1.
Information
–
In other words, it is the answer to a question of some kind. It is thus related to data and knowledge, as data represents values attributed to parameters, as it regards data, the informations existence is not necessarily coupled to an observer, while in the case of knowledge, the information requires a cognitive observer. At its most fundamental, information is any propagation of cause, Information can be encoded into various forms for transmission and interpretation. It can also be encrypted for safe storage and communication, the uncertainty of an event is measured by its probability of occurrence and is inversely proportional to that. The more uncertain an event, the information is required to resolve uncertainty of that event. The bit is a unit of information, but other units such as the nat may be used. Example, information in one fair coin ﬂip, log2 =1 bit, the concept that information is the message has different meanings in different contexts. The English word was derived from the Latin stem of the nominative. Inform itself comes from the Latin verb informare, which means to give form, eidos can also be associated with thought, proposition, or even concept. The ancient Greek word for information is πληροφορία, which transliterates from πλήρης fully and it literally means fully bears or conveys fully. In modern Greek language the word Πληροφορία is still in use and has the same meaning as the word information in English. In addition to its meaning, the word Πληροφορία as a symbol has deep roots in Aristotles semiotic triangle. In this regard it can be interpreted to communicate information to the one decoding that specific type of sign, from the stance of information theory, information is taken as an ordered sequence of symbols from an alphabet, say an input alphabet χ, and an output alphabet ϒ. Information processing consists of a function that maps any input sequence from χ into an output sequence from ϒ. The mapping may be probabilistic or deterministic and it may have memory or be memoryless. Often information can be viewed as a type of input to an organism or system, inputs are of two kinds, some inputs are important to the function of the organism or system by themselves. In his book Sensory Ecology Dusenbery called these causal inputs, other inputs are important only because they are associated with causal inputs and can be used to predict the occurrence of a causal input at a later time. Some information is important because of association with information but eventually there must be a connection to a causal input

2.
Computer data storage
–
Computer data storage, often called storage or memory, is a technology consisting of computer components and recording media used to retain digital data. It is a function and fundamental component of computers. The central processing unit of a computer is what manipulates data by performing computations, in practice, almost all computers use a storage hierarchy, which puts fast but expensive and small storage options close to the CPU and slower but larger and cheaper options farther away. In the Von Neumann architecture, the CPU consists of two parts, The control unit and the arithmetic logic unit. The former controls the flow of data between the CPU and memory, while the latter performs arithmetic and logical operations on data, without a significant amount of memory, a computer would merely be able to perform fixed operations and immediately output the result. It would have to be reconfigured to change its behavior and this is acceptable for devices such as desk calculators, digital signal processors, and other specialized devices. Von Neumann machines differ in having a memory in which they store their operating instructions, most modern computers are von Neumann machines. A modern digital computer represents data using the numeral system. Text, numbers, pictures, audio, and nearly any form of information can be converted into a string of bits, or binary digits. The most common unit of storage is the byte, equal to 8 bits, a piece of information can be handled by any computer or device whose storage space is large enough to accommodate the binary representation of the piece of information, or simply data. For example, the works of Shakespeare, about 1250 pages in print. Data is encoded by assigning a bit pattern to each character, digit, by adding bits to each encoded unit, redundancy allows the computer to both detect errors in coded data and correct them based on mathematical algorithms. A random bit flip is typically corrected upon detection, the cyclic redundancy check method is typically used in communications and storage for error detection. A detected error is then retried, data compression methods allow in many cases to represent a string of bits by a shorter bit string and reconstruct the original string when needed. This utilizes substantially less storage for many types of data at the cost of more computation, analysis of trade-off between storage cost saving and costs of related computations and possible delays in data availability is done before deciding whether to keep certain data compressed or not. For security reasons certain types of data may be encrypted in storage to prevent the possibility of unauthorized information reconstruction from chunks of storage snapshots. Generally, the lower a storage is in the hierarchy, the lesser its bandwidth and this traditional division of storage to primary, secondary, tertiary and off-line storage is also guided by cost per bit. In contemporary usage, memory is usually semiconductor storage read-write random-access memory, typically DRAM or other forms of fast but temporary storage

3.
International System of Units
–
The International System of Units is the modern form of the metric system, and is the most widely used system of measurement. It comprises a coherent system of units of measurement built on seven base units, the system also establishes a set of twenty prefixes to the unit names and unit symbols that may be used when specifying multiples and fractions of the units. The system was published in 1960 as the result of an initiative began in 1948. It is based on the system of units rather than any variant of the centimetre-gram-second system. The motivation for the development of the SI was the diversity of units that had sprung up within the CGS systems, the International System of Units has been adopted by most developed countries, however, the adoption has not been universal in all English-speaking countries. The metric system was first implemented during the French Revolution with just the metre and kilogram as standards of length, in the 1830s Carl Friedrich Gauss laid the foundations for a coherent system based on length, mass, and time. In the 1860s a group working under the auspices of the British Association for the Advancement of Science formulated the requirement for a coherent system of units with base units and derived units. Meanwhile, in 1875, the Treaty of the Metre passed responsibility for verification of the kilogram, in 1921, the Treaty was extended to include all physical quantities including electrical units originally defined in 1893. The units associated with these quantities were the metre, kilogram, second, ampere, kelvin, in 1971, a seventh base quantity, amount of substance represented by the mole, was added to the definition of SI. On 11 July 1792, the proposed the names metre, are, litre and grave for the units of length, area, capacity. The committee also proposed that multiples and submultiples of these units were to be denoted by decimal-based prefixes such as centi for a hundredth, on 10 December 1799, the law by which the metric system was to be definitively adopted in France was passed. Prior to this, the strength of the magnetic field had only been described in relative terms. The technique used by Gauss was to equate the torque induced on a magnet of known mass by the earth’s magnetic field with the torque induced on an equivalent system under gravity. The resultant calculations enabled him to assign dimensions based on mass, length, a French-inspired initiative for international cooperation in metrology led to the signing in 1875 of the Metre Convention. Initially the convention only covered standards for the metre and the kilogram, one of each was selected at random to become the International prototype metre and International prototype kilogram that replaced the mètre des Archives and kilogramme des Archives respectively. Each member state was entitled to one of each of the prototypes to serve as the national prototype for that country. Initially its prime purpose was a periodic recalibration of national prototype metres. The official language of the Metre Convention is French and the version of all official documents published by or on behalf of the CGPM is the French-language version

4.
Long and short scales
–
Thus, billion means a million millions, trillion means a million billions, and so on. Short scale Every new term greater than million is one thousand times larger than the previous term, thus, billion means a thousand millions, trillion means a thousand billions, and so on. For whole numbers less than a million the two scales are identical. From a thousand million up the two scales diverge, using the words for different numbers, this can cause misunderstanding. Countries where the scale is currently used include most countries in continental Europe and most French-speaking, Spanish-speaking. The short scale is now used in most English-speaking and Arabic-speaking countries, in Brazil, in former Soviet Union, number names are rendered in the language of the country, but are similar everywhere due to shared etymology. Some languages, particularly in East Asia and South Asia, have large number naming systems that are different from both the long and short scales, for example the Indian numbering system. After several decades of increasing informal British usage of the scale, in 1974 the government of the UK adopted it. With very few exceptions, the British usage and American usage are now identical, the first recorded use of the terms short scale and long scale was by the French mathematician Geneviève Guitel in 1975. At and above a million the same names are used to refer to numbers differing by a factor of an integer power of 1,000. Each scale has a justification to explain the use of each such differing numerical name. The short-scale logic is based on powers of one thousand, whereas the long-scale logic is based on powers of one million, in both scales, the prefix bi- refers to 2 and tri- refers to 3, etc. However only in the scale do the prefixes beyond one million indicate the actual power or exponent. In the short scale, the prefixes refer to one less than the exponent, the word, million, derives from the Old French, milion, from the earlier Old Italian, milione, an intensification of the Latin word, mille, a thousand. That is, a million is a big thousand, much as a great gross is a dozen gross or 12×144 =1728, the word, milliard, or its translation, is found in many European languages and is used in those languages for 109. However, it is unknown in American English, which uses billion, and not used in British English, which preferred to use thousand million before the current usage of billion. The financial term, yard, which derives from milliard, is used on financial markets, as, unlike the term, billion, it is internationally unambiguous and phonetically distinct from million. Likewise, many long scale use the word billiard for one thousand long scale billions

5.
Binary prefix
–
A binary prefix is a unit prefix for multiples of units in data processing, data transmission, and digital information, notably the bit and the byte, to indicate multiplication by a power of 2. The computer industry has used the units kilobyte, megabyte, and gigabyte, and the corresponding symbols KB, MB. In citations of main memory capacity, gigabyte customarily means 1073741824 bytes, as this is the third power of 1024, and 1024 is a power of two, this usage is referred to as a binary measurement. In most other contexts, the uses the multipliers kilo, mega, giga, etc. in a manner consistent with their meaning in the International System of Units. For example, a 500 gigabyte hard disk holds 500000000000 bytes, in contrast with the binary prefix usage, this use is described as a decimal prefix, as 1000 is a power of 10. The use of the same unit prefixes with two different meanings has caused confusion, in 2008, the IEC prefixes were incorporated into the ISO/IEC80000 standard. Early computers used one of two addressing methods to access the memory, binary or decimal. For example, the IBM701 used binary and could address 2048 words of 36 bits each, while the IBM702 used decimal, by the mid-1960s, binary addressing had become the standard architecture in most computer designs, and main memory sizes were most commonly powers of two. Early computer system documentation would specify the size with an exact number such as 4096,8192. These are all powers of two, and furthermore are small multiples of 210, or 1024, as storage capacities increased, several different methods were developed to abbreviate these quantities. The method most commonly used today uses prefixes such as kilo, mega, giga, and corresponding symbols K, M, and G, the prefixes kilo- and mega-, meaning 1000 and 1000000 respectively, were commonly used in the electronics industry before World War II. Along with giga- or G-, meaning 1000000000, they are now known as SI prefixes after the International System of Units, introduced in 1960 to formalize aspects of the metric system. The International System of Units does not define units for digital information and this usage is not consistent with the SI. Compliance with the SI requires that the prefixes take their 1000-based meaning, the use of K in the binary sense as in a 32K core meaning 32 ×1024 words, i. e.32768 words, can be found as early as 1959. Gene Amdahls seminal 1964 article on IBM System/360 used 1K to mean 1024 and this style was used by other computer vendors, the CDC7600 System Description made extensive use of K as 1024. Thus the first binary prefix was born, the exact values 32768 words,65536 words and 131072 words would then be described as 32K, 65K and 131K. This style was used from about 1965 to 1975 and these two styles were used loosely around the same time, sometimes by the same company. In discussions of binary-addressed memories, the size was evident from context

6.
Metric prefix
–
A metric prefix is a unit prefix that precedes a basic unit of measure to indicate a multiple or fraction of the unit. While all metric prefixes in use today are decadic, historically there have been a number of binary metric prefixes as well. Each prefix has a symbol that is prepended to the unit symbol. The prefix kilo-, for example, may be added to gram to indicate multiplication by one thousand, the prefix milli-, likewise, may be added to metre to indicate division by one thousand, one millimetre is equal to one thousandth of a metre. Decimal multiplicative prefixes have been a feature of all forms of the system with six dating back to the systems introduction in the 1790s. Metric prefixes have even been prepended to non-metric units, the SI prefixes are standardized for use in the International System of Units by the International Bureau of Weights and Measures in resolutions dating from 1960 to 1991. Since 2009, they have formed part of the International System of Quantities, the BIPM specifies twenty prefixes for the International System of Units. Each prefix name has a symbol which is used in combination with the symbols for units of measure. For example, the symbol for kilo- is k, and is used to produce km, kg, and kW, which are the SI symbols for kilometre, kilogram, prefixes corresponding to an integer power of one thousand are generally preferred. Hence 100 m is preferred over 1 hm or 10 dam, the prefixes hecto, deca, deci, and centi are commonly used for everyday purposes, and the centimetre is especially common. However, some building codes require that the millimetre be used in preference to the centimetre, because use of centimetres leads to extensive usage of decimal points. Prefixes may not be used in combination and this also applies to mass, for which the SI base unit already contains a prefix. For example, milligram is used instead of microkilogram, in the arithmetic of measurements having units, the units are treated as multiplicative factors to values. If they have prefixes, all but one of the prefixes must be expanded to their numeric multiplier,1 km2 means one square kilometre, or the area of a square of 1000 m by 1000 m and not 1000 square metres. 2 Mm3 means two cubic megametres, or the volume of two cubes of 1000000 m by 1000000 m by 1000000 m or 2×1018 m3, and not 2000000 cubic metres, examples 5 cm = 5×10−2 m =5 ×0.01 m =0. The prefixes, including those introduced after 1960, are used with any metric unit, metric prefixes may also be used with non-metric units. The choice of prefixes with a unit is usually dictated by convenience of use. Unit prefixes for amounts that are larger or smaller than those actually encountered are seldom used