List of laser types

From Wikipedia, the free encyclopedia
Jump to: navigation, search
An immense slab of "continuous melt" processed neodymium doped laser glass for use on the National Ignition Facility.

This is a list of laser types, their operational wavelengths, and their applications. Thousands of kinds of laser are known, but most of them are used only for specialised research.


Wavelengths of commercially available lasers. Laser types with distinct laser lines are shown above the wavelength bar, while below are shown lasers that can emit in a wavelength range. The height of the lines and bars gives an indication of the maximal power/pulse energy commercially available, while the color codifies the type of laser material (see the figure description for details). Most of the data comes from Weber's book Handbook of laser wavelengths,[1] with newer data in particular for the semiconductor lasers.

Gas lasers[edit]

Laser gain medium and type Operation wavelength(s) Pump source Applications and notes
Helium–neon laser 632.8 nm (543.5 nm, 593.9 nm, 611.8 nm, 1.1523 μm, 1.52 μm, 3.3913 μm) Electrical discharge Interferometry, holography, spectroscopy, barcode scanning, alignment, optical demonstrations.
Argon laser 454.6 nm, 488.0 nm, 514.5 nm (351 nm, 363.8, 457.9 nm, 465.8 nm, 476.5 nm, 472.7 nm, 528.7 nm, also frequency doubled to provide 244 nm, 257 nm) Electrical discharge Retinal phototherapy (for diabetes), lithography, confocal microscopy, spectroscopy pumping other lasers.
Krypton laser 416 nm, 530.9 nm, 568.2 nm, 647.1 nm, 676.4 nm, 752.5 nm, 799.3 nm Electrical discharge Scientific research, mixed with argon to create "white-light" lasers, light shows.
Xenon ion laser Many lines throughout visible spectrum extending into the UV and IR. Electrical discharge Scientific research.
Nitrogen laser 337.1 nm Electrical discharge Pumping of dye lasers, measuring air pollution, scientific research. Nitrogen lasers can operate superradiantly (without a resonator cavity). Amateur laser construction. See TEA laser
Carbon dioxide laser 10.6 μm, (9.4 μm) Transverse (high power) or longitudinal (low power) electrical discharge Material processing (cutting, welding, etc.), surgery, dental laser, military lasers.
Carbon monoxide laser 2.6 to 4 μm, 4.8 to 8.3 μm Electrical discharge Material processing (engraving, welding, etc.), photoacoustic spectroscopy.
Excimer laser 193 nm (ArF), 248 nm (KrF), 308 nm (XeCl), 353 nm (XeF) Excimer recombination via electrical discharge Ultraviolet lithography for semiconductor manufacturing, laser surgery, LASIK.

Chemical lasers[edit]

Used as directed-energy weapons.

Laser gain medium and type Operation wavelength(s) Pump source Applications and notes
Hydrogen fluoride laser 2.7 to 2.9 μm for Hydrogen fluoride (<80% Atmospheric transmittance) Chemical reaction in a burning jet of ethylene and nitrogen trifluoride (NF3) Used in research for laser weaponry, operated in continuous wave mode, can have power in the megawatt range.
Deuterium fluoride laser ~3800 nm (3.6 to 4.2 μm) (~90% Atm. transmittance) chemical reaction US military laser prototypes.
COIL (Chemical oxygeniodine laser) 1.315 μm (<70% Atmospheric transmittance) Chemical reaction in a jet of singlet delta oxygen and iodine Military lasers, scientific and materials research. Can operate in continuous wave mode, with power in the megawatt range.
Agil (All gas-phase iodine laser) 1.315 μm (<70% Atmospheric transmittance) Chemical reaction of chlorine atoms with gaseous hydrazoic acid, resulting in excited molecules of nitrogen chloride, which then pass their energy to the iodine atoms. Scientific, weaponry, aerospace.

Dye lasers[edit]

Laser gain medium and type Operation wavelength(s) Pump source Applications and notes
Dye lasers 390-435 nm (stilbene), 460-515 nm (coumarin 102), 570-640 nm (rhodamine 6G), many others Other laser, flashlamp Research, laser medicine,[2] spectroscopy, birthmark removal, isotope separation. The tuning range of the laser depends on which dye is used.

Metal-vapor lasers[edit]

Laser gain medium and type Operation wavelength(s) Pump source Applications and notes
Heliumcadmium (HeCd) metal-vapor laser 441.563 nm, 325 nm Electrical discharge in metal vapor mixed with helium buffer gas. Printing and typesetting applications, fluorescence excitation examination (i.e. in U.S. paper currency printing), scientific research.
Heliummercury (HeHg) metal-vapor laser 567 nm, 615 nm Rare, scientific research, amateur laser construction.
Heliumselenium (HeSe) metal-vapor laser up to 24 wavelengths between red and UV Rare, scientific research, amateur laser construction.
Heliumsilver (HeAg) metal-vapor laser[3] 224.3 nm Scientific research
Strontium Vapor Laser 430.5 nm Scientific research
Neoncopper (NeCu) metal-vapor laser[3] 248.6 nm Electrical discharge in metal vapor mixed with neon buffer gas. Scientific research
Copper vapor laser 510.6 nm, 578.2 nm Electrical discharge Dermatological uses, high speed photography, pump for dye lasers.
Gold vapor laser 627 nm Rare, dermatological and photodynamic therapy uses.[4]
Manganese (Mn/MnCl2) vapor laser 534.1 nm Pulsed electric discharge Optics Communications. 51 (6): 387. 1987.  Missing or empty |title= (help)

Solid-state lasers[edit]

Laser gain medium and type Operation wavelength(s) Pump source Applications and notes
Ruby laser 694.3 nm Flashlamp Holography, tattoo removal. The first type of visible light laser invented; May 1960.
Nd:YAG laser 1.064 μm, (1.32 μm) Flashlamp, laser diode Material processing, rangefinding, laser target designation, surgery, tattoo removal, hair removal, research, pumping other lasers (combined with frequency doubling to produce a green 532 nm beam). One of the most common high power lasers. Usually pulsed (down to fractions of a nanosecond), dental laser
NdCrYAG laser 1.064 μm, (1.32 μm) solar radiation Experimental production of nanopowders.[5]
Er:YAG laser 2.94 μm Flashlamp, laser diode Periodontal scaling, Dental laser, Skin Resurfacing
Neodymium YLF (Nd:YLF) solid-state laser 1.047 and 1.053 μm Flashlamp, laser diode Mostly used for pulsed pumping of certain types of pulsed Ti:sapphire lasers, combined with frequency doubling.
Neodymium doped Yttrium orthovanadate (Nd:YVO4) laser 1.064 μm laser diode Mostly used for continuous pumping of mode-locked Ti:sapphire or dye lasers, in combination with frequency doubling. Also used pulsed for marking and micromachining. A frequency doubled nd:YVO4 laser is also the normal way of making a green laser pointer.
Neodymium doped yttrium calcium oxoborate Nd:YCa4O(BO3)3 or simply Nd:YCOB ~1.060 μm (~530 nm at second harmonic) laser diode Nd:YCOB is a so-called "self-frequency doubling" or SFD laser material which is both capable of lasing and which has nonlinear characteristics suitable for second harmonic generation. Such materials have the potential to simplify the design of high brightness green lasers.
Neodymium glass (Nd:Glass) laser ~1.062 μm (Silicate glasses), ~1.054 μm (Phosphate glasses) Flashlamp, laser diode Used in extremely high power (terawatt scale), high energy (megajoules) multiple beam systems for inertial confinement fusion. Nd:Glass lasers are usually frequency tripled to the third harmonic at 351 nm in laser fusion devices.
Titanium sapphire (Ti:sapphire) laser 650-1100 nm Other laser Spectroscopy, LIDAR, research. This material is often used in highly-tunable mode-locked infrared lasers to produce ultrashort pulses and in amplifier lasers to produce ultrashort and ultra-intense pulses.
Thulium YAG (Tm:YAG) laser 2.0 μm Laser diode LIDAR.
Ytterbium YAG (Yb:YAG) laser 1.03 μm Laser diode, flashlamp Optical refrigeration, materials processing, ultrashort pulse research, multiphoton microscopy, LIDAR.
Ytterbium:2O3 (glass or ceramics) laser 1.03 μm Laser diode ultrashort pulse research, [6]
Ytterbium doped glass laser (rod, plate/chip, and fiber) 1. μm Laser diode. Fiber version is capable of producing several-kilowatt continuous power, having ~70-80% optical-to-optical and ~25% electrical-to-optical efficiency. Material processing: cutting, welding, marking; nonlinear fiber optics: broadband fiber-nonlinearity based sources, pump for fiber Raman lasers; distributed Raman amplification pump for telecommunications.
Holmium YAG (Ho:YAG) laser 2.1 μm Laser diode Tissue ablation, kidney stone removal, dentistry.
Chromium ZnSe (Cr:ZnSe) laser 2.2 - 2.8 μm Other laser (Tm fiber) MWIR laser radar, countermeasure against heat-seeking missiles etc.
Cerium doped lithium strontium (or calcium) aluminum fluoride (Ce:LiSAF, Ce:LiCAF) ~280 to 316 nm Frequency quadrupled Nd:YAG laser pumped, excimer laser pumped, copper vapor laser pumped. Remote atmospheric sensing, LIDAR, optics research.
Promethium 147 doped phosphate glass (147Pm+3:Glass) solid-state laser 933 nm, 1098 nm  ?? Laser material is radioactive. Once demonstrated in use at LLNL in 1987, room temperature 4 level lasing in 147Pm doped into a lead-indium-phosphate glass étalon.
Chromium doped chrysoberyl (alexandrite) laser Typically tuned in the range of 700 to 820 nm Flashlamp, laser diode, mercury arc (for CW mode operation) Dermatological uses, LIDAR, laser machining.
Erbium doped and erbiumytterbium codoped glass lasers 1.53-1.56 μm Laser diode These are made in rod, plate/chip, and optical fiber form. Erbium doped fibers are commonly used as optical amplifiers for telecommunications.
Trivalent uranium doped calcium fluoride (U:CaF2) solid-state laser 2.5 μm Flashlamp First 4-level solid state laser (November 1960) developed by Peter Sorokin and Mirek Stevenson at IBM research labs, second laser invented overall (after Maiman's ruby laser), liquid helium cooled, unused today. [1]
Divalent samarium doped calcium fluoride (Sm:CaF2) laser 708.5 nm Flashlamp Also invented by Peter Sorokin and Mirek Stevenson at IBM research labs, early 1961. Liquid helium cooled, unused today. [2]
F-Center laser. 2.3-3.3 μm Ion laser Spectroscopy

Semiconductor laser[edit]

Laser gain medium and type Operation wavelength(s) Pump source Applications and notes
Semiconductor laser diode (general information) 0.4-20 μm, depending on active region material. Electrical current Telecommunications, holography, printing, weapons, machining, welding, pump sources for other lasers, high beam headlights for automobiles.[7]
GaN 0.4 μm Optical discs. 405 nm is used in Blu-ray Discs reading/recording.
InGaN 0.4 - 0.5 μm Home projector, primary light source for some recent small projectors
AlGaInP, AlGaAs 0.63-0.9 μm Optical discs, laser pointers, data communications. 780 nm Compact Disc, 650 nm general DVD player and 635 nm DVD for Authoring recorder laser are the most common lasers type in the world. Solid-state laser pumping, machining, medical.
InGaAsP 1.0-2.1 μm Telecommunications, solid-state laser pumping, machining, medical..
lead salt 3-20 μm
Vertical cavity surface emitting laser (VCSEL) 850–1500 nm, depending on material Telecommunications
Quantum cascade laser Mid-infrared to far-infrared. Research, Future applications may include collision-avoidance radar, industrial-process control and medical diagnostics such as breath analyzers.
Hybrid silicon laser Mid-infrared Low cost silicon integrated optical communications

Other types of lasers[edit]

Laser gain medium and type Operation wavelength(s) Pump source Applications and notes
Free electron laser A broad wavelength range (0.1 nm - several mm); a single free electron laser may be tunable over a wavelength range relativistic electron beam Atmospheric research, material science, medical applications.
Gas dynamic laser Several lines around 10.5 μm; other frequencies may be possible with different gas mixtures Spin state population inversion in carbon dioxide molecules caused by supersonic adiabatic expansion of mixture of nitrogen and carbon dioxide Military applications; can operate in CW mode at several megawatts optical power. Manufacturing and Heavy Industry.
"Nickel-like" Samarium laser[8] X-rays at 7.3 nm wavelength Lasing in ultra-hot samarium plasma formed by double pulse terawatt scale irradiation fluences. Sub–10 nm X-ray laser, possible applications in high resolution microscopy and holography.
Raman laser, uses inelastic stimulated Raman scattering in a nonlinear media, mostly fiber, for amplification 1-2 μm for fiber version Other laser, mostly Yb-glass fiber lasers Complete 1-2 μm wavelength coverage; distributed optical signal amplification for telecommunications; optical solitons generation and amplification
Nuclear pumped laser See gas lasers, soft x-ray Nuclear fission: reactor, nuclear bomb Research, weapons program.

See also[edit]


  1. ^ Weber, Marvin J. (1999). Handbook of laser wavelengths. CRC Press. ISBN 0-8493-3508-6. 
  2. ^ Costela, A.; et al. (2009). "Medical applications of dye lasers". In Duarte, F. J. Tunable Laser Applications (2nd ed.). CRC Press. 
  3. ^ a b Storrie-Lombardia, M. C.; et al. (2001). "Hollow cathode ion lasers for deep ultraviolet Raman spectroscopy and fluorescence imaging". Review of Scientific Instruments. 72 (12): 4452. Bibcode:2001RScI...72.4452S. doi:10.1063/1.1369627. 
  4. ^ Goldman, L. (1990). "Dye lasers in medicine". In Duarte, F. J.; Hillman, L. W. Dye Laser Principles. Academic Press. ISBN 978-0-12-222700-4. 
  5. ^ Sh. D. Payziyeva; S. A. Bakhramov; A. K. Kasimov (2011). "Transformation of concentrated sunlight into laser radiation on small parabolic concentrators". Journal of Renewable and Sustainable Energy. 3 (5): 053102. doi:10.1063/1.3643267. 
  6. ^ M. Tokurakawa; K. Takaichi; A. Shirakawa; K. Ueda; H. Yagi; T. Yanagitani; A. A. Kaminskii (2007). "Diode-pumped 188 fs mode-locked Yb3+:Y2O3 ceramic laser". Applied Physics Letters. 90 (7): 071101. Bibcode:2007ApPhL..90g1101T. doi:10.1063/1.2476385. 
  7. ^ BMW, Audi will introduce laser headlamps this year, Automotive News Europe, 7 January 2014, David Sedgwick
  8. ^ J. Zhang*, A. G. MacPhee, J. Lin; et al. (16 May 1997). "A Saturated X-ray Laser Beam at 7 Nanometers". Science. Retrieved 31 October 2013. 

Further references[edit]

  • Silfvast, William T. Laser fundamentals, Cambridge University Press, 2004. ISBN 0-521-83345-0
  • Weber, Marvin J. Handbook of laser wavelengths, CRC Press, 1999. ISBN 0-8493-3508-6