A record producer or music producer oversees and manages the sound recording and production of a band or performer's music, which may range from recording one song to recording a lengthy concept album. A producer has varying roles during the recording process, they may gather musical ideas for the project, collaborate with the artists to select cover tunes or original songs by the artist/group, work with artists and help them to improve their songs, lyrics or arrangements. A producer may also: Select session musicians to play rhythm section accompaniment parts or solos Co-write Propose changes to the song arrangements Coach the singers and musicians in the studioThe producer supervises the entire process from preproduction, through to the sound recording and mixing stages, and, in some cases, all the way to the audio mastering stage; the producer may perform these roles themselves, or help select the engineer, provide suggestions to the engineer. The producer may pay session musicians and engineers and ensure that the entire project is completed within the record label's budget.
A record producer or music producer has a broad role in overseeing and managing the recording and production of a band or performer's music. A producer has many roles that may include, but are not limited to, gathering ideas for the project, composing the music for the project, selecting songs or session musicians, proposing changes to the song arrangements, coaching the artist and musicians in the studio, controlling the recording sessions, supervising the entire process through audio mixing and, in some cases, to the audio mastering stage. Producers often take on a wider entrepreneurial role, with responsibility for the budget, schedules and negotiations. Writer Chris Deville explains it, "Sometimes a producer functions like a creative consultant — someone who helps a band achieve a certain aesthetic, or who comes up with the perfect violin part to complement the vocal melody, or who insists that a chorus should be a bridge. Other times a producer will build a complete piece of music from the ground up and present the finished product to a vocalist, like Metro Boomin supplying Future with readymade beats or Jack Antonoff letting Taylor Swift add lyrics and melody to an otherwise-finished “Out Of The Woods.”The artist of an album may not be a record producer or music producer for his/her album.
While both contribute creatively, the official credit of "record producer" may depend on the record contract. Christina Aguilera, for example, did not receive record producer credits until many albums into her career. In the 2010s, the producer role is sometimes divided among up to three different individuals: executive producer, vocal producer and music producer. An executive producer oversees project finances, a vocal producers oversees the vocal production, a music producer oversees the creative process of recording and mixings; the music producer is often a competent arranger, musician or songwriter who can bring fresh ideas to a project. As well as making any songwriting and arrangement adjustments, the producer selects and/or collaborates with the mixing engineer, who takes the raw recorded tracks and edits and modifies them with hardware and software tools to create a stereo or surround sound "mix" of all the individual voices sounds and instruments, in turn given further adjustment by a mastering engineer for the various distribution media.
The producer oversees the recording engineer who concentrates on the technical aspects of recording. Noted producer Phil Ek described his role as "the person who creatively guides or directs the process of making a record", like a director would a movie. Indeed, in Bollywood music, the designation is music director; the music producer's job is to create and mold a piece of music. The scope of responsibility may be one or two songs or an artist's entire album – in which case the producer will develop an overall vision for the album and how the various songs may interrelate. At the beginning of record industry, the producer role was technically limited to record, in one shot, artists performing live; the immediate predecessors to record producers were the artists and repertoire executives of the late 1920s and 1930s who oversaw the "pop" product and led session orchestras. That was the case of Ben Selvin at Columbia Records, Nathaniel Shilkret at Victor Records and Bob Haring at Brunswick Records.
By the end of the 1930s, the first professional recording studios not owned by the major companies were established separating the roles of A&R man and producer, although it wouldn't be until the late 1940s when the term "producer" became used in the industry. The role of producers changed progressively over the 1960s due to technology; the development of multitrack recording caused a major change in the recording process. Before multitracking, all the elements of a song had to be performed simultaneously. All of these singers and musicians had to be assembled in a large studio where the performance was recorded. With multitrack recording, the "bed tracks" (rhythm section accompaniment parts such as the bassline and rhythm guitar could be recorded first, the vocals and solos could be added using as many "takes" as necessary, it was no longer necessary to get all the players in the studio at the same time. A pop band could record their backing tracks one week, a horn section could be brought in a week to add horn shots and punches, a string section could be brought in a week after that.
Multitrack recording had another pro
In the music industry, a single is a type of release a song recording of fewer tracks than an LP record or an album. This can be released for sale to the public in a variety of different formats. In most cases, a single is a song, released separately from an album, although it also appears on an album; these are the songs from albums that are released separately for promotional uses such as digital download or commercial radio airplay and are expected to be the most popular. In other cases a recording released. Despite being referred to as a single, singles can include up to as many as three tracks; the biggest digital music distributor, iTunes Store, accepts as many as three tracks less than ten minutes each as a single, as does popular music player Spotify. Any more than three tracks on a musical release or thirty minutes in total running time is either an extended play or, if over six tracks long, an album; when mainstream music was purchased via vinyl records, singles would be released double-sided.
That is to say, they were released with an A-side and B-side, on which two singles would be released, one on each side. Moreover, only the most popular songs from a released album would be released as a single. In more contemporary forms of music consumption, artists release most, if not all, of the tracks on an album as singles; the basic specifications of the music single were set in the late 19th century, when the gramophone record began to supersede phonograph cylinders in commercially produced musical recordings. Gramophone discs were manufactured in several sizes. By about 1910, the 10-inch, 78 rpm shellac disc had become the most used format; the inherent technical limitations of the gramophone disc defined the standard format for commercial recordings in the early 20th century. The crude disc-cutting techniques of the time and the thickness of the needles used on record players limited the number of grooves per inch that could be inscribed on the disc surface, a high rotation speed was necessary to achieve acceptable recording and playback fidelity.
78 rpm was chosen as the standard because of the introduction of the electrically powered, synchronous turntable motor in 1925, which ran at 3600 rpm with a 46:1 gear ratio, resulting in a rotation speed of 78.26 rpm. With these factors applied to the 10-inch format and performers tailored their output to fit the new medium; the 3-minute single remained the standard into the 1960s, when the availability of microgroove recording and improved mastering techniques enabled recording artists to increase the duration of their recorded songs. The breakthrough came with Bob Dylan's "Like a Rolling Stone". Although CBS tried to make the record more "radio friendly" by cutting the performance into halves, separating them between the two sides of the vinyl disc, both Dylan and his fans demanded that the full six-minute take be placed on one side, that radio stations play the song in its entirety; as digital downloading and audio streaming have become more prevalent, it has become possible for every track on an album to be available separately.
The concept of a single for an album has been retained as an identification of a more promoted or more popular song within an album collection. The demand for music downloads skyrocketed after the launch of Apple's iTunes Store in January 2001 and the creation of portable music and digital audio players such as the iPod. In September 1997, with the release of Duran Duran's "Electric Barbarella" for paid downloads, Capitol Records became the first major label to sell a digital single from a well-known artist. Geffen Records released Aerosmith's "Head First" digitally for free. In 2004, Recording Industry Association of America introduced digital single certification due to significant sales of digital formats, with Gwen Stefani's "Hollaback Girl" becoming RIAA's first platinum digital single. In 2013, RIAA incorporated on-demand streams into the digital single certification. Single sales in the United Kingdom reached an all-time low in January 2005, as the popularity of the compact disc was overtaken by the then-unofficial medium of the music download.
Recognizing this, On 17 April 2005, Official UK Singles Chart added the download format to the existing format of physical CD singles. Gnarls Barkley was the first act to reach No.1 on this chart through downloads alone in April 2006, for their debut single "Crazy", released physically the following week. On 1 January 2007 digital downloads became eligible from the point of release, without the need for an accompanying physical. Sales improved in the following years, reaching a record high in 2008 that still proceeded to be overtaken in 2009, 2010 and 2011. Singles have been issued in various formats, including 7-inch, 10-inch, 12-inch vinyl discs. Other, less common, formats include singles on Digital Compact Cassette, DVD, LD, as well as many non-standard sizes of vinyl disc; the most common form of the vinyl single is the 45 or 7-inch. The names are derived from its play speed, 45 rpm, the standard diameter, 7 inches; the 7-inch 45 rpm record was released 31 March 1949 by RCA Victor as a smaller, more durable and higher-fidelity replacement for the 78 rpm shellac discs.
The first 45
A drum kit — called a drum set, trap set, or drums — is a collection of drums and other percussion instruments cymbals, which are set up on stands to be played by a single player, with drumsticks held in both hands, the feet operating pedals that control the hi-hat cymbal and the beater for the bass drum. A drum kit consists of a mix of drums and idiophones – most cymbals, but can include the woodblock and cowbell. In the 2000s, some kits include electronic instruments. Both hybrid and electronic kits are used. A standard modern kit, as used in popular music and taught in music schools, contains: A snare drum, mounted on a stand, placed between the player's knees and played with drum sticks A bass drum, played by a pedal operated by the right foot, which moves a felt-covered beater One or more toms, played with sticks or brushes A hi-hat, played with the sticks and closed with left foot pedal One or more cymbals, mounted on stands, played with the sticksAll of these are classified as non-pitched percussion, allowing the music to be scored using percussion notation, for which a loose semi-standardized form exists for both the drum kit and electronic drums.
The drum kit is played while seated on a stool known as a throne. While many instruments like the guitar or piano are capable of performing melodies and chords, most drum kits are unable to achieve this as they produce sounds of indeterminate pitch; the drum kit is a part of the standard rhythm section, used in many types of popular and traditional music styles, ranging from rock and pop to blues and jazz. Other standard instruments used in the rhythm section include the piano, electric guitar, electric bass, keyboards. Many drummers extend their kits from this basic configuration, adding more drums, more cymbals, many other instruments including pitched percussion. In some styles of music, particular extensions are normal. For example, some rock and heavy metal drummers make use of double bass drums, which can be achieved with either a second bass drum or a remote double foot pedal; some progressive drummers may include orchestral percussion such as gongs and tubular bells in their rig. Some performers, such as some rockabilly drummers, play small kits that omit elements from the basic setup.
Before the development of the drum set and cymbals used in military and orchestral music settings were played separately by different percussionists. In the 1840s, percussionists began to experiment with foot pedals as a way to enable them to play more than one instrument, but these devices would not be mass-produced for another 75 years. By the 1860s, percussionists started combining multiple drums into a set; the bass drum, snare drum and other percussion instruments were all struck with hand-held drum sticks. Drummers in musical theater shows and stage shows, where the budget for pit orchestras was limited, contributed to the creation of the drum set by developing techniques and devices that would enable them to cover the roles of multiple percussionists. Double-drumming was developed to enable one person to play the bass and snare with sticks, while the cymbals could be played by tapping the foot on a "low-boy". With this approach, the bass drum was played on beats one and three. While the music was first designed to accompany marching soldiers, this simple and straightforward drumming approach led to the birth of ragtime music when the simplistic marching beats became more syncopated.
This resulted in dance feel. The drum set was referred to as a "trap set", from the late 1800s to the 1930s, drummers were referred to as "trap drummers". By the 1870s, drummers were using an "overhang pedal". Most drummers in the 1870s preferred to do double drumming without any pedal to play multiple drums, rather than use an overhang pedal. Companies patented their pedal systems such as Dee Dee Chandler of New Orleans 1904–05. Liberating the hands for the first time, this evolution saw the bass drum played with the foot of a standing percussionist; the bass drum became the central piece around which every other percussion instrument would revolve. William F. Ludwig, Sr. and his brother, Theobald Ludwig, founded the Ludwig & Ludwig Co. in 1909 and patented the first commercially successful bass drum pedal system, paving the way for the modern drum kit. Wire brushes for use with drums and cymbals were introduced in 1912; the need for brushes arose due to the problem of the drum sound overshadowing the other instruments on stage.
Drummers began using metal fly swatters to reduce the volume on stage next to the other acoustic instruments. Drummers could still play the rudimentary snare figures and grooves with brushes that they would play with drumsticks. By World War I, drum kits were marching band-style military bass drums with many percussion items suspended on and around them. Drum kits became a central part of jazz Dixieland; the modern drum kit was developed in the vaudeville era during the 1920s in New Orleans. In 1917, a New Orleans band called "The Original Dixieland Jazz Band " recorded jazz tunes that became hits all o
Singing is the act of producing musical sounds with the voice and augments regular speech by the use of sustained tonality, a variety of vocal techniques. A person who sings is called a vocalist. Singers perform music that can be sung without accompaniment by musical instruments. Singing is done in an ensemble of musicians, such as a choir of singers or a band of instrumentalists. Singers may perform as soloists or accompanied by anything from a single instrument up to a symphony orchestra or big band. Different singing styles include art music such as opera and Chinese opera, Indian music and religious music styles such as gospel, traditional music styles, world music, blues and popular music styles such as pop, electronic dance music and filmi. Singing arranged or improvised, it may be done as a form of religious devotion, as a hobby, as a source of pleasure, comfort or ritual, as part of music education or as a profession. Excellence in singing requires time, dedication and regular practice.
If practice is done on a regular basis the sounds can become more clear and strong. Professional singers build their careers around one specific musical genre, such as classical or rock, although there are singers with crossover success, they take voice training provided by voice teachers or vocal coaches throughout their careers. In its physical aspect, singing has a well-defined technique that depends on the use of the lungs, which act as an air supply or bellows. Though these four mechanisms function independently, they are coordinated in the establishment of a vocal technique and are made to interact upon one another. During passive breathing, air is inhaled with the diaphragm while exhalation occurs without any effort. Exhalation may be aided by lower pelvis/pelvic muscles. Inhalation is aided by use of external intercostals and sternocleidomastoid muscles; the pitch is altered with the vocal cords. With the lips closed, this is called humming; the sound of each individual's singing voice is unique not only because of the actual shape and size of an individual's vocal cords but due to the size and shape of the rest of that person's body.
Humans have vocal folds which can loosen, tighten, or change their thickness, over which breath can be transferred at varying pressures. The shape of the chest and neck, the position of the tongue, the tightness of otherwise unrelated muscles can be altered. Any one of these actions results in a change in pitch, timbre, or tone of the sound produced. Sound resonates within different parts of the body and an individual's size and bone structure can affect the sound produced by an individual. Singers can learn to project sound in certain ways so that it resonates better within their vocal tract; this is known as vocal resonation. Another major influence on vocal sound and production is the function of the larynx which people can manipulate in different ways to produce different sounds; these different kinds of laryngeal function are described as different kinds of vocal registers. The primary method for singers to accomplish this is through the use of the Singer's Formant, it has been shown that a more powerful voice may be achieved with a fatter and fluid-like vocal fold mucosa.
The more pliable the mucosa, the more efficient the transfer of energy from the airflow to the vocal folds. Vocal registration refers to the system of vocal registers within the voice. A register in the voice is a particular series of tones, produced in the same vibratory pattern of the vocal folds, possessing the same quality. Registers originate in laryngeal function, they occur. Each of these vibratory patterns appears within a particular range of pitches and produces certain characteristic sounds; the occurrence of registers has been attributed to effects of the acoustic interaction between the vocal fold oscillation and the vocal tract. The term "register" can be somewhat confusing; the term register can be used to refer to any of the following: A particular part of the vocal range such as the upper, middle, or lower registers. A resonance area such as chest voice or head voice. A phonatory process A certain vocal timbre or vocal "color" A region of the voice, defined or delimited by vocal breaks.
In linguistics, a register language is a language which combines tone and vowel phonation into a single phonological system. Within speech pathology, the term vocal register has three constituent elements: a certain vibratory pattern of the vocal folds, a certain series of pitches, a certain type of sound. Speech pathologists identify four vocal registers based on the physiology of laryngeal function: the vocal fry register, the modal register, the falsetto register, the whistle register; this view is adopted by many vocal pedagogues. Vocal resonation is the process by which the basic product of phonation is en
Birdbrain is the second album by American alternative rock band Buffalo Tom, released in 1990. Dinosaur Jr mastermind J Mascis once again assisted alongside Sean Slade. Buffalo Tom singer/guitarist Bill Janovitz said that Mascis' influence accented the band's edgier side; the CD version includes a cover of The Psychedelic Furs' "Heaven" as well as a live acoustic version of "Reason Why", a song from Buffalo Tom's self-titled debut album. All songs by Buffalo Tom except where noted "Birdbrain" "Skeleton Key" "Caress" "Guy Who is Me" "Enemy" "Crawl" "Fortune Teller" "Baby" "Directive" "Bleeding Heart" "Heaven" "Reason Why" Bill Janovitz - vocals, guitar Chris Colbourn - bass Tom Maginnis - drums Sean Slade - guitar on "Bleeding Heart", backing vocals on "Crawl" Monte Rose - guitar on "Birdbrain" Scans of the CD, cover and booklet at discogs.com
The guitar is a fretted musical instrument that has six strings. It is played with both hands by strumming or plucking the strings with either a guitar pick or the finger/fingernails of one hand, while fretting with the fingers of the other hand; the sound of the vibrating strings is projected either acoustically, by means of the hollow chamber of the guitar, or through an electrical amplifier and a speaker. The guitar is a type of chordophone, traditionally constructed from wood and strung with either gut, nylon or steel strings and distinguished from other chordophones by its construction and tuning; the modern guitar was preceded by the gittern, the vihuela, the four-course Renaissance guitar, the five-course baroque guitar, all of which contributed to the development of the modern six-string instrument. There are three main types of modern acoustic guitar: the classical guitar, the steel-string acoustic guitar, the archtop guitar, sometimes called a "jazz guitar"; the tone of an acoustic guitar is produced by the strings' vibration, amplified by the hollow body of the guitar, which acts as a resonating chamber.
The classical guitar is played as a solo instrument using a comprehensive finger-picking technique where each string is plucked individually by the player's fingers, as opposed to being strummed. The term "finger-picking" can refer to a specific tradition of folk, blues and country guitar playing in the United States; the acoustic bass guitar is a low-pitched instrument, one octave below a regular guitar. Electric guitars, introduced in the 1930s, use an amplifier and a loudspeaker that both makes the sound of the instrument loud enough for the performers and audience to hear, given that it produces an electric signal when played, that can electronically manipulate and shape the tone using an equalizer and a huge variety of electronic effects units, the most used ones being distortion and reverb. Early amplified guitars employed a hollow body, but solid wood guitars began to dominate during the 1960s and 1970s, as they are less prone to unwanted acoustic feedback "howls"; as with acoustic guitars, there are a number of types of electric guitars, including hollowbody guitars, archtop guitars and solid-body guitars, which are used in rock music.
The loud, amplified sound and sonic power of the electric guitar played through a guitar amp has played a key role in the development of blues and rock music, both as an accompaniment instrument and performing guitar solos, in many rock subgenres, notably heavy metal music and punk rock. The electric guitar has had a major influence on popular culture; the guitar is used in a wide variety of musical genres worldwide. It is recognized as a primary instrument in genres such as blues, country, folk, jota, metal, reggae, rock and many forms of pop. Before the development of the electric guitar and the use of synthetic materials, a guitar was defined as being an instrument having "a long, fretted neck, flat wooden soundboard, a flat back, most with incurved sides." The term is used to refer to a number of chordophones that were developed and used across Europe, beginning in the 12th century and in the Americas. A 3,300-year-old stone carving of a Hittite bard playing a stringed instrument is the oldest iconographic representation of a chordophone and clay plaques from Babylonia show people playing an instrument that has a strong resemblance to the guitar, indicating a possible Babylonian origin for the guitar.
The modern word guitar, its antecedents, has been applied to a wide variety of chordophones since classical times and as such causes confusion. The English word guitar, the German Gitarre, the French guitare were all adopted from the Spanish guitarra, which comes from the Andalusian Arabic قيثارة and the Latin cithara, which in turn came from the Ancient Greek κιθάρα. Which comes from the Persian word "sihtar"; this pattern of naming is visible in setar and sitar. The word "tar" at the end of all of these words is a Persian word that means "string". Many influences are cited as antecedents to the modern guitar. Although the development of the earliest "guitars" is lost in the history of medieval Spain, two instruments are cited as their most influential predecessors, the European lute and its cousin, the four-string oud. At least two instruments called "guitars" were in use in Spain by 1200: the guitarra latina and the so-called guitarra morisca; the guitarra morisca had a rounded back, wide fingerboard, several sound holes.
The guitarra Latina had a narrower neck. By the 14th century the qualifiers "moresca" or "morisca" and "latina" had been dropped, these two cordophones were referred to as guitars; the Spanish vihuela, called in Italian the "viola da mano", a guitar-like instrument of the 15th and 16th centuries, is considered to have been the single most important influence in the development of the baroque guitar. It had six courses, lute-like tuning in fourths and a guitar-like body, although early representations reveal an instrument with a cut waist, it was larger than the contemporary four-course guitars. By the 16th century, the vihuela's construction had more in common with the modern guitar, with its curved one-piece ribs, than with the viols, more like a larger version of the contemporary four-course guita