Proper motion is the astronomical measure of the observed changes in the apparent places of stars or other celestial objects in the sky, as seen from the center of mass of the Solar System, compared to the abstract background of the more distant stars. The components for proper motion in the equatorial coordinate system are given in the direction of right ascension and of declination, their combined value is computed as the total proper motion. It has dimensions of angle per time arcseconds per year or milliarcseconds per year. Knowledge of the proper motion and radial velocity allows calculations of true stellar motion or velocity in space in respect to the Sun, by coordinate transformation, the motion in respect to the Milky Way. Proper motion is not "proper", because it includes a component due to the motion of the Solar System itself. Over the course of centuries, stars appear to maintain nearly fixed positions with respect to each other, so that they form the same constellations over historical time.
Ursa Major or Crux, for example, looks nearly the same now. However, precise long-term observations show that the constellations change shape, albeit slowly, that each star has an independent motion; this motion is caused by the movement of the stars relative to the Solar System. The Sun travels in a nearly circular orbit about the center of the Milky Way at a speed of about 220 km/s at a radius of 8 kPc from the center, which can be taken as the rate of rotation of the Milky Way itself at this radius; the proper motion is a two-dimensional vector and is thus defined by two quantities: its position angle and its magnitude. The first quantity indicates the direction of the proper motion on the celestial sphere, the second quantity is the motion's magnitude expressed in arcseconds per year or milliarcsecond per year. Proper motion may alternatively be defined by the angular changes per year in the star's right ascension and declination, using a constant epoch in defining these; the components of proper motion by convention are arrived at.
Suppose an object moves from coordinates to coordinates in a time Δt. The proper motions are given by: μ α = α 2 − α 1 Δ t, μ δ = δ 2 − δ 1 Δ t; the magnitude of the proper motion μ is given by the Pythagorean theorem: μ 2 = μ δ 2 + μ α 2 ⋅ cos 2 δ, μ 2 = μ δ 2 + μ α ∗ 2, where δ is the declination. The factor in cos2δ accounts for the fact that the radius from the axis of the sphere to its surface varies as cosδ, for example, zero at the pole. Thus, the component of velocity parallel to the equator corresponding to a given angular change in α is smaller the further north the object's location; the change μα, which must be multiplied by cosδ to become a component of the proper motion, is sometimes called the "proper motion in right ascension", μδ the "proper motion in declination". If the proper motion in right ascension has been converted by cosδ, the result is designated μα*. For example, the proper motion results in right ascension in the Hipparcos Catalogue have been converted. Hence, the individual proper motions in right ascension and declination are made equivalent for straightforward calculations of various other stellar motions.
The position angle θ is related to these components by: μ sin θ = μ α cos δ = μ α ∗, μ cos θ = μ δ. Motions in equatorial coordinates can be converted to motions in galactic coordinates. For the majority of stars seen in the sky, the observed proper motions are small and unremarkable; such stars are either faint or are distant, have changes of below 10 milliarcseconds per year, do not appear to move appreciably over many millennia. A few do have significant motions, are called high-proper motion stars. Motions can be in seemingly random directions. Two or more stars, double stars or open star clusters, which are moving in similar directions, exhibit so-called shared or common proper motion, suggesting they may be gravitationally attached or share similar motion in space. Barnard's Star has the largest proper motion of all stars, moving at 10.3 seconds of arc per year. L
Parallax is a displacement or difference in the apparent position of an object viewed along two different lines of sight, is measured by the angle or semi-angle of inclination between those two lines. Due to foreshortening, nearby objects show a larger parallax than farther objects when observed from different positions, so parallax can be used to determine distances. To measure large distances, such as the distance of a planet or a star from Earth, astronomers use the principle of parallax. Here, the term parallax is the semi-angle of inclination between two sight-lines to the star, as observed when Earth is on opposite sides of the Sun in its orbit; these distances form the lowest rung of what is called "the cosmic distance ladder", the first in a succession of methods by which astronomers determine the distances to celestial objects, serving as a basis for other distance measurements in astronomy forming the higher rungs of the ladder. Parallax affects optical instruments such as rifle scopes, binoculars and twin-lens reflex cameras that view objects from different angles.
Many animals, including humans, have two eyes with overlapping visual fields that use parallax to gain depth perception. In computer vision the effect is used for computer stereo vision, there is a device called a parallax rangefinder that uses it to find range, in some variations altitude to a target. A simple everyday example of parallax can be seen in the dashboard of motor vehicles that use a needle-style speedometer gauge; when viewed from directly in front, the speed may show 60. As the eyes of humans and other animals are in different positions on the head, they present different views simultaneously; this is the basis of stereopsis, the process by which the brain exploits the parallax due to the different views from the eye to gain depth perception and estimate distances to objects. Animals use motion parallax, in which the animals move to gain different viewpoints. For example, pigeons down to see depth; the motion parallax is exploited in wiggle stereoscopy, computer graphics which provide depth cues through viewpoint-shifting animation rather than through binocular vision.
Parallax arises due to change in viewpoint occurring due to motion of the observer, of the observed, or of both. What is essential is relative motion. By observing parallax, measuring angles, using geometry, one can determine distance. Astronomers use the word "parallax" as a synonym for "distance measurement" by other methods: see parallax #Astronomy. Stellar parallax created by the relative motion between the Earth and a star can be seen, in the Copernican model, as arising from the orbit of the Earth around the Sun: the star only appears to move relative to more distant objects in the sky. In a geostatic model, the movement of the star would have to be taken as real with the star oscillating across the sky with respect to the background stars. Stellar parallax is most measured using annual parallax, defined as the difference in position of a star as seen from the Earth and Sun, i. e. the angle subtended at a star by the mean radius of the Earth's orbit around the Sun. The parsec is defined as the distance.
Annual parallax is measured by observing the position of a star at different times of the year as the Earth moves through its orbit. Measurement of annual parallax was the first reliable way to determine the distances to the closest stars; the first successful measurements of stellar parallax were made by Friedrich Bessel in 1838 for the star 61 Cygni using a heliometer. Stellar parallax remains the standard for calibrating other measurement methods. Accurate calculations of distance based on stellar parallax require a measurement of the distance from the Earth to the Sun, now based on radar reflection off the surfaces of planets; the angles involved in these calculations are small and thus difficult to measure. The nearest star to the Sun, Proxima Centauri, has a parallax of 0.7687 ± 0.0003 arcsec. This angle is that subtended by an object 2 centimeters in diameter located 5.3 kilometers away. The fact that stellar parallax was so small that it was unobservable at the time was used as the main scientific argument against heliocentrism during the early modern age.
It is clear from Euclid's geometry that the effect would be undetectable if the stars were far enough away, but for various reasons such gigantic distances involved seemed implausible: it was one of Tycho's principal objections to Copernican heliocentrism that in order for it to be compatible with the lack of observable stellar parallax, there would have to be an enormous and unlikely void between the orbit of Saturn and the eighth sphere. In 1989, the satellite Hipparcos was launched for obtaining improved parallaxes and proper motions for over 100,000 nearby stars, increasing the reach of the method tenfold. So, Hipparcos is only able to measure parallax angles for stars up to about 1,600 light-years away, a little more than one percent of the diameter of the Milky Way Galaxy; the European Space Agency's Gaia mission, launched in December 2013, will be able to measure parallax angles to an accuracy of 10 microarcseconds, thus mapping nearby stars up to a distance of tens of thousands of ligh
A giant star is a star with larger radius and luminosity than a main-sequence star of the same surface temperature. They lie above the main sequence on the Hertzsprung–Russell diagram and correspond to luminosity classes II and III; the terms giant and dwarf were coined for stars of quite different luminosity despite similar temperature or spectral type by Ejnar Hertzsprung about 1905. Giant stars have radii up to a few hundred times the Sun and luminosities between 10 and a few thousand times that of the Sun. Stars still more luminous than giants are referred to as hypergiants. A hot, luminous main-sequence star may be referred to as a giant, but any main-sequence star is properly called a dwarf no matter how large and luminous it is. A star becomes a giant after all the hydrogen available for fusion at its core has been depleted and, as a result, leaves the main sequence; the behaviour of a post-main-sequence star depends on its mass. For a star with a mass above about 0.25 solar masses, once the core is depleted of hydrogen it contracts and heats up so that hydrogen starts to fuse in a shell around the core.
The portion of the star outside the shell expands and cools, but with only a small increase in luminosity, the star becomes a subgiant. The inert helium core continues to grow and increase temperature as it accretes helium from the shell, but in stars up to about 10-12 M☉ it does not become hot enough to start helium burning. Instead, after just a few million years the core reaches the Schönberg–Chandrasekhar limit collapses, may become degenerate; this causes the outer layers to expand further and generates a strong convective zone that brings heavy elements to the surface in a process called the first dredge-up. This strong convection increases the transport of energy to the surface, the luminosity increases and the star moves onto the red-giant branch where it will stably burn hydrogen in a shell for a substantial fraction of its entire life; the core continues to gain mass and increase in temperature, whereas there is some mass loss in the outer layers. § 5.9. If the star's mass, when on the main sequence, was below 0.4 M☉, it will never reach the central temperatures necessary to fuse helium.
P. 169. It will therefore remain a hydrogen-fusing red giant until it runs out of hydrogen, at which point it will become a helium white dwarf. § 4.1, 6.1. According to stellar evolution theory, no star of such low mass can have evolved to that stage within the age of the Universe. In stars above about 0.4 M☉ the core temperature reaches 108 K and helium will begin to fuse to carbon and oxygen in the core by the triple-alpha process.§ 5.9, chapter 6. When the core is degenerate helium fusion begins explosively, but most of the energy goes into lifting the degeneracy and the core becomes convective; the energy generated by helium fusion reduces the pressure in the surrounding hydrogen-burning shell, which reduces its energy-generation rate. The overall luminosity of the star decreases, its outer envelope contracts again, the star moves from the red-giant branch to the horizontal branch. Chapter 6; when the core helium is exhausted, a star with up to about 8 M☉ has a carbon–oxygen core that becomes degenerate and starts helium burning in a shell.
As with the earlier collapse of the helium core, this starts convection in the outer layers, triggers a second dredge-up, causes a dramatic increase in size and luminosity. This is the asymptotic giant branch analogous to the red-giant branch but more luminous, with a hydrogen-burning shell contributing most of the energy. Stars only remain on the AGB for around a million years, becoming unstable until they exhaust their fuel, go through a planetary nebula phase, become a carbon–oxygen white dwarf. § 7.1–7.4. Main-sequence stars with masses above about 12 M☉ are very luminous and they move horizontally across the HR diagram when they leave the main sequence becoming blue giants before they expand further into blue supergiants, they start core-helium burning before the core becomes degenerate and develop smoothly into red supergiants without a strong increase in luminosity. At this stage they have comparable luminosities to bright AGB stars although they have much higher masses, but will further increase in luminosity as they burn heavier elements and become a supernova.
Stars in the 8-12 M☉ range have somewhat intermediate properties and have been called super-AGB stars. They follow the tracks of lighter stars through RGB, HB, AGB phases, but are massive enough to initiate core carbon burning and some neon burning, they form oxygen–magnesium–neon cores, which may collapse in an electron-capture supernova, or they may leave behind an oxygen–neon white dwarf. O class main sequence stars are highly luminous; the giant phase for such stars is a brief phase of increased size and luminosity before developing a supergiant spectral luminosity class. Type O giants may be more than a hundred thousand times as luminous as the sun, brighter than many supergiants. Classification is complex and difficult with small differences between luminosity classes and a continuous range of intermediate forms; the most massive stars develop giant or supergiant spectral features while still burning hydrogen in their cores, due to mixing of heavy elements to the surface and high luminosity which produces a powerful stellar wind and causes the star's atmosphere to expand.
A star whose initial mass is less than 0.25 M☉ will not become a giant star at all. For most of th
Ara is a southern constellation situated between Scorpius and Triangulum Australe. Ara was one of the 48 Greek constellations described by the 2nd century astronomer Ptolemy, it remains one of the 88 modern constellations defined by the International Astronomical Union; the orange supergiant Beta Arae is the brightest star in the constellation, with an apparent magnitude of 2.85—marginally brighter than the blue-white Alpha Arae. Seven star systems are known to host planets; the sunlike star Mu Arae hosts four known planets, while Gliese 676 is a binary red dwarf system with four known planets. The Milky Way crosses the northwestern part of Ara. In ancient Greek mythology, Ara was identified as the altar where the gods first made offerings and formed an alliance before defeating the Titans. One of the southernmost constellations depicted by Ptolemy, it had been recorded by Aratus in 270 BC as lying close to the horizon, the Almagest portrays stars as far south as Gamma Arae. Professor of astronomy Bradley Schaefer has proposed that ancient observers must have been able to see as far south as Zeta Arae to define a pattern that looked like an altar.
In illustrations, Ara is depicted as an altar with its smoke'rising' southward. However, depictions of Ara vary in their details. In the early days of printing, a 1482 woodcut of Gaius Julius Hyginus's classic Poeticon Astronomicon depicts the altar as surrounded by demons. Johann Bayer in 1603 depicted Ara as an altar with burning incense. Hyginus depicted Ara as an altar with burning incense, though his Ara featured devils on either side of the flames. However, Willem Blaeu, a Dutch uranographer active in the 16th and 17th centuries, drew Ara as an altar designed for sacrifice, with a burning animal offering. Unlike most depictions, the smoke from Blaeu's Ara rises northward. In Chinese astronomy, the stars of the constellation Ara lie within The Azure Dragon of the East. Five stars of Ara formed a tortoise, while another three formed Chǔ, a pestle; the Wardaman people of the Northern Territory in Australia saw the stars of Ara and the neighbouring constellation Pavo as flying foxes. Covering 237.1 square degrees and hence 0.575% of the sky, Ara ranks 63rd of the 88 modern constellations by area.
Its position in the Southern Celestial Hemisphere means that the whole constellation is visible to observers south of 22°N. Scorpius runs along the length of its northern border, while Norma and Triangulum Australe border it to the west, Apus to the south, Pavo and Telescopium to the east respectively; the three-letter abbreviation for the constellation, as adopted by the International Astronomical Union, is Ara. The official constellation boundaries, as set by Belgian astronomer Eugène Delporte in 1930, are defined by a polygon of twelve segments. In the equatorial coordinate system, the right ascension coordinates of these borders lie between 16h 36.1m and 18h 10.4m, while the declination coordinates are between −45.49° and −67.69°. Bayer gave eight stars Bayer designations, labelling them Alpha through to Theta, though he had never seen the constellation directly as it never rises above the horizon in Germany. After charting the southern constellations, Lacaille recharted the stars of Ara from Alpha though to Sigma, including three pairs of stars next to each other as Epsilon, Kappa and Nu.
Ara thus has rich star fields. Within the constellation's borders, there are 71 stars brighter than or equal to apparent magnitude 6.5. Just shading Alpha Arae, Beta Arae is the brightest star in the constellation, it is an orange-hued star of spectral type K3Ib-IIa, classified as a supergiant or bright giant, around 650 light-years from Earth. It is around 8.21 times 5,636 times as luminous as the Sun. At apparent magnitude 2.85, this difference in brightness between the two is undetectable by the unaided eye. Close to Beta Arae is a blue-hued supergiant of spectral type B1Ib. Of apparent magnitude 3.3, it is 1110 ± 60 light-years from Earth. It has been estimated to be between 12.5 and 25 times as massive as the Sun, have around 120,000 times its luminosity. Alpha Arae is a blue-white main sequence star of magnitude 2.95, 270 ± 20 light-years from Earth. This star is around 9.6 times as massive as the Sun, has an average of 4.5 times its radius. It is 5,800 times as luminous as the Sun, its energy emitted from its outer envelope at an effective temperature of 18,044 K.
A Be star, Alpha Arae is surrounded by a dense equatorial disk of material in Keplerian rotation. The star is losing mass by a polar stellar wind with a terminal velocity of 1,000 km/s. At magnitude 3.13 is Zeta Arae, an orange giant of spectral type K3III, located 490 ± 10 light-years from Earth. Around 7–8 times as massive as the Sun, it has swollen to a diameter around 114 times that of the Sun and is 3800 times as luminous. Delta Arae is a blue-white main sequence star of spectral type B8Vn and magnitude 3.6, 198 ± 4 light-years from Earth. It is around 3.56 times as massive as the Sun. Eta Arae is an orange giant of apparent magnitude 3.76. Exoplanets have been discovered in seven star systems in the constellation. Mu Arae is a sunlike star. HD 152079 is a sunlike star with a planet. HD 154672 is an ageing sunlike star with a Hot Jupiter. HD 154857 is a sunlike star with one suspected planet. HD 156411 is larger than the sun with a gas giant planet in orbit. Gliese 674 is a nearby red dwarf star with a planet.
Gliese 676 is a binary star system composed of two red dwarves with
Right ascension is the angular distance of a particular point measured eastward along the celestial equator from the Sun at the March equinox to the point above the earth in question. When paired with declination, these astronomical coordinates specify the direction of a point on the celestial sphere in the equatorial coordinate system. An old term, right ascension refers to the ascension, or the point on the celestial equator that rises with any celestial object as seen from Earth's equator, where the celestial equator intersects the horizon at a right angle, it contrasts with oblique ascension, the point on the celestial equator that rises with any celestial object as seen from most latitudes on Earth, where the celestial equator intersects the horizon at an oblique angle. Right ascension is the celestial equivalent of terrestrial longitude. Both right ascension and longitude measure an angle from a primary direction on an equator. Right ascension is measured from the Sun at the March equinox i.e. the First Point of Aries, the place on the celestial sphere where the Sun crosses the celestial equator from south to north at the March equinox and is located in the constellation Pisces.
Right ascension is measured continuously in a full circle from that alignment of Earth and Sun in space, that equinox, the measurement increasing towards the east. As seen from Earth, objects noted to have 12h RA are longest visible at the March equinox. On those dates at midnight, such objects will reach their highest point. How high depends on their declination. Any units of angular measure could have been chosen for right ascension, but it is customarily measured in hours and seconds, with 24h being equivalent to a full circle. Astronomers have chosen this unit to measure right ascension because they measure a star's location by timing its passage through the highest point in the sky as the Earth rotates; the line which passes through the highest point in the sky, called the meridian, is the projection of a longitude line onto the celestial sphere. Since a complete circle contains 24h of right ascension or 360°, 1/24 of a circle is measured as 1h of right ascension, or 15°. A full circle, measured in right-ascension units, contains 24 × 60 × 60 = 86400s, or 24 × 60 = 1440m, or 24h.
Because right ascensions are measured in hours, they can be used to time the positions of objects in the sky. For example, if a star with RA = 1h 30m 00s is at its meridian a star with RA = 20h 00m 00s will be on the/at its meridian 18.5 sidereal hours later. Sidereal hour angle, used in celestial navigation, is similar to right ascension, but increases westward rather than eastward. Measured in degrees, it is the complement of right ascension with respect to 24h, it is important not to confuse sidereal hour angle with the astronomical concept of hour angle, which measures angular distance of an object westward from the local meridian. The Earth's axis rotates westward about the poles of the ecliptic, completing one cycle in about 26,000 years; this movement, known as precession, causes the coordinates of stationary celestial objects to change continuously, if rather slowly. Therefore, equatorial coordinates are inherently relative to the year of their observation, astronomers specify them with reference to a particular year, known as an epoch.
Coordinates from different epochs must be mathematically rotated to match each other, or to match a standard epoch. Right ascension for "fixed stars" near the ecliptic and equator increases by about 3.05 seconds per year on average, or 5.1 minutes per century, but for fixed stars further from the ecliptic the rate of change can be anything from negative infinity to positive infinity. The right ascension of Polaris is increasing quickly; the North Ecliptic Pole in Draco and the South Ecliptic Pole in Dorado are always at right ascension 18h and 6h respectively. The used standard epoch is J2000.0, January 1, 2000 at 12:00 TT. The prefix "J" indicates. Prior to J2000.0, astronomers used the successive Besselian epochs B1875.0, B1900.0, B1950.0. The concept of right ascension has been known at least as far back as Hipparchus who measured stars in equatorial coordinates in the 2nd century BC, but Hipparchus and his successors made their star catalogs in ecliptic coordinates, the use of RA was limited to special cases.
With the invention of the telescope, it became possible for astronomers to observe celestial objects in greater detail, provided that the telescope could be kept pointed at the object for a period of time. The easiest way to do, to use an equatorial mount, which allows the telescope to be aligned with one of its two pivots parallel to the Earth's axis. A motorized clock drive is used with an equatorial mount to cancel out the Earth's rotation; as the equatorial mount became adopted for observation, the equatorial coordinate system, which includes right ascension, was adopted at the same time for simplicity. Equatorial mounts could be pointed at objects with known right ascension and declination by the use of setting circles; the first star catalog to use right ascen
The Kelvin scale is an absolute thermodynamic temperature scale using as its null point absolute zero, the temperature at which all thermal motion ceases in the classical description of thermodynamics. The kelvin is the base unit of temperature in the International System of Units; until 2018, the kelvin was defined as the fraction 1/273.16 of the thermodynamic temperature of the triple point of water. In other words, it was defined such that the triple point of water is 273.16 K. On 16 November 2018, a new definition was adopted, in terms of a fixed value of the Boltzmann constant. For legal metrology purposes, the new definition will come into force on 20 May 2019; the Kelvin scale is named after the Belfast-born, Glasgow University engineer and physicist William Thomson, 1st Baron Kelvin, who wrote of the need for an "absolute thermometric scale". Unlike the degree Fahrenheit and degree Celsius, the kelvin is not referred to or written as a degree; the kelvin is the primary unit of temperature measurement in the physical sciences, but is used in conjunction with the degree Celsius, which has the same magnitude.
The definition implies that absolute zero is equivalent to −273.15 °C. In 1848, William Thomson, made Lord Kelvin, wrote in his paper, On an Absolute Thermometric Scale, of the need for a scale whereby "infinite cold" was the scale's null point, which used the degree Celsius for its unit increment. Kelvin calculated; this absolute scale is known today as the Kelvin thermodynamic temperature scale. Kelvin's value of "−273" was the negative reciprocal of 0.00366—the accepted expansion coefficient of gas per degree Celsius relative to the ice point, giving a remarkable consistency to the accepted value. In 1954, Resolution 3 of the 10th General Conference on Weights and Measures gave the Kelvin scale its modern definition by designating the triple point of water as its second defining point and assigned its temperature to 273.16 kelvins. In 1967/1968, Resolution 3 of the 13th CGPM renamed the unit increment of thermodynamic temperature "kelvin", symbol K, replacing "degree Kelvin", symbol °K. Furthermore, feeling it useful to more explicitly define the magnitude of the unit increment, the 13th CGPM held in Resolution 4 that "The kelvin, unit of thermodynamic temperature, is equal to the fraction 1/273.16 of the thermodynamic temperature of the triple point of water."In 2005, the Comité International des Poids et Mesures, a committee of the CGPM, affirmed that for the purposes of delineating the temperature of the triple point of water, the definition of the Kelvin thermodynamic temperature scale would refer to water having an isotopic composition specified as Vienna Standard Mean Ocean Water.
In 2018, Resolution A of the 26th CGPM adopted a significant redefinition of SI base units which included redefining the Kelvin in terms of a fixed value for the Boltzmann constant of 1.380649×10−23 J/K. When spelled out or spoken, the unit is pluralised using the same grammatical rules as for other SI units such as the volt or ohm; when reference is made to the "Kelvin scale", the word "kelvin"—which is a noun—functions adjectivally to modify the noun "scale" and is capitalized. As with most other SI unit symbols there is a space between the kelvin symbol. Before the 13th CGPM in 1967–1968, the unit kelvin was called a "degree", the same as with the other temperature scales at the time, it was distinguished from the other scales with either the adjective suffix "Kelvin" or with "absolute" and its symbol was °K. The latter term, the unit's official name from 1948 until 1954, was ambiguous since it could be interpreted as referring to the Rankine scale. Before the 13th CGPM, the plural form was "degrees absolute".
The 13th CGPM changed the unit name to "kelvin". The omission of "degree" indicates that it is not relative to an arbitrary reference point like the Celsius and Fahrenheit scales, but rather an absolute unit of measure which can be manipulated algebraically. In science and engineering, degrees Celsius and kelvins are used in the same article, where absolute temperatures are given in degrees Celsius, but temperature intervals are given in kelvins. E.g. "its measured value was 0.01028 °C with an uncertainty of 60 µK." This practice is permissible because the degree Celsius is a special name for the kelvin for use in expressing relative temperatures, the magnitude of the degree Celsius is equal to that of the kelvin. Notwithstanding that the official endorsement provided by Resolution 3 of the 13th CGPM states "a temperature interval may be expressed in degrees Celsius", the practice of using both °C and K is widespread throughout the scientific world; the use of SI prefixed forms of the degree Celsius to express a temperature interval has not been adopted.
In 2005 the CIPM embarked on a programme to redefine the kelvin using a more experimentally rigorous methodology. In particular, the committee proposed redefining the kelvin such that Boltzmann's constant takes the exact value 1.3806505×10−23 J/K. The committee had hoped tha
In astronomy, stellar classification is the classification of stars based on their spectral characteristics. Electromagnetic radiation from the star is analyzed by splitting it with a prism or diffraction grating into a spectrum exhibiting the rainbow of colors interspersed with spectral lines; each line indicates a particular chemical element or molecule, with the line strength indicating the abundance of that element. The strengths of the different spectral lines vary due to the temperature of the photosphere, although in some cases there are true abundance differences; the spectral class of a star is a short code summarizing the ionization state, giving an objective measure of the photosphere's temperature. Most stars are classified under the Morgan-Keenan system using the letters O, B, A, F, G, K, M, a sequence from the hottest to the coolest; each letter class is subdivided using a numeric digit with 0 being hottest and 9 being coolest. The sequence has been expanded with classes for other stars and star-like objects that do not fit in the classical system, such as class D for white dwarfs and classes S and C for carbon stars.
In the MK system, a luminosity class is added to the spectral class using Roman numerals. This is based on the width of certain absorption lines in the star's spectrum, which vary with the density of the atmosphere and so distinguish giant stars from dwarfs. Luminosity class 0 or Ia+ is used for hypergiants, class I for supergiants, class II for bright giants, class III for regular giants, class IV for sub-giants, class V for main-sequence stars, class sd for sub-dwarfs, class D for white dwarfs; the full spectral class for the Sun is G2V, indicating a main-sequence star with a temperature around 5,800 K. The conventional color description takes into account only the peak of the stellar spectrum. In actuality, stars radiate in all parts of the spectrum; because all spectral colors combined appear white, the actual apparent colors the human eye would observe are far lighter than the conventional color descriptions would suggest. This characteristic of'lightness' indicates that the simplified assignment of colors within the spectrum can be misleading.
Excluding color-contrast illusions in dim light, there are indigo, or violet stars. Red dwarfs are a deep shade of orange, brown dwarfs do not appear brown, but hypothetically would appear dim grey to a nearby observer; the modern classification system is known as the Morgan–Keenan classification. Each star is assigned a spectral class from the older Harvard spectral classification and a luminosity class using Roman numerals as explained below, forming the star's spectral type. Other modern stellar classification systems, such as the UBV system, are based on color indexes—the measured differences in three or more color magnitudes; those numbers are given labels such as "U-V" or "B-V", which represent the colors passed by two standard filters. The Harvard system is a one-dimensional classification scheme by astronomer Annie Jump Cannon, who re-ordered and simplified a prior alphabetical system. Stars are grouped according to their spectral characteristics by single letters of the alphabet, optionally with numeric subdivisions.
Main-sequence stars vary in surface temperature from 2,000 to 50,000 K, whereas more-evolved stars can have temperatures above 100,000 K. Physically, the classes indicate the temperature of the star's atmosphere and are listed from hottest to coldest; the spectral classes O through M, as well as other more specialized classes discussed are subdivided by Arabic numerals, where 0 denotes the hottest stars of a given class. For example, A0 denotes A9 denotes the coolest ones. Fractional numbers are allowed; the Sun is classified as G2. Conventional color descriptions are traditional in astronomy, represent colors relative to the mean color of an A class star, considered to be white; the apparent color descriptions are what the observer would see if trying to describe the stars under a dark sky without aid to the eye, or with binoculars. However, most stars in the sky, except the brightest ones, appear white or bluish white to the unaided eye because they are too dim for color vision to work. Red supergiants are cooler and redder than dwarfs of the same spectral type, stars with particular spectral features such as carbon stars may be far redder than any black body.
The fact that the Harvard classification of a star indicated its surface or photospheric temperature was not understood until after its development, though by the time the first Hertzsprung–Russell diagram was formulated, this was suspected to be true. In the 1920s, the Indian physicist Meghnad Saha derived a theory of ionization by extending well-known ideas in physical chemistry pertaining to the dissociation of molecules to the ionization of atoms. First he applied it to the solar chromosphere to stellar spectra. Harvard astronomer Cecilia Payne demonstrated that the O-B-A-F-G-K-M spectral sequence is a sequence in temperature; because the classification sequence predates our understanding that it is a temperature sequence, the placement of a spectrum into a given subtype, such as B3 or A7, depends upon estimates of the strengths of absorption features in stellar spectra. As a result, these subtypes are not evenly divided into any sort of mathematically representable intervals; the Yerkes spectral classification called the MKK system from the authors' initial