United States Census Bureau
The United States Census Bureau is a principal agency of the U. S. Federal Statistical System, responsible for producing data about the American people and economy; the Census Bureau is part of the U. S. Department of Commerce and its director is appointed by the President of the United States; the Census Bureau's primary mission is conducting the U. S. Census every ten years, which allocates the seats of the U. S. House of Representatives to the states based on their population; the Bureau's various censuses and surveys help allocate over $400 billion in federal funds every year and it helps states, local communities, businesses make informed decisions. The information provided by the census informs decisions on where to build and maintain schools, transportation infrastructure, police and fire departments. In addition to the decennial census, the Census Bureau continually conducts dozens of other censuses and surveys, including the American Community Survey, the U. S. Economic Census, the Current Population Survey.
Furthermore and foreign trade indicators released by the federal government contain data produced by the Census Bureau. Article One of the United States Constitution directs the population be enumerated at least once every ten years and the resulting counts used to set the number of members from each state in the House of Representatives and, by extension, in the Electoral College; the Census Bureau now conducts a full population count every 10 years in years ending with a zero and uses the term "decennial" to describe the operation. Between censuses, the Census Bureau makes population projections. In addition, Census data directly affects how more than $400 billion per year in federal and state funding is allocated to communities for neighborhood improvements, public health, education and more; the Census Bureau is mandated with fulfilling these obligations: the collecting of statistics about the nation, its people, economy. The Census Bureau's legal authority is codified in Title 13 of the United States Code.
The Census Bureau conducts surveys on behalf of various federal government and local government agencies on topics such as employment, health, consumer expenditures, housing. Within the bureau, these are known as "demographic surveys" and are conducted perpetually between and during decennial population counts; the Census Bureau conducts economic surveys of manufacturing, retail and other establishments and of domestic governments. Between 1790 and 1840, the census was taken by marshals of the judicial districts; the Census Act of 1840 established a central office. Several acts followed that revised and authorized new censuses at the 10-year intervals. In 1902, the temporary Census Office was moved under the Department of Interior, in 1903 it was renamed the Census Bureau under the new Department of Commerce and Labor; the department was intended to consolidate overlapping statistical agencies, but Census Bureau officials were hindered by their subordinate role in the department. An act in 1920 changed the date and authorized manufacturing censuses every two years and agriculture censuses every 10 years.
In 1929, a bill was passed mandating the House of Representatives be reapportioned based on the results of the 1930 Census. In 1954, various acts were codified into Title 13 of the US Code. By law, the Census Bureau must count everyone and submit state population totals to the U. S. President by December 31 of any year ending in a zero. States within the Union receive the results in the spring of the following year; the United States Census Bureau defines four statistical regions, with nine divisions. The Census Bureau regions are "widely used...for data collection and analysis". The Census Bureau definition is pervasive. Regional divisions used by the United States Census Bureau: Region 1: Northeast Division 1: New England Division 2: Mid-Atlantic Region 2: Midwest Division 3: East North Central Division 4: West North Central Region 3: South Division 5: South Atlantic Division 6: East South Central Division 7: West South Central Region 4: West Division 8: Mountain Division 9: Pacific Many federal, state and tribal governments use census data to: Decide the location of new housing and public facilities, Examine the demographic characteristics of communities and the US, Plan transportation systems and roadways, Determine quotas and creation of police and fire precincts, Create localized areas for elections, utilities, etc.
Gathers population information every 10 years The United States Census Bureau is committed to confidentiality, guarantees non-disclosure of any addresses or personal information related to individuals or establishments. Title 13 of the U. S. Code establishes penalties for the disclosure of this information. All Census employees must sign an affidavit of non-disclosure prior to employment; the Bureau cannot share responses, addresses or personal information with anyone including United States or foreign government
A census is the procedure of systematically acquiring and recording information about the members of a given population. The term is used in connection with national population and housing censuses; the United Nations defines the essential features of population and housing censuses as "individual enumeration, universality within a defined territory and defined periodicity", recommends that population censuses be taken at least every 10 years. United Nations recommendations cover census topics to be collected, official definitions and other useful information to co-ordinate international practice; the word is of Latin origin: during the Roman Republic, the census was a list that kept track of all adult males fit for military service. The modern census is essential to international comparisons of any kind of statistics, censuses collect data on many attributes of a population, not just how many people there are. Censuses began as the only method of collecting national demographic data, are now part of a larger system of different surveys.
Although population estimates remain an important function of a census, including the geographic distribution of the population, statistics can be produced about combinations of attributes e.g. education by age and sex in different regions. Current administrative data systems allow for other approaches to enumeration with the same level of detail but raise concerns about privacy and the possibility of biasing estimates. A census can be contrasted with sampling in which information is obtained only from a subset of a population. Modern census data are used for research, business marketing, planning, as a baseline for designing sample surveys by providing a sampling frame such as an address register. Census counts are necessary to adjust samples to be representative of a population by weighting them as is common in opinion polling. Stratification requires knowledge of the relative sizes of different population strata which can be derived from census enumerations. In some countries, the census provides the official counts used to apportion the number of elected representatives to regions.
In many cases, a chosen random sample can provide more accurate information than attempts to get a population census. A census is construed as the opposite of a sample as its intent is to count everyone in a population rather than a fraction. However, population censuses rely on a sampling frame to count the population; this is the only way to be sure that everyone has been included as otherwise those not responding would not be followed up on and individuals could be missed. The fundamental premise of a census is that the population is not known and a new estimate is to be made by the analysis of primary data; the use of a sampling frame is counterintuitive as it suggests that the population size is known. However, a census is used to collect attribute data on the individuals in the nation; this process of sampling marks the difference between historical census, a house to house process or the product of an imperial decree, the modern statistical project. The sampling frame used by census is always an address register.
Thus it is not known how many people there are in each household. Depending on the mode of enumeration, a form is sent to the householder, an enumerator calls, or administrative records for the dwelling are accessed; as a preliminary to the dispatch of forms, census workers will check any address problems on the ground. While it may seem straightforward to use the postal service file for this purpose, this can be out of date and some dwellings may contain a number of independent households. A particular problem is what are termed'communal establishments' which category includes student residences, religious orders, homes for the elderly, people in prisons etc; as these are not enumerated by a single householder, they are treated differently and visited by special teams of census workers to ensure they are classified appropriately. Individuals are counted within households and information is collected about the household structure and the housing. For this reason international documents refer to censuses of housing.
The census response is made by a household, indicating details of individuals resident there. An important aspect of census enumerations is determining which individuals can be counted from which cannot be counted. Broadly, three definitions can be used: de facto residence; this is important to consider individuals who have temporary addresses. Every person should be identified uniquely as resident in one place but where they happen to be on Census Day, their de facto residence, may not be the best place to count them. Where an individual uses services may be more useful and this is at their usual, or de jure, residence. An individual may be represented at a permanent address a family home for students or long term migrants, it is necessary to have a precise definition of residence to decide whether visitors to a country should be included in the population count. This is becoming more important as students travel abroad for education for a period of several years. Other groups causing problems of enumeration are new born babies, people away on holiday, people moving home around census day, people without a fixed address.
People having second homes because of working in another part of the country or retaining a holiday cottage are dif
Inyo County, California
Inyo County is a county in the U. S. state of California. As of the 2010 census, the population was 18,546; the county seat is Independence. Inyo County is on the east side of the Sierra Nevada and southeast of Yosemite National Park in Central California, it contains the Owens River Valley. With an area of 10,192 square miles, Inyo County is the second-largest county by area in California, after San Bernardino County. One-half of that area is within Death Valley National Park. However, with a population density of 1.8 people per square mile, it has the second-lowest population density in California, after Alpine County. Mount Whitney, the highest peak in the contiguous United States, is on Inyo County's western border; the Badwater Basin in Death Valley National Park, the lowest place in North America, is in eastern Inyo County. The difference between the two points is about 14,700 feet, they are not visible from each other, but both can be observed from the Panamint Range on the west side of Death Valley, above the Panamint Valley.
Thus, Inyo County has the greatest elevation difference among all of the counties and county-equivalents in the contiguous United States. Present day Inyo county has been the historic homeland for thousands of years of the Mono tribe, Coso people and Kawaiisu Native Americans, they spoke the Mono language with Mono traditional narratives. The descendants of these ancestors continue to live in their traditional homelands in the Owens River Valley and in Death Valley National Park. Inyo County was formed in 1866 out of the territory of the unorganized Coso County, created on April 4, 1864 from parts of Mono and Tulare Counties, it acquired more territory from Mono County in 1870 and Kern County and San Bernardino County in 1872. For many years it has been believed that the county derived its name from the Mono tribe of Native Americans name for the mountains in its former homeland; the name came to be thought of, mistakenly, as the name of the mountains to the east of the Owens Valley when the first whites there asked the local Paiutes what the name of the mountains to the east was.
The local Paiutes responded that, the land of Inyo. They meant by this that those lands belonged to the Shoshone tribe headed by a man whose name was Inyo. Inyo was the name of the headman of the Panamint band of Paiute-Shoshone people at the time of contact when the first whites, the Manly expedition of 1849, lost, into Death Valley on their expedition to the gold fields of western California; the Owens Valley whites misunderstood the local Paiute and thought that Inyo was the name of the mountains when it was the name of the chief, or headman, of the tribe that had those mountains as part of their homeland. "Indian George", a fixture of many of the stories of early Death Valley days, was Inyo's son. Indian George's Shoshone name was "Bah-Vanda-Sa-Va-Nu-Kee", which means "The Boy Who Ran Away", a name he was given when he became terrified of the whites and their wheeled wagons and huge buffalo, none of which the Shoshone had seen before when they came wandering down Furnace Creek Wash in December 1849.
In 1940, when Bah-vanda was around 100 years old, JC Boyles, a Panamint Shoshone who had become educated, came back to the Panamint Valley and interviewed Bah-Vanda at length about the early days of his life, including the events of 1849, it is in this interview that Bah-vanda refers to his father, Inyo. In order to provide water needs for the growing City of Los Angeles, water was diverted from the Owens River into the Los Angeles Aqueduct in 1913; the Owens River Valley cultures and environments changed substantially. From the 1910s to 1930s the Los Angeles Department of Water and Power purchased much of the valley for water rights and control. In 1941 the Los Angeles Department of Water and Power extended the Los Angeles Aqueduct system further upriver into the Mono Basin. Inyo County is host to a number of natural superlatives. Among them are: Mount Whitney, with an elevation of 14,505 feet, is the highest point in the contiguous United States, the 12th highest peak in the U. S. and the 24th highest peak in North America.
Badwater Basin, in Death Valley, the lowest point in North America Methuselah, an ancient Bristlecone pine tree and one of the oldest living trees on Earth Owens Valley, the deepest valley on the American continents Two mountain ranges exceeding 14,000 feet in elevation: The Sierra Nevada and the White Mountains Thirteen of California's fifteen peaks which exceed 14,000 feet in elevation. S. Census Bureau, the county has a total area of 10,227 square miles, of which 10,181 square miles is land and 46 square miles is water, it is the second-largest county by the ninth-largest in the United States. Death Valley National Park Inyo National Forest Manzanar National Historic SiteThere are 22 official wilderness areas in Inyo County that are part of the National Wilderness Preservation System; this is the second-largest number of any county, exceeded only by San Bernardino County's 35 wilderness areas. Most of these are managed by the Bureau of Land
Death Valley National Park
Death Valley National Park is an American national park that straddles the California—Nevada border, east of the Sierra Nevada. The park boundaries include Death Valley, the northern section of Panamint Valley, the southern section of Eureka Valley, most of Saline Valley; the park occupies an interface zone between the arid Great Basin and Mojave deserts, protecting the northwest corner of the Mojave Desert and its diverse environment of salt-flats, sand dunes, valleys and mountains. Death Valley is the largest national park in the lower 48 states, the hottest and lowest of all the national parks in the United States; the second-lowest point in the Western Hemisphere is in Badwater Basin, 282 feet below sea level. 91% of the park is a designated wilderness area. The park is home to many species of plants and animals that have adapted to this harsh desert environment; some examples include creosote bush, bighorn sheep and the Death Valley pupfish, a survivor from much wetter times. UNESCO included Death Valley as the principal feature of its Mojave and Colorado Deserts Biosphere Reserve in 1984.
A series of Native American groups inhabited the area from as early as 7000 BC, most the Timbisha around 1000 AD who migrated between winter camps in the valleys and summer grounds in the mountains. A group of European-Americans, trapped in the valley in 1849 while looking for a shortcut to the gold fields of California, gave the valley its name though only one of their group died there. Several short-lived boom towns sprang up during the late 19th and early 20th centuries to mine gold and silver; the only long-term profitable ore to be mined was borax, transported out of the valley with twenty-mule teams. The valley became the subject of books, radio programs, television series, movies. Tourism expanded in the 1920s when resorts were built around Furnace Creek. Death Valley National Monument was declared in 1933 and the park was expanded and became a national park in 1994; the natural environment of the area has been shaped by its geology. The valley is a graben with the oldest rocks being extensively metamorphosed and at least 1.7 billion years old.
Ancient, shallow seas deposited marine sediments until rifting opened the Pacific Ocean. Additional sedimentation occurred; the subduction created a line of volcanoes. The crust started to pull apart, creating the current Basin and Range landform. Valleys filled with sediment and, during the wet times of glacial periods, with lakes, such as Lake Manly. In 2013, Death Valley National Park was designated as a dark sky park by the International Dark-Sky Association. There are two major valleys in Death Valley and Panamint Valley. Both of these valleys were formed within the last few million years and both are bounded by north–south-trending mountain ranges; these and adjacent valleys follow the general trend of Basin and Range topography with one modification: there are parallel strike-slip faults that perpendicularly bound the central extent of Death Valley. The result of this shearing action is additional extension in the central part of Death Valley which causes a slight widening and more subsidence there.
Uplift of surrounding mountain ranges and subsidence of the valley floor are both occurring. The uplift on the Black Mountains is so fast that the alluvial fans there are small and steep compared to the huge alluvial fans coming off the Panamint Range. Fast uplift of a mountain range in an arid environment does not allow its canyons enough time to cut a classic V-shape all the way down to the stream bed. Instead, a V-shape ends at a slot canyon halfway down, forming a'wine glass canyon.' Sediment is deposited on a steep alluvial fan. At 282 feet below sea level at its lowest point, Badwater Basin on Death Valley's floor is the second-lowest depression in the Western Hemisphere, while Mount Whitney, only 85 miles to the west, rises to 14,505 feet; this topographic relief is the greatest elevation gradient in the contiguous United States and is the terminus point of the Great Basin's southwestern drainage. Although the extreme lack of water in the Great Basin makes this distinction of little current practical use, it does mean that in wetter times the lake that once filled Death Valley was the last stop for water flowing in the region, meaning the water there was saturated in dissolved materials.
Thus the salt pans in Death Valley are among the largest in the world and are rich in minerals, such as borax and various salts and hydrates. The largest salt pan in the park extends 40 miles from the Ashford Mill Site to the Salt Creek Hills, covering some 200 square miles of the valley floor; the best known playa in the park is the Racetrack, known for its moving rocks. Death Valley is the hottest and driest place in North America due to its lack of surface water and low relief, it is so the hottest spot in the United States that many tabulations of the highest daily temperatures in the country omit Death Valley as a matter of course. On the afternoon of July 10, 1913, the United States Weather Bureau recorded a high temperature of 134 °F at Greenland Ranch in Death Valley; this temperature stands as the highest ambient air temperature recorded at the surface of the Earth. Daily summer temperatures of 120 °F or greater are common, as well as below freezing nightly temperatur
Population density is a measurement of population per unit area or unit volume. It is applied to living organisms, most of the time to humans, it is a key geographical term. In simple terms population density refers to the number of people living in an area per kilometer square. Population density is population divided by total land water volume, as appropriate. Low densities may lead to further reduced fertility; this is called the Allee effect after the scientist. Examples of the causes in low population densities include: Increased problems with locating sexual mates Increased inbreeding For humans, population density is the number of people per unit of area quoted per square kilometer or square mile; this may be calculated for a county, country, another territory or the entire world. The world's population is around 7,500,000,000 and Earth's total area is 510,000,000 square kilometers. Therefore, the worldwide human population density is around 7,500,000,000 ÷ 510,000,000 = 14.7 per km2. If only the Earth's land area of 150,000,000 km2 is taken into account human population density is 50 per km2.
This includes all continental and island land area, including Antarctica. If Antarctica is excluded population density rises to over 55 people per km2. However, over half of the Earth's land mass consists of areas inhospitable to human habitation, such as deserts and high mountains, population tends to cluster around seaports and fresh-water sources. Thus, this number by itself does not give any helpful measurement of human population density. Several of the most densely populated territories in the world are city-states and dependencies; these territories have a small area and a high urbanization level, with an economically specialized city population drawing on rural resources outside the area, illustrating the difference between high population density and overpopulation The potential to maintain the agricultural aspects of deserts is limited as there is not enough precipitation to support a sustainable land. The population in these areas are low. Therefore, cities in the Middle East, such as Dubai, have been increasing in population and infrastructure growth at a fast pace.
Cities with high population densities are, by some, considered to be overpopulated, though this will depend on factors like quality of housing and infrastructure and access to resources. Most of the most densely populated cities are in Southeast Asia, though Cairo and Lagos in Africa fall into this category. City population and area are, however dependent on the definition of "urban area" used: densities are invariably higher for the central city area than when suburban settlements and the intervening rural areas are included, as in the areas of agglomeration or metropolitan area, the latter sometimes including neighboring cities. For instance, Milwaukee has a greater population density when just the inner city is measured, the surrounding suburbs excluded. In comparison, based on a world population of seven billion, the world's inhabitants, as a loose crowd taking up ten square feet per person, would occupy a space a little larger than Delaware's land area; the Gaza Strip has a population density of 5,046 pop/km.
Although arithmetic density is the most common way of measuring population density, several other methods have been developed to provide a more accurate measure of population density over a specific area. Arithmetic density: The total number of people / area of land Physiological density: The total population / area of arable land Agricultural density: The total rural population / area of arable land Residential density: The number of people living in an urban area / area of residential land Urban density: The number of people inhabiting an urban area / total area of urban land Ecological optimum: The density of population that can be supported by the natural resources Demography Human geography Idealized population Optimum population Population genetics Population health Population momentum Population pyramid Rural transport problem Small population size Distance sampling List of population concern organizations List of countries by population density List of cities by population density List of city districts by population density List of English districts by population density List of European cities proper by population density List of United States cities by population density List of islands by population density List of U.
S. states by population density List of Australian suburbs by population density Selected Current and Historic City, Ward & Neighborhood Density Duncan Smith / UCL Centre for Advanced Spatial Analysis. "World Population Density". Exploratory map shows data from the Global Human Settlement Layer produced by the European Commission JRC and the CIESIN Columbia University
Race and ethnicity in the United States Census
Race and ethnicity in the United States Census, defined by the federal Office of Management and Budget and the United States Census Bureau, are self-identification data items in which residents choose the race or races with which they most identify, indicate whether or not they are of Hispanic or Latino origin. The racial categories represent a social-political construct for the race or races that respondents consider themselves to be and, "generally reflect a social definition of race recognized in this country." OMB defines the concept of race as outlined for the US Census as not "scientific or anthropological" and takes into account "social and cultural characteristics as well as ancestry", using "appropriate scientific methodologies" that are not "primarily biological or genetic in reference." The race categories include both national-origin groups. Race and ethnicity are considered separate and distinct identities, with Hispanic or Latino origin asked as a separate question. Thus, in addition to their race or races, all respondents are categorized by membership in one of two ethnic categories, which are "Hispanic or Latino" and "Not Hispanic or Latino".
However, the practice of separating "race" and "ethnicity" as different categories has been criticized both by the American Anthropological Association and members of US Commission on Civil Rights. In 1997, OMB issued a Federal Register notice regarding revisions to the standards for the classification of federal data on race and ethnicity. OMB developed race and ethnic standards in order to provide "consistent data on race and ethnicity throughout the Federal Government; the development of the data standards stem in large measure from new responsibilities to enforce civil rights laws." Among the changes, OMB issued the instruction to "mark one or more races" after noting evidence of increasing numbers of interracial children and wanting to capture the diversity in a measurable way and having received requests by people who wanted to be able to acknowledge their or their children's full ancestry rather than identifying with only one group. Prior to this decision, the Census and other government data collections asked people to report only one race.
The OMB states, "many federal programs are put into effect based on the race data obtained from the decennial census. Race data are critical for the basic research behind many policy decisions. States require these data to meet legislative redistricting requirements; the data are needed to monitor compliance with the Voting Rights Act by local jurisdictions". "Data on ethnic groups are important for putting into effect a number of federal statutes. Data on Ethnic Groups are needed by local governments to run programs and meet legislative requirements." The 1790 United States Census was the first census in the history of the United States. The population of the United States was recorded as 3,929,214 as of Census Day, August 2, 1790, as mandated by Article I, Section 2 of the United States Constitution and applicable laws."The law required that every household be visited, that completed census schedules be posted in'two of the most public places within, there to remain for the inspection of all concerned...' and that'the aggregate amount of each description of persons' for every district be transmitted to the president."
This law along with U. S. marshals were responsible for governing the census. One third of the original census data has been lost or destroyed since documentation; the data was lost in 1790–1830 time period and included data from: Connecticut, Maryland, New Hampshire, New York, North Carolina, Rhode Island, South Carolina, Delaware, New Jersey, Virginia. Census data included the name of the head of the family and categorized inhabitants as follows: free white males at least 16 years of age, free white males under 16 years of age, free white females, all other free persons, slaves. Thomas Jefferson the Secretary of State, directed marshals to collect data from all thirteen states, from the Southwest Territory; the census was not conducted in Vermont until 1791, after that state's admission to the Union as the 14th state on March 4 of that year. There was some doubt surrounding the numbers, President George Washington and Thomas Jefferson maintained the population was undercounted; the potential reasons Washington and Jefferson may have thought this could be refusal to participate, poor public transportation and roads, spread out population, restraints of current technology.
No microdata from the 1790 population census is available, but aggregate data for small areas and their compatible cartographic boundary files, can be downloaded from the National Historical Geographic Information System. In 1800 and 1810, the age question regarding free white males was more detailed; the 1820
North American Numbering Plan
The North American Numbering Plan is a telephone numbering plan that encompasses twenty-five distinct regions in twenty countries in North America, including the Caribbean. Some North American countries, most notably Mexico, do not participate in the NANP; the NANP was devised in the 1940s by AT&T for the Bell System and independent telephone operators in North America to unify the diverse local numbering plans, established in the preceding decades. AT&T continued to administer the numbering plan until the breakup of the Bell System, when administration was delegated to the North American Numbering Plan Administration, a service, procured from the private sector by the Federal Communications Commission in the United States; each participating country forms a regulatory authority that has plenary control over local numbering resources. The FCC serves as the U. S. regulator. Canadian numbering decisions are made by the Canadian Numbering Administration Consortium; the NANP divides the territories of its members into numbering plan areas which are encoded numerically with a three-digit telephone number prefix called the area code.
Each telephone is assigned a seven-digit telephone number unique only within its respective plan area. The telephone number consists of a four-digit station number; the combination of an area code and the telephone number serves as a destination routing address in the public switched telephone network. For international call routing, the NANP has been assigned the international calling code 1 by the International Telecommunications Union; the North American Numbering Plan conforms with ITU Recommendation E.164, which establishes an international numbering framework. From its beginnings in 1876 and throughout the first part of the 20th century, the Bell System grew from local or regional telephone systems; these systems expanded by growing their subscriber bases, as well as increasing their service areas by implementing additional local exchanges that were interconnected with tie trunks. It was the responsibility of each local administration to design telephone numbering plans that accommodated the local requirements and growth.
As a result, the Bell System as a whole developed into an unorganized system of many differing local numbering systems. The diversity impeded the efficient operation and interconnection of exchanges into a nationwide system for long-distance telephone communication. By the 1940s, the Bell System set out to unify the various numbering plans in existence and developed the North American Numbering Plan as a unified, systematic approach to efficient long-distance service that did not require the involvement of switchboard operators; the new numbering plan was accepted in October 1947, dividing most of North America into eighty-six numbering plan areas. Each NPA was assigned a numbering plan area code abbreviated as area code; these codes were first used by long-distance operators to establish long-distance calls between toll offices. The first customer-dialed direct call using area codes was made on November 10, 1951, from Englewood, New Jersey, to Alameda, California. Direct distance dialing was subsequently introduced across the country.
By the early 1960s, most areas of the Bell System had been converted and DDD had become commonplace in cities and most larger towns. In the following decades, the system expanded to include all of the United States and its territories, Canada and seventeen nations of the Caribbean. By 1967, 129 area codes had been assigned. At the request of the British Colonial Office, the numbering plan was first expanded to Bermuda and the British West Indies because of their historic telecommunications administration through Canada as parts of the British Empire and their continued associations with Canada during the years of the telegraph and the All Red Line system. Not all North American countries participate in the NANP. Exceptions include Mexico, Saint Pierre and Miquelon, the Central American countries and some Caribbean countries; the only Spanish-speaking state in the system is the Dominican Republic. Mexican participation was planned, but implementation stopped after three area codes had been assigned, Mexico opted for an international numbering format, using country code 52.
The area codes in use were subsequently withdrawn in 1991. Area code 905 for Mexico City, was reassigned to a split of area code 416 in the Greater Toronto Area. Dutch-speaking Sint Maarten joined the NANP in September 2011, receiving area code 721; the NANP is administered by the North American Numbering Plan Administration. Today, this function is overseen by the Federal Communications Commission, which assumed the responsibility upon the breakup of the Bell System; the FCC solicits private sector contracts for the role of the administrator. The service was provided by a division of Lockheed Martin. In 1997, the contract was awarded to Neustar Inc.. In 2012, the contract was renewed until 2017. In 2015, the contract beginning 2017 was granted to Ericsson; the vision and goal of the architects of the North American Numbering Plan was a system by which telephone subscribers in the United States and Canada could themselves dial and establish a telephone call to any other subscriber wi