A county seat is an administrative center, seat of government, or capital city of a county or civil parish. The term is used in Canada, Romania and the United States. County towns have a similar function in the United Kingdom and Republic of Ireland, in Jamaica. In most of the United States, counties are the political subdivisions of a state; the city, town, or populated place that houses county government is known as the seat of its respective county. The county legislature, county courthouse, sheriff's department headquarters, hall of records and correctional facility are located in the county seat though some functions may be located or conducted in other parts of the county if it is geographically large. A county seat is but not always, an incorporated municipality; the exceptions include the county seats of counties that have no incorporated municipalities within their borders, such as Arlington County, Virginia. Ellicott City, the county seat of Howard County, is the largest unincorporated county seat in the United States, followed by Towson, the county seat of Baltimore County, Maryland.
Some county seats may not be incorporated in their own right, but are located within incorporated municipalities. For example, Cape May Court House, New Jersey, though unincorporated, is a section of Middle Township, an incorporated municipality. In some of the colonial states, county seats include or included "Court House" as part of their name. In the Canadian provinces of Prince Edward Island, New Brunswick, Nova Scotia, the term "shire town" is used in place of county seat. County seats in Taiwan are the administrative centers of the counties. There are 13 county seats in Taiwan, which are in the forms of county-administered city, urban township or rural township. Most counties have only one county seat. However, some counties in Alabama, Georgia, Kentucky, Mississippi, New Hampshire, New York, Vermont have two or more county seats located on opposite sides of the county. An example is Harrison County, which lists both Biloxi and Gulfport as county seats; the practice of multiple county seat towns dates from the days.
There have been few efforts to eliminate the two-seat arrangement, since a county seat is a source of pride for the towns involved. There are 36 counties with multiple county seats in 11 states: Coffee County, Alabama St. Clair County, Alabama Arkansas County, Arkansas Carroll County, Arkansas Clay County, Arkansas Craighead County, Arkansas Franklin County, Arkansas Logan County, Arkansas Mississippi County, Arkansas Prairie County, Arkansas Sebastian County, Arkansas Yell County, Arkansas Columbia County, Georgia Lee County, Iowa Campbell County, Kentucky Kenton County, Kentucky Essex County, Massachusetts Middlesex County, Massachusetts Plymouth County, Massachusetts Bolivar County, Mississippi Carroll County, Mississippi Chickasaw County, Mississippi Harrison County, Mississippi Hinds County, Mississippi Jasper County, Mississippi Jones County, Mississippi Panola County, Mississippi Tallahatchie County, Mississippi Yalobusha County, Mississippi Jackson County, Missouri Hillsborough County, New Hampshire Seneca County, New York Bennington County, Vermont In New England, the town, not the county, is the primary division of local government.
Counties in this region have served as dividing lines for the states' judicial systems. Connecticut and Rhode Island have no county level of thus no county seats. In Vermont and Maine the county seats are designated shire towns. County government consists only of a Superior Court and Sheriff, both located in the respective shire town. Bennington County has two shire towns. In Massachusetts, most government functions which would otherwise be performed by county governments in other states are performed by town or city governments; as such, Massachusetts has dissolved many of its county governments, the state government now operates the registries of deeds and sheriff's offices in those counties. In Virginia, a county seat may be an independent city surrounded by, but not part of, the county of which it is the administrative center. Two counties in South Dakota have their county seat and government services centered in a neighboring county, their county-level services are provided by Fall River Tripp County, respectively.
In Louisiana, divided into parishes rather than counties, county seats are referred to as parish seats. Alaska is divided into boroughs rather than counties; the Unorganized Borough, which covers 49 % of Alaska's area, has equivalent. The state with the most counties is Texas, with 254, the state with the fewest counties is Delaware, with 3. County seat war Administrative center County town, administrative centres in Ireland and the UK Chef-lieu, administrative centres in Algeria, Luxembourg, France and Tunisia Municipality, equivalent to county in many c
A civil township is a used unit of local government in the United States, subordinate to a county. The term town is used in New England, New York, Wisconsin to refer to the equivalent of the civil township in these states. Specific responsibilities and the degree of autonomy vary based on each state. Civil townships are distinct from survey townships, but in states that have both, the boundaries coincide and may geographically subdivide a county; the U. S. Census Bureau classifies civil townships as minor civil divisions. There are 20 states with civil townships. Township functions are overseen by a governing board and a clerk or trustee. Township officers include justice of the peace, road commissioner, assessor and surveyor. In the 20th century, many townships added a township administrator or supervisor to the officers as an executive for the board. In some cases, townships run local libraries, senior citizen services, youth services, disabled citizen services, emergency assistance, cemetery services.
In some states, a township and a municipality, coterminous with that township may wholly or consolidate their operations. Depending on the state, the township government has varying degrees of authority. In the Upper Midwestern states near the Great Lakes, civil townships, are but not always, overlaid on survey townships; the degree to which these townships are functioning governmental entities varies from state to state and in some cases within a state. For example, townships in the northern part of Illinois are active in providing public services — such as road maintenance, after-school care, senior services — whereas townships in southern Illinois delegate these services to the county. Most townships in Illinois provide services such as snow removal, senior transportation, emergency services to households residing in unincorporated parts of the county; the townships in Illinois each have a township board, whose board members were called township trustees, a single township supervisor. In contrast, civil townships in Indiana are operated in a consistent manner statewide and tend to be well organized, with each served by a single township trustee and a three-member board.
Civil townships in these states are not incorporated, nearby cities may annex land in adjoining townships with relative ease. In Michigan, general law townships are corporate entities, some can become reformulated as charter townships, a status intended to protect against annexation from nearby municipalities and which grants the township some home rule powers similar to cities. In Wisconsin, civil townships are known as "towns" rather than townships, but they function the same as in neighboring states. In Minnesota, state statute refers to such entities as towns yet requires them to have a name in the form "Name Township". In both documents and conversation, "town" and "township" are used interchangeably. Minnesota townships can be either Non-Urban or Urban, but this is not reflected in the township's name. In Ohio, a city or village is overlaid onto a township unless it withdraws by establishing a paper township. Where the paper township does not extend to the city limits, property owners pay taxes for both the township and municipality, though these overlaps are sometimes overlooked by mistake.
Ten other states allow townships and municipalities to overlap. In Kansas, some civil townships provide services such as road maintenance and fire protection services not provided by the county. In New England, the states are subdivided into towns, which are functioning municipal corporations that provide most local services. While counties exist in New England, for the most part they serve as dividing lines for state judicial systems. With the exception of a few remote areas of New Hampshire and Maine, every square foot of New England lies within the borders of an incorporated town. New England has cities, most of which are towns whose residents have voted to replace the town meeting form of government with a city form. In portions of New Hampshire and Maine, county subdivisions that are not incorporated are referred to as townships, or by other terms such as "gore", "grant", "location", "plantation", or "purchase". In New York, counties are further subdivided into towns and cities, the principal forms of local government.
Towns fulfill a function similar to those of townships in other states. As is the case in most of New England, every square foot of New York's territory is incorporated. New York towns contain one or more incorporated villages, village residents pay both town and village taxes. Towns include a number of unincorporated hamlets. A Pennsylvania township is a unit of local government, responsible for services such as police departments, local road and street maintenance, it acts the same as a borough. Townships were established based on convenient geographical boundaries and vary in size from six to fifty-two square miles. A New Jersey township is similar, in that it is a form of municipal government equal in status to a village, borough, or city, provides similar services to a Pennsylvania township. In the South, outside cities and towns there is no local government other than the county. North Carolina is no exception to that rule, but it does have townships as minor geographical subdivisions of counties, including
A ZIP Code is a postal code used by the United States Postal Service in a system it introduced in 1963. The term ZIP is an acronym for Zone Improvement Plan; the basic format consists of five digits. An extended ZIP+4 code was introduced in 1983 which includes the five digits of the ZIP Code, followed by a hyphen and four additional digits that reference a more specific location; the term ZIP Code was registered as a servicemark by the U. S. Postal Service, but its registration has since expired; the early history and context of postal codes began with postal district/zone numbers. The United States Post Office Department implemented postal zones for numerous large cities in 1943. For example: The "16" was the number of the postal zone in the specific city. By the early 1960s, a more organized system was needed, non-mandatory five-digit ZIP Codes were introduced nationwide on July 1, 1963; the USPOD issued its Publication 59: Abbreviations for Use with ZIP Code on October 1, 1963, with the list of two-letter state abbreviations which are written with both letters capitalized.
An earlier list in June had proposed capitalized abbreviations ranging from two to five letters. According to Publication 59, the two-letter standard was "based on a maximum 23-position line, because this has been found to be the most universally acceptable line capacity basis for major addressing systems", which would be exceeded by a long city name combined with a multi-letter state abbreviation, such as "Sacramento, Calif." along with the ZIP Code. The abbreviations have remained unchanged, with the exception of Nebraska, changed from NB to NE in 1969 at the request of the Canadian postal administration, to avoid confusion with the Canadian province of New Brunswick. Robert Moon is considered the father of the ZIP Code; the post office only credits Moon with the first three digits of the ZIP Code, which describe the sectional center facility or "sec center." An SCF is a central mail processing facility with those three digits. The fourth and fifth digits, which give a more precise locale within the SCF, were proposed by Henry Bentley Hahn Sr.
The SCF sorts mail to all post offices with those first three digits in their ZIP Codes. The mail is sorted according to the final two digits of the ZIP Code and sent to the corresponding post offices in the early morning. Sectional centers do not deliver mail and are not open to the public, most of their employees work the night shift. Mail picked up at post offices is sent to their own SCF in the afternoon, where the mail is sorted overnight. In the case of large cities, the last two digits coincide with the older postal zone number thus: In 1967, these became mandatory for second- and third-class bulk mailers, the system was soon adopted generally; the United States Post Office used a cartoon character, which it called Mr. ZIP, to promote the use of the ZIP Code, he was depicted with a legend such as "USE ZIP CODE" in the selvage of panes of postage stamps or on the covers of booklet panes of stamps. In 1971 Elmira Star-Gazette reporter Dick Baumbach found out the White House was not using a ZIP Code on its envelopes.
Herb Klein, special assistant to President Nixon, responded by saying the next printing of envelopes would include the ZIP Code. In 1983, the U. S. Postal Service introduced an expanded ZIP Code system that it called ZIP+4 called "plus-four codes", "add-on codes", or "add-ons". A ZIP+4 Code uses the basic five-digit code plus four additional digits to identify a geographic segment within the five-digit delivery area, such as a city block, a group of apartments, an individual high-volume receiver of mail, a post office box, or any other unit that could use an extra identifier to aid in efficient mail sorting and delivery. However, initial attempts to promote universal use of the new format met with public resistance and today the plus-four code is not required. In general, mail is read by a multiline optical character reader that instantly determines the correct ZIP+4 Code from the address—along with the more specific delivery point—and sprays an Intelligent Mail barcode on the face of the mail piece that corresponds to 11 digits—nine for the ZIP+4 Code and two for the delivery point.
For Post Office Boxes, the general rule is. The add-on code is one of the following: the last four digits of the box number, zero plus the last three digits of the box number, or, if the box number consists of fewer than four digits, enough zeros are attached to the front of the box number to produce a four-digit number. However, there is no uniform rule, so the ZIP+4 Code must be looked up individually for each box; the ZIP Code is translated into an Intelligent Mail barcode, printed on the mailpiece to make it easier for automated machines to sort. A barcode can be printed by the sender, it is better to let the post office put one on. In general, the post office uses OCR technology, though in some cases a human might have to read and enter the address. Customers who send bulk mail can get a discount on postage if they have printed the barcode themselves and have presorted the mai
Race and ethnicity in the United States Census
Race and ethnicity in the United States Census, defined by the federal Office of Management and Budget and the United States Census Bureau, are self-identification data items in which residents choose the race or races with which they most identify, indicate whether or not they are of Hispanic or Latino origin. The racial categories represent a social-political construct for the race or races that respondents consider themselves to be and, "generally reflect a social definition of race recognized in this country." OMB defines the concept of race as outlined for the US Census as not "scientific or anthropological" and takes into account "social and cultural characteristics as well as ancestry", using "appropriate scientific methodologies" that are not "primarily biological or genetic in reference." The race categories include both national-origin groups. Race and ethnicity are considered separate and distinct identities, with Hispanic or Latino origin asked as a separate question. Thus, in addition to their race or races, all respondents are categorized by membership in one of two ethnic categories, which are "Hispanic or Latino" and "Not Hispanic or Latino".
However, the practice of separating "race" and "ethnicity" as different categories has been criticized both by the American Anthropological Association and members of US Commission on Civil Rights. In 1997, OMB issued a Federal Register notice regarding revisions to the standards for the classification of federal data on race and ethnicity. OMB developed race and ethnic standards in order to provide "consistent data on race and ethnicity throughout the Federal Government; the development of the data standards stem in large measure from new responsibilities to enforce civil rights laws." Among the changes, OMB issued the instruction to "mark one or more races" after noting evidence of increasing numbers of interracial children and wanting to capture the diversity in a measurable way and having received requests by people who wanted to be able to acknowledge their or their children's full ancestry rather than identifying with only one group. Prior to this decision, the Census and other government data collections asked people to report only one race.
The OMB states, "many federal programs are put into effect based on the race data obtained from the decennial census. Race data are critical for the basic research behind many policy decisions. States require these data to meet legislative redistricting requirements; the data are needed to monitor compliance with the Voting Rights Act by local jurisdictions". "Data on ethnic groups are important for putting into effect a number of federal statutes. Data on Ethnic Groups are needed by local governments to run programs and meet legislative requirements." The 1790 United States Census was the first census in the history of the United States. The population of the United States was recorded as 3,929,214 as of Census Day, August 2, 1790, as mandated by Article I, Section 2 of the United States Constitution and applicable laws."The law required that every household be visited, that completed census schedules be posted in'two of the most public places within, there to remain for the inspection of all concerned...' and that'the aggregate amount of each description of persons' for every district be transmitted to the president."
This law along with U. S. marshals were responsible for governing the census. One third of the original census data has been lost or destroyed since documentation; the data was lost in 1790–1830 time period and included data from: Connecticut, Maryland, New Hampshire, New York, North Carolina, Rhode Island, South Carolina, Delaware, New Jersey, Virginia. Census data included the name of the head of the family and categorized inhabitants as follows: free white males at least 16 years of age, free white males under 16 years of age, free white females, all other free persons, slaves. Thomas Jefferson the Secretary of State, directed marshals to collect data from all thirteen states, from the Southwest Territory; the census was not conducted in Vermont until 1791, after that state's admission to the Union as the 14th state on March 4 of that year. There was some doubt surrounding the numbers, President George Washington and Thomas Jefferson maintained the population was undercounted; the potential reasons Washington and Jefferson may have thought this could be refusal to participate, poor public transportation and roads, spread out population, restraints of current technology.
No microdata from the 1790 population census is available, but aggregate data for small areas and their compatible cartographic boundary files, can be downloaded from the National Historical Geographic Information System. In 1800 and 1810, the age question regarding free white males was more detailed; the 1820
1940 United States Census
The Sixteenth United States Census, conducted by the Census Bureau, determined the resident population of the United States to be 132,164,569, an increase of 7.3 percent over the 1930 population of 123,202,624 people. The census date of record was April 1, 1940. A number of new questions were asked including where people were 5 years before, highest educational grade achieved, information about wages; this census introduced sampling techniques. Other innovations included a field test of the census in 1939; this was the first census in which every state had a population greater than 100,000. The 1940 census collected the following information: In addition, a sample of individuals were asked additional questions covering age at first marriage and other topics. Full documentation on the 1940 census, including census forms and a procedural history, is available from the Integrated Public Use Microdata Series. Following completion of the census, the original enumeration sheets were microfilmed; as required by Title 13 of the U.
S. Code, access to identifiable information from census records was restricted for 72 years. Non-personally identifiable information Microdata from the 1940 census is available through the Integrated Public Use Microdata Series. Aggregate data for small areas, together with electronic boundary files, can be downloaded from the National Historical Geographic Information System. On April 2, 2012—72 years after the census was taken—microfilmed images of the 1940 census enumeration sheets were released to the public by the National Archives and Records Administration; the records are indexed only by enumeration district upon initial release. Official 1940 census website 1940 Census Records from the U. S. National Archives and Records Administration 1940 Federal Population Census Videos, training videos for enumerators at the U. S. National Archives Selected Historical Decennial Census Population and Housing Counts from the U. S. Census Bureau Snow, Michael S. "Why the huge interest in the 1940 Census?"
CNN. Monday April 9, 2012. 1941 U. S Census Report Contains 1940 Census results 1940 Census Questions Hosted at CensusFinder.com
A census is the procedure of systematically acquiring and recording information about the members of a given population. The term is used in connection with national population and housing censuses; the United Nations defines the essential features of population and housing censuses as "individual enumeration, universality within a defined territory and defined periodicity", recommends that population censuses be taken at least every 10 years. United Nations recommendations cover census topics to be collected, official definitions and other useful information to co-ordinate international practice; the word is of Latin origin: during the Roman Republic, the census was a list that kept track of all adult males fit for military service. The modern census is essential to international comparisons of any kind of statistics, censuses collect data on many attributes of a population, not just how many people there are. Censuses began as the only method of collecting national demographic data, are now part of a larger system of different surveys.
Although population estimates remain an important function of a census, including the geographic distribution of the population, statistics can be produced about combinations of attributes e.g. education by age and sex in different regions. Current administrative data systems allow for other approaches to enumeration with the same level of detail but raise concerns about privacy and the possibility of biasing estimates. A census can be contrasted with sampling in which information is obtained only from a subset of a population. Modern census data are used for research, business marketing, planning, as a baseline for designing sample surveys by providing a sampling frame such as an address register. Census counts are necessary to adjust samples to be representative of a population by weighting them as is common in opinion polling. Stratification requires knowledge of the relative sizes of different population strata which can be derived from census enumerations. In some countries, the census provides the official counts used to apportion the number of elected representatives to regions.
In many cases, a chosen random sample can provide more accurate information than attempts to get a population census. A census is construed as the opposite of a sample as its intent is to count everyone in a population rather than a fraction. However, population censuses rely on a sampling frame to count the population; this is the only way to be sure that everyone has been included as otherwise those not responding would not be followed up on and individuals could be missed. The fundamental premise of a census is that the population is not known and a new estimate is to be made by the analysis of primary data; the use of a sampling frame is counterintuitive as it suggests that the population size is known. However, a census is used to collect attribute data on the individuals in the nation; this process of sampling marks the difference between historical census, a house to house process or the product of an imperial decree, the modern statistical project. The sampling frame used by census is always an address register.
Thus it is not known how many people there are in each household. Depending on the mode of enumeration, a form is sent to the householder, an enumerator calls, or administrative records for the dwelling are accessed; as a preliminary to the dispatch of forms, census workers will check any address problems on the ground. While it may seem straightforward to use the postal service file for this purpose, this can be out of date and some dwellings may contain a number of independent households. A particular problem is what are termed'communal establishments' which category includes student residences, religious orders, homes for the elderly, people in prisons etc; as these are not enumerated by a single householder, they are treated differently and visited by special teams of census workers to ensure they are classified appropriately. Individuals are counted within households and information is collected about the household structure and the housing. For this reason international documents refer to censuses of housing.
The census response is made by a household, indicating details of individuals resident there. An important aspect of census enumerations is determining which individuals can be counted from which cannot be counted. Broadly, three definitions can be used: de facto residence; this is important to consider individuals who have temporary addresses. Every person should be identified uniquely as resident in one place but where they happen to be on Census Day, their de facto residence, may not be the best place to count them. Where an individual uses services may be more useful and this is at their usual, or de jure, residence. An individual may be represented at a permanent address a family home for students or long term migrants, it is necessary to have a precise definition of residence to decide whether visitors to a country should be included in the population count. This is becoming more important as students travel abroad for education for a period of several years. Other groups causing problems of enumeration are new born babies, people away on holiday, people moving home around census day, people without a fixed address.
People having second homes because of working in another part of the country or retaining a holiday cottage are dif
Marriage called matrimony or wedlock, is a or ritually recognised union between spouses that establishes rights and obligations between those spouses, as well as between them and any resulting biological or adopted children and affinity. The definition of marriage varies around the world not only between cultures and between religions, but throughout the history of any given culture and religion, evolving to both expand and constrict in who and what is encompassed, but it is principally an institution in which interpersonal relationships sexual, are acknowledged or sanctioned. In some cultures, marriage is recommended or considered to be compulsory before pursuing any sexual activity; when defined broadly, marriage is considered a cultural universal. A marriage ceremony is known as a wedding. Individuals may marry for several reasons, including legal, libidinal, financial and religious purposes. Whom they marry may be influenced by gender determined rules of incest, prescriptive marriage rules, parental choice and individual desire.
In some areas of the world, arranged marriage, child marriage and sometimes forced marriage, may be practiced as a cultural tradition. Conversely, such practices may be outlawed and penalized in parts of the world out of concerns of the infringement of women's rights, or the infringement of children's rights, because of international law. Around the world in developed democracies, there has been a general trend towards ensuring equal rights within marriage for women and recognizing the marriages of interfaith and same-sex couples; these trends coincide with the broader human rights movement. Marriage can be recognized by a state, an organization, a religious authority, a tribal group, a local community, or peers, it is viewed as a contract. When a marriage is performed and carried out by a government institution in accordance with the marriage laws of the jurisdiction, without religious content, it is a civil marriage. Civil marriage recognizes and creates the rights and obligations intrinsic to matrimony before the state.
When a marriage is performed with religious content under the auspices of a religious institution it is a religious marriage. Religious marriage recognizes and creates the rights and obligations intrinsic to matrimony before that religion. Religious marriage is known variously as sacramental marriage in Catholicism, nikah in Islam, nissuin in Judaism, various other names in other faith traditions, each with their own constraints as to what constitutes, who can enter into, a valid religious marriage; some countries do not recognize locally performed religious marriage on its own, require a separate civil marriage for official purposes. Conversely, civil marriage does not exist in some countries governed by a religious legal system, such as Saudi Arabia, where marriages contracted abroad might not be recognized if they were contracted contrary to Saudi interpretations of Islamic religious law. In countries governed by a mixed secular-religious legal system, such as in Lebanon and Israel, locally performed civil marriage does not exist within the country, preventing interfaith and various other marriages contradicting religious laws from being entered into in the country, civil marriages performed abroad are recognized by the state if they conflict with religious laws.
The act of marriage creates normative or legal obligations between the individuals involved, any offspring they may produce or adopt. In terms of legal recognition, most sovereign states and other jurisdictions limit marriage to opposite-sex couples and a diminishing number of these permit polygyny, child marriages, forced marriages. In modern times, a growing number of countries developed democracies, have lifted bans on and have established legal recognition for the marriages of interfaith and same-sex couples; some cultures allow the dissolution of marriage through annulment. In some areas, child marriages and polygamy may occur in spite of national laws against the practice. Since the late twentieth century, major social changes in Western countries have led to changes in the demographics of marriage, with the age of first marriage increasing, fewer people marrying, more couples choosing to cohabit rather than marry. For example, the number of marriages in Europe decreased by 30% from 1975 to 2005.
In most cultures, married women had few rights of their own, being considered, along with the family's children, the property of the husband. In Europe, the United States, other places in the developed world, beginning in the late 19th century and lasting through the 21st century, marriage has undergone gradual legal changes, aimed at improving the rights of the wife; these changes included giving wives legal identities of their own, abolishing the right of husbands to physically discipline their wives, giving wives property rights, liberalizing divorce laws, providing wives with reproductive rights of their own, requiring a wife's consent when sexual relations occur. These changes have occurred in Western countries. In the 21st century, there continue to be controversies regarding the legal status of married women, legal acceptance of or leniency towards violence within marriage, traditional marriage customs such as dowry and bride price, for