Brentwood is an inner-ring suburb of St. Louis, located in St. Louis County, United States; the population was 8,055 at the 2010 census. Brentwood is home to Brentwood High School. Brentwood is located at 38°37′9″N 90°20′55″W. According to the United States Census Bureau, the city has a total area of 1.96 square miles, all land. The area, Brentwood consists of three land purchases: that of Louis J. Bompart who acquired his lot first in 1804, that of the Gay family, that of the Marshall family. In the 1870s, a man by the name of Thomas Madden arrived and soon became the businessman of the community, he operated a rock quarry, constructed a tavern, a barbershop, a grocery store, a blacksmith shop. Due to Madden's prominence in the community, the town was named Maddenville. With a location on the Manchester Trail, a route, frequented by mail coaches and prairie schooners going west, Maddenville in the 1800s became a prosperous town on the outskirts of St. Louis, to which it was connected by a streetcar line.
In 1919, it was discovered by the residents of Maddenville that the inhabitants of the neighboring Maplewood were planning to elect whether or not to annex their town. To avoid annexation and to establish their own school district, the residents decided to incorporate Maddenville into a village. On December 15, 1919, the town of Maddenville became the village of Brentwood. During the late 1920s, the village earned an unhealthy reputation for its numerous gambling houses and illegal activities that took place around the intersection of Manchester Road and Brentwood Boulevard; the first mayor, James L. Willingham, ran on the promise to clean Brentwood up and eliminate the casinos, along with the hoodlums who hung around them, which he did; the town became once again attractive for families. On April 12, 1929, Willingham signed ordinance 1A, which established Brentwood as a city and determined its boundaries; as of the census of 2010, there were 8,055 people, 4,136 households, 1,832 families residing in the city.
The population density was 4,109.7 inhabitants per square mile. There were 4,410 housing units at an average density of 2,250.0 per square mile. The racial makeup of the city was 87.5% White, 3.1% African American, 0.1% Native American, 6.8% Asian, 0.6% from other races, 1.9% from two or more races. Hispanic or Latino of any race were 2.8% of the population. There were 4,136 households of which 20.8% had children under the age of 18 living with them, 33.6% were married couples living together, 8.0% had a female householder with no husband present, 2.8% had a male householder with no wife present, 55.7% were non-families. 46.1% of all households were made up of individuals and 9.5% had someone living alone, 65 years of age or older. The average household size was 1.94 and the average family size was 2.86. The median age in the city was 35 years. 18.4% of residents were under the age of 18. The gender makeup of the city was 46.1% male and 53.9% female. As of the census of 2000, there were 7,693 people, 3,929 households, 1,775 families residing in the city.
The population density was 3,948.4 people per square mile. There were 4,088 housing units at an average density of 2,098.1 per square mile. The racial makeup of the city was 92.68% White, 1.81% African American, 0.19% Native American, 3.48% Asian, 0.32% from other races.0278 Hispanic or Latino of any race were 1.73% of the population. There were 3,929 households out of which 19.7% had children under the age of 18 living with them, 35.3% were married couples living together, 7.8% had a female householder with no husband present, 54.8% were non-families. 46.5% of all households were made up of individuals and 11.2% had someone living alone, 65 years of age or older. The average household size was 1.96 and the average family size was 2.88. In the city the population was spread out with 19.2% under the age of 18, 7.2% from 18 to 24, 40.2% from 25 to 44, 19.0% from 45 to 64, 14.4% who were 65 years of age or older. The median age was 36 years; the median income for a household in the city was $60,643, the median income for a family was $63,311.
Males had a median income of $47,113 versus $38,924 for females. The per capita income for the city was $30,645. About 3.4% of families and 5.5% of the population were below the poverty line, including 5.7% of those under age 18 and 7.7% of those age 65 or over. Brentwood School District operates two elementary schools, one middle school, Brentwood High School; the town has the Brentwood Public Library. City of Brentwood official website
Per capita income
Per capita income or average income measures the average income earned per person in a given area in a specified year. It is calculated by dividing the area's total income by its total population. Per capita income is national income divided by population size. Per capita income is used to measure an area's average income and compare the wealth of different populations. Per capita income is used to measure a country's standard of living, it is expressed in terms of a used international currency such as the euro or United States dollar, is useful because it is known, is calculable from available gross domestic product and population estimates, produces a useful statistic for comparison of wealth between sovereign territories. This helps to ascertain a country's development status, it is one of the three measures for calculating the Human Development Index of a country. In the United States, it is defined by the U. S. Census Bureau as the following: "Per capita income is the mean money income received in the past 12 months computed for every man and child in a geographic area."
Critics claim that per capita income has several weaknesses in measuring prosperity: Comparisons of per capita income over time need to consider inflation. Without adjusting for inflation, figures tend to overstate the effects of economic growth. International comparisons can be distorted by cost of living differences not reflected in exchange rates. Where the objective is to compare living standards between countries, adjusting for differences in purchasing power parity will more reflect what people are able to buy with their money, it does not reflect income distribution. If a country's income distribution is skewed, a small wealthy class can increase per capita income while the majority of the population has no change in income. In this respect, median income is more useful when measuring of prosperity than per capita income, as it is less influenced by outliers. Non-monetary activity, such as barter or services provided within the family, is not counted; the importance of these services varies among economies.
Per capita income does not consider whether income is invested in factors to improve the area's development, such as health, education, or infrastructure. List of countries by average wage List of countries by GDP per capita—GDP at market or government official exchange rates per inhabitant List of countries by GDP per capita—GDP calculated at purchasing power parity exchange per inhabitant List of countries by GNI per capita List of countries by GNI per capita List of countries by income equality Total personal income
Race and ethnicity in the United States Census
Race and ethnicity in the United States Census, defined by the federal Office of Management and Budget and the United States Census Bureau, are self-identification data items in which residents choose the race or races with which they most identify, indicate whether or not they are of Hispanic or Latino origin. The racial categories represent a social-political construct for the race or races that respondents consider themselves to be and, "generally reflect a social definition of race recognized in this country." OMB defines the concept of race as outlined for the US Census as not "scientific or anthropological" and takes into account "social and cultural characteristics as well as ancestry", using "appropriate scientific methodologies" that are not "primarily biological or genetic in reference." The race categories include both national-origin groups. Race and ethnicity are considered separate and distinct identities, with Hispanic or Latino origin asked as a separate question. Thus, in addition to their race or races, all respondents are categorized by membership in one of two ethnic categories, which are "Hispanic or Latino" and "Not Hispanic or Latino".
However, the practice of separating "race" and "ethnicity" as different categories has been criticized both by the American Anthropological Association and members of US Commission on Civil Rights. In 1997, OMB issued a Federal Register notice regarding revisions to the standards for the classification of federal data on race and ethnicity. OMB developed race and ethnic standards in order to provide "consistent data on race and ethnicity throughout the Federal Government; the development of the data standards stem in large measure from new responsibilities to enforce civil rights laws." Among the changes, OMB issued the instruction to "mark one or more races" after noting evidence of increasing numbers of interracial children and wanting to capture the diversity in a measurable way and having received requests by people who wanted to be able to acknowledge their or their children's full ancestry rather than identifying with only one group. Prior to this decision, the Census and other government data collections asked people to report only one race.
The OMB states, "many federal programs are put into effect based on the race data obtained from the decennial census. Race data are critical for the basic research behind many policy decisions. States require these data to meet legislative redistricting requirements; the data are needed to monitor compliance with the Voting Rights Act by local jurisdictions". "Data on ethnic groups are important for putting into effect a number of federal statutes. Data on Ethnic Groups are needed by local governments to run programs and meet legislative requirements." The 1790 United States Census was the first census in the history of the United States. The population of the United States was recorded as 3,929,214 as of Census Day, August 2, 1790, as mandated by Article I, Section 2 of the United States Constitution and applicable laws."The law required that every household be visited, that completed census schedules be posted in'two of the most public places within, there to remain for the inspection of all concerned...' and that'the aggregate amount of each description of persons' for every district be transmitted to the president."
This law along with U. S. marshals were responsible for governing the census. One third of the original census data has been lost or destroyed since documentation; the data was lost in 1790–1830 time period and included data from: Connecticut, Maryland, New Hampshire, New York, North Carolina, Rhode Island, South Carolina, Delaware, New Jersey, Virginia. Census data included the name of the head of the family and categorized inhabitants as follows: free white males at least 16 years of age, free white males under 16 years of age, free white females, all other free persons, slaves. Thomas Jefferson the Secretary of State, directed marshals to collect data from all thirteen states, from the Southwest Territory; the census was not conducted in Vermont until 1791, after that state's admission to the Union as the 14th state on March 4 of that year. There was some doubt surrounding the numbers, President George Washington and Thomas Jefferson maintained the population was undercounted; the potential reasons Washington and Jefferson may have thought this could be refusal to participate, poor public transportation and roads, spread out population, restraints of current technology.
No microdata from the 1790 population census is available, but aggregate data for small areas and their compatible cartographic boundary files, can be downloaded from the National Historical Geographic Information System. In 1800 and 1810, the age question regarding free white males was more detailed; the 1820
A county seat is an administrative center, seat of government, or capital city of a county or civil parish. The term is used in Canada, Romania and the United States. County towns have a similar function in the United Kingdom and Republic of Ireland, in Jamaica. In most of the United States, counties are the political subdivisions of a state; the city, town, or populated place that houses county government is known as the seat of its respective county. The county legislature, county courthouse, sheriff's department headquarters, hall of records and correctional facility are located in the county seat though some functions may be located or conducted in other parts of the county if it is geographically large. A county seat is but not always, an incorporated municipality; the exceptions include the county seats of counties that have no incorporated municipalities within their borders, such as Arlington County, Virginia. Ellicott City, the county seat of Howard County, is the largest unincorporated county seat in the United States, followed by Towson, the county seat of Baltimore County, Maryland.
Some county seats may not be incorporated in their own right, but are located within incorporated municipalities. For example, Cape May Court House, New Jersey, though unincorporated, is a section of Middle Township, an incorporated municipality. In some of the colonial states, county seats include or included "Court House" as part of their name. In the Canadian provinces of Prince Edward Island, New Brunswick, Nova Scotia, the term "shire town" is used in place of county seat. County seats in Taiwan are the administrative centers of the counties. There are 13 county seats in Taiwan, which are in the forms of county-administered city, urban township or rural township. Most counties have only one county seat. However, some counties in Alabama, Georgia, Kentucky, Mississippi, New Hampshire, New York, Vermont have two or more county seats located on opposite sides of the county. An example is Harrison County, which lists both Biloxi and Gulfport as county seats; the practice of multiple county seat towns dates from the days.
There have been few efforts to eliminate the two-seat arrangement, since a county seat is a source of pride for the towns involved. There are 36 counties with multiple county seats in 11 states: Coffee County, Alabama St. Clair County, Alabama Arkansas County, Arkansas Carroll County, Arkansas Clay County, Arkansas Craighead County, Arkansas Franklin County, Arkansas Logan County, Arkansas Mississippi County, Arkansas Prairie County, Arkansas Sebastian County, Arkansas Yell County, Arkansas Columbia County, Georgia Lee County, Iowa Campbell County, Kentucky Kenton County, Kentucky Essex County, Massachusetts Middlesex County, Massachusetts Plymouth County, Massachusetts Bolivar County, Mississippi Carroll County, Mississippi Chickasaw County, Mississippi Harrison County, Mississippi Hinds County, Mississippi Jasper County, Mississippi Jones County, Mississippi Panola County, Mississippi Tallahatchie County, Mississippi Yalobusha County, Mississippi Jackson County, Missouri Hillsborough County, New Hampshire Seneca County, New York Bennington County, Vermont In New England, the town, not the county, is the primary division of local government.
Counties in this region have served as dividing lines for the states' judicial systems. Connecticut and Rhode Island have no county level of thus no county seats. In Vermont and Maine the county seats are designated shire towns. County government consists only of a Superior Court and Sheriff, both located in the respective shire town. Bennington County has two shire towns. In Massachusetts, most government functions which would otherwise be performed by county governments in other states are performed by town or city governments; as such, Massachusetts has dissolved many of its county governments, the state government now operates the registries of deeds and sheriff's offices in those counties. In Virginia, a county seat may be an independent city surrounded by, but not part of, the county of which it is the administrative center. Two counties in South Dakota have their county seat and government services centered in a neighboring county, their county-level services are provided by Fall River Tripp County, respectively.
In Louisiana, divided into parishes rather than counties, county seats are referred to as parish seats. Alaska is divided into boroughs rather than counties; the Unorganized Borough, which covers 49 % of Alaska's area, has equivalent. The state with the most counties is Texas, with 254, the state with the fewest counties is Delaware, with 3. County seat war Administrative center County town, administrative centres in Ireland and the UK Chef-lieu, administrative centres in Algeria, Luxembourg, France and Tunisia Municipality, equivalent to county in many c
Population density is a measurement of population per unit area or unit volume. It is applied to living organisms, most of the time to humans, it is a key geographical term. In simple terms population density refers to the number of people living in an area per kilometer square. Population density is population divided by total land water volume, as appropriate. Low densities may lead to further reduced fertility; this is called the Allee effect after the scientist. Examples of the causes in low population densities include: Increased problems with locating sexual mates Increased inbreeding For humans, population density is the number of people per unit of area quoted per square kilometer or square mile; this may be calculated for a county, country, another territory or the entire world. The world's population is around 7,500,000,000 and Earth's total area is 510,000,000 square kilometers. Therefore, the worldwide human population density is around 7,500,000,000 ÷ 510,000,000 = 14.7 per km2. If only the Earth's land area of 150,000,000 km2 is taken into account human population density is 50 per km2.
This includes all continental and island land area, including Antarctica. If Antarctica is excluded population density rises to over 55 people per km2. However, over half of the Earth's land mass consists of areas inhospitable to human habitation, such as deserts and high mountains, population tends to cluster around seaports and fresh-water sources. Thus, this number by itself does not give any helpful measurement of human population density. Several of the most densely populated territories in the world are city-states and dependencies; these territories have a small area and a high urbanization level, with an economically specialized city population drawing on rural resources outside the area, illustrating the difference between high population density and overpopulation The potential to maintain the agricultural aspects of deserts is limited as there is not enough precipitation to support a sustainable land. The population in these areas are low. Therefore, cities in the Middle East, such as Dubai, have been increasing in population and infrastructure growth at a fast pace.
Cities with high population densities are, by some, considered to be overpopulated, though this will depend on factors like quality of housing and infrastructure and access to resources. Most of the most densely populated cities are in Southeast Asia, though Cairo and Lagos in Africa fall into this category. City population and area are, however dependent on the definition of "urban area" used: densities are invariably higher for the central city area than when suburban settlements and the intervening rural areas are included, as in the areas of agglomeration or metropolitan area, the latter sometimes including neighboring cities. For instance, Milwaukee has a greater population density when just the inner city is measured, the surrounding suburbs excluded. In comparison, based on a world population of seven billion, the world's inhabitants, as a loose crowd taking up ten square feet per person, would occupy a space a little larger than Delaware's land area; the Gaza Strip has a population density of 5,046 pop/km.
Although arithmetic density is the most common way of measuring population density, several other methods have been developed to provide a more accurate measure of population density over a specific area. Arithmetic density: The total number of people / area of land Physiological density: The total population / area of arable land Agricultural density: The total rural population / area of arable land Residential density: The number of people living in an urban area / area of residential land Urban density: The number of people inhabiting an urban area / total area of urban land Ecological optimum: The density of population that can be supported by the natural resources Demography Human geography Idealized population Optimum population Population genetics Population health Population momentum Population pyramid Rural transport problem Small population size Distance sampling List of population concern organizations List of countries by population density List of cities by population density List of city districts by population density List of English districts by population density List of European cities proper by population density List of United States cities by population density List of islands by population density List of U.
S. states by population density List of Australian suburbs by population density Selected Current and Historic City, Ward & Neighborhood Density Duncan Smith / UCL Centre for Advanced Spatial Analysis. "World Population Density". Exploratory map shows data from the Global Human Settlement Layer produced by the European Commission JRC and the CIESIN Columbia University
A ZIP Code is a postal code used by the United States Postal Service in a system it introduced in 1963. The term ZIP is an acronym for Zone Improvement Plan; the basic format consists of five digits. An extended ZIP+4 code was introduced in 1983 which includes the five digits of the ZIP Code, followed by a hyphen and four additional digits that reference a more specific location; the term ZIP Code was registered as a servicemark by the U. S. Postal Service, but its registration has since expired; the early history and context of postal codes began with postal district/zone numbers. The United States Post Office Department implemented postal zones for numerous large cities in 1943. For example: The "16" was the number of the postal zone in the specific city. By the early 1960s, a more organized system was needed, non-mandatory five-digit ZIP Codes were introduced nationwide on July 1, 1963; the USPOD issued its Publication 59: Abbreviations for Use with ZIP Code on October 1, 1963, with the list of two-letter state abbreviations which are written with both letters capitalized.
An earlier list in June had proposed capitalized abbreviations ranging from two to five letters. According to Publication 59, the two-letter standard was "based on a maximum 23-position line, because this has been found to be the most universally acceptable line capacity basis for major addressing systems", which would be exceeded by a long city name combined with a multi-letter state abbreviation, such as "Sacramento, Calif." along with the ZIP Code. The abbreviations have remained unchanged, with the exception of Nebraska, changed from NB to NE in 1969 at the request of the Canadian postal administration, to avoid confusion with the Canadian province of New Brunswick. Robert Moon is considered the father of the ZIP Code; the post office only credits Moon with the first three digits of the ZIP Code, which describe the sectional center facility or "sec center." An SCF is a central mail processing facility with those three digits. The fourth and fifth digits, which give a more precise locale within the SCF, were proposed by Henry Bentley Hahn Sr.
The SCF sorts mail to all post offices with those first three digits in their ZIP Codes. The mail is sorted according to the final two digits of the ZIP Code and sent to the corresponding post offices in the early morning. Sectional centers do not deliver mail and are not open to the public, most of their employees work the night shift. Mail picked up at post offices is sent to their own SCF in the afternoon, where the mail is sorted overnight. In the case of large cities, the last two digits coincide with the older postal zone number thus: In 1967, these became mandatory for second- and third-class bulk mailers, the system was soon adopted generally; the United States Post Office used a cartoon character, which it called Mr. ZIP, to promote the use of the ZIP Code, he was depicted with a legend such as "USE ZIP CODE" in the selvage of panes of postage stamps or on the covers of booklet panes of stamps. In 1971 Elmira Star-Gazette reporter Dick Baumbach found out the White House was not using a ZIP Code on its envelopes.
Herb Klein, special assistant to President Nixon, responded by saying the next printing of envelopes would include the ZIP Code. In 1983, the U. S. Postal Service introduced an expanded ZIP Code system that it called ZIP+4 called "plus-four codes", "add-on codes", or "add-ons". A ZIP+4 Code uses the basic five-digit code plus four additional digits to identify a geographic segment within the five-digit delivery area, such as a city block, a group of apartments, an individual high-volume receiver of mail, a post office box, or any other unit that could use an extra identifier to aid in efficient mail sorting and delivery. However, initial attempts to promote universal use of the new format met with public resistance and today the plus-four code is not required. In general, mail is read by a multiline optical character reader that instantly determines the correct ZIP+4 Code from the address—along with the more specific delivery point—and sprays an Intelligent Mail barcode on the face of the mail piece that corresponds to 11 digits—nine for the ZIP+4 Code and two for the delivery point.
For Post Office Boxes, the general rule is. The add-on code is one of the following: the last four digits of the box number, zero plus the last three digits of the box number, or, if the box number consists of fewer than four digits, enough zeros are attached to the front of the box number to produce a four-digit number. However, there is no uniform rule, so the ZIP+4 Code must be looked up individually for each box; the ZIP Code is translated into an Intelligent Mail barcode, printed on the mailpiece to make it easier for automated machines to sort. A barcode can be printed by the sender, it is better to let the post office put one on. In general, the post office uses OCR technology, though in some cases a human might have to read and enter the address. Customers who send bulk mail can get a discount on postage if they have printed the barcode themselves and have presorted the mai
United States Census Bureau
The United States Census Bureau is a principal agency of the U. S. Federal Statistical System, responsible for producing data about the American people and economy; the Census Bureau is part of the U. S. Department of Commerce and its director is appointed by the President of the United States; the Census Bureau's primary mission is conducting the U. S. Census every ten years, which allocates the seats of the U. S. House of Representatives to the states based on their population; the Bureau's various censuses and surveys help allocate over $400 billion in federal funds every year and it helps states, local communities, businesses make informed decisions. The information provided by the census informs decisions on where to build and maintain schools, transportation infrastructure, police and fire departments. In addition to the decennial census, the Census Bureau continually conducts dozens of other censuses and surveys, including the American Community Survey, the U. S. Economic Census, the Current Population Survey.
Furthermore and foreign trade indicators released by the federal government contain data produced by the Census Bureau. Article One of the United States Constitution directs the population be enumerated at least once every ten years and the resulting counts used to set the number of members from each state in the House of Representatives and, by extension, in the Electoral College; the Census Bureau now conducts a full population count every 10 years in years ending with a zero and uses the term "decennial" to describe the operation. Between censuses, the Census Bureau makes population projections. In addition, Census data directly affects how more than $400 billion per year in federal and state funding is allocated to communities for neighborhood improvements, public health, education and more; the Census Bureau is mandated with fulfilling these obligations: the collecting of statistics about the nation, its people, economy. The Census Bureau's legal authority is codified in Title 13 of the United States Code.
The Census Bureau conducts surveys on behalf of various federal government and local government agencies on topics such as employment, health, consumer expenditures, housing. Within the bureau, these are known as "demographic surveys" and are conducted perpetually between and during decennial population counts; the Census Bureau conducts economic surveys of manufacturing, retail and other establishments and of domestic governments. Between 1790 and 1840, the census was taken by marshals of the judicial districts; the Census Act of 1840 established a central office. Several acts followed that revised and authorized new censuses at the 10-year intervals. In 1902, the temporary Census Office was moved under the Department of Interior, in 1903 it was renamed the Census Bureau under the new Department of Commerce and Labor; the department was intended to consolidate overlapping statistical agencies, but Census Bureau officials were hindered by their subordinate role in the department. An act in 1920 changed the date and authorized manufacturing censuses every two years and agriculture censuses every 10 years.
In 1929, a bill was passed mandating the House of Representatives be reapportioned based on the results of the 1930 Census. In 1954, various acts were codified into Title 13 of the US Code. By law, the Census Bureau must count everyone and submit state population totals to the U. S. President by December 31 of any year ending in a zero. States within the Union receive the results in the spring of the following year; the United States Census Bureau defines four statistical regions, with nine divisions. The Census Bureau regions are "widely used...for data collection and analysis". The Census Bureau definition is pervasive. Regional divisions used by the United States Census Bureau: Region 1: Northeast Division 1: New England Division 2: Mid-Atlantic Region 2: Midwest Division 3: East North Central Division 4: West North Central Region 3: South Division 5: South Atlantic Division 6: East South Central Division 7: West South Central Region 4: West Division 8: Mountain Division 9: Pacific Many federal, state and tribal governments use census data to: Decide the location of new housing and public facilities, Examine the demographic characteristics of communities and the US, Plan transportation systems and roadways, Determine quotas and creation of police and fire precincts, Create localized areas for elections, utilities, etc.
Gathers population information every 10 years The United States Census Bureau is committed to confidentiality, guarantees non-disclosure of any addresses or personal information related to individuals or establishments. Title 13 of the U. S. Code establishes penalties for the disclosure of this information. All Census employees must sign an affidavit of non-disclosure prior to employment; the Bureau cannot share responses, addresses or personal information with anyone including United States or foreign government