1.
Canada
–
Canada is a country in the northern half of North America. Canadas border with the United States is the worlds longest binational land border, the majority of the country has a cold or severely cold winter climate, but southerly areas are warm in summer. Canada is sparsely populated, the majority of its territory being dominated by forest and tundra. It is highly urbanized with 82 per cent of the 35.15 million people concentrated in large and medium-sized cities, One third of the population lives in the three largest cities, Toronto, Montreal and Vancouver. Its capital is Ottawa, and other urban areas include Calgary, Edmonton, Quebec City, Winnipeg. Various aboriginal peoples had inhabited what is now Canada for thousands of years prior to European colonization. Pursuant to the British North America Act, on July 1,1867, the colonies of Canada, New Brunswick and this began an accretion of provinces and territories to the mostly self-governing Dominion to the present ten provinces and three territories forming modern Canada. With the Constitution Act 1982, Canada took over authority, removing the last remaining ties of legal dependence on the Parliament of the United Kingdom. Canada is a parliamentary democracy and a constitutional monarchy, with Queen Elizabeth II being the head of state. The country is officially bilingual at the federal level and it is one of the worlds most ethnically diverse and multicultural nations, the product of large-scale immigration from many other countries. Its advanced economy is the eleventh largest in the world, relying chiefly upon its abundant natural resources, Canadas long and complex relationship with the United States has had a significant impact on its economy and culture. Canada is a country and has the tenth highest nominal per capita income globally as well as the ninth highest ranking in the Human Development Index. It ranks among the highest in international measurements of government transparency, civil liberties, quality of life, economic freedom, Canada is an influential nation in the world, primarily due to its inclusive values, years of prosperity and stability, stable economy, and efficient military. While a variety of theories have been postulated for the origins of Canada. In 1535, indigenous inhabitants of the present-day Quebec City region used the word to direct French explorer Jacques Cartier to the village of Stadacona, from the 16th to the early 18th century Canada referred to the part of New France that lay along the St. Lawrence River. In 1791, the area became two British colonies called Upper Canada and Lower Canada collectively named The Canadas, until their union as the British Province of Canada in 1841. Upon Confederation in 1867, Canada was adopted as the name for the new country at the London Conference. The transition away from the use of Dominion was formally reflected in 1982 with the passage of the Canada Act, later that year, the name of national holiday was changed from Dominion Day to Canada Day
2.
Boat
–
A boat is a watercraft of a large range of sizes designed to float, plane, work or travel on water. Small boats are found on inland waterways or in protected coastal areas. However, boats such as the whaleboat were designed for operation from a ship in an offshore environment, in naval terms, a boat is a vessel small enough to be carried aboard another vessel. Another less restrictive definition is a vessel that can be lifted out of the water, some definitions do not make a distinction in size, as bulk freighters 1,000 feet long on the Great Lakes are called oreboats. For reasons of tradition, submarines are usually referred to as boats rather than ships, regardless of their size. Ships are generally distinguished from boats based on their size, shape. Boats have a variety of shapes, sizes and construction methods due to their intended purpose. Canoe-type boats have used since prehistoric times and various versions are used throughout the world for transportation. Fishing boats vary widely in style partly to local conditions. Pleasure boats include ski boats, pontoon boats, and sailboats, house boats may be used for vacationing or long-term housing. Small boats can provide transport or convey cargo to and from large ships, lifeboats have rescue and safety functions. Boats can be powered by power, wind power and motor power. Dugouts are the oldest type of boats found by archaeologists, the earliest boats are thought to have been logboats, and the oldest boats found by archaeological excavation date from around 7, 000–10,000 years ago. The oldest recovered boat in the world is the Pesse canoe and this canoe is exhibited in the Drents Museum in Assen, Netherlands. Other very old dugout boats have also been recovered, rafts have operated for at least 8,000 years. A7, 000-year-old seagoing reed boat has been found in Kuwait, boats were used between 4000 and 3000 BC in Sumer, ancient Egypt and in the Indian Ocean. Boats played an important role in the commerce between the Indus Valley Civilization and Mesopotamia, evidence of varying models of boats has also been discovered at various Indus Valley archaeological sites. Uru craft originate in Beypore, a village in south Calicut, Kerala and this type of mammoth wooden ship was constructed using teak, without any iron, and had a transport capacity of 400 tonnes
3.
Fiberglass
–
Fiberglass is a type of fiber-reinforced plastic where the reinforcement fiber is specifically glass fiber. The glass fiber may be arranged, flattened into a sheet. The plastic matrix may be a polymer matrix – most often based on thermosetting polymers such as epoxy, polyester resin. The glass fibers are made of various types of glass depending upon the fiberglass use and these glasses all contain silica or silicate, with varying amounts of oxides of calcium, magnesium, and sometimes boron. To be used in fiberglass, glass fibers have to be made very low levels of defects. Fiberglass is a lightweight material and is used for many products. Although it is not as strong and stiff as composites based on fiber, it is less brittle. Its bulk strength and weight are also better than many metals, other common names for fiberglass are glass-reinforced plastic, glass-fiber reinforced plastic or GFK. Because glass fiber itself is referred to as fiberglass, the composite is also called fiberglass reinforced plastic. This article will adopt the convention that fiberglass refers to the glass fiber reinforced composite material. A patent for this method of producing glass wool was first applied for in 1933, Owens joined with the Corning company in 1935 and the method was adapted by Owens Corning to produce its patented fibreglas in 1936. Originally, fibreglas was a wool with fibers entrapping a great deal of gas, making it useful as an insulator. A suitable resin for combining the fibreglass with a plastic to produce a material was developed in 1936 by du Pont. The first ancestor of modern polyester resins is Cyanamids resin of 1942, peroxide curing systems were used by then. With the combination of fiberglass and resin the gas content of the material was replaced by plastic and this reduced the insulation properties to values typical of the plastic, but now for the first time the composite showed great strength and promise as a structural and building material. Confusingly, many glass fiber composites continued to be called fiberglass, ray Greene of Owens Corning is credited with producing the first composite boat in 1937, but did not proceed further at the time due to the brittle nature of the plastic used. In 1939 Russia was reported to have constructed a boat of plastic materials. The first car to have a body was a 1946 prototype of the Stout Scarab
4.
Rudder
–
A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other conveyance that moves through a fluid medium. On an aircraft the rudder is used primarily to counter adverse yaw, a rudder operates by redirecting the fluid past the hull or fuselage, thus imparting a turning or yawing motion to the craft. In basic form, a rudder is a plane or sheet of material attached with hinges to the crafts stern, tail. Often rudders are shaped so as to minimize hydrodynamic or aerodynamic drag, on simple watercraft, a tiller—essentially, a stick or pole acting as a lever arm—may be attached to the top of the rudder to allow it to be turned by a helmsman. In larger vessels, cables, pushrods, or hydraulics may be used to link rudders to steering wheels, in typical aircraft, the rudder is operated by pedals via mechanical linkages or hydraulics. Generally, a rudder is part of the apparatus of a boat or ship that is fastened outside the hull, that is denoting all different types of oars, paddles. More specifically, the gear of ancient vessels can be classified into side-rudders and stern-mounted rudders. A third term, steering oar, can denote both types, in a Mediterranean context, side-rudders are more specifically called quarter-rudders as the later term designates more exactly the place where the rudder was mounted. Stern-mounted rudders are uniformly suspended at the back of the ship in a central position. S, a steering oar was used at this time because the rudder had not yet been invented. With a single sail, a frequent movement of the oar was required to steer a straight course. The steering oar or steering board is an oar or board to control the direction of a ship or other watercraft prior to the invention of the rudder. It is normally attached to the side in larger vessels, though in smaller ones it is rarely, if ever. Rowing oars set aside for steering appeared on large Egyptian vessels long before the time of Menes, in the Old Kingdom as much as five steering oars are found on each side of passenger boats. The tiller, at first a small pin run through the stock of the steering oar, both the tiller and the introduction of an upright steering post abaft reduced the usual number of necessary steering oars to one each side. In Iran, oars mounted on the side of ships for steering are documented from the 3rd millennium BCE in artwork, wooden models, the strength of the steering oar lay in its combination of effectiveness, adaptability and simpleness. Roman quarter steering oar mounting systems survived mostly intact through the medieval period, by the first half of the 1st century AD, steering gear mounted on the stern were also quite common in Roman river and harbour craft as proved from reliefs and archaeological finds. A tomb plaque of Hadrianic age shows a harbour tug boat in Ostia with a long stern-mounted oar for better leverage, interestingly, the boat already featured a spritsail, adding to the mobility of the harbour vessel. Further attested Roman uses of stern-mounted steering oars includes barges under tow, transport ships for wine casks, also, the well-known Zwammerdam find, a large river barge at the mouth of the Rhine, featured a large steering gear mounted on the stern
5.
Sailboat
–
A sailboat or sailing boat is a boat propelled partly or entirely by sails smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region, although sailboat terminology has varied across history, many terms have specific meanings in the context of modern yachting. A great number of sailboat-types may be distinguished by size, hull configuration, keel type, purpose, number and configuration of masts, and sail plan. Once a common racing configuration, today it gives versatility to cruising boats, a catboat has a single mast mounted far forward and does not carry a jib. Most modern designs have only one sail, the mainsail, however, a dinghy is a type of small open sailboat commonly used for recreation, sail training, and tending a larger vessel. They are popular in youth sailing programs for their short LOA, simple operation and they have three sails, the mainsail, jib, and spinnaker. Ketches are similar to a sloop, but there is a shorter mast astern of the mainmast. The second mast is called the mizzen mast and the sail is called the mizzen sail, a ketch can also be Cutter-rigged with two head sails. A schooner has a mainmast taller than its foremast, distinguishing it from a ketch or a yawl, a schooner can have more than two masts, with the foremast always lower than the foremost main. Traditional topsail schooners have topmasts allowing triangular topsails sails to be flown above their gaff sails, the most common modern sailboat is the sloop, which features one mast and two sails, typically a Bermuda rigged main, and a headsail. This simple configuration is very efficient for sailing into the wind, a smaller headsail is easier for a short-handed crew to manage. A yawl is similar to a ketch, with a mizzen mast carried astern the rudderpost more for balancing the helm than propulsion. Traditional sailboats are monohulls, but multi-hull catamarans and trimarans are gaining popularity, monohull boats generally rely on ballast for stability and usually are displacement hulls. This stabilizing ballast can, in boats designed for racing, be as much as 50% of the weight of the boat and it creates two problems, one, it gives the monohull tremendous inertia, making it less maneuverable and reducing its acceleration. Secondly, unless it has built with buoyant foam or air tanks, if a monohull fills with water. Multihulls rely on the geometry and the stance of the multiple hulls for their stability. Indeed, multihulls are designed to be as light-weight as possible and this absence of ballast also results in some very real performance gains in terms of acceleration, top speed, and maneuverability. The lack of ballast makes it easier to get a multihull on plane, reducing its wetted surface area and thus its drag. The absence of drag improves wind precision
6.
Keel
–
On boats and ships, keel can refer to either of two parts, a structural element that sometimes resembles a fin and protrudes below a boat along the central line, or a hydrodynamic element. As the laying down of the keel is the step in the construction of a ship, in British. Only the ships launching is considered significant in its creation. The word can also be used as a synecdoche to refer to a complete boat, a structural keel is the bottom-most structural member around which the hull of a ship is built. The keel runs along the centerline of the ship, from the bow to the stern. The keel is often the first part of a hull to be constructed. The most common type of keel is the plate keel. A form of keel found on smaller vessels is the bar keel, which may be fitted in trawlers, tugs, and smaller ferries. Where grounding is possible, this type of keel is suitable with its massive scantlings, if a double bottom is fitted, the keel is almost inevitably of the flat plate type, bar keels often being associated with open floors, where the plate keel may also be fitted. Duct keels are provided in the bottom of some vessels and these run from the forward engine room bulkhead to the collision bulkhead and are utilized to carry the double bottom piping. The piping is then accessible when cargo is loaded, the keel surface on the bottom of the hull gives the ship greater directional control and stability. In non-sailing hulls, the helps the hull to move forward. In traditional boat building, this is provided by the structural keel, in modern construction, the bar keel or flat-plate keel performs the same function. There are many types of fixed keels, including full keels, long keels, fin keels, winged keels, bulb keels, the rudimentary purpose of the keel is to convert the sideways motion of the wind when it is abeam into forward motion. A secondary purpose of the keel is to provide ballast, keels are different from centreboards and other types of foils in that keels are made of heavy materials to provide ballast to stabilize the boat. Keels may be fixed, or non-movable, or they may retract to allow sailing in shallower waters, retracting keels may pivot or slide upwards to retract, and are usually retracted with a winch due to the weight of the ballast. Since the keel provides far more stability when lowered than when retracted, types of non-fixed keels include swing keels and canting keels. Canting keels can be found on racing yachts, such as competing in the Volvo Ocean Race
7.
Keelboat
–
A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The two terms may draw from cognate words with different final meaning and they were also used extensively for transporting cargo to market, and for exploration and trading expeditions, for water transport was then most effective means to move bulky or heavy cargo. Keelboats were similar to riverboats, but like other barges were unpowered and were controlled with oars or poles—usually the latter. Keelboats have been used for exploration, such as the Lewis and Clark Expedition, the process of moving a keelboat upriver was extremely difficult, though current dependent. Most of these keelboats were 50 to 80 feet long and 15 feet wide and they usually had a cabin in the middle, but were sometimes constructed with an open deck. Mike Fink is probably the most noted keelboater in history, the Republican had in tow keel boats, the Hoosier Lady and the Hoosier Boy, bringing freight to Lafayette, Messrs Taylor & Harter, Taylor & Li. J. McCormick, J. B. Semans and Hunter, and for Messrs, Ewing of the Bridge at Logansport and this is the first arrival at Lafayette this year. We understand the Republican is going to try and ascend the Wabash at Logansport, the Wabash is in steam boating condition, and we may experience several arrivals, in a few days. The term keel was associated in Great Britain with three particular working boat types, the Norfolk Keel ancestor of the Norfolk Wherry, the Humber Keel and the Tyne Keel and their Keelmen. A keelboat is technically any sailboat with a keel—as opposed to a centerboard or daggerboard, in New Zealand the term keeler is frequently used as a generic alternative - meaning any sailboat with a keel, regardless of size. ISAF usage differentiates keelboats from generally larger yachts, despite overlap in the sizes of boats in the two classes
