1.
Auto racing
–
Auto racing is a sport involving the racing of automobiles for competition. Almost as soon as automobiles had been invented, races of various sorts were organised, by the 1930s specialist racing cars had developed. There are now numerous different categories, each with different rules and it was won by the carriage of Isaac Watt Boulton. Internal combustion auto racing events began soon after the construction of the first successful gasoline-fueled automobiles, the first organized contest was on April 28,1887, by the chief editor of Paris publication Le Vélocipède, Monsieur Fossier. It ran 2 kilometres from Neuilly Bridge to the Bois de Boulogne, on July 22,1894, the Parisian magazine Le Petit Journal organized what is considered to be the worlds first motoring competition, from Paris to Rouen. One hundred and two competitors paid a 10-franc entrance fee, the first American automobile race is generally held to be the Thanksgiving Day Chicago Times-Herald race of November 28,1895. Press coverage of the event first aroused significant American interest in the automobile, brooklands, in Surrey, was the first purpose-built motor racing venue, opening in June 1907. It featured a 4.43 km concrete track with high-speed banked corners, One of the oldest existing purpose-built automobile racing circuits in the United States, still in use, is the 2. 5-mile -long Indianapolis Motor Speedway in Speedway, Indiana. It is the largest capacity venue of any variety worldwide, with a top capacity of some 257. NASCAR was founded by Bill France, Sr. on February 21,1948, the first NASCAR Strictly Stock race ever was held on June 19,1949, at Daytona Beach, Florida. From 1962, sports cars temporarily took a seat to GT cars. From 1972 through 2003, NASCARs premier series was called the Winston Cup Series, the changes that resulted from RJRs involvement, as well as the reduction of the schedule from 48 to 31 races a year, established 1972 as the beginning of NASCARs modern era. The IMSA GT Series evolved into the American Le Mans Series, the European races eventually became the closely related Le Mans Series, both of which mix prototypes and GTs. The best-known variety of racing, Formula One, which hosts the famous Monaco Grand Prix. In single-seater, the wheels are not covered, and the cars often have aerofoil wings front, in Europe and Asia, open-wheeled racing is commonly referred to as Formula, with appropriate hierarchical suffixes. In North America, the Formula terminology is not followed, the sport is usually arranged to follow an international format, a regional format, and/or a domestic, or country-specific, format. In North America, the used in the National Championship have traditionally been similar though less sophisticated than F1 cars. The series most famous race is the Indianapolis 500, the other major international single-seater racing series is GP2
2.
Formula One
–
Formula One is the highest class of single-seat auto racing that is sanctioned by the Fédération Internationale de lAutomobile. The FIA Formula One World Championship has been the form of racing since the inaugural season in 1950. The formula, designated in the name, refers to a set of rules, the F1 season consists of a series of races, known as Grands Prix, held worldwide on purpose-built F1 circuits and public roads. The results of each race are evaluated using a system to determine two annual World Championships, one for drivers, one for constructors. The racing drivers are required to be holders of valid Super Licences, the races are required to be held on tracks graded 1, the highest grade a track can receive by the FIA. Most events are held in locations on purpose-built tracks, but there are several events in city centres throughout the world. Formula One cars are the fastest road racing cars in the world. Formula One cars race at speeds of up to approximately 375 km/h with engines currently limited in performance to a maximum of 15,000 RPM, the cars are capable of lateral acceleration in excess of five g in corners. The performance of the cars is very dependent on electronics – although traction control and other driving aids have been banned since 2008 – and on aerodynamics, suspension, the formula has radically evolved and changed through the history of the sport. F1 had a global television audience of 425 million people during the course of the 2014 season. Grand Prix racing began in 1906 and became the most popular internationally in the second half of the twentieth century. The Formula One Group is the holder of the commercial rights. Its high profile and popularity have created a major merchandising environment, since 2000 the sports spiraling expenditures and the distribution of prize money favoring established top teams have forced complaints from smaller teams and led several teams to bankruptcy. On 23 January 2017 it was confirmed that Liberty Media had completed its $8 billion acquisition of Delta Topco, the Formula One series originated with the European Grand Prix Motor Racing of the 1920s and 1930s. The formula is a set of rules that all cars must meet. Formula One was a new formula agreed upon after World War II during 1946, the first world championship race was held at Silverstone, United Kingdom in 1950. A championship for constructors followed in 1958, national championships existed in South Africa and the UK in the 1960s and 1970s. Non-championship Formula One events were held for years, but due to the increasing cost of competition
3.
Maserati
–
Maserati is an Italian luxury vehicle manufacturer established on 1 December 1914, in Bologna. The companys headquarters are now in Modena, and its emblem is a trident and it has been owned by the Italian-American car giant Fiat Chrysler Automobiles and FCAs Italian predecessor Fiat S. p. A. since 1993. In May 2014, due to plans and product launches. This caused them to production of the Quattroporte and Ghibli models. Maserati is placing a production output cap at 75,000 vehicles globally, the Maserati brothers, Alfieri, Bindo, Carlo, Ettore, and Ernesto were all involved with automobiles from the beginning of the 20th century. Alfieri, Bindo and Ernesto built 2-litre Grand Prix cars for Diatto, in 1926, Diatto suspended the production of race cars, leading to the creation of the first Maserati and the founding of the Maserati marque. One of the first Maseratis, driven by Alfieri, won the 1926 Targa Florio, Maserati began making race cars with 4,6,8 and 16 cylinders. The trident logo of the Maserati car company is based on the Fountain of Neptune in Bolognas Piazza Maggiore, in 1920, one of the Maserati brothers, artist Mario, used this symbol in the logo at the suggestion of family friend Marquis Diego de Sterlich. Alfieri Maserati died in 1932, but three brothers, Bindo, Ernesto and Ettore, kept the firm going, building cars that won races. The brothers continued in engineering roles with the company, Racing successes continued, even against the giants of German racing, Auto Union and Mercedes. In back-to-back wins in 1939 and 1940, a Maserati 8CTF won the Indianapolis 500, the war then intervened, Maserati abandoned car making to produce components for the Italian war effort. During this time, Maserati worked in fierce competition to construct a V16 town car for Benito Mussolini before Ferry Porsche of Volkswagen built one for Adolf Hitler and this failed, and the plans were scrapped. Once peace was restored, Maserati returned to making cars, the Maserati A6 series did well in the racing scene. Key people joined the Maserati team, alberto Massimino, an old Fiat engineer, with both Alfa Romeo and Ferrari experiences oversaw the design of all racing models for the next ten years. With him joined engineers Giulio Alfieri, Vittorio Bellentani, and Gioacchino Colombo, the focus was on the best engines and chassis to succeed in car racing. These new projects saw the last contributions of the Maserati brothers and this new team at Maserati worked on several projects, the 4CLT, the A6 series, the 8CLT, and, pivotally for the future success of the company, the A6GCS. Other racing projects in the 1950s were the 200S, 300S, 350S, Maserati retired from factory racing participation because of the Guidizzolo tragedy during the 1957 Mille Miglia, though they continued to build cars for privateers. Maserati became more and more focused on building road-going grand tourers, the 1957 Maserati 3500 GT marked a turning point in the marques history, as its first ground-up grand tourer design and first series produced car
4.
Automotive design
–
Automotive design is the profession involved in the development of the appearance, and to some extent the ergonomics, of motor vehicles or more specifically road vehicles. This most commonly refers to automobiles but also refers to motorcycles, trucks, buses, coaches, the functional design and development of a modern motor vehicle is typically done by a large team from many different disciplines included within automotive engineering. Automotive design in context is primarily concerned with developing the visual appearance or aesthetics of the vehicle. Automotive design is practiced by designers who usually have an art background, the task of the design team is usually split into three main aspects, exterior design, interior design, and color and trim design. Graphic design is also an aspect of design, this is generally shared amongst the design team as the lead designer sees fit. Design focuses not only on the outer shape of automobile parts. The aesthetic value will need to correspond to ergonomic functionality and utility features as well, though not all the new vehicular gadgets are to be designated as factory standard items, some of them may be integral to determining the future course of any specific vehicular models. The stylist responsible for the design of the exterior of the vehicle develops the proportions, shape, Exterior design is first done by a series of digital or manual drawings. Progressively, drawings that are more detailed are executed and approved by appropriate layers of management, Clay and or digital models are developed from, and along with the drawings. The data from these models are used to create a full sized mock-up of the final design. With three- and five-axis CNC milling machines, the model is first designed in a computer program and then carved using the machine. Even in times of high-class 3d software and virtual models on power walls, here the emphasis is on ergonomics and the comfort of the passengers. The procedure here is the same as with exterior design, the color and trim designer is responsible for the research, design, and development of all interior and exterior colors and materials used on a vehicle. These include paints, plastics, fabric designs, leather, grains, carpet, headliner, wood trim, Color, contrast, texture, and pattern must be carefully combined to give the vehicle a unique interior environment experience. Designers work closely with the exterior and interior designers, designers draw inspiration from other design disciplines such as, industrial design, fashion, home furnishing, architecture, and sometimes product design. Specific research is done into global trends to design for two to three model years in the future. Trend boards are created from research in order to keep track of design influences as they relate to the automotive industry. The designer then uses this information to develop themes and concepts that are further refined and tested on the vehicle models
5.
Leaf spring
–
A leaf spring is a simple form of spring commonly used for the suspension in wheeled vehicles. Originally called a laminated or carriage spring, and sometimes referred to as a spring or cart spring. A leaf spring takes the form of a slender arc-shaped length of spring steel of rectangular cross-section, in the most common configuration, the center of the arc provides location for the axle, while tie holes are provided at either end for attaching to the vehicle body. For very heavy vehicles, a spring can be made from several leaves stacked on top of each other in several layers. Leaf springs can serve locating and to some extent damping as well as springing functions, while the interleaf friction provides a damping action, it is not well controlled and results in stiction in the motion of the suspension. For this reason some manufacturers have used mono-leaf springs, a leaf spring can either be attached directly to the frame at both ends or attached directly at one end, usually the front, with the other end attached through a shackle, a short swinging arm. The shackle takes up the tendency of the spring to elongate when compressed. Some springs terminated in an end, called a spoon end. There were a variety of springs, usually employing the word elliptical. Elliptical or full elliptical leaf springs referred to two circular arcs linked at their tips and this was joined to the frame at the top center of the upper arc, the bottom center was joined to the live suspension components, such as a solid front axle. Additional suspension components, such as trailing arms, would usually be needed for this design and that employed the lower arc, hence its name. As an example of leaf springs, the Ford Model T had multiple leaf springs over its differential that were curved in the shape of a yoke. As a substitute for dampers, some manufacturers laid non-metallic sheets in between the leaves, such as wood. Today leaf springs are used in heavy commercial vehicles such as vans and trucks, SUVs. For heavy vehicles, they have the advantage of spreading the load more widely over the vehicles chassis, whereas coil springs transfer it to a single point. Unlike coil springs, leaf springs also locate the axle, eliminating the need for trailing arms. A further advantage of a leaf spring over a spring is that the end of the leaf spring may be guided along a definite path. A more modern implementation is the leaf spring
6.
Internal combustion engine
–
An internal combustion engine is a heat engine where the combustion of a fuel occurs with an oxidizer in a combustion chamber that is an integral part of the working fluid flow circuit. In an internal combustion engine the expansion of the high-temperature and high-pressure gases produced by combustion applies direct force to some component of the engine, the force is applied typically to pistons, turbine blades, rotor or a nozzle. This force moves the component over a distance, transforming chemical energy into mechanical energy. The first commercially successful internal combustion engine was created by Étienne Lenoir around 1859, firearms are also a form of internal combustion engine. Working fluids can be air, hot water, pressurized water or even liquid sodium, ICEs are usually powered by energy-dense fuels such as gasoline or diesel, liquids derived from fossil fuels. While there are many applications, most ICEs are used in mobile applications and are the dominant power supply for vehicles such as cars, aircraft. Typically an ICE is fed with fossil fuels like natural gas or petroleum products such as gasoline, there is a growing usage of renewable fuels like biodiesel for compression ignition engines and bioethanol or methanol for spark ignition engines. Hydrogen is sometimes used, and can be made from fossil fuels or renewable energy. Various scientists and engineers contributed to the development of internal combustion engines, in 1791, John Barber developed a turbine. In 1794 Thomas Mead patented a gas engine, also in 1794 Robert Street patented an internal combustion engine, which was also the first to use liquid fuel, and built an engine around that time. In 1798, John Stevens built the first American internal combustion engine, in 1807, Swiss engineer François Isaac de Rivaz built an internal combustion engine ignited by electric spark. In 1823, Samuel Brown patented the first internal combustion engine to be applied industrially, in 1860, Belgian Jean Joseph Etienne Lenoir produced a gas-fired internal combustion engine. In 1864, Nikolaus Otto patented the first atmospheric gas engine, in 1872, American George Brayton invented the first commercial liquid-fuelled internal combustion engine. In 1876, Nikolaus Otto, working with Gottlieb Daimler and Wilhelm Maybach, patented the compressed charge, in 1879, Karl Benz patented a reliable two-stroke gas engine. In 1892, Rudolf Diesel developed the first compressed charge, compression ignition engine, in 1926, Robert Goddard launched the first liquid-fueled rocket. In 1939, the Heinkel He 178 became the worlds first jet aircraft, at one time, the word engine meant any piece of machinery — a sense that persists in expressions such as siege engine. A motor is any machine that produces mechanical power, traditionally, electric motors are not referred to as Engines, however, combustion engines are often referred to as motors. In boating an internal combustion engine that is installed in the hull is referred to as an engine, reciprocating piston engines are by far the most common power source for land and water vehicles, including automobiles, motorcycles, ships and to a lesser extent, locomotives
7.
Inline-four engine
–
The inline-four engine or straight-four engine is a type of inline internal combustion four-cylinder engine with all four cylinders mounted in a straight line, or plane along the crankcase. The single bank of cylinders may be oriented in either a vertical or a plane with all the pistons driving a common crankshaft. Where it is inclined, it is called a slant-four. In a specification chart or when an abbreviation is used, an engine is listed either as I4 or L4. The inline-four layout is in primary balance and confers a degree of mechanical simplicity which makes it popular for economy cars. However, despite its simplicity, it suffers from an imbalance which causes minor vibrations in smaller engines. These vibrations become more powerful as engine size and power increase, the inline-four is the most common engine configuration in modern cars, while the V6 engine is the second most popular. This inline engine configuration is the most common in cars with a displacement up to 3.0 L, in practice, the displacement of inline-four petrol engines in cars rarely exceeds this figure. For example, the largest engine of this form on the U. S. market in model year 2015 is the Toyota 2TR-FE, however, there are some notable exceptions. Early vehicles also tended to have engines with larger displacements to develop horsepower, the Model A Ford was built with a 3.3 L inline-four engine. Inline-four diesel engines, which are lower revving than gasoline engines, Mitsubishi still employs a 3.0 L inline-four diesel. Generally, European and Asian manufacturers of trucks with a vehicle weight rating between 7.5 and 18 tonnes use inline four-cylinder diesel engines with displacements around 5 L. The MAN D0834 engine is a 4.6 L inline-4 with 220 hp and 627 lb·ft, the Isuzu Forward is a medium-duty truck which is available with a 5.2 L inline-four engine that delivers 210 hp and 470 lb·ft. The Hino Ranger is a medium-duty truck which is available with a 5.1 L inline-four engine that delivers 175 hp and 465 lb·ft, the earlier Hino Ranger even had a 5.3 L inline-four engine. The Kubota M135X is a tractor with a 6.1 L inline-four and this turbo-diesel engine has a bore of 118 mm and a relatively long stroke of 140 mm. One of the strongest Powerboat-4-cylinders is the Volvo Penta D4-300 turbodiesel and this is a 3.7 L-inline-4 with 300 hp and 516 lb·ft. Brunswick Marine built a 127 kW3.7 L 4-cylinder gasoline engine for their Mercruiser Inboard/outboard line, the block was formed from one half of a Ford 460 cubic inch V8 engine. This engine was produced in the 1970s and 1980s, One of the largest inline-four engines is the MAN B&W 4K90 marine engine
8.
Supercharger
–
A supercharger is an air compressor that increases the pressure or density of air supplied to an internal combustion engine. This gives each intake cycle of the more oxygen, letting it burn more fuel and do more work. Power for the supercharger can be provided mechanically by means of a belt, gear, shaft, when power is provided by a turbine powered by exhaust gas, a supercharger is known as a turbosupercharger – typically referred to simply as a turbocharger or just turbo. Common usage restricts the term supercharger to mechanically driven units, in 1848 or 1849 G. Jones of Birmingham, England brought out a Roots-style compressor. The worlds first functional, actually tested engine supercharger was made by Dugald Clerk, gottlieb Daimler received a German patent for supercharging an internal combustion engine in 1885. Louis Renault patented a centrifugal supercharger in France in 1902, an early supercharged race car was built by Lee Chadwick of Pottstown, Pennsylvania in 1908 which reportedly reached a speed of 100 mph. The worlds first series-produced cars with superchargers were Mercedes 6/25/40 hp, both models were introduced in 1921 and had Roots superchargers. They were distinguished as Kompressor models, the origin of the Mercedes-Benz badging which continues today, on March 24,1878 Heinrich Krigar of Germany obtained patent #4121, patenting the first ever screw-type compressor. Later that same year on August 16 he obtained patent #7116 after modifying and improving his original designs and his designs show a two-lobe rotor assembly with each rotor having the same shape as the other. Although the design resembled the Roots style compressor, the screws were clearly shown with 180 degrees of twist along their length, unfortunately, the technology of the time was not sufficient to produce such a unit, and Heinrich made no further progress with the screw compressor. Nearly half a century later, in 1935, Alf Lysholm and he also patented the method for machining the compressor rotors. There are two types of superchargers defined according to the method of gas transfer, positive displacement. Positive displacement blowers and compressors deliver an almost constant level of pressure increase at all engine speeds, dynamic compressors do not deliver pressure at low speeds, above a threshold speed, pressure increases with engine speed. Positive-displacement pumps deliver a nearly fixed volume of air per revolution at all speeds, Roots superchargers are external compression only. External compression refers to pumps that transfer air at ambient pressure into the engine, if the engine is running under boost conditions, the pressure in the intake manifold is higher than that coming from the supercharger. That causes a backflow from the engine into the supercharger until the two reach equilibrium and it is the backflow that actually compresses the incoming gas. This is an inefficient process and the factor in the lack of efficiency of Roots superchargers when used at high boost levels. The lower the boost level the smaller is this loss, and Roots blowers are very efficient at moving air at low pressure differentials, all the other types have some degree of internal compression
9.
Manual transmission
–
A manual transmission, also known as a manual gearbox, stick shift, n-speed manual, standard, MT, or in colloquial U. S. English, a stick, is a type of transmission used in motor vehicle applications. The number of gear ratios is often expressed for automatic transmissions as well. Manual transmissions often feature a clutch and a movable gear stick. This type of transmission is called a sequential manual transmission. In a manual transmission, the flywheel is attached to the engines crankshaft, the clutch disk is in between the pressure plate and the flywheel, and is held against the flywheel under pressure from the pressure plate. When the engine is running and the clutch is engaged, the flywheel spins the clutch plate, as the clutch pedal is depressed, the throw out bearing is activated, which causes the pressure plate to stop applying pressure to the clutch disk. This makes the clutch plate stop receiving power from the engine, when the clutch pedal is released, the throw out bearing is deactivated, and the clutch disk is again held against the flywheel, allowing it to start receiving power from the engine. Manual transmissions are characterized by gear ratios that are selectable by locking selected gear pairs to the shaft inside the transmission. Conversely, most automatic transmissions feature epicyclic gearing controlled by brake bands and/or clutch packs to select gear ratio, automatic transmissions that allow the driver to manually select the current gear are called manumatics. A manual-style transmission operated by computer is called an automated transmission rather than an automatic. Operating aforementioned transmissions often use the pattern of shifter movement with a single or multiple switches to engage the next sequence of gear selection. The earliest form of a transmission is thought to have been invented by Louis-René Panhard. This type of transmission offered multiple gear ratios and, in most cases and these transmissions are called sliding mesh transmissions or sometimes crash boxes, because of the difficulty in changing gears and the loud grinding sound that often accompanied. Newer manual transmissions on cars have all gears mesh at all times and are referred to as constant-mesh transmissions, in both types, a particular gear combination can only be engaged when the two parts to engage are at the same speed. To shift to a gear, the transmission is put in neutral. The vehicle also slows while in neutral and that slows other transmission parts, so the time in neutral depends on the grade, wind, for both upshifts and downshifts, the clutch is released while in neutral. Some drivers use the only for starting from a stop. Even though automobile and light truck transmissions are now almost universally synchronized, transmissions for trucks and machinery, motorcycles
10.
Tire
–
A tire or tyre is a ring-shaped vehicle component that covers the wheels rim to protect it and enable better vehicle performance. Most tires, such as those for automobiles and bicycles, provide traction between the vehicle and the road providing a flexible cushion that absorbs shock. The materials of modern tires are synthetic rubber, natural rubber, fabric and wire, along with carbon black. They consist of a tread and a body, the tread provides traction while the body provides containment for a quantity of compressed air. Before rubber was developed, the first versions of tires were bands of metal fitted around wooden wheels to prevent wear and tear. Pneumatic tires are used on many types of vehicles, including cars, bicycles, motorcycles, buses, trucks, heavy equipment, and aircraft. Metal tires are used on locomotives and railcars, and solid rubber tires are still used in various non-automotive applications, such as some casters, carts, lawnmowers. The etymology of tire is that the word is a form of attire. The spelling tyre does not appear until the 1840s when the English began shrink fitting railway car wheels with malleable iron, nevertheless, traditional publishers continued using tire. The Times newspaper in Britain was still using tire as late as 1905, the spelling tyre began to be commonly used in the 19th century for pneumatic tires in the UK. However, over the course of the 20th century, tyre became established as the standard British spelling, the earliest tires were bands of leather, then iron, placed on wooden wheels, used on carts and wagons. The tire would be heated in a fire, placed over the wheel and quenched, causing the metal to contract. A skilled worker, known as a wheelwright, carried out this work, the outer ring served to tie the wheel segments together for use, providing also a wear-resistant surface to the perimeter of the wheel. The word tire thus emerged as a variant spelling to refer to the bands used to tie wheels. The first patent for what appears to be a standard pneumatic tire appeared in 1847 lodged by the Scottish inventor Robert William Thomson, however, this never went into production. The first practical pneumatic tire was made in 1888 on May Street, Belfast, by Scots-born John Boyd Dunlop and it was an effort to prevent the headaches of his 10-year-old son Johnnie, while riding his tricycle on rough pavements. His doctor, John, later Sir John Fagan, had prescribed cycling as an exercise for the boy, Fagan participated in designing the first pneumatic tires. In Dunlops tire patent specification dated 31 October 1888, his interest is only in its use in cycles, in September 1890, he was made aware of an earlier development but the company kept the information to itself
11.
United Kingdom
–
The United Kingdom of Great Britain and Northern Ireland, commonly known as the United Kingdom or Britain, is a sovereign country in western Europe. Lying off the north-western coast of the European mainland, the United Kingdom includes the island of Great Britain, Northern Ireland is the only part of the United Kingdom that shares a land border with another sovereign state—the Republic of Ireland. The Irish Sea lies between Great Britain and Ireland, with an area of 242,500 square kilometres, the United Kingdom is the 78th-largest sovereign state in the world and the 11th-largest in Europe. It is also the 21st-most populous country, with an estimated 65.1 million inhabitants, together, this makes it the fourth-most densely populated country in the European Union. The United Kingdom is a monarchy with a parliamentary system of governance. The monarch is Queen Elizabeth II, who has reigned since 6 February 1952, other major urban areas in the United Kingdom include the regions of Birmingham, Leeds, Glasgow, Liverpool and Manchester. The United Kingdom consists of four countries—England, Scotland, Wales, the last three have devolved administrations, each with varying powers, based in their capitals, Edinburgh, Cardiff and Belfast, respectively. The relationships among the countries of the UK have changed over time, Wales was annexed by the Kingdom of England under the Laws in Wales Acts 1535 and 1542. A treaty between England and Scotland resulted in 1707 in a unified Kingdom of Great Britain, which merged in 1801 with the Kingdom of Ireland to form the United Kingdom of Great Britain and Ireland. Five-sixths of Ireland seceded from the UK in 1922, leaving the present formulation of the United Kingdom of Great Britain, there are fourteen British Overseas Territories. These are the remnants of the British Empire which, at its height in the 1920s, British influence can be observed in the language, culture and legal systems of many of its former colonies. The United Kingdom is a country and has the worlds fifth-largest economy by nominal GDP. The UK is considered to have an economy and is categorised as very high in the Human Development Index. It was the worlds first industrialised country and the worlds foremost power during the 19th, the UK remains a great power with considerable economic, cultural, military, scientific and political influence internationally. It is a nuclear weapons state and its military expenditure ranks fourth or fifth in the world. The UK has been a permanent member of the United Nations Security Council since its first session in 1946 and it has been a leading member state of the EU and its predecessor, the European Economic Community, since 1973. However, on 23 June 2016, a referendum on the UKs membership of the EU resulted in a decision to leave. The Acts of Union 1800 united the Kingdom of Great Britain, Scotland, Wales and Northern Ireland have devolved self-government
12.
Italy
–
Italy, officially the Italian Republic, is a unitary parliamentary republic in Europe. Located in the heart of the Mediterranean Sea, Italy shares open land borders with France, Switzerland, Austria, Slovenia, San Marino, Italy covers an area of 301,338 km2 and has a largely temperate seasonal climate and Mediterranean climate. Due to its shape, it is referred to in Italy as lo Stivale. With 61 million inhabitants, it is the fourth most populous EU member state, the Italic tribe known as the Latins formed the Roman Kingdom, which eventually became a republic that conquered and assimilated other nearby civilisations. The legacy of the Roman Empire is widespread and can be observed in the distribution of civilian law, republican governments, Christianity. The Renaissance began in Italy and spread to the rest of Europe, bringing a renewed interest in humanism, science, exploration, Italian culture flourished at this time, producing famous scholars, artists and polymaths such as Leonardo da Vinci, Galileo, Michelangelo and Machiavelli. The weakened sovereigns soon fell victim to conquest by European powers such as France, Spain and Austria. Despite being one of the victors in World War I, Italy entered a period of economic crisis and social turmoil. The subsequent participation in World War II on the Axis side ended in defeat, economic destruction. Today, Italy has the third largest economy in the Eurozone and it has a very high level of human development and is ranked sixth in the world for life expectancy. The country plays a prominent role in regional and global economic, military, cultural and diplomatic affairs, as a reflection of its cultural wealth, Italy is home to 51 World Heritage Sites, the most in the world, and is the fifth most visited country. The assumptions on the etymology of the name Italia are very numerous, according to one of the more common explanations, the term Italia, from Latin, Italia, was borrowed through Greek from the Oscan Víteliú, meaning land of young cattle. The bull was a symbol of the southern Italic tribes and was often depicted goring the Roman wolf as a defiant symbol of free Italy during the Social War. Greek historian Dionysius of Halicarnassus states this account together with the legend that Italy was named after Italus, mentioned also by Aristotle and Thucydides. The name Italia originally applied only to a part of what is now Southern Italy – according to Antiochus of Syracuse, but by his time Oenotria and Italy had become synonymous, and the name also applied to most of Lucania as well. The Greeks gradually came to apply the name Italia to a larger region, excavations throughout Italy revealed a Neanderthal presence dating back to the Palaeolithic period, some 200,000 years ago, modern Humans arrived about 40,000 years ago. Other ancient Italian peoples of undetermined language families but of possible origins include the Rhaetian people and Cammuni. Also the Phoenicians established colonies on the coasts of Sardinia and Sicily, the Roman legacy has deeply influenced the Western civilisation, shaping most of the modern world
Johnnie Wakefield
Luigi Villoresi
Toulo de Graffenried
B. Bira
Pierre Levegh
Louis Chiron
Juan Manuel Fangio
Harry Schell
