In electrical and electronic engineering, a current clamp, also known as current probe, is an electrical device with jaws which open to allow clamping around an electrical conductor. This allows measu
Clamp meter
A multimeter with built-in clamp. Pushing the large button at the bottom opens the lower jaw of the clamp, allowing the clamp to be placed around a conductor.
Columbia iron vane type clamp-on ammeter, with heads for different ranges
Electromagnetic compatibility is the ability of electrical equipment and systems to function acceptably in their electromagnetic environment, by limiting generation, propagation and reception of elect
Current clamp
…forms the primary winding and the coil forms the secondary. This type may also be used in reverse, to inject current into the conductor, for example in electromagnetic compatibility susceptibility testing to induce an interference current. Usually, the injection probe is specifically designed for this purpose. In this mode, the…
Anechoic RF chamber used for EMC testing (radiated emissions and immunity). The furniture has to be made of wood or plastic, not metal.
Log-periodic antenna measurement for outdoors
A TV tuner card showing many small bypass capacitors and three metal shields: the PCI bracket, the metal box with two coax inputs, and the shield for the S-Video connector
Spread spectrum method reduces EMC peaks. Frequency spectrum of the heating up period of a switching power supply which uses the spread spectrum method incl. waterfall diagram over a few minutes.