RD-0110

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
RD-0110
RD-0110 rocket engine.jpg
Country of origin USSR
First flight 1965-10-05
Designer KBKhA
Manufacturer Voronezh Mechanical Plant[1]
Application Upper Stage
Associated L/V Molniya-M and Soyuz
Predecessor RD-0108
Status In Production
Liquid-fuel engine
Propellant LOX / RG-1
Mixture ratio 2.2[2]
Cycle Gas Generator
Configuration
Chamber 4
Performance
Thrust (vac.) 298 kilonewtons (67,000 lbf)
Thrust-to-weight ratio 74.36[3]
Chamber pressure 6.8 megapascals (990 psi)
Isp (vac.) 326 seconds
Burn time 250 s
Dimensions
Length 1,575 millimetres (62.0 in)
Diameter 2,240 millimetres (88 in)
Dry weight 408.5 kilograms (901 lb)
Used in
Molniya-M Block-I and on most Soyuz Block-I
References
References [4]

The RD-0110 (or RO-8 , RD-0108 , RD-461 ) is a rocket engine burning liquid oxygen and kerosene in a gas generator combustion cycle. It has four fixed nozzles and the output of the gas generator is directed to four secondary vernier nozzles to supply vector control of the stage, it has an extensive flight history with its initial versions having flown more than 57 years ago (as of February 2018).[5][6][7]

History[edit]

OKB-154 of S.A. Kosberg was tasked with developing an engine for the unmanned Molniya Block-I stage. Thus, the RD-0107 was developed in the 1960 to 1961 period, based on the RD-0106 (GRAU Index: 8D715) engine that powered the SS-8 Sasin ICBM, also designed by OKB-154. It also leveraged the experience in the field from the Vostok Block-E RD-0105/RD-0109 development.[4][7][8][9] The engine had its debut flight on October 10, 1960, and the last Molniya flight was on October 22, 1967.[4][10]

For the crewed carrying Voskhod Block-I, a version of the engine that complied with the human rating 3K Regulations was needed, during 1963 OKB-154 developed this new version of the engine. Known with by the GRAU index 8D715P, the RD-0108 kept the same characteristics and performance of the RD-0107 while fully complying with the crew rating regulations,[11] this engine had its first flight on November 16, 1963 and last flew on June 29th, 1976.[4][12]

For the Molniya-M Block-I, OKB-154 did an improvement program that put special emphasis on the reliability of the engine, this project gave birth to the RD-0110. A particular problem observed during acceptance testing were high frequency instabilities, particularly during the start sequence, but it was solved by installing of longitudinal felt ribs on the combustion chamber.[3] The development of the RD-0110 was performed in 9 months during 1963, with its inaugural flight happening in 1964,[5] it is also used on the Soyuz third stage in all models until the RD-0124 debut on the 2.1b. It has flown over 1350 times, and accumulated more than 336,500 s of burn time and it still flown many times per year.[5]

Design[edit]

The RD-0110 was created in a period when KbKhA had just started to design rocket engines, after many studies, simplicity and reliability were the main drivers of the design. For this reason a single shaft integrating the LOX pump, the RG-1 pump and the turbine was chosen. To provide acceptable suction performance, the RD-0110 turbopump has a dual inlet design with back to back centrifugal impellers, this allows it to work at relatively low inlet pressures without requiring additional booster pumps. The turbine is driven by a fuel rich gas generator,[5] the ignition system for both the gas generator and the combustion chamber is done by pyrotechnic devices. The engine control is handled by a regulator, a throttle and a set of valves, it can throttle between 100% and 90.5% with the option of short 107% in case of an emergency.[3]

During development, combustion instability issues were observed, the problem was found to be intimately related to the injection system design. It was finally solved by developing an optimized bi-propellant centrifugal atomizer design, during certification testing, high frequency combustion instabilities at start up were still observed. Even though the start instabilities were relatively rare at 1 in 60 to 80, and only on acceptance bench, great effort was made to eliminate the issue. Thanks to acoustic studies and modelling, a solution was found. Six combustible longitudinal felt ribs were placed at the inner surface of the combustion chamber and this solved the issue permanently.[3]

The RD-0110 uses fuel as coolant for the regen cooling system, as most other Soviet designs, it uses a corrugated metal construction for the cooling jackets. The thrust chamber and upper nozzle sections has the corrugated metal sandwiched between an inner and outer metal layers, the lower section of the nozzle has no external lining, exposing the corrugated jacket to save weight. All this sections use steel for construction. Given the extreme temperatures at the throat section, this part is made of copper alloy with milled channels and an external lining. A separate film cooling system is implemented though a different manifold and is injected though a circular slot upstream of the throat.[13]

Production[edit]

The RD-0107/0108/0110 engines are produced on the Voronezh Mechanical Plant.[1][7]

Versions[edit]

Modifications to the RD-0107 design have led to production of three distinct versions of the engine:

  • RD-0107 (GRAU Index: 8D715K), also known as RD-461 or RO-8.[2] Used on unmanned Voskhod boosters.
  • RD-0108 (GRAU Index: 8D715P), also known as 11D55, RD-461 or RO-8.[2] Used on the two manned Voskhod launches and the first six Molniya M boosters.
  • RD-0110 (GRAU Index: 8D715P), also known as 11D55 or RD-461.[2] Used on the Soyuz/L/U/U2/FG/2.1a and almost all Molniya Ms.

See also[edit]

References[edit]

  1. ^ a b "Liquid Rocket Engine". Voronezh Mechanical Plant. Retrieved 2015-05-29. 
  2. ^ a b c d "RD-0107". Encyclopedia Astronautica. Retrieved 2015-05-29. 
  3. ^ a b c d Rubinsky, Vitaly R. (1995). "Chapter 4: Combustion Instability in the RD-0110 Engine". In Anderson, William E.; Yang, Vigor. Progress in Astronautics and Aeronautics Volume 169: Liquid Rocket Engine Combustion Instability. AIAA. pp. 89–112. doi:10.2514/4.866371. ISBN 978-1-56347-183-4. Retrieved 2015-05-30. 
  4. ^ a b c d "RD0107, RD0108, RD0110. Molniya (8K78), Voskhod (8K78M), Soyuz (11A511У) launch vehicles". KBKhA. Retrieved 2015-05-29. 
  5. ^ a b c d "Turbopumps for Gas Generator and Staged Combustion Cycle Rocket Engines" (PDF). AIAA. July 2005. Retrieved 2015-05-29. 
  6. ^ "R-7/Soyuz Data Sheet". Space Launch Report. Retrieved 2015-05-29. 
  7. ^ a b c Zak, Anatoly. "RD-0110". russianspaceweb.com. Retrieved 2015-05-29. 
  8. ^ "RD-0106". Encyclopedia Astronautica. Retrieved 2015-05-30. 
  9. ^ "RD0105. Luna (8K72) launch vehicle. RD0109. Vostok (8K72K) launch vehicle". KBKhA. Retrieved 2015-05-29. 
  10. ^ Pillet, Nicolas. "Liste des lancements Molnia" (in French). Kosmonavtika.com. Retrieved 2015-05-30. 
  11. ^ "Part 9: Launchers for an Early Circumlunar Programme". Cosmopark.ru. Retrieved 2015-05-29. 
  12. ^ Pillet, Nicolas. "Liste des lancements Voskhod" (in French). Kosmonavtika.com. Retrieved 2015-05-30. 
  13. ^ Sutton, George Paul (November 2005). History of Liquid Propellant Rocket Engines. AIAA. pp. 637–638. ISBN 978-1563476495. 

External links[edit]