Per capita income
Per capita income or average income measures the average income earned per person in a given area in a specified year. It is calculated by dividing the area's total income by its total population. Per capita income is national income divided by population size. Per capita income is used to measure an area's average income and compare the wealth of different populations. Per capita income is used to measure a country's standard of living, it is expressed in terms of a used international currency such as the euro or United States dollar, is useful because it is known, is calculable from available gross domestic product and population estimates, produces a useful statistic for comparison of wealth between sovereign territories. This helps to ascertain a country's development status, it is one of the three measures for calculating the Human Development Index of a country. In the United States, it is defined by the U. S. Census Bureau as the following: "Per capita income is the mean money income received in the past 12 months computed for every man and child in a geographic area."
Critics claim that per capita income has several weaknesses in measuring prosperity: Comparisons of per capita income over time need to consider inflation. Without adjusting for inflation, figures tend to overstate the effects of economic growth. International comparisons can be distorted by cost of living differences not reflected in exchange rates. Where the objective is to compare living standards between countries, adjusting for differences in purchasing power parity will more reflect what people are able to buy with their money, it does not reflect income distribution. If a country's income distribution is skewed, a small wealthy class can increase per capita income while the majority of the population has no change in income. In this respect, median income is more useful when measuring of prosperity than per capita income, as it is less influenced by outliers. Non-monetary activity, such as barter or services provided within the family, is not counted; the importance of these services varies among economies.
Per capita income does not consider whether income is invested in factors to improve the area's development, such as health, education, or infrastructure. List of countries by average wage List of countries by GDP per capita—GDP at market or government official exchange rates per inhabitant List of countries by GDP per capita—GDP calculated at purchasing power parity exchange per inhabitant List of countries by GNI per capita List of countries by GNI per capita List of countries by income equality Total personal income
Marriage
Marriage called matrimony or wedlock, is a or ritually recognised union between spouses that establishes rights and obligations between those spouses, as well as between them and any resulting biological or adopted children and affinity. The definition of marriage varies around the world not only between cultures and between religions, but throughout the history of any given culture and religion, evolving to both expand and constrict in who and what is encompassed, but it is principally an institution in which interpersonal relationships sexual, are acknowledged or sanctioned. In some cultures, marriage is recommended or considered to be compulsory before pursuing any sexual activity; when defined broadly, marriage is considered a cultural universal. A marriage ceremony is known as a wedding. Individuals may marry for several reasons, including legal, libidinal, financial and religious purposes. Whom they marry may be influenced by gender determined rules of incest, prescriptive marriage rules, parental choice and individual desire.
In some areas of the world, arranged marriage, child marriage and sometimes forced marriage, may be practiced as a cultural tradition. Conversely, such practices may be outlawed and penalized in parts of the world out of concerns of the infringement of women's rights, or the infringement of children's rights, because of international law. Around the world in developed democracies, there has been a general trend towards ensuring equal rights within marriage for women and recognizing the marriages of interfaith and same-sex couples; these trends coincide with the broader human rights movement. Marriage can be recognized by a state, an organization, a religious authority, a tribal group, a local community, or peers, it is viewed as a contract. When a marriage is performed and carried out by a government institution in accordance with the marriage laws of the jurisdiction, without religious content, it is a civil marriage. Civil marriage recognizes and creates the rights and obligations intrinsic to matrimony before the state.
When a marriage is performed with religious content under the auspices of a religious institution it is a religious marriage. Religious marriage recognizes and creates the rights and obligations intrinsic to matrimony before that religion. Religious marriage is known variously as sacramental marriage in Catholicism, nikah in Islam, nissuin in Judaism, various other names in other faith traditions, each with their own constraints as to what constitutes, who can enter into, a valid religious marriage; some countries do not recognize locally performed religious marriage on its own, require a separate civil marriage for official purposes. Conversely, civil marriage does not exist in some countries governed by a religious legal system, such as Saudi Arabia, where marriages contracted abroad might not be recognized if they were contracted contrary to Saudi interpretations of Islamic religious law. In countries governed by a mixed secular-religious legal system, such as in Lebanon and Israel, locally performed civil marriage does not exist within the country, preventing interfaith and various other marriages contradicting religious laws from being entered into in the country, civil marriages performed abroad are recognized by the state if they conflict with religious laws.
The act of marriage creates normative or legal obligations between the individuals involved, any offspring they may produce or adopt. In terms of legal recognition, most sovereign states and other jurisdictions limit marriage to opposite-sex couples and a diminishing number of these permit polygyny, child marriages, forced marriages. In modern times, a growing number of countries developed democracies, have lifted bans on and have established legal recognition for the marriages of interfaith and same-sex couples; some cultures allow the dissolution of marriage through annulment. In some areas, child marriages and polygamy may occur in spite of national laws against the practice. Since the late twentieth century, major social changes in Western countries have led to changes in the demographics of marriage, with the age of first marriage increasing, fewer people marrying, more couples choosing to cohabit rather than marry. For example, the number of marriages in Europe decreased by 30% from 1975 to 2005.
In most cultures, married women had few rights of their own, being considered, along with the family's children, the property of the husband. In Europe, the United States, other places in the developed world, beginning in the late 19th century and lasting through the 21st century, marriage has undergone gradual legal changes, aimed at improving the rights of the wife; these changes included giving wives legal identities of their own, abolishing the right of husbands to physically discipline their wives, giving wives property rights, liberalizing divorce laws, providing wives with reproductive rights of their own, requiring a wife's consent when sexual relations occur. These changes have occurred in Western countries. In the 21st century, there continue to be controversies regarding the legal status of married women, legal acceptance of or leniency towards violence within marriage, traditional marriage customs such as dowry and bride price, for
New York City
The City of New York called either New York City or New York, is the most populous city in the United States. With an estimated 2017 population of 8,622,698 distributed over a land area of about 302.6 square miles, New York is the most densely populated major city in the United States. Located at the southern tip of the state of New York, the city is the center of the New York metropolitan area, the largest metropolitan area in the world by urban landmass and one of the world's most populous megacities, with an estimated 20,320,876 people in its 2017 Metropolitan Statistical Area and 23,876,155 residents in its Combined Statistical Area. A global power city, New York City has been described as the cultural and media capital of the world, exerts a significant impact upon commerce, research, education, tourism, art and sports; the city's fast pace has inspired the term New York minute. Home to the headquarters of the United Nations, New York is an important center for international diplomacy.
Situated on one of the world's largest natural harbors, New York City consists of five boroughs, each of, a separate county of the State of New York. The five boroughs – Brooklyn, Manhattan, The Bronx, Staten Island – were consolidated into a single city in 1898; the city and its metropolitan area constitute the premier gateway for legal immigration to the United States. As many as 800 languages are spoken in New York, making it the most linguistically diverse city in the world. New York City is home to more than 3.2 million residents born outside the United States, the largest foreign-born population of any city in the world. In 2017, the New York metropolitan area produced a gross metropolitan product of US$1.73 trillion. If greater New York City were a sovereign state, it would have the 12th highest GDP in the world. New York is home to the highest number of billionaires of any city in the world. New York City traces its origins to a trading post founded by colonists from the Dutch Republic in 1624 on Lower Manhattan.
The city and its surroundings came under English control in 1664 and were renamed New York after King Charles II of England granted the lands to his brother, the Duke of York. New York served as the capital of the United States from 1785 until 1790, it has been the country's largest city since 1790. The Statue of Liberty greeted millions of immigrants as they came to the U. S. by ship in the late 19th and early 20th centuries and is an international symbol of the U. S. and its ideals of liberty and peace. In the 21st century, New York has emerged as a global node of creativity and entrepreneurship, social tolerance, environmental sustainability, as a symbol of freedom and cultural diversity. Many districts and landmarks in New York City are well known, with the city having three of the world's ten most visited tourist attractions in 2013 and receiving a record 62.8 million tourists in 2017. Several sources have ranked New York the most photographed city in the world. Times Square, iconic as the world's "heart" and its "Crossroads", is the brightly illuminated hub of the Broadway Theater District, one of the world's busiest pedestrian intersections, a major center of the world's entertainment industry.
The names of many of the city's landmarks and parks are known around the world. Manhattan's real estate market is among the most expensive in the world. New York is home to the largest ethnic Chinese population outside of Asia, with multiple signature Chinatowns developing across the city. Providing continuous 24/7 service, the New York City Subway is the largest single-operator rapid transit system worldwide, with 472 rail stations. Over 120 colleges and universities are located in New York City, including Columbia University, New York University, Rockefeller University, which have been ranked among the top universities in the world. Anchored by Wall Street in the Financial District of Lower Manhattan, New York has been called both the most economically powerful city and the leading financial center of the world, the city is home to the world's two largest stock exchanges by total market capitalization, the New York Stock Exchange and NASDAQ. In 1664, the city was named in honor of the Duke of York.
James's older brother, King Charles II, had appointed the Duke proprietor of the former territory of New Netherland, including the city of New Amsterdam, which England had seized from the Dutch. During the Wisconsinan glaciation, 75,000 to 11,000 years ago, the New York City region was situated at the edge of a large ice sheet over 1,000 feet in depth; the erosive forward movement of the ice contributed to the separation of what is now Long Island and Staten Island. That action left bedrock at a shallow depth, providing a solid foundation for most of Manhattan's skyscrapers. In the precolonial era, the area of present-day New York City was inhabited by Algonquian Native Americans, including the Lenape, whose homeland, known as Lenapehoking, included Staten Island; the first documented visit into New York Harbor by a European was in 1524 by Giovanni da Verrazzano, a Florentine explorer in the service of the French crown. He named it Nouvelle Angoulême. A Spanish expedition led by captain Estêvão Gomes, a Portuguese sailing for Emperor Charles V, arrived in New York Harbor in January 1525 and charted the mouth of the Hudson River, which he named Río de San Antonio.
The Padrón Rea
Population density
Population density is a measurement of population per unit area or unit volume. It is applied to living organisms, most of the time to humans, it is a key geographical term. In simple terms population density refers to the number of people living in an area per kilometer square. Population density is population divided by total land water volume, as appropriate. Low densities may lead to further reduced fertility; this is called the Allee effect after the scientist. Examples of the causes in low population densities include: Increased problems with locating sexual mates Increased inbreeding For humans, population density is the number of people per unit of area quoted per square kilometer or square mile; this may be calculated for a county, country, another territory or the entire world. The world's population is around 7,500,000,000 and Earth's total area is 510,000,000 square kilometers. Therefore, the worldwide human population density is around 7,500,000,000 ÷ 510,000,000 = 14.7 per km2. If only the Earth's land area of 150,000,000 km2 is taken into account human population density is 50 per km2.
This includes all continental and island land area, including Antarctica. If Antarctica is excluded population density rises to over 55 people per km2. However, over half of the Earth's land mass consists of areas inhospitable to human habitation, such as deserts and high mountains, population tends to cluster around seaports and fresh-water sources. Thus, this number by itself does not give any helpful measurement of human population density. Several of the most densely populated territories in the world are city-states and dependencies; these territories have a small area and a high urbanization level, with an economically specialized city population drawing on rural resources outside the area, illustrating the difference between high population density and overpopulation The potential to maintain the agricultural aspects of deserts is limited as there is not enough precipitation to support a sustainable land. The population in these areas are low. Therefore, cities in the Middle East, such as Dubai, have been increasing in population and infrastructure growth at a fast pace.
Cities with high population densities are, by some, considered to be overpopulated, though this will depend on factors like quality of housing and infrastructure and access to resources. Most of the most densely populated cities are in Southeast Asia, though Cairo and Lagos in Africa fall into this category. City population and area are, however dependent on the definition of "urban area" used: densities are invariably higher for the central city area than when suburban settlements and the intervening rural areas are included, as in the areas of agglomeration or metropolitan area, the latter sometimes including neighboring cities. For instance, Milwaukee has a greater population density when just the inner city is measured, the surrounding suburbs excluded. In comparison, based on a world population of seven billion, the world's inhabitants, as a loose crowd taking up ten square feet per person, would occupy a space a little larger than Delaware's land area; the Gaza Strip has a population density of 5,046 pop/km.
Although arithmetic density is the most common way of measuring population density, several other methods have been developed to provide a more accurate measure of population density over a specific area. Arithmetic density: The total number of people / area of land Physiological density: The total population / area of arable land Agricultural density: The total rural population / area of arable land Residential density: The number of people living in an urban area / area of residential land Urban density: The number of people inhabiting an urban area / total area of urban land Ecological optimum: The density of population that can be supported by the natural resources Demography Human geography Idealized population Optimum population Population genetics Population health Population momentum Population pyramid Rural transport problem Small population size Distance sampling List of population concern organizations List of countries by population density List of cities by population density List of city districts by population density List of English districts by population density List of European cities proper by population density List of United States cities by population density List of islands by population density List of U.
S. states by population density List of Australian suburbs by population density Selected Current and Historic City, Ward & Neighborhood Density Duncan Smith / UCL Centre for Advanced Spatial Analysis. "World Population Density". Exploratory map shows data from the Global Human Settlement Layer produced by the European Commission JRC and the CIESIN Columbia University
Flatiron Building
The Flatiron Building the Fuller Building, is a triangular 22-story, 285-foot tall steel-framed landmarked building located at 175 Fifth Avenue in the Flatiron District neighborhood of borough of Manhattan, New York City. Upon completion in 1902, it was one of the tallest buildings in the city at 20 floors high and one of only two "skyscrapers" north of 14th Street – the other being the Metropolitan Life Insurance Company Tower, one block east; the building sits on a triangular block formed by Fifth Avenue and East 22nd Street – where the building's 87-foot back end is located – with East 23rd Street grazing the triangle's northern peak. As with numerous other wedge-shaped buildings, the name "Flatiron" derives from its resemblance to a cast-iron clothes iron; the building, called "one of the world's most iconic skyscrapers and a quintessential symbol of New York City", anchors the south end of Madison Square and the north end of the Ladies' Mile Historic District. The neighborhood around it is called the Flatiron District after its signature building, which has become an icon of New York City.
The Flatiron Building was designated a New York City landmark in 1966, was added to the National Register of Historic Places in 1979, was designated a National Historic Landmark in 1989. The site on which the Flatiron Building would stand was bought in 1857 by Amos Eno, who shortly built the Fifth Avenue Hotel on a site diagonally across from it. Eno tore down the four-story St. Germaine Hotel on the south end of the lot, replaced it with a seven-story apartment building, the Cumberland. On the remainder of the lot he built four three-story buildings for commercial use; this left four stories of the Cumberland's northern face exposed, which Eno rented out to advertisers, including The New York Times, who installed a sign made up of electric lights. Eno put a canvas screen on the wall, projected images onto it from a magic lantern on top of one of his smaller buildings, presenting advertisements and interesting pictures alternately. Both the Times and the New York Tribune began using the screen for news bulletins, on election nights tens of thousands of people would gather in Madison Square, waiting for the latest results.
During his life Eno resisted suggestions to sell "Eno's flatiron", as the site had become known, but after his death in 1899 his assets were liquidated, the lot went up for sale. The New York State Assembly appropriated $3 million for the city to buy it, but this fell through when a newspaper reporter discovered that the plan was a graft scheme by Tammany Hall boss Richard Croker. Instead, the lot was bought at auction by William Eno, one of Amos's sons, for $690,000 – the elder Eno had bought the property for around $30,000 forty years earlier. Three weeks William re-sold the lot to Samuel and Mott Newhouse for $801,000; the Newhouses intended to put up a 12-story building with street-level retail shops and bachelor apartments above, but two years they sold the lot for about $2 million to Cumberland Realty Company, an investment partnership created by Harry S. Black, CEO of the Fuller Company; the Fuller Company was the first true general contractor that dealt with all aspects of building construction except design, they specialized in building skyscrapers.
Black intended to construct a new headquarters building on the site, despite the recent deterioration of the surrounding neighborhood, he engaged Chicago architect Daniel Burnham to design it. The building, which would be Burnham's first in New York City, would be the first skyscraper north of 14th Street, it was to be named the Fuller Building after George A. Fuller, founder of the Fuller Company and "father of the skyscraper", who had died two years earlier, but locals persisted in calling it "The Flatiron", a name which has since been made official; the Flatiron Building was designed by Chicago's Daniel Burnham as a vertical Renaissance palazzo with Beaux-Arts styling. Unlike New York's early skyscrapers, which took the form of towers arising from a lower, blockier mass, such as the contemporary Singer Building, the Flatiron Building epitomizes the Chicago school conception: like a classical Greek column, its facade – limestone at the bottom changing to glazed terra-cotta from the Atlantic Terra Cotta Company in Tottenville, Staten Island as the floors rise – is divided into a base and capital.
Early sketches by Daniel Burnham show a design with an clockface and a far more elaborate crown than in the actual building. Though Burnham maintained overall control of the design process, he was not directly connected with the details of the structure as built. Working drawings for the Flatiron Building, remain to be located, though renderings were published at the time of construction in American Architect and Architectural Record. Building the Flatiron was made feasible by a change to New York City's building codes in 1892, which eliminated the requirement that masonry be used for fireproofing considerations; this opened the way for steel-skeleton construction. Since it employed a steel skeleton – it could be built to 22 stories easily, which would have been difficult using other construction methods of that time, it was a technique familiar to the Fuller Company, a contracting firm with considerable expertise in building such tall structures. At the vertex, the triangular tower is only 6.5 feet wide.
Census
A census is the procedure of systematically acquiring and recording information about the members of a given population. The term is used in connection with national population and housing censuses; the United Nations defines the essential features of population and housing censuses as "individual enumeration, universality within a defined territory and defined periodicity", recommends that population censuses be taken at least every 10 years. United Nations recommendations cover census topics to be collected, official definitions and other useful information to co-ordinate international practice; the word is of Latin origin: during the Roman Republic, the census was a list that kept track of all adult males fit for military service. The modern census is essential to international comparisons of any kind of statistics, censuses collect data on many attributes of a population, not just how many people there are. Censuses began as the only method of collecting national demographic data, are now part of a larger system of different surveys.
Although population estimates remain an important function of a census, including the geographic distribution of the population, statistics can be produced about combinations of attributes e.g. education by age and sex in different regions. Current administrative data systems allow for other approaches to enumeration with the same level of detail but raise concerns about privacy and the possibility of biasing estimates. A census can be contrasted with sampling in which information is obtained only from a subset of a population. Modern census data are used for research, business marketing, planning, as a baseline for designing sample surveys by providing a sampling frame such as an address register. Census counts are necessary to adjust samples to be representative of a population by weighting them as is common in opinion polling. Stratification requires knowledge of the relative sizes of different population strata which can be derived from census enumerations. In some countries, the census provides the official counts used to apportion the number of elected representatives to regions.
In many cases, a chosen random sample can provide more accurate information than attempts to get a population census. A census is construed as the opposite of a sample as its intent is to count everyone in a population rather than a fraction. However, population censuses rely on a sampling frame to count the population; this is the only way to be sure that everyone has been included as otherwise those not responding would not be followed up on and individuals could be missed. The fundamental premise of a census is that the population is not known and a new estimate is to be made by the analysis of primary data; the use of a sampling frame is counterintuitive as it suggests that the population size is known. However, a census is used to collect attribute data on the individuals in the nation; this process of sampling marks the difference between historical census, a house to house process or the product of an imperial decree, the modern statistical project. The sampling frame used by census is always an address register.
Thus it is not known how many people there are in each household. Depending on the mode of enumeration, a form is sent to the householder, an enumerator calls, or administrative records for the dwelling are accessed; as a preliminary to the dispatch of forms, census workers will check any address problems on the ground. While it may seem straightforward to use the postal service file for this purpose, this can be out of date and some dwellings may contain a number of independent households. A particular problem is what are termed'communal establishments' which category includes student residences, religious orders, homes for the elderly, people in prisons etc; as these are not enumerated by a single householder, they are treated differently and visited by special teams of census workers to ensure they are classified appropriately. Individuals are counted within households and information is collected about the household structure and the housing. For this reason international documents refer to censuses of housing.
The census response is made by a household, indicating details of individuals resident there. An important aspect of census enumerations is determining which individuals can be counted from which cannot be counted. Broadly, three definitions can be used: de facto residence; this is important to consider individuals who have temporary addresses. Every person should be identified uniquely as resident in one place but where they happen to be on Census Day, their de facto residence, may not be the best place to count them. Where an individual uses services may be more useful and this is at their usual, or de jure, residence. An individual may be represented at a permanent address a family home for students or long term migrants, it is necessary to have a precise definition of residence to decide whether visitors to a country should be included in the population count. This is becoming more important as students travel abroad for education for a period of several years. Other groups causing problems of enumeration are new born babies, people away on holiday, people moving home around census day, people without a fixed address.
People having second homes because of working in another part of the country or retaining a holiday cottage are dif
ZIP Code
A ZIP Code is a postal code used by the United States Postal Service in a system it introduced in 1963. The term ZIP is an acronym for Zone Improvement Plan; the basic format consists of five digits. An extended ZIP+4 code was introduced in 1983 which includes the five digits of the ZIP Code, followed by a hyphen and four additional digits that reference a more specific location; the term ZIP Code was registered as a servicemark by the U. S. Postal Service, but its registration has since expired; the early history and context of postal codes began with postal district/zone numbers. The United States Post Office Department implemented postal zones for numerous large cities in 1943. For example: The "16" was the number of the postal zone in the specific city. By the early 1960s, a more organized system was needed, non-mandatory five-digit ZIP Codes were introduced nationwide on July 1, 1963; the USPOD issued its Publication 59: Abbreviations for Use with ZIP Code on October 1, 1963, with the list of two-letter state abbreviations which are written with both letters capitalized.
An earlier list in June had proposed capitalized abbreviations ranging from two to five letters. According to Publication 59, the two-letter standard was "based on a maximum 23-position line, because this has been found to be the most universally acceptable line capacity basis for major addressing systems", which would be exceeded by a long city name combined with a multi-letter state abbreviation, such as "Sacramento, Calif." along with the ZIP Code. The abbreviations have remained unchanged, with the exception of Nebraska, changed from NB to NE in 1969 at the request of the Canadian postal administration, to avoid confusion with the Canadian province of New Brunswick. Robert Moon is considered the father of the ZIP Code; the post office only credits Moon with the first three digits of the ZIP Code, which describe the sectional center facility or "sec center." An SCF is a central mail processing facility with those three digits. The fourth and fifth digits, which give a more precise locale within the SCF, were proposed by Henry Bentley Hahn Sr.
The SCF sorts mail to all post offices with those first three digits in their ZIP Codes. The mail is sorted according to the final two digits of the ZIP Code and sent to the corresponding post offices in the early morning. Sectional centers do not deliver mail and are not open to the public, most of their employees work the night shift. Mail picked up at post offices is sent to their own SCF in the afternoon, where the mail is sorted overnight. In the case of large cities, the last two digits coincide with the older postal zone number thus: In 1967, these became mandatory for second- and third-class bulk mailers, the system was soon adopted generally; the United States Post Office used a cartoon character, which it called Mr. ZIP, to promote the use of the ZIP Code, he was depicted with a legend such as "USE ZIP CODE" in the selvage of panes of postage stamps or on the covers of booklet panes of stamps. In 1971 Elmira Star-Gazette reporter Dick Baumbach found out the White House was not using a ZIP Code on its envelopes.
Herb Klein, special assistant to President Nixon, responded by saying the next printing of envelopes would include the ZIP Code. In 1983, the U. S. Postal Service introduced an expanded ZIP Code system that it called ZIP+4 called "plus-four codes", "add-on codes", or "add-ons". A ZIP+4 Code uses the basic five-digit code plus four additional digits to identify a geographic segment within the five-digit delivery area, such as a city block, a group of apartments, an individual high-volume receiver of mail, a post office box, or any other unit that could use an extra identifier to aid in efficient mail sorting and delivery. However, initial attempts to promote universal use of the new format met with public resistance and today the plus-four code is not required. In general, mail is read by a multiline optical character reader that instantly determines the correct ZIP+4 Code from the address—along with the more specific delivery point—and sprays an Intelligent Mail barcode on the face of the mail piece that corresponds to 11 digits—nine for the ZIP+4 Code and two for the delivery point.
For Post Office Boxes, the general rule is. The add-on code is one of the following: the last four digits of the box number, zero plus the last three digits of the box number, or, if the box number consists of fewer than four digits, enough zeros are attached to the front of the box number to produce a four-digit number. However, there is no uniform rule, so the ZIP+4 Code must be looked up individually for each box; the ZIP Code is translated into an Intelligent Mail barcode, printed on the mailpiece to make it easier for automated machines to sort. A barcode can be printed by the sender, it is better to let the post office put one on. In general, the post office uses OCR technology, though in some cases a human might have to read and enter the address. Customers who send bulk mail can get a discount on postage if they have printed the barcode themselves and have presorted the mai
United States
California
