the infra-red. Bolometric luminosities can be calculated using a bolometric correction to a luminosity in a particular passband; the term luminosity is used in relation to particular passbands such as a visual luminosity of K-band luminosity. These are not luminosities in the strict sense of an absolute measure of radiated power, but absolute magnitudes defined for a given filter in a photometric system. Several different photometric systems exist; some such as the UBV or Johnson system are defined against photometric standard stars, while others such as the AB system are defined in terms of a spectral flux density. A star's luminosity can be determined from two stellar characteristics: size and effective temperature; the former is represented in terms of solar radii, R⊙, while the latter is represented in kelvins, but in most cases neither can be measured directly.
To determine a star's radius, two other metrics are needed: the star's angular diameter and its distance from Earth. Both can be measured with great accuracy in certain cases, with cool supergiants having large angular diameters, some cool evolved stars having masers in their atmospheres that can be used to measure the parallax using VLBI. However, for most stars the angular diameter or parallax, or both, are far below our ability to measure with any certainty. Since the effective temperature is a number that represents the temperature of a black body that would reproduce the luminosity, it cannot be measured directly, but it can be estimated from the spectrum. An alternative way to measure stellar luminosity is to measure the star's apparent brightness and distance. A third component needed to derive the luminosity is the degree of interstellar extinction, present, a condition that arises because of gas and dust present in the interstellar medium, the Earth's atmosphere, circumstellar matter.
One of astronomy's central challenges in determining a star's luminosity is to derive accurate measurements for each of these components, without which an accurate luminosity figure remains elusive. Extinction can only be measured directly if the actual and observed luminosities are both known, but it can be estimated from the observed colour of a star, using models of the expected level of reddening from the interstellar medium. In the current system of stellar classification, stars are grouped according to temperature, with the massive young and energetic Class O stars boasting temperatures in excess of 30,000 K while the less massive older Class M stars exhibit temperatures less than 3,500 K; because luminosity is proportional to temperature to the fourth power, the large variation in stellar temperatures produces an vaster variation in stellar luminosity. Because the luminosity depends on a high power of the stellar mass, high mass luminous stars have much shorter lifetimes; the most luminous stars are always young stars, no more than a few million years for the most extreme.
In the Hertzsprung–Russell diagram, the x-axis represents temperature or spectral type while the y-axis represents luminosity or magnitude. The vast majority of stars are found along the main sequence with blue Class O stars found at the top left of the chart while red Class M stars fall to the bottom right. Certain stars like Deneb and Betelgeuse are
A giant star is a star with larger radius and luminosity than a main-sequence star of the same surface temperature. They lie above the main sequence on the Hertzsprung–Russell diagram and correspond to luminosity classes II and III; the terms giant and dwarf were coined for stars of quite different luminosity despite similar temperature or spectral type by Ejnar Hertzsprung about 1905. Giant stars have radii up to a few hundred times the Sun and luminosities between 10 and a few thousand times that of the Sun. Stars still more luminous than giants are referred to as hypergiants. A hot, luminous main-sequence star may be referred to as a giant, but any main-sequence star is properly called a dwarf no matter how large and luminous it is. A star becomes a giant after all the hydrogen available for fusion at its core has been depleted and, as a result, leaves the main sequence; the behaviour of a post-main-sequence star depends on its mass. For a star with a mass above about 0.25 solar masses, once the core is depleted of hydrogen it contracts and heats up so that hydrogen starts to fuse in a shell around the core.
The portion of the star outside the shell expands and cools, but with only a small increase in luminosity, the star becomes a subgiant. The inert helium core continues to grow and increase temperature as it accretes helium from the shell, but in stars up to about 10-12 M☉ it does not become hot enough to start helium burning. Instead, after just a few million years the core reaches the Schönberg–Chandrasekhar limit collapses, may become degenerate; this causes the outer layers to expand further and generates a strong convective zone that brings heavy elements to the surface in a process called the first dredge-up. This strong convection increases the transport of energy to the surface, the luminosity increases and the star moves onto the red-giant branch where it will stably burn hydrogen in a shell for a substantial fraction of its entire life; the core continues to gain mass and increase in temperature, whereas there is some mass loss in the outer layers. § 5.9. If the star's mass, when on the main sequence, was below 0.4 M☉, it will never reach the central temperatures necessary to fuse helium.
P. 169. It will therefore remain a hydrogen-fusing red giant until it runs out of hydrogen, at which point it will become a helium white dwarf. § 4.1, 6.1. According to stellar evolution theory, no star of such low mass can have evolved to that stage within the age of the Universe. In stars above about 0.4 M☉ the core temperature reaches 108 K and helium will begin to fuse to carbon and oxygen in the core by the triple-alpha process.§ 5.9, chapter 6. When the core is degenerate helium fusion begins explosively, but most of the energy goes into lifting the degeneracy and the core becomes convective; the energy generated by helium fusion reduces the pressure in the surrounding hydrogen-burning shell, which reduces its energy-generation rate. The overall luminosity of the star decreases, its outer envelope contracts again, the star moves from the red-giant branch to the horizontal branch. Chapter 6; when the core helium is exhausted, a star with up to about 8 M☉ has a carbon–oxygen core that becomes degenerate and starts helium burning in a shell.
As with the earlier collapse of the helium core, this starts convection in the outer layers, triggers a second dredge-up, causes a dramatic increase in size and luminosity. This is the asymptotic giant branch analogous to the red-giant branch but more luminous, with a hydrogen-burning shell contributing most of the energy. Stars only remain on the AGB for around a million years, becoming unstable until they exhaust their fuel, go through a planetary nebula phase, become a carbon–oxygen white dwarf. § 7.1–7.4. Main-sequence stars with masses above about 12 M☉ are very luminous and they move horizontally across the HR diagram when they leave the main sequence becoming blue giants before they expand further into blue supergiants, they start core-helium burning before the core becomes degenerate and develop smoothly into red supergiants without a strong increase in luminosity. At this stage they have comparable luminosities to bright AGB stars although they have much higher masses, but will further increase in luminosity as they burn heavier elements and become a supernova.
Stars in the 8-12 M☉ range have somewhat intermediate properties and have been called super-AGB stars. They follow the tracks of lighter stars through RGB, HB, AGB phases, but are massive enough to initiate core carbon burning and some neon burning, they form oxygen–magnesium–neon cores, which may collapse in an electron-capture supernova, or they may leave behind an oxygen–neon white dwarf. O class main sequence stars are highly luminous; the giant phase for such stars is a brief phase of increased size and luminosity before developing a supergiant spectral luminosity class. Type O giants may be more than a hundred thousand times as luminous as the sun, brighter than many supergiants. Classification is complex and difficult with small differences between luminosity classes and a continuous range of intermediate forms; the most massive stars develop giant or supergiant spectral features while still burning hydrogen in their cores, due to mixing of heavy elements to the surface and high luminosity which produces a powerful stellar wind and causes the star's atmosphere to expand.
A star whose initial mass is less than 0.25 M☉ will not become a giant star at all. For most of th
The effective temperature of a body such as a star or planet is the temperature of a black body that would emit the same total amount of electromagnetic radiation. Effective temperature is used as an estimate of a body's surface temperature when the body's emissivity curve is not known; when the star's or planet's net emissivity in the relevant wavelength band is less than unity, the actual temperature of the body will be higher than the effective temperature. The net emissivity may be low due to surface or atmospheric properties, including greenhouse effect; the effective temperature of a star is the temperature of a black body with the same luminosity per surface area as the star and is defined according to the Stefan–Boltzmann law FBol = σTeff4. Notice that the total luminosity of a star is L = 4πR2σTeff4, where R is the stellar radius; the definition of the stellar radius is not straightforward. More rigorously the effective temperature corresponds to the temperature at the radius, defined by a certain value of the Rosseland optical depth within the stellar atmosphere.
The effective temperature and the bolometric luminosity are the two fundamental physical parameters needed to place a star on the Hertzsprung–Russell diagram. Both effective temperature and bolometric luminosity depend on the chemical composition of a star; the effective temperature of our Sun is around 5780 kelvins. Stars have a decreasing temperature gradient; the "core temperature" of the Sun—the temperature at the centre of the Sun where nuclear reactions take place—is estimated to be 15,000,000 K. The color index of a star indicates its temperature from the cool—by stellar standards—red M stars that radiate in the infrared to the hot blue O stars that radiate in the ultraviolet; the effective temperature of a star indicates the amount of heat that the star radiates per unit of surface area. From the warmest surfaces to the coolest is the sequence of stellar classifications known as O, B, A, F, G, K, M. A red star could be a tiny red dwarf, a star of feeble energy production and a small surface or a bloated giant or supergiant star such as Antares or Betelgeuse, either of which generates far greater energy but passes it through a surface so large that the star radiates little per unit of surface area.
A star near the middle of the spectrum, such as the modest Sun or the giant Capella radiates more energy per unit of surface area than the feeble red dwarf stars or the bloated supergiants, but much less than such a white or blue star as Vega or Rigel. To find the effective temperature of a planet, it can be calculated by equating the power received by the planet to the known power emitted by a blackbody of temperature T. Take the case of a planet at a distance D from the star, of luminosity L. Assuming the star radiates isotropically and that the planet is a long way from the star, the power absorbed by the planet is given by treating the planet as a disc of radius r, which intercepts some of the power, spread over the surface of a sphere of radius D; the calculation assumes the planet reflects some of the incoming radiation by incorporating a parameter called the albedo. An albedo of 1 means that all the radiation is reflected, an albedo of 0 means all of it is absorbed; the expression for absorbed power is then: P a b s = L r 2 4 D 2 The next assumption we can make is that the entire planet is at the same temperature T, that the planet radiates as a blackbody.
The Stefan–Boltzmann law gives an expression for the power radiated by the planet: P r a d = 4 π r 2 σ T 4 Equating these two expressions and rearranging gives an expression for the effective temperature: T = L 16 π σ D 2 4 Note that the planet's radius has cancelled out of the final expression. The effective temperature for Jupiter from this calculation is 88 K and 51 Pegasi b is 1,258 K. A better estimate of effective temperature for some planets, such as Jupiter, would need to include the internal heating as a power input; the actual temperature depends on atmosphere effects. The actual temperature from spectroscopic analysis for HD 209458 b is 1,130 K, but the effective temperature is 1,359 K; the internal heating within Jupiter raises the effective temperature to about 152 K. The surface temperature of a planet can be estimated by modifying the effective-temperature calculation to account for emissivity and temperature variation; the area of the planet that absorbs the power from the star is Aabs, some fraction of the total surface area Atotal = 4πr2, where r is the radius of the planet.
This area intercepts some of the power, spread over the surface of a sphere of radius D. We allow the planet to reflect some of the incoming radiation by incorporating a parameter a called the albedo. An albedo of 1 means that all the radiation is reflected, an albedo
SIMBAD is an astronomical database of objects beyond the Solar System. It is maintained by the Centre de données astronomiques de France. SIMBAD was created by merging the Catalog of Stellar Identifications and the Bibliographic Star Index as they existed at the Meudon Computer Centre until 1979, expanded by additional source data from other catalogues and the academic literature; the first on-line interactive version, known as Version 2, was made available in 1981. Version 3, developed in the C language and running on UNIX stations at the Strasbourg Observatory, was released in 1990. Fall of 2006 saw the release of Version 4 of the database, now stored in PostgreSQL, the supporting software, now written in Java; as of 10 February 2017, SIMBAD contains information for 9,099,070 objects under 24,529,080 different names, with 327,634 bibliographical references and 15,511,733 bibliographic citations. The minor planet 4692 SIMBAD was named in its honour. Planetary Data System – NASA's database of information on SSSB, maintained by JPL and Caltech.
NASA/IPAC Extragalactic Database – a database of information on objects outside the Milky Way maintained by JPL. NASA Exoplanet Archive – an online astronomical exoplanet catalog and data service Bibcode SIMBAD, Strasbourg SIMBAD, Harvard