Port of entry
In general, a port of entry is a place where one may lawfully enter a country. It has border security staff and facilities to check passports and visas, inspect luggage to assure that contraband is not imported. International airports are ports of entry, as are road and rail crossings on a land border. Seaports can be used as ports of entry; the choice of whether to become a port of entry is up to the civil authority controlling the port. An airport of entry is an airport that provides customs and immigration services for incoming flights; these services allow the airport to serve as an initial port of entry for foreign visitors arriving in a country. The word "international" in an airport's name means that it is an airport of entry, but many airports of entry do not use it. Airports of entry can range from large urban airports with heavy scheduled passenger service, like John F. Kennedy International Airport, to small rural airports serving general aviation exclusively. Smaller airports of entry are located near an existing port of entry such as a bridge or seaport.
On the other hand, some "former" airports of entry chose to leave their name with the word "international" in it though they no longer serve international flights. One example is Osaka International Airport; when it had ended all international services and became a purely domestic airport after the opening of Kansai International Airport in 1994, it kept its original name of "Osaka International Airport". Many airports in the nearby region have the same situation, like Taipei Songshan Airport. Songshan retained its official Chinese name, Taipei International Airport, after Chiang Kai-shek International Airport opened. Similar cases of transitions of international airports such as Seoul, Nagoya, Hong Kong, Tehran, etc. For the European Union, flights between countries in the Schengen Area are considered domestic regarding passport and immigration check. Several international airports have only intra Schengen-flights. Several of these have occasional charter flights to foreign countries; some cases of statelessness have occurred in airports of entry, forcing people to stay there for an extended period.
A famous case was of Mehran Karimi Nasseri, an expelled Iranian who lived in the Charles de Gaulle Airport in France for eighteen years after being denied entry to the country. There are two films about Tombés du ciel and The Terminal. Another case is Zahra Kamalfar who lived in the Sheremetyevo International Airport for many months before getting refugee status in Canada; the formal definition of a port of entry in the United States is something different. According to the Code of Federal Regulations, "the terms'port' and'port of entry' incorporate the geographical area under the jurisdiction of a port director." In other words, a port of entry may encompass an area that includes several border crossings, as well as some air and sea ports. This means that not every border crossing is a port of entry. There are two reasons for this: Every port of entry must have a Port Director, a higher pay grade than a typical border inspector; the U. S. government has determined. As a result, border stations like Churubusco and Fort Covington, New York are considered "stations" within the Trout River Port of Entry.
Many roads entering the U. S. had no border inspection station. Before September 11, 2001, it was permissible for persons entering the U. S. to do as long as they proceeded directly to an open border inspection station. In fact, the U. S. Customs Service and U. S. Immigration and Naturalization Service rented property in houses, post offices, storefronts far from the physical border, people entering the U. S. were expected to travel to these locations without stopping so they could make their declarations. This policy has since changed, most of the roads entering the U. S. at locations other than an open and staffed border inspection station have since been barricaded. In some countries, immigration procedures are carried out by the armed forces rather than specific immigration officers. However, in most, the levying of duty on imports is still carried out by customs officers. Immigration clearance in some ports of entry have automated sections open to the country's own residents or citizens, such as the E-Channel found in Hong Kong and Macau, Global Entry found at some airports in the United States.
On some international borders, the concept of a port of entry does not exist. Travelers may cross the border wherever and whenever convenient, for example within the Schengen Area. In some cases this may be restricted to citizens of specific countries and to travelers who are not carrying goods over the customs limits. Border Border checkpoint Border control Customs Schengen Agreement
A seaplane is a powered fixed-wing aircraft capable of taking off and landing on water. Seaplanes that can take off and land on airfields are in a subclass called amphibious aircraft. Seaplanes and amphibians are divided into two categories based on their technological characteristics: floatplanes and flying boats; these aircraft were sometimes called hydroplanes, but this term applies instead to motor-powered watercraft that use the technique of hydrodynamic lift to skim the surface of water when running at speed. Their use tailed off after World War II because of the investments in airports during the war. In the 21st century, seaplanes maintain a few niche uses, such as for dropping water on forest fires, air transport around archipelagos, access to undeveloped or roadless areas, some of which have numerous lakes; the word "seaplane" is used to describe two types of air/water vehicles: the floatplane and the flying boat. A floatplane has slender pontoons, or mounted under the fuselage. Two floats are common.
Only the floats of a floatplane come into contact with water. The fuselage remains above water; some small land aircraft can be modified to become float planes, in general, floatplanes are small aircraft. Floatplanes are limited by their inability to handle wave heights greater than 12 inches; these floats add to the empty weight of the airplane and to the drag coefficient, resulting in reduced payload capacity, slower rate of climb, slower cruise speed. In a flying boat, the main source of buoyancy is the fuselage, which acts like a ship's hull in the water because the fuselage's underside has been hydrodynamically shaped to allow water to flow around it. Most flying boats have small floats mounted on their wings to keep them stable. Not all small seaplanes have been floatplanes, but most large seaplanes have been flying boats, with their great weight supported by their hulls; the term "seaplane" is used by some instead of "floatplane". This is the standard British usage; this article treats both flying boats and floatplanes in the US fashion.
An amphibious aircraft can land both on conventional runways and water. A true seaplane can only land on water. There are amphibious flying boats and amphibious floatplanes, as well as some hybrid designs, e.g. floatplanes with retractable floats. Modern production seaplanes are most light aircraft, of a floatplane design; the Frenchman Alphonse Pénaud filed the first patent for a flying machine with a boat hull and retractable landing gear in 1876, but Austrian Wilhelm Kress is credited with building the first seaplane, Drachenflieger, in 1898, although its two 30 hp Daimler engines were inadequate for take-off, it sank when one of its two floats collapsed. On 6 June 6, 1905, Gabriel Voisin took off and landed on the River Seine with a towed kite glider on floats; the first of his unpowered flights was 150 yards. He built a powered floatplane in partnership with Louis Blériot, but the machine was unsuccessful. Other pioneers attempted to attach floats to aircraft in Britain, Australia and the United States.
On 28 March 1910, Frenchman Henri Fabre flew the first successful powered seaplane, the Gnome Omega-powered hydravion, a trimaran floatplane. Fabre's first successful take off and landing by a powered seaplane inspired other aviators, he designed floats for several other flyers; the first hydro-aeroplane competition was held in Monaco in March 1912, featuring aircraft using floats from Fabre, Curtiss and Farman. This led to the first scheduled seaplane passenger services, at Aix-les-Bains, using a five-seat Sanchez-Besa from 1 August 1912; the French Navy ordered its first floatplane in 1912. In 1911−12, François Denhaut constructed the first seaplane with a fuselage forming a hull, using various designs to give hydrodynamic lift at take-off, its first successful flight was on 13 April 1912. Throughout 1910 and 1911, American pioneering aviator Glenn Curtiss developed his floatplane into the successful Curtiss Model D land-plane, which used a larger central float and sponsons. Combining floats with wheels, he made the first amphibian flights in February 1911 and was awarded the first Collier Trophy for US flight achievement.
From 1912, his experiments with a hulled seaplane resulted in the 1913 Model E and Model F, which he called "flying-boats". In February 1911, the United States Navy took delivery of the Curtiss Model E and soon tested landings on and take-offs from ships, using the Curtiss Model D. In Britain, Captain Edward Wakefield and Oscar Gnosspelius began to explore the feasibility of flight from water in 1908, they decided to make use of Windermere in England's largest lake. The latter's first attempts to fly attracted large crowds, though the aircraft failed to take off and required a re-design of the floats incorporating features of Borwick’s successful speed-boat hulls. Meanwhile, Wakefield ordered a floatplane similar to the design of the 1910 Fabre Hydravion. By November 1911, both Gnosspelius and Wakefield had aircraft capable of flight from water and awaited suitable weather conditions. Gnosspelius's flight was short-lived. Wakefield’s pilot, taking advantage of a light northerly wind took off and flew at a height of 50 feet to Ferry Nab, where he made a wide turn and returned for a perfect landing on the lake’s surface.
In Switzerland, Emile Taddéoli equipped the Dufaux 4 biplane with swimmers and took off in 1912. A seaplane was used during the Balkan Wars in 1913, when a Greek "Astra Hydravion" did
Not to be confused with Canadian Transportation Agency. Transport Canada is the department within the Government of Canada responsible for developing regulations and services of transportation in Canada, it is part of the Transportation and Communities portfolio. The current Minister of Transport is Marc Garneau. Transport Canada is headquartered in Ontario; the Department of Transport was created in 1935 by the government of William Lyon Mackenzie King in recognition of the changing transportation environment in Canada at the time. It merged three departments: the former Department of Railways and Canals, the Department of Marine and Fisheries, the Civil Aviation Branch of the Department of National Defence under C. D. Howe, who would use the portfolio to rationalize the governance and provision of all forms of transportation, he created Trans-Canada Air Lines. The Department of Transport Act came into force November 2, 1936. Prior to a 1994 federal government reorganization, Transport Canada had a wide range of operational responsibilities including the Canadian Coast Guard, the Saint Lawrence Seaway and seaports, as well as Via Rail and CN Rail.
Significant cuts to Transport Canada at that time resulted in CN Rail being privatized, the coast guard being transferred to Fisheries and Oceans, the seaway and various ports and airports being transferred to local operating authorities. Transport Canada emerged from this process as a department focused on policy and regulation rather than transportation operations. In 2004, Transport Canada introduced non-passenger screening to enhance both airport and civil aviation security. Transport Canada's headquarters are located in Ottawa at Place de Ville, Tower C. Transport Canada has regional headquarters in: Vancouver – Government of Canada Building on Burrard Street and Robson Street Edmonton – Canada Place, 9700 Jasper Avenue NW Winnipeg – Macdonald Building, 344 Edmonton Street Toronto – Government of Canada Building, 4900 Yonge Street Dorval – Pierre Elliott Trudeau Airport, 700 Place Leigh-Capreol Moncton – Heritage Building, 95 Foundry Street Minister of Transport Marc GarneauDeputy Minister, Transport Canada Michael KeenanAssociate Deputy Minister, Thao Pham Assistant Deputy Minister and Security, Kevin Brousseau Associate Assistant Deputy Minister and Security, Aaron McCrombie Assistant Deputy Minister, Pierre-Marc Mongeau Associate Assistant Deputy Minister and Lead, Navigation Protection Act Review, Catherine Higgens Assistant Deputy Minister, Lawrence Hanson Assistant Deputy Minister, Corporate Services, André Lapointe Assistant Deputy Minister, Natasha Rascanin Director General, Corporate Secretariat, Tom Oommen Director General and Marketing, Dan Dugas Regional Director General, Atlantic Region, Ann Mowatt Regional Director General, Quebec Region, Albert Deschamps Regional Director General, Ontario Region, Tamara Rudge Regional Director General and Northern Region, Michele Taylor Regional Director General, Pacific Region, Robert Dick Departmental General Counsel, Henry K. Schultz Chief Audit and Evaluation Executive, Martin Rubenstein Transport Canada is responsible for enforcing several Canadian legislation, including the Aeronautics Act, Transportation of Dangerous Goods Act, Motor Vehicle Safety Act, Canada Transportation Act, Railway Safety Act, Canada Shipping Act, 2001, Marine Transportation Security Act amongst others.
Each inspector with delegated power from the Minister of Transport receives official credentials to exercise their power, as shown on the right. These inspectors are public officers identified within the Criminal Code of Canada; the Motor Vehicle Safety Act was established in 1971 in order to create safety standards for cars in Canada. The department acts as the federal government's funding partner with provincial transport ministries on jointly-funded provincial transportation infrastructure projects for new highways. TC manage a database of traffic collisions in Canada. Transport Canada's role in railways include: railway safety surface and intermodal security strategies for rail travel accessibility safety of federally regulated railway bridges safety and security of international bridges and tunnels Inspecting and testing traffic control signals, grade crossing warning systems rail operating rules regulations and services for safe transport of dangerous goods Canadian Transport Emergency Centre to assist emergency response and handling dangerous goods emergenciesFollowing allegations by shippers of service level deterioration, on April 7, 2008, the federal government of Canada launched a review of railway freight service within the country.
Transport Canada, managing the review, plans to investigate the relationships between Canadian shippers and the rail industry with regards to the two largest railroad companies in the country, Canadian Pacific Railway and Canadian National Railway. On June 26, 2013, the Fair Rail Freight Service Act became law, a response to the Rail Freight Service Review’s Final Report. Transport Canada is responsible for the waterways inside and surrounding Canada; these responsibilities include: responding and investigating marine accidents within Canadian waters enforcing marine acts and regulations establishing and enforcing marine personnel standards and pilotage Marine Safety Marine Security regulating the operation of marine vessels in Canadian watersAs of 2003 the Office of Boating Safety and the Navigable Waters Protection Program were transferred back to Transport Canada. As was certain regulatory aspects of Emergen
Canada Border Services Agency
The Canada Border Services Agency is a federal agency, responsible for border protection and surveillance, immigration enforcement and customs services in Canada. The CBSA is accountable to Parliament through the Minister of Public Safety and Emergency Preparedness; the CBSA was created on December 12, 2003, by an order-in-council amalgamating Canada Customs with border and enforcement personnel from the Department of Citizenship and Immigration Canada and the Canadian Food Inspection Agency. The Agency's creation was formalized by the Canada Border Services Agency Act, which received Royal Assent on November 3, 2005. Since the September 11 attacks against the United States, Canada's border operations have placed an enhanced emphasis on national security and public safety; the Canada–United States Smart Border Declaration, created by John Manley and Tom Ridge first U. S. Secretary of Homeland Security of the Department of Homeland Security, has provided objectives for co-operation between Canadian and American border operations.
The CBSA oversees 1,200 service locations across Canada, 39 in other countries. It employs over 12,000 public servants, offers around-the-clock service at 119 land border crossings and thirteen international airports, it works with the Department of Immigration and Citizenship to enforce Canada's immigration laws by facilitating the removal of inadmissible individuals from the country and assisting local police in the investigation of violations of the Immigration and Refugee Protection Act. The Agency oversees operations at three major sea ports and three mail centres, operates detention facilities known as immigration holding centres in Laval and Vancouver; the CBSA operates an Inland Enforcement branch, which tracks down and removes foreign nationals who are in Canada illegally. Inland Enforcement Officers are "plain-clothes" units, are armed with the same sidearm pistol as port of entry Border Services Officers. Prior to 2004, border security in Canada was handled by three legacy agencies: Canada Customs and Revenue Agency Citizenship and Immigration Canada Canadian Food Inspection AgencyThe CBSA was created in an attempt to address issues found in a review by the Auditor General, including an inability to share certain security information and shortcomings in inter-agency communication.
In addition to using generic identifiers imposed by the Federal Identity Program, the CBSA is one of several federal departments that have been granted heraldic symbols by the Canadian Heraldic Authority. The coat of arms was granted on June 15, 2010, presented by Her Majesty Queen Elizabeth II on July 6, 2010; the ceremony was the Queen's last function on her 2010 Canadian Royal Tour. In attendance were Governor General Michaëlle Jean and Prime Minister Stephen Harper. Use of the coat of arms is reserved for special occasions, it is associated with the office of the CBSA President; the heraldic badge was approved for use at the same time as the coat of arms. It portrays a gold tressure; the portcullis represents Her Majesty's agents responsible for border services. The Latin motto of Protectio Servitium Integritas translates as "Protection, Integrity"; the badge figures prominently in the television series Border Security: Canada's Front Line. A flag was approved for use on December 20, 2012, it is meant to resemble Canada's Blue Ensign, flown on government vessels prior to 1965.
Canada Customs officers, their successor officers of the CBSA during the latter's initial years, did not have firearms, instead relying on a local RCMP detachment to provide backup if armed force was required. Since the creation of the Agency in 2003, the CBSA has undergone significant changes to its overall structure, as services offered by different agencies are now housed under a single banner. Not only has the structure of the organization changed, but the range of duties and the institutional priorities have changed. Where the prior coupling of Canada Customs with the Canada Revenue Agency lent itself to a focus on tax collection, the new Agency was created to address heightened security concerns post-9/11, to respond to criticisms from the United States, that Canada was not doing enough to ensure the security of North America. Substantial changes began before the 2001 terrorist attacks in the United States. In May 1998, the Government of Canada passed an Act to amend the Customs Act and the Criminal Code, which changed agency policy to allow the officers to arrest and detain individuals at the border for non-customs related violations of Canadian law.
These new responsibilities led to the implementation of use of force policies. Border Services Officers across Canada started to carry collapsible batons, OC spray and handcuffs, although it was still several years before they would be equipped with firearms; the 2006 Canadian federal budget introduced $101 million to equip Border Services Officers with side arms and to eliminate single-person border crossings to help officers perform their duties. The decision to arm BSOs has been a subject of some controversy in Canada for several years since previous governments felt that unarmed officers made the country less intimidating to visitors, as opposed to the U. S. Customs and Border Protection, whose officers have carried side arms for decades. Supporters of arming BSOs said that this would help the CBSA shed its lax reputation an
Quebec is one of the thirteen provinces and territories of Canada. It is bordered to the west by the province of Ontario and the bodies of water James Bay and Hudson Bay. S. states of Maine, New Hampshire and New York. It shares maritime borders with Nunavut, Prince Edward Island, Nova Scotia. Quebec is Canada's largest province by its second-largest administrative division, it is and politically considered to be part of Central Canada. Quebec is the second-most populous province of Canada, after Ontario, it is the only one to have a predominantly French-speaking population, with French as the sole provincial official language. Most inhabitants live in urban areas near the Saint Lawrence River between Montreal and Quebec City, the capital. Half of Quebec residents live in the Greater Montreal Area, including the Island of Montreal. English-speaking communities and English-language institutions are concentrated in the west of the island of Montreal but are significantly present in the Outaouais, Eastern Townships, Gaspé regions.
The Nord-du-Québec region, occupying the northern half of the province, is sparsely populated and inhabited by Aboriginal peoples. The climate around the major cities is four-seasons continental with cold and snowy winters combined with warm to hot humid summers, but farther north long winter seasons dominate and as a result the northern areas of the province are marked by tundra conditions. In central Quebec, at comparatively southerly latitudes, winters are severe in inland areas. Quebec independence debates have played a large role in the politics of the province. Parti Québécois governments held referendums on sovereignty in 1980 and 1995. Although neither passed, the 1995 referendum saw the highest voter turnout in Quebec history, at over 93%, only failed by less than 1%. In 2006, the House of Commons of Canada passed a symbolic motion recognizing the "Québécois as a nation within a united Canada". While the province's substantial natural resources have long been the mainstay of its economy, sectors of the knowledge economy such as aerospace and communication technologies and the pharmaceutical industry play leading roles.
These many industries have all contributed to helping Quebec become an economically influential province within Canada, second only to Ontario in economic output. The name "Québec", which comes from the Algonquin word kébec meaning "where the river narrows" referred to the area around Quebec City where the Saint Lawrence River narrows to a cliff-lined gap. Early variations in the spelling of the name included Kébec. French explorer Samuel de Champlain chose the name Québec in 1608 for the colonial outpost he would use as the administrative seat for the French colony of New France; the province is sometimes referred to as "La belle province". The Province of Quebec was founded in the Royal Proclamation of 1763 after the Treaty of Paris formally transferred the French colony of Canada to Britain after the Seven Years' War; the proclamation restricted the province to an area along the banks of the Saint Lawrence River. The Quebec Act of 1774 expanded the territory of the province to include the Great Lakes and the Ohio River Valley and south of Rupert's Land, more or less restoring the borders existing under French rule before the Conquest of 1760.
The Treaty of Paris ceded territories south of the Great Lakes to the United States. After the Constitutional Act of 1791, the territory was divided between Lower Canada and Upper Canada, with each being granted an elected legislative assembly. In 1840, these become Canada East and Canada West after the British Parliament unified Upper and Lower Canada into the Province of Canada; this territory was redivided into the Provinces of Quebec and Ontario at Confederation in 1867. Each became one of the first four provinces. In 1870, Canada purchased Rupert's Land from the Hudson's Bay Company and over the next few decades the Parliament of Canada transferred to Quebec portions of this territory that would more than triple the size of the province. In 1898, the Canadian Parliament passed the first Quebec Boundary Extension Act that expanded the provincial boundaries northward to include the lands of the local aboriginal peoples; this was followed by the addition of the District of Ungava through the Quebec Boundaries Extension Act of 1912 that added the northernmost lands of the Inuit to create the modern Province of Quebec.
In 1927, the border between Quebec and Newfoundland and Labrador was established by the British Judicial Committee of the Privy Council. Quebec disputes this boundary. Located in the eastern part of Canada, part of Central Canada, Quebec occupies a territory nearly three times the size of France or Texas, most of, sparsely populated, its topography is different from one region to another due to the varying composition of the ground, the climate, the proximity to water. The Saint Lawrence Lowland and the Appalachians are the two main topographic regions in southern Quebec, while the Canadian Shield occupies most of central and northern Quebec. Quebec has one of the world's largest reserves of fresh water, occupying 12% of its surface, it has 3 % of the world's renewable fresh water. Mor
According to the International Civil Aviation Organization, a runway is a "defined rectangular area on a land aerodrome prepared for the landing and takeoff of aircraft". Runways may be a natural surface. In January 1919, aviation pioneer Orville Wright underlined the need for "distinctly marked and prepared landing places, the preparing of the surface of reasonably flat ground an expensive undertaking there would be a continuous expense for the upkeep." Runways are named by a number between 01 and 36, the magnetic azimuth of the runway's heading in decadegrees. This heading differs from true north by the local magnetic declination. A runway numbered 09 points east, runway 18 is south, runway 27 points west and runway 36 points to the north; when taking off from or landing on runway 09, a plane is heading around 90°. A runway can be used in both directions, is named for each direction separately: e.g. "runway 15" in one direction is "runway 33" when used in the other. The two numbers differ by 18.
For clarity in radio communications, each digit in the runway name is pronounced individually: runway one-five, runway three-three, etc.. A leading zero, for example in "runway zero-six" or "runway zero-one-left", is included for all ICAO and some U. S. military airports. However, most U. S. civil aviation airports drop the leading zero. This includes some military airfields such as Cairns Army Airfield; this American anomaly may lead to inconsistencies in conversations between American pilots and controllers in other countries. It is common in a country such as Canada for a controller to clear an incoming American aircraft to, for example, runway 04, the pilot read back the clearance as runway 4. In flight simulation programs those of American origin might apply U. S. usage to airports around the world. For example, runway 05 at Halifax will appear on the program as the single digit 5 rather than 05. If there is more than one runway pointing in the same direction, each runway is identified by appending left and right to the number to identify its position — for example, runways one-five-left, one-five-center, one-five-right.
Runway zero-three-left becomes runway two-one-right. In some countries, regulations mandate that where parallel runways are too close to each other, only one may be used at a time under certain conditions. At large airports with four or more parallel runways some runway identifiers are shifted by 1 to avoid the ambiguity that would result with more than three parallel runways. For example, in Los Angeles, this system results in runways 6L, 6R, 7L, 7R though all four runways are parallel at 69°. At Dallas/Fort Worth International Airport, there are five parallel runways, named 17L, 17C, 17R, 18L, 18R, all oriented at a heading of 175.4°. An airport with only three parallel runways may use different runway identifiers, such as when a third parallel runway was opened at Phoenix Sky Harbor International Airport in 2000 to the south of existing 8R/26L — rather than confusingly becoming the "new" 8R/26L it was instead designated 7R/25L, with the former 8R/26L becoming 7L/25R and 8L/26R becoming 8/26.
Runway designations may change over time because Earth's magnetic lines drift on the surface and the magnetic direction changes. Depending on the airport location and how much drift occurs, it may be necessary to change the runway designation; as runways are designated with headings rounded to the nearest 10°, this affects some runways sooner than others. For example, if the magnetic heading of a runway is 233°, it is designated Runway 23. If the magnetic heading changes downwards by 5 degrees to 228°, the runway remains Runway 23. If on the other hand the original magnetic heading was 226°, the heading decreased by only 2 degrees to 224°, the runway becomes Runway 22; because magnetic drift itself is slow, runway designation changes are uncommon, not welcomed, as they require an accompanying change in aeronautical charts and descriptive documents. When runway designations do change at major airports, it is changed at night as taxiway signs need to be changed and the huge numbers at each end of the runway need to be repainted to the new runway designators.
In July 2009 for example, London Stansted Airport in the United Kingdom changed its runway designations from 05/23 to 04/22 during the night. For fixed-wing aircraft it is advantageous to perform takeoffs and landings into the wind to reduce takeoff or landing roll and reduce the ground speed needed to attain flying speed. Larger airports have several runways in different directions, so that one can be selected, most nearly aligned with the wind. Airports with one runway are constructed to be aligned with the prevailing wind. Compiling a wind rose is in fact one of the preliminary steps taken in constructing airport runways. Note that wind direction is given as the direction the wind is coming from: a plane taking off from runway 09 faces east, into an "east wind" blowing from 090°. Runway dimensions vary from as small as 245 m long and 8 m wide in s
General Aviation represents the'private transport' and recreational flying component of aviation. General aviation is the name or term given to all civil aviation aircraft operations with the exception of commercial air transport or aerial work, they are flight activities not involving commercial air transportation of passengers, cargo or mail for remuneration or hire, or an aerial work operation such as agriculture, photography, surveying and patrol, search and rescue, aerial advertisement, etc. It covers certain commercial and private flights that can be carried out under both visual flight and instrument flight rules, such as light aircraft and private jets or helicopters. General aviation thus represents the'private transport' component of aviation; the International Civil Aviation Organization defines civil aviation aircraft operations in three categories: General Aviation, Aerial Work and Commercial Air Transport. The International Council of Aircraft Owner and Pilot Associations includes the following definitions for General Aviation aircraft activities: Corporate Aviation: Company own-use flight operations Fractional Ownership Operations: aircraft operated by a specialized company on behalf of two or more co-owners Business Aviation: self-flown for business purposes Personal/Private Travel: travel for personal reasons/personal transport Air Tourism: self-flown incoming/outgoing tourism Recreational Flying: powered/powerless leisure flying activities Air Sports: Aerobatics, Air Races, Rallies etc.
In 2003 the European Aviation Safety Agency was established as the central EU regulator, taking over responsibility for legislating airworthiness and environmental regulation from the national authorities. Of the 21,000 civil aircraft registered in the UK, 96 percent are engaged in GA operations, annually the GA fleet accounts for between 1.25 and 1.35 million hours flown. There are 28,000 Private Pilot Licence holders, 10,000 certified glider pilots; some of the 19,000 pilots who hold professional licences are engaged in GA activities. GA operates from more than 1,800 airports and landing sites or aerodromes, ranging in size from large regional airports to farm strips. GA is regulated by the Civil Aviation Authority, although regulatory powers are being transferred to the European Aviation Safety Agency; the main focus is on standards of airworthiness and pilot licensing, the objective is to promote high standards of safety. General aviation is popular in North America, with over 6,300 airports available for public use by pilots of general aviation aircraft.
In comparison, scheduled flights operate from around 560 airports in the U. S. According to the U. S. Aircraft Owners and Pilots Association, general aviation provides more than one percent of the United States' GDP, accounting for 1.3 million jobs in professional services and manufacturing. Most countries have authorities that oversee all civil aviation, including general aviation, adhering to the standardized codes of the International Civil Aviation Organization. Examples include the Federal Aviation Administration in the United States, the Civil Aviation Authority in the United Kingdom, Civil Aviation Authority of Zimbabwe in Zimbabwe, the Luftfahrt-Bundesamt in Germany, the Bundesamt für Zivilluftfahrt in Switzerland, Transport Canada in Canada, the Civil Aviation Safety Authority in Australia, the Directorate General of Civil Aviation in India and Iran Civil Aviation Organization in Iran. Aviation accident rate statistics are estimates. According to the U. S. National Transportation Safety Board, in 2005 general aviation in the United States suffered 1.31 fatal accidents for every 100,000 hours of flying in that country, compared to 0.016 for scheduled airline flights.
In Canada, recreational flying accounted for 0.7 fatal accidents for every 1000 aircraft, while air taxi accounted for 1.1 fatal accidents for every 100,000 hours. More experienced GA pilots appear safer, although the relations between flight hours, accident frequency, accident rates are complex and difficult to assess. Environmental impact of aviation List of current production certified light aircraftAssociationsAircraft Owners and Pilots Association Canadian Owners and Pilots Association Experimental Aircraft Association General Aviation Manufacturers Association National Business Aviation Association International Aircraft Owners and Pilots Associations European General Aviation Safety Team "No Plane No Gain" website about business aviation Save-GA.org website concerned with General Aviation in the United States "GA price index". Flight International. 13 Oct 1979