A mercury-vapor lamp is a gas-discharge lamp that uses an electric arc through vaporized mercury to produce light. The arc discharge is generally confined to a small fused quartz arc tube mounted with
A 175-watt mercury-vapor light approximately 15 seconds after starting.
A closeup of a 175-W mercury-vapor lamp. The small diagonal cylinder at the bottom of the arc tube is a resistor which supplies current to the starter electrode.
Production of high-pressure mercury-vapor lamps, 1965
A sodium-vapor lamp is a gas-discharge lamp that uses sodium in an excited state to produce light at a characteristic wavelength near 589 nm.
Mercury-vapor lamp
…process, but is also a health hazard. For placements where light pollution is of prime importance (for example, the parking lot of an observatory), low-pressure sodium is preferred. As it emits narrow spectral lines at two very close wavelengths, it is the easiest to filter out. Mercury-vapor lamps without any phosphor…
Sodium street lights in Tuntorp, Sweden
An HPS lamp after turning off. The alumina material glows red because it is still hot.
Two Honda Fits under low-pressure sodium lamps. Both appear black, even though the car on the left is bright red, while the car on the right is actually black.
High-pressure sodium lamps (SON).