Women's Test cricket
Women's Test cricket is the longest format of women's cricket and is the female equivalent to men's Test cricket. Matches comprise four-innings and are held over a maximum of four days between two of the leading cricketing nations; the rules governing the format differ little from those for the men's game, with differences being technicalities surrounding umpiring and field size. Far fewer women's Test matches are played each year than women's One Day Internationals, with the international calendar revolving around the shorter format of the game; the first women's Test match was played by England women and Australia women in December 1934, a three-day contest held in Brisbane which England won by nine wickets. Women's Test cricket is subject to the Laws of cricket, with a number of variations and refinements, which are set out in the ICC's "Women's Test match playing conditions" document. For the most part, these playing conditions are similar to those set out for men's Test cricket. Matches are played across up to four innings.
Test cricket can have three results: a draw, or one team wins. The primary, most noticeable, difference from the men's game is that women's Test matches are played over four days, rather than five. However, the players are expected to fit more overs in per hour in the women's game than the men's: 17 as opposed to 15, so a full day's play in a women's Test match should include 100 overs, rather than 90; the cricket field has smaller dimensions. As well as playing on a smaller field, the women use a smaller and lighter ball than their male counterparts; the Umpire Decision Review System is not available in women's Test matches, though umpires are permitted to ask the third umpire to check television replays in certain cases. In all, ten national women's teams have competed in Test cricket; the England team's tour of Australia and New Zealand in the 1934–35 season established the first three sides, it is those three teams that have competed in Test cricket most frequently. South Africa were the next side to play the format, contesting their first match in 1960.
However, due in part to their exclusion from international sport due to the nation's apartheid policy, they have only played in eleven Test matches, less than both India and the West Indies. Four sides — Pakistan, the Netherlands and Sri Lanka — have all competed in fewer than five Test matches; as of April 2019, there had only been one Women's Test match in the last three years, only two teams other than England and Australia had played in a Women's Test in the previous ten years. Australia's captain, Meg Lanning, expressed. Due to the infrequent playing of women's Test cricket outside of Australia and New Zealand, cumulative records, such as the most runs during a career, are dominated by players from those three nations. England's Jan Brittin has scored the most runs during her career, totalling 1,935 during her 27 matches, 18 of the top twenty players come from either Australia, England or New Zealand; the Australian batsman Denise Annetts, 15th on that list, has the highest batting average, 81.90, from her ten matches.
Annetts was involved in the largest partnership in women's Test cricket, sharing a stand of 309 runs with Lindsay Reeler in 1987. Seven women have scored double centuries in Test cricket. Mary Duggan, who played for England between 1949 and 1963 is the leading wicket-taker in women's Test cricket, claiming 77 wickets from 17 matches; the next most prolific bowler is Australia's Betty Wilson, who claimed her 68 wickets at the lowest bowling average, 11.80 and the first hat-trick in Women's Test cricket. Both of the players with the best bowling figures, in an innings and in a match, are from the Indian subcontinent. Amongst wicket-keepers, Christina Matthews has taken the most dismissals in her career, accumulating 46 catches and 12 stumpings during her 20 matches for Australia. Lisa Nye holds the record for the most dismissals in a single innings, having been responsible for eight of the ten wickets for England against New Zealand in 1992. Only two players have achieved the all-rounders double of scoring a century and taking ten wickets in the same match.
Wilson's performance was the first time such a feat had been achieved in Men's or Women's Tests and included the first hat-trick in Women's Tests. List of women's Test cricket grounds The Women's Ashes Women's One Day International cricket Women's Twenty20 International
Test cricket is the form of the sport of cricket with the longest duration, is considered the game's highest standard. Test matches are played between national representative teams with "Test status", as determined and conferred by the International Cricket Council; the term Test stems from the fact of the form's long, gruelling matches being both mentally and physically testing. Two teams of 11 players each play a four-innings match, it is considered the most complete examination of a team's endurance and ability. The first recognised Test match took place between 15 and 19 March 1877 and was played between England and Australia at the Melbourne Cricket Ground, where Australia won by 45 runs. A Test match to celebrate 100 years of Test cricket was held in Melbourne between 12 and 17 March 1977, in which Australia beat England by 45 runs—the same margin as that first Test. In October 2012, the ICC recast the playing conditions for Test matches, permitting day/night Test matches; the first day/night game took place between Australia and New Zealand at the Adelaide Oval, Adelaide, on 27 November – 1 December 2015.
Women's Test cricket is played over four days, with slight differences in format from men's Tests. Test matches are the highest level of cricket, statistically, their data form part of first-class cricket. Matches are played between national representative teams with "Test status", as determined by the International Cricket Council; as of June 2017, twelve national teams have Test status, the most promoted being Afghanistan and Ireland on 22 June 2017. Zimbabwe's Test status was voluntarily suspended, because of poor performances between 2006 and 2011. In January 2014, during an ICC meeting in Dubai, the pathway for new potential Test nations was laid out with the winners of the next round of the ICC Intercontinental Cup playing a 5-day match against the bottom ranked Test nation. If the Associate team defeats the Test nation they could be added as the new Test country and granted full membership. A list of matches, defined as "Tests", was first drawn up by Australian Clarence Moody in the mid-1890s.
Representative matches played by simultaneous England touring sides of 1891–92 and 1929–30 are deemed to have "Test status". In 1970, a series of five "Test matches" was played in England between England and a Rest of the World XI; these matches scheduled between England and South Africa, were amended after South Africa was suspended from international cricket because of their government's policy of apartheid. Although given Test status, this was withdrawn and a principle was established that official Test matches can only be between nations. Despite this, in 2005, the ICC ruled that the six-day Super Series match that took place in October 2005, between Australia and a World XI, was an official Test match; some cricket writers and statisticians, including Bill Frindall, ignored the ICC's ruling and excluded the 2005 match from their records. The series of "Test matches" played in Australia between Australia and a World XI in 1971–72 do not have Test status; the commercial "Supertests" organised by Kerry Packer as part of his World Series Cricket enterprise and played between "WSC Australia", "WSC World XI" and "WSC West Indies" from 1977 to 1979 have never been regarded as official Test matches.
There are twelve Test-playing men's teams. The teams all represent individual, independent nations, except for England, the West Indies and Ireland. Test status is conferred upon a group of countries by the International Cricket Council. Teams that do not have Test status can play in the ICC Intercontinental Cup designed to allow non-Test teams to play under conditions similar to Tests; the teams are listed below with the date of each team's Test debut: England Australia South Africa West Indies New Zealand India Pakistan Sri Lanka Zimbabwe Bangladesh Ireland Afghanistan In the mid 2010s, the ICC evaluated proposals for dividing Test cricket into two tiers, with promotion and relegation between Tier-1 and Tier-2. These proposals were opposed by others; these proposals were not implemented. A standard day of Test cricket consists of three sessions of two hours each, the breaks between sessions being 40 minutes for lunch and 20 minutes for tea; however the times of sessions and intervals may be altered in certain circumstances: if bad weather or a change of innings occurs close to a scheduled break, the break may be taken immediately.
Today, Test matches are scheduled to be played across five consecutive days
Order of the British Empire
The Most Excellent Order of the British Empire is a British order of chivalry, rewarding contributions to the arts and sciences, work with charitable and welfare organisations, public service outside the civil service. It was established on 4 June 1917 by King George V and comprises five classes across both civil and military divisions, the most senior two of which make the recipient either a knight if male or dame if female. There is the related British Empire Medal, whose recipients are affiliated with, but not members of, the order. Recommendations for appointments to the Order of the British Empire were made on the nomination of the United Kingdom, the self-governing Dominions of the Empire and the Viceroy of India. Nominations continue today from Commonwealth countries that participate in recommending British honours. Most Commonwealth countries ceased recommendations for appointments to the Order of the British Empire when they created their own honours; the five classes of appointment to the Order are, in descending order of precedence: Knight Grand Cross or Dame Grand Cross of the Most Excellent Order of the British Empire Knight Commander or Dame Commander of the Most Excellent Order of the British Empire Commander of the Most Excellent Order of the British Empire Officer of the Most Excellent Order of the British Empire Member of the Most Excellent Order of the British Empire The senior two ranks of Knight or Dame Grand Cross, Knight or Dame Commander, entitle their members to use the title of Sir for men and Dame for women before their forename.
Most members are citizens of the United Kingdom or the Commonwealth realms that use the Imperial system of honours and awards. Honorary knighthoods are appointed to citizens of nations where the Queen is not head of state, may permit use of post-nominal letters but not the title of Sir or Dame. Honorary appointees are, referred to as Sir or Dame – Bob Geldof, for example. Honorary appointees who become a citizen of a Commonwealth realm can convert their appointment from honorary to substantive enjoy all privileges of membership of the order, including use of the title of Sir and Dame for the senior two ranks of the Order. An example is Irish broadcaster Terry Wogan, appointed an honorary Knight Commander of the Order in 2005, on successful application for British citizenship, held alongside his Irish citizenship, was made a substantive member and subsequently styled as Sir Terry Wogan. King George V founded the Order to fill gaps in the British honours system: The Orders of the Garter, of St Patrick honoured royals, peers and eminent military commanders.
In particular, King George V wished to create an Order to honour many thousands of those who had served in a variety of non-combatant roles during the First World War. When first established, the Order had only one division. However, in 1918, soon after its foundation, it was formally divided into Military and Civil Divisions; the Order's motto is For the Empire. At the foundation of the Order, the'Medal of the Order of the British Empire' was instituted, to serve as a lower award granting recipients affiliation but not membership. In 1922, this was renamed the'British Empire Medal', it stopped being awarded by the United Kingdom as part of the 1993 reforms to the honours system, but was again awarded beginning in 2012, starting with 293 BEMs awarded for Queen Elizabeth II's Diamond Jubilee. In addition, the BEM is awarded by some other Commonwealth nations. In 2004, a report entitled "A Matter of Honour: Reforming Our Honours System" by a Commons committee recommended to phase out the Order of the British Empire, as its title was "now considered to be unacceptable, being thought to embody values that are no longer shared by many of the country's population".
The British monarch is Sovereign of the Order, appoints all other members of the Order. The next most senior member is the Grand Master, of whom there have been three: Prince Edward, the Prince of Wales; the Order is limited to 300 Knights and Dames Grand Cross, 845 Knights and Dames Commander, 8,960 Commanders. There are no limits applied to the total number of members of the fourth and fifth classes, but no more than 858 Officers and 1,464 Members may be appointed per year. Foreign appointees, as honorary members, do not contribute to the numbers restricted to the Order as full members do. Although the Order of the British Empire has by far the highest number of members of the British Orders of Chivalry, with over 100,000 living members worldwide, there are fewer appointments to knighthoods than in other orders. Though men can be knighted separately from an order of chivalry, women cannot, so the rank of Knight/Dame Commander of the Order is the lowest rank of damehood, second-lowest of knighthood.
Because of this, an appointment as Dame Commander is made in circumstances in which a man would be created a Knight Bachelor. For example, by convention, female judges of the High Court of Justice are created Dames Commander after appointment, while male judges
Batting average (cricket)
In cricket, a player's batting average is the total number of runs they have scored divided by the number of times they have been out. Since the number of runs a player scores and how they get out are measures of their own playing ability, independent of their teammates, batting average is a good metric for an individual player's skill as a batter; the number is simple to interpret intuitively. If all the batter's innings were completed, this is the average number of runs they score per innings. If they did not complete all their innings, this number is an estimate of the unknown average number of runs they score per innings; each player has several batting averages, with a different figure calculated for each type of match they play, a player's batting averages may be calculated for individual seasons or series, or at particular grounds, or against particular opponents, or across their whole career. Batting average has been used to gauge cricket players' relative skills since the 18th century.
Most players have career batting averages in the range of 20 to 40. This is the desirable range for wicket-keepers, though some fall short and make up for it with keeping skill; until a substantial increase in scores in the 21st century due to improved bats and smaller grounds among other factors, players who sustained an average above 50 through a career were considered exceptional, before the development of the heavy roller in the 1870s an average of 25 was considered good. All-rounders who are more prominent bowlers than batsmen average something between 20 and 30. 15 and under is typical for specialist bowlers. A small number of players have averaged less than 5 for a complete career, though a player with such an average is a liability unless an exceptional bowler as Alf Valentine, B. S. Chandrasekhar or Glenn McGrath were. Career records for batting average are subject to a minimum qualification of 20 innings played or completed, in order to exclude batsmen who have not played enough games for their skill to be reliably assessed.
Under this qualification, the highest Test batting average belongs to Australia's Sir Donald Bradman, with 99.94. Given that a career batting average over 50 is exceptional, that only five other players have averages over 60, this is an outstanding statistic; the fact that Bradman's average is so far above that of any other cricketer has led several statisticians to argue that, statistically at least, he was the greatest athlete in any sport. Disregarding this 20 innings qualification, the highest career test batting average is 112, by Andy Ganteaume, a Trinidadian Keeper-batsman, dismissed for 112 in his only test innings. Batting averages in One Day International cricket tend to be lower than in Test cricket, because of the need to score runs more and take riskier strokes and the lesser emphasis on building a large innings, it should be remembered in relation to the ODI histogram above, that there were no ODI competitions when Bradman played. If a batter has been dismissed in every single innings this statistic gives the average number of runs they score per innings.
However, for a batter with innings which finished not out, the true average number of runs they score per innings is unknown as it is not known how many runs they would have scored if they could have completed all their not out innings. This statistic is an estimate of the average number of runs. If their scores have a geometric distribution this statistic is the maximum likelihood estimate of their true unknown average. Batting averages can be affected by the number of not outs. For example, Phil Tufnell, noted for his poor batting, has an respectable ODI average of 15, despite a highest score of only 5 not out, as he scored an overall total of 15 runs from 10 innings, but was out only once. A batter who has not been dismissed in any of the innings over which their average is being calculated does not have a batting average, as dividing by zero does not give a result. Highest career batting averages in Test matches. Table shows players with at least 20 innings completed. * denotes not out. Last updated: 14 October 2018.
Highest career batting averages in First-class cricket as follows: Source: Cricinfo Statsguru. Table shows players with at least 50 innings batted, note this table has no requirement for minimum number of runs scored. * denotes not out. Last updated: 10 November 2018. Alternative measures of batting effectiveness have been developed, including: Strike rate measures a different concept to batting average – how the batter scores – so it does not supplant the role of batting average, it is used in limited overs matches, where the speed at which a batter scores is more important than it is in first-class cricket. A system of player rankings was developed to produce a better indication of players' current standings than is provided by comparing their averages. Cricket statistics Batting average Bowling average
A delivery or ball in cricket is a single action of bowling a cricket ball toward the batsman. During play of the game, a member of the fielding team is designated as the bowler, bowls deliveries toward the batsman. Six legal balls in a row constitutes an over, after which a different member of the fielding side takes over the role of bowler for the next over; the bowler delivers the ball from his or her end of the pitch toward the batsman standing at the opposite wicket at the other end of the pitch. Bowlers can be either right-handed; this approach to their delivery, in addition to their decision of bowling around the wicket or over the wicket, is knowledge of which the umpire and the batsman are to be made aware. Deliveries can be made by spin bowlers. Fast bowlers tend to make the ball either move off the pitch or move through the air, while spinners make the ball "turn" either toward a right-handed batsman or away from him; the ball can bounce at different distances from the batsman, this is called the length of the delivery.
It can range from a bouncer to a yorker. There are many different types of delivery; these deliveries vary by: technique, the hand the bowler bowls with, use of the fingers, use of the seam, how the ball is positioned in the hand, where the ball is pitched on the wicket, the speed of the ball, the tactical intent of the bowler. Leg spin deliveries and mirror equivalents for left arm unorthodox spin: Leg break Googly Topspinner Flipper Slider Flicker ball Off spin deliveries and mirror equivalents for left arm orthodox spin: Off break Doosra Arm ball Topspinner Carrom ball Teesra Fast bowling deliveries: Bouncer Inswinger Reverse swing Leg cutter Off cutter Outswinger Yorker Beamer Knuckleball Slower ball The variations in different types of delivery, as well as variations caused by directing the ball with differing line and length, are key weapons in a bowler's arsenal. Throughout an over, the bowler will choose a sequence of deliveries designed to attack the batsman's concentration and technique, in an effort to get him out.
The bowler varies the amount of loop and pace imparted to various deliveries to try to cause the batsman to misjudge and make a mistake. As the crease has a width, the bowler can change the angle from which he delivers to the batsman in an attempt to induce a misjudgement; the bowler decides what type of delivery to bowl next, without consultation or informing any other member of his team. Sometimes, the team captain will offer advice or issue a direct order regarding what deliveries to bowl, based on his observations of the batsman and the strategic state of the game. Another player who offers advice to the bowler is the wicket-keeper, since he has a unique view of the batsman and may be able to spot weaknesses of technique. Another piece of information important for the bowlers to consider prior to their deliveries is the state of pitch; the pitch is a natural ground and its state is subjected to variation over the course of the cricket, some of which are multi-day events such as test matches.
Spinners find an old pitch, one, used, more suitable to their deliveries rather than a fresh pitch, one that hasn't come under use as much such as a pitch at the start of the match. While a bowler, with the use of variations in his/her delivery aims to target the concentration of batsmen as well as their skill and technique of batting, anticipation of the delivery is crucial for the batsman, as emphasised by Jodi Richardson. Richardson reveals the world class batsman's dilemma while facing fast bowlers, stating that the time between the batsmen's anticipation of the trajectory of the ball and positioning themselves for the appropriate shot can be twice as long as the interval between the ball leaving the bowler's hand and reaching the batsman's crease. Side by side, Richardson alludes to the research undertaken by Dr. Sean Müller in Australia, funded by Cricket Australia's Centre of Excellence; the results of the research demonstrated the importance of anticipation of the delivery for batsmen in cricket.
They revealed that experienced batsmen possessed a unique ability which enabled them to adjust their feet as well as their positioning on the crease accordingly based upon their reading of the body language and movements enacted by the bowler prior to the release of the ball. This foresight that batsmen use while on the crease is referred to as'advance information' by Richardson. Moreover, Müller's research outlined that the presence of this'advance information' was not as evident among the lesser skilled batsmen in comparison to the experienced ones. Underarm or lob bowling was the original cricket delivery style,but had died out before the 20th century, although it was used until 1910 by George Simpson-Hayward, remained a legal delivery type. On 1 February 1981, when Australia was playing New Zealand in a One Day International cricket match, New Zealand needed six runs to tie the match from the final ball. Greg Chappell, the Australian captain, ordered the bowler to bowl underarm, rolling the ball along the ground to prevent the Number 10 New Zealand batsman any chance of hitting a six from the last ball to tie the match.
After the game, the Prime Minister of New Zealand, Rob Muldoon, described it as "the most disgusting incident I can recall in the history of cricket." At the time, underarm deliveries were legal, but as a direct result of the incident, underarm bowling was banned in limi
In cricket, the term wicket has several meanings. Firstly, it is one of two bails at either end of the pitch; the wicket is guarded by a batsman who, with his bat, attempts to prevent the ball from hitting the wicket. Secondly, through metonymic usage, the dismissal of a batsman is known as the taking of a wicket, thirdly, the cricket pitch itself is sometimes called the wicket; the origin of the word is from a small gate. Cricket wickets had only two stumps and one bail and looked like a gate; the third stump was introduced in 1775. The size and shape of the wicket has changed several times during the last 300 years and its dimensions and placing is now determined by Law 8 in the Laws of Cricket, thus: Law 8: The wickets; the wicket consists of three wooden stumps. The stumps are placed along the batting crease with equal distances between each stump, they are positioned. Two wooden bails are placed in shallow grooves on top of the stumps; the bails must not project more than 0.5 inches above the stumps, must, for men's cricket, be 4.31 inches long.
There are specified lengths for the barrel and spigots of the bail. There are different specifications for the bails for junior cricket; the umpires may dispense with the bails. Further details on the specifications of the wickets are contained in Appendix D to the laws. For a batsman to be dismissed by being bowled, run out, stumped or hit wicket, his wicket needs to be put down. What this means is defined by Law 29. A wicket is put down if a bail is removed from the top of the stumps, or a stump is struck out of the grounds by the ball, the striker's bat, the striker's person, a fielder. A 2010 amendment to the Laws clarified the rare circumstance where a bat breaks during the course of a shot and the detached debris breaks the wicket; the wicket is put down if a fielder pulls a stump out of the ground in the same manner. If one bail is off, removing the remaining bail or striking or pulling any of the three stumps out of the ground is sufficient to put the wicket down. A fielder may remake the wicket, if necessary, in order to put it down to have an opportunity of running out a batsman.
If however both bails are off, a fielder must remove one of the three stumps out of the ground with the ball, or pull it out of the ground with a hand or arm, provided that the ball is held in the hand or hands so used, or in the hand of the arm so used. If the umpires have agreed to dispense with bails, for example, it is too windy for the bails to remain on the stumps, the decision as to whether the wicket has been put down is one for the umpire concerned to decide. After a decision to play without bails, the wicket has been put down if the umpire concerned is satisfied that the wicket has been struck by the ball, by the striker's bat, person, or items of his clothing or equipment separated from his person as described above, or by a fielder with the hand holding the ball or with the arm of the hand holding the ball; the dismissal of a batsman is known as the taking of a wicket. The batsman is said to have lost his wicket, the batting side is said to have lost a wicket, the fielding side to have taken a wicket, the bowler is said to have taken his wicket, if the dismissal is one of the types for which the bowler receives credit.
This language is used if the dismissal did not involve the stumps and bails in any way, for example, a catch. Though note that the other four of the five most common methods of dismissal do involve the stumps and bails being put down, or prevented from being put down by the batsman; the word wicket has this meaning in the following contexts: A team's score is described in terms of the total number of runs scored and the total number of wickets lost. The number of wickets taken is a primary measure of a individual bowler's ability, a key part of a bowling analysis; the sequence of time over which two particular batsmen bat together, a partnership, is referred to as a numbered wicket when discriminating it from other partnerships in the innings. The first wicket partnership is from the start of the innings until the team loses its first wicket, i.e. one of the first two batsmen is dismissed. The second wicket partnership is from when the third batsman starts batting until the team loses its second wicket, i.e. a second batsman is dismissed.
Etc... The tenth wicket or last wicket partnership is from when the eleventh batsman starts batting until the team loses its tenth wicket, i.e. a tenth batsman is dismissed. A team can win a match by a certain number of wickets; this means that they were batting last, reached the winning target with a certain number of batsmen still not dismissed. For example, if the side scored the required number of runs to win with only three batsmen dismissed, they are said to have won by seven wickets; the word wicket is sometimes used to refer to the cricket pitch itself. According to the Laws of Cricket, this usage is incorrect, but it is in common usage and understood by cricket followers; the term sticky wicket refers to a situation in which the pitch has become damp due to rain or high humidity. This makes the path of the ball more unpredictable thus making the
Women's cricket is the form of the team sport of cricket, played by women. The first recorded match was in England on 26 July 1745; the first recorded match of women's cricket was reported in The Reading Mercury on 26 July 1745, a match contested "between eleven maids of Bramley and eleven maids of Hambledon, all dressed in white." The first known women's cricket club was formed in 1887 in Yorkshire, named the White Heather Club. Three years a team known as the Original English Lady Cricketers toured England making substantial profits before their manager absconded with the money. In Australia, a women's cricket league was set up in 1894, while in South Africa, Port Elizabeth had a women's cricket team, the Pioneers Cricket Club. In Canada, Victoria had a women's cricket team that played at Beacon Hill Park. In 1958 the International Women's Cricket Council was formed to co-ordinate women's cricket around the world, taking over from the English Women's Cricket Association, doing the same job in a de facto role since its creation 32 years earlier.
In 2005, the IWCC was merged with the International Cricket Council to form one unified body to help manage and develop cricket. Women's cricket has been played internationally since the inaugural women's Test match between England women and Australia women in December 1934; the following year, New Zealand women joined them, in 2007 Netherlands women became the tenth women's Test nation when they made their debut against South Africa women. Since 1973, women's One Day Internationals have been contested, these became the focus of women's international cricket. In the years since the inception of women's ODIs more than eight times more of this format has been played than women's Test cricket; the Women's Cricket World Cup has been held nine times, with Australia and New Zealand sharing the titles. In 2004, a shorter format still was introduced, with the introduction of women's Twenty20 International. Women's Twenty20 cricket was played little at international level, with only four matches played by the end of 2006.
However, the following three years saw a rapid growth, with six matches been played in 2007, ten in 2008 and thirty in 2009, which saw the first ICC Women's World Twenty20. Since 2015, women have played franchise ticket in the Australian Women's Big Bash League. In 2016, the semi-professional Women's Cricket Super League formed in Wales. List of women ODI cricketers List of women Test cricketers List of women Twenty20 International cricketers Cricket Cricinfo Women