Solid Concepts 1911 DMLS

From Wikipedia, the free encyclopedia
Jump to: navigation, search
Solid Concepts 1911 DMLS
The Solid Concepts 3D printed 1911 pistol.jpg
The Solid Concepts 3D printed 1911 pistol
Type Semi-automatic pistol
Place of origin United States
Production history
Designer John Browning
Designed 1911 (original design) / 2013 (3D printed version)
Manufacturer Solid Concepts
Produced 2013
Specifications
Cartridge .45 ACP
Action Short recoil operation
Feed system 7-round standard detachable box magazine

The Solid Concepts 1911 DMLS is a 3D-printed version of the M1911 pistol,[1][2] it was made public around November 2013[1][2] and was printed via the direct metal laser sintering (DMLS) method.[1][2] It was created by Solid Concepts.[1][2][3] A Solid Concepts Browning M1911 replica fired more than 600 rounds without any apparent damage to the gun,[2] the metal printer used to create the weapon cost between $500,000 to $1,000,000 at the time the gun was created as of November 2013.[2] The first gun, version 1.0, is made up of 34 3D-printed 17-4 stainless steel components.[4]

Specifications[edit]

Looking from the “Chamber end” of the Solid Concepts 3D printed barrel
The ability to place text inside the barrel is possible with 3D printing

It weighs 2.25 pounds (1.02 kg) when it is empty i.e is not filled with a magazine and the trigger pull weighs 5 pounds-force (22 N). The width is 1.3 inches (33 mm) wide. The sight radius is 6.4 inches (160 mm) and consists of a standard GI with a square notch rear. The ratio of the twist is 1:15.8; at 6=Lands 6=Grooves.[5] The gun used Inconel 625 (a nickel-chromium alloy) material and stainless steel via the Direct Metal Laser Sintering method.[5]

The Solid Concepts Browning M1911 replica, version 2.0, will be composed of 34 Inconel 625 components, (not including grips). The two carbon-fiber filled nylon 12 grips were also 3D printed. Unlike early 3D printed plastic guns, the barrel of the 1911 was rifled. None of the parts machined during production and assembly took less than seven minutes once the parts have been de-supported and cleaned.[6]

Printer[edit]

The German EOSINT M270 Direct Metal 3D Printer used[7] to create the weapon cost between $500,000 to $1,000,000 at the time the gun was created as of November 2013 and uses a commercial-grade power source,[2] the printer requires argon and nitrogen gas[7]

Capability and firing tests[edit]

According to Sky News, during the initial test Solid Concepts stated: "It functions beautifully. Our resident gun expert has fired 50 successful rounds and hit a few bull's eyes at over 30 yards (27.43 metres)".[8] In subsequent tests it fired more than 600 rounds without any damage to the gun,[2] the chamber can handle the pressure of more than 20,000 pounds per square inch (140,000 kPa) generated when the gun is fired.[2] The Solid Concepts Pistol fired its 5000th round on 6 September 2014.

See also[edit]

References[edit]