Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed. Gauge pressure is the pressure relative to the ambient pressure. Various units are used to express pressure; some of these derive from a unit of force divided by a unit of area. Pressure may be expressed in terms of standard atmospheric pressure. Manometric units such as the centimetre of water, millimetre of mercury, inch of mercury are used to express pressures in terms of the height of column of a particular fluid in a manometer. Pressure is the amount of force applied at right angles to the surface of an object per unit area; the symbol for it is p or P. The IUPAC recommendation for pressure is a lower-case p. However, upper-case P is used; the usage of P vs p depends upon the field in which one is working, on the nearby presence of other symbols for quantities such as power and momentum, on writing style. Mathematically: p = F A, where: p is the pressure, F is the magnitude of the normal force, A is the area of the surface on contact.
Pressure is a scalar quantity. It relates the vector surface element with the normal force acting on it; the pressure is the scalar proportionality constant that relates the two normal vectors: d F n = − p d A = − p n d A. The minus sign comes from the fact that the force is considered towards the surface element, while the normal vector points outward; the equation has meaning in that, for any surface S in contact with the fluid, the total force exerted by the fluid on that surface is the surface integral over S of the right-hand side of the above equation. It is incorrect to say "the pressure is directed in such or such direction"; the pressure, as a scalar, has no direction. The force given by the previous relationship to the quantity has a direction, but the pressure does not. If we change the orientation of the surface element, the direction of the normal force changes accordingly, but the pressure remains the same. Pressure is distributed to solid boundaries or across arbitrary sections of fluid normal to these boundaries or sections at every point.
It is a fundamental parameter in thermodynamics, it is conjugate to volume. The SI unit for pressure is the pascal, equal to one newton per square metre; this name for the unit was added in 1971. Other units of pressure, such as pounds per square inch and bar, are in common use; the CGS unit of pressure is 0.1 Pa.. Pressure is sometimes expressed in grams-force or kilograms-force per square centimetre and the like without properly identifying the force units, but using the names kilogram, kilogram-force, or gram-force as units of force is expressly forbidden in SI. The technical atmosphere is 1 kgf/cm2. Since a system under pressure has the potential to perform work on its surroundings, pressure is a measure of potential energy stored per unit volume, it is therefore related to energy density and may be expressed in units such as joules per cubic metre. Mathematically: p =; some meteorologists prefer the hectopascal for atmospheric air pressure, equivalent to the older unit millibar. Similar pressures are given in kilopascals in most other fields, where the hecto- prefix is used.
The inch of mercury is still used in the United States. Oceanographers measure underwater pressure in decibars because pressure in the ocean increases by one decibar per metre depth; the standard atmosphere is an established constant. It is equal to typical air pressure at Earth mean sea level and is defined as 101325 Pa; because pressure is measured by its ability to displace a column of liquid in a manometer, pressures are expressed as a depth of a particular fluid. The most common choices are water; the pressure exerted by a column of liquid of height h and density ρ is given by the hydrostatic pressure equation p = ρgh, where g is the gravitational acceleration. Fluid density and local gravity can vary from one reading to another depending on local factors, so the height of a fluid column
Chemistry is the scientific discipline involved with elements and compounds composed of atoms and ions: their composition, properties and the changes they undergo during a reaction with other substances. In the scope of its subject, chemistry occupies an intermediate position between physics and biology, it is sometimes called the central science because it provides a foundation for understanding both basic and applied scientific disciplines at a fundamental level. For example, chemistry explains aspects of plant chemistry, the formation of igneous rocks, how atmospheric ozone is formed and how environmental pollutants are degraded, the properties of the soil on the moon, how medications work, how to collect DNA evidence at a crime scene. Chemistry addresses topics such as how atoms and molecules interact via chemical bonds to form new chemical compounds. There are four types of chemical bonds: covalent bonds, in which compounds share one or more electron; the word chemistry comes from alchemy, which referred to an earlier set of practices that encompassed elements of chemistry, philosophy, astronomy and medicine.
It is seen as linked to the quest to turn lead or another common starting material into gold, though in ancient times the study encompassed many of the questions of modern chemistry being defined as the study of the composition of waters, growth, disembodying, drawing the spirits from bodies and bonding the spirits within bodies by the early 4th century Greek-Egyptian alchemist Zosimos. An alchemist was called a'chemist' in popular speech, the suffix "-ry" was added to this to describe the art of the chemist as "chemistry"; the modern word alchemy in turn is derived from the Arabic word al-kīmīā. In origin, the term is borrowed from the Greek χημία or χημεία; this may have Egyptian origins since al-kīmīā is derived from the Greek χημία, in turn derived from the word Kemet, the ancient name of Egypt in the Egyptian language. Alternately, al-kīmīā may derive from χημεία, meaning "cast together"; the current model of atomic structure is the quantum mechanical model. Traditional chemistry starts with the study of elementary particles, molecules, metals and other aggregates of matter.
This matter can be studied in isolation or in combination. The interactions and transformations that are studied in chemistry are the result of interactions between atoms, leading to rearrangements of the chemical bonds which hold atoms together; such behaviors are studied in a chemistry laboratory. The chemistry laboratory stereotypically uses various forms of laboratory glassware; however glassware is not central to chemistry, a great deal of experimental chemistry is done without it. A chemical reaction is a transformation of some substances into one or more different substances; the basis of such a chemical transformation is the rearrangement of electrons in the chemical bonds between atoms. It can be symbolically depicted through a chemical equation, which involves atoms as subjects; the number of atoms on the left and the right in the equation for a chemical transformation is equal. The type of chemical reactions a substance may undergo and the energy changes that may accompany it are constrained by certain basic rules, known as chemical laws.
Energy and entropy considerations are invariably important in all chemical studies. Chemical substances are classified in terms of their structure, phase, as well as their chemical compositions, they can be analyzed using the tools of e.g. spectroscopy and chromatography. Scientists engaged in chemical research are known as chemists. Most chemists specialize in one or more sub-disciplines. Several concepts are essential for the study of chemistry; the particles that make up matter have rest mass as well – not all particles have rest mass, such as the photon. Matter can be a mixture of substances; the atom is the basic unit of chemistry. It consists of a dense core called the atomic nucleus surrounded by a space occupied by an electron cloud; the nucleus is made up of positively charged protons and uncharged neutrons, while the electron cloud consists of negatively charged electrons which orbit the nucleus. In a neutral atom, the negatively charged electrons balance out the positive charge of the protons.
The nucleus is dense. The atom is the smallest entity that can be envisaged to retain the chemical properties of the element, such as electronegativity, ionization potential, preferred oxidation state, coordination number, preferred types of bonds to form. A chemical element is a pure substance, composed of a single type of atom, characterized by its particular number of protons in the nuclei of its atoms, known as the atomic number and represented by the symbol Z; the mass number is the sum of the number of neutrons in a nucleus. Although all the nuclei of all atoms belonging to one element will have the same
Plastic is material consisting of any of a wide range of synthetic or semi-synthetic organic compounds that are malleable and so can be molded into solid objects. Plasticity is the general property of all materials which can deform irreversibly without breaking but, in the class of moldable polymers, this occurs to such a degree that their actual name derives from this specific ability. Plastics are organic polymers of high molecular mass and contain other substances, they are synthetic, most derived from petrochemicals, however, an array of variants are made from renewable materials such as polylactic acid from corn or cellulosics from cotton linters. Due to their low cost, ease of manufacture and imperviousness to water, plastics are used in a multitude of products of different scale, including paper clips and spacecraft, they have prevailed over traditional materials, such as wood, stone and bone, metal and ceramic, in some products left to natural materials. In developed economies, about a third of plastic is used in packaging and the same in buildings in applications such as piping, plumbing or vinyl siding.
Other uses include automobiles and toys. In the developing world, the applications of plastic may differ—42% of India's consumption is used in packaging. Plastics have many uses in the medical field as well, with the introduction of polymer implants and other medical devices derived at least from plastic; the field of plastic surgery is not named for use of plastic materials, but rather the meaning of the word plasticity, with regard to the reshaping of flesh. The world's first synthetic plastic was bakelite, invented in New York in 1907 by Leo Baekeland who coined the term'plastics'. Many chemists have contributed to the materials science of plastics, including Nobel laureate Hermann Staudinger, called "the father of polymer chemistry" and Herman Mark, known as "the father of polymer physics"; the success and dominance of plastics starting in the early 20th century led to environmental concerns regarding its slow decomposition rate after being discarded as trash due to its composition of large molecules.
Toward the end of the century, one approach to this problem was met with wide efforts toward recycling. The word plastic derives from the Greek πλαστικός meaning "capable of being shaped or molded" and, in turn, from πλαστός meaning "molded"; the plasticity, or malleability, of the material during manufacture allows it to be cast, pressed, or extruded into a variety of shapes, such as: films, plates, bottles, amongst many others. The common noun plastic should not be confused with the technical adjective plastic; the adjective is applicable to any material which undergoes a plastic deformation, or permanent change of shape, when strained beyond a certain point. For example, aluminum, stamped or forged exhibits plasticity in this sense, but is not plastic in the common sense. By contrast, some plastics will, in their finished forms, break before deforming and therefore are not plastic in the technical sense. Most plastics contain organic polymers; the vast majority of these polymers are formed from chains of carbon atoms,'pure' or with the addition of: oxygen, nitrogen, or sulfur.
The chains comprise many repeat units, formed from monomers. Each polymer chain will have several thousand repeating units; the backbone is the part of the chain, on the "main path", linking together a large number of repeat units. To customize the properties of a plastic, different molecular groups "hang" from this backbone; these pendant units are "hung" on the monomers, before the monomers themselves are linked together to form the polymer chain. It is the structure of these side chains; the molecular structure of the repeating unit can be fine tuned to influence specific properties in the polymer. Plastics are classified by: the chemical structure of the polymer's backbone and side chains. Plastics can be classified by: the chemical process used in their synthesis, such as: condensation and cross-linking. Plastics can be classified by: their various physical properties, such as: hardness, tensile strength, resistance to heat and glass transition temperature, by their chemical properties, such as the organic chemistry of the polymer and its resistance and reaction to various chemical products and processes, such as: organic solvents and ionizing radiation.
In particular, most plastics will melt upon heating to a few hundred degrees celsius. Other classifications are based on qualities that are relevant for product design. Examples of such qualities and classes are: thermoplastics and thermosets, conductive polymers, biodegradable plastics and engineering plastics and other plastics with particular structures, such as elastomers. One important classification of plastics is by the permanence or impermanence of their form, or whether they are: thermoplastics or thermosetting polymers. Thermoplastics are the plastics that, when heated, do not undergo chemical change in their composition and so can be molded again and again. Examples include: polyethylene, polypropylene and polyvinyl chloride. Common thermoplastics range from 20,000 to 500,000 amu, while thermosets are assumed to have infinite molecular weight. Thermosets, or thermosetting polymers, can melt and take shape only once: after they have solidified, they stay solid. In the thermosetting process, a chemical reaction occurs, irreversible.