Right ascension is the angular distance of a particular point measured eastward along the celestial equator from the Sun at the March equinox to the point above the earth in question. When paired with declination, these astronomical coordinates specify the direction of a point on the celestial sphere in the equatorial coordinate system. An old term, right ascension refers to the ascension, or the point on the celestial equator that rises with any celestial object as seen from Earth's equator, where the celestial equator intersects the horizon at a right angle, it contrasts with oblique ascension, the point on the celestial equator that rises with any celestial object as seen from most latitudes on Earth, where the celestial equator intersects the horizon at an oblique angle. Right ascension is the celestial equivalent of terrestrial longitude. Both right ascension and longitude measure an angle from a primary direction on an equator. Right ascension is measured from the Sun at the March equinox i.e. the First Point of Aries, the place on the celestial sphere where the Sun crosses the celestial equator from south to north at the March equinox and is located in the constellation Pisces.
Right ascension is measured continuously in a full circle from that alignment of Earth and Sun in space, that equinox, the measurement increasing towards the east. As seen from Earth, objects noted to have 12h RA are longest visible at the March equinox. On those dates at midnight, such objects will reach their highest point. How high depends on their declination. Any units of angular measure could have been chosen for right ascension, but it is customarily measured in hours and seconds, with 24h being equivalent to a full circle. Astronomers have chosen this unit to measure right ascension because they measure a star's location by timing its passage through the highest point in the sky as the Earth rotates; the line which passes through the highest point in the sky, called the meridian, is the projection of a longitude line onto the celestial sphere. Since a complete circle contains 24h of right ascension or 360°, 1/24 of a circle is measured as 1h of right ascension, or 15°. A full circle, measured in right-ascension units, contains 24 × 60 × 60 = 86400s, or 24 × 60 = 1440m, or 24h.
Because right ascensions are measured in hours, they can be used to time the positions of objects in the sky. For example, if a star with RA = 1h 30m 00s is at its meridian a star with RA = 20h 00m 00s will be on the/at its meridian 18.5 sidereal hours later. Sidereal hour angle, used in celestial navigation, is similar to right ascension, but increases westward rather than eastward. Measured in degrees, it is the complement of right ascension with respect to 24h, it is important not to confuse sidereal hour angle with the astronomical concept of hour angle, which measures angular distance of an object westward from the local meridian. The Earth's axis rotates westward about the poles of the ecliptic, completing one cycle in about 26,000 years; this movement, known as precession, causes the coordinates of stationary celestial objects to change continuously, if rather slowly. Therefore, equatorial coordinates are inherently relative to the year of their observation, astronomers specify them with reference to a particular year, known as an epoch.
Coordinates from different epochs must be mathematically rotated to match each other, or to match a standard epoch. Right ascension for "fixed stars" near the ecliptic and equator increases by about 3.05 seconds per year on average, or 5.1 minutes per century, but for fixed stars further from the ecliptic the rate of change can be anything from negative infinity to positive infinity. The right ascension of Polaris is increasing quickly; the North Ecliptic Pole in Draco and the South Ecliptic Pole in Dorado are always at right ascension 18h and 6h respectively. The used standard epoch is J2000.0, January 1, 2000 at 12:00 TT. The prefix "J" indicates. Prior to J2000.0, astronomers used the successive Besselian epochs B1875.0, B1900.0, B1950.0. The concept of right ascension has been known at least as far back as Hipparchus who measured stars in equatorial coordinates in the 2nd century BC, but Hipparchus and his successors made their star catalogs in ecliptic coordinates, the use of RA was limited to special cases.
With the invention of the telescope, it became possible for astronomers to observe celestial objects in greater detail, provided that the telescope could be kept pointed at the object for a period of time. The easiest way to do, to use an equatorial mount, which allows the telescope to be aligned with one of its two pivots parallel to the Earth's axis. A motorized clock drive is used with an equatorial mount to cancel out the Earth's rotation; as the equatorial mount became adopted for observation, the equatorial coordinate system, which includes right ascension, was adopted at the same time for simplicity. Equatorial mounts could be pointed at objects with known right ascension and declination by the use of setting circles; the first star catalog to use right ascen
The parsec is a unit of length used to measure large distances to astronomical objects outside the Solar System. A parsec is defined as the distance at which one astronomical unit subtends an angle of one arcsecond, which corresponds to 648000/π astronomical units. One parsec is equal to 31 trillion kilometres or 19 trillion miles; the nearest star, Proxima Centauri, is about 1.3 parsecs from the Sun. Most of the stars visible to the unaided eye in the night sky are within 500 parsecs of the Sun; the parsec unit was first suggested in 1913 by the British astronomer Herbert Hall Turner. Named as a portmanteau of the parallax of one arcsecond, it was defined to make calculations of astronomical distances from only their raw observational data quick and easy for astronomers. For this reason, it is the unit preferred in astronomy and astrophysics, though the light-year remains prominent in popular science texts and common usage. Although parsecs are used for the shorter distances within the Milky Way, multiples of parsecs are required for the larger scales in the universe, including kiloparsecs for the more distant objects within and around the Milky Way, megaparsecs for mid-distance galaxies, gigaparsecs for many quasars and the most distant galaxies.
In August 2015, the IAU passed Resolution B2, which, as part of the definition of a standardized absolute and apparent bolometric magnitude scale, mentioned an existing explicit definition of the parsec as 648000/π astronomical units, or 3.08567758149137×1016 metres. This corresponds to the small-angle definition of the parsec found in many contemporary astronomical references; the parsec is defined as being equal to the length of the longer leg of an elongated imaginary right triangle in space. The two dimensions on which this triangle is based are its shorter leg, of length one astronomical unit, the subtended angle of the vertex opposite that leg, measuring one arc second. Applying the rules of trigonometry to these two values, the unit length of the other leg of the triangle can be derived. One of the oldest methods used by astronomers to calculate the distance to a star is to record the difference in angle between two measurements of the position of the star in the sky; the first measurement is taken from the Earth on one side of the Sun, the second is taken half a year when the Earth is on the opposite side of the Sun.
The distance between the two positions of the Earth when the two measurements were taken is twice the distance between the Earth and the Sun. The difference in angle between the two measurements is twice the parallax angle, formed by lines from the Sun and Earth to the star at the distant vertex; the distance to the star could be calculated using trigonometry. The first successful published direct measurements of an object at interstellar distances were undertaken by German astronomer Friedrich Wilhelm Bessel in 1838, who used this approach to calculate the 3.5-parsec distance of 61 Cygni. The parallax of a star is defined as half of the angular distance that a star appears to move relative to the celestial sphere as Earth orbits the Sun. Equivalently, it is the subtended angle, from that star's perspective, of the semimajor axis of the Earth's orbit; the star, the Sun and the Earth form the corners of an imaginary right triangle in space: the right angle is the corner at the Sun, the corner at the star is the parallax angle.
The length of the opposite side to the parallax angle is the distance from the Earth to the Sun (defined as one astronomical unit, the length of the adjacent side gives the distance from the sun to the star. Therefore, given a measurement of the parallax angle, along with the rules of trigonometry, the distance from the Sun to the star can be found. A parsec is defined as the length of the side adjacent to the vertex occupied by a star whose parallax angle is one arcsecond; the use of the parsec as a unit of distance follows from Bessel's method, because the distance in parsecs can be computed as the reciprocal of the parallax angle in arcseconds. No trigonometric functions are required in this relationship because the small angles involved mean that the approximate solution of the skinny triangle can be applied. Though it may have been used before, the term parsec was first mentioned in an astronomical publication in 1913. Astronomer Royal Frank Watson Dyson expressed his concern for the need of a name for that unit of distance.
He proposed the name astron, but mentioned that Carl Charlier had suggested siriometer and Herbert Hall Turner had proposed parsec. It was Turner's proposal. In the diagram above, S represents the Sun, E the Earth at one point in its orbit, thus the distance ES is one astronomical unit. The angle SDE is one arcsecond so by definition D is a point in space at a distance of one parsec from the Sun. Through trigonometry, the distance SD is calculated as follows: S D = E S tan 1 ″ S D ≈ E S 1 ″ = 1 au 1 60 × 60 × π
The radial velocity of an object with respect to a given point is the rate of change of the distance between the object and the point. That is, the radial velocity is the component of the object's velocity that points in the direction of the radius connecting the object and the point. In astronomy, the point is taken to be the observer on Earth, so the radial velocity denotes the speed with which the object moves away from or approaches the Earth. In astronomy, radial velocity is measured to the first order of approximation by Doppler spectroscopy; the quantity obtained by this method may be called the barycentric radial-velocity measure or spectroscopic radial velocity. However, due to relativistic and cosmological effects over the great distances that light travels to reach the observer from an astronomical object, this measure cannot be transformed to a geometric radial velocity without additional assumptions about the object and the space between it and the observer. By contrast, astrometric radial velocity is determined by astrometric observations.
Light from an object with a substantial relative radial velocity at emission will be subject to the Doppler effect, so the frequency of the light decreases for objects that were receding and increases for objects that were approaching. The radial velocity of a star or other luminous distant objects can be measured by taking a high-resolution spectrum and comparing the measured wavelengths of known spectral lines to wavelengths from laboratory measurements. A positive radial velocity indicates the distance between the objects was increasing. In many binary stars, the orbital motion causes radial velocity variations of several kilometers per second; as the spectra of these stars vary due to the Doppler effect, they are called spectroscopic binaries. Radial velocity can be used to estimate the ratio of the masses of the stars, some orbital elements, such as eccentricity and semimajor axis; the same method has been used to detect planets around stars, in the way that the movement's measurement determines the planet's orbital period, while the resulting radial-velocity amplitude allows the calculation of the lower bound on a planet's mass using the binary mass function.
Radial velocity methods alone may only reveal a lower bound, since a large planet orbiting at a high angle to the line of sight will perturb its star radially as much as a much smaller planet with an orbital plane on the line of sight. It has been suggested that planets with high eccentricities calculated by this method may in fact be two-planet systems of circular or near-circular resonant orbit; the radial velocity method to detect exoplanets is based on the detection of variations in the velocity of the central star, due to the changing direction of the gravitational pull from an exoplanet as it orbits the star. When the star moves towards us, its spectrum is blueshifted, while it is redshifted when it moves away from us. By looking at the spectrum of a star—and so, measuring its velocity—it can be determined if it moves periodically due to the influence of an exoplanet companion. From the instrumental perspective, velocities are measured relative to the telescope's motion. So an important first step of the data reduction is to remove the contributions of the Earth's elliptic motion around the sun at ± 30 km/s, a monthly rotation of ± 13 m/s of the Earth around the center of gravity of the Earth-Moon system, the daily rotation of the telescope with the Earth crust around the Earth axis, up to ±460 m/s at the equator and proportional to the cosine of the telescope's geographic latitude, small contributions from the Earth polar motion at the level of mm/s, contributions of 230 km/s from the motion around the Galactic center and associated proper motions.
In the case of spectroscopic measurements corrections of the order of ±20 cm/s with respect to aberration. Proper motion Peculiar velocity Relative velocity Space velocity The Radial Velocity Equation in the Search for Exoplanets
A-type main-sequence star
An A-type main-sequence star or A dwarf star is a main-sequence star of spectral type A and luminosity class V. These stars have spectra, they have masses from 1.4 to 2.1 times the mass of the Sun and surface temperatures between 7600 and 10,000 K. Bright and nearby examples are Altair, Sirius A, Vega. A-type stars don't have a convective zone and thus aren't expected to harbor a magnetic dynamo; as a consequence, because they don't have strong stellar winds they lack a means to generate X-ray emission. The revised Yerkes Atlas system listed a dense grid of A-type dwarf spectral standard stars, but not all of these have survived to this day as standards; the "anchor points" and "dagger standards" of the MK spectral classification system among the A-type main-sequence dwarf stars, i.e. those standard stars that have remain unchanged over years and can be considered to define the system, are Vega, Gamma Ursae Majoris, Fomalhaut. The seminal review of MK classification by Morgan & Keenan didn't provide any dagger standards between types A3 V and F2 V. HD 23886 was suggested as an A5 V standard in 1978.
Richard Gray & Robert Garrison provided the most recent contributions to the A dwarf spectral sequence in a pair of papers in 1987 and 1989. They list an assortment of fast- and slow-rotating A-type dwarf spectral standards, including HD 45320, HD 88955, 2 Hydri, 21 Leonis Minoris, 44 Ceti. Besides the MK standards provided in Morgan's papers and the Gray & Garrison papers, one occasionally sees Delta Leonis listed as a standard. There are no published A6 A8 V standard stars. A-type stars are young and many emit infrared radiation beyond what would be expected from the star alone; this IR excess is attributable to dust emission from a debris disk. Surveys indicate massive planets form around A-type stars although these planets are difficult to detect using the Doppler spectroscopy method; this is because A-type stars rotate quickly, which makes it difficult to measure the small Doppler shifts induced by orbiting planets since the spectral lines are broad. However, this type of massive star evolves into a cooler red giant which rotates more and thus can be measured using the radial velocity method.
As of early 2011 about 30 Jupiter class planets have been found around evolved K-giant stars including Pollux, Gamma Cephei and Iota Draconis. Doppler surveys around a wide variety of stars indicate about 1 in 6 stars having twice the mass of the Sun are orbited by one or more Jupiter-sized planets, compared to about 1 in 16 for Sun-like stars. A-type star systems known to feature planets include Fomalhaut, HD 15082, Beta Pictoris and HD 95086 b. Star count, survey of stars B-type main-sequence star
Auriga is one of the 88 modern constellations. Located north of the celestial equator, its name is the Latin word for “the charioteer”, associating it with various mythological beings, including Erichthonius and Myrtilus. Auriga is most prominent during winter evenings in the northern Hemisphere, along with the five other constellations that have stars in the Winter Hexagon asterism; because of its northern declination, Auriga is only visible in its entirety as far as 34° south. A large constellation, with an area of 657 square degrees, it is half the size of the largest constellation, Hydra, its brightest star, Capella, is an unusual multiple star system among the brightest stars in the night sky. Beta Aurigae is an interesting variable star in the constellation; because of its position near the winter Milky Way, Auriga has many bright open clusters in its borders, including M36, M37, M38, popular targets for amateur astronomers. In addition, it has one prominent nebula, the Flaming Star Nebula, associated with the variable star AE Aurigae.
In Chinese mythology, Auriga's stars were incorporated into several constellations, including the celestial emperors' chariots, made up of the modern constellation's brightest stars. Auriga is home to the radiant for the Aurigids, Zeta Aurigids, Delta Aurigids, the hypothesized Iota Aurigids; the first record of Auriga's stars was in Mesopotamia as a constellation called GAM, representing a scimitar or crook. However, this may have represented just the modern constellation as a whole. GAM in the MUL. APIN; the crook of Auriga shepherd. It was formed from most of the stars of the modern constellation. Bedouin astronomers created constellations that were groups of animals, where each star represented one animal; the stars of Auriga comprised a herd of goats, an association present in Greek mythology. The association with goats carried into the Greek astronomical tradition, though it became associated with a charioteer along with the shepherd. In Greek mythology, Auriga is identified as the mythological Greek hero Erichthonius of Athens, the chthonic son of Hephaestus, raised by the goddess Athena.
Erichthonius was credited to be the inventor of the quadriga, the four-horse chariot, which he used in the battle against the usurper Amphictyon, the event that made Erichthonius the king of Athens. His chariot was created in the image of the Sun's chariot, the reason Zeus placed him in the heavens; the Athenian hero dedicated himself to Athena and, soon after, Zeus raised him into the night sky in honor of his ingenuity and heroic deeds. Auriga, however, is sometimes described as Myrtilus, Hermes's son and the charioteer of Oenomaus; the association of Auriga and Myrtilus is supported by depictions of the constellation, which show a chariot. Myrtilus's chariot was destroyed in a race intended for suitors to win the heart of Oenomaus's daughter Hippodamia. Myrtilus earned his position in the sky when Hippodamia's successful suitor, killed him, despite his complicity in helping Pelops win her hand. After his death, Myrtilus's father Hermes placed him in the sky, yet another mythological association of Auriga is Theseus's son Hippolytus.
He was ejected from Athens after he refused the romantic advances of his stepmother Phaedra, who committed suicide as a result. He was revived by Asclepius. Regardless of Auriga's specific representation, it is that the constellation was created by the ancient Greeks to commemorate the importance of the chariot in their society. An incidental appearance of Auriga in Greek mythology is as the limbs of Medea's brother. In the myth of Jason and the Argonauts, as they journeyed home, Medea killed her brother and dismembered him, flinging the parts of his body into the sea, represented by the Milky Way; each individual star represents a different limb. Capella is associated with the mythological she-goat Amalthea, it forms an asterism with the stars Epsilon Aurigae, Zeta Aurigae, Eta Aurigae, the latter two of which are known as the Haedi. Though most associated with Amalthea, Capella has sometimes been associated with Amalthea's owner, a nymph; the myth of the nymph says that the goat's hideous appearance, resembling a Gorgon, was responsible for the Titans' defeat, because Zeus skinned the goat and wore it as his aegis.
The asterism containing the three goats had been a separate constellation. Before that, Capella was sometimes seen as its own constellation—by Pliny the Elder and Manilius—called Capra, Caper, or Hircus, all of which relate to its status as the "goat star". Zeta Aurigae and Eta Aurigae were first called the "Kids" by Cleostratus, an ancient Greek astronomer. Traditionally, illustrations of Auriga represent it as its driver; the charioteer has two kids under his left arm. However, depictions of Auriga have been inconsistent over the years; the reins in his right hand have been drawn as a whip, though Capella is always over his left shoulder and the Kids under his left arm. The 1488 atlas Hyginus deviated from this typical depiction by showing a four-wheeled cart driven by Auriga
A star is type of astronomical object consisting of a luminous spheroid of plasma held together by its own gravity. The nearest star to Earth is the Sun. Many other stars are visible to the naked eye from Earth during the night, appearing as a multitude of fixed luminous points in the sky due to their immense distance from Earth; the most prominent stars were grouped into constellations and asterisms, the brightest of which gained proper names. Astronomers have assembled star catalogues that identify the known stars and provide standardized stellar designations. However, most of the estimated 300 sextillion stars in the Universe are invisible to the naked eye from Earth, including all stars outside our galaxy, the Milky Way. For at least a portion of its life, a star shines due to thermonuclear fusion of hydrogen into helium in its core, releasing energy that traverses the star's interior and radiates into outer space. All occurring elements heavier than helium are created by stellar nucleosynthesis during the star's lifetime, for some stars by supernova nucleosynthesis when it explodes.
Near the end of its life, a star can contain degenerate matter. Astronomers can determine the mass, age and many other properties of a star by observing its motion through space, its luminosity, spectrum respectively; the total mass of a star is the main factor. Other characteristics of a star, including diameter and temperature, change over its life, while the star's environment affects its rotation and movement. A plot of the temperature of many stars against their luminosities produces a plot known as a Hertzsprung–Russell diagram. Plotting a particular star on that diagram allows the age and evolutionary state of that star to be determined. A star's life begins with the gravitational collapse of a gaseous nebula of material composed of hydrogen, along with helium and trace amounts of heavier elements; when the stellar core is sufficiently dense, hydrogen becomes converted into helium through nuclear fusion, releasing energy in the process. The remainder of the star's interior carries energy away from the core through a combination of radiative and convective heat transfer processes.
The star's internal pressure prevents it from collapsing further under its own gravity. A star with mass greater than 0.4 times the Sun's will expand to become a red giant when the hydrogen fuel in its core is exhausted. In some cases, it will fuse heavier elements in shells around the core; as the star expands it throws a part of its mass, enriched with those heavier elements, into the interstellar environment, to be recycled as new stars. Meanwhile, the core becomes a stellar remnant: a white dwarf, a neutron star, or if it is sufficiently massive a black hole. Binary and multi-star systems consist of two or more stars that are gravitationally bound and move around each other in stable orbits; when two such stars have a close orbit, their gravitational interaction can have a significant impact on their evolution. Stars can form part of a much larger gravitationally bound structure, such as a star cluster or a galaxy. Stars have been important to civilizations throughout the world, they have used for celestial navigation and orientation.
Many ancient astronomers believed that stars were permanently affixed to a heavenly sphere and that they were immutable. By convention, astronomers grouped stars into constellations and used them to track the motions of the planets and the inferred position of the Sun; the motion of the Sun against the background stars was used to create calendars, which could be used to regulate agricultural practices. The Gregorian calendar used nearly everywhere in the world, is a solar calendar based on the angle of the Earth's rotational axis relative to its local star, the Sun; the oldest dated star chart was the result of ancient Egyptian astronomy in 1534 BC. The earliest known star catalogues were compiled by the ancient Babylonian astronomers of Mesopotamia in the late 2nd millennium BC, during the Kassite Period; the first star catalogue in Greek astronomy was created by Aristillus in 300 BC, with the help of Timocharis. The star catalog of Hipparchus included 1020 stars, was used to assemble Ptolemy's star catalogue.
Hipparchus is known for the discovery of the first recorded nova. Many of the constellations and star names in use today derive from Greek astronomy. In spite of the apparent immutability of the heavens, Chinese astronomers were aware that new stars could appear. In 185 AD, they were the first to observe and write about a supernova, now known as the SN 185; the brightest stellar event in recorded history was the SN 1006 supernova, observed in 1006 and written about by the Egyptian astronomer Ali ibn Ridwan and several Chinese astronomers. The SN 1054 supernova, which gave birth to the Crab Nebula, was observed by Chinese and Islamic astronomers. Medieval Islamic astronomers gave Arabic names to many stars that are still used today and they invented numerous astronomical instruments that could compute the positions of the stars, they built the first large observatory research institutes for the purpose of producing Zij star catalogues. Among these, the Book of Fixed Stars was written by the Persian astronomer Abd al-Rahman al-Sufi, who observed a number of stars, star clusters and galaxies.
According to A. Zahoor, in the 11th century, the Persian polymath scholar Abu Rayhan Biruni described the Milky
Hipparcos was a scientific satellite of the European Space Agency, launched in 1989 and operated until 1993. It was the first space experiment devoted to precision astrometry, the accurate measurement of the positions of celestial objects on the sky; this permitted the accurate determination of proper motions and parallaxes of stars, allowing a determination of their distance and tangential velocity. When combined with radial velocity measurements from spectroscopy, this pinpointed all six quantities needed to determine the motion of stars; the resulting Hipparcos Catalogue, a high-precision catalogue of more than 118,200 stars, was published in 1997. The lower-precision Tycho Catalogue of more than a million stars was published at the same time, while the enhanced Tycho-2 Catalogue of 2.5 million stars was published in 2000. Hipparcos' follow-up mission, was launched in 2013; the word "Hipparcos" is an acronym for HIgh Precision PARallax COllecting Satellite and a reference to the ancient Greek astronomer Hipparchus of Nicaea, noted for applications of trigonometry to astronomy and his discovery of the precession of the equinoxes.
By the second half of the 20th century, the accurate measurement of star positions from the ground was running into insurmountable barriers to improvements in accuracy for large-angle measurements and systematic terms. Problems were dominated by the effects of the Earth's atmosphere, but were compounded by complex optical terms and gravitational instrument flexures, the absence of all-sky visibility. A formal proposal to make these exacting observations from space was first put forward in 1967. Although proposed to the French space agency CNES, it was considered too complex and expensive for a single national programme, its acceptance within the European Space Agency's scientific programme, in 1980, was the result of a lengthy process of study and lobbying. The underlying scientific motivation was to determine the physical properties of the stars through the measurement of their distances and space motions, thus to place theoretical studies of stellar structure and evolution, studies of galactic structure and kinematics, on a more secure empirical basis.
Observationally, the objective was to provide the positions and annual proper motions for some 100,000 stars with an unprecedented accuracy of 0.002 arcseconds, a target in practice surpassed by a factor of two. The name of the space telescope, "Hipparcos" was an acronym for High Precision Parallax Collecting Satellite, it reflected the name of the ancient Greek astronomer Hipparchus, considered the founder of trigonometry and the discoverer of the precession of the equinoxes; the spacecraft carried a single all-reflective, eccentric Schmidt telescope, with an aperture of 29 cm. A special beam-combining mirror superimposed two fields of view, 58 degrees apart, into the common focal plane; this complex mirror consisted of two mirrors tilted in opposite directions, each occupying half of the rectangular entrance pupil, providing an unvignetted field of view of about 1°×1°. The telescope used a system of grids, at the focal surface, composed of 2688 alternate opaque and transparent bands, with a period of 1.208 arc-sec.
Behind this grid system, an image dissector tube with a sensitive field of view of about 38-arc-sec diameter converted the modulated light into a sequence of photon counts from which the phase of the entire pulse train from a star could be derived. The apparent angle between two stars in the combined fields of view, modulo the grid period, was obtained from the phase difference of the two star pulse trains. Targeting the observation of some 100,000 stars, with an astrometric accuracy of about 0.002 arc-sec, the final Hipparcos Catalogue comprised nearly 120,000 stars with a median accuracy of better than 0.001 arc-sec. An additional photomultiplier system viewed a beam splitter in the optical path and was used as a star mapper, its purpose was to monitor and determine the satellite attitude, in the process, to gather photometric and astrometric data of all stars down to about 11th magnitude. These measurements were made in two broad bands corresponding to B and V in the UBV photometric system.
The positions of these latter stars were to be determined to a precision of 0.03 arc-sec, a factor of 25 less than the main mission stars. Targeting the observation of around 400,000 stars, the resulting Tycho Catalogue comprised just over 1 million stars, with a subsequent analysis extending this to the Tycho-2 Catalogue of about 2.5 million stars. The attitude of the spacecraft about its center of gravity was controlled to scan the celestial sphere in a regular precessional motion maintaining a constant inclination between the spin axis and the direction to the Sun; the spacecraft spun around its Z-axis at the rate of 11.25 revolutions/day at an angle of 43° to the Sun. The Z-axis rotated about the sun-satellite line at 6.4 revolutions/year. The spacecraft consisted of two platforms and six vertical panels, all made of aluminum honeycomb; the solar array consisted of three deployable sections. Two S-band antennas were located on the top and bottom of the spacecraft, providing an omni-directional downlink data rate of 24 kbit/s.
An attitude and orbit-control subsystem ensured correct dynamic attitude control and determination during the operational lifetim