1.
Canton of Aargau
–
The canton of Aargau is one of the more northerly cantons of Switzerland. It is situated by the course of the Aare, which is why the canton is called Aar-gau. It is one of the most densely populated regions of Switzerland, the Romans built a major settlement called Vindonissa, near the present location of Brugg. In early medieval times, the Aargau was a border region between the duchies of Alamannia and Burgundy. A line of the von Wetterau intermittently held the countship of Aargau from 750 until about 1030, from the extinction in 1254 of the Hohenstaufen dynasty until 1415, the area was ruled by the Habsburgs, and many castles from that time still stand. The Habsburgs founded a number of monasteries, the closing of which by the government in 1841 was a factor to the outbreak of the Swiss civil war – the Sonderbund War – in 1847. When Frederick IV of Habsburg sided with Antipope John XXIII at the Council of Constance, in July 1414, the Pope visited Bern and received assurances from them, that they would move against the Habsburgs. A few months later the Swiss Confederation denounced the Treaty of 1412, shortly thereafter in 1415, Bern and the rest of the Swiss Confederation used the ban as a pretext to invade the Aargau. The Confederation was able to conquer the towns of Aarau, Lenzburg, Brugg. Bern kept the southwest portion, northward to the confluence of the Aare, the important city of Baden was taken by a united Swiss army and governed by all 8 members of the Confederation. Some districts, named the Freie Ämter – Mellingen, Muri, Villmergen, shortly after the conquest of the Aargau by the Swiss, Frederick humbled himself to the Pope. The Pope reconciled with him and ordered all of the lands to be returned. The Swiss refused and years later after no serious attempts at re-acquisition, berns portion of the Aargau came to be known as the Unteraargau, though can also be called the Berner or Bernese Aargau. In 1514 Bern expanded north into the Jura and so came into possession of several strategically important mountain passes into the Austrian Fricktal and this land was added to the Unteraargau and was directly ruled from Bern. It was divided into seven rural bailiwicks and four cities, Aarau, Zofingen, Lenzburg. While the Habsburgs were driven out, many of their nobles were allowed to keep their lands and offices. The bailiwick administration was based on a small staff of officials, mostly made up of Bernese citizens. When Bern converted during the Protestant Reformation in 1528, the Unteraargau also converted, at the beginning of the 16th century a number of anabaptists migrated into the upper Wynen and Rueder valleys from Zürich
2.
Switzerland
–
Switzerland, officially the Swiss Confederation, is a federal republic in Europe. It consists of 26 cantons, and the city of Bern is the seat of the federal authorities. The country is situated in western-Central Europe, and is bordered by Italy to the south, France to the west, Germany to the north, and Austria and Liechtenstein to the east. Switzerland is a country geographically divided between the Alps, the Swiss Plateau and the Jura, spanning an area of 41,285 km2. The establishment of the Old Swiss Confederacy dates to the medieval period, resulting from a series of military successes against Austria. Swiss independence from the Holy Roman Empire was formally recognized in the Peace of Westphalia in 1648. The country has a history of armed neutrality going back to the Reformation, it has not been in a state of war internationally since 1815, nevertheless, it pursues an active foreign policy and is frequently involved in peace-building processes around the world. In addition to being the birthplace of the Red Cross, Switzerland is home to international organisations. On the European level, it is a member of the European Free Trade Association. However, it participates in the Schengen Area and the European Single Market through bilateral treaties, spanning the intersection of Germanic and Romance Europe, Switzerland comprises four main linguistic and cultural regions, German, French, Italian and Romansh. Due to its diversity, Switzerland is known by a variety of native names, Schweiz, Suisse, Svizzera. On coins and stamps, Latin is used instead of the four living languages, Switzerland is one of the most developed countries in the world, with the highest nominal wealth per adult and the eighth-highest per capita gross domestic product according to the IMF. Zürich and Geneva have each been ranked among the top cities in the world in terms of quality of life, with the former ranked second globally, according to Mercer. The English name Switzerland is a compound containing Switzer, a term for the Swiss. The English adjective Swiss is a loan from French Suisse, also in use since the 16th century. The name Switzer is from the Alemannic Schwiizer, in origin an inhabitant of Schwyz and its associated territory, the Swiss began to adopt the name for themselves after the Swabian War of 1499, used alongside the term for Confederates, Eidgenossen, used since the 14th century. The data code for Switzerland, CH, is derived from Latin Confoederatio Helvetica. The toponym Schwyz itself was first attested in 972, as Old High German Suittes, ultimately related to swedan ‘to burn’
3.
Track gauge
–
In rail transport, track gauge is the spacing of the rails on a railway track and is measured between the inner faces of the load-bearing rails. All vehicles on a network must have running gear that is compatible with the track gauge, as the dominant parameter determining interoperability, it is still frequently used as a descriptor of a route or network. There is a distinction between the gauge and actual gauge at some locality, due to divergence of track components from the nominal. Railway engineers use a device, like a caliper, to measure the actual gauge, the nominal track gauge is the distance between the inner faces of the rails. In current practice, it is specified at a distance below the rail head as the inner faces of the rail head are not necessarily vertical. In some cases in the earliest days of railways, the company saw itself as an infrastructure provider only. Colloquially the wagons might be referred to as four-foot gauge wagons, say and this nominal value does not equate to the flange spacing, as some freedom is allowed for. An infrastructure manager might specify new or replacement track components at a variation from the nominal gauge for pragmatic reasons. Track is defined in old Imperial units or in universally accepted metric units or SI units, Imperial units were established in United Kingdom by The Weights and Measures Act of 1824. In addition, there are constraints, such as the load-carrying capacity of axles. Narrow gauge railways usually cost less to build because they are lighter in construction, using smaller cars and locomotives, as well as smaller bridges, smaller tunnels. Narrow gauge is often used in mountainous terrain, where the savings in civil engineering work can be substantial. Broader gauge railways are generally expensive to build and require wider curves. There is no single perfect gauge, because different environments and economic considerations come into play, a narrow gauge is superior if ones main considerations are economy and tight curvature. For direct, unimpeded routes with high traffic, a broad gauge may be preferable, the Standard, Russian, and 46 gauges are designed to strike a reasonable balance between these factors. In addition to the general trade-off, another important factor is standardization, once a standard has been chosen, and equipment, infrastructure, and training calibrated to that standard, conversion becomes difficult and expensive. This also makes it easier to adopt an existing standard than to invent a new one and this is true of many technologies, including railroad gauges. The reduced cost, greater efficiency, and greater economic opportunity offered by the use of a common standard explains why a number of gauges predominate worldwide
4.
Minimum railway curve radius
–
The minimum railway curve radius is the shortest allowable design radius for railway tracks under a particular set of conditions. It has an important bearing on costs and operating costs and, in combination with superelevation in the case of train tracks. Minimum radius of curve is one parameter in the design of vehicles as well as trams. Monorails and guideways are also subject to minimum radii, the first proper railway was the Liverpool and Manchester Railway which opened in 1830. Like the trams that had preceded it over a hundred years, among other reasons for the gentle curves were the lack of strength of the track, which might have overturned if the curves were too sharp causing derailments. There was no signalling at this time, so drivers had to be able to see ahead to avoid collisions with previous trains, the gentler the curves, the longer the visibility. The earliest rails were made in lengths of wrought iron. Minimum curve radii for railroads are governed by the speed operated, for handling of long freight trains, a minimum 717-foot radius is preferred. The sharpest curves tend to be on the narrowest of narrow gauge railways, as the need for more powerful locomotives grew, the need for more driving wheels on a longer, fixed wheelbase grew too. But long wheel bases are unfriendly to sharp curves, various types of articulated locomotives were devised to avoid having to operate multiple locomotives with multiple crews. More recent diesel and electric locomotives do not have a wheelbase problem and this is particularly true of the European buffer and chain couplers, where the buffers extend the profile of the railcar body. For a line with maximum speed 60 km/h, buffer-and-chain couplings reduce the radius to around 200 m. A long heavy freight train, especially those with wagons of mixed loading, may struggle on sharp curves, common solutions include, marshalling light and empty wagons at rear of train intermediate locomotives, including remotely controlled ones. Easing curves reduced speeds reduced cant, at the expense of fast passenger trains, equalizing wagon loading better driver training driving controls that display drawgear forces. And c2013 Electronically Controlled Pneumatic brakes, a similar problem occurs with harsh changes in gradients. To counter this, a cant is used, ideally the train should be tilted such that resultant force acts straight down through the bottom of the train, so the wheels, track, train and passengers feel little or no sideways force. Some trains are capable of tilting to enhance this effect for passenger comfort, because freight and passenger trains tend to move at different speeds and weigh dramatically different, a cant cannot be ideal for both types of rail traffic. The relationship between speed and tilt can be calculated mathematically, the values used when building high-speed railways vary, and depend on desired wear and safety levels
5.
Railway electrification system
–
A railway electrification system supplies electric power to railway trains and trams without an on-board prime mover or local fuel supply. Electrification has many advantages but requires significant capital expenditure, selection of an electrification system is based on economics of energy supply, maintenance, and capital cost compared to the revenue obtained for freight and passenger traffic. Different systems are used for urban and intercity areas, some electric locomotives can switch to different supply voltages to allow flexibility in operation, Electric railways use electric locomotives to haul passengers or freight in separate cars or electric multiple units, passenger cars with their own motors. Electricity is typically generated in large and relatively efficient generating stations, transmitted to the railway network, some electric railways have their own dedicated generating stations and transmission lines but most purchase power from an electric utility. The railway usually provides its own lines, switches and transformers. Power is supplied to moving trains with a continuous conductor running along the track usually takes one of two forms. The first is a line or catenary wire suspended from poles or towers along the track or from structure or tunnel ceilings. Locomotives or multiple units pick up power from the wire with pantographs on their roofs that press a conductive strip against it with a spring or air pressure. Examples are described later in this article, the second is a third rail mounted at track level and contacted by a sliding pickup shoe. Both overhead wire and third-rail systems usually use the rails as the return conductor. In comparison to the alternative, the diesel engine, electric railways offer substantially better energy efficiency, lower emissions. Electric locomotives are usually quieter, more powerful, and more responsive and they have no local emissions, an important advantage in tunnels and urban areas. Different regions may use different supply voltages and frequencies, complicating through service, the limited clearances available under catenaries may preclude efficient double-stack container service. Possible lethal electric current due to risk of contact with high-voltage contact wires, overhead wires are safer than third rails, but they are often considered unsightly. These are independent of the system used, so that. The permissible range of voltages allowed for the voltages is as stated in standards BS EN50163. These take into account the number of trains drawing current and their distance from the substation, railways must operate at variable speeds. Until the mid 1980s this was only practical with the brush-type DC motor, since such conversion was not well developed in the late 19th century and early 20th century, most early electrified railways used DC and many still do, particularly rapid transit and trams
6.
Direct current
–
Direct current is a flow of electrical charge carriers that always takes place in the same direction. The current need not always have the magnitude, but if it is to be defined as dc. This contrasts with alternating current which varies the direction of flow, sources of direct current include power supplies, electrochemical cells and batteries, and photovoltaic cells and panels. The intensity, or amplitude, of a direct current might fluctuate with time, in some such cases the dc has an ac component superimposed on it. An example of this is the output of a cell that receives a modulated light communications signal. A source of dc is sometimes called a dc generator, batteries and various other sources of dc produce a constant voltage. This is called pure dc and can be represented by a straight, the peak and effective values are the same. The peak to peak value is zero because the instantaneous amplitude never changes, in some instances the value of a dc voltage pulsates or oscillates rapidly with time, in a manner similar to the changes in an ac wave. The unfiltered output of a wave or a full wave rectifier. In 1820, Hans Christian Orsted discovered that electrical current creates a magnetic field and this discovery made scientists relate magnetism to the electric phenomena. In 1879, Thomas Edison invented the light bulb. He improved a 50-year-old idea using lower current electricity, a vacuum inside the globe and a small carbonized filament. At that time, the idea of lightning was not new. Edison not only invented an incandescent electric light, but an electric lighting system contained all the necessary elements to make the incandescent light safe, economical. Prior to 1879, direct current electricity had been used in lighting for the outdoors and it was in the 1880s when the modern electric utility industry began. It was an evolution from street lighting systems and from gas and it was located in Lower Manhattan, on Pearl Street. This station provided light and electricity to customers in a one square mile range, the station was called Thomas Edisons Pearl Street Electricity Generating Station. This station introduced four elements of an electric utility system, Efficient distribution, competitive price, reliable central generation
7.
Volt
–
The volt is the derived unit for electric potential, electric potential difference, and electromotive force. One volt is defined as the difference in potential between two points of a conducting wire when an electric current of one ampere dissipates one watt of power between those points. It is also equal to the difference between two parallel, infinite planes spaced 1 meter apart that create an electric field of 1 newton per coulomb. Additionally, it is the difference between two points that will impart one joule of energy per coulomb of charge that passes through it. It can also be expressed as amperes times ohms, watts per ampere, or joules per coulomb, for the Josephson constant, KJ = 2e/h, the conventional value KJ-90 is used, K J-90 =0.4835979 GHz μ V. This standard is typically realized using an array of several thousand or tens of thousands of junctions. Empirically, several experiments have shown that the method is independent of device design, material, measurement setup, etc. in the water-flow analogy sometimes used to explain electric circuits by comparing them with water-filled pipes, voltage is likened to difference in water pressure. Current is proportional to the diameter of the pipe or the amount of water flowing at that pressure. A resistor would be a reduced diameter somewhere in the piping, the relationship between voltage and current is defined by Ohms Law. Ohms Law is analogous to the Hagen–Poiseuille equation, as both are linear models relating flux and potential in their respective systems, the voltage produced by each electrochemical cell in a battery is determined by the chemistry of that cell. Cells can be combined in series for multiples of that voltage, mechanical generators can usually be constructed to any voltage in a range of feasibility. High-voltage electric power lines,110 kV and up Lightning, Varies greatly. Volta had determined that the most effective pair of metals to produce electricity was zinc. In 1861, Latimer Clark and Sir Charles Bright coined the name volt for the unit of resistance, by 1873, the British Association for the Advancement of Science had defined the volt, ohm, and farad. In 1881, the International Electrical Congress, now the International Electrotechnical Commission and they made the volt equal to 108 cgs units of voltage, the cgs system at the time being the customary system of units in science. At that time, the volt was defined as the difference across a conductor when a current of one ampere dissipates one watt of power. The international volt was defined in 1893 as 1/1.434 of the emf of a Clark cell and this definition was abandoned in 1908 in favor of a definition based on the international ohm and international ampere until the entire set of reproducible units was abandoned in 1948. Prior to the development of the Josephson junction voltage standard, the volt was maintained in laboratories using specially constructed batteries called standard cells
8.
German language
–
German is a West Germanic language that is mainly spoken in Central Europe. It is the most widely spoken and official language in Germany, Austria, Switzerland, South Tyrol, the German-speaking Community of Belgium and it is also one of the three official languages of Luxembourg. Major languages which are most similar to German include other members of the West Germanic language branch, such as Afrikaans, Dutch, English, Luxembourgish and it is the second most widely spoken Germanic language, after English. One of the languages of the world, German is the first language of about 95 million people worldwide. The German speaking countries are ranked fifth in terms of publication of new books. German derives most of its vocabulary from the Germanic branch of the Indo-European language family, a portion of German words are derived from Latin and Greek, and fewer are borrowed from French and English. With slightly different standardized variants, German is a pluricentric language, like English, German is also notable for its broad spectrum of dialects, with many unique varieties existing in Europe and also other parts of the world. The history of the German language begins with the High German consonant shift during the migration period, when Martin Luther translated the Bible, he based his translation primarily on the standard bureaucratic language used in Saxony, also known as Meißner Deutsch. Copies of Luthers Bible featured a long list of glosses for each region that translated words which were unknown in the region into the regional dialect. Roman Catholics initially rejected Luthers translation, and tried to create their own Catholic standard of the German language – the difference in relation to Protestant German was minimal. It was not until the middle of the 18th century that a widely accepted standard was created, until about 1800, standard German was mainly a written language, in urban northern Germany, the local Low German dialects were spoken. Standard German, which was different, was often learned as a foreign language with uncertain pronunciation. Northern German pronunciation was considered the standard in prescriptive pronunciation guides though, however, German was the language of commerce and government in the Habsburg Empire, which encompassed a large area of Central and Eastern Europe. Until the mid-19th century, it was essentially the language of townspeople throughout most of the Empire and its use indicated that the speaker was a merchant or someone from an urban area, regardless of nationality. Some cities, such as Prague and Budapest, were gradually Germanized in the years after their incorporation into the Habsburg domain, others, such as Pozsony, were originally settled during the Habsburg period, and were primarily German at that time. Prague, Budapest and Bratislava as well as cities like Zagreb, the most comprehensive guide to the vocabulary of the German language is found within the Deutsches Wörterbuch. This dictionary was created by the Brothers Grimm and is composed of 16 parts which were issued between 1852 and 1860, in 1872, grammatical and orthographic rules first appeared in the Duden Handbook. In 1901, the 2nd Orthographical Conference ended with a standardization of the German language in its written form
9.
Narrow-gauge railway
–
A narrow-gauge railway is a railway with a track gauge narrower than the 1,435 mm of standard gauge railways. Most existing narrow-gauge railways are between 600 mm and 1,067 mm, narrow-gauge railways also have specialized use in mines and other environments where a very small structure gauge makes a very small loading gauge necessary. Narrow-gauge railways also have general applications. Many narrow-gauge street tramways are used, particularly in Europe, where 1,000 mm metre gauge tramways are common, the earliest recorded railway is shown in the De re metallica of 1556, which shows a mine in Bohemia with a railway of about 2 ft gauge. During the 16th century, railways were mainly restricted to hand-pushed narrow-gauge lines in mines throughout Europe, during the 17th century, mine railways were extended to provide transportation above ground. These lines were industrial, connecting mines with nearby transportation points and these railways were usually built to the same narrow gauge as the mine railways from which they developed. The worlds first steam locomotive on rails, built in 1802 by Richard Trevithick for the Coalbrookdale Company, during the 1820s and 1830s, a number of industrial narrow-gauge railways in the United Kingdom used steam locomotives. In 1842, the first narrow-gauge steam locomotive outside the UK was built for the 1,100 mm gauge Antwerp-Ghent Railway in Belgium, historically, many narrow-gauge railways were built as part of specific industrial enterprises and were primarily industrial railways rather than general carriers. Some common uses for these industrial narrow-gauge railways were mining, logging, construction, tunnelling, quarrying, extensive narrow-gauge networks were constructed in many parts of the world for these purposes. For example, mountain logging operations in the 19th century often used narrow-gauge railways to transport logs from mill sites to market, significant sugarcane railways still operate in Cuba, Fiji, Java, the Philippines, and Queensland. Narrow-gauge railway equipment remains in use for the construction of tunnels. Extensive narrow-gauge railway systems served the front-line trenches of both sides in World War I and they were a short-lived military application, and after the end of the war, the surplus equipment from these created a small boom in narrow gauge railway building in Europe. Narrow-gauge railways usually cost less to build because they are lighter in construction, using smaller cars and locomotives, as well as smaller bridges, smaller tunnels. Narrow gauge is often used in mountainous terrain, where the savings in civil engineering work can be substantial. It is also used in populated areas where the potential demand is too low for broader gauge railways to be economically viable. This is the case in some of Australia and most of Southern Africa, the use of such railways has almost vanished due to the capabilities of modern trucks. In many countries, narrow gauge railways were built as feeder or branch lines to feed traffic to more important standard gauge lines, the choice was often not between a narrow-gauge railway and a standard gauge one, but between a narrow-gauge railway and none at all. Some bulk commodities, such as coal, ore, and gravel, can be transshipped, but this still incurs time penalties
10.
Rail transport
–
Rail transport is a means of conveyance of passengers and goods on wheeled vehicles running on rails, also known as tracks. It is also referred to as train transport. In contrast to road transport, where vehicles run on a flat surface. Tracks usually consist of rails, installed on ties and ballast, on which the rolling stock, usually fitted with metal wheels. Other variations are possible, such as slab track, where the rails are fastened to a concrete foundation resting on a prepared subsurface. Rolling stock in a transport system generally encounters lower frictional resistance than road vehicles, so passenger. The operation is carried out by a company, providing transport between train stations or freight customer facilities. Power is provided by locomotives which either draw electric power from a railway system or produce their own power. Most tracks are accompanied by a signalling system, Railways are a safe land transport system when compared to other forms of transport. The oldest, man-hauled railways date back to the 6th century BC, with Periander, one of the Seven Sages of Greece, Rail transport blossomed after the British development of the steam locomotive as a viable source of power in the 19th centuries. With steam engines, one could construct mainline railways, which were a key component of the Industrial Revolution, also, railways reduced the costs of shipping, and allowed for fewer lost goods, compared with water transport, which faced occasional sinking of ships. The change from canals to railways allowed for markets in which prices varied very little from city to city. In the 1880s, electrified trains were introduced, and also the first tramways, starting during the 1940s, the non-electrified railways in most countries had their steam locomotives replaced by diesel-electric locomotives, with the process being almost complete by 2000. During the 1960s, electrified high-speed railway systems were introduced in Japan, other forms of guided ground transport outside the traditional railway definitions, such as monorail or maglev, have been tried but have seen limited use. The history of the growth, decline and restoration to use of transport can be divided up into several discrete periods defined by the principal means of motive power used. The earliest evidence of a railway was a 6-kilometre Diolkos wagonway, trucks pushed by slaves ran in grooves in limestone, which provided the track element. The Diolkos operated for over 600 years, Railways began reappearing in Europe after the Dark Ages. The earliest known record of a railway in Europe from this period is a window in the Minster of Freiburg im Breisgau in Germany
