1.
American and British English spelling differences
–
Many of the differences between American and British English date back to a time when spelling standards had not yet developed. For instance, some spellings seen as American today were once used in Britain. But English-language spelling reform has rarely been adopted otherwise, and thus modern English orthography varies somewhat between countries and is far from phonemic in any country, in the early 18th century, English spelling was inconsistent. These differences became noticeable after the publishing of influential dictionaries, todays British English spellings mostly follow Johnsons A Dictionary of the English Language, while many American English spellings follow Websters An American Dictionary of the English Language. Webster was a proponent of English spelling reform for reasons both philological and nationalistic, in A Companion to the American Revolution, John Algeo notes, it is often assumed that characteristically American spellings were invented by Noah Webster. He was very influential in popularizing certain spellings in America, rather he chose already existing options such as center, color and check for the simplicity, analogy or etymology. William Shakespeares first folios, for example, used spellings like center and color as much as centre, Webster did attempt to introduce some reformed spellings, as did the Simplified Spelling Board in the early 20th century, but most were not adopted. In Britain, the influence of those who preferred the Norman spellings of words proved to be decisive, later spelling adjustments in the United Kingdom had little effect on todays American spellings and vice versa. For the most part, the systems of most Commonwealth countries. Australian spelling has also strayed slightly from British spelling, with some American spellings incorporated as standard, New Zealand spelling is almost identical to British spelling, except in the word fiord. There is also an increasing use of macrons in words that originated in Māori, most words ending in an unstressed -our in British English end in -or in American English. Wherever the vowel is unreduced in pronunciation, e. g. contour, velour, paramour and troubadour the spelling is the same everywhere, most words of this kind came from Latin, where the ending was spelled -or. They were first adopted into English from early Old French, after the Norman conquest of England, the ending became -our to match the Old French spelling. The -our ending was not only used in new English borrowings, however, -or was still sometimes found, and the first three folios of Shakespeares plays used both spellings before they were standardised to -our in the Fourth Folio of 1685. After the Renaissance, new borrowings from Latin were taken up with their original -or ending, Websters 1828 dictionary had only -or and is given much of the credit for the adoption of this form in the United States. Johnson, unlike Webster, was not an advocate of spelling reform and he preferred French over Latin spellings because, as he put it, the French generally supplied us. In Jeffersons original draft it is spelled honour, Honor and honour were equally frequent in Britain until the 17th century, honor still is, in the UK, the usual spelling as a persons name and appears in Honor Oak, a district of London. In derivatives and inflected forms of the words, British usage depends on the nature of the suffix used

2.
International Bureau of Weights and Measures
–
The organisation is usually referred to by its French initialism, BIPM. The BIPM reports to the International Committee for Weights and Measures and these organizations are also commonly referred to by their French initialisms. The BIPM was created on 20 May 1875, following the signing of the Metre Convention, under the authority of the Metric Convention, the BIPM helps to ensure uniformity of SI weights and measures around the world. It does so through a series of committees, whose members are the national metrology laboratories of the Conventions member states. The BIPM carries out measurement-related research and it takes part in and organises international comparisons of national measurement standards and performs calibrations for member states. The BIPM has an important role in maintaining accurate worldwide time of day and it combines, analyses, and averages the official atomic time standards of member nations around the world to create a single, official Coordinated Universal Time. The BIPM is also the keeper of the prototype of the kilogram. Metrologia Institute for Reference Materials and Measurements International Organization for Standardization National Institute of Standards and Technology Official website

3.
SI derived unit
–
The International System of Units specifies a set of seven base units from which all other SI units of measurement are derived. Each of these units is either dimensionless or can be expressed as a product of powers of one or more of the base units. For example, the SI derived unit of area is the metre. The degree Celsius has an unclear status, and is arguably an exception to this rule. The names of SI units are written in lowercase, the symbols for units named after persons, however, are always written with an uppercase initial letter. In addition to the two dimensionless derived units radian and steradian,20 other derived units have special names, some other units such as the hour, litre, tonne, bar and electronvolt are not SI units, but are widely used in conjunction with SI units. Until 1995, the SI classified the radian and the steradian as supplementary units, but this designation was abandoned, International System of Quantities International System of Units International Vocabulary of Metrology Metric prefix Metric system Non-SI units mentioned in the SI Planck units SI base unit I. Mills, Tomislav Cvitas, Klaus Homann, Nikola Kallay, IUPAC, Quantities, Units and Symbols in Physical Chemistry. CS1 maint, Multiple names, authors list

4.
Area
–
Area is the quantity that expresses the extent of a two-dimensional figure or shape, or planar lamina, in the plane. Surface area is its analog on the surface of a three-dimensional object. It is the analog of the length of a curve or the volume of a solid. The area of a shape can be measured by comparing the shape to squares of a fixed size, in the International System of Units, the standard unit of area is the square metre, which is the area of a square whose sides are one metre long. A shape with an area of three square metres would have the area as three such squares. In mathematics, the square is defined to have area one. There are several formulas for the areas of simple shapes such as triangles, rectangles. Using these formulas, the area of any polygon can be found by dividing the polygon into triangles, for shapes with curved boundary, calculus is usually required to compute the area. Indeed, the problem of determining the area of plane figures was a motivation for the historical development of calculus. For a solid such as a sphere, cone, or cylinder. Formulas for the areas of simple shapes were computed by the ancient Greeks. Area plays an important role in modern mathematics, in addition to its obvious importance in geometry and calculus, area is related to the definition of determinants in linear algebra, and is a basic property of surfaces in differential geometry. In analysis, the area of a subset of the plane is defined using Lebesgue measure, in general, area in higher mathematics is seen as a special case of volume for two-dimensional regions. Area can be defined through the use of axioms, defining it as a function of a collection of certain plane figures to the set of real numbers and it can be proved that such a function exists. An approach to defining what is meant by area is through axioms, area can be defined as a function from a collection M of special kind of plane figures to the set of real numbers which satisfies the following properties, For all S in M, a ≥0. If S and T are in M then so are S ∪ T and S ∩ T, if S and T are in M with S ⊆ T then T − S is in M and a = a − a. If a set S is in M and S is congruent to T then T is also in M, every rectangle R is in M. If the rectangle has length h and breadth k then a = hk, let Q be a set enclosed between two step regions S and T

5.
Unicode
–
Unicode is a computing industry standard for the consistent encoding, representation, and handling of text expressed in most of the worlds writing systems. As of June 2016, the most recent version is Unicode 9.0, the standard is maintained by the Unicode Consortium. Unicodes success at unifying character sets has led to its widespread, the standard has been implemented in many recent technologies, including modern operating systems, XML, Java, and the. NET Framework. Unicode can be implemented by different character encodings, the most commonly used encodings are UTF-8, UTF-16 and the now-obsolete UCS-2. UTF-8 uses one byte for any ASCII character, all of which have the same values in both UTF-8 and ASCII encoding, and up to four bytes for other characters. UCS-2 uses a 16-bit code unit for each character but cannot encode every character in the current Unicode standard, UTF-16 extends UCS-2, using one 16-bit unit for the characters that were representable in UCS-2 and two 16-bit units to handle each of the additional characters. Many traditional character encodings share a common problem in that they allow bilingual computer processing, Unicode, in intent, encodes the underlying characters—graphemes and grapheme-like units—rather than the variant glyphs for such characters. In the case of Chinese characters, this leads to controversies over distinguishing the underlying character from its variant glyphs. In text processing, Unicode takes the role of providing a unique code point—a number, in other words, Unicode represents a character in an abstract way and leaves the visual rendering to other software, such as a web browser or word processor. This simple aim becomes complicated, however, because of concessions made by Unicodes designers in the hope of encouraging a more rapid adoption of Unicode, the first 256 code points were made identical to the content of ISO-8859-1 so as to make it trivial to convert existing western text. For other examples, see duplicate characters in Unicode and he explained that he name Unicode is intended to suggest a unique, unified, universal encoding. In this document, entitled Unicode 88, Becker outlined a 16-bit character model, Unicode could be roughly described as wide-body ASCII that has been stretched to 16 bits to encompass the characters of all the worlds living languages. In a properly engineered design,16 bits per character are more than sufficient for this purpose, Unicode aims in the first instance at the characters published in modern text, whose number is undoubtedly far below 214 =16,384. By the end of 1990, most of the work on mapping existing character encoding standards had been completed, the Unicode Consortium was incorporated in California on January 3,1991, and in October 1991, the first volume of the Unicode standard was published. The second volume, covering Han ideographs, was published in June 1992, in 1996, a surrogate character mechanism was implemented in Unicode 2.0, so that Unicode was no longer restricted to 16 bits. The Microsoft TrueType specification version 1.0 from 1992 used the name Apple Unicode instead of Unicode for the Platform ID in the naming table, Unicode defines a codespace of 1,114,112 code points in the range 0hex to 10FFFFhex. Normally a Unicode code point is referred to by writing U+ followed by its hexadecimal number, for code points in the Basic Multilingual Plane, four digits are used, for code points outside the BMP, five or six digits are used, as required. Code points in Planes 1 through 16 are accessed as surrogate pairs in UTF-16, within each plane, characters are allocated within named blocks of related characters

6.
Square (geometry)
–
In geometry, a square is a regular quadrilateral, which means that it has four equal sides and four equal angles. It can also be defined as a rectangle in which two adjacent sides have equal length, a square with vertices ABCD would be denoted ◻ ABCD. e. A rhombus with equal diagonals a convex quadrilateral with sides a, b, c, d whose area is A =12 =12. Opposite sides of a square are both parallel and equal in length, all four angles of a square are equal. All four sides of a square are equal, the diagonals of a square are equal. The square is the n=2 case of the families of n-hypercubes and n-orthoplexes, a truncated square, t, is an octagon. An alternated square, h, is a digon, the perimeter of a square whose four sides have length ℓ is P =4 ℓ and the area A is A = ℓ2. In classical times, the power was described in terms of the area of a square. This led to the use of the square to mean raising to the second power. The area can also be calculated using the diagonal d according to A = d 22. In terms of the circumradius R, the area of a square is A =2 R2, since the area of the circle is π R2, in terms of the inradius r, the area of the square is A =4 r 2. Because it is a polygon, a square is the quadrilateral of least perimeter enclosing a given area. Dually, a square is the quadrilateral containing the largest area within a given perimeter. Indeed, if A and P are the area and perimeter enclosed by a quadrilateral, then the isoperimetric inequality holds,16 A ≤ P2 with equality if. The diagonals of a square are 2 times the length of a side of the square and this value, known as the square root of 2 or Pythagoras constant, was the first number proven to be irrational. A square can also be defined as a parallelogram with equal diagonals that bisect the angles, if a figure is both a rectangle and a rhombus, then it is a square. If a circle is circumscribed around a square, the area of the circle is π /2 times the area of the square, if a circle is inscribed in the square, the area of the circle is π /4 times the area of the square. A square has an area than any other quadrilateral with the same perimeter

7.
Metre
–
The metre or meter, is the base unit of length in the International System of Units. The metre is defined as the length of the path travelled by light in a vacuum in 1/299792458 seconds, the metre was originally defined in 1793 as one ten-millionth of the distance from the equator to the North Pole. In 1799, it was redefined in terms of a metre bar. In 1960, the metre was redefined in terms of a number of wavelengths of a certain emission line of krypton-86. In 1983, the current definition was adopted, the imperial inch is defined as 0.0254 metres. One metre is about 3 3⁄8 inches longer than a yard, Metre is the standard spelling of the metric unit for length in nearly all English-speaking nations except the United States and the Philippines, which use meter. Measuring devices are spelled -meter in all variants of English, the suffix -meter has the same Greek origin as the unit of length. This range of uses is found in Latin, French, English. Thus calls for measurement and moderation. In 1668 the English cleric and philosopher John Wilkins proposed in an essay a decimal-based unit of length, as a result of the French Revolution, the French Academy of Sciences charged a commission with determining a single scale for all measures. In 1668, Wilkins proposed using Christopher Wrens suggestion of defining the metre using a pendulum with a length which produced a half-period of one second, christiaan Huygens had observed that length to be 38 Rijnland inches or 39.26 English inches. This is the equivalent of what is now known to be 997 mm, no official action was taken regarding this suggestion. In the 18th century, there were two approaches to the definition of the unit of length. One favoured Wilkins approach, to define the metre in terms of the length of a pendulum which produced a half-period of one second. The other approach was to define the metre as one ten-millionth of the length of a quadrant along the Earths meridian, that is, the distance from the Equator to the North Pole. This means that the quadrant would have defined as exactly 10000000 metres at that time. To establish a universally accepted foundation for the definition of the metre, more measurements of this meridian were needed. This portion of the meridian, assumed to be the length as the Paris meridian, was to serve as the basis for the length of the half meridian connecting the North Pole with the Equator

8.
SI base unit
–
The International System of Units defines seven units of measure as a basic set from which all other SI units can be derived. The SI base units form a set of mutually independent dimensions as required by dimensional analysis commonly employed in science, thus, the kelvin, named after Lord Kelvin, has the symbol K and the ampere, named after André-Marie Ampère, has the symbol A. Many other units, such as the litre, are not part of the SI. The definitions of the units have been modified several times since the Metre Convention in 1875. Since the redefinition of the metre in 1960, the kilogram is the unit that is directly defined in terms of a physical artifact. However, the mole, the ampere, and the candela are linked through their definitions to the mass of the platinum–iridium cylinder stored in a vault near Paris. It has long been an objective in metrology to define the kilogram in terms of a fundamental constant, two possibilities have attracted particular attention, the Planck constant and the Avogadro constant. The 23rd CGPM decided to postpone any formal change until the next General Conference in 2011

9.
Length
–
In geometric measurements, length is the most extended dimension of an object. In the International System of Quantities, length is any quantity with dimension distance, in other contexts length is the measured dimension of an object. For example, it is possible to cut a length of a wire which is shorter than wire thickness. Length may be distinguished from height, which is vertical extent, and width or breadth, length is a measure of one dimension, whereas area is a measure of two dimensions and volume is a measure of three dimensions. In most systems of measurement, the unit of length is a base unit, measurement has been important ever since humans settled from nomadic lifestyles and started using building materials, occupying land and trading with neighbours. As society has become more technologically oriented, much higher accuracies of measurement are required in a diverse set of fields. One of the oldest units of measurement used in the ancient world was the cubit which was the length of the arm from the tip of the finger to the elbow. This could then be subdivided into shorter units like the foot, hand or finger, the cubit could vary considerably due to the different sizes of people. After Albert Einsteins special relativity, length can no longer be thought of being constant in all reference frames. Thus a ruler that is one meter long in one frame of reference will not be one meter long in a frame that is travelling at a velocity relative to the first frame. This means length of an object is variable depending on the observer, in the physical sciences and engineering, when one speaks of units of length, the word length is synonymous with distance. There are several units that are used to measure length, in the International System of Units, the basic unit of length is the metre and is now defined in terms of the speed of light. The centimetre and the kilometre, derived from the metre, are commonly used units. In U. S. customary units, English or Imperial system of units, commonly used units of length are the inch, the foot, the yard, and the mile. Units used to denote distances in the vastness of space, as in astronomy, are longer than those typically used on Earth and include the astronomical unit, the light-year. Dimension Distance Orders of magnitude Reciprocal length Smoot Unit of length

10.
Light
–
Light is electromagnetic radiation within a certain portion of the electromagnetic spectrum. The word usually refers to light, which is visible to the human eye and is responsible for the sense of sight. Visible light is defined as having wavelengths in the range of 400–700 nanometres, or 4.00 × 10−7 to 7.00 × 10−7 m. This wavelength means a range of roughly 430–750 terahertz. The main source of light on Earth is the Sun, sunlight provides the energy that green plants use to create sugars mostly in the form of starches, which release energy into the living things that digest them. This process of photosynthesis provides virtually all the used by living things. Historically, another important source of light for humans has been fire, with the development of electric lights and power systems, electric lighting has effectively replaced firelight. Some species of animals generate their own light, a process called bioluminescence, for example, fireflies use light to locate mates, and vampire squids use it to hide themselves from prey. Visible light, as all types of electromagnetic radiation, is experimentally found to always move at this speed in a vacuum. In physics, the term sometimes refers to electromagnetic radiation of any wavelength. In this sense, gamma rays, X-rays, microwaves and radio waves are also light, like all types of light, visible light is emitted and absorbed in tiny packets called photons and exhibits properties of both waves and particles. This property is referred to as the wave–particle duality, the study of light, known as optics, is an important research area in modern physics. Generally, EM radiation, or EMR, is classified by wavelength into radio, microwave, infrared, the behavior of EMR depends on its wavelength. Higher frequencies have shorter wavelengths, and lower frequencies have longer wavelengths, when EMR interacts with single atoms and molecules, its behavior depends on the amount of energy per quantum it carries. There exist animals that are sensitive to various types of infrared, infrared sensing in snakes depends on a kind of natural thermal imaging, in which tiny packets of cellular water are raised in temperature by the infrared radiation. EMR in this range causes molecular vibration and heating effects, which is how these animals detect it, above the range of visible light, ultraviolet light becomes invisible to humans, mostly because it is absorbed by the cornea below 360 nanometers and the internal lens below 400. Furthermore, the rods and cones located in the retina of the eye cannot detect the very short ultraviolet wavelengths and are in fact damaged by ultraviolet. Many animals with eyes that do not require lenses are able to detect ultraviolet, by quantum photon-absorption mechanisms, various sources define visible light as narrowly as 420 to 680 to as broadly as 380 to 800 nm

11.
Vacuum
–
Vacuum is space void of matter. The word stems from the Latin adjective vacuus for vacant or void, an approximation to such vacuum is a region with a gaseous pressure much less than atmospheric pressure. In engineering and applied physics on the hand, vacuum refers to any space in which the pressure is lower than atmospheric pressure. The Latin term in vacuo is used to describe an object that is surrounded by a vacuum, the quality of a partial vacuum refers to how closely it approaches a perfect vacuum. Other things equal, lower gas pressure means higher-quality vacuum, for example, a typical vacuum cleaner produces enough suction to reduce air pressure by around 20%. Ultra-high vacuum chambers, common in chemistry, physics, and engineering, operate below one trillionth of atmospheric pressure, outer space is an even higher-quality vacuum, with the equivalent of just a few hydrogen atoms per cubic meter on average. In the electromagnetism in the 19th century, vacuum was thought to be filled with a medium called aether, in modern particle physics, the vacuum state is considered the ground state of matter. Vacuum has been a frequent topic of debate since ancient Greek times. Evangelista Torricelli produced the first laboratory vacuum in 1643, and other techniques were developed as a result of his theories of atmospheric pressure. A torricellian vacuum is created by filling a glass container closed at one end with mercury. Vacuum became an industrial tool in the 20th century with the introduction of incandescent light bulbs and vacuum tubes. The recent development of human spaceflight has raised interest in the impact of vacuum on human health, the word vacuum comes from Latin an empty space, void, noun use of neuter of vacuus, meaning empty, related to vacare, meaning be empty. Vacuum is one of the few words in the English language that contains two consecutive letters u. Historically, there has been dispute over whether such a thing as a vacuum can exist. Ancient Greek philosophers debated the existence of a vacuum, or void, in the context of atomism, Aristotle believed that no void could occur naturally, because the denser surrounding material continuum would immediately fill any incipient rarity that might give rise to a void. Almost two thousand years after Plato, René Descartes also proposed a geometrically based alternative theory of atomism, without the problematic nothing–everything dichotomy of void, by the ancient definition however, directional information and magnitude were conceptually distinct. The explanation of a clepsydra or water clock was a topic in the Middle Ages. Although a simple wine skin sufficed to demonstrate a partial vacuum, in principle and he concluded that airs volume can expand to fill available space, and he suggested that the concept of perfect vacuum was incoherent. However, according to Nader El-Bizri, the physicist Ibn al-Haytham and the Mutazili theologians disagreed with Aristotle and Al-Farabi, using geometry, Ibn al-Haytham mathematically demonstrated that place is the imagined three-dimensional void between the inner surfaces of a containing body

12.
Time
–
Time is the indefinite continued progress of existence and events that occur in apparently irreversible succession from the past through the present to the future. Time is often referred to as the dimension, along with the three spatial dimensions. Time has long been an important subject of study in religion, philosophy, and science, nevertheless, diverse fields such as business, industry, sports, the sciences, and the performing arts all incorporate some notion of time into their respective measuring systems. Two contrasting viewpoints on time divide prominent philosophers, one view is that time is part of the fundamental structure of the universe—a dimension independent of events, in which events occur in sequence. Isaac Newton subscribed to this realist view, and hence it is referred to as Newtonian time. This second view, in the tradition of Gottfried Leibniz and Immanuel Kant, holds that time is neither an event nor a thing, Time in physics is unambiguously operationally defined as what a clock reads. Time is one of the seven fundamental physical quantities in both the International System of Units and International System of Quantities, Time is used to define other quantities—such as velocity—so defining time in terms of such quantities would result in circularity of definition. The operational definition leaves aside the question there is something called time, apart from the counting activity just mentioned, that flows. Investigations of a single continuum called spacetime bring questions about space into questions about time, questions that have their roots in the works of early students of natural philosophy. Furthermore, it may be there is a subjective component to time. Temporal measurement has occupied scientists and technologists, and was a motivation in navigation. Periodic events and periodic motion have long served as standards for units of time, examples include the apparent motion of the sun across the sky, the phases of the moon, the swing of a pendulum, and the beat of a heart. Currently, the unit of time, the second, is defined by measuring the electronic transition frequency of caesium atoms. Time is also of significant social importance, having economic value as well as value, due to an awareness of the limited time in each day. In day-to-day life, the clock is consulted for periods less than a day whereas the calendar is consulted for periods longer than a day, increasingly, personal electronic devices display both calendars and clocks simultaneously. The number that marks the occurrence of an event as to hour or date is obtained by counting from a fiducial epoch—a central reference point. Artifacts from the Paleolithic suggest that the moon was used to time as early as 6,000 years ago. Lunar calendars were among the first to appear, either 12 or 13 lunar months, without intercalation to add days or months to some years, seasons quickly drift in a calendar based solely on twelve lunar months

13.
Second
–
The second is the base unit of time in the International System of Units. It is qualitatively defined as the division of the hour by sixty. SI definition of second is the duration of 9192631770 periods of the corresponding to the transition between the two hyperfine levels of the ground state of the caesium 133 atom. Seconds may be measured using a mechanical, electrical or an atomic clock, SI prefixes are combined with the word second to denote subdivisions of the second, e. g. the millisecond, the microsecond, and the nanosecond. Though SI prefixes may also be used to form multiples of the such as kilosecond. The second is also the unit of time in other systems of measurement, the centimetre–gram–second, metre–kilogram–second, metre–tonne–second. Absolute zero implies no movement, and therefore zero external radiation effects, the second thus defined is consistent with the ephemeris second, which was based on astronomical measurements. The realization of the second is described briefly in a special publication from the National Institute of Standards and Technology. 1 international second is equal to, 1⁄60 minute 1⁄3,600 hour 1⁄86,400 day 1⁄31,557,600 Julian year 1⁄, more generally, = 1⁄, the Hellenistic astronomers Hipparchus and Ptolemy subdivided the day into sixty parts. They also used an hour, simple fractions of an hour. No sexagesimal unit of the day was used as an independent unit of time. The modern second is subdivided using decimals - although the third remains in some languages. The earliest clocks to display seconds appeared during the last half of the 16th century, the second became accurately measurable with the development of mechanical clocks keeping mean time, as opposed to the apparent time displayed by sundials. The earliest spring-driven timepiece with a hand which marked seconds is an unsigned clock depicting Orpheus in the Fremersdorf collection. During the 3rd quarter of the 16th century, Taqi al-Din built a clock with marks every 1/5 minute, in 1579, Jost Bürgi built a clock for William of Hesse that marked seconds. In 1581, Tycho Brahe redesigned clocks that displayed minutes at his observatory so they also displayed seconds, however, they were not yet accurate enough for seconds. In 1587, Tycho complained that his four clocks disagreed by plus or minus four seconds, in 1670, London clockmaker William Clement added this seconds pendulum to the original pendulum clock of Christiaan Huygens. From 1670 to 1680, Clement made many improvements to his clock and this clock used an anchor escapement mechanism with a seconds pendulum to display seconds in a small subdial

14.
SI prefix
–
A metric prefix is a unit prefix that precedes a basic unit of measure to indicate a multiple or fraction of the unit. While all metric prefixes in use today are decadic, historically there have been a number of binary metric prefixes as well. Each prefix has a symbol that is prepended to the unit symbol. The prefix kilo-, for example, may be added to gram to indicate multiplication by one thousand, the prefix milli-, likewise, may be added to metre to indicate division by one thousand, one millimetre is equal to one thousandth of a metre. Decimal multiplicative prefixes have been a feature of all forms of the system with six dating back to the systems introduction in the 1790s. Metric prefixes have even been prepended to non-metric units, the SI prefixes are standardized for use in the International System of Units by the International Bureau of Weights and Measures in resolutions dating from 1960 to 1991. Since 2009, they have formed part of the International System of Quantities, the BIPM specifies twenty prefixes for the International System of Units. Each prefix name has a symbol which is used in combination with the symbols for units of measure. For example, the symbol for kilo- is k, and is used to produce km, kg, and kW, which are the SI symbols for kilometre, kilogram, prefixes corresponding to an integer power of one thousand are generally preferred. Hence 100 m is preferred over 1 hm or 10 dam, the prefixes hecto, deca, deci, and centi are commonly used for everyday purposes, and the centimetre is especially common. However, some building codes require that the millimetre be used in preference to the centimetre, because use of centimetres leads to extensive usage of decimal points. Prefixes may not be used in combination and this also applies to mass, for which the SI base unit already contains a prefix. For example, milligram is used instead of microkilogram, in the arithmetic of measurements having units, the units are treated as multiplicative factors to values. If they have prefixes, all but one of the prefixes must be expanded to their numeric multiplier,1 km2 means one square kilometre, or the area of a square of 1000 m by 1000 m and not 1000 square metres. 2 Mm3 means two cubic megametres, or the volume of two cubes of 1000000 m by 1000000 m by 1000000 m or 2×1018 m3, and not 2000000 cubic metres, examples 5 cm = 5×10−2 m =5 ×0.01 m =0. The prefixes, including those introduced after 1960, are used with any metric unit, metric prefixes may also be used with non-metric units. The choice of prefixes with a unit is usually dictated by convenience of use. Unit prefixes for amounts that are larger or smaller than those actually encountered are seldom used

15.
Kilometre
–
The kilometre or kilometer is a unit of length in the metric system, equal to one thousand metres. K is occasionally used in some English-speaking countries as an alternative for the kilometre in colloquial writing. A slang term for the kilometre in the US military is klick, there are two common pronunciations for the word. It is generally preferred by the British Broadcasting Corporation and the Australian Broadcasting Corporation, many scientists and other users, particularly in countries where the metric system is not widely used, use the pronunciation with stress on the second syllable. The latter pronunciation follows the pattern used for the names of measuring instruments. The problem with this reasoning, however, is that the meter in those usages refers to a measuring device. The contrast is more obvious in countries using the British rather than American spelling of the word metre. When Australia introduced the system in 1975, the first pronunciation was declared official by the governments Metric Conversion Board. However, the Australian prime minister at the time, Gough Whitlam, by the 8 May 1790 decree, the Constituent assembly ordered the French Academy of Sciences to develop a new measurement system. In August 1793, the French National Convention decreed the metre as the length measurement system in the French Republic. The first name of the kilometre was Millaire, although the metre was formally defined in 1799, the myriametre was preferred to the kilometre for everyday use. The term myriamètre appeared a number of times in the text of Develeys book Physique dEmile, ou, Principes de la de la nature. French maps published in 1835 had scales showing myriametres and lieues de Poste, the Dutch, on the other hand, adopted the kilometre in 1817 but gave it the local name of the mijl. It was only in 1867 that the term became the only official unit of measure in the Netherlands to represent 1000 metres. In the US, the National Highway System Designation Act of 1995 prohibits the use of highway funds to convert existing signs or purchase new signs with metric units. Although the State DOTs had the option of using metric measurements or dual units, all of them abandoned metric measurements, the Manual on Uniform Traffic Control Devices since 2000 is published in both metric and American Customary Units. Some sporting disciplines feature 1000 m races in major events, but in other disciplines, even though records are catalogued

16.
Hectare
–
The hectare is an SI accepted metric system unit of area equal to 100 ares and primarily used in the measurement of land as a metric replacement for the imperial acre. An acre is about 0.405 hectare and one hectare contains about 2.47 acres, in 1795, when the metric system was introduced, the are was defined as 100 square metres and the hectare was thus 100 ares or 1⁄100 km2. When the metric system was further rationalised in 1960, resulting in the International System of Units, the are was not included as a recognised unit. The hectare, however, remains as a non-SI unit accepted for use with the SI units, the metric system of measurement was first given a legal basis in 1795 by the French Revolutionary government. At the first meeting of the CGPM in 1889 when a new standard metre, manufactured by Johnson Matthey & Co of London was adopted, in 1960, when the metric system was updated as the International System of Units, the are did not receive international recognition. The units that were catalogued replicated the recommendations of the CGPM, many farmers, especially older ones, still use the acre for everyday calculations, and convert to hectares only for official paperwork. Farm fields can have long histories which are resistant to change, with names such as the six acre field stretching back hundreds of years. The names centiare, deciare, decare and hectare are derived by adding the standard metric prefixes to the base unit of area. The centiare is a synonym for one square metre, the deciare is ten square metres. The are is a unit of area, equal to 100 square metres and it was defined by older forms of the metric system, but is now outside of the modern International System of Units. It is commonly used to measure real estate, in particular in Indonesia, India, and in French-, Portuguese-, Slovakian-, Serbian-, Czech-, Polish-, Dutch-, in Russia and other former Soviet Union states, the are is called sotka. It is used to describe the size of suburban dacha or allotment garden plots or small city parks where the hectare would be too large, the decare is derived from deka, the prefix for 10 and are, and is equal to 10 ares or 1000 square metres. It is used in Norway and in the former Ottoman areas of the Middle East, the hectare, although not strictly a unit of SI, is the only named unit of area that is accepted for use within the SI. The United Kingdom, United States, Burma, and to some extent Canada instead use the acre, others, such as South Africa, published conversion factors which were to be used particularly when preparing consolidation diagrams by compilation. In many countries, metrication redefined or clarified existing measures in terms of metric units, non-SI units accepted for use with the International System of Units

17.
Square kilometre
–
Square kilometre or square kilometer, symbol km2, is a multiple of the square metre, the SI unit of area or surface area. For example,3 km2 is equal to 3×2 =3,000,000 m2, topographical map grids are worked out in metres, with the grid lines being 1,000 metres apart. 1,100,000 maps are divided into squares representing 1 km2, each square on the map being one square centimetre in area, for 1,50,000 maps, the grid lines are 2 cm apart. Each square on the map is 2 cm by 2 cm, for 1,25,000 maps, the grid lines are 4 cm apart. Each square on the map is 4 cm by 4 cm, in each case, the grid lines enclose one square kilometre. The area enclosed by the walls of many European medieval cities were about one square kilometre, the approximate area of the old walled cities can often be worked out by fitting the course of the wall to a rectangle or an oval. Examples include Delft, Netherlands 52°0′54″N 4°21′34″E The walled city of Delft was approximately rectangular, the approximate length of rectangle was about 1.30 kilometres. The approximate width of the rectangle was about 0.75 kilometres, a perfect rectangle with these measurements has an area of 1. 30×0.75 =0.9 km2 Lucca 43°50′38″N 10°30′2″E The medieval city is roughly rectangular with rounded north-east and north-west corners. The maximum distance from east to west is 1.36 kilometres, the maximum distance from north to south is 0.80 kilometres. A perfect rectangle of these dimensions would be 1. 36×0.80 =1.088 km2, Brugge 51°12′39″N 3°13′28″E The medieval city of Brugge, a major centre in Flanders, was roughly oval or elliptical in shape with the longer or semi-major axis running north and south. The maximum distance from north to south is 2.53 kilometres, the maximum distance from east to west is 1.81 kilometres. A perfect ellipse of these dimensions would be 2.53 ×1.81 × =3.597 km2. Chester United Kingdom 53°12′1″N 2°52′45″W Chester is one of the smaller English cities that has a city wall. The distance from Northgate to Watergate is about 855 metres. The distance from Eastgate to Westgate is about 589 metres, a perfect rectangle of these dimensions would be × =0.504 km2. Parks come in all sizes, a few are almost exactly one kilometre in area. Here are some examples, Riverside Country Park, UK. Brierley Forest Park, rio de Los Angeles State Park, California, USA Jones County Central Park, Iowa, USA. Using the figures published by golf course architects Crafter and Mogford, assuming a 6,000 metres 18-hole course, an area of 80 hectares needs to be allocated for the course itself

18.
Centiare
–
The hectare is an SI accepted metric system unit of area equal to 100 ares and primarily used in the measurement of land as a metric replacement for the imperial acre. An acre is about 0.405 hectare and one hectare contains about 2.47 acres, in 1795, when the metric system was introduced, the are was defined as 100 square metres and the hectare was thus 100 ares or 1⁄100 km2. When the metric system was further rationalised in 1960, resulting in the International System of Units, the are was not included as a recognised unit. The hectare, however, remains as a non-SI unit accepted for use with the SI units, the metric system of measurement was first given a legal basis in 1795 by the French Revolutionary government. At the first meeting of the CGPM in 1889 when a new standard metre, manufactured by Johnson Matthey & Co of London was adopted, in 1960, when the metric system was updated as the International System of Units, the are did not receive international recognition. The units that were catalogued replicated the recommendations of the CGPM, many farmers, especially older ones, still use the acre for everyday calculations, and convert to hectares only for official paperwork. Farm fields can have long histories which are resistant to change, with names such as the six acre field stretching back hundreds of years. The names centiare, deciare, decare and hectare are derived by adding the standard metric prefixes to the base unit of area. The centiare is a synonym for one square metre, the deciare is ten square metres. The are is a unit of area, equal to 100 square metres and it was defined by older forms of the metric system, but is now outside of the modern International System of Units. It is commonly used to measure real estate, in particular in Indonesia, India, and in French-, Portuguese-, Slovakian-, Serbian-, Czech-, Polish-, Dutch-, in Russia and other former Soviet Union states, the are is called sotka. It is used to describe the size of suburban dacha or allotment garden plots or small city parks where the hectare would be too large, the decare is derived from deka, the prefix for 10 and are, and is equal to 10 ares or 1000 square metres. It is used in Norway and in the former Ottoman areas of the Middle East, the hectare, although not strictly a unit of SI, is the only named unit of area that is accepted for use within the SI. The United Kingdom, United States, Burma, and to some extent Canada instead use the acre, others, such as South Africa, published conversion factors which were to be used particularly when preparing consolidation diagrams by compilation. In many countries, metrication redefined or clarified existing measures in terms of metric units, non-SI units accepted for use with the International System of Units

19.
Acre
–
The acre is a unit of land area used in the imperial and US customary systems. It is defined as the area of 1 chain by 1 furlong, lucia, St. Helena, St. Kitts and Nevis, St. Vincent and the Grenadines, Turks and Caicos, the United Kingdom, the United States and the US Virgin Islands. The international symbol of the acre is ac, the most commonly used acre today is the international acre. In the United States both the international acre and the US survey acre are in use, but differ by two parts per million, see below. The most common use of the acre is to measure tracts of land, one international acre is defined as exactly 4,046.8564224 square metres. An acre was defined in the Middle Ages, being the amount of land that could be ploughed in one day with a yoke of oxen. One acre equals 0.0015625 square miles,4,840 square yards,43,560 square feet or about 4,047 square metres. While all modern variants of the acre contain 4,840 square yards, there are definitions of a yard. A square enclosing one acre is approximately 69.57 yards, as a unit of measure, an acre has no prescribed shape, any area of 43,560 square feet is an acre. In the international yard and pound agreement of 1959 the United States, consequently, the international acre is exactly 4,046.8564224 square metres. The US survey acre is about 4,046.872609874252 square metres, its value is based on an inch defined by 1 metre =39.37 inches exactly. Surveyors in the United States use both international and survey feet, and consequently, both varieties of acre. Since the difference between the US survey acre and international acre is only about a quarter of the size of an A4 sheet of paper, areas are seldom measured with sufficient accuracy for the different definitions to be detectable. In India, residential plots are measured in cents or decimal, in Sri Lanka the division of an acre into 160 perches or 4 roods is common. To be more exact, one acre is 90.75 percent of a 100 yards long by 53.33 yards wide American football field, the full field, including the end zones, covers approximately 1.32 acres. For residents of countries, the acre might be envisaged as approximately half of a 105 metres long by 68 metres wide association football pitch. It may also be remembered as 44,000 square feet, in English it was historically spelled aker. The acre was approximately the amount of land tillable by a yoke of oxen in one day and this explains one definition as the area of a rectangle with sides of length one chain and one furlong

20.
Conversion of units
–
Conversion of units is the conversion between different units of measurement for the same quantity, typically through multiplicative conversion factors. The process of conversion depends on the situation and the intended purpose. This may be governed by regulation, contract, technical specifications or other published standards, engineering judgment may include such factors as, The precision and accuracy of measurement and the associated uncertainty of measurement. The statistical confidence interval or tolerance interval of the initial measurement, the number of significant figures of the measurement. The intended use of the measurement including the engineering tolerances, historical definitions of the units and their derivatives used in old measurements, e. g. international foot vs. Some conversions from one system of units to another need to be exact and this is sometimes called soft conversion. It does not involve changing the configuration of the item being measured. By contrast, a conversion or an adaptive conversion may not be exactly equivalent. It changes the measurement to convenient and workable numbers and units in the new system and it sometimes involves a slightly different configuration, or size substitution, of the item. Nominal values are allowed and used. A conversion factor is used to change the units of a quantity without changing its value. The unity bracket method of unit conversion consists of a fraction in which the denominator is equal to the numerator, because of the identity property of multiplication, the value of a number will not change as long as it is multiplied by one. Also, if the numerator and denominator of a fraction are equal to each other, so as long as the numerator and denominator of the fraction are equivalent, they will not affect the value of the measured quantity. There are many applications that offer the thousands of the various units with conversions. For example, the free software movement offers a command line utility GNU units for Linux and this article gives lists of conversion factors for each of a number of physical quantities, which are listed in the index. For each physical quantity, a number of different units are shown, Conversion between units in the metric system can be discerned by their prefixes and are thus not listed in this article. Exceptions are made if the unit is known by another name. Within each table, the units are listed alphabetically, and the SI units are highlighted, notes, See Weight for detail of mass/weight distinction and conversion