The melting point of a substance is the temperature at which it changes state from solid to liquid. At the melting point the solid and liquid phase exist in equilibrium; the melting point of a substance depends on pressure and is specified at a standard pressure such as 1 atmosphere or 100 kPa. When considered as the temperature of the reverse change from liquid to solid, it is referred to as the freezing point or crystallization point; because of the ability of some substances to supercool, the freezing point is not considered as a characteristic property of a substance. When the "characteristic freezing point" of a substance is determined, in fact the actual methodology is always "the principle of observing the disappearance rather than the formation of ice", that is, the melting point. For most substances and freezing points are equal. For example, the melting point and freezing point of mercury is 234.32 kelvins. However, certain substances possess differing solid-liquid transition temperatures.
For example, agar melts at 85 °C and solidifies from 31 °C. The melting point of ice at 1 atmosphere of pressure is close to 0 °C. In the presence of nucleating substances, the freezing point of water is not always the same as the melting point. In the absence of nucleators water can exist as a supercooled liquid down to −48.3 °C before freezing. The chemical element with the highest melting point is tungsten, at 3,414 °C; the often-cited carbon does not melt at ambient pressure but sublimes at about 3,726.85 °C. Tantalum hafnium carbide is a refractory compound with a high melting point of 4215 K. At the other end of the scale, helium does not freeze at all at normal pressure at temperatures arbitrarily close to absolute zero. Many laboratory techniques exist for the determination of melting points. A Kofler bench is a metal strip with a temperature gradient. Any substance can be placed on a section of the strip, revealing its thermal behaviour at the temperature at that point. Differential scanning calorimetry gives information on melting point together with its enthalpy of fusion.
A basic melting point apparatus for the analysis of crystalline solids consists of an oil bath with a transparent window and a simple magnifier. The several grains of a solid are placed in a thin glass tube and immersed in the oil bath; the oil bath is heated and with the aid of the magnifier melting of the individual crystals at a certain temperature can be observed. In large/small devices, the sample is placed in a heating block, optical detection is automated; the measurement can be made continuously with an operating process. For instance, oil refineries measure the freeze point of diesel fuel online, meaning that the sample is taken from the process and measured automatically; this allows for more frequent measurements as the sample does not have to be manually collected and taken to a remote laboratory. For refractory materials the high melting point may be determined by heating the material in a black body furnace and measuring the black-body temperature with an optical pyrometer. For the highest melting materials, this may require extrapolation by several hundred degrees.
The spectral radiance from an incandescent body is known to be a function of its temperature. An optical pyrometer matches the radiance of a body under study to the radiance of a source, calibrated as a function of temperature. In this way, the measurement of the absolute magnitude of the intensity of radiation is unnecessary. However, known temperatures must be used to determine the calibration of the pyrometer. For temperatures above the calibration range of the source, an extrapolation technique must be employed; this extrapolation is accomplished by using Planck's law of radiation. The constants in this equation are not known with sufficient accuracy, causing errors in the extrapolation to become larger at higher temperatures. However, standard techniques have been developed to perform this extrapolation. Consider the case of using gold as the source. In this technique, the current through the filament of the pyrometer is adjusted until the light intensity of the filament matches that of a black-body at the melting point of gold.
This establishes the primary calibration temperature and can be expressed in terms of current through the pyrometer lamp. With the same current setting, the pyrometer is sighted on another black-body at a higher temperature. An absorbing medium of known transmission is inserted between this black-body; the temperature of the black-body is adjusted until a match exists between its intensity and that of the pyrometer filament. The true higher temperature of the black-body is determined from Planck's Law; the absorbing medium is removed and the current through the filament is adjusted to match the filament intensity to that of the black-body. This establishes a second calibration point for the pyrometer; this step is repeated to carry the calibration to hi
European Chemicals Agency
The European Chemicals Agency is an agency of the European Union which manages the technical and administrative aspects of the implementation of the European Union regulation called Registration, Evaluation and Restriction of Chemicals. ECHA is the driving force among regulatory authorities in implementing the EU's chemicals legislation. ECHA helps companies to comply with the legislation, advances the safe use of chemicals, provides information on chemicals and addresses chemicals of concern, it is located in Finland. The agency headed by Executive Director Bjorn Hansen, started working on 1 June 2007; the REACH Regulation requires companies to provide information on the hazards and safe use of chemical substances that they manufacture or import. Companies register this information with ECHA and it is freely available on their website. So far, thousands of the most hazardous and the most used substances have been registered; the information is technical but gives detail on the impact of each chemical on people and the environment.
This gives European consumers the right to ask retailers whether the goods they buy contain dangerous substances. The Classification and Packaging Regulation introduces a globally harmonised system for classifying and labelling chemicals into the EU; this worldwide system makes it easier for workers and consumers to know the effects of chemicals and how to use products safely because the labels on products are now the same throughout the world. Companies need to notify ECHA of the labelling of their chemicals. So far, ECHA has received over 5 million notifications for more than 100 000 substances; the information is available on their website. Consumers can check chemicals in the products. Biocidal products include, for example, insect disinfectants used in hospitals; the Biocidal Products Regulation ensures that there is enough information about these products so that consumers can use them safely. ECHA is responsible for implementing the regulation; the law on Prior Informed Consent sets guidelines for the import of hazardous chemicals.
Through this mechanism, countries due to receive hazardous chemicals are informed in advance and have the possibility of rejecting their import. Substances that may have serious effects on human health and the environment are identified as Substances of Very High Concern 1; these are substances which cause cancer, mutation or are toxic to reproduction as well as substances which persist in the body or the environment and do not break down. Other substances considered. Companies manufacturing or importing articles containing these substances in a concentration above 0,1% weight of the article, have legal obligations, they are required to inform users about the presence of the substance and therefore how to use it safely. Consumers have the right to ask the retailer whether these substances are present in the products they buy. Once a substance has been identified in the EU as being of high concern, it will be added to a list; this list is available on ECHA's website and shows consumers and industry which chemicals are identified as SVHCs.
Substances placed on the Candidate List can move to another list. This means that, after a given date, companies will not be allowed to place the substance on the market or to use it, unless they have been given prior authorisation to do so by ECHA. One of the main aims of this listing process is to phase out SVHCs where possible. In its 2018 substance evaluation progress report, ECHA said chemical companies failed to provide “important safety information” in nearly three quarters of cases checked that year. "The numbers show a similar picture to previous years" the report said. The agency noted that member states need to develop risk management measures to control unsafe commercial use of chemicals in 71% of the substances checked. Executive Director Bjorn Hansen called non-compliance with REACH a "worry". Industry group CEFIC acknowledged the problem; the European Environmental Bureau called for faster enforcement to minimise chemical exposure. European Chemicals Bureau Official website
Simplified molecular-input line-entry system
The simplified molecular-input line-entry system is a specification in the form of a line notation for describing the structure of chemical species using short ASCII strings. SMILES strings can be imported by most molecule editors for conversion back into two-dimensional drawings or three-dimensional models of the molecules; the original SMILES specification was initiated in the 1980s. It has since been extended. In 2007, an open standard called. Other linear notations include the Wiswesser line notation, ROSDAL, SYBYL Line Notation; the original SMILES specification was initiated by David Weininger at the USEPA Mid-Continent Ecology Division Laboratory in Duluth in the 1980s. Acknowledged for their parts in the early development were "Gilman Veith and Rose Russo and Albert Leo and Corwin Hansch for supporting the work, Arthur Weininger and Jeremy Scofield for assistance in programming the system." The Environmental Protection Agency funded the initial project to develop SMILES. It has since been modified and extended by others, most notably by Daylight Chemical Information Systems.
In 2007, an open standard called "OpenSMILES" was developed by the Blue Obelisk open-source chemistry community. Other'linear' notations include the Wiswesser Line Notation, ROSDAL and SLN. In July 2006, the IUPAC introduced the InChI as a standard for formula representation. SMILES is considered to have the advantage of being more human-readable than InChI; the term SMILES refers to a line notation for encoding molecular structures and specific instances should be called SMILES strings. However, the term SMILES is commonly used to refer to both a single SMILES string and a number of SMILES strings; the terms "canonical" and "isomeric" can lead to some confusion when applied to SMILES. The terms are not mutually exclusive. A number of valid SMILES strings can be written for a molecule. For example, CCO, OCC and CC all specify the structure of ethanol. Algorithms have been developed to generate the same SMILES string for a given molecule; this SMILES is unique for each structure, although dependent on the canonicalization algorithm used to generate it, is termed the canonical SMILES.
These algorithms first convert the SMILES to an internal representation of the molecular structure. Various algorithms for generating canonical SMILES have been developed and include those by Daylight Chemical Information Systems, OpenEye Scientific Software, MEDIT, Chemical Computing Group, MolSoft LLC, the Chemistry Development Kit. A common application of canonical SMILES is indexing and ensuring uniqueness of molecules in a database; the original paper that described the CANGEN algorithm claimed to generate unique SMILES strings for graphs representing molecules, but the algorithm fails for a number of simple cases and cannot be considered a correct method for representing a graph canonically. There is no systematic comparison across commercial software to test if such flaws exist in those packages. SMILES notation allows the specification of configuration at tetrahedral centers, double bond geometry; these are structural features that cannot be specified by connectivity alone and SMILES which encode this information are termed isomeric SMILES.
A notable feature of these rules is. The term isomeric SMILES is applied to SMILES in which isotopes are specified. In terms of a graph-based computational procedure, SMILES is a string obtained by printing the symbol nodes encountered in a depth-first tree traversal of a chemical graph; the chemical graph is first trimmed to remove hydrogen atoms and cycles are broken to turn it into a spanning tree. Where cycles have been broken, numeric suffix labels are included to indicate the connected nodes. Parentheses are used to indicate points of branching on the tree; the resultant SMILES form depends on the choices: of the bonds chosen to break cycles, of the starting atom used for the depth-first traversal, of the order in which branches are listed when encountered. Atoms are represented by the standard abbreviation of the chemical elements, in square brackets, such as for gold. Brackets may be omitted in the common case of atoms which: are in the "organic subset" of B, C, N, O, P, S, F, Cl, Br, or I, have no formal charge, have the number of hydrogens attached implied by the SMILES valence model, are the normal isotopes, are not chiral centers.
All other elements must be enclosed in brackets, have charges and hydrogens shown explicitly. For instance, the SMILES for water may be written as either O or. Hydrogen may be written as a separate atom; when brackets are used, the symbol H is added if the atom in brackets is bonded to one or more hydrogen, followed by the number of hydrogen atoms if greater than 1 by the sign + for a positive charge or by - for a negative charge. For example, for ammonium. If there is more than one charge, it is written as digit.
The density, or more the volumetric mass density, of a substance is its mass per unit volume. The symbol most used for density is ρ, although the Latin letter D can be used. Mathematically, density is defined as mass divided by volume: ρ = m V where ρ is the density, m is the mass, V is the volume. In some cases, density is loosely defined as its weight per unit volume, although this is scientifically inaccurate – this quantity is more called specific weight. For a pure substance the density has the same numerical value as its mass concentration. Different materials have different densities, density may be relevant to buoyancy and packaging. Osmium and iridium are the densest known elements at standard conditions for temperature and pressure but certain chemical compounds may be denser. To simplify comparisons of density across different systems of units, it is sometimes replaced by the dimensionless quantity "relative density" or "specific gravity", i.e. the ratio of the density of the material to that of a standard material water.
Thus a relative density less than one means. The density of a material varies with pressure; this variation is small for solids and liquids but much greater for gases. Increasing the pressure on an object decreases the volume of the object and thus increases its density. Increasing the temperature of a substance decreases its density by increasing its volume. In most materials, heating the bottom of a fluid results in convection of the heat from the bottom to the top, due to the decrease in the density of the heated fluid; this causes it to rise relative to more dense unheated material. The reciprocal of the density of a substance is called its specific volume, a term sometimes used in thermodynamics. Density is an intensive property in that increasing the amount of a substance does not increase its density. In a well-known but apocryphal tale, Archimedes was given the task of determining whether King Hiero's goldsmith was embezzling gold during the manufacture of a golden wreath dedicated to the gods and replacing it with another, cheaper alloy.
Archimedes knew that the irregularly shaped wreath could be crushed into a cube whose volume could be calculated and compared with the mass. Baffled, Archimedes is said to have taken an immersion bath and observed from the rise of the water upon entering that he could calculate the volume of the gold wreath through the displacement of the water. Upon this discovery, he leapt from his bath and ran naked through the streets shouting, "Eureka! Eureka!". As a result, the term "eureka" entered common parlance and is used today to indicate a moment of enlightenment; the story first appeared in written form in Vitruvius' books of architecture, two centuries after it took place. Some scholars have doubted the accuracy of this tale, saying among other things that the method would have required precise measurements that would have been difficult to make at the time. From the equation for density, mass density has units of mass divided by volume; as there are many units of mass and volume covering many different magnitudes there are a large number of units for mass density in use.
The SI unit of kilogram per cubic metre and the cgs unit of gram per cubic centimetre are the most used units for density. One g/cm3 is equal to one thousand kg/m3. One cubic centimetre is equal to one millilitre. In industry, other larger or smaller units of mass and or volume are more practical and US customary units may be used. See below for a list of some of the most common units of density. A number of techniques as well as standards exist for the measurement of density of materials; such techniques include the use of a hydrometer, Hydrostatic balance, immersed body method, air comparison pycnometer, oscillating densitometer, as well as pour and tap. However, each individual method or technique measures different types of density, therefore it is necessary to have an understanding of the type of density being measured as well as the type of material in question; the density at all points of a homogeneous object equals its total mass divided by its total volume. The mass is measured with a scale or balance.
To determine the density of a liquid or a gas, a hydrometer, a dasymeter or a Coriolis flow meter may be used, respectively. Hydrostatic weighing uses the displacement of water due to a submerged object to determine the density of the object. If the body is not homogeneous its density varies between different regions of the object. In that case the density around any given location is determined by calculating the density of a small volume around that location. In the limit of an infinitesimal volume the density of an inhomogeneous object at a point becomes: ρ = d m / d V, where d V is an elementary volume at position r; the mass of the body t
The boiling point of a substance is the temperature at which the vapor pressure of a liquid equals the pressure surrounding the liquid and the liquid changes into a vapor. The boiling point of a liquid varies depending upon the surrounding environmental pressure. A liquid in a partial vacuum has a lower boiling point than when that liquid is at atmospheric pressure. A liquid at high pressure has a higher boiling point than when that liquid is at atmospheric pressure. For example, water at 93.4 °C at 1,905 metres altitude. For a given pressure, different liquids will boil at different temperatures; the normal boiling point of a liquid is the special case in which the vapor pressure of the liquid equals the defined atmospheric pressure at sea level, 1 atmosphere. At that temperature, the vapor pressure of the liquid becomes sufficient to overcome atmospheric pressure and allow bubbles of vapor to form inside the bulk of the liquid; the standard boiling point has been defined by IUPAC since 1982 as the temperature at which boiling occurs under a pressure of 1 bar.
The heat of vaporization is the energy required to transform a given quantity of a substance from a liquid into a gas at a given pressure. Liquids may change to a vapor at temperatures below their boiling points through the process of evaporation. Evaporation is a surface phenomenon in which molecules located near the liquid's edge, not contained by enough liquid pressure on that side, escape into the surroundings as vapor. On the other hand, boiling is a process in which molecules anywhere in the liquid escape, resulting in the formation of vapor bubbles within the liquid. A saturated liquid contains as much thermal energy. Saturation temperature means boiling point; the saturation temperature is the temperature for a corresponding saturation pressure at which a liquid boils into its vapor phase. The liquid can be said to be saturated with thermal energy. Any addition of thermal energy results in a phase transition. If the pressure in a system remains constant, a vapor at saturation temperature will begin to condense into its liquid phase as thermal energy is removed.
A liquid at saturation temperature and pressure will boil into its vapor phase as additional thermal energy is applied. The boiling point corresponds to the temperature at which the vapor pressure of the liquid equals the surrounding environmental pressure. Thus, the boiling point is dependent on the pressure. Boiling points may be published with respect to the NIST, USA standard pressure of 101.325 kPa, or the IUPAC standard pressure of 100.000 kPa. At higher elevations, where the atmospheric pressure is much lower, the boiling point is lower; the boiling point increases with increased pressure up to the critical point, where the gas and liquid properties become identical. The boiling point cannot be increased beyond the critical point; the boiling point decreases with decreasing pressure until the triple point is reached. The boiling point cannot be reduced below the triple point. If the heat of vaporization and the vapor pressure of a liquid at a certain temperature are known, the boiling point can be calculated by using the Clausius–Clapeyron equation, thus: T B = − 1, where: T B is the boiling point at the pressure of interest, R is the ideal gas constant, P is the vapour pressure of the liquid at the pressure of interest, P 0 is some pressure where the corresponding T 0 is known, Δ H vap is the heat of vaporization of the liquid, T 0 is the boiling temperature, ln is the natural logarithm.
Saturation pressure is the pressure for a corresponding saturation temperature at which a liquid boils into its vapor phase. Saturation pressure and saturation temperature have a direct relationship: as saturation pressure is increased, so is saturation temperature. If the temperature in a system remains constant, vapor at saturation pressure and temperature will begin to condense into its liquid phase as the system pressure is increased. A liquid at saturation pressure and temperature will tend to flash into its vapor phase as system pressure is decreased. There are two conventions regarding the standard boiling point of water: The normal boiling point is 99.97 °C at a pressure of 1 atm. The IUPAC recommended standard boiling point of water at a standard pressure of 100 kPa is 99.61 °C. For comparison, on top of Mount Everest, at 8,848 m elevation, the pressure is about 34 kPa and the boiling point of water is 71 °C; the Celsius temperature scale was defined until 1954 by two points: 0 °C being defined by the wate
The Jmol applet, among other abilities, offers an alternative to the Chime plug-in, no longer under active development. While Jmol has many features that Chime lacks, it does not claim to reproduce all Chime functions, most notably, the Sculpt mode. Chime requires plug-in installation and Internet Explorer 6.0 or Firefox 2.0 on Microsoft Windows, or Netscape Communicator 4.8 on Mac OS 9. Jmol operates on a wide variety of platforms. For example, Jmol is functional in Mozilla Firefox, Internet Explorer, Google Chrome, Safari. Chemistry Development Kit Comparison of software for molecular mechanics modeling Jmol extension for MediaWiki List of molecular graphics systems Molecular graphics Molecule editor Proteopedia PyMOL SAMSON Official website Wiki with listings of websites and moodles Willighagen, Egon. "Fast and Scriptable Molecular Graphics in Web Browsers without Java3D". Doi:10.1038/npre.2007.50.1