The apparent magnitude of an astronomical object is a number, a measure of its brightness as seen by an observer on Earth. The magnitude scale is logarithmic. A difference of 1 in magnitude corresponds to a change in brightness by a factor of 5√100, or about 2.512. The brighter an object appears, the lower its magnitude value, with the brightest astronomical objects having negative apparent magnitudes: for example Sirius at −1.46. The measurement of apparent magnitudes or brightnesses of celestial objects is known as photometry. Apparent magnitudes are used to quantify the brightness of sources at ultraviolet and infrared wavelengths. An apparent magnitude is measured in a specific passband corresponding to some photometric system such as the UBV system. In standard astronomical notation, an apparent magnitude in the V filter band would be denoted either as mV or simply as V, as in "mV = 15" or "V = 15" to describe a 15th-magnitude object; the scale used to indicate magnitude originates in the Hellenistic practice of dividing stars visible to the naked eye into six magnitudes.
The brightest stars in the night sky were said to be of first magnitude, whereas the faintest were of sixth magnitude, the limit of human visual perception. Each grade of magnitude was considered twice the brightness of the following grade, although that ratio was subjective as no photodetectors existed; this rather crude scale for the brightness of stars was popularized by Ptolemy in his Almagest and is believed to have originated with Hipparchus. In 1856, Norman Robert Pogson formalized the system by defining a first magnitude star as a star, 100 times as bright as a sixth-magnitude star, thereby establishing the logarithmic scale still in use today; this implies that a star of magnitude m is about 2.512 times as bright as a star of magnitude m + 1. This figure, the fifth root of 100, became known as Pogson's Ratio; the zero point of Pogson's scale was defined by assigning Polaris a magnitude of 2. Astronomers discovered that Polaris is variable, so they switched to Vega as the standard reference star, assigning the brightness of Vega as the definition of zero magnitude at any specified wavelength.
Apart from small corrections, the brightness of Vega still serves as the definition of zero magnitude for visible and near infrared wavelengths, where its spectral energy distribution approximates that of a black body for a temperature of 11000 K. However, with the advent of infrared astronomy it was revealed that Vega's radiation includes an Infrared excess due to a circumstellar disk consisting of dust at warm temperatures. At shorter wavelengths, there is negligible emission from dust at these temperatures. However, in order to properly extend the magnitude scale further into the infrared, this peculiarity of Vega should not affect the definition of the magnitude scale. Therefore, the magnitude scale was extrapolated to all wavelengths on the basis of the black-body radiation curve for an ideal stellar surface at 11000 K uncontaminated by circumstellar radiation. On this basis the spectral irradiance for the zero magnitude point, as a function of wavelength, can be computed. Small deviations are specified between systems using measurement apparatuses developed independently so that data obtained by different astronomers can be properly compared, but of greater practical importance is the definition of magnitude not at a single wavelength but applying to the response of standard spectral filters used in photometry over various wavelength bands.
With the modern magnitude systems, brightness over a wide range is specified according to the logarithmic definition detailed below, using this zero reference. In practice such apparent magnitudes do not exceed 30; the brightness of Vega is exceeded by four stars in the night sky at visible wavelengths as well as the bright planets Venus and Jupiter, these must be described by negative magnitudes. For example, the brightest star of the celestial sphere, has an apparent magnitude of −1.4 in the visible. Negative magnitudes for other bright astronomical objects can be found in the table below. Astronomers have developed other photometric zeropoint systems as alternatives to the Vega system; the most used is the AB magnitude system, in which photometric zeropoints are based on a hypothetical reference spectrum having constant flux per unit frequency interval, rather than using a stellar spectrum or blackbody curve as the reference. The AB magnitude zeropoint is defined such that an object's AB and Vega-based magnitudes will be equal in the V filter band.
As the amount of light received by a telescope is reduced by transmission through the Earth's atmosphere, any measurement of apparent magnitude is corrected for what it would have been as seen from above the atmosphere. The dimmer an object appears, the higher the numerical value given to its apparent magnitude, with a difference of 5 magnitudes corresponding to a brightness factor of 100. Therefore, the apparent magnitude m, in the spectral band x, would be given by m x = − 5 log 100 , more expressed in terms of common logarithms as m x
In astronomy, stellar classification is the classification of stars based on their spectral characteristics. Electromagnetic radiation from the star is analyzed by splitting it with a prism or diffraction grating into a spectrum exhibiting the rainbow of colors interspersed with spectral lines; each line indicates a particular chemical element or molecule, with the line strength indicating the abundance of that element. The strengths of the different spectral lines vary due to the temperature of the photosphere, although in some cases there are true abundance differences; the spectral class of a star is a short code summarizing the ionization state, giving an objective measure of the photosphere's temperature. Most stars are classified under the Morgan-Keenan system using the letters O, B, A, F, G, K, M, a sequence from the hottest to the coolest; each letter class is subdivided using a numeric digit with 0 being hottest and 9 being coolest. The sequence has been expanded with classes for other stars and star-like objects that do not fit in the classical system, such as class D for white dwarfs and classes S and C for carbon stars.
In the MK system, a luminosity class is added to the spectral class using Roman numerals. This is based on the width of certain absorption lines in the star's spectrum, which vary with the density of the atmosphere and so distinguish giant stars from dwarfs. Luminosity class 0 or Ia+ is used for hypergiants, class I for supergiants, class II for bright giants, class III for regular giants, class IV for sub-giants, class V for main-sequence stars, class sd for sub-dwarfs, class D for white dwarfs; the full spectral class for the Sun is G2V, indicating a main-sequence star with a temperature around 5,800 K. The conventional color description takes into account only the peak of the stellar spectrum. In actuality, stars radiate in all parts of the spectrum; because all spectral colors combined appear white, the actual apparent colors the human eye would observe are far lighter than the conventional color descriptions would suggest. This characteristic of'lightness' indicates that the simplified assignment of colors within the spectrum can be misleading.
Excluding color-contrast illusions in dim light, there are indigo, or violet stars. Red dwarfs are a deep shade of orange, brown dwarfs do not appear brown, but hypothetically would appear dim grey to a nearby observer; the modern classification system is known as the Morgan–Keenan classification. Each star is assigned a spectral class from the older Harvard spectral classification and a luminosity class using Roman numerals as explained below, forming the star's spectral type. Other modern stellar classification systems, such as the UBV system, are based on color indexes—the measured differences in three or more color magnitudes; those numbers are given labels such as "U-V" or "B-V", which represent the colors passed by two standard filters. The Harvard system is a one-dimensional classification scheme by astronomer Annie Jump Cannon, who re-ordered and simplified a prior alphabetical system. Stars are grouped according to their spectral characteristics by single letters of the alphabet, optionally with numeric subdivisions.
Main-sequence stars vary in surface temperature from 2,000 to 50,000 K, whereas more-evolved stars can have temperatures above 100,000 K. Physically, the classes indicate the temperature of the star's atmosphere and are listed from hottest to coldest; the spectral classes O through M, as well as other more specialized classes discussed are subdivided by Arabic numerals, where 0 denotes the hottest stars of a given class. For example, A0 denotes A9 denotes the coolest ones. Fractional numbers are allowed; the Sun is classified as G2. Conventional color descriptions are traditional in astronomy, represent colors relative to the mean color of an A class star, considered to be white; the apparent color descriptions are what the observer would see if trying to describe the stars under a dark sky without aid to the eye, or with binoculars. However, most stars in the sky, except the brightest ones, appear white or bluish white to the unaided eye because they are too dim for color vision to work. Red supergiants are cooler and redder than dwarfs of the same spectral type, stars with particular spectral features such as carbon stars may be far redder than any black body.
The fact that the Harvard classification of a star indicated its surface or photospheric temperature was not understood until after its development, though by the time the first Hertzsprung–Russell diagram was formulated, this was suspected to be true. In the 1920s, the Indian physicist Meghnad Saha derived a theory of ionization by extending well-known ideas in physical chemistry pertaining to the dissociation of molecules to the ionization of atoms. First he applied it to the solar chromosphere to stellar spectra. Harvard astronomer Cecilia Payne demonstrated that the O-B-A-F-G-K-M spectral sequence is a sequence in temperature; because the classification sequence predates our understanding that it is a temperature sequence, the placement of a spectrum into a given subtype, such as B3 or A7, depends upon estimates of the strengths of absorption features in stellar spectra. As a result, these subtypes are not evenly divided into any sort of mathematically representable intervals; the Yerkes spectral classification called the MKK system from the authors' initial
Proper motion is the astronomical measure of the observed changes in the apparent places of stars or other celestial objects in the sky, as seen from the center of mass of the Solar System, compared to the abstract background of the more distant stars. The components for proper motion in the equatorial coordinate system are given in the direction of right ascension and of declination, their combined value is computed as the total proper motion. It has dimensions of angle per time arcseconds per year or milliarcseconds per year. Knowledge of the proper motion and radial velocity allows calculations of true stellar motion or velocity in space in respect to the Sun, by coordinate transformation, the motion in respect to the Milky Way. Proper motion is not "proper", because it includes a component due to the motion of the Solar System itself. Over the course of centuries, stars appear to maintain nearly fixed positions with respect to each other, so that they form the same constellations over historical time.
Ursa Major or Crux, for example, looks nearly the same now. However, precise long-term observations show that the constellations change shape, albeit slowly, that each star has an independent motion; this motion is caused by the movement of the stars relative to the Solar System. The Sun travels in a nearly circular orbit about the center of the Milky Way at a speed of about 220 km/s at a radius of 8 kPc from the center, which can be taken as the rate of rotation of the Milky Way itself at this radius; the proper motion is a two-dimensional vector and is thus defined by two quantities: its position angle and its magnitude. The first quantity indicates the direction of the proper motion on the celestial sphere, the second quantity is the motion's magnitude expressed in arcseconds per year or milliarcsecond per year. Proper motion may alternatively be defined by the angular changes per year in the star's right ascension and declination, using a constant epoch in defining these; the components of proper motion by convention are arrived at.
Suppose an object moves from coordinates to coordinates in a time Δt. The proper motions are given by: μ α = α 2 − α 1 Δ t, μ δ = δ 2 − δ 1 Δ t; the magnitude of the proper motion μ is given by the Pythagorean theorem: μ 2 = μ δ 2 + μ α 2 ⋅ cos 2 δ, μ 2 = μ δ 2 + μ α ∗ 2, where δ is the declination. The factor in cos2δ accounts for the fact that the radius from the axis of the sphere to its surface varies as cosδ, for example, zero at the pole. Thus, the component of velocity parallel to the equator corresponding to a given angular change in α is smaller the further north the object's location; the change μα, which must be multiplied by cosδ to become a component of the proper motion, is sometimes called the "proper motion in right ascension", μδ the "proper motion in declination". If the proper motion in right ascension has been converted by cosδ, the result is designated μα*. For example, the proper motion results in right ascension in the Hipparcos Catalogue have been converted. Hence, the individual proper motions in right ascension and declination are made equivalent for straightforward calculations of various other stellar motions.
The position angle θ is related to these components by: μ sin θ = μ α cos δ = μ α ∗, μ cos θ = μ δ. Motions in equatorial coordinates can be converted to motions in galactic coordinates. For the majority of stars seen in the sky, the observed proper motions are small and unremarkable; such stars are either faint or are distant, have changes of below 10 milliarcseconds per year, do not appear to move appreciably over many millennia. A few do have significant motions, are called high-proper motion stars. Motions can be in seemingly random directions. Two or more stars, double stars or open star clusters, which are moving in similar directions, exhibit so-called shared or common proper motion, suggesting they may be gravitationally attached or share similar motion in space. Barnard's Star has the largest proper motion of all stars, moving at 10.3 seconds of arc per year. L
SIMBAD is an astronomical database of objects beyond the Solar System. It is maintained by the Centre de données astronomiques de France. SIMBAD was created by merging the Catalog of Stellar Identifications and the Bibliographic Star Index as they existed at the Meudon Computer Centre until 1979, expanded by additional source data from other catalogues and the academic literature; the first on-line interactive version, known as Version 2, was made available in 1981. Version 3, developed in the C language and running on UNIX stations at the Strasbourg Observatory, was released in 1990. Fall of 2006 saw the release of Version 4 of the database, now stored in PostgreSQL, the supporting software, now written in Java; as of 10 February 2017, SIMBAD contains information for 9,099,070 objects under 24,529,080 different names, with 327,634 bibliographical references and 15,511,733 bibliographic citations. The minor planet 4692 SIMBAD was named in its honour. Planetary Data System – NASA's database of information on SSSB, maintained by JPL and Caltech.
NASA/IPAC Extragalactic Database – a database of information on objects outside the Milky Way maintained by JPL. NASA Exoplanet Archive – an online astronomical exoplanet catalog and data service Bibcode SIMBAD, Strasbourg SIMBAD, Harvard
A constellation is a group of stars that forms an imaginary outline or pattern on the celestial sphere representing an animal, mythological person or creature, a god, or an inanimate object. The origins of the earliest constellations go back to prehistory. People used them to relate stories of their beliefs, creation, or mythology. Different cultures and countries adopted their own constellations, some of which lasted into the early 20th century before today's constellations were internationally recognized. Adoption of constellations has changed over time. Many have changed in shape; some became popular. Others were limited to single nations; the 48 traditional Western constellations are Greek. They are given in Aratus' work Phenomena and Ptolemy's Almagest, though their origin predates these works by several centuries. Constellations in the far southern sky were added from the 15th century until the mid-18th century when European explorers began traveling to the Southern Hemisphere. Twelve ancient constellations belong to the zodiac.
The origins of the zodiac remain uncertain. In 1928, the International Astronomical Union formally accepted 88 modern constellations, with contiguous boundaries that together cover the entire celestial sphere. Any given point in a celestial coordinate system lies in one of the modern constellations; some astronomical naming systems include the constellation where a given celestial object is found to convey its approximate location in the sky. The Flamsteed designation of a star, for example, consists of a number and the genitive form of the constellation name. Other star patterns or groups called asterisms are not constellations per se but are used by observers to navigate the night sky. Examples of bright asterisms include the Pleiades and Hyades within the constellation Taurus or Venus' Mirror in the constellation of Orion.. Some asterisms, like the False Cross, are split between two constellations; the word "constellation" comes from the Late Latin term cōnstellātiō, which can be translated as "set of stars".
The Ancient Greek word for constellation is ἄστρον. A more modern astronomical sense of the term "constellation" is as a recognisable pattern of stars whose appearance is associated with mythological characters or creatures, or earthbound animals, or objects, it can specifically denote the recognized 88 named constellations used today. Colloquial usage does not draw a sharp distinction between "constellations" and smaller "asterisms", yet the modern accepted astronomical constellations employ such a distinction. E.g. the Pleiades and the Hyades are both asterisms, each lies within the boundaries of the constellation of Taurus. Another example is the northern asterism known as the Big Dipper or the Plough, composed of the seven brightest stars within the area of the IAU-defined constellation of Ursa Major; the southern False Cross asterism includes portions of the constellations Carina and Vela and the Summer Triangle.. A constellation, viewed from a particular latitude on Earth, that never sets below the horizon is termed circumpolar.
From the North Pole or South Pole, all constellations south or north of the celestial equator are circumpolar. Depending on the definition, equatorial constellations may include those that lie between declinations 45° north and 45° south, or those that pass through the declination range of the ecliptic or zodiac ranging between 23½° north, the celestial equator, 23½° south. Although stars in constellations appear near each other in the sky, they lie at a variety of distances away from the Earth. Since stars have their own independent motions, all constellations will change over time. After tens to hundreds of thousands of years, familiar outlines will become unrecognizable. Astronomers can predict the past or future constellation outlines by measuring individual stars' common proper motions or cpm by accurate astrometry and their radial velocities by astronomical spectroscopy; the earliest evidence for the humankind's identification of constellations comes from Mesopotamian inscribed stones and clay writing tablets that date back to 3000 BC.
It seems that the bulk of the Mesopotamian constellations were created within a short interval from around 1300 to 1000 BC. Mesopotamian constellations appeared in many of the classical Greek constellations; the oldest Babylonian star catalogues of stars and constellations date back to the beginning in the Middle Bronze Age, most notably the Three Stars Each texts and the MUL. APIN, an expanded and revised version based on more accurate observation from around 1000 BC. However, the numerous Sumerian names in these catalogues suggest that they built on older, but otherwise unattested, Sumerian traditions of the Early Bronze Age; the classical Zodiac is a revision of Neo-Babylonian constellations from the 6th century BC. The Greeks adopted the Babylonian constellations in the 4th century BC. Twenty Ptolemaic constellations are from the Ancient Near East. Another ten have the same stars but different names. Biblical scholar, E. W. Bullinger interpreted some of the creatures mentioned in the books of Ezekiel and Revelation as the middle signs of the four quarters of the Zodiac, with the Lion as Leo, the Bull as Taurus, the Man representing Aquarius and the Eagle standing in for Scorpio.
The biblical Book of Job also
Right ascension is the angular distance of a particular point measured eastward along the celestial equator from the Sun at the March equinox to the point above the earth in question. When paired with declination, these astronomical coordinates specify the direction of a point on the celestial sphere in the equatorial coordinate system. An old term, right ascension refers to the ascension, or the point on the celestial equator that rises with any celestial object as seen from Earth's equator, where the celestial equator intersects the horizon at a right angle, it contrasts with oblique ascension, the point on the celestial equator that rises with any celestial object as seen from most latitudes on Earth, where the celestial equator intersects the horizon at an oblique angle. Right ascension is the celestial equivalent of terrestrial longitude. Both right ascension and longitude measure an angle from a primary direction on an equator. Right ascension is measured from the Sun at the March equinox i.e. the First Point of Aries, the place on the celestial sphere where the Sun crosses the celestial equator from south to north at the March equinox and is located in the constellation Pisces.
Right ascension is measured continuously in a full circle from that alignment of Earth and Sun in space, that equinox, the measurement increasing towards the east. As seen from Earth, objects noted to have 12h RA are longest visible at the March equinox. On those dates at midnight, such objects will reach their highest point. How high depends on their declination. Any units of angular measure could have been chosen for right ascension, but it is customarily measured in hours and seconds, with 24h being equivalent to a full circle. Astronomers have chosen this unit to measure right ascension because they measure a star's location by timing its passage through the highest point in the sky as the Earth rotates; the line which passes through the highest point in the sky, called the meridian, is the projection of a longitude line onto the celestial sphere. Since a complete circle contains 24h of right ascension or 360°, 1/24 of a circle is measured as 1h of right ascension, or 15°. A full circle, measured in right-ascension units, contains 24 × 60 × 60 = 86400s, or 24 × 60 = 1440m, or 24h.
Because right ascensions are measured in hours, they can be used to time the positions of objects in the sky. For example, if a star with RA = 1h 30m 00s is at its meridian a star with RA = 20h 00m 00s will be on the/at its meridian 18.5 sidereal hours later. Sidereal hour angle, used in celestial navigation, is similar to right ascension, but increases westward rather than eastward. Measured in degrees, it is the complement of right ascension with respect to 24h, it is important not to confuse sidereal hour angle with the astronomical concept of hour angle, which measures angular distance of an object westward from the local meridian. The Earth's axis rotates westward about the poles of the ecliptic, completing one cycle in about 26,000 years; this movement, known as precession, causes the coordinates of stationary celestial objects to change continuously, if rather slowly. Therefore, equatorial coordinates are inherently relative to the year of their observation, astronomers specify them with reference to a particular year, known as an epoch.
Coordinates from different epochs must be mathematically rotated to match each other, or to match a standard epoch. Right ascension for "fixed stars" near the ecliptic and equator increases by about 3.05 seconds per year on average, or 5.1 minutes per century, but for fixed stars further from the ecliptic the rate of change can be anything from negative infinity to positive infinity. The right ascension of Polaris is increasing quickly; the North Ecliptic Pole in Draco and the South Ecliptic Pole in Dorado are always at right ascension 18h and 6h respectively. The used standard epoch is J2000.0, January 1, 2000 at 12:00 TT. The prefix "J" indicates. Prior to J2000.0, astronomers used the successive Besselian epochs B1875.0, B1900.0, B1950.0. The concept of right ascension has been known at least as far back as Hipparchus who measured stars in equatorial coordinates in the 2nd century BC, but Hipparchus and his successors made their star catalogs in ecliptic coordinates, the use of RA was limited to special cases.
With the invention of the telescope, it became possible for astronomers to observe celestial objects in greater detail, provided that the telescope could be kept pointed at the object for a period of time. The easiest way to do, to use an equatorial mount, which allows the telescope to be aligned with one of its two pivots parallel to the Earth's axis. A motorized clock drive is used with an equatorial mount to cancel out the Earth's rotation; as the equatorial mount became adopted for observation, the equatorial coordinate system, which includes right ascension, was adopted at the same time for simplicity. Equatorial mounts could be pointed at objects with known right ascension and declination by the use of setting circles; the first star catalog to use right ascen
The effective temperature of a body such as a star or planet is the temperature of a black body that would emit the same total amount of electromagnetic radiation. Effective temperature is used as an estimate of a body's surface temperature when the body's emissivity curve is not known; when the star's or planet's net emissivity in the relevant wavelength band is less than unity, the actual temperature of the body will be higher than the effective temperature. The net emissivity may be low due to surface or atmospheric properties, including greenhouse effect; the effective temperature of a star is the temperature of a black body with the same luminosity per surface area as the star and is defined according to the Stefan–Boltzmann law FBol = σTeff4. Notice that the total luminosity of a star is L = 4πR2σTeff4, where R is the stellar radius; the definition of the stellar radius is not straightforward. More rigorously the effective temperature corresponds to the temperature at the radius, defined by a certain value of the Rosseland optical depth within the stellar atmosphere.
The effective temperature and the bolometric luminosity are the two fundamental physical parameters needed to place a star on the Hertzsprung–Russell diagram. Both effective temperature and bolometric luminosity depend on the chemical composition of a star; the effective temperature of our Sun is around 5780 kelvins. Stars have a decreasing temperature gradient; the "core temperature" of the Sun—the temperature at the centre of the Sun where nuclear reactions take place—is estimated to be 15,000,000 K. The color index of a star indicates its temperature from the cool—by stellar standards—red M stars that radiate in the infrared to the hot blue O stars that radiate in the ultraviolet; the effective temperature of a star indicates the amount of heat that the star radiates per unit of surface area. From the warmest surfaces to the coolest is the sequence of stellar classifications known as O, B, A, F, G, K, M. A red star could be a tiny red dwarf, a star of feeble energy production and a small surface or a bloated giant or supergiant star such as Antares or Betelgeuse, either of which generates far greater energy but passes it through a surface so large that the star radiates little per unit of surface area.
A star near the middle of the spectrum, such as the modest Sun or the giant Capella radiates more energy per unit of surface area than the feeble red dwarf stars or the bloated supergiants, but much less than such a white or blue star as Vega or Rigel. To find the effective temperature of a planet, it can be calculated by equating the power received by the planet to the known power emitted by a blackbody of temperature T. Take the case of a planet at a distance D from the star, of luminosity L. Assuming the star radiates isotropically and that the planet is a long way from the star, the power absorbed by the planet is given by treating the planet as a disc of radius r, which intercepts some of the power, spread over the surface of a sphere of radius D; the calculation assumes the planet reflects some of the incoming radiation by incorporating a parameter called the albedo. An albedo of 1 means that all the radiation is reflected, an albedo of 0 means all of it is absorbed; the expression for absorbed power is then: P a b s = L r 2 4 D 2 The next assumption we can make is that the entire planet is at the same temperature T, that the planet radiates as a blackbody.
The Stefan–Boltzmann law gives an expression for the power radiated by the planet: P r a d = 4 π r 2 σ T 4 Equating these two expressions and rearranging gives an expression for the effective temperature: T = L 16 π σ D 2 4 Note that the planet's radius has cancelled out of the final expression. The effective temperature for Jupiter from this calculation is 88 K and 51 Pegasi b is 1,258 K. A better estimate of effective temperature for some planets, such as Jupiter, would need to include the internal heating as a power input; the actual temperature depends on atmosphere effects. The actual temperature from spectroscopic analysis for HD 209458 b is 1,130 K, but the effective temperature is 1,359 K; the internal heating within Jupiter raises the effective temperature to about 152 K. The surface temperature of a planet can be estimated by modifying the effective-temperature calculation to account for emissivity and temperature variation; the area of the planet that absorbs the power from the star is Aabs, some fraction of the total surface area Atotal = 4πr2, where r is the radius of the planet.
This area intercepts some of the power, spread over the surface of a sphere of radius D. We allow the planet to reflect some of the incoming radiation by incorporating a parameter a called the albedo. An albedo of 1 means that all the radiation is reflected, an albedo