Suffolk County, New York
Suffolk County is a predominantly suburban county on Long Island and the easternmost county in the U. S. state of New York. As of the 2010 census, the county's population was 1,493,350, estimated to have decreased to 1,492,953 in 2017, making it the fourth-most populous county in New York, its county seat is Riverhead. The county was named after the county of Suffolk in England, from where its earliest European settlers came. Suffolk County incorporates the easternmost extreme of the New York City metropolitan area; the largest of Long Island's four counties and the second-largest of 62 counties in New York State, Suffolk measures 86 miles in length and 26 miles in width at its widest. Major scientific research facilities in Suffolk County include Brookhaven National Laboratory in Upton, Cold Spring Harbor Laboratory in Huntington, Plum Island Animal Disease Center on Plum Island. Suffolk County was part of the Connecticut Colony before becoming an original county of the Province of New York, one of twelve created in 1683.
From 1664 until 1683 it had been the East Riding of Yorkshire. Its boundaries were the same as at present, with only minor changes in the boundary with its western neighbor, Queens County but has been Nassau County since the separation of Nassau from Queens in 1899. According to the Suffolk County website, the county is the leading agricultural county in the state of New York, saying that: "The weather is temperate, clean water is abundant, the soil is so good that Suffolk is the leading agricultural county in New York State; that Suffolk is still number one in farming with the development that has taken place, is a tribute to thoughtful planning, along with the excellent soil, favorable weather conditions, the work of dedicated farmers in this region." According to the U. S. Census Bureau, the county has an area of 2,373 square miles, of which 912 square miles is land and 1,461 square miles is water, it is the second-largest county in New York by total area and occupies 66% of the land area of Long Island.
Suffolk County occupies the central and eastern part of Long Island, in the extreme east of New York State. The eastern end of the county splits into two peninsulas, known as the North Fork and the South Fork; the county is surrounded by water on three sides, including the Atlantic Ocean and Long Island Sound, with 980 miles of coastline. The eastern end contains large bays; the highest elevation in the county, on Long Island as a whole, is Jayne's Hill in West Hills, at 401 feet above sea level. Nassau County, New York - west Fairfield County, Connecticut - northwest New Haven County, Connecticut - north Middlesex County, Connecticut - north New London County, Connecticut - north Washington County, Rhode Island - northeast Amagansett National Wildlife Refuge Conscience Point National Wildlife Refuge Elizabeth A. Morton National Wildlife Refuge Fire Island National Seashore Sayville National Wildlife Refuge Seatuck National Wildlife Refuge Target Rock National Wildlife Refuge Wertheim National Wildlife Refuge As of the census of 2010, there were 1,493,350 people and 569,985 households residing in the county.
The population of Suffolk County was estimated by the U. S. Census to have decreased to 1,492,953 in 2017, representing 7.5% of the Census-estimated New York State population of 19,849,399 and 19.0% of the Census-estimated Long Island population of 7,869,820. The population density in 2010 was 1,637 people per square mile, with 569,985 households at an average density of 625 per square mile. However, by 2012, with an estimated total population increasing moderately to 1,499,273 there were 569,359 housing units. By 2014, the racial makeup of the county was estimated at 85.2% White of any ancestry including Hispanic, 8.3% African American, 0.6% Native American, 4.0% Asian, 0.1% Pacific Islander, 1.8% from two or more races. Hispanic or Latino of any race were 18.2% of the population. Those who identified as "white alone", not being of Hispanic or Latino origin, represented 69.3% of the population. In 2006, the racial or ethnic makeup of the county was 83.6% White. African Americans were 7.4% of the population.
Asians stood at 3.4% of the population. 5.4 % were of mixed race. Latinos were 13.0% of the population. The most common ethnicities in Suffolk County in 2007 were Italian and German. In 2002, The New York Times cited a study by the non-profit group ERASE Racism, which determined Suffolk and its neighboring county, Nassau, to be the most racially segregated suburbs in the United States. In 2006, there were 469,299 households, out of which 37.00% had children under the age of 18 living with them, 62.00% were married couples living together, 10.80% had a female householder with no husband present, 23.20% were non-families. 18.30% of all households were made up of individuals and 7.80% had someone living alone, 65 years of age or older. The average household size was 2.96 and the average family size was 3.36. In the county, the population was spread out with 26.10% under the age of 18, 7.60% from 18 to 24, 31.20% from 25 to 44, 23.30% from 45 to 64, 11.80% who were 65 years of age or older. The median age was 36 years.
For every 100 females, there were 95.90 males. For every 100 females age 18 and over, there were 92.80 males. In 2008, Forbes magazine released its American Community Survey and named Suffolk County number 4 in its list of the top 25 richest counties in America. In 2016, according to Business Insider, the 11962 zip code encompassing Sagaponack, within Southampton, was listed as the most expensive in the U. S. with a median home sale price of $8
A census is the procedure of systematically acquiring and recording information about the members of a given population. The term is used in connection with national population and housing censuses; the United Nations defines the essential features of population and housing censuses as "individual enumeration, universality within a defined territory and defined periodicity", recommends that population censuses be taken at least every 10 years. United Nations recommendations cover census topics to be collected, official definitions and other useful information to co-ordinate international practice; the word is of Latin origin: during the Roman Republic, the census was a list that kept track of all adult males fit for military service. The modern census is essential to international comparisons of any kind of statistics, censuses collect data on many attributes of a population, not just how many people there are. Censuses began as the only method of collecting national demographic data, are now part of a larger system of different surveys.
Although population estimates remain an important function of a census, including the geographic distribution of the population, statistics can be produced about combinations of attributes e.g. education by age and sex in different regions. Current administrative data systems allow for other approaches to enumeration with the same level of detail but raise concerns about privacy and the possibility of biasing estimates. A census can be contrasted with sampling in which information is obtained only from a subset of a population. Modern census data are used for research, business marketing, planning, as a baseline for designing sample surveys by providing a sampling frame such as an address register. Census counts are necessary to adjust samples to be representative of a population by weighting them as is common in opinion polling. Stratification requires knowledge of the relative sizes of different population strata which can be derived from census enumerations. In some countries, the census provides the official counts used to apportion the number of elected representatives to regions.
In many cases, a chosen random sample can provide more accurate information than attempts to get a population census. A census is construed as the opposite of a sample as its intent is to count everyone in a population rather than a fraction. However, population censuses rely on a sampling frame to count the population; this is the only way to be sure that everyone has been included as otherwise those not responding would not be followed up on and individuals could be missed. The fundamental premise of a census is that the population is not known and a new estimate is to be made by the analysis of primary data; the use of a sampling frame is counterintuitive as it suggests that the population size is known. However, a census is used to collect attribute data on the individuals in the nation; this process of sampling marks the difference between historical census, a house to house process or the product of an imperial decree, the modern statistical project. The sampling frame used by census is always an address register.
Thus it is not known how many people there are in each household. Depending on the mode of enumeration, a form is sent to the householder, an enumerator calls, or administrative records for the dwelling are accessed; as a preliminary to the dispatch of forms, census workers will check any address problems on the ground. While it may seem straightforward to use the postal service file for this purpose, this can be out of date and some dwellings may contain a number of independent households. A particular problem is what are termed'communal establishments' which category includes student residences, religious orders, homes for the elderly, people in prisons etc; as these are not enumerated by a single householder, they are treated differently and visited by special teams of census workers to ensure they are classified appropriately. Individuals are counted within households and information is collected about the household structure and the housing. For this reason international documents refer to censuses of housing.
The census response is made by a household, indicating details of individuals resident there. An important aspect of census enumerations is determining which individuals can be counted from which cannot be counted. Broadly, three definitions can be used: de facto residence; this is important to consider individuals who have temporary addresses. Every person should be identified uniquely as resident in one place but where they happen to be on Census Day, their de facto residence, may not be the best place to count them. Where an individual uses services may be more useful and this is at their usual, or de jure, residence. An individual may be represented at a permanent address a family home for students or long term migrants, it is necessary to have a precise definition of residence to decide whether visitors to a country should be included in the population count. This is becoming more important as students travel abroad for education for a period of several years. Other groups causing problems of enumeration are new born babies, people away on holiday, people moving home around census day, people without a fixed address.
People having second homes because of working in another part of the country or retaining a holiday cottage are dif
Administrative divisions of New York (state)
The administrative divisions of New York are the various units of government that provide local government services in the state of New York. The state is divided into counties, cities and villages. Cities and villages are municipal corporations with their own governments that provide most local government services. Whether a municipality is defined as a city, town, or village is dependent not on population or land area, but rather on the form of government selected by the residents and approved by the state legislature; each such government is granted varying home rule powers as provided by the New York Constitution. New York has various corporate entities that serve single purposes that are local governments, such as school and fire districts. New York has 62 counties, which are subdivided into 62 cities. In total, the state has more than 3,400 active local governments and more than 4,200 taxing jurisdictions. Counties and incorporated municipal governments in New York State have been granted broad home rule powers enabling them to provide services to their residents and to regulate the quality of life within their jurisdictions.
They do so while adhering to the United States Constitution and the Constitution of the State of New York. Articles VIII and IX of the state constitution establish the rights and responsibilities of the municipal governments; the New York State Constitution provides for democratically elected legislative bodies for counties, cities and villages. These legislative bodies are granted the power to enact local laws as needed in order to provide services to their citizens and fulfill their various obligations; the county is the primary administrative division of New York. There are sixty-two counties in the state. Five of the counties are boroughs of the city of New York and do not have functioning county governments. While created as subdivisions of the state meant to carry out state functions, counties are now considered municipal corporations with the power and fiscal capacity to provide an array of local government services; such services include law enforcement and public safety and health services, education.
Every county outside of New York City has a county seat, the location of county government. Nineteen counties operate under county charters, while 38 operate under the general provisions of the County Law. Although all counties have a certain latitude to govern themselves, "charter counties" are afforded greater home rule powers; the charter counties are Albany, Chautauqua, Dutchess, Herkimer, Nassau, Onondaga, Putnam, Rockland, Suffolk, Tompkins and Westchester. Sixteen counties are governed through an assembly with the power of a board of supervisors, composed of the supervisors of its constituent towns and cities. In most of these counties, each supervisor's vote is weighted in accordance with the town's population in order to abide by the U. S. Supreme Court mandate of "one person, one vote". Other counties have legislative districts of equal population. Most counties in New York do not use the term "Board of Supervisors." 34 counties have a County Legislature, six counties have a Board of Legislators, one county has a Board of Representatives.
The five counties, or boroughs, of New York City are governed by a 51-member City Council. In non-charter counties, the legislative body exercises executive power as well. Although the legislature can delegate certain functions and duties to a county administrator, who acts on behalf of the legislature, the legislature must maintain ultimate control over the actions of the administrator. Many, but not all, charter counties have an elected executive, independent of the legislature. In New York, each city is a autonomous incorporated area that, with the exceptions of New York City and Geneva, is contained within one county. Cities in New York are classified by the U. S. Census Bureau as incorporated places, they provide all services to their residents and have the highest degree of home rule and taxing jurisdiction over their residents. The main difference between a city and a village is that cities are organized and governed according to their charters, which can differ among cities, while most villages are subject to a uniform statewide Village Law.
Villages are part of a town, with residents who pay taxes to and receive services from the town. Cities are neither part of nor subordinate to towns except for the city of Sherrill, which for some purposes is treated as if it were a village of the town of Vernon; some cities are surrounded by a town of the same name. There are sixty-two cities in the state; as of 2000, 54.1% of state residents were living in a city. In 1686, the English colonial governor granted the cities of New York and Albany city charters, which were recognized by the first State Constitution in 1777. All other cities have been established by act of the state legislature and have been granted a charter. Cities have been granted the power to revise the
Population density is a measurement of population per unit area or unit volume. It is applied to living organisms, most of the time to humans, it is a key geographical term. In simple terms population density refers to the number of people living in an area per kilometer square. Population density is population divided by total land water volume, as appropriate. Low densities may lead to further reduced fertility; this is called the Allee effect after the scientist. Examples of the causes in low population densities include: Increased problems with locating sexual mates Increased inbreeding For humans, population density is the number of people per unit of area quoted per square kilometer or square mile; this may be calculated for a county, country, another territory or the entire world. The world's population is around 7,500,000,000 and Earth's total area is 510,000,000 square kilometers. Therefore, the worldwide human population density is around 7,500,000,000 ÷ 510,000,000 = 14.7 per km2. If only the Earth's land area of 150,000,000 km2 is taken into account human population density is 50 per km2.
This includes all continental and island land area, including Antarctica. If Antarctica is excluded population density rises to over 55 people per km2. However, over half of the Earth's land mass consists of areas inhospitable to human habitation, such as deserts and high mountains, population tends to cluster around seaports and fresh-water sources. Thus, this number by itself does not give any helpful measurement of human population density. Several of the most densely populated territories in the world are city-states and dependencies; these territories have a small area and a high urbanization level, with an economically specialized city population drawing on rural resources outside the area, illustrating the difference between high population density and overpopulation The potential to maintain the agricultural aspects of deserts is limited as there is not enough precipitation to support a sustainable land. The population in these areas are low. Therefore, cities in the Middle East, such as Dubai, have been increasing in population and infrastructure growth at a fast pace.
Cities with high population densities are, by some, considered to be overpopulated, though this will depend on factors like quality of housing and infrastructure and access to resources. Most of the most densely populated cities are in Southeast Asia, though Cairo and Lagos in Africa fall into this category. City population and area are, however dependent on the definition of "urban area" used: densities are invariably higher for the central city area than when suburban settlements and the intervening rural areas are included, as in the areas of agglomeration or metropolitan area, the latter sometimes including neighboring cities. For instance, Milwaukee has a greater population density when just the inner city is measured, the surrounding suburbs excluded. In comparison, based on a world population of seven billion, the world's inhabitants, as a loose crowd taking up ten square feet per person, would occupy a space a little larger than Delaware's land area; the Gaza Strip has a population density of 5,046 pop/km.
Although arithmetic density is the most common way of measuring population density, several other methods have been developed to provide a more accurate measure of population density over a specific area. Arithmetic density: The total number of people / area of land Physiological density: The total population / area of arable land Agricultural density: The total rural population / area of arable land Residential density: The number of people living in an urban area / area of residential land Urban density: The number of people inhabiting an urban area / total area of urban land Ecological optimum: The density of population that can be supported by the natural resources Demography Human geography Idealized population Optimum population Population genetics Population health Population momentum Population pyramid Rural transport problem Small population size Distance sampling List of population concern organizations List of countries by population density List of cities by population density List of city districts by population density List of English districts by population density List of European cities proper by population density List of United States cities by population density List of islands by population density List of U.
S. states by population density List of Australian suburbs by population density Selected Current and Historic City, Ward & Neighborhood Density Duncan Smith / UCL Centre for Advanced Spatial Analysis. "World Population Density". Exploratory map shows data from the Global Human Settlement Layer produced by the European Commission JRC and the CIESIN Columbia University
A ZIP Code is a postal code used by the United States Postal Service in a system it introduced in 1963. The term ZIP is an acronym for Zone Improvement Plan; the basic format consists of five digits. An extended ZIP+4 code was introduced in 1983 which includes the five digits of the ZIP Code, followed by a hyphen and four additional digits that reference a more specific location; the term ZIP Code was registered as a servicemark by the U. S. Postal Service, but its registration has since expired; the early history and context of postal codes began with postal district/zone numbers. The United States Post Office Department implemented postal zones for numerous large cities in 1943. For example: The "16" was the number of the postal zone in the specific city. By the early 1960s, a more organized system was needed, non-mandatory five-digit ZIP Codes were introduced nationwide on July 1, 1963; the USPOD issued its Publication 59: Abbreviations for Use with ZIP Code on October 1, 1963, with the list of two-letter state abbreviations which are written with both letters capitalized.
An earlier list in June had proposed capitalized abbreviations ranging from two to five letters. According to Publication 59, the two-letter standard was "based on a maximum 23-position line, because this has been found to be the most universally acceptable line capacity basis for major addressing systems", which would be exceeded by a long city name combined with a multi-letter state abbreviation, such as "Sacramento, Calif." along with the ZIP Code. The abbreviations have remained unchanged, with the exception of Nebraska, changed from NB to NE in 1969 at the request of the Canadian postal administration, to avoid confusion with the Canadian province of New Brunswick. Robert Moon is considered the father of the ZIP Code; the post office only credits Moon with the first three digits of the ZIP Code, which describe the sectional center facility or "sec center." An SCF is a central mail processing facility with those three digits. The fourth and fifth digits, which give a more precise locale within the SCF, were proposed by Henry Bentley Hahn Sr.
The SCF sorts mail to all post offices with those first three digits in their ZIP Codes. The mail is sorted according to the final two digits of the ZIP Code and sent to the corresponding post offices in the early morning. Sectional centers do not deliver mail and are not open to the public, most of their employees work the night shift. Mail picked up at post offices is sent to their own SCF in the afternoon, where the mail is sorted overnight. In the case of large cities, the last two digits coincide with the older postal zone number thus: In 1967, these became mandatory for second- and third-class bulk mailers, the system was soon adopted generally; the United States Post Office used a cartoon character, which it called Mr. ZIP, to promote the use of the ZIP Code, he was depicted with a legend such as "USE ZIP CODE" in the selvage of panes of postage stamps or on the covers of booklet panes of stamps. In 1971 Elmira Star-Gazette reporter Dick Baumbach found out the White House was not using a ZIP Code on its envelopes.
Herb Klein, special assistant to President Nixon, responded by saying the next printing of envelopes would include the ZIP Code. In 1983, the U. S. Postal Service introduced an expanded ZIP Code system that it called ZIP+4 called "plus-four codes", "add-on codes", or "add-ons". A ZIP+4 Code uses the basic five-digit code plus four additional digits to identify a geographic segment within the five-digit delivery area, such as a city block, a group of apartments, an individual high-volume receiver of mail, a post office box, or any other unit that could use an extra identifier to aid in efficient mail sorting and delivery. However, initial attempts to promote universal use of the new format met with public resistance and today the plus-four code is not required. In general, mail is read by a multiline optical character reader that instantly determines the correct ZIP+4 Code from the address—along with the more specific delivery point—and sprays an Intelligent Mail barcode on the face of the mail piece that corresponds to 11 digits—nine for the ZIP+4 Code and two for the delivery point.
For Post Office Boxes, the general rule is. The add-on code is one of the following: the last four digits of the box number, zero plus the last three digits of the box number, or, if the box number consists of fewer than four digits, enough zeros are attached to the front of the box number to produce a four-digit number. However, there is no uniform rule, so the ZIP+4 Code must be looked up individually for each box; the ZIP Code is translated into an Intelligent Mail barcode, printed on the mailpiece to make it easier for automated machines to sort. A barcode can be printed by the sender, it is better to let the post office put one on. In general, the post office uses OCR technology, though in some cases a human might have to read and enter the address. Customers who send bulk mail can get a discount on postage if they have printed the barcode themselves and have presorted the mai
Shelter Island Heights Historic District
Shelter Island Heights Historic District is a national historic district located at Shelter Island Heights in Suffolk County, New York. There are one contributing structures, it was added to the National Register of Historic Places in 1993. The Heights
Per capita income
Per capita income or average income measures the average income earned per person in a given area in a specified year. It is calculated by dividing the area's total income by its total population. Per capita income is national income divided by population size. Per capita income is used to measure an area's average income and compare the wealth of different populations. Per capita income is used to measure a country's standard of living, it is expressed in terms of a used international currency such as the euro or United States dollar, is useful because it is known, is calculable from available gross domestic product and population estimates, produces a useful statistic for comparison of wealth between sovereign territories. This helps to ascertain a country's development status, it is one of the three measures for calculating the Human Development Index of a country. In the United States, it is defined by the U. S. Census Bureau as the following: "Per capita income is the mean money income received in the past 12 months computed for every man and child in a geographic area."
Critics claim that per capita income has several weaknesses in measuring prosperity: Comparisons of per capita income over time need to consider inflation. Without adjusting for inflation, figures tend to overstate the effects of economic growth. International comparisons can be distorted by cost of living differences not reflected in exchange rates. Where the objective is to compare living standards between countries, adjusting for differences in purchasing power parity will more reflect what people are able to buy with their money, it does not reflect income distribution. If a country's income distribution is skewed, a small wealthy class can increase per capita income while the majority of the population has no change in income. In this respect, median income is more useful when measuring of prosperity than per capita income, as it is less influenced by outliers. Non-monetary activity, such as barter or services provided within the family, is not counted; the importance of these services varies among economies.
Per capita income does not consider whether income is invested in factors to improve the area's development, such as health, education, or infrastructure. List of countries by average wage List of countries by GDP per capita—GDP at market or government official exchange rates per inhabitant List of countries by GDP per capita—GDP calculated at purchasing power parity exchange per inhabitant List of countries by GNI per capita List of countries by GNI per capita List of countries by income equality Total personal income