# Cubic foot

The **cubic foot** (symbol **ft ^{3}**)

^{[1]}is an imperial and US customary (non-metric) unit of volume, used in the United States, and partially in Canada, and the United Kingdom. It is defined as the volume of a cube with sides of one foot (0.3048 m) in length. Its volume is 28.3168 liters or about

^{1}⁄

_{35}of a cubic meter.

At 60 °F (16 °C), a cubic foot of water weighs 62.36630 pounds (28.28888 kg).

## Contents

## Conversions[edit]

1 cubic foot | = 1728 cubic inches | |

= ^{1}⁄_{27} of a cubic yard
| ||

≈ 037 cu yd 0.037 | ||

= 316846592 0.028cubic meters | ||

= 846592 28.316liters | ||

= ^{576}⁄_{77} US fluid gallons
| ||

= ^{1728}⁄_{231} US fl gal
| ||

≈ US fl gal 7.4805 | ||

= ^{7004737280000000000♠73728}⁄_{77} US fluid ounces
| ||

≈ US fl oz 957.51 | ||

≈ imperial gallons 6.2288 | ||

≈ imperial fluid ounces 996.61 | ||

≈ 56 US 0.803bushels | ||

≈ 11 oil 0.178barrel |

## Symbols and abbreviations[edit]

The IEEE symbol for the cubic foot is ft^{3}.^{[2]} The following abbreviations are used: cubic feet, cubic foot, cubic ft, cu feet, cu foot, cu ft, cu.ft, cuft, cb ft, cb.ft, cbft, cbf, feet^{3}, foot^{3}, ft^{3}, feet/-3, foot/-3, ft/-3.

Larger multiples are in common usage in commerce and industry in the USA:

- CCF
- HCF
- Centum, or hundred, cubic feet; i.e.,
^{3}. 100 ftLatin*centum*meaning*a hundred*. Used in the billing of natural gas and water delivered to households. - MCF
- Mille cubic feet; i.e.,
^{3}. 1000 ftLatin*mille*meaning*a thousand*. - MMCF
- Mille mille cubic feet; i.e., 000000 ft
^{3}. 1 - MMCFD
- MMCF per day; i.e., 000000 ft
^{3}/day. Used in the 1oil and gas industry. - BCF
- TMC
- Billion, or thousand million cubic feet; i.e., 000000000 ft
^{3}. TMC is usually used for referring to storage capacity and actual storage volume of storage dams. 1 - TCF
- Trillion cubic feet; i.e, 000000000000 ft
^{3}. Used in the oil and gas industry. 1

## Cubic foot per second[edit]

The IEEE symbol for the cubic foot per second is ft^{3}/s.^{[3]} The following abbreviations are used:

- cu ft/s
- ft
^{3}/sec - CFS
- cusec
^{[citation needed]}

## Cubic foot per minute[edit]

The IEEE symbol for the cubic foot per minute is ft^{3}/min.^{[4]} The following abbreviations are used:

- CFPM
- CFM

Cubic feet per minute is used to measure the amount of air that's being delivered and is a common metric used for pneumatic tools and air compressor systems.^{[5]}

## Standard cubic foot[edit]

A standard cubic foot (abbreviated **scf**) is a measure of quantity of gas, sometimes^{[clarification needed]} defined in terms of standard temperature and pressure as a cubic foot of volume at 60 degrees Fahrenheit (15.56 °C; 288.71 K) and 14.7 pounds per square inch (PSI) (1.01 bar; 101.35 kPa) of pressure.^{[citation needed]}

* See Also:* Standard cubic foot per minute

## See also[edit]

- cubic inch
- cubic yard
- Board foot
- Conversion of units
- Cord
- Cube (arithmetic), cube root
- Orders of magnitude (volume) for a comparison with other volumes
- Square foot
- Therm, a unit of natural gas approximately equal to 100 cubic feet