National Register of Historic Places listings in Polk County, Arkansas
This is a list of the National Register of Historic Places listings in Polk County, Arkansas. This is intended to be a complete list of the properties and districts on the National Register of Historic Places in Polk County, United States; the locations of National Register properties and districts for which the latitude and longitude coordinates are included below, may be seen in a map. There are 29 properties and districts listed on the National Register in the county. Another two properties have been removed; this National Park Service list is complete through NPS recent listings posted April 12, 2019. List of National Historic Landmarks in Arkansas National Register of Historic Places listings in Arkansas
A county seat is an administrative center, seat of government, or capital city of a county or civil parish. The term is used in Canada, Romania and the United States. County towns have a similar function in the United Kingdom and Republic of Ireland, in Jamaica. In most of the United States, counties are the political subdivisions of a state; the city, town, or populated place that houses county government is known as the seat of its respective county. The county legislature, county courthouse, sheriff's department headquarters, hall of records and correctional facility are located in the county seat though some functions may be located or conducted in other parts of the county if it is geographically large. A county seat is but not always, an incorporated municipality; the exceptions include the county seats of counties that have no incorporated municipalities within their borders, such as Arlington County, Virginia. Ellicott City, the county seat of Howard County, is the largest unincorporated county seat in the United States, followed by Towson, the county seat of Baltimore County, Maryland.
Some county seats may not be incorporated in their own right, but are located within incorporated municipalities. For example, Cape May Court House, New Jersey, though unincorporated, is a section of Middle Township, an incorporated municipality. In some of the colonial states, county seats include or included "Court House" as part of their name. In the Canadian provinces of Prince Edward Island, New Brunswick, Nova Scotia, the term "shire town" is used in place of county seat. County seats in Taiwan are the administrative centers of the counties. There are 13 county seats in Taiwan, which are in the forms of county-administered city, urban township or rural township. Most counties have only one county seat. However, some counties in Alabama, Georgia, Kentucky, Mississippi, New Hampshire, New York, Vermont have two or more county seats located on opposite sides of the county. An example is Harrison County, which lists both Biloxi and Gulfport as county seats; the practice of multiple county seat towns dates from the days.
There have been few efforts to eliminate the two-seat arrangement, since a county seat is a source of pride for the towns involved. There are 36 counties with multiple county seats in 11 states: Coffee County, Alabama St. Clair County, Alabama Arkansas County, Arkansas Carroll County, Arkansas Clay County, Arkansas Craighead County, Arkansas Franklin County, Arkansas Logan County, Arkansas Mississippi County, Arkansas Prairie County, Arkansas Sebastian County, Arkansas Yell County, Arkansas Columbia County, Georgia Lee County, Iowa Campbell County, Kentucky Kenton County, Kentucky Essex County, Massachusetts Middlesex County, Massachusetts Plymouth County, Massachusetts Bolivar County, Mississippi Carroll County, Mississippi Chickasaw County, Mississippi Harrison County, Mississippi Hinds County, Mississippi Jasper County, Mississippi Jones County, Mississippi Panola County, Mississippi Tallahatchie County, Mississippi Yalobusha County, Mississippi Jackson County, Missouri Hillsborough County, New Hampshire Seneca County, New York Bennington County, Vermont In New England, the town, not the county, is the primary division of local government.
Counties in this region have served as dividing lines for the states' judicial systems. Connecticut and Rhode Island have no county level of thus no county seats. In Vermont and Maine the county seats are designated shire towns. County government consists only of a Superior Court and Sheriff, both located in the respective shire town. Bennington County has two shire towns. In Massachusetts, most government functions which would otherwise be performed by county governments in other states are performed by town or city governments; as such, Massachusetts has dissolved many of its county governments, the state government now operates the registries of deeds and sheriff's offices in those counties. In Virginia, a county seat may be an independent city surrounded by, but not part of, the county of which it is the administrative center. Two counties in South Dakota have their county seat and government services centered in a neighboring county, their county-level services are provided by Fall River Tripp County, respectively.
In Louisiana, divided into parishes rather than counties, county seats are referred to as parish seats. Alaska is divided into boroughs rather than counties; the Unorganized Borough, which covers 49 % of Alaska's area, has equivalent. The state with the most counties is Texas, with 254, the state with the fewest counties is Delaware, with 3. County seat war Administrative center County town, administrative centres in Ireland and the UK Chef-lieu, administrative centres in Algeria, Luxembourg, France and Tunisia Municipality, equivalent to county in many c
A tornado is a rotating column of air, in contact with both the surface of the Earth and a cumulonimbus cloud or, in rare cases, the base of a cumulus cloud. The windstorm is referred to as a twister, whirlwind or cyclone, although the word cyclone is used in meteorology to name a weather system with a low-pressure area in the center around which winds blow counterclockwise in the Northern Hemisphere and clockwise in the Southern. Tornadoes come in many shapes and sizes, they are visible in the form of a condensation funnel originating from the base of a cumulonimbus cloud, with a cloud of rotating debris and dust beneath it. Most tornadoes have wind speeds less than 110 miles per hour, are about 250 feet across, travel a few miles before dissipating; the most extreme tornadoes can attain wind speeds of more than 300 miles per hour, are more than two miles in diameter, stay on the ground for dozens of miles. Various types of tornadoes include the multiple vortex tornado and waterspout. Waterspouts are characterized by a spiraling funnel-shaped wind current, connecting to a large cumulus or cumulonimbus cloud.
They are classified as non-supercellular tornadoes that develop over bodies of water, but there is disagreement over whether to classify them as true tornadoes. These spiraling columns of air develop in tropical areas close to the equator and are less common at high latitudes. Other tornado-like phenomena that exist in nature include the gustnado, dust devil, fire whirl, steam devil. Tornadoes occur most in North America in central and southeastern regions of the United States colloquially known as tornado alley, as well as in Southern Africa and southeast Europe and southeastern Australia, New Zealand and adjacent eastern India, southeastern South America. Tornadoes can be detected before or as they occur through the use of Pulse-Doppler radar by recognizing patterns in velocity and reflectivity data, such as hook echoes or debris balls, as well as through the efforts of storm spotters. There are several scales for rating the strength of tornadoes; the Fujita scale rates tornadoes by damage caused and has been replaced in some countries by the updated Enhanced Fujita Scale.
An F0 or EF0 tornado, the weakest category, damages trees, but not substantial structures. An F5 or EF5 tornado, the strongest category, rips buildings off their foundations and can deform large skyscrapers; the similar TORRO scale ranges from a T0 for weak tornadoes to T11 for the most powerful known tornadoes. Doppler radar data and ground swirl patterns may be analyzed to determine intensity and assign a rating; the word tornado comes from the Spanish word tornado. Tornadoes opposite phenomena are the derechoes. A tornado is commonly referred to as a "twister", is sometimes referred to by the old-fashioned colloquial term cyclone; the term "cyclone" is used as a synonym for "tornado" in the often-aired 1939 film The Wizard of Oz. The term "twister" is used in that film, along with being the title of the 1996 tornado-related film Twister. A tornado is "a violently rotating column of air, in contact with the ground, either pendant from a cumuliform cloud or underneath a cumuliform cloud, visible as a funnel cloud".
For a vortex to be classified as a tornado, it must be in contact with both the ground and the cloud base. Scientists have not yet created a complete definition of the word. Tornado refers to the vortex of wind, not the condensation cloud. A tornado is not visible; this results in the formation of a visible funnel condensation funnel. There is some disagreement over the definition of a condensation funnel. According to the Glossary of Meteorology, a funnel cloud is any rotating cloud pendant from a cumulus or cumulonimbus, thus most tornadoes are included under this definition. Among many meteorologists, the'funnel cloud' term is defined as a rotating cloud, not associated with strong winds at the surface, condensation funnel is a broad term for any rotating cloud below a cumuliform cloud. Tornadoes begin as funnel clouds with no associated strong winds at the surface, not all funnel clouds evolve into tornadoes. Most tornadoes produce strong winds at the surface while the visible funnel is still above the ground, so it is difficult to discern the difference between a funnel cloud and a tornado from a distance.
A single storm will produce more than one tornado, either or in succession. Multiple tornadoes produced by the same storm cell are referred to as a "tornado family". Several tornadoes are sometimes spawned from the same large-scale storm system. If there is no break in activity, this is considered a tornado outbreak. A period of several successive days with tornado outbreaks in the same general area is a tornado outbreak sequence called an extended tornado outbreak. Most tornadoes take on the appearance of a narrow funnel, a few hundred yards across, with a small cloud of debris near the ground. Tornadoes may
Manganese is a chemical element with symbol Mn and atomic number 25. It is not found as a free element in nature. Manganese is a metal with important industrial metal alloy uses in stainless steels. Manganese is named for pyrolusite and other black minerals from the region of Magnesia in Greece, which gave its name to magnesium and the iron ore magnetite. By the mid-18th century, Swedish-German chemist Carl Wilhelm Scheele had used pyrolusite to produce chlorine. Scheele and others were aware that pyrolusite contained a new element, but they were unable to isolate it. Johan Gottlieb Gahn was the first to isolate an impure sample of manganese metal in 1774, which he did by reducing the dioxide with carbon. Manganese phosphating is used for corrosion prevention on steel. Ionized manganese is used industrially as pigments of various colors, which depend on the oxidation state of the ions; the permanganates of alkali and alkaline earth metals are powerful oxidizers. Manganese dioxide is used as the cathode material in alkaline batteries.
In biology, manganese ions function as cofactors for a large variety of enzymes with many functions. Manganese enzymes are essential in detoxification of superoxide free radicals in organisms that must deal with elemental oxygen. Manganese functions in the oxygen-evolving complex of photosynthetic plants. While the element is a required trace mineral for all known living organisms, it acts as a neurotoxin in larger amounts. Through inhalation, it can cause manganism, a condition in mammals leading to neurological damage, sometimes irreversible. Manganese is a silvery-gray metal, it is hard and brittle, difficult to fuse, but easy to oxidize. Manganese metal and its common ions are paramagnetic. Manganese tarnishes in air and oxidizes like iron in water containing dissolved oxygen. Occurring manganese is composed of one stable isotope, 55Mn. Eighteen radioisotopes have been isolated and described, ranging in atomic weight from 46 u to 65 u; the most stable are 53Mn with a half-life of 3.7 million years, 54Mn with a half-life of 312.3 days, 52Mn with a half-life of 5.591 days.
All of the remaining radioactive isotopes have half-lives of less than three hours, the majority of less than one minute. The primary decay mode before the most abundant stable isotope, 55Mn, is electron capture and the primary mode after is beta decay. Manganese has three meta states. Manganese is part of the iron group of elements, which are thought to be synthesized in large stars shortly before the supernova explosion. 53Mn decays to 53Cr with a half-life of 3.7 million years. Because of its short half-life, 53Mn is rare, produced by cosmic rays impact on iron. Manganese isotopic contents are combined with chromium isotopic contents and have found application in isotope geology and radiometric dating. Mn–Cr isotopic ratios reinforce the evidence from 26Al and 107Pd for the early history of the solar system. Variations in 53Cr/52Cr and Mn/Cr ratios from several meteorites suggest an initial 53Mn/55Mn ratio, which indicates that Mn–Cr isotopic composition must result from in situ decay of 53Mn in differentiated planetary bodies.
Hence, 53Mn provides additional evidence for nucleosynthetic processes before coalescence of the solar system. The most common oxidation states of manganese are +2, +3, +4, +6, +7, though all oxidation states from −3 to +7 have been observed. Mn2+ competes with Mg2+ in biological systems. Manganese compounds where manganese is in oxidation state +7, which are restricted to the unstable oxide Mn2O7, compounds of the intensely purple permanganate anion MnO4−, a few oxyhalides, are powerful oxidizing agents. Compounds with oxidation states +5 and +6 are strong oxidizing agents and are vulnerable to disproportionation; the most stable oxidation state for manganese is +2, which has a pale pink color, many manganese compounds are known, such as manganese sulfate and manganese chloride. This oxidation state is seen in the mineral rhodochrosite. Manganese most exists with a high spin, S = 5/2 ground state because of the high pairing energy for manganese. However, there are a few examples of S = 1/2 manganese.
There are no spin-allowed d–d transitions in manganese, explaining why manganese compounds are pale to colorless. The +3 oxidation state is known in compounds like manganese acetate, but these are quite powerful oxidizing agents and prone to disproportionation in solution, forming manganese and manganese. Solid compounds of manganese are characterized by its strong purple-red color and a preference for distorted octahedral coordination resulting from the Jahn-Teller effect; the oxidation state +5 can be produced by dissolving manganese dioxide in molten sodium nitrite. Manganate salts can be produced by dissolving Mn compounds, such as manganese dioxide, in molten alkali while exposed to air. Permanganate compounds are purple, can give glass a violet color. Potassium permanganate, sodium permanganate, barium permanganate are all potent oxidizers. Potassium permanganate called Condy's crystals, is a used laboratory reagent because of its oxidizing properties. Solutions of potassium permanganate were among the first stains and fixatives to be used in the preparation of biological cells and tissues for electron microscopy
1940 United States Census
The Sixteenth United States Census, conducted by the Census Bureau, determined the resident population of the United States to be 132,164,569, an increase of 7.3 percent over the 1930 population of 123,202,624 people. The census date of record was April 1, 1940. A number of new questions were asked including where people were 5 years before, highest educational grade achieved, information about wages; this census introduced sampling techniques. Other innovations included a field test of the census in 1939; this was the first census in which every state had a population greater than 100,000. The 1940 census collected the following information: In addition, a sample of individuals were asked additional questions covering age at first marriage and other topics. Full documentation on the 1940 census, including census forms and a procedural history, is available from the Integrated Public Use Microdata Series. Following completion of the census, the original enumeration sheets were microfilmed; as required by Title 13 of the U.
S. Code, access to identifiable information from census records was restricted for 72 years. Non-personally identifiable information Microdata from the 1940 census is available through the Integrated Public Use Microdata Series. Aggregate data for small areas, together with electronic boundary files, can be downloaded from the National Historical Geographic Information System. On April 2, 2012—72 years after the census was taken—microfilmed images of the 1940 census enumeration sheets were released to the public by the National Archives and Records Administration; the records are indexed only by enumeration district upon initial release. Official 1940 census website 1940 Census Records from the U. S. National Archives and Records Administration 1940 Federal Population Census Videos, training videos for enumerators at the U. S. National Archives Selected Historical Decennial Census Population and Housing Counts from the U. S. Census Bureau Snow, Michael S. "Why the huge interest in the 1940 Census?"
CNN. Monday April 9, 2012. 1941 U. S Census Report Contains 1940 Census results 1940 Census Questions Hosted at CensusFinder.com
In biology, a population is all the organisms of the same group or species, which live in a particular geographical area, have the capability of interbreeding. The area of a sexual population is the area where inter-breeding is possible between any pair within the area, where the probability of interbreeding is greater than the probability of cross-breeding with individuals from other areas. In sociology, population refers to a collection of humans. Demography is a social science. Population in simpler terms is the number of people in a city or town, country or world. In population genetics a sex population is a set of organisms in which any pair of members can breed together; this means that they can exchange gametes to produce normally-fertile offspring, such a breeding group is known therefore as a Gamo deme. This implies that all members belong to the same species. If the Gamo deme is large, all gene alleles are uniformly distributed by the gametes within it, the Gamo deme is said to be panmictic.
Under this state, allele frequencies can be converted to genotype frequencies by expanding an appropriate quadratic equation, as shown by Sir Ronald Fisher in his establishment of quantitative genetics. This occurs in Nature: localization of gamete exchange – through dispersal limitations, preferential mating, cataclysm, or other cause – may lead to small actual Gamo demes which exchange gametes reasonably uniformly within themselves but are separated from their neighboring Gamo demes. However, there may be low frequencies of exchange with these neighbors; this may be viewed as the breaking up of a large sexual population into smaller overlapping sexual populations. This failure of panmixia leads to two important changes in overall population structure: the component Gamo demos vary in their allele frequencies when compared with each other and with the theoretical panmictic original; the overall rise in homozygosity is quantified by the inbreeding coefficient. Note that all homozygotes are increased in frequency – both the deleterious and the desirable.
The mean phenotype of the Gamo demes collection is lower than that of the panmictic original –, known as inbreeding depression. It is most important to note, that some dispersion lines will be superior to the panmictic original, while some will be about the same, some will be inferior; the probabilities of each can be estimated from those binomial equations. In plant and animal breeding, procedures have been developed which deliberately utilize the effects of dispersion, it can be shown that dispersion-assisted selection leads to the greatest genetic advance, is much more powerful than selection acting without attendant dispersion. This is so for both autogamous Gamo demes. In ecology, the population of a certain species in a certain area can be estimated using the Lincoln Index. According to the United States Census Bureau the world's population was about 7.55 billion in 2019 and that the 7 billion number was surpassed on 12 March 2012. According to a separate estimate by the United Nations, Earth’s population exceeded seven billion in October 2011, a milestone that offers unprecedented challenges and opportunities to all of humanity, according to UNFPA, the United Nations Population Fund.
According to papers published by the United States Census Bureau, the world population hit 6.5 billion on 24 February 2006. The United Nations Population Fund designated 12 October 1999 as the approximate day on which world population reached 6 billion; this was about 12 years after world population reached 5 billion in 1987, 6 years after world population reached 5.5 billion in 1993. The population of countries such as Nigeria, is not known to the nearest million, so there is a considerable margin of error in such estimates. Researcher Carl Haub calculated that a total of over 100 billion people have been born in the last 2000 years. Population growth increased as the Industrial Revolution gathered pace from 1700 onwards; the last 50 years have seen a yet more rapid increase in the rate of population growth due to medical advances and substantial increases in agricultural productivity beginning in the 1960s, made by the Green Revolution. In 2017 the United Nations Population Division projected that the world's population will reach about 9.8 billion in 2050 and 11.2 billion in 2100.
In the future, the world's population is expected to peak, after which it will decline due to economic reasons, health concerns, land exhaustion and environmental hazards. According to one report, it is likely that the world's population will stop growing before the end of the 21st century. Further, there is some likelihood that population will decline before 2100. Population has declined in the last decade or two in Eastern Europe, the Baltics and in the Commonwealth of Independent States; the population pattern of less-developed regions of the world in recent years has been marked by increasing birth rates. These followed an earlier sharp reduction in death rates; this transition from high birth and death rates to low birth
United States Census Bureau
The United States Census Bureau is a principal agency of the U. S. Federal Statistical System, responsible for producing data about the American people and economy; the Census Bureau is part of the U. S. Department of Commerce and its director is appointed by the President of the United States; the Census Bureau's primary mission is conducting the U. S. Census every ten years, which allocates the seats of the U. S. House of Representatives to the states based on their population; the Bureau's various censuses and surveys help allocate over $400 billion in federal funds every year and it helps states, local communities, businesses make informed decisions. The information provided by the census informs decisions on where to build and maintain schools, transportation infrastructure, police and fire departments. In addition to the decennial census, the Census Bureau continually conducts dozens of other censuses and surveys, including the American Community Survey, the U. S. Economic Census, the Current Population Survey.
Furthermore and foreign trade indicators released by the federal government contain data produced by the Census Bureau. Article One of the United States Constitution directs the population be enumerated at least once every ten years and the resulting counts used to set the number of members from each state in the House of Representatives and, by extension, in the Electoral College; the Census Bureau now conducts a full population count every 10 years in years ending with a zero and uses the term "decennial" to describe the operation. Between censuses, the Census Bureau makes population projections. In addition, Census data directly affects how more than $400 billion per year in federal and state funding is allocated to communities for neighborhood improvements, public health, education and more; the Census Bureau is mandated with fulfilling these obligations: the collecting of statistics about the nation, its people, economy. The Census Bureau's legal authority is codified in Title 13 of the United States Code.
The Census Bureau conducts surveys on behalf of various federal government and local government agencies on topics such as employment, health, consumer expenditures, housing. Within the bureau, these are known as "demographic surveys" and are conducted perpetually between and during decennial population counts; the Census Bureau conducts economic surveys of manufacturing, retail and other establishments and of domestic governments. Between 1790 and 1840, the census was taken by marshals of the judicial districts; the Census Act of 1840 established a central office. Several acts followed that revised and authorized new censuses at the 10-year intervals. In 1902, the temporary Census Office was moved under the Department of Interior, in 1903 it was renamed the Census Bureau under the new Department of Commerce and Labor; the department was intended to consolidate overlapping statistical agencies, but Census Bureau officials were hindered by their subordinate role in the department. An act in 1920 changed the date and authorized manufacturing censuses every two years and agriculture censuses every 10 years.
In 1929, a bill was passed mandating the House of Representatives be reapportioned based on the results of the 1930 Census. In 1954, various acts were codified into Title 13 of the US Code. By law, the Census Bureau must count everyone and submit state population totals to the U. S. President by December 31 of any year ending in a zero. States within the Union receive the results in the spring of the following year; the United States Census Bureau defines four statistical regions, with nine divisions. The Census Bureau regions are "widely used...for data collection and analysis". The Census Bureau definition is pervasive. Regional divisions used by the United States Census Bureau: Region 1: Northeast Division 1: New England Division 2: Mid-Atlantic Region 2: Midwest Division 3: East North Central Division 4: West North Central Region 3: South Division 5: South Atlantic Division 6: East South Central Division 7: West South Central Region 4: West Division 8: Mountain Division 9: Pacific Many federal, state and tribal governments use census data to: Decide the location of new housing and public facilities, Examine the demographic characteristics of communities and the US, Plan transportation systems and roadways, Determine quotas and creation of police and fire precincts, Create localized areas for elections, utilities, etc.
Gathers population information every 10 years The United States Census Bureau is committed to confidentiality, guarantees non-disclosure of any addresses or personal information related to individuals or establishments. Title 13 of the U. S. Code establishes penalties for the disclosure of this information. All Census employees must sign an affidavit of non-disclosure prior to employment; the Bureau cannot share responses, addresses or personal information with anyone including United States or foreign government