# Trigonometric functions

Trigonometry |
---|

Reference |

Laws and theorems |

Calculus |

In mathematics, the **trigonometric functions** (also called **circular functions**, **angle functions** or **goniometric functions**^{[1]}^{[2]}) are functions of an angle. They relate the angles of a triangle to the lengths of its sides. Trigonometric functions are important in the study of triangles and modeling periodic phenomena, among many other applications.

The most familiar trigonometric functions are the sine, cosine, and tangent; in the context of the standard unit circle (a circle with radius 1 unit), where a triangle is formed by a ray starting at the origin and making some angle with the x-axis, the sine of the angle gives the length of the y-component (the opposite to the angle or the rise) of the triangle, the cosine gives the length of the x-component (the adjacent of the angle or the run), and the tangent function gives the slope (y-component divided by the x-component). More precise definitions are detailed below. Trigonometric functions are commonly defined as ratios of two sides of a right triangle containing the angle, and can equivalently be defined as the lengths of various line segments from a unit circle. More modern definitions express them as infinite series or as solutions of certain differential equations, allowing their extension to arbitrary positive and negative values and even to complex numbers.

Trigonometric functions have a wide range of uses including computing unknown lengths and angles in triangles (often right triangles); in this use, trigonometric functions are used, for instance, in navigation, engineering, and physics. A common use in elementary physics is resolving a vector into Cartesian coordinates, the sine and cosine functions are also commonly used to model periodic function phenomena such as sound and light waves, the position and velocity of harmonic oscillators, sunlight intensity and day length, and average temperature variations through the year.

In modern usage, there are six basic trigonometric functions, tabulated here with equations that relate them to one another. Especially with the last four, these relations are often taken as the *definitions* of those functions, but one can define them equally well geometrically, or by other means, and then derive these relations.

## Contents

## Right-angled triangle definitions[edit]

The notion that there should be some standard correspondence between the lengths of the sides of a triangle and the angles of the triangle comes as soon as one recognizes that similar triangles maintain the same ratios between their sides, that is, for any similar triangle the ratio of the hypotenuse (for example) and another of the sides remains the same. If the hypotenuse is twice as long, so are the sides, it is these ratios that the trigonometric functions express.

To define the trigonometric functions for the angle *A*, start with any right triangle that contains the angle *A*, the three sides of the triangle are named as follows:

- The
*hypotenuse*is the side opposite the right angle, in this case side**h**. The hypotenuse is always the longest side of a right-angled triangle. - The
*opposite side*is the side opposite to the angle we are interested in (angle*A*), in this case side**a**. - The
*adjacent side*is the side having both the angles of interest (angle*A*and right-angle*C*), in this case side**b**.

In ordinary Euclidean geometry, according to the triangle postulate, the inside angles of every triangle total 180° (π radians). Therefore, in a right-angled triangle, the two non-right angles total 90° (π/2 radians), so each of these angles must be in the range of (0, π/2) as expressed in interval notation. The following definitions apply to angles in this 0 – π/2 range. They can be extended to the full set of real arguments by using the unit circle, or by requiring certain symmetries and that they be periodic functions, for example, the figure shows sin(*θ*) for angles θ, π − *θ*, π + *θ*, and 2π − *θ* depicted on the unit circle (top) and as a graph (bottom). The value of the sine repeats itself apart from sign in all four quadrants, and if the range of θ is extended to additional rotations, this behavior repeats periodically with a period 2π.

The trigonometric functions are summarized in the following table and described in more detail below, the angle θ is the angle between the hypotenuse and the adjacent line – the angle at *A* in the accompanying diagram.

Function | Abbreviation | Description | Identities (using radians) |
---|---|---|---|

sine | sin | opposite/hypotenuse | |

cosine | cos | adjacent/hypotenuse | |

tangent | tan (or tg) | opposite/adjacent | |

cotangent | cot (or cotan or cotg or ctg or ctn) | adjacent/opposite | |

secant | sec | hypotenuse/adjacent | |

cosecant | csc (or cosec) | hypotenuse/opposite |

### Sine, cosine, and tangent[edit]

The **sine** of an angle is the ratio of the length of the opposite side to the length of the hypotenuse. The word comes from the Latin *sinus* for gulf or bay,^{[3]} since, given a unit circle, it is the side of the triangle on which the angle *opens*; in our case:

The **cosine** (*sine complement*, Latin: *cosinus*, *sinus complementi*) of an angle is the ratio of the length of the adjacent side to the length of the hypotenuse, so called because it is the sine of the complementary or co-angle, the other non-right angle.^{[4]} Because the angle sum of a triangle is π radians, the co-angle B is equal to π/2 − A; so cos A = sin B = sin(π/2 − A). In our case:

The **tangent** of an angle is the ratio of the length of the opposite side to the length of the adjacent side: so called because it can be represented as a line segment tangent to the circle, that is the line that touches the circle, from Latin *linea tangens* or touching line (cf. *tangere*, to touch).^{[5]} In our case:

Tangent may also be represented in terms of sine and cosine, that is:

These ratios do not depend on the size of the particular right triangle chosen, as long as the focus angle is equal, since all such triangles are similar.

The acronyms "SOH-CAH-TOA" ("soak-a-toe", "sock-a-toa", "so-kah-toa") and "OHSAHCOAT" are commonly used trigonometric mnemonics for these ratios.

### Cosecant, secant, and cotangent[edit]

The remaining three functions are best defined using the above three functions, and can be considered their reciprocals.

The **cosecant** (*secant complement*, Latin: *cosecans*, *secans complementi*), csc(*A*) or cosec(*A*), is the reciprocal of sin(*A*); i.e. the ratio of the length of the hypotenuse to the length of the opposite side; so called because it is the secant of the complementary or co-angle:

The **secant** sec(*A*) is the reciprocal of cos(*A*); i.e. the ratio of the length of the hypotenuse to the length of the adjacent side:

It is so called because it represents the line that *cuts* the circle (from Latin: *secare*, to cut).^{[6]}

The **cotangent** (*tangent complement*, Latin: *cotangens*, *tangens complementi*), cot(*A*), ctg(*A*) or ctn(*A*), is the reciprocal of tan(*A*); i.e. the ratio of the length of the adjacent side to the length of the opposite side; so called because it is the tangent of the complementary or co-angle:

### Mnemonics[edit]

Equivalent to the right-triangle definitions, the trigonometric functions can also be defined in terms of the *rise*, *run*, and *slope* of a line segment relative to horizontal. The slope is commonly taught as "rise over run" or rise/run, the three main trigonometric functions are commonly taught in the order sine, cosine, tangent. With a line segment length of 1 (as in a unit circle), the following mnemonic devices show the correspondence of definitions:

- "Sine is first, rise is first" meaning that Sine takes the angle of the line segment and tells its vertical rise when the length of the line is 1.
- "Cosine is second, run is second" meaning that Cosine takes the angle of the line segment and tells its horizontal run when the length of the line is 1.
- "Tangent combines the rise and run" meaning that Tangent takes the angle of the line segment and tells its slope; or alternatively, tells the vertical rise when the line segment's horizontal run is 1.

This shows the main use of tangent and arctangent: converting between the two ways of telling the slant of a line, *i.e.*, angles and slopes. (The arctangent or "inverse tangent" is not to be confused with the *cotangent*, which is cosine divided by sine.)

While the length of the line segment makes no difference for the slope (the slope does not depend on the length of the slanted line), it does affect rise and run. To adjust and find the actual rise and run when the line does not have a length of 1, just multiply the sine and cosine by the line length, for instance, if the line segment has length 5, the run at an angle of 7° is 5 cos(7°)

## Unit-circle definitions[edit]

The six trigonometric functions can also be defined in terms of the unit circle, the circle of radius one centered at the origin. While right-angled triangle definitions permit the definition of the trigonometric functions for angles between 0 and π/2 radians, the unit circle definition extends the definitions of the trigonometric functions to all positive and negative arguments.

The equation for the unit circle is

Let a line through the center O of the circle, making an angle of θ with the positive half of the x-axis. The line intersects the unit circle at a point *A* whose x- and y-coordinates are cos(*θ*) and sin(*θ*) respectively.

Consider the right triangle whose vertices are the point *A*, the center of the circle *O*, and the point *C* of the x-axis, that has the same x-coordinate as *A*. The radius of the circle is equal to the hypotenuse *OA*, and has length 1, so sin(*θ*) = *y*/1 and cos(*θ*) = *x*/1.

For angles greater than 2π or less than −2π, one simply continues to rotate around the circle; sine and cosine are thus periodic functions with period 2π:

for any angle θ and any integer k. This period of a full circle (that is, 2π radians or 360 degrees) is the smallest period of the sine and the cosine.

Above, only sine and cosine were defined directly by the unit circle, but other trigonometric functions can be defined either from sine and cosine by

or as signed lengths of line segments (see the figure, which shows also other trigonometric functions that are no more in use)

The primitive periods of the secant and the cosecant are a full circle, i.e. 2π radians or 360 degrees, and the primitive periods of the tangent and the cotangent is only a half-circle, i.e. π radians or 180 degrees.

## Algebraic values[edit]

The algebraic expressions for sin(0°), sin(30°), sin(45°), sin(60°) and sin(90°) are

respectively. Writing the numerators as square roots of consecutive natural numbers () provides an easy way to remember the values.^{[8]} Such simple expressions generally do not exist for other angles which are rational multiples of a straight angle.

For an angle which, measured in degrees, is a multiple of three, the sine and the cosine may be expressed in terms of square roots, as shown below, these values of the sine and the cosine may thus be constructed by ruler and compass.

For an angle of an integer number of degrees, the sine and the cosine may be expressed in terms of square roots and the cube root of a non-real complex number. Galois theory allows to prove that, if the angle is not a multiple of 3°, non-real cube roots are unavoidable.

For an angle which, measured in degrees, is a rational number, the sine and the cosine are algebraic numbers, which may be expressed in terms of nth roots. This results from the fact that the Galois groups of the cyclotomic polynomials are cyclic.

For an angle which, measured in degrees, is not a rational number, then either the angle or both the sine and the cosine are transcendental numbers, this is a corollary of Baker's theorem, proved in 1966.

### Explicit values[edit]

Algebraic expressions for 15°, 18°, 36°, 54°, 72° and 75° are as follows:

From these, the algebraic expressions for all multiples of 3° can be computed, for example:

Algebraic expressions can be deduced for other angles of an integer number of degrees, for example,

where *z* = *a* + *ib*, and *a* and *b* are the above algebraic expressions for, respectively, cos 3° and sin 3°, and the principal cube root (that is, the cube root with the largest real part) is to be taken.

## Series definitions[edit]

Trigonometric functions are analytic functions. Using only geometry and properties of limits, it can be shown that the derivative of sine is cosine and the derivative of cosine is the negative of sine. One can then use the theory of Taylor series to show that the following identities hold for all real numbers x.^{[9]} Here, and generally in calculus, all angles are measured in radians.

The infinite series appearing in these identities are convergent in the whole complex plane and are often taken as the definitions of the sine and cosine functions of a complex variable. Another standard (and equivalent) definition of the sine and the cosine as functions of a complex variable is through their differential equation, below.

Other series can be found,^{[10]} for the following trigonometric functions:

- U
_{n}is the nth up/down number, - B
_{n}is the nth Bernoulli number, and - E
_{n}(below) is the nth Euler number.

When the series for the tangent and secant functions are expressed in a form in which the denominators are the corresponding factorials, the numerators, called the "tangent numbers" and "secant numbers" respectively, have a combinatorial interpretation: they enumerate alternating permutations of finite sets, of odd cardinality for the tangent series and even cardinality for the secant series.^{[11]} The series itself can be found by a power series solution of the aforementioned differential equation.

From a theorem in complex analysis, there is a unique analytic continuation of this real function to the domain of complex numbers, they have the same Taylor series, and so the trigonometric functions are defined on the complex numbers using the Taylor series above.

There is a series representation as partial fraction expansion where just translated reciprocal functions are summed up, such that the poles of the cotangent function and the reciprocal functions match:^{[12]}

This identity can be proven with the Herglotz trick.^{[13]} Combining the (–*n*)th with the *n*th term lead to absolutely convergent series:

### Relationship to exponential function and complex numbers[edit]

It can be shown from the series definitions^{[14]} that the sine and cosine functions are respectively the imaginary and real parts of the exponential function of a purely imaginary argument. That is, if x is real, we have

and

The latter identity, although primarily established for real x, remains valid for every complex x, and is called Euler's formula.

Euler's formula can be used to derive most trigonometric identities from the properties of the exponential function, by writing sine and cosine as:

It is also sometimes useful to express the complex sine and cosine functions in terms of the real and imaginary parts of their arguments.

This exhibits a deep relationship between the complex sine and cosine functions and their real (sin, cos) and hyperbolic real (sinh, cosh) counterparts.

#### Complex graphs[edit]

In the following graphs, the domain is the complex plane pictured, and the range values are indicated at each point by color. Brightness indicates the size (absolute value) of the range value, with black being zero. Hue varies with argument, or angle, measured from the positive real axis. (more)

## Definitions via differential equations[edit]

Both the sine and cosine functions satisfy the differential equation:

That is to say, each is the additive inverse of its own second derivative. Within the 2-dimensional function space V consisting of all solutions of this equation,

- the sine function is the unique solution satisfying the initial condition and
- the cosine function is the unique solution satisfying the initial condition .

Since the sine and cosine functions are linearly independent, together they form a basis of V, this method of defining the sine and cosine functions is essentially equivalent to using Euler's formula. (See linear differential equation.) It turns out that this differential equation can be used not only to define the sine and cosine functions but also to prove the trigonometric identities for the sine and cosine functions.

Further, the observation that sine and cosine satisfies *y*″ = −*y* means that they are eigenfunctions of the second-derivative operator.

The tangent function is the unique solution of the nonlinear differential equation

satisfying the initial condition *y*(0) = 0. There is a very interesting visual proof that the tangent function satisfies this differential equation.^{[15]}

### The significance of radians[edit]

Radians specify an angle by measuring the length around the path of the unit circle and constitute a special argument to the sine and cosine functions; in particular, only sines and cosines that map radians to ratios satisfy the differential equations that classically describe them. If an argument to sine or cosine in radians is scaled by frequency,

then the derivatives will scale by amplitude.

Here, k is a constant that represents a mapping between units. If x is in degrees, then

This means that the second derivative of a sine in degrees does not satisfy the differential equation

but rather

The cosine's second derivative behaves similarly.

This means that these sines and cosines are different functions, and that the fourth derivative of sine will be sine again only if the argument is in radians.

## Identities[edit]

Many identities interrelate the trigonometric functions, among the most frequently used is the **Pythagorean identity**, which states that for any angle, the square of the sine plus the square of the cosine is 1. This is easy to see by studying a right triangle of hypotenuse 1 and applying the Pythagorean theorem; in symbolic form, the Pythagorean identity is written

which is standard shorthand notation for

Other key relationships are the **sum and difference formulas**, which give the sine and cosine of the sum and difference of two angles in terms of sines and cosines of the angles themselves, these can be derived geometrically, using arguments that date to Ptolemy. One can also produce them algebraically using Euler's formula.

- Sum
- Difference

These in turn lead to the following three-angle formulae:

When the two angles are equal, the sum formulas reduce to simpler equations known as the **double-angle formulae**.

When three angles are equal, the three-angle formulae simplify to

These identities can also be used to derive the product-to-sum identities that were used in antiquity to transform the product of two numbers into a sum of numbers and greatly speed operations, much like the logarithm function.

### Calculus[edit]

For integrals and derivatives of trigonometric functions, see the relevant sections of Differentiation of trigonometric functions, Lists of integrals and List of integrals of trigonometric functions. Below is the list of the derivatives and integrals of the six basic trigonometric functions, the number C is a constant of integration.

### Definitions using functional equations[edit]

In mathematical analysis, one can define the trigonometric functions using functional equations based on properties like the difference formula. Taking as given these formulas, one can prove that only two real functions satisfy those conditions. Symbolically, we say that there exists exactly one pair of real functions – sin and cos – such that for all real numbers x and y, the following equation holds:^{[16]}

with the added condition that

Other derivations, starting from other functional equations, are also possible, and such derivations can be extended to the complex numbers, as an example, this derivation can be used to define trigonometry in Galois fields.

## Computation[edit]

The computation of trigonometric functions is a complicated subject, which can today be avoided by most people because of the widespread availability of computers and scientific calculators that provide built-in trigonometric functions for any angle, this section, however, describes details of their computation in three important contexts: the historical use of trigonometric tables, the modern techniques used by computers, and a few "important" angles where simple exact values are easily found.

The first step in computing any trigonometric function is range reduction—reducing the given angle to a "reduced angle" inside a small range of angles, say 0 to π/2, using the periodicity and symmetries of the trigonometric functions.

Prior to computers, people typically evaluated trigonometric functions by interpolating from a detailed table of their values, calculated to many significant figures, such tables have been available for as long as trigonometric functions have been described (see History below), and were typically generated by repeated application of the half-angle and angle-addition identities starting from a known value (such as sin(π/2) = 1).

Modern computers use a variety of techniques.^{[17]} One common method, especially on higher-end processors with floating point units, is to combine a polynomial or rational approximation (such as Chebyshev approximation, best uniform approximation, and Padé approximation, and typically for higher or variable precisions, Taylor and Laurent series) with range reduction and a table lookup—they first look up the closest angle in a small table, and then use the polynomial to compute the correction.^{[18]} Devices that lack hardware multipliers often use an algorithm called CORDIC (as well as related techniques), which uses only addition, subtraction, bitshift, and table lookup. These methods are commonly implemented in hardware floating-point units for performance reasons.

For very high precision calculations, when series expansion convergence becomes too slow, trigonometric functions can be approximated by the arithmetic-geometric mean, which itself approximates the trigonometric function by the (complex) elliptic integral.^{[19]}

Finally, for some simple angles, the values can be easily computed by hand using the Pythagorean theorem, as in the following examples, for example, the sine, cosine and tangent of any integer multiple of π/60 radians (3°) can be found exactly by hand.

Consider a right triangle where the two other angles are equal, and therefore are both π/4 radians (45°). Then the length of side b and the length of side a are equal; we can choose *a* = *b* = 1. The values of sine, cosine and tangent of an angle of π/4 radians (45°) can then be found using the Pythagorean theorem:

Therefore:

To determine the trigonometric functions for angles of π/3 radians (60°) and π/6 radians (30°), we start with an equilateral triangle of side length 1. All its angles are π/3 radians (60°). By dividing it into two, we obtain a right triangle with π/6 radians (30°) and π/3 radians (60°) angles. For this triangle, the shortest side is 1/2, the next largest side is √3/2 and the hypotenuse is 1. This yields:

### Special values in trigonometric functions[edit]

There are some commonly used special values in trigonometric functions, as shown in the following table.

^{[20]}

The symbol ∞ here represents the point at infinity on the projectively extended real line, the limit on the extended real line is +∞ on one side and -∞ on the other.

## Inverse functions[edit]

The trigonometric functions are periodic, and hence not injective, so strictly they do not have an inverse function. Therefore, to define an inverse function we must restrict their domains so that the trigonometric function is bijective; in the following, the functions on the left are *defined* by the equation on the right; these are not proved identities. The principal inverses are usually defined as:

The notations sin^{−1} and cos^{−1} are often used for arcsin and arccos, etc. When this notation is used, the inverse functions could be confused with the multiplicative inverses of the functions, the notation using the "arc-" prefix avoids such confusion, though "arcsec" for arcsecant can be confused with "arcsecond".

Just like the sine and cosine, the inverse trigonometric functions can also be defined in terms of infinite series, for example,

These functions may also be defined by proving that they are antiderivatives of other functions, the arcsine, for example, can be written as the following integral:

Analogous formulas for the other functions can be found at inverse trigonometric functions. Using the complex logarithm, one can generalize all these functions to complex arguments:

### Connection to the inner product[edit]

In an inner product space, the angle between two non-zero vectors is defined to be

## Properties and applications[edit]

The trigonometric functions, as the name suggests, are of crucial importance in trigonometry, mainly because of the following two results.

### Law of sines[edit]

The **law of sines** states that for an arbitrary triangle with sides a, b, and c and angles opposite those sides A, B and C:

where Δ is the area of the triangle, or, equivalently,

where R is the triangle's circumradius.

It can be proven by dividing the triangle into two right ones and using the above definition of sine, the law of sines is useful for computing the lengths of the unknown sides in a triangle if two angles and one side are known. This is a common situation occurring in *triangulation*, a technique to determine unknown distances by measuring two angles and an accessible enclosed distance.

### Law of cosines[edit]

The **law of cosines** (also known as the cosine formula or cosine rule) is an extension of the Pythagorean theorem:

or equivalently,

In this formula the angle at C is opposite to the side c. This theorem can be proven by dividing the triangle into two right ones and using the Pythagorean theorem.

The law of cosines can be used to determine a side of a triangle if two sides and the angle between them are known, it can also be used to find the cosines of an angle (and consequently the angles themselves) if the lengths of all the sides are known.

### Law of tangents[edit]

The following all form the law of tangents^{[21]}

The explanation of the formulae in words would be cumbersome, but the patterns of sums and differences, for the lengths and corresponding opposite angles, are apparent in the theorem.

### Law of cotangents[edit]

If

- (the radius of the inscribed circle for the triangle)

and

- (the semi-perimeter for the triangle),

then the following all form the law of cotangents^{[21]}

It follows that

In words the theorem is: the cotangent of a half-angle equals the ratio of the semi-perimeter minus the opposite side to the said angle, to the inradius for the triangle.

### Periodic functions[edit]

The trigonometric functions are also important in physics, the sine and the cosine functions, for example, are used to describe simple harmonic motion, which models many natural phenomena, such as the movement of a mass attached to a spring and, for small angles, the pendular motion of a mass hanging by a string. The sine and cosine functions are one-dimensional projections of uniform circular motion.

Trigonometric functions also prove to be useful in the study of general periodic functions, the characteristic wave patterns of periodic functions are useful for modeling recurring phenomena such as sound or light waves.^{[22]}

Under rather general conditions, a periodic function *f*(*x*) can be expressed as a sum of sine waves or cosine waves in a Fourier series.^{[23]} Denoting the sine or cosine basis functions by φ_{k}, the expansion of the periodic function *f*(*t*) takes the form:

For example, the square wave can be written as the Fourier series

In the animation of a square wave at top right it can be seen that just a few terms already produce a fairly good approximation, the superposition of several terms in the expansion of a sawtooth wave are shown underneath.

## History[edit]

While the early study of trigonometry can be traced to antiquity, the trigonometric functions as they are in use today were developed in the medieval period, the chord function was discovered by Hipparchus of Nicaea (180–125 BC) and Ptolemy of Roman Egypt (90–165 AD).

The functions sine and cosine can be traced to the *jyā* and *koti-jyā* functions used in Gupta period Indian astronomy (*Aryabhatiya*, *Surya Siddhanta*), via translation from Sanskrit to Arabic and then from Arabic to Latin.^{[24]}

All six trigonometric functions in current use were known in Islamic mathematics by the 9th century, as was the law of sines, used in solving triangles.^{[25]} al-Khwārizmī produced tables of sines, cosines and tangents. They were studied by authors including Omar Khayyám, Bhāskara II, Nasir al-Din al-Tusi, Jamshīd al-Kāshī (14th century), Ulugh Beg (14th century), Regiomontanus (1464), Rheticus, and Rheticus' student Valentinus Otho.^{[citation needed]}

Madhava of Sangamagrama (c. 1400) made early strides in the analysis of trigonometric functions in terms of infinite series.^{[26]}

The terms *tangent* and *secant* were first introduced in 1583 by the Danish mathematician Thomas Fincke in his book *Geometria rotundi*.^{[27]}

The first published use of the abbreviations *sin*, *cos*, and *tan* is by the 16th century French mathematician Albert Girard.

In a paper published in 1682, Leibniz proved that sin *x* is not an algebraic function of x.^{[28]}

Leonhard Euler's *Introductio in analysin infinitorum* (1748) was mostly responsible for establishing the analytic treatment of trigonometric functions in Europe, also defining them as infinite series and presenting "Euler's formula", as well as the near-modern abbreviations *sin., cos., tang., cot., sec.,* and *cosec.*^{[24]}

A few functions were common historically, but are now seldom used, such as the chord (crd(*θ*) = 2 sin(*θ*/2)), the versine (versin(*θ*) = 1 − cos(*θ*) = 2 sin^{2}(*θ*/2)) (which appeared in the earliest tables^{[24]}), the coversine (coversin(*θ*) = 1 − sin(*θ*) = versin(π/2-*θ*)), the haversine (haversin(*θ*) = 1/2versin(*θ*) = sin^{2}(*θ*/2)),^{[29]} the exsecant (exsec(*θ*) = sec(*θ*) − 1) and the excosecant (excsc(*θ*) = exsec(π/2 − *θ*) = csc(*θ*) − 1). Many more relations between these functions are listed in the article about trigonometric identities.

## Etymology[edit]

The word *sine* derives^{[30]} from Latin *sinus*, meaning "bend; bay", and more specifically "the hanging fold of the upper part of a toga", "the bosom of a garment", which was chosen as the translation of what was interpreted as the Arabic word *jaib*, meaning "pocket" or "fold" in the twelfth-century translations of works by Al-Battani and al-Khwārizmī into Medieval Latin.^{[31]} The choice was based on a misreading of the Arabic written form *j-y-b* (جيب), which itself originated as a transliteration from Sanskrit *jīvā*, which along with its synonym *jyā* (the standard Sanskrit term for the sine) translates to "bowstring", being in turn adopted from Ancient Greek χορδή "string".^{[32]}

The word *tangent* comes from Latin *tangens* meaning "touching", since the line *touches* the circle of unit radius, whereas *secant* stems from Latin *secans*—"cutting"—since the line *cuts* the circle.^{[33]}

The prefix "co-" (in "cosine", "cotangent", "cosecant") is found in Edmund Gunter's *Canon triangulorum* (1620), which defines the *cosinus* as an abbreviation for the *sinus complementi* (sine of the complementary angle) and proceeds to define the *cotangens* similarly.^{[34]}^{[35]}

## See also[edit]

- All Students Take Calculus — a mnemonic for recalling the signs of trigonometric functions in a particular quadrant of a Cartesian plane
- Aryabhata's sine table
- Bhaskara I's sine approximation formula
- Generalized trigonometry
- Generating trigonometric tables
- Hyperbolic function
- List of periodic functions
- List of trigonometric identities
- Madhava series
- Madhava's sine table
- Polar sine — a generalization to vertex angles
- Proofs of trigonometric identities
- Versine — for several less used trigonometric functions

## Notes[edit]

**^**Klein, Christian Felix (1924) [1902].*Elementarmathematik vom höheren Standpunkt aus: Arithmetik, Algebra, Analysis*(in German).**1**(3rd ed.). Berlin: J. Springer.**^**Klein, Christian Felix (2004) [1932].*Elementary Mathematics from an Advanced Standpoint: Arithmetic, Algebra, Analysis*. Translated by Hedrick, E. R.; Noble, C. A. (Translation of 3rd German ed.). Dover Publications, Inc. / The Macmillan Company. ISBN 978-0-48643480-3. ISBN 0-48643480-X. Retrieved 2017-08-13.**^**Oxford English Dictionary, sine,*n.*^{2}**^**Oxford English Dictionary, cosine,*n.***^**Oxford English Dictionary, tangent,*adj. and n.***^**Oxford English Dictionary, secant,*adj.*and*n.***^**Heng, Cheng and Talbert, "Additional Mathematics", page 228**^**Larson, Ron (2013).*Trigonometry*(9th ed.). Cengage Learning. p. 153. ISBN 978-1-285-60718-4. Extract of page 153**^**See Ahlfors, pages 43–44.**^**Abramowitz; Weisstein.**^**Stanley, Enumerative Combinatorics, Vol I., page 149**^**Aigner, Martin; Ziegler, Günter M. (2000).*Proofs from THE BOOK*(Second ed.). Springer-Verlag. p. 149. ISBN 978-3-642-00855-9.**^**Remmert, Reinhold (1991).*Theory of complex functions*. Springer. p. 327. ISBN 0-387-97195-5. Extract of page 327**^**For a demonstration, see Euler's formula#Using power series**^**Needham, Tristan.*Visual Complex Analysis*. ISBN 0-19-853446-9.**^**Kannappan, Palaniappan (2009).*Functional Equations and Inequalities with Applications*. Springer. ISBN 978-0387894911.**^**Kantabutra.**^**However, doing that while maintaining precision is nontrivial, and methods like Gal's accurate tables, Cody and Waite reduction, and Payne and Hanek reduction algorithms can be used.**^**Brent, Richard P. (April 1976). "Fast Multiple-Precision Evaluation of Elementary Functions".*J. ACM*.**23**(2): 242–251. doi:10.1145/321941.321944. ISSN 0004-5411.**^**Abramowitz, Milton and Irene A. Stegun, p.74- ^
^{a}^{b}The Universal Encyclopaedia of Mathematics, Pan Reference Books, 1976, page 529-530. English version George Allen and Unwin, 1964. Translated from the German version Meyers Rechenduden, 1960. **^**Farlow, Stanley J. (1993).*Partial differential equations for scientists and engineers*(Reprint of Wiley 1982 ed.). Courier Dover Publications. p. 82. ISBN 0-486-67620-X.**^**See for example, Folland, Gerald B. (2009). "Convergence and completeness".*Fourier Analysis and its Applications*(Reprint of Wadsworth & Brooks/Cole 1992 ed.). American Mathematical Society. pp. 77ff. ISBN 0-8218-4790-2.- ^
^{a}^{b}^{c}Boyer, Carl B. (1991). A History of Mathematics (Second ed.). John Wiley & Sons, Inc. ISBN 0-471-54397-7, p. 210. **^**Gingerich, Owen (1986). "Islamic Astronomy".**254**. Scientific American: 74. Archived from the original on 2013-10-19. Retrieved 2010-07-13.**^**O'Connor, J. J.; Robertson, E. F. "Madhava of Sangamagrama". School of Mathematics and Statistics University of St Andrews, Scotland. Retrieved 2007-09-08.**^**"Fincke biography". Retrieved 2017-03-15.**^**Bourbaki, Nicolás (1994).*Elements of the History of Mathematics*. Springer.**^**Nielsen (1966, pp. xxiii–xxiv)**^**The anglicized form is first recorded in 1593 in Thomas Fale's*Horologiographia, the Art of Dialling*.**^**Various sources credit the first use of*sinus*to either- Plato Tiburtinus's 1116 translation of the
*Astronomy*of Al-Battani - Gerard of Cremona's translation of the
*Algebra*of al-Khwārizmī - Robert of Chester's 1145 translation of the tables of al-Khwārizmī

*A Note on the History of the Trigonometric Functions*in Ceccarelli (ed.),*International Symposium on History of Machines and Mechanisms*, Springer, 2004

See Maor (1998), chapter 3, for an earlier etymology crediting Gerard.

See Katx, Victor (July 2008).*A history of mathematics*(3rd ed.). Boston: Pearson. p. 210 (sidebar). ISBN 978-0321387004.- Plato Tiburtinus's 1116 translation of the
**^**See Plofker,*Mathematics in India*, Princeton University Press, 2009, p. 257

See "Clark University".

See Maor (1998), chapter 3, regarding the etymology.**^**Oxford English Dictionary**^**Gunter, Edmund (1620).*Canon triangulorum*.**^**Roegel, Denis, ed. (2010-12-06). "A reconstruction of Gunter's Canon triangulorum (1620)" (Research report). HAL. inria-00543938. Archived from the original on 2017-07-28. Retrieved 2017-07-28.

## References[edit]

- Abramowitz, Milton; Stegun, Irene Ann, eds. (1983) [June 1964].
*Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables*. Applied Mathematics Series.**55**(Ninth reprint with additional corrections of tenth original printing with corrections (December 1972); first ed.). Washington D.C.; New York: United States Department of Commerce, National Bureau of Standards; Dover Publications. ISBN 978-0-486-61272-0. LCCN 64-60036. MR 0167642. LCCN 65-12253. - Lars Ahlfors,
*Complex Analysis: an introduction to the theory of analytic functions of one complex variable*, second edition, McGraw-Hill Book Company, New York, 1966. - Boyer, Carl B.,
*A History of Mathematics*, John Wiley & Sons, Inc., 2nd edition. (1991). ISBN 0-471-54397-7. - Gal, Shmuel and Bachelis, Boris. An accurate elementary mathematical library for the IEEE floating point standard, ACM Transactions on Mathematical Software (1991).
- Joseph, George G.,
*The Crest of the Peacock: Non-European Roots of Mathematics*, 2nd ed. Penguin Books, London. (2000). ISBN 0-691-00659-8. - Kantabutra, Vitit, "On hardware for computing exponential and trigonometric functions,"
*IEEE Trans. Computers***45**(3), 328–339 (1996). - Maor, Eli,
*Trigonometric Delights*, Princeton Univ. Press. (1998). Reprint edition (February 25, 2002): ISBN 0-691-09541-8.^{[dead link]} - Needham, Tristan, "Preface"" to
*Visual Complex Analysis*. Oxford University Press, (1999). ISBN 0-19-853446-9. - Nielsen, Kaj L. (1966),
*Logarithmic and Trigonometric Tables to Five Places*(2nd ed.), New York, USA: Barnes & Noble, LCCN 61-9103 - O'Connor, J. J., and E. F. Robertson, "Trigonometric functions",
*MacTutor History of Mathematics archive*. (1996). - O'Connor, J. J., and E. F. Robertson, "Madhava of Sangamagramma",
*MacTutor History of Mathematics archive*. (2000). - Pearce, Ian G., "Madhava of Sangamagramma",
*MacTutor History of Mathematics archive*. (2002). - Weisstein, Eric W., "Tangent" from
*MathWorld*, accessed 21 January 2006.

## External links[edit]

Wikibooks has a book on the topic of: Trigonometry |

- Hazewinkel, Michiel, ed. (2001) [1994], "Trigonometric functions",
*Encyclopedia of Mathematics*, Springer Science+Business Media B.V. / Kluwer Academic Publishers, ISBN 978-1-55608-010-4 - Visionlearning Module on Wave Mathematics
- GonioLab Visualization of the unit circle, trigonometric and hyperbolic functions