1.
Chemical formula
–
These are limited to a single typographic line of symbols, which may include subscripts and superscripts. A chemical formula is not a name, and it contains no words. Although a chemical formula may imply certain simple chemical structures, it is not the same as a full chemical structural formula. Chemical formulas can fully specify the structure of only the simplest of molecules and chemical substances, the simplest types of chemical formulas are called empirical formulas, which use letters and numbers indicating the numerical proportions of atoms of each type. Molecular formulas indicate the numbers of each type of atom in a molecule. For example, the formula for glucose is CH2O, while its molecular formula is C6H12O6. This is possible if the relevant bonding is easy to show in one dimension, an example is the condensed molecular/chemical formula for ethanol, which is CH3-CH2-OH or CH3CH2OH. For reasons of structural complexity, there is no condensed chemical formula that specifies glucose, chemical formulas may be used in chemical equations to describe chemical reactions and other chemical transformations, such as the dissolving of ionic compounds into solution. A chemical formula identifies each constituent element by its chemical symbol, in empirical formulas, these proportions begin with a key element and then assign numbers of atoms of the other elements in the compound, as ratios to the key element. For molecular compounds, these numbers can all be expressed as whole numbers. For example, the formula of ethanol may be written C2H6O because the molecules of ethanol all contain two carbon atoms, six hydrogen atoms, and one oxygen atom. Some types of compounds, however, cannot be written with entirely whole-number empirical formulas. An example is boron carbide, whose formula of CBn is a variable non-whole number ratio with n ranging from over 4 to more than 6.5. When the chemical compound of the consists of simple molecules. These types of formulas are known as molecular formulas and condensed formulas. A molecular formula enumerates the number of atoms to reflect those in the molecule, so that the formula for glucose is C6H12O6 rather than the glucose empirical formula. However, except for very simple substances, molecular chemical formulas lack needed structural information, for simple molecules, a condensed formula is a type of chemical formula that may fully imply a correct structural formula. For example, ethanol may be represented by the chemical formula CH3CH2OH
Chemical formula
–
Al 2 (SO 4) 3
2.
Crystal system
–
In crystallography, the terms crystal system, crystal family and lattice system each refer to one of several classes of space groups, lattices, point groups or crystals. Informally, two crystals are in the crystal system if they have similar symmetries, though there are many exceptions to this. Space groups and crystals are divided into seven crystal systems according to their point groups, five of the crystal systems are essentially the same as five of the lattice systems, but the hexagonal and trigonal crystal systems differ from the hexagonal and rhombohedral lattice systems. The six crystal families are formed by combining the hexagonal and trigonal crystal systems into one hexagonal family, a lattice system is a class of lattices with the same set of lattice point groups, which are subgroups of the arithmetic crystal classes. The 14 Bravais lattices are grouped into seven lattice systems, triclinic, monoclinic, orthorhombic, tetragonal, rhombohedral, hexagonal, in a crystal system, a set of point groups and their corresponding space groups are assigned to a lattice system. Of the 32 point groups that exist in three dimensions, most are assigned to only one system, in which case both the crystal and lattice systems have the same name. However, five point groups are assigned to two systems, rhombohedral and hexagonal, because both exhibit threefold rotational symmetry. These point groups are assigned to the crystal system. In total there are seven crystal systems, triclinic, monoclinic, orthorhombic, tetragonal, trigonal, hexagonal, a crystal family is determined by lattices and point groups. It is formed by combining crystal systems which have space groups assigned to a lattice system. In three dimensions, the families and systems are identical, except the hexagonal and trigonal crystal systems. In total there are six families, triclinic, monoclinic, orthorhombic, tetragonal, hexagonal. Spaces with less than three dimensions have the number of crystal systems, crystal families and lattice systems. In one-dimensional space, there is one crystal system, in 2D space, there are four crystal systems, oblique, rectangular, square and hexagonal. The relation between three-dimensional crystal families, crystal systems and lattice systems is shown in the table, Note. To avoid confusion of terminology, the term trigonal lattice is not used, if the original structure and inverted structure are identical, then the structure is centrosymmetric. Still, even for non-centrosymmetric case, inverted structure in some cases can be rotated to align with the original structure and this is the case of non-centrosymmetric achiral structure. If the inverted structure cannot be rotated to align with the structure, then the structure is chiral
Crystal system
–
Hexagonal
hanksite crystal, with three-fold c-axis symmetry
Crystal system
–
The
diamond crystal structure belongs to the face-centered
cubic lattice, with a repeated 2-atom pattern.
3.
Cubic (crystal system)
–
In crystallography, the cubic crystal system is a crystal system where the unit cell is in the shape of a cube. This is one of the most common and simplest shapes found in crystals and minerals, there are three main varieties of these crystals, Primitive cubic Body-centered cubic, Face-centered cubic Each is subdivided into other variants listed below. Note that although the cell in these crystals is conventionally taken to be a cube. This is related to the fact that in most cubic crystal systems, a classic isometric crystal has square or pentagonal faces. The three Bravais lattices in the crystal system are, The primitive cubic system consists of one lattice point on each corner of the cube. Each atom at a point is then shared equally between eight adjacent cubes, and the unit cell therefore contains in total one atom. The body-centered cubic system has one point in the center of the unit cell in addition to the eight corner points. It has a net total of 2 lattice points per unit cell, Each sphere in a cF lattice has coordination number 12. The face-centered cubic system is related to the hexagonal close packed system. The plane of a cubic system is a hexagonal grid. Attempting to create a C-centered cubic crystal system would result in a simple tetragonal Bravais lattice, there are a total 36 cubic space groups. Other terms for hexoctahedral are, normal class, holohedral, ditesseral central class, a simple cubic unit cell has a single cubic void in the center. Additionally, there are 24 tetrahedral voids located in a square spacing around each octahedral void and these tetrahedral voids are not local maxima and are not technically voids, but they do occasionally appear in multi-atom unit cells. A face-centered cubic unit cell has eight tetrahedral voids located midway between each corner and the center of the cell, for a total of eight net tetrahedral voids. One important characteristic of a structure is its atomic packing factor. This is calculated by assuming all the atoms are identical spheres. The atomic packing factor is the proportion of space filled by these spheres, assuming one atom per lattice point, in a primitive cubic lattice with cube side length a, the sphere radius would be a⁄2 and the atomic packing factor turns out to be about 0.524. Similarly, in a bcc lattice, the atomic packing factor is 0.680, as a rule, since atoms in a solid attract each other, the more tightly packed arrangements of atoms tend to be more common
Cubic (crystal system)
–
A rock containing three crystals of
pyrite (FeS 2). The crystal structure of pyrite is primitive cubic, and this is reflected in the cubic symmetry of its natural
crystal facets.
Cubic (crystal system)
–
A network model of a primitive cubic system.
4.
Crystal class
–
For a periodic crystal, the group must also be consistent with maintenance of the three-dimensional translational symmetry that defines crystallinity. The macroscopic properties of a crystal would look exactly the same before, in the classification of crystals, each point group is also known as a crystal class. There are infinitely many three-dimensional point groups, however, the crystallographic restriction of the infinite families of general point groups results in there being only 32 crystallographic point groups. These 32 point groups are one-and-the same as the 32 types of morphological crystalline symmetries derived in 1830 by Johann Friedrich Christian Hessel from a consideration of observed crystal forms, the point groups are denoted by their component symmetries. There are a few standard notations used by crystallographers, mineralogists, for the correspondence of the two systems below, see crystal system. In Schoenflies notation, point groups are denoted by a symbol with a subscript. The symbols used in crystallography mean the following, Cn indicates that the group has a rotation axis. Cnh is Cn with the addition of a plane perpendicular to the axis of rotation. Cnv is Cn with the addition of n mirror planes parallel to the axis of rotation, s2n denotes a group that contains only a 2n-fold rotation-reflection axis. Dn indicates that the group has a rotation axis plus n twofold axes perpendicular to that axis. Dnh has, in addition, a plane perpendicular to the n-fold axis. Dnd has, in addition to the elements of Dn, mirror planes parallel to the n-fold axis, the letter T indicates that the group has the symmetry of a tetrahedron. Td includes improper rotation operations, T excludes improper rotation operations, the letter O indicates that the group has the symmetry of an octahedron, with or without improper operations. Due to the crystallographic restriction theorem, n =1,2,3,4, d4d and D6d are actually forbidden because they contain improper rotations with n=8 and 12 respectively. The 27 point groups in the table plus T, Td, Th, O, an abbreviated form of the Hermann–Mauguin notation commonly used for space groups also serves to describe crystallographic point groups. Group names are Molecular symmetry Point group Space group Point groups in three dimensions Crystal system Point-group symbols in International Tables for Crystallography,12.1, pp. 818-820 Names and symbols of the 32 crystal classes in International Tables for Crystallography. 10.1, p.794 Pictorial overview of the 32 groups Point Groups - Flow Chart Inorganic Chemistry Group Theory Practice Problems
Crystal class
–
Class
5.
H-M symbol
–
In geometry, Hermann–Mauguin notation is used to represent the symmetry elements in point groups, plane groups and space groups. It is named after the German crystallographer Carl Hermann and the French mineralogist Charles-Victor Mauguin and this notation is sometimes called international notation, because it was adopted as standard by the International Tables For Crystallography since their first edition in 1935. Rotation axes are denoted by a number n —1,2,3,4,5,6,7,8, for improper rotations, Hermann–Mauguin symbols show rotoinversion axes, unlike Schoenflies and Shubnikov notations, where the preference is given to rotation-reflection axes. The rotoinversion axes are represented by the number with a macron. The symbol for a plane is m. The direction of the plane is defined as the direction of perpendicular to the face. Hermann–Mauguin symbols show symmetrically non-equivalent axes and planes, the direction of a symmetry element is represented by its position in the Hermann–Mauguin symbol. If a rotation axis n and a mirror plane m have the same direction, if two or more axes have the same direction, the axis with higher symmetry is shown. Higher symmetry means that the axis generates a pattern with more points, for example, rotation axes 3,4,5,6,7,8 generate 3-, 4-, 5-, 6-, 7-, 8-point patterns, respectively. Improper rotation axes 3,4,5,6,7,8 generate 6-, 4-, 10-, 6-, 14-, 8-point patterns, if both, the rotation and rotoinversion axes satisfy the previous rule, the rotation axis should be chosen. For example, 3/m combination is equivalent to 6, since 6 generates 6 points, and 3 generates only 3,6 should be written instead of 3/m. Analogously, in the case when both 3 and 3 axes are present,3 should be written, however we write 4/m, not 4/m, because both 4 and 4 generate four points. Finally, the Hermann–Mauguin symbol depends on the type of the group and these groups may contain only two-fold axes, mirror planes, and inversion center. These are the point groups 1 and 1,2, m, and 2/m, and 222, 2/m2/m2/m. If the symbol contains three positions, then they denote symmetry elements in the x, y, z direction, First position — primary direction — z direction, assigned to the higher-order axis. Second position — symmetrically equivalent secondary directions, which are perpendicular to the z-axis and these can be 2, m, or 2/m. Third position — symmetrically equivalent tertiary directions, passing between secondary directions and these can be 2, m, or 2/m. These are the crystallographic groups 3,32, 3m,3, and 32/m,4,422, 4mm,4, 42m, 4/m, and 4/m2/m2/m, and 6,622, 6mm,6, 6m2, 6/m, and 6/m2/m2/m
H-M symbol
–
Contents
6.
Space group
–
In mathematics, physics and chemistry, a space group is the symmetry group of a configuration in space, usually in three dimensions. In three dimensions, there are 219 distinct types, or 230 if chiral copies are considered distinct, Space groups are also studied in dimensions other than 3 where they are sometimes called Bieberbach groups, and are discrete cocompact groups of isometries of an oriented Euclidean space. In crystallography, space groups are called the crystallographic or Fedorov groups. A definitive source regarding 3-dimensional space groups is the International Tables for Crystallography, in 1879 Leonhard Sohncke listed the 65 space groups whose elements preserve the orientation. More accurately, he listed 66 groups, but Fedorov and Schönflies both noticed that two of them were really the same, the space groups in 3 dimensions were first enumerated by Fedorov, and shortly afterwards were independently enumerated by Schönflies. The correct list of 230 space groups was found by 1892 during correspondence between Fedorov and Schönflies, burckhardt describes the history of the discovery of the space groups in detail. The space groups in three dimensions are made from combinations of the 32 crystallographic point groups with the 14 Bravais lattices, the combination of all these symmetry operations results in a total of 230 different space groups describing all possible crystal symmetries. The elements of the space group fixing a point of space are rotations, reflections, the identity element, the translations form a normal abelian subgroup of rank 3, called the Bravais lattice. There are 14 possible types of Bravais lattice, the quotient of the space group by the Bravais lattice is a finite group which is one of the 32 possible point groups. Translation is defined as the moves from one point to another point. A glide plane is a reflection in a plane, followed by a parallel with that plane. This is noted by a, b or c, depending on which axis the glide is along. There is also the n glide, which is a glide along the half of a diagonal of a face, and the d glide, the latter is called the diamond glide plane as it features in the diamond structure. In 17 space groups, due to the centering of the cell, the glides occur in two directions simultaneously, i. e. the same glide plane can be called b or c, a or b. For example, group Abm2 could be also called Acm2, group Ccca could be called Cccb, in 1992, it was suggested to use symbol e for such planes. The symbols for five groups have been modified, A screw axis is a rotation about an axis. These are noted by a number, n, to describe the degree of rotation, the degree of translation is then added as a subscript showing how far along the axis the translation is, as a portion of the parallel lattice vector. So,21 is a rotation followed by a translation of 1/2 of the lattice vector
Space group
–
The space group of hexagonal H 2 O ice is P6 3 / mmc. The first m indicates the mirror plane perpendicular to the c-axis (a), the second m indicates the mirror planes parallel to the c-axis (b) and the c indicates the glide planes (b) and (c). The black boxes outline the unit cell.
7.
Crystal structure
–
In crystallography, crystal structure is a description of the ordered arrangement of atoms, ions or molecules in a crystalline material. Ordered structures occur from the nature of the constituent particles to form symmetric patterns that repeat along the principal directions of three-dimensional space in matter. The smallest group of particles in the material that constitutes the pattern is the unit cell of the structure. The unit cell completely defines the symmetry and structure of the crystal lattice. The repeating patterns are said to be located at the points of the Bravais lattice, the lengths of the principal axes, or edges, of the unit cell and the angles between them are the lattice constants, also called lattice parameters. The symmetry properties of the crystal are described by the concept of space groups, all possible symmetric arrangements of particles in three-dimensional space may be described by the 230 space groups. The crystal structure and symmetry play a role in determining many physical properties, such as cleavage, electronic band structure. The crystal structure of a material can be described in terms of its unit cell, the unit cell is a box containing one or more atoms arranged in three dimensions. The unit cells stacked in three-dimensional space describe the arrangement of atoms of the crystal. Commonly, atomic positions are represented in terms of fractional coordinates, the atom positions within the unit cell can be calculated through application of symmetry operations to the asymmetric unit. The asymmetric unit refers to the smallest possible occupation of space within the unit cell and this does not, however imply that the entirety of the asymmetric unit must lie within the boundaries of the unit cell. Symmetric transformations of atom positions are calculated from the group of the crystal structure. Vectors and planes in a lattice are described by the three-value Miller index notation. It uses the indices ℓ, m, and n as directional parameters, which are separated by 90°, by definition, the syntax denotes a plane that intercepts the three points a1/ℓ, a2/m, and a3/n, or some multiple thereof. That is, the Miller indices are proportional to the inverses of the intercepts of the plane with the unit cell, if one or more of the indices is zero, it means that the planes do not intersect that axis. A plane containing a coordinate axis is translated so that it no longer contains that axis before its Miller indices are determined, the Miller indices for a plane are integers with no common factors. Negative indices are indicated with horizontal bars, as in, in an orthogonal coordinate system for a cubic cell, the Miller indices of a plane are the Cartesian components of a vector normal to the plane. Likewise, the planes are geometric planes linking nodes
Crystal structure
–
Quartz is one of the several thermodynamically stable
crystalline forms of
silica, SiO 2. The most important forms of silica include:
α-quartz,
β-quartz,
tridymite,
cristobalite,
coesite, and
stishovite.
Crystal structure
8.
Crystal habit
–
In mineralogy, crystal habit is the characteristic external shape of an individual crystal or crystal group. A single crystals habit is a description of its shape and its crystallographic forms. Recognizing the habit may help in identifying a mineral, when the faces are well-developed due to uncrowded growth a crystal is called euhedral, one with partially developed faces is subhedral, and one with undeveloped crystal faces is called anhedral. The long axis of a quartz crystal typically has a six-sided prismatic habit with parallel opposite faces. Aggregates can be formed of individual crystals with euhedral to anhedral grains, the arrangement of crystals within the aggregate can be characteristic of certain minerals. For example, minerals used for asbestos insulation often grow in a fibrous habit, the terms used by mineralogists to report crystal habits describe the typical appearance of an ideal mineral. Recognizing the habit can aid in identification as some habits are characteristic, most minerals, however, do not display ideal habits due to conditions during crystallization. Minerals belonging to the crystal system do not necessarily exhibit the same habit. Some habits of a mineral are unique to its variety and locality, For example, while most sapphires form elongate barrel-shaped crystals, ordinarily, the latter habit is seen only in ruby. Sapphire and ruby are both varieties of the mineral, corundum. Some minerals may replace other existing minerals while preserving the originals habit, a classic example is tigers eye quartz, crocidolite asbestos replaced by silica. While quartz typically forms prismatic crystals, in tigers eye the original fibrous habit of crocidolite is preserved, the names of crystal habits are derived from, Predominant crystal faces. Abnormal grain growth Grain growth Crystallization
Crystal habit
–
Pyrite sun (or dollar) in laminated shale matrix. Between tightly spaced layers of shale, the aggregate was forced to grow in a laterally compressed, radiating manner. Under normal conditions, pyrite would form cubes or pyritohedrons.
Crystal habit
–
Goethite replacing
pyrite cubes
Crystal habit
–
Acicular
Crystal habit
–
Amygdaloidal
9.
Crystal twinning
–
Crystal twinning occurs when two separate crystals share some of the same crystal lattice points in a symmetrical manner. The result is an intergrowth of two separate crystals in a variety of specific configurations, a twin boundary or composition surface separates the two crystals. Crystallographers classify twinned crystals by a number of twin laws and these twin laws are specific to the crystal system. The type of twinning can be a tool in mineral identification. Twinning can often be a problem in X-ray crystallography, as a crystal does not produce a simple diffraction pattern. Simple twinned crystals may be contact twins or penetration twins, contact twins share a single composition surface often appearing as mirror images across the boundary. Plagioclase, quartz, gypsum, and spinel often exhibit contact twinning, merohedral twinning occurs when the lattices of the contact twins superimpose in three dimensions, such as by relative rotation of one twin from the other. In penetration twins the individual crystals have the appearance of passing through each other in a symmetrical manner, orthoclase, staurolite, pyrite, and fluorite often show penetration twinning. If several twin crystal parts are aligned by the same twin law they are referred to as multiple or repeated twins, if these multiple twins are aligned in parallel they are called polysynthetic twins. When the multiple twins are not parallel they are cyclic twins, albite, calcite, and pyrite often show polysynthetic twinning. Closely spaced polysynthetic twinning is often observed as striations or fine lines on the crystal face. Rutile, aragonite, cerussite, and chrysoberyl often exhibit cyclic twinning, 2-normal twin, -when the twin plane and compositional plane lies noramally. 3-complex twin, -combination of parallel twinning and normal twinning on one compositional plane, there are three modes of formation of twinned crystals. Growth twins are the result of an interruption or change in the lattice during formation or growth due to a possible deformation from a larger substituting ion, deformation or gliding twins are the result of stress on the crystal after the crystal has formed. If a FCC metal like aluminum experiences extreme stresses, it will experience twinning as seen in the case of explosions, deformation twinning is a common result of regional metamorphism. Crystals that grow adjacent to each other may be aligned to resemble twinning and this parallel growth simply reduces system energy and is not twinning. Twin boundaries occur when two crystals of the same type intergrow, so only a slight misorientation exists between them. It is a highly symmetrical interface, often with one crystal the mirror image of the other, also and this is also a much lower-energy interface than the grain boundaries that form when crystals of arbitrary orientation grow together
Crystal twinning
–
Quartz - Japan twin
Crystal twinning
–
Diagram of twinned crystals of
Albite. On the more perfect cleavage, which is parallel to the
basal plane (P), is a system of fine striations, parallel to the second cleavage (M).
Crystal twinning
–
Twinned pyrite crystal group
Crystal twinning
–
Galvanized surface with macroscopic crystalline features. Twin boundaries are visible as striations within each
crystallite, most prominently in the bottom-left and top-right.
10.
Cleavage (crystal)
–
Cleavage, in mineralogy, is the tendency of crystalline materials to split along definite crystallographic structural planes. Cleavage forms parallel to planes, Basal or pinacoidal cleavage occurs when there is only one cleavage plane. Mica also has basal cleavage, this is why mica can be peeled into thin sheets, cubic cleavage occurs on when there are three cleavage planes intersecting at 90 degrees. Halite has cubic cleavage, and therefore, when halite crystals are broken, octahedral cleavage occurs when there are four cleavage planes in a crystal. Octahedral cleavage is common for semiconductors, rhombohedral cleavage occurs when there are three cleavage planes intersecting at angles that are not 90 degrees. Prismatic cleavage occurs when there are two planes in a crystal. Dodecahedral cleavage occurs when there are six cleavage planes in a crystal, crystal parting occurs when minerals break along planes of structural weakness due to external stress or along twin composition planes. Parting breaks are very similar in appearance to cleavage, but only due to stress. Examples include magnetite which shows octahedral parting, the parting of corundum. Cleavage is a property traditionally used in mineral identification, both in hand specimen and microscopic examination of rock and mineral studies. As an example, the angles between the cleavage planes for the pyroxenes and the amphiboles are diagnostic. Crystal cleavage is of importance in the electronics industry and in the cutting of gemstones. Precious stones are generally cleaved by impact, as in diamond cutting, synthetic single crystals of semiconductor materials are generally sold as thin wafers which are much easier to cleave. Elemental semiconductors are diamond cubic, a group for which octahedral cleavage is observed. This means that some orientations of wafer allow near-perfect rectangles to be cleaved, most other commercial semiconductors can be made in the related zinc blende structure, with similar cleavage planes. Cleavage Mineral galleries, Mineral properties – Cleavage
Cleavage (crystal)
–
Green
fluorite with prominent cleavage.
Cleavage (crystal)
–
Biotite with basal cleavage.
11.
Fracture (mineralogy)
–
In the field of mineralogy, fracture is the texture and shape of a rocks surface formed when a mineral is fractured. Minerals often have a highly distinctive fracture, making it a feature used in their identification. Fracture differs from cleavage in that the latter involves clean splitting along the planes of the minerals crystal structure. All minerals exhibit fracture, but when very strong cleavage is present, conchoidal fracture breakage that resembles the concentric ripples of a mussel shell. It often occurs in amorphous or fine-grained minerals such as flint, opal or obsidian, subconchoidal fracture is similar to conchoidal fracture, but with less significant curvature. Earthy fracture is reminiscent of freshly broken soil and it is frequently seen in relatively soft, loosely bound minerals, such as limonite, kaolinite and aluminite. Hackly fracture is jagged, sharp and not even and it occurs when metals are torn, and so is often encountered in native metals such as copper and silver. Splintery fracture comprises sharp elongated points and it is particularly seen in fibrous minerals such as chrysotile, but may also occur in non-fibrous minerals such as kyanite. Uneven fracture is a surface or one with random irregularities. It occurs in a range of minerals including arsenopyrite, pyrite and magnetite. Rudolf Duda and Lubos Rejl, Minerals of the World http, //www. galleries. com/minerals/property/fracture. htm
Fracture (mineralogy)
–
Obsidian
Fracture (mineralogy)
–
Limonite
Fracture (mineralogy)
–
Native copper
Fracture (mineralogy)
–
Chrysotile
12.
Mohs scale of mineral hardness
–
The Mohs scale of mineral hardness is a qualitative ordinal scale characterizing scratch resistance of various minerals through the ability of harder material to scratch softer material. Created in 1812 by German geologist and mineralogist Friedrich Mohs, it is one of several definitions of hardness in materials science, while greatly facilitating the identification of minerals in the field, the Mohs scale does not show how well hard materials perform in an industrial setting. Despite its lack of precision, the Mohs scale is highly relevant for field geologists, the Mohs scale hardness of minerals can be commonly found in reference sheets. Reference materials may be expected to have a uniform Mohs hardness, the Mohs scale of mineral hardness is based on the ability of one natural sample of mineral to scratch another mineral visibly. The samples of matter used by Mohs are all different minerals, Minerals are pure substances found in nature. Rocks are made up of one or more minerals, as the hardest known naturally occurring substance when the scale was designed, diamonds are at the top of the scale. The hardness of a material is measured against the scale by finding the hardest material that the material can scratch. For example, if material is scratched by apatite but not by fluorite. Scratching a material for the purposes of the Mohs scale means creating non-elastic dislocations visible to the naked eye, frequently, materials that are lower on the Mohs scale can create microscopic, non-elastic dislocations on materials that have a higher Mohs number. The Mohs scale is an ordinal scale. For example, corundum is twice as hard as topaz, the table below shows the comparison with the absolute hardness measured by a sclerometer, with pictorial examples. On the Mohs scale, a streak plate has a hardness of 7.0, using these ordinary materials of known hardness can be a simple way to approximate the position of a mineral on the scale. The table below incorporates additional substances that may fall between levels, Comparison between Hardness and Hardness, Mohs hardness of elements is taken from G. V, samsonov in Handbook of the physicochemical properties of the elements, IFI-Plenum, New York, USA,1968. The Hardness of Minerals and Rocks
Mohs scale of mineral hardness
Mohs scale of mineral hardness
Mohs scale of mineral hardness
Mohs scale of mineral hardness
13.
Lustre (mineralogy)
–
Lustre or luster is the way light interacts with the surface of a crystal, rock, or mineral. The word traces its origins back to the latin lux, meaning light, a range of terms are used to describe lustre, such as earthy, metallic, greasy, and silky. Similarly, the term refers to a glassy lustre. A list of terms is given below. Lustre varies over a continuum, and so there are no rigid boundaries between the different types of lustre. The terms are frequently combined to describe types of lustre. Some minerals exhibit unusual optical phenomena, such as asterism or chatoyancy, a list of such phenomena is given below. Adamantine minerals possess a superlative lustre, which is most notably seen in diamond, such minerals are transparent or translucent, and have a high refractive index. Minerals with an adamantine lustre are uncommon, with examples being cerussite. Minerals with a degree of lustre are referred to as subadamantine, with some examples being garnet. Dull minerals exhibit little to no lustre, due to coarse granulations which scatter light in all directions, a distinction is sometimes drawn between dull minerals and earthy minerals, with the latter being coarser, and having even less lustre. Greasy minerals resemble fat or grease, a greasy lustre often occurs in minerals containing a great abundance of microscopic inclusions, with examples including opal and cordierite. Many minerals with a greasy lustre also feel greasy to the touch, metallic minerals have the lustre of polished metal, and with ideal surfaces will work as a reflective surface. Examples include galena, pyrite and magnetite, pearly minerals consist of thin transparent co-planar sheets. Light reflecting from these layers give them a lustre reminiscent of pearls, such minerals possess perfect cleavage, with examples including muscovite and stilbite. Resinous minerals have the appearance of resin, chewing gum or plastic, a principal example is amber, which is a form of fossilized resin. Silky minerals have an arrangement of extremely fine fibres, giving them a lustre reminiscent of silk. Examples include asbestos, ulexite and the satin spar variety of gypsum, a fibrous lustre is similar, but has a coarser texture
Lustre (mineralogy)
–
Cut diamonds.
Lustre (mineralogy)
–
Kaolinite
Lustre (mineralogy)
–
Moss
opal
Lustre (mineralogy)
–
Pyrite
14.
Streak (mineralogy)
–
The streak of a mineral is the color of the powder produced when it is dragged across an un-weathered surface. If no streak seems to be made, the streak is said to be white or colorless. Streak is particularly important as a diagnostic for opaque and colored materials and it is less useful for silicate minerals, most of which have a white streak or are too hard to powder easily. The apparent color of a mineral can vary widely because of impurities or a disturbed macroscopic crystal structure. Small amounts of an impurity that strongly absorbs a particular wavelength can radically change the wavelengths of light that are reflected by the specimen, and thus change the apparent color. However, when the specimen is dragged to produce a streak, it is broken into randomly oriented microscopic crystals, the surface across which the mineral is dragged is called a streak plate, and is generally made of unglazed porcelain tile. In the absence of a plate, the unglazed underside of a porcelain bowl or vase or the back of a glazed tile will work. Sometimes a streak is more easily or accurately described by comparing it with the streak made by another streak plate. Because the trail left behind results from the mineral being crushed into powder, in case of harder minerals, the color of the powder can be determined by filing or crushing with a hammer a small sample, which is then usually rubbed on a streak plate. Most minerals that are harder have a white streak. Some minerals leave a similar to their natural color, such as cinnabar. Other minerals leave surprising colors, such as fluorite, which always has a streak, although it can appear in purple, blue, yellow. Hematite, which is black in appearance, leaves a red streak which accounts for its name, galena, which can be similar in appearance to hematite, is easily distinguished by its gray streak. Hamilton, W. R. Cambridge Guide to Minerals, Rocks, the Encyclopedia of Gemstones and Minerals. New York, Facts on File. p.251, physical Characteristics of Minerals, at Introduction to Mineralogy by Andrea Bangert What is Streak
Streak (mineralogy)
–
Streak plates with
pyrite (left) and
rhodochrosite (right)
15.
Transparency and translucency
–
In the field of optics, transparency is the physical property of allowing light to pass through the material without being scattered. On a macroscopic scale, the photons can be said to follow Snells Law, in other words, a translucent medium allows the transport of light while a transparent medium not only allows the transport of light but allows for image formation. The opposite property of translucency is opacity, transparent materials appear clear, with the overall appearance of one color, or any combination leading up to a brilliant spectrum of every color. When light encounters a material, it can interact with it in different ways. These interactions depend on the wavelength of the light and the nature of the material, photons interact with an object by some combination of reflection, absorption and transmission. Some materials, such as glass and clean water, transmit much of the light that falls on them and reflect little of it. Many liquids and aqueous solutions are highly transparent, absence of structural defects and molecular structure of most liquids are mostly responsible for excellent optical transmission. Materials which do not transmit light are called opaque, many such substances have a chemical composition which includes what are referred to as absorption centers. Many substances are selective in their absorption of light frequencies. They absorb certain portions of the spectrum while reflecting others. The frequencies of the spectrum which are not absorbed are either reflected or transmitted for our physical observation and this is what gives rise to color. The attenuation of light of all frequencies and wavelengths is due to the mechanisms of absorption. Transparency can provide almost perfect camouflage for animals able to achieve it and this is easier in dimly-lit or turbid seawater than in good illumination. Many marine animals such as jellyfish are highly transparent, at the atomic or molecular level, physical absorption in the infrared portion of the spectrum depends on the frequencies of atomic or molecular vibrations or chemical bonds, and on selection rules. Nitrogen and oxygen are not greenhouse gases because there is no absorption because there is no molecular dipole moment. With regard to the scattering of light, the most critical factor is the scale of any or all of these structural features relative to the wavelength of the light being scattered. Primary material considerations include, Crystalline structure, whether or not the atoms or molecules exhibit the long-range order evidenced in crystalline solids, glassy structure, scattering centers include fluctuations in density or composition. Microstructure, scattering centers include internal surfaces such as boundaries, crystallographic defects
Transparency and translucency
–
Dichroic filters are created using optically transparent materials.
Transparency and translucency
–
Translucency of a material being used to highlight the structure of a photographic subject
Transparency and translucency
–
Meiningen Catholic Church, 20th century glass
Transparency and translucency
–
A laser beam bouncing down an
acrylic rod, illustrating the total internal reflection of light in a multimode optical fiber
16.
Specific gravity
–
This page is about the measurement using water as a reference. For a general use of gravity, see relative density. See intensive property for the property implied by specific, Apparent specific gravity is the ratio of the weight of a volume of the substance to the weight of an equal volume of the reference substance. The reference substance is always water at its densest for liquids. Nonetheless, the temperature and pressure must be specified for both the sample and the reference, pressure is nearly always 1 atm. Temperatures for both sample and reference vary from industry to industry, in British beer brewing, the practice for specific gravity as specified above is to multiply it by 1000. Being a ratio of densities, specific gravity is a dimensionless quantity, Specific gravity varies with temperature and pressure, reference and sample must be compared at the same temperature and pressure or be corrected to a standard reference temperature and pressure. Substances with a gravity of 1 are neutrally buoyant in water. Those with SG greater than 1 are denser than water and will, disregarding surface tension effects and those with an SG less than 1 are less dense than water and will float on it. In scientific work, the relationship of mass to volume is expressed directly in terms of the density of the substance under study. It is in industry where specific gravity finds wide application, often for historical reasons. True specific gravity can be expressed mathematically as, S G true = ρ sample ρ H2 O where ρ sample is the density of the sample, the density of water varies with temperature and pressure as does the density of the sample. So it is necessary to specify the temperatures and pressures at which the densities or weights were determined and it is nearly always the case that measurements are made at 1 nominal atmosphere. For true specific gravity calculations, air pressure must be considered, temperatures are specified by the notation with T s representing the temperature at which the samples density was determined and T r the temperature at which the reference density is specified. For example, SG would be understood to mean that the density of the sample was determined at 20°C and of the water at 4°C. Taking into account different sample and reference temperatures, we note that, while S G H2 O =1.000000, it is also the case that S G H2 O =0.998203 /0.999840 =0.998363. Here, temperature is being specified using the current ITS-90 scale, on the previous IPTS-68 scale, the densities at 20 °C and 4 °C are 0.9982071 and 0.9999720 respectively, resulting in an SG value for water of 0.9982343. For example, in the industry, the Plato table lists sucrose concentration by weight against true SG
Specific gravity
–
Testing specific gravity of fuel.
17.
Refractive index
–
In optics, the refractive index or index of refraction n of a material is a dimensionless number that describes how light propagates through that medium. It is defined as n = c v, where c is the speed of light in vacuum, for example, the refractive index of water is 1.333, meaning that light travels 1.333 times faster in a vacuum than it does in water. The refractive index determines how light is bent, or refracted. The refractive indices also determine the amount of light that is reflected when reaching the interface, as well as the angle for total internal reflection. This implies that vacuum has a index of 1. The refractive index varies with the wavelength of light and this is called dispersion and causes the splitting of white light into its constituent colors in prisms and rainbows, and chromatic aberration in lenses. Light propagation in absorbing materials can be described using a refractive index. The imaginary part then handles the attenuation, while the real part accounts for refraction, the concept of refractive index is widely used within the full electromagnetic spectrum, from X-rays to radio waves. It can also be used with wave phenomena such as sound, in this case the speed of sound is used instead of that of light and a reference medium other than vacuum must be chosen. Thomas Young was presumably the person who first used, and invented, at the same time he changed this value of refractive power into a single number, instead of the traditional ratio of two numbers. The ratio had the disadvantage of different appearances, newton, who called it the proportion of the sines of incidence and refraction, wrote it as a ratio of two numbers, like 529 to 396. Hauksbee, who called it the ratio of refraction, wrote it as a ratio with a fixed numerator, hutton wrote it as a ratio with a fixed denominator, like 1.3358 to 1. Young did not use a symbol for the index of refraction, in the next years, others started using different symbols, n, m, and µ. For visible light most transparent media have refractive indices between 1 and 2, a few examples are given in the adjacent table. These values are measured at the yellow doublet D-line of sodium, with a wavelength of 589 nanometers, gases at atmospheric pressure have refractive indices close to 1 because of their low density. Almost all solids and liquids have refractive indices above 1.3, aerogel is a very low density solid that can be produced with refractive index in the range from 1.002 to 1.265. Moissanite lies at the end of the range with a refractive index as high as 2.65. Most plastics have refractive indices in the range from 1.3 to 1.7, for infrared light refractive indices can be considerably higher
Refractive index
–
Thomas Young coined the term index of refraction.
Refractive index
–
A
ray of light being
refracted in a plastic block.
Refractive index
–
Diamonds have a very high refractive index of 2.42.
Refractive index
–
A
split-ring resonator array arranged to produce a negative index of refraction for
microwaves.
18.
Ultraviolet
–
Ultraviolet is an electromagnetic radiation with a wavelength from 10 nm to 400 nm, shorter than that of visible light but longer than X-rays. UV radiation constitutes about 10% of the light output of the Sun. It is also produced by electric arcs and specialized lights, such as lamps, tanning lamps. Consequently, the effects of UV are greater than simple heating effects. Suntan, freckling and sunburn are familiar effects of over-exposure, along with risk of skin cancer. Living things on dry land would be damaged by ultraviolet radiation from the Sun if most of it were not filtered out by the Earths atmosphere. More-energetic, shorter-wavelength extreme UV below 121 nm ionizes air so strongly that it is absorbed before it reaches the ground, Ultraviolet is also responsible for the formation of bone-strengthening vitamin D in most land vertebrates, including humans. The UV spectrum thus has both beneficial and harmful to human health. Ultraviolet rays are invisible to most humans, the lens in a human eye ordinarily filters out UVB frequencies or higher, and humans lack color receptor adaptations for ultraviolet rays. Under some conditions, children and young adults can see ultraviolet down to wavelengths of about 310 nm, near-UV radiation is visible to some insects, mammals, and birds. Small birds have a fourth color receptor for ultraviolet rays, this gives birds true UV vision, reindeer use near-UV radiation to see polar bears, who are poorly visible in regular light because they blend in with the snow. UV also allows mammals to see urine trails, which is helpful for animals to find food in the wild. The males and females of some species look identical to the human eye. Ultraviolet means beyond violet, violet being the color of the highest frequencies of visible light, Ultraviolet has a higher frequency than violet light. He called them oxidizing rays to emphasize chemical reactivity and to them from heat rays. The terms chemical and heat rays were eventually dropped in favour of ultraviolet and infrared radiation, in 1878 the effect of short-wavelength light on sterilizing bacteria was discovered. By 1903 it was known the most effective wavelengths were around 250 nm, in 1960, the effect of ultraviolet radiation on DNA was established. The discovery of the ultraviolet radiation below 200 nm, named vacuum ultraviolet because it is absorbed by air, was made in 1893 by the German physicist Victor Schumann
Ultraviolet
–
(left) Portable ultraviolet lamp. (right) UV light is also produced by
electric arcs.
Arc welders must wear
eye protection to prevent
welder's flash.
Ultraviolet
Ultraviolet
–
Two black light fluorescent tubes, showing use. The longer tube is a F15T8/BLB 18 inch, 15 watt tube, shown in the bottom image in a standard plug-in fluorescent fixture. The shorter is an F8T5/BLB 12 inch, 8 watt tube, used in a portable battery-powered black light sold as a pet urine detector.
Ultraviolet
19.
Fluorescence
–
Fluorescence is the emission of light by a substance that has absorbed light or other electromagnetic radiation. It is a form of luminescence, in most cases, the emitted light has a longer wavelength, and therefore lower energy, than the absorbed radiation. Fluorescent materials cease to glow immediately when the radiation source stops, unlike phosphorescence, Fluorescence also occurs frequently in nature in some minerals and in various biological states in many branches of the animal kingdom. An early observation of fluorescence was described in 1560 by Bernardino de Sahagún and it was derived from the wood of two tree species, Pterocarpus indicus and Eysenhardtia polystachya. The chemical compound responsible for this fluorescence is matlaline, which is the product of one of the flavonoids found in this wood. The name was derived from the fluorite, some examples of which contain traces of divalent europium. In a key experiment he used a prism to isolate ultraviolet radiation from sunlight, the specific frequencies of exciting and emitted light are dependent on the particular system. S0 is called the state of the fluorophore, and S1 is its first excited singlet state. A molecule in S1 can relax by various competing pathways and it can undergo non-radiative relaxation in which the excitation energy is dissipated as heat to the solvent. Excited organic molecules can also relax via conversion to a triplet state, relaxation from S1 can also occur through interaction with a second molecule through fluorescence quenching. Molecular oxygen is an extremely efficient quencher of fluorescence just because of its unusual triplet ground state, in most cases, the emitted light has a longer wavelength, and therefore lower energy, than the absorbed radiation, this phenomenon is known as the Stokes shift. The emitted radiation may also be of the wavelength as the absorbed radiation. Molecules that are excited through light absorption or via a different process can transfer energy to a second sensitized molecule, the fluorescence quantum yield gives the efficiency of the fluorescence process. It is defined as the ratio of the number of photons emitted to the number of photons absorbed, Φ = Number of photons emitted Number of photons absorbed The maximum fluorescence quantum yield is 1.0, each photon absorbed results in a photon emitted. Compounds with quantum yields of 0.10 are still considered quite fluorescent, thus, if the rate of any pathway changes, both the excited state lifetime and the fluorescence quantum yield will be affected. Fluorescence quantum yields are measured by comparison to a standard, the quinine salt quinine sulfate in a sulfuric acid solution is a common fluorescence standard. The fluorescence lifetime refers to the time the molecule stays in its excited state before emitting a photon. This is an instance of exponential decay, various radiative and non-radiative processes can de-populate the excited state
Fluorescence
–
Fluorescent minerals emit visible light when exposed to
ultraviolet light
Fluorescence
–
Lignum nephriticum cup made from the wood of the narra tree (
Pterocarpus indicus), and a flask containing its fluorescent
solution
Fluorescence
–
Matlaline, the fluorescent substance in the wood of the tree Eysenhardtia polystachya
Fluorescence
–
Aequoria victoria, biofluorescent jellyfish known for GFP.
20.
Phosphorescence
–
Phosphorescence is a type of photoluminescence related to fluorescence. Unlike fluorescence, phosphorescent material does not immediately re-emit the radiation it absorbs, the slower time scales of the re-emission are associated with forbidden energy state transitions in quantum mechanics. As these transitions occur very slowly in certain materials, absorbed radiation is re-emitted at an intensity for up to several hours after the original excitation. Typically, the glow slowly fades out, sometimes within a few minutes or up to a few hours in a dark room, the study of phosphorescent materials led to the discovery of radioactivity in 1896. In simple terms, phosphorescence is a process in which energy absorbed by a substance is released relatively slowly in the form of light and this is in some cases the mechanism used for glow-in-the-dark materials which are charged by exposure to light. Most photoluminescent events, in which a chemical substrate absorbs and then re-emits a photon of light, are fast, light is absorbed and emitted at these fast time scales in cases where the energy of the photons involved matches the available energy states and allowed transitions of the substrate. In the special case of phosphorescence, the photon energy undergoes an unusual intersystem crossing into an energy state of higher spin multiplicity. As a result, the energy can become trapped in the state with only forbidden transitions available to return to the lower energy state. These transitions, although forbidden, will occur in quantum mechanics but are kinetically unfavored. Most phosphorescent compounds are relatively fast emitters, with triplet lifetimes on the order of milliseconds. However, some compounds have triplet lifetimes up to minutes or even hours, if the phosphorescent quantum yield is high, these substances will release significant amounts of light over long time scales, creating so-called glow-in-the-dark materials. S0 + h ν → S1 → T1 → S0 + h ν ′ where S is a singlet, transitions can also occur to higher energy levels, but the first excited state is denoted for simplicity. Some examples of glow-in-the-dark materials do not glow by phosphorescence, for example, glow sticks glow due to a chemiluminescent process which is commonly mistaken for phosphorescence. In chemiluminescence, a state is created via a chemical reaction. The light emission tracks the progress of the underlying chemical reaction. The excited state will then transfer to a dye molecule, also known as a sensitizer or fluorophor, common pigments used in phosphorescent materials include zinc sulfide and strontium aluminate. Use of zinc sulfide for safety related products dates back to the 1930s, however, the development of strontium aluminate, with a luminance approximately 10 times greater than zinc sulfide, has relegated most zinc sulfide based products to the novelty category. Strontium aluminate based pigments are now used in signs, pathway marking
Phosphorescence
–
Phosphorescent, Europium-doped strontium silicate-aluminate oxide powder under visible light, long-wave UV light, and in total darkness
Phosphorescence
Phosphorescence
–
An extremely intense pulse of UV light in a
flashtube produced this blue phosphorescence in the
fused silica envelope.
Phosphorescence
–
Phosphorescence of the quartz ignition tube of an
air-gap flash
21.
Photochromism
–
Photochromism is the reversible transformation of a chemical species between two forms by the absorption of electromagnetic radiation, where the two forms have different absorption spectra. Trivially, this can be described as a change of colour upon exposure to light. The phenomenon was discovered in the late 1880s, including work by Markwald and he labeled this phenomenon phototropy, and this name was used until the 1950s when Yehuda Hirshberg, of the Weizmann Institute of Science in Israel proposed the term photochromism. Photochromism can take place in organic and inorganic compounds, and also has its place in biological systems. In many cases, a band is present in only one form. Therefore, while the trans-cis isomerization of azobenzene is considered a photochromic reaction, since photochromism is just a special case of a photochemical reaction, almost any photochemical reaction type may be used to produce photochromism with appropriate molecular design. Another requirement of photochromism is two states of the molecule should be stable under ambient conditions for a reasonable time. All the same, nitrospiropyran is considered photochromic, all photochromic molecules back-isomerize to their more stable form at some rate, and this back-isomerization is accelerated by heating. There is therefore a close relationship between photochromic and thermochromic compounds, the timescale of thermal back-isomerization is important for applications, and may be molecularly engineered. Photochromic compounds considered to be thermally stable include some diarylethenes, which do not back isomerize even after heating at 80 C for 3 months, in particular, the tuning of absorbance bands to particular parts of the spectrum and the engineering of thermal stability have received much attention. Apart from the already mentioned, several other properties of photochromics are important for their use. These include Quantum yield of the photochemical reaction and this determined the efficiency of the photochromic change with respect to the amount of light absorbed. The quantum yield of isomerization can be dependent on conditions. In photochromic materials, fatigue refers to the loss of reversibility by processes such as photodegradation, photobleaching, photooxidation, all photochromics suffer fatigue to some extent, and its rate is strongly dependent on the activating light and the conditions of the sample. Photochromic materials have two states, and their interconversion can be controlled using different wavelengths of light, excitation with any given wavelength of light will result in a mixture of the two states at a particular ratio, called the photostationary state. In order to incorporate photochromics in working systems, they suffer the same issues as other dyes and they are often charged in one or more state, leading to very high polarity and possible large changes in polarity. They also often contain large conjugated systems that limit their solubility, a photochromic complex is a kind of chemical compound that has photoresponsive parts on its ligand. These complexes have a structure, photoswitchable organic compounds are attached to metal complexes
Photochromism
–
A
photochromic eyeglass lens, after exposure to sunlight while part of the lens remained covered by paper.
22.
Solubility
–
Solubility is the property of a solid, liquid, or gaseous chemical substance called solute to dissolve in a solid, liquid, or gaseous solvent. The solubility of a substance depends on the physical and chemical properties of the solute and solvent as well as on temperature, pressure. The solubility of a substance is a different property from the rate of solution. Most often, the solvent is a liquid, which can be a substance or a mixture. One may also speak of solid solution, but rarely of solution in a gas, the extent of solubility ranges widely, from infinitely soluble such as ethanol in water, to poorly soluble, such as silver chloride in water. The term insoluble is often applied to poorly or very poorly soluble compounds, a common threshold to describe something as insoluble is less than 0.1 g per 100 mL of solvent. Under certain conditions, the solubility can be exceeded to give a so-called supersaturated solution. Metastability of crystals can also lead to apparent differences in the amount of a chemical that dissolves depending on its form or particle size. A supersaturated solution generally crystallises when seed crystals are introduced and rapid equilibration occurs, phenylsalicylate is one such simple observable substance when fully melted and then cooled below its fusion point. Solubility is not to be confused with the ability to dissolve a substance, for example, zinc dissolves in hydrochloric acid as a result of a chemical reaction releasing hydrogen gas in a displacement reaction. The zinc ions are soluble in the acid, the smaller a particle is, the faster it dissolves although there are many factors to add to this generalization. Crucially solubility applies to all areas of chemistry, geochemistry, inorganic, physical, organic, in all cases it will depend on the physical conditions and the enthalpy and entropy directly relating to the solvents and solutes concerned. By far the most common solvent in chemistry is water which is a solvent for most ionic compounds as well as a range of organic substances. This is a factor in acidity/alkalinity and much environmental and geochemical work. According to the IUPAC definition, solubility is the composition of a saturated solution expressed as a proportion of a designated solute in a designated solvent. Solubility may be stated in units of concentration such as molarity, molality, mole fraction, mole ratio, mass per volume. Solubility occurs under dynamic equilibrium, which means that solubility results from the simultaneous and opposing processes of dissolution, the solubility equilibrium occurs when the two processes proceed at a constant rate. The term solubility is used in some fields where the solute is altered by solvolysis
Solubility
–
Diving medicine:
Solubility
–
"Soluble" redirects here. For the algebraic object called a "soluble group", see
Solvable group.
23.
Hydrochloric acid
–
Hydrochloric acid is a corrosive, strong mineral acid with many industrial uses. A colorless, highly pungent solution of chloride in water. Free hydrochloric acid was first formally described in the 16th century by Libavius, later, it was used by chemists such as Glauber, Priestley, and Davy in their scientific research. It has numerous applications, including household cleaning, production of gelatin and other food additives, descaling. About 20 million tonnes of acid are produced worldwide annually. It is also found naturally in gastric acid, Hydrochloric acid was known to European alchemists as spirits of salt or acidum salis. Both names are used, especially in other languages, such as German, Salzsäure, Dutch, Zoutzuur, Swedish, Saltsyra, Turkish, Tuz Ruhu, Polish, kwas solny and Chinese. Gaseous HCl was called marine acid air, the old name muriatic acid has the same origin, and this name is still sometimes used. The name hydrochloric acid was coined by the French chemist Joseph Louis Gay-Lussac in 1814, aqua regia, a mixture consisting of hydrochloric and nitric acids, prepared by dissolving sal ammoniac in nitric acid, was described in the works of Pseudo-Geber, a 13th-century European alchemist. Other references suggest that the first mention of aqua regia is in Byzantine manuscripts dating to the end of the 13th century, free hydrochloric acid was first formally described in the 16th century by Libavius, who prepared it by heating salt in clay crucibles. Joseph Priestley of Leeds, England prepared pure hydrogen chloride in 1772, during the Industrial Revolution in Europe, demand for alkaline substances increased. A new industrial process developed by Nicolas Leblanc of Issoundun, France enabled cheap large-scale production of sodium carbonate, in this Leblanc process, common salt is converted to soda ash, using sulfuric acid, limestone, and coal, releasing hydrogen chloride as a by-product. Until the British Alkali Act 1863 and similar legislation in other countries, after the passage of the act, soda ash producers were obliged to absorb the waste gas in water, producing hydrochloric acid on an industrial scale. In the 20th century, the Leblanc process was replaced by the Solvay process without a hydrochloric acid by-product. Since hydrochloric acid was already settled as an important chemical in numerous applications. After the year 2000, hydrochloric acid is made by absorbing by-product hydrogen chloride from industrial organic compounds production. Hydrochloric acid is the salt of hydronium ion, H3O+ and chloride and it is usually prepared by treating HCl with water. H C l + H2 O ⟶ H3 O + + C l − Hydrochloric acid can therefore be used to prepare salts called chlorides, Hydrochloric acid is a strong acid, since it is completely dissociated in water
Hydrochloric acid
–
Hydrochloric acid
24.
Mineral
–
A mineral is a naturally occurring chemical compound, usually of crystalline form and abiogenic in origin. A mineral has one specific chemical composition, whereas a rock can be an aggregate of different minerals or mineraloids, the study of minerals is called mineralogy. There are over 5,300 known mineral species, over 5,070 of these have been approved by the International Mineralogical Association, the silicate minerals compose over 90% of the Earths crust. The diversity and abundance of species is controlled by the Earths chemistry. Silicon and oxygen constitute approximately 75% of the Earths crust, which translates directly into the predominance of silicate minerals, minerals are distinguished by various chemical and physical properties. Differences in chemical composition and crystal structure distinguish the various species, changes in the temperature, pressure, or bulk composition of a rock mass cause changes in its minerals. Minerals can be described by their various properties, which are related to their chemical structure. Common distinguishing characteristics include crystal structure and habit, hardness, lustre, diaphaneity, colour, streak, tenacity, cleavage, fracture, parting, more specific tests for describing minerals include magnetism, taste or smell, radioactivity and reaction to acid. Minerals are classified by key chemical constituents, the two dominant systems are the Dana classification and the Strunz classification, the silicate class of minerals is subdivided into six subclasses by the degree of polymerization in the chemical structure. All silicate minerals have a unit of a 4− silica tetrahedron—that is, a silicon cation coordinated by four oxygen anions. These tetrahedra can be polymerized to give the subclasses, orthosilicates, disilicates, cyclosilicates, inosilicates, phyllosilicates, other important mineral groups include the native elements, sulfides, oxides, halides, carbonates, sulfates, and phosphates. The first criterion means that a mineral has to form by a natural process, stability at room temperature, in the simplest sense, is synonymous to the mineral being solid. More specifically, a compound has to be stable or metastable at 25 °C, modern advances have included extensive study of liquid crystals, which also extensively involve mineralogy. Minerals are chemical compounds, and as such they can be described by fixed or a variable formula, many mineral groups and species are composed of a solid solution, pure substances are not usually found because of contamination or chemical substitution. Finally, the requirement of an ordered atomic arrangement is usually synonymous with crystallinity, however, crystals are also periodic, an ordered atomic arrangement gives rise to a variety of macroscopic physical properties, such as crystal form, hardness, and cleavage. There have been recent proposals to amend the definition to consider biogenic or amorphous substances as minerals. The formal definition of an approved by the IMA in 1995, A mineral is an element or chemical compound that is normally crystalline. However, if geological processes were involved in the genesis of the compound, Mineral classification schemes and their definitions are evolving to match recent advances in mineral science
Mineral
–
Amethyst, a variety of
quartz
Mineral
–
Schist is a
metamorphic rock characterized by an abundance of platy minerals. In this example, the rock has prominent
sillimanite porphyroblasts as large as 3 cm (1.2 in).
Mineral
–
Hübnerite, the manganese-rich end-member of the
wolframite series, with minor quartz in the background
Mineral
–
When minerals react, the products will sometimes assume the shape of the reagent; the product mineral is termed to be a pseudomorph of (or after) the reagent. Illustrated here is a pseudomorph of
kaolinite after
orthoclase. Here, the pseudomorph preserved the Carlsbad
twinning common in orthoclase.
25.
Gemstone
–
A gemstone is a piece of mineral crystal which, in cut and polished form, is used to make jewelry or other adornments. However, certain rocks or organic materials that are not minerals are used for jewelry and are therefore often considered to be gemstones as well. Most gemstones are hard, but some soft minerals are used in jewelry because of their luster or other properties that have aesthetic value. Rarity is another characteristic that lends value to a gemstone, apart from jewelry, from earliest antiquity engraved gems and hardstone carvings, such as cups, were major luxury art forms. A gem maker is called a lapidary or gemcutter, a worker is a diamantaire. The carvings of Carl Fabergé are significant works in this tradition, the traditional classification in the West, which goes back to the ancient Greeks, begins with a distinction between precious and semi-precious, similar distinctions are made in other cultures. In modern usage the precious stones are diamond, ruby, sapphire, other stones are classified by their color, translucency and hardness. Another unscientific term for semi-precious gemstones used in art history and archaeology is hardstone, in modern times gemstones are identified by gemologists, who describe gems and their characteristics using technical terminology specific to the field of gemology. The first characteristic a gemologist uses to identify a gemstone is its chemical composition, for example, diamonds are made of carbon and rubies of aluminium oxide. Next, many gems are crystals which are classified by their crystal system such as cubic or trigonal or monoclinic, another term used is habit, the form the gem is usually found in. For example, diamonds, which have a crystal system, are often found as octahedrons. Gemstones are classified into different groups, species, and varieties, for example, ruby is the red variety of the species corundum, while any other color of corundum is considered sapphire. Other examples are the Emerald, aquamarine, red beryl, goshenite, heliodor, and morganite, gems are characterized in terms of refractive index, dispersion, specific gravity, hardness, cleavage, fracture, and luster. They may exhibit pleochroism or double refraction and they may have luminescence and a distinctive absorption spectrum. Material or flaws within a stone may be present as inclusions, gemstones may also be classified in terms of their water. This is a grading of the gems luster, transparency. Very transparent gems are considered first water, while second or third water gems are those of a lesser transparency, there is no universally accepted grading system for gemstones. Diamonds are graded using a system developed by the Gemological Institute of America in the early 1950s, historically, all gemstones were graded using the naked eye
Gemstone
–
A selection of gemstone pebbles made by tumbling rough rock with abrasive grit, in a rotating drum. The biggest pebble here is 40 mm long (1.6 inches).
Gemstone
–
Group of precious and semiprecious stones —both uncut and faceted— including (clockwise from top left)
diamond, uncut synthetic
sapphire,
ruby, uncut
emerald, and
amethyst crystal cluster.
Gemstone
–
Spanish emerald and gold pendant at
Victoria and Albert Museum
Gemstone
–
Enamelled gold, amethyst and pearl pendant, about 1880, Pasquale Novissimo (1844–1914), V&A Museum number M.36-1928
26.
Hauyne
–
Hauyne, haüyne, hauynite or haüynite is a tectosilicate mineral with sulfate, with endmember formula Na3CaO12. As much as 5 wt % K2O may be present, and also H2O and it is a feldspathoid and a member of the sodalite group. Hauyne was first described in 1807 from samples discovered in Vesuvian lavas in Monte Somma, Italy and it is sometimes used as a gemstone. Formulae, sodalite Na4O12Cl nosean Na8O24. H2O lazurite Na3CaO12S tsaregorodtsevite N4Si4O12 tugtupite Na4BeAlSi4O12Cl vladimirivanovite Na Na6Ca22·H2O All these minerals are feldspathoids, Haüyne forms a solid solution with nosean and with sodalite. Complete solid solution exists between synthetic nosean and haüyne at 600 °C, but only limited solid solution occurs in the sodalite-nosean, Haüyne belongs to the hexatetrahedral class of the isometric system, 43m, space group P43n. It has one unit per unit cell, which is a cube with side length of 9 Å. In tectosilicates each oxygen ion is shared between two tetrahedra, linking all the tetrahedra together to form a framework. Since each O is shared between two tetrahedra only half of it belongs to the Si ion in either tetrahedron, and if no other components are present then the formula is SiO2, as in quartz. Aluminium ions Al, however, can substitute for some of the silicon ions, if the substitution is random the ions are said to be disordered, but in haüyne the Al and Si in the tetrahedral framework are fully ordered. Si has a charge 4+, but the charge on Al is only 3+, if all the cations are Si then the positive charges on the Sis exactly balance the negative charges on the Os. When Al replaces Si there is a deficiency of positive charge, in haüyne these extra cations are sodium Na+ and calcium Ca2+, and in addition the negatively charged sulfate group 2− is also present. In the haüyne structure the tetrahedra are linked to form six-membered rings which are stacked up in an. ABCABC, sequence along one direction, and rings of four tetrahedra are stacked up parallel to another direction. The resulting arrangement forms continuous channels that can accommodate a variety of cations and anions. Haüyne crystallizes in the isometric system forming rare dodecahedral or pseudo-octahedral crystals that may reach 3 cm across, the crystals are transparent to translucent, with a vitreous to greasy luster. The color is bright blue, but it can also be white, grey, yellow, green. In thin section the crystals are colorless or pale blue, truly isotropic minerals have no birefringence, but haüyne is weakly birefringent when it contains inclusions. Although this is low, similar to that of ordinary window glass. It may show reddish orange to purplish pink fluorescence under ultraviolet light
Hauyne
–
Haüyne on
augite, Somma-Vesuvius Complex,
Naples Province Italy
Hauyne
–
Hauyne,
Mayen, Eifel Mts,
Rhineland-Palatinate, Germany.
27.
Nosean
–
Nosean, also known as Noselite, is a mineral of the feldspathoid group with formula, Na8Al6Si6O24. It forms isometric crystals of variable color, white, grey, blue, green and it has a Mohs hardness of 5.5 to 6 and a specific gravity of 2.3 to 2.4. It is found in low silica igneous rocks, there is a solid solution between nosean and hauyne, which contains calcium. It was first described in 1815 from the Rhineland in Germany, the mineral is rare but widespread, found in such diverse localities as ocean islands and the La Sal Range in Utah
Nosean
–
Nosean crystal group from Ochtendung, Eifel, Germany
28.
Lazurite
–
Lazurite is a tectosilicate mineral with sulfate, sulfur and chloride with formula,8. It is a feldspathoid and a member of the sodalite group, lazurite crystallizes in the isometric system although well formed crystals are rare. It is usually massive and forms the bulk of the lapis lazuli. Lazurite is a blue to greenish blue. The colour is due to the presence of S−3 anions and it has a Mohs hardness of 5.0 to 5.5 and a specific gravity of 2.4. It is translucent with an index of 1.50. It is fusible at 3.5 and soluble in HCl and it commonly contains or is associated with grains of pyrite. Lazurite is a product of metamorphism of limestone and typically is associated with calcite, pyrite, diopside, humite, forsterite, hauyne. Other blue minerals such as the carbonate azurite and the phosphate lazulite may be confused with lazurite, lazurite at one time was used as a synonym for azurite. Lazurite was first described in 1890 for an occurrence in the Sar-e-Sang District, Koksha Valley, Badakhshan Province and it has been mined for over 6,000 years in the lapis lazuli district of Badakhshan, Afghanistan. It has been used as a pigment in painting and cloth dyeing since at least the sixth or seventh century CE and it is also mined at Lake Baikal in Siberia, Mount Vesuvius, Burma, Canada, and the United States. The name is from the Persian lazward for blue, lazurite and hauyne seem to have the same structure and both are sulfate-dominant minerals. Lazurite is a pigment and has a blue streak. Many hauynes have a pale blue streak and are translucent. The difference might be a consequence of the redox state
Lazurite
–
Lazurite, Ladjuar Medam (Lajur Madan; Lapis-lazuli Mine), Sar-e-Sang District, Koksha Valley (Kokscha; Kokcha), Badakhshan (Badakshan; Badahsan) Province, Afghanistan
29.
Tugtupite
–
Tugtupite is a beryllium aluminium tectosilicate. It also contains sodium and chlorine and has the formula Na4AlBeSi4O12Cl, tugtupite is a member of the silica deficient feldspathoid mineral group. It occurs in alkali intrusive igneous rocks. Tugtupite is tenebrescent, sharing much of its structure with sodalite. Tugtupite occurs as vitreous, transparent to translucent masses of tetragonal crystals and is found in white, pink, to crimson. It has a Mohs hardness of 4 and a gravity of 2.36. It fluoresces crimson under ultraviolet radiation and it was first found in 1962 at Tugtup agtakôrfia Ilimaussaq intrusive complex of southwest Greenland. The U. S. Geological Survey reports that in Nepal and it is used as a gemstone
Tugtupite
–
Tugtupite, quartz
