In electrical engineering, a protective relay is a relay device designed to trip a circuit breaker when a fault is detected. The first protective relays were electromagnetic devices, relying on coils
Electromechanical protective relays at a hydroelectric generating plant. The relays are in round glass cases. The rectangular devices are test connection blocks, used for testing and isolation of instrument transformer circuits.
When the input current is above the current limit, the disk rotates, the contact moves left and reaches the fixed contact. The scale above the plate indicates the delay-time.
A digital (numeric) multifunction protective relay for distribution networks. A single such device can replace many single-function electromechanical relays, and provides self-testing and communication functions.
A dual powered protection relay powered by the current obtained from the line by a CT. The striker is also shown
Induction disk motor is a low-power, low-speed AC motor that is primarily known for its use in analog electrical meters. It is also called a Ferraris disk after the inventor, Galileo Ferraris.
Protective relay
…well-established, selectable, and adjustable time and current (or other operating parameter) operating characteristics. Protection relays may use arrays of induction disks, shaded-pole, magnets, operating and restraint coils, solenoid-type operators, telephone-relay contacts, and phase-shifting networks. Protective relays…
Induction disk from an electrical meter
A three-phase electricity meter (open) using two induction disks on a common shaft: (1) counter, (2) adjustable eddy brake (permanent magnet), (3) one of the three current coils (4) – one of the three voltage coils