In physics, an orbit is the gravitationally curved trajectory of an object, such as the trajectory of a planet around a star or a natural satellite around a planet. Orbit refers to a repeating trajectory, although it may refer to a non-repeating trajectory. To a close approximation and satellites follow elliptic orbits, with the central mass being orbited at a focal point of the ellipse, as described by Kepler's laws of planetary motion. For most situations, orbital motion is adequately approximated by Newtonian mechanics, which explains gravity as a force obeying an inverse-square law. However, Albert Einstein's general theory of relativity, which accounts for gravity as due to curvature of spacetime, with orbits following geodesics, provides a more accurate calculation and understanding of the exact mechanics of orbital motion; the apparent motions of the planets were described by European and Arabic philosophers using the idea of celestial spheres. This model posited the existence of perfect moving spheres or rings to which the stars and planets were attached.
It assumed the heavens were fixed apart from the motion of the spheres, was developed without any understanding of gravity. After the planets' motions were more measured, theoretical mechanisms such as deferent and epicycles were added. Although the model was capable of reasonably predicting the planets' positions in the sky and more epicycles were required as the measurements became more accurate, hence the model became unwieldy. Geocentric it was modified by Copernicus to place the Sun at the centre to help simplify the model; the model was further challenged during the 16th century, as comets were observed traversing the spheres. The basis for the modern understanding of orbits was first formulated by Johannes Kepler whose results are summarised in his three laws of planetary motion. First, he found that the orbits of the planets in our Solar System are elliptical, not circular, as had been believed, that the Sun is not located at the center of the orbits, but rather at one focus. Second, he found that the orbital speed of each planet is not constant, as had been thought, but rather that the speed depends on the planet's distance from the Sun.
Third, Kepler found a universal relationship between the orbital properties of all the planets orbiting the Sun. For the planets, the cubes of their distances from the Sun are proportional to the squares of their orbital periods. Jupiter and Venus, for example, are about 5.2 and 0.723 AU distant from the Sun, their orbital periods about 11.86 and 0.615 years. The proportionality is seen by the fact that the ratio for Jupiter, 5.23/11.862, is equal to that for Venus, 0.7233/0.6152, in accord with the relationship. Idealised orbits meeting these rules are known as Kepler orbits. Isaac Newton demonstrated that Kepler's laws were derivable from his theory of gravitation and that, in general, the orbits of bodies subject to gravity were conic sections. Newton showed that, for a pair of bodies, the orbits' sizes are in inverse proportion to their masses, that those bodies orbit their common center of mass. Where one body is much more massive than the other, it is a convenient approximation to take the center of mass as coinciding with the center of the more massive body.
Advances in Newtonian mechanics were used to explore variations from the simple assumptions behind Kepler orbits, such as the perturbations due to other bodies, or the impact of spheroidal rather than spherical bodies. Lagrange developed a new approach to Newtonian mechanics emphasizing energy more than force, made progress on the three body problem, discovering the Lagrangian points. In a dramatic vindication of classical mechanics, in 1846 Urbain Le Verrier was able to predict the position of Neptune based on unexplained perturbations in the orbit of Uranus. Albert Einstein in his 1916 paper The Foundation of the General Theory of Relativity explained that gravity was due to curvature of space-time and removed Newton's assumption that changes propagate instantaneously; this led astronomers to recognize that Newtonian mechanics did not provide the highest accuracy in understanding orbits. In relativity theory, orbits follow geodesic trajectories which are approximated well by the Newtonian predictions but the differences are measurable.
All the experimental evidence that can distinguish between the theories agrees with relativity theory to within experimental measurement accuracy. The original vindication of general relativity is that it was able to account for the remaining unexplained amount in precession of Mercury's perihelion first noted by Le Verrier. However, Newton's solution is still used for most short term purposes since it is easier to use and sufficiently accurate. Within a planetary system, dwarf planets and other minor planets and space debris orbit the system's barycenter in elliptical orbits. A comet in a parabolic or hyperbolic orbit about a barycenter is not gravitationally bound to the star and therefore is not considered part of the star's planetary system. Bodies which are gravitationally bound to one of the planets in a planetary system, either natural or artificial satellites, follow orbits about a barycenter near or within that planet. Owing to mutual gravitational perturbations, the eccentricities of the planetary orbits vary over time.
Mercury, the smallest planet in the Solar System, has the most eccentric orbit
SIMBAD is an astronomical database of objects beyond the Solar System. It is maintained by the Centre de données astronomiques de France. SIMBAD was created by merging the Catalog of Stellar Identifications and the Bibliographic Star Index as they existed at the Meudon Computer Centre until 1979, expanded by additional source data from other catalogues and the academic literature; the first on-line interactive version, known as Version 2, was made available in 1981. Version 3, developed in the C language and running on UNIX stations at the Strasbourg Observatory, was released in 1990. Fall of 2006 saw the release of Version 4 of the database, now stored in PostgreSQL, the supporting software, now written in Java; as of 10 February 2017, SIMBAD contains information for 9,099,070 objects under 24,529,080 different names, with 327,634 bibliographical references and 15,511,733 bibliographic citations. The minor planet 4692 SIMBAD was named in its honour. Planetary Data System – NASA's database of information on SSSB, maintained by JPL and Caltech.
NASA/IPAC Extragalactic Database – a database of information on objects outside the Milky Way maintained by JPL. NASA Exoplanet Archive – an online astronomical exoplanet catalog and data service Bibcode SIMBAD, Strasbourg SIMBAD, Harvard
The orbital eccentricity of an astronomical object is a parameter that determines the amount by which its orbit around another body deviates from a perfect circle. A value of 0 is a circular orbit, values between 0 and 1 form an elliptic orbit, 1 is a parabolic escape orbit, greater than 1 is a hyperbola; the term derives its name from the parameters of conic sections, as every Kepler orbit is a conic section. It is used for the isolated two-body problem, but extensions exist for objects following a Klemperer rosette orbit through the galaxy. In a two-body problem with inverse-square-law force, every orbit is a Kepler orbit; the eccentricity of this Kepler orbit is a non-negative number. The eccentricity may take the following values: circular orbit: e = 0 elliptic orbit: 0 < e < 1 parabolic trajectory: e = 1 hyperbolic trajectory: e > 1 The eccentricity e is given by e = 1 + 2 E L 2 m red α 2 where E is the total orbital energy, L is the angular momentum, mred is the reduced mass, α the coefficient of the inverse-square law central force such as gravity or electrostatics in classical physics: F = α r 2 or in the case of a gravitational force: e = 1 + 2 ε h 2 μ 2 where ε is the specific orbital energy, μ the standard gravitational parameter based on the total mass, h the specific relative angular momentum.
For values of e from 0 to 1 the orbit's shape is an elongated ellipse. The limit case between an ellipse and a hyperbola, when e equals 1, is parabola. Radial trajectories are classified as elliptic, parabolic, or hyperbolic based on the energy of the orbit, not the eccentricity. Radial orbits hence eccentricity equal to one. Keeping the energy constant and reducing the angular momentum, elliptic and hyperbolic orbits each tend to the corresponding type of radial trajectory while e tends to 1. For a repulsive force only the hyperbolic trajectory, including the radial version, is applicable. For elliptical orbits, a simple proof shows that arcsin yields the projection angle of a perfect circle to an ellipse of eccentricity e. For example, to view the eccentricity of the planet Mercury, one must calculate the inverse sine to find the projection angle of 11.86 degrees. Next, tilt any circular object by that angle and the apparent ellipse projected to your eye will be of that same eccentricity; the word "eccentricity" comes from Medieval Latin eccentricus, derived from Greek ἔκκεντρος ekkentros "out of the center", from ἐκ- ek-, "out of" + κέντρον kentron "center".
"Eccentric" first appeared in English in 1551, with the definition "a circle in which the earth, sun. Etc. deviates from its center". By five years in 1556, an adjectival form of the word had developed; the eccentricity of an orbit can be calculated from the orbital state vectors as the magnitude of the eccentricity vector: e = | e | where: e is the eccentricity vector. For elliptical orbits it can be calculated from the periapsis and apoapsis since rp = a and ra = a, where a is the semimajor axis. E = r a − r p r a + r p = 1 − 2 r a r p + 1 where: ra is the radius at apoapsis. Rp is the radius at periapsis; the eccentricity of an elliptical orbit can be used to obtain the ratio of the periapsis to the apoapsis: r p r a = 1 − e 1 + e For Earth, orbital eccentricity ≈ 0.0167, apoapsis= aphelion and periapsis= perihelion relative to sun. For Earth's annual orbit path, ra/rp ratio = longest_radius / shortest_radius ≈ 1.034 relative to center point of path. The eccentricity of the Earth's orbit is about 0.0167.
The apparent magnitude of an astronomical object is a number, a measure of its brightness as seen by an observer on Earth. The magnitude scale is logarithmic. A difference of 1 in magnitude corresponds to a change in brightness by a factor of 5√100, or about 2.512. The brighter an object appears, the lower its magnitude value, with the brightest astronomical objects having negative apparent magnitudes: for example Sirius at −1.46. The measurement of apparent magnitudes or brightnesses of celestial objects is known as photometry. Apparent magnitudes are used to quantify the brightness of sources at ultraviolet and infrared wavelengths. An apparent magnitude is measured in a specific passband corresponding to some photometric system such as the UBV system. In standard astronomical notation, an apparent magnitude in the V filter band would be denoted either as mV or simply as V, as in "mV = 15" or "V = 15" to describe a 15th-magnitude object; the scale used to indicate magnitude originates in the Hellenistic practice of dividing stars visible to the naked eye into six magnitudes.
The brightest stars in the night sky were said to be of first magnitude, whereas the faintest were of sixth magnitude, the limit of human visual perception. Each grade of magnitude was considered twice the brightness of the following grade, although that ratio was subjective as no photodetectors existed; this rather crude scale for the brightness of stars was popularized by Ptolemy in his Almagest and is believed to have originated with Hipparchus. In 1856, Norman Robert Pogson formalized the system by defining a first magnitude star as a star, 100 times as bright as a sixth-magnitude star, thereby establishing the logarithmic scale still in use today; this implies that a star of magnitude m is about 2.512 times as bright as a star of magnitude m + 1. This figure, the fifth root of 100, became known as Pogson's Ratio; the zero point of Pogson's scale was defined by assigning Polaris a magnitude of 2. Astronomers discovered that Polaris is variable, so they switched to Vega as the standard reference star, assigning the brightness of Vega as the definition of zero magnitude at any specified wavelength.
Apart from small corrections, the brightness of Vega still serves as the definition of zero magnitude for visible and near infrared wavelengths, where its spectral energy distribution approximates that of a black body for a temperature of 11000 K. However, with the advent of infrared astronomy it was revealed that Vega's radiation includes an Infrared excess due to a circumstellar disk consisting of dust at warm temperatures. At shorter wavelengths, there is negligible emission from dust at these temperatures. However, in order to properly extend the magnitude scale further into the infrared, this peculiarity of Vega should not affect the definition of the magnitude scale. Therefore, the magnitude scale was extrapolated to all wavelengths on the basis of the black-body radiation curve for an ideal stellar surface at 11000 K uncontaminated by circumstellar radiation. On this basis the spectral irradiance for the zero magnitude point, as a function of wavelength, can be computed. Small deviations are specified between systems using measurement apparatuses developed independently so that data obtained by different astronomers can be properly compared, but of greater practical importance is the definition of magnitude not at a single wavelength but applying to the response of standard spectral filters used in photometry over various wavelength bands.
With the modern magnitude systems, brightness over a wide range is specified according to the logarithmic definition detailed below, using this zero reference. In practice such apparent magnitudes do not exceed 30; the brightness of Vega is exceeded by four stars in the night sky at visible wavelengths as well as the bright planets Venus and Jupiter, these must be described by negative magnitudes. For example, the brightest star of the celestial sphere, has an apparent magnitude of −1.4 in the visible. Negative magnitudes for other bright astronomical objects can be found in the table below. Astronomers have developed other photometric zeropoint systems as alternatives to the Vega system; the most used is the AB magnitude system, in which photometric zeropoints are based on a hypothetical reference spectrum having constant flux per unit frequency interval, rather than using a stellar spectrum or blackbody curve as the reference. The AB magnitude zeropoint is defined such that an object's AB and Vega-based magnitudes will be equal in the V filter band.
As the amount of light received by a telescope is reduced by transmission through the Earth's atmosphere, any measurement of apparent magnitude is corrected for what it would have been as seen from above the atmosphere. The dimmer an object appears, the higher the numerical value given to its apparent magnitude, with a difference of 5 magnitudes corresponding to a brightness factor of 100. Therefore, the apparent magnitude m, in the spectral band x, would be given by m x = − 5 log 100 , more expressed in terms of common logarithms as m x
Arabic is a Central Semitic language that first emerged in Iron Age northwestern Arabia and is now the lingua franca of the Arab world. It is named after the Arabs, a term used to describe peoples living in the area bounded by Mesopotamia in the east and the Anti-Lebanon mountains in the west, in northwestern Arabia, in the Sinai Peninsula. Arabic is classified as a macrolanguage comprising 30 modern varieties, including its standard form, Modern Standard Arabic, derived from Classical Arabic; as the modern written language, Modern Standard Arabic is taught in schools and universities, is used to varying degrees in workplaces and the media. The two formal varieties are grouped together as Literary Arabic, the official language of 26 states, the liturgical language of the religion of Islam, since the Quran and Hadith were written in Arabic. Modern Standard Arabic follows the grammatical standards of Classical Arabic, uses much of the same vocabulary. However, it has discarded some grammatical constructions and vocabulary that no longer have any counterpart in the spoken varieties, has adopted certain new constructions and vocabulary from the spoken varieties.
Much of the new vocabulary is used to denote concepts that have arisen in the post-classical era in modern times. Due to its grounding in Classical Arabic, Modern Standard Arabic is removed over a millennium from everyday speech, construed as a multitude of dialects of this language; these dialects and Modern Standard Arabic are described by some scholars as not mutually comprehensible. The former are acquired in families, while the latter is taught in formal education settings. However, there have been studies reporting some degree of comprehension of stories told in the standard variety among preschool-aged children; the relation between Modern Standard Arabic and these dialects is sometimes compared to that of Latin and vernaculars in medieval and early modern Europe. This view though does not take into account the widespread use of Modern Standard Arabic as a medium of audiovisual communication in today's mass media—a function Latin has never performed. During the Middle Ages, Literary Arabic was a major vehicle of culture in Europe in science and philosophy.
As a result, many European languages have borrowed many words from it. Arabic influence in vocabulary, is seen in European languages Spanish and to a lesser extent Portuguese, Catalan, owing to both the proximity of Christian European and Muslim Arab civilizations and 800 years of Arabic culture and language in the Iberian Peninsula, referred to in Arabic as al-Andalus. Sicilian has about 500 Arabic words as result of Sicily being progressively conquered by Arabs from North Africa, from the mid-9th to mid-10th centuries. Many of these words relate to related activities; the Balkan languages, including Greek and Bulgarian, have acquired a significant number of Arabic words through contact with Ottoman Turkish. Arabic has influenced many languages around the globe throughout its history; some of the most influenced languages are Persian, Spanish, Kashmiri, Bosnian, Bengali, Malay, Indonesian, Punjabi, Assamese, Sindhi and Hausa, some languages in parts of Africa. Conversely, Arabic has borrowed words from other languages, including Greek and Persian in medieval times, contemporary European languages such as English and French in modern times.
Classical Arabic is the liturgical language of 1.8 billion Muslims, Modern Standard Arabic is one of six official languages of the United Nations. All varieties of Arabic combined are spoken by as many as 422 million speakers in the Arab world, making it the fifth most spoken language in the world. Arabic is written with the Arabic alphabet, an abjad script and is written from right to left, although the spoken varieties are sometimes written in ASCII Latin from left to right with no standardized orthography. Arabic is a Central Semitic language related to the Northwest Semitic languages, the Ancient South Arabian languages, various other Semitic languages of Arabia such as Dadanitic; the Semitic languages changed a great deal between Proto-Semitic and the establishment of the Central Semitic languages in grammar. Innovations of the Central Semitic languages—all maintained in Arabic—include: The conversion of the suffix-conjugated stative formation into a past tense; the conversion of the prefix-conjugated preterite-tense formation into a present tense.
The elimination of other prefix-conjugated mood/aspect forms in favor of new moods formed by endings attached to the prefix-conjugation forms. The development of an internal passive. There are several features which Classical Arabic, the modern Arabic varieties, as well as the Safaitic and Hismaic inscriptions share which are unattested in any other Central Semitic language variety, including the Dadanitic and Taymanitic languages of the northern Hejaz; these features are evidence of common descent from Proto-Arabic. The following features can be reconstructed with confidence for Proto-Arabic: negative particles m *mā.
In astronomy, stellar classification is the classification of stars based on their spectral characteristics. Electromagnetic radiation from the star is analyzed by splitting it with a prism or diffraction grating into a spectrum exhibiting the rainbow of colors interspersed with spectral lines; each line indicates a particular chemical element or molecule, with the line strength indicating the abundance of that element. The strengths of the different spectral lines vary due to the temperature of the photosphere, although in some cases there are true abundance differences; the spectral class of a star is a short code summarizing the ionization state, giving an objective measure of the photosphere's temperature. Most stars are classified under the Morgan-Keenan system using the letters O, B, A, F, G, K, M, a sequence from the hottest to the coolest; each letter class is subdivided using a numeric digit with 0 being hottest and 9 being coolest. The sequence has been expanded with classes for other stars and star-like objects that do not fit in the classical system, such as class D for white dwarfs and classes S and C for carbon stars.
In the MK system, a luminosity class is added to the spectral class using Roman numerals. This is based on the width of certain absorption lines in the star's spectrum, which vary with the density of the atmosphere and so distinguish giant stars from dwarfs. Luminosity class 0 or Ia+ is used for hypergiants, class I for supergiants, class II for bright giants, class III for regular giants, class IV for sub-giants, class V for main-sequence stars, class sd for sub-dwarfs, class D for white dwarfs; the full spectral class for the Sun is G2V, indicating a main-sequence star with a temperature around 5,800 K. The conventional color description takes into account only the peak of the stellar spectrum. In actuality, stars radiate in all parts of the spectrum; because all spectral colors combined appear white, the actual apparent colors the human eye would observe are far lighter than the conventional color descriptions would suggest. This characteristic of'lightness' indicates that the simplified assignment of colors within the spectrum can be misleading.
Excluding color-contrast illusions in dim light, there are indigo, or violet stars. Red dwarfs are a deep shade of orange, brown dwarfs do not appear brown, but hypothetically would appear dim grey to a nearby observer; the modern classification system is known as the Morgan–Keenan classification. Each star is assigned a spectral class from the older Harvard spectral classification and a luminosity class using Roman numerals as explained below, forming the star's spectral type. Other modern stellar classification systems, such as the UBV system, are based on color indexes—the measured differences in three or more color magnitudes; those numbers are given labels such as "U-V" or "B-V", which represent the colors passed by two standard filters. The Harvard system is a one-dimensional classification scheme by astronomer Annie Jump Cannon, who re-ordered and simplified a prior alphabetical system. Stars are grouped according to their spectral characteristics by single letters of the alphabet, optionally with numeric subdivisions.
Main-sequence stars vary in surface temperature from 2,000 to 50,000 K, whereas more-evolved stars can have temperatures above 100,000 K. Physically, the classes indicate the temperature of the star's atmosphere and are listed from hottest to coldest; the spectral classes O through M, as well as other more specialized classes discussed are subdivided by Arabic numerals, where 0 denotes the hottest stars of a given class. For example, A0 denotes A9 denotes the coolest ones. Fractional numbers are allowed; the Sun is classified as G2. Conventional color descriptions are traditional in astronomy, represent colors relative to the mean color of an A class star, considered to be white; the apparent color descriptions are what the observer would see if trying to describe the stars under a dark sky without aid to the eye, or with binoculars. However, most stars in the sky, except the brightest ones, appear white or bluish white to the unaided eye because they are too dim for color vision to work. Red supergiants are cooler and redder than dwarfs of the same spectral type, stars with particular spectral features such as carbon stars may be far redder than any black body.
The fact that the Harvard classification of a star indicated its surface or photospheric temperature was not understood until after its development, though by the time the first Hertzsprung–Russell diagram was formulated, this was suspected to be true. In the 1920s, the Indian physicist Meghnad Saha derived a theory of ionization by extending well-known ideas in physical chemistry pertaining to the dissociation of molecules to the ionization of atoms. First he applied it to the solar chromosphere to stellar spectra. Harvard astronomer Cecilia Payne demonstrated that the O-B-A-F-G-K-M spectral sequence is a sequence in temperature; because the classification sequence predates our understanding that it is a temperature sequence, the placement of a spectrum into a given subtype, such as B3 or A7, depends upon estimates of the strengths of absorption features in stellar spectra. As a result, these subtypes are not evenly divided into any sort of mathematically representable intervals; the Yerkes spectral classification called the MKK system from the authors' initial
Stellar evolution is the process by which a star changes over the course of time. Depending on the mass of the star, its lifetime can range from a few million years for the most massive to trillions of years for the least massive, longer than the age of the universe; the table shows the lifetimes of stars as a function of their masses. All stars are born from collapsing clouds of gas and dust called nebulae or molecular clouds. Over the course of millions of years, these protostars settle down into a state of equilibrium, becoming what is known as a main-sequence star. Nuclear fusion powers a star for most of its life; the energy is generated by the fusion of hydrogen atoms at the core of the main-sequence star. As the preponderance of atoms at the core becomes helium, stars like the Sun begin to fuse hydrogen along a spherical shell surrounding the core; this process causes the star to grow in size, passing through the subgiant stage until it reaches the red giant phase. Stars with at least half the mass of the Sun can begin to generate energy through the fusion of helium at their core, whereas more-massive stars can fuse heavier elements along a series of concentric shells.
Once a star like the Sun has exhausted its nuclear fuel, its core collapses into a dense white dwarf and the outer layers are expelled as a planetary nebula. Stars with around ten or more times the mass of the Sun can explode in a supernova as their inert iron cores collapse into an dense neutron star or black hole. Although the universe is not old enough for any of the smallest red dwarfs to have reached the end of their lives, stellar models suggest they will become brighter and hotter before running out of hydrogen fuel and becoming low-mass white dwarfs. Stellar evolution is not studied by observing the life of a single star, as most stellar changes occur too to be detected over many centuries. Instead, astrophysicists come to understand how stars evolve by observing numerous stars at various points in their lifetime, by simulating stellar structure using computer models. Stellar evolution starts with the gravitational collapse of a giant molecular cloud. Typical giant molecular clouds are 100 light-years across and contain up to 6,000,000 solar masses.
As it collapses, a giant molecular cloud breaks into smaller pieces. In each of these fragments, the collapsing gas releases gravitational potential energy as heat; as its temperature and pressure increase, a fragment condenses into a rotating sphere of superhot gas known as a protostar. A protostar continues to grow by accretion of gas and dust from the molecular cloud, becoming a pre-main-sequence star as it reaches its final mass. Further development is determined by its mass. Mass is compared to the mass of the Sun: 1.0 M☉ means 1 solar mass. Protostars are encompassed in dust, are thus more visible at infrared wavelengths. Observations from the Wide-field Infrared Survey Explorer have been important for unveiling numerous Galactic protostars and their parent star clusters. Protostars with masses less than 0.08 M☉ never reach temperatures high enough for nuclear fusion of hydrogen to begin. These are known as brown dwarfs; the International Astronomical Union defines brown dwarfs as stars massive enough to fuse deuterium at some point in their lives.
Objects smaller than 13 MJ are classified as sub-brown dwarfs. Both types, deuterium-burning and not, shine dimly and die away cooling over hundreds of millions of years. For a more-massive protostar, the core temperature will reach 10 million kelvin, initiating the proton–proton chain reaction and allowing hydrogen to fuse, first to deuterium and to helium. In stars of over 1 M☉, the carbon–nitrogen–oxygen fusion reaction contributes a large portion of the energy generation; the onset of nuclear fusion leads quickly to a hydrostatic equilibrium in which energy released by the core maintains a high gas pressure, balancing the weight of the star's matter and preventing further gravitational collapse. The star thus evolves to a stable state, beginning the main-sequence phase of its evolution. A new star will sit at a specific point on the main sequence of the Hertzsprung–Russell diagram, with the main-sequence spectral type depending upon the mass of the star. Small cold, low-mass red dwarfs fuse hydrogen and will remain on the main sequence for hundreds of billions of years or longer, whereas massive, hot O-type stars will leave the main sequence after just a few million years.
A mid-sized yellow dwarf star, like the Sun, will remain on the main sequence for about 10 billion years. The Sun is thought to be in the middle of its main sequence lifespan; the core exhausts its supply of hydrogen and the star begins to evolve off of the main sequence. Without the outward pressure generated by the fusion of hydrogen to counteract the force of gravity the core contracts until either electron degeneracy pressure becomes sufficient to oppose gravity or the core becomes hot enough for helium fusion to begin. Which of these happens first depends upon the star's mass. What happens after a low-mass star ceases to produce energy through fusion has not been directly observed. Recent astrophysical models suggest that red dwarfs of 0.1 M☉ may stay on the main sequence for some six to twelve tril