1.
Geographic coordinate system
–
A geographic coordinate system is a coordinate system used in geography that enables every location on Earth to be specified by a set of numbers, letters or symbols. The coordinates are chosen such that one of the numbers represents a vertical position. A common choice of coordinates is latitude, longitude and elevation, to specify a location on a two-dimensional map requires a map projection. The invention of a coordinate system is generally credited to Eratosthenes of Cyrene. Ptolemy credited him with the adoption of longitude and latitude. Ptolemys 2nd-century Geography used the prime meridian but measured latitude from the equator instead. Mathematical cartography resumed in Europe following Maximus Planudes recovery of Ptolemys text a little before 1300, in 1884, the United States hosted the International Meridian Conference, attended by representatives from twenty-five nations. Twenty-two of them agreed to adopt the longitude of the Royal Observatory in Greenwich, the Dominican Republic voted against the motion, while France and Brazil abstained. France adopted Greenwich Mean Time in place of local determinations by the Paris Observatory in 1911, the latitude of a point on Earths surface is the angle between the equatorial plane and the straight line that passes through that point and through the center of the Earth. Lines joining points of the same latitude trace circles on the surface of Earth called parallels, as they are parallel to the equator, the north pole is 90° N, the south pole is 90° S. The 0° parallel of latitude is designated the equator, the plane of all geographic coordinate systems. The equator divides the globe into Northern and Southern Hemispheres, the longitude of a point on Earths surface is the angle east or west of a reference meridian to another meridian that passes through that point. All meridians are halves of great ellipses, which converge at the north and south poles, the prime meridian determines the proper Eastern and Western Hemispheres, although maps often divide these hemispheres further west in order to keep the Old World on a single side. The antipodal meridian of Greenwich is both 180°W and 180°E, the combination of these two components specifies the position of any location on the surface of Earth, without consideration of altitude or depth. The grid formed by lines of latitude and longitude is known as a graticule, the origin/zero point of this system is located in the Gulf of Guinea about 625 km south of Tema, Ghana. To completely specify a location of a feature on, in, or above Earth. Earth is not a sphere, but a shape approximating a biaxial ellipsoid. It is nearly spherical, but has an equatorial bulge making the radius at the equator about 0. 3% larger than the radius measured through the poles, the shorter axis approximately coincides with the axis of rotation
2.
Turkey
–
Turkey, officially the Republic of Turkey, is a transcontinental country in Eurasia, mainly in Anatolia in Western Asia, with a smaller portion on the Balkan peninsula in Southeast Europe. Turkey is a democratic, secular, unitary, parliamentary republic with a cultural heritage. The country is encircled by seas on three sides, the Aegean Sea is to the west, the Black Sea to the north, and the Mediterranean Sea to the south. The Bosphorus, the Sea of Marmara, and the Dardanelles, Ankara is the capital while Istanbul is the countrys largest city and main cultural and commercial centre. Approximately 70-80% of the countrys citizens identify themselves as ethnic Turks, other ethnic groups include legally recognised and unrecognised minorities. Kurds are the largest ethnic minority group, making up approximately 20% of the population, the area of Turkey has been inhabited since the Paleolithic by various ancient Anatolian civilisations, as well as Assyrians, Greeks, Thracians, Phrygians, Urartians and Armenians. After Alexander the Greats conquest, the area was Hellenized, a process continued under the Roman Empire. The Seljuk Sultanate of Rûm ruled Anatolia until the Mongol invasion in 1243, the empire reached the peak of its power in the 16th century, especially during the reign of Suleiman the Magnificent. During the war, the Ottoman government committed genocides against its Armenian, Assyrian, following the war, the conglomeration of territories and peoples that formerly comprised the Ottoman Empire was partitioned into several new states. Turkey is a member of the UN, an early member of NATO. Turkeys growing economy and diplomatic initiatives have led to its recognition as a regional power while her location has given it geopolitical, the name of Turkey is based on the ethnonym Türk. The first recorded use of the term Türk or Türük as an autonym is contained in the Old Turkic inscriptions of the Göktürks of Central Asia, the English name Turkey first appeared in the late 14th century and is derived from Medieval Latin Turchia. Similarly, the medieval Khazar Empire, a Turkic state on the shores of the Black. The medieval Arabs referred to the Mamluk Sultanate as al-Dawla al-Turkiyya, the Ottoman Empire was sometimes referred to as Turkey or the Turkish Empire among its European contemporaries. The Anatolian peninsula, comprising most of modern Turkey, is one of the oldest permanently settled regions in the world, various ancient Anatolian populations have lived in Anatolia, from at least the Neolithic period until the Hellenistic period. Many of these peoples spoke the Anatolian languages, a branch of the larger Indo-European language family, in fact, given the antiquity of the Indo-European Hittite and Luwian languages, some scholars have proposed Anatolia as the hypothetical centre from which the Indo-European languages radiated. The European part of Turkey, called Eastern Thrace, has also been inhabited since at least forty years ago. It is the largest and best-preserved Neolithic site found to date, the settlement of Troy started in the Neolithic Age and continued into the Iron Age
3.
Provinces of Turkey
–
Turkey is divided into 81 provinces. Each province is divided into a number of different districts, the provincial government is seated in the central district. The central area usually bears the name of the province, there are only two exceptions to this naming scheme, Antakya of Hatay province İzmit of Kocaeli province A province is administered by an appointed governor from the ministry of interior. Below is a list of the 81 provinces of Turkey, sorted according to their license plate code, after Zonguldak the ordering is not alphabetical but in the order of the creation of provinces, as these provinces were created more recently and thus their plate numbers were assigned thereafter. The numbers of the ISO code, the first two digits of the registration plates of Turkey and the first digits of the postal codes in Turkey are the same
4.
Republican People's Party (Turkey)
–
The Republican Peoples Party is a Kemalist and social-democratic political party in Turkey. It is the oldest political party of the Republic of Turkey and is currently the opposition in the Grand National Assembly. The Republican Peoples Party describes itself as a modern social-democratic party, also, the party is cited as the founding party of modern Turkey. The political party was established during the Congress of Sivas in 1919 as a union of resistance groups against the invasion of Anatolia, the union represented Turkish people as a unified front during the Turkish War of Independence. On 9 September 1923, the Peoples Party officially declared itself as an organization and on October 29,1923. On 10 November 1924, the Peoples Party renamed itself to Republican Peoples Party as Turkey moved into a one-party period, during the one-party period, the CHP became the major political organisation of a one-party state. Both of which, however, were banned within a few months of their establishment by the state for veering too closely to Islamism and this experience was followed by the founding of the National Development Party by Nuri Demirağ in 1945. The current structure of the party was established within the transition to the multi-party period, after World War II, the leader of the CHP İsmet İnönü introduced democratic elections to Turkish society. Due to widespread dissatisfaction with the CHP in the four years after its victory in the first multi-party general election, celâl Bayar then replaced İnönü as President. During the interim multi-party periods in between the military coups of 1960,1971, and 1980, CHP is regarded as being social-democratic, state nationalistic and secular/laicist. The partys logo consists of the Six Arrows, which represent the principles of Kemalism, republicanism, nationalism, statism, populism, laïcité. The CHP, along all other political parties of the time, was closed down for a brief period by the military coup of 1980. An inheritor party which still participates in Turkish democratic life was established in 1984 by the name of the Democratic Left Party, created by the leader of CHP. CHP was finally re-established with its name on 9 September 1992. Nevertheless, the relationship between CHP and some trade unions, business chambers and most non-governmental organisations alienated many voters. The distance between the party administration and many leftist grassroots, especially left oriented Kurdish voters, contributed to the shift away from the political left. CHP urged the Socialist International to accept Republican Turkish Party of the Turkish Republic of Northern Cyprus as an observer member, at the 2007 general election CHP ran in alliance with Democratic Left Party. CHP suffered a defeat, getting 7,300,234 votes
5.
Kaymakam
–
According to some, the first kaymakam in history was ‘Alī ibn Abī Ṭālib, who is supposed to have been appointed by the Islamic prophet, Muhammad, as the first rightful caliph. Thus, ‘Alī was considered to be serving in the place of Muhammad, in this context, the word may be spelled caimacam, while the Romanian term for the office is căimăcămie. Similarly, three ruling native hakims of the emirate of Kuwait, were also Kaymakam of a kazas in the same province,1871 till a British protectorate. The practice began in the 16th century, or perhaps even earlier, the kaymakam enjoyed the full plenitude of powers of the Grand Vizier, but was not allowed to intervene in the conduct of the military campaigns. In the last decades of the Empire, the post of kaymakam was filled by the members of the imperial cabinet, the modernization and Westernization reforms instituted in the 19th century added new meanings to the term. With the establishment of the regular Asakir-i Mansure-i Muhammediye troops in 1826, kaymakam became a rank in the Ottoman army, equivalent to a lieutenant colonel. It remained in use throughout the century of the Empire, and continued in use in the Turkish Republic until the 1930s. The system was retained by modern Turkey, where a sub-province is still headed by a kaymakam, the rank is attested in use with a British officer commanding the Equatorial Battalion in East Africa,1918, Kaimakam R F White DSO who was an officer of the Essex Regiment. Subdivisions of the Ottoman Empire WorldStatesMen. org, see present nations
6.
Bornova
–
Bornova is a metropolitan district of İzmir in İzmir Province in Turkey. Bornovas center is situated at a distance of 8 km to the northeast from the center of İzmir and 5 km from the coastline at the tip of the Gulf of İzmir to the west. During the Ottoman period, Bornova was called Birunabad, often rendered as Bournabad or Bournabat in Western sources, as such, Birunabad, Bournabat and now Bornova could be converted forms of this name. The municipality of Bornova was established in 1881 and the became a district center in 1957. The incumbent mayor of İzmir Greater Metropolitan Municipality, Aziz Kocaoğlu, was the mayor of Bornova before taking over his present office for the city as a whole, the urban area is divided into 36 officially constituted and delimited neighborhoods. Several unofficial denominations for neighborhoods are also in use across İzmir and beyond to describe localities often with determined centers but vague boundaries. Twelve small villages, mostly located in the uplands around Mount Yamanlar and with a cumulative population of 6,354 -as against the district total of 464, 694-. Despite the obvious luxurious style of the residences they built, these new inhabitants did not always have lives in all comfort. A number of cases of kidnapping involving brigands and the owners of these residences. Turkeys first athletic contest was held in Bornova in 1895. The urban growth occurred the direction both of the seashore and to the east towards Kemalpaşa, as well as to the south in Altındağ zone, the populations growth rate reached as high as 30-35 per cent in certain years. Bornova district counts 147,037 residential buildings, Bornova center is served by a railway connection since 1867, initially by a branch line of İzmir-Kasaba railway completed during the same decade. Bornova has 80 primary schools and 102 kindergartens, at secondary-level education, there are 19 high schools and 22 professional schools. The figures for the student and teachers corps are shown in the table, the average student per teacher ratio is, with primary education the most congested at 25, 5%. The university had 42,693 students and 2,895 academic staff in 2007, illiteracy is an issue almost exclusively restricted to new migrants into Bornova, and especially to women among these. There are also a number of initiatives in the same field. 855 Bornova companies are registered exporters and an amount of 596,224,735 US Dollars could be estimated for 2006 as exports which were made by Bornova district companies. 83 companies with capital participation operate in Bornova and the recorded amount of foreign direct investments between 1997-2007 was 71,928,267 US Dollars
7.
Ankara
–
Ankara, formerly known as Ancyra and Angora, is the capital of the Republic of Turkey. With a population of 4,587,558 in the center and 5,150,072 in its province. Ankara was Atatürks headquarters from 1920 and has been the capital of the Republic since its founding in 1923, the government is a prominent employer, but Ankara is also an important commercial and industrial city, located at the center of Turkeys road and railway networks. The city gave its name to the Angora wool shorn from Angora rabbits, the long-haired Angora goat, the area is also known for its pears, honey, and muscat grapes. Ankara is an old city with various Hittite, Phrygian, Hellenistic, Roman, Byzantine. The historical center of town is a hill rising 150 m over the left bank of the Ankara Çayı, a tributary of the Sakarya River. The hill remains crowned by the ruins of the old citadel, as with many ancient cities, Ankara has gone by several names over the ages. It has been identified with the Hittite cult center Ankuwaš, although remains a matter of debate. In classical antiquity and during the period, the city was known as Ánkyra in Greek and Ancyra in Latin. Following its annexation by the Seljuk Turks in 1073, the city known in many European languages as Angora. The form Angora is preserved in the names of breeds of different kinds of animals. The oldest settlements in and around the city center of Ankara belonged to the Hattic civilization which existed during the Bronze Age and was gradually absorbed c, 2000–1700 BC by the Indo-European Hittites. In Phrygian tradition, King Midas was venerated as the founder of Ancyra, but Pausanias mentions that the city was far older. Persian sovereignty lasted until the Persians defeat at the hands of Alexander the Great who conquered the city in 333 BC, Alexander came from Gordion to Ankara and stayed in the city for a short period. After his death at Babylon in 323 BC and the subsequent division of his empire among his generals, Ankara, by that time the city also took its name Ἄγκυρα which, in slightly modified form, provides the modern name of Ankara. Other centers were Pessinos, todays Balhisar, for the Trocmi tribe, the city was then known as Ancyra. The Celtic element was probably relatively small in numbers, an aristocracy which ruled over Phrygian-speaking peasants. However, the Celtic language continued to be spoken in Galatia for many centuries
8.
Manisa
–
Manisa is a large city in Turkeys Aegean Region and the administrative seat of Manisa Province. Under Ottoman rule in the centuries that followed, the city had already extended into the terrain at the start of the plain. It is also a point for other visitor attractions of international acclaim which are located nearby within Manisas depending region, such as Sardes. Historically, the city was also called Magnesia, and more precisely as Magnesia ad Sipylum to distinguish from Magnesia on the Maeander at a short distance to the south. Traditional view held that the name Magnesia derived from the tribe of Magnetes who would have immigrated here from Thessaly at the dawn of the recorded history. A connection with native Anatolian languages has also been suggested of recent date, the name is rendered as Μαγνησία in ancient and modern Greek language. The names Sipylus or Sipylum in reference to a settlement here are also encountered in some sources, again in reference to the mountain and as abbreviated forms. Traces of prehistory in the Manisa region, although few in number, the second finds are tombs contemporaneous with Troy II and found in the village of Yortan near Kırkağaç district center, north of Manisa. Original burial practices observed in these sepulchres led scholars to the definition of a Yortan culture in Anatolias prehistory, cybele monument by itself represents a step of innovation in Hittite art where full-faced figures in high relief are rare. The first millennium BC saw the emergence in the region of Phrygians and Maeonians, the accounts concerning which are blended with myths. The vestiges from their capital which reached our day bring together remains from successive civilizations. It became a city of importance under the Roman dominion and, though nearly destroyed by an earthquake in the reign of Tiberius, was restored by that emperor and flourished through the Roman empire. It was an important regional centre through the Byzantine Empire, Magnesia housed the Imperial mint, the Imperial treasury, and served as the functional capital of the empire until the recovery of Constantinople in 1261. Ruins of the Nicean-era fortifications attest to the importance in the Late Byzantine period. In the early 13th century the region of Magnesia was subject to repeated raids by invading Turkish bands, the local population was unable to repulse the Turkish raids. Thus, after an unsuccessful defence lead by the Byzantine Emperor most inhabitants fled to the Aegean coast, as a result of the Turkish invasion in the region and the destruction of the city the area was largely abandoned. His sons held the region until 1390, when the first incorporation of their lands into the expanding Ottoman state took place, after a brief interval caused by the Ottoman interregnum after the Battle of Ankara, Manisa and its surroundings definitely became part of the Ottoman Empire in 1410. Even during the 15th century Magnesia was recorded as being in ruins due to the previous Turkish raids
9.
Turgutlu
–
Turgutlu, also known as Kasaba is a city and district in Manisa Province in the Aegean region of Turkey. According to 2009 census, its population is 140,753,115,930 live in the city itself. The district covers an area of 473 km2 at an elevation of 68 m, the district is the most populous after the provincial center of Manisa and the second most populous district center, in Turkeys Aegean Region. Their settlement in Turgutlu region is thought to have taken some time in the 15th century at the same time as the Ottoman unification of Anatolia which resulted in the demise of Karamanids. The city was alternatively called Kasaba, which means the town. There are two townships with their own municipalities within the district and 37 villages and nine village dependencies or hamlets. Turgutlu center is at a distance of only 31 km to Manisa, to which it depends administratively and its closeness to these two metropolitan centers both of which have a deep and rooted history marked Turgutlus destiny since its foundation in the 15th century. There are 44 primary schools and 14 schools providing education in Turgutlu district. There is also a professional school, a department of Celal Bayar University. The state hospital at Turgutlu center has a bed capacity of 250, the towns industrial sector as a whole displays as high a degree of dynamism as its agricultural production, with many small- and medium-sized enterprises active in various fields. Experimental mining of nickel laterites by using a heap leach process in Mount Çal near Turgutlu started in 2005 by a Turkish subsidiary of European Nickel PLC, the reserves are estimated to be 33 million tons of ore at 1. 13% Nickel and 0. 08% cobalt content. The planned development of a mine and processing plant could deeply influence the districts economy with a potential to become one of the most important investments in Turkeys Aegean Region. For more information about Turgutlu http, //turgutlulu. com can visit the web site, the town was an important regional trade center and hub already since the 18th century. It acquired further importance once it became the first terminus of the 93 km, Smyrna Cassaba Railway whose construction was started from İzmir in 1863 and which arrived in Kasaba in 1866. This railway was the third started within the territory of the Ottoman Empire at the time, belkahve Pass between Mount Nif and Mount Sipylus on the direct road from İzmir and Turgutlu must have been judged too difficult for a track at the time. This railway was extended further eastwards reaching a total length exceeding seven hundred kilometers. The line was nationalized in 1934 by the young Republic of Turkey in the frame of a move started in the 1920s regarding Turkeys railways. The town was made into a kaza in 1868, during the final years of the Ottoman Empire, Kasaba was already a large town whose population well exceeded ten thousand people
10.
Industrial park
–
An industrial park is an area zoned and planned for the purpose of industrial development. An industrial park can be thought of as a more heavyweight version of a park or office park. Industrial parks are located on the edges of, or outside the main residential area of a city. One such example would be the number of industrial estates located along the River Thames in the Thames Gateway area of London. Industrial parks are located close to transport facilities, especially where more than one transport modes coincide, including highways, railroads. Such infrastructure includes roadways, railroad sidings, ports, high-power electric supplies, high-end communications cables, large-volume water supplies, to be able to attract new business by providing an integrated infrastructure in one location. Eligibility of Industrial Parks for benefits To set aside industrial uses from urban areas to try to reduce the environmental and social impact of the industrial uses, to provide for localized environmental controls that are specific to the needs of an industrial area. Different industrial parks fulfill these criteria to differing degrees, many small communities have established industrial parks with only access to a nearby highway, and with only the basic utilities and roadways. Public transportation options may be limited or non-existent, there may be few or no special environmental safeguards. An industrial park specializing in biotechnology is called an industrial park. It may also be known as a park or eco-industrial cluster. Flatted factories exist in cities like Singapore and Hong Kong, where land is scarce and these are typically similar to flats, but house individual industries instead. Flatted factories have cargo lifts and roads that serve each level, UNIDO Viet Nam has compiled a list of Industrial Parks in the ASEAN Economic Community in a report titled Economic Zones in the ASEAN written by Arnault Morisson
11.
Rubber
–
Natural rubber, also called India rubber or caoutchouc, as initially produced, consists of polymers of the organic compound isoprene, with minor impurities of other organic compounds, plus water. Malaysia and Indonesia are two of the leading rubber producers, forms of polyisoprene that are used as natural rubbers are classified as elastomers. Currently, rubber is harvested mainly in the form of the latex from the tree or others. The latex is a sticky, milky colloid drawn off by making incisions in the bark, the latex then is refined into rubber ready for commercial processing. In major areas, latex is allowed to coagulate in the collection cup, the coagulated lumps are collected and processed into dry forms for marketing. Natural rubber is used extensively in many applications and products, either alone or in combination with other materials, in most of its useful forms, it has a large stretch ratio and high resilience, and is extremely waterproof. The major commercial source of rubber latex is the Pará rubber tree. This species is preferred because it grows well under cultivation, a properly managed tree responds to wounding by producing more latex for several years. Congo rubber, formerly a source of rubber, came from vines in the genus Landolphia. These cannot be cultivated, and the drive to collect latex from wild plants was responsible for many of the atrocities committed under the Congo Free State. The latex exhibits the quality as the natural rubber from rubber trees. In the wild types of dandelion, latex content is low, in Nazi Germany, research projects tried to use dandelions as a base for rubber production, but failed. In collaboration with Continental Tires, IME began a pilot facility, many other plants produce forms of latex rich in isoprene polymers, though not all produce usable forms of polymer as easily as the Pará. Some of them require more processing to produce anything like usable rubber. Some produce other desirable materials, for example gutta-percha and chicle from Manilkara species, the term gum rubber is sometimes applied to the tree-obtained version of natural rubber in order to distinguish it from the synthetic version. The first use of rubber was by the cultures of Mesoamerica. The earliest archeological evidence of the use of latex from the Hevea tree comes the Olmec culture. The Pará rubber tree is indigenous to South America, charles Marie de La Condamine is credited with introducing samples of rubber to the Académie Royale des Sciences of France in 1736
12.
Plastic
–
Plastic is a material consisting of any of a wide range of synthetic or semi-synthetic organic compounds that are malleable and can be molded into solid objects. Plastics are typically organic polymers of high mass, but they often contain other substances. They are usually synthetic, most commonly derived from petrochemicals, due to their relatively low cost, ease of manufacture, versatility, and imperviousness to water, plastics are used in an enormous and expanding range of products, from paper clips to spaceships. They have already displaced many traditional materials, such as wood, stone, horn and bone, leather, paper, metal, glass, and ceramic, in most of their former uses. In developed countries, about a third of plastic is used in packaging, other uses include automobiles, furniture, and toys. In the developing world, the ratios may be different - for example, the worlds first fully synthetic plastic was bakelite, invented in New York in 1907 by Leo Baekeland who coined the term plastics. Toward the end of the century, one approach to this problem was met with wide efforts toward recycling, the word plastic is derived from the Greek πλαστικός meaning capable of being shaped or molded, from πλαστός meaning molded. The common word plastic should not be confused with the technical adjective plastic, used for insulating parts in electrical fixtures, paper laminated products, thermally insulation foams. Problems include the probability of moldings naturally being dark colors, One of the most expensive commercial polymers. It forms the basis of artistic and commercial acrylic paints when suspended in water with the use of other agents, polytetrafluoroethylene – Heat-resistant, low-friction coatings, used in things like non-stick surfaces for frying pans, plumbers tape and water slides. It is more known as Teflon. Urea-formaldehyde – One of the aminoplasts and used as an alternative to phenolics. Used as an adhesive and electrical switch housings. Early plastics were bio-derived materials such as egg and blood proteins, in 1600 BC, Mesoamericans used natural rubber for balls, bands, and figurines. Treated cattle horns were used as windows for lanterns in the Middle Ages, materials that mimicked the properties of horns were developed by treating milk-proteins with lye. In the 1800s, as industrial chemistry developed during the Industrial Revolution, the development of plastics also accelerated with Charles Goodyears discovery of vulcanization to thermoset materials derived from natural rubber. Parkesine is considered the first man-made plastic, the plastic material was patented by Alexander Parkes, In Birmingham, UK in 1856. It was unveiled at the 1862 Great International Exhibition in London, parkesine won a bronze medal at the 1862 Worlds fair in London
13.
Textile
–
A textile or cloth is a flexible material consisting of a network of natural or artificial fibres. Yarn is produced by spinning raw fibres of wool, flax, cotton, hemp, Textiles are formed by weaving, knitting, crocheting, knotting, or felting. The words fabric and cloth are used in textile assembly trades as synonyms for textile, however, there are subtle differences in these terms in specialized usage. Textile refers to any material made of interlacing fibres, a fabric is a material made through weaving, knitting, spreading, crocheting, or bonding that may be used in production of further goods. Cloth may be used synonymously with fabric but is often a piece of fabric used for a specific purpose. The word textile is from Latin, from the adjective textilis, meaning woven, from textus, the word cloth derives from the Old English clað, meaning a cloth, woven or felted material to wrap around one, from Proto-Germanic kalithaz. The discovery of dyed flax fibres in a cave in the Republic of Georgia dated to 34,000 BCE suggests textile-like materials were made even in prehistoric times. The production of textiles is a craft whose speed and scale of production has been altered almost beyond recognition by industrialization, however, for the main types of textiles, plain weave, twill, or satin weave, there is little difference between the ancient and modern methods. Textiles have an assortment of uses, the most common of which are for clothing and for such as bags. In the household they are used in carpeting, upholstered furnishings, window shades, towels, coverings for tables, beds, and other flat surfaces, in the workplace they are used in industrial and scientific processes such as filtering. Textiles are used in traditional crafts such as sewing, quilting. Textiles for industrial purposes, and chosen for other than their appearance, are commonly referred to as technical textiles. Technical textiles include textile structures for applications, medical textiles, geotextiles, agrotextiles. In all these applications stringent performance requirements must be met, woven of threads coated with zinc oxide nanowires, laboratory fabric has been shown capable of self-powering nanosystems using vibrations created by everyday actions like wind or body movements. Fashion designers commonly rely on textile designs to set their fashion collections apart from others, armani, the late Gianni Versace, and Emilio Pucci can be easily recognized by their signature print driven designs. Textiles can be made from many materials and these materials come from four main sources, animal, plant, mineral, and synthetic. In the past, all textiles were made from natural fibres, including plant, animal, in the 20th century, these were supplemented by artificial fibres made from petroleum. Textiles are made in various strengths and degrees of durability, from the finest gossamer to the sturdiest canvas, microfibre refers to fibres made of strands thinner than one denier
14.
Clothing
–
Clothing is fiber and textile material worn on the body. The wearing of clothing is mostly restricted to human beings and is a feature of all human societies. The amount and type of clothing worn depends on type, social. Some clothing types can be gender-specific, physically, clothing serves many purposes, it can serve as protection from the elements, and can enhance safety during hazardous activities such as hiking and cooking. It protects the wearer from rough surfaces, rash-causing plants, insect bites, splinters, thorns, Clothes can insulate against cold or hot conditions. Further, they can provide a barrier, keeping infectious. Clothing also provides protection from ultraviolet radiation, there is no easy way to determine when clothing was first developed, but some information has been inferred by studying lice. The body louse specifically lives in clothing, and diverge from head lice about 170 millennia ago, another theory is that modern humans are the only survivors of several species of primates who may have worn clothes and that clothing may have been used as long ago as 650 millennia. Other louse-based estimates put the introduction of clothing at around 42, the most obvious function of clothing is to improve the comfort of the wearer, by protecting the wearer from the elements. In hot climates, clothing provides protection from sunburn or wind damage, shelter usually reduces the functional need for clothing. For example, coats, hats, gloves, and other layers are normally removed when entering a warm home. Similarly, clothing has seasonal and regional aspects, so that thinner materials, Clothing performs a range of social and cultural functions, such as individual, occupational and gender differentiation, and social status. In many societies, norms about clothing reflect standards of modesty, religion, gender, Clothing may also function as a form of adornment and an expression of personal taste or style. Clothing can and has in history been made from a wide variety of materials. Materials have ranged from leather and furs, to materials, to elaborate and exotic natural. Not all body coverings are regarded as clothing, Clothing protects against many things that might injure the uncovered human body. Clothes protect people from the elements, including rain, snow, wind, however, clothing that is too sheer, thin, small, tight, etc. offers less protection. Clothes also reduce risk during activities such as work or sport, some clothing protects from specific environmental hazards, such as insects, noxious chemicals, weather, weapons, and contact with abrasive substances
15.
Leather
–
Leather is a durable and flexible material created by tanning animal rawhide and skin, often cattle hide. It can be produced at manufacturing scales ranging from cottage industry to heavy industry, people use leather to make various goods—including clothing, bookbinding, leather wallpaper, and as a furniture covering. It is produced in a variety of types and styles. Several tanning processes transform hides and skins into leather, Chrome-tanned leather, invented in 1858, is tanned using chromium sulfate and it is more supple and pliable than vegetable-tanned leather and does not discolor or lose shape as drastically in water as vegetable-tanned. It is also known as wet-blue for its color derived from the chromium, more exotic colors are possible when using chrome tanning. The chrome tanning method usually only takes a day to finish, and it is reported that chrome-tanned leather adds up to 80% of the global leather supply. Vegetable-tanned leather is tanned using tannins and other found in different vegetable matter, such as tree bark prepared in bark mills, wood, leaves, fruits. It is supple and brown in color, with the exact shade depending on the mix of chemicals and it is the only form of leather suitable for use in leather carving or stamping. Vegetable-tanned leather is not stable in water, it tends to discolor, so if left to soak and then dried it shrinks, in hot water, it shrinks drastically and partly congeals—becoming rigid, and eventually brittle. Boiled leather is an example of this, where the leather has been hardened by being immersed in hot water, historically, it was occasionally used as armour after hardening, and it has also been used for book binding. Aldehyde-tanned leather is tanned using glutaraldehyde or oxazolidine compounds and this is the leather that most tanners refer to as wet-white leather due to its pale cream or white color. It is the type of chrome-free leather, often seen in shoes for infants. Formaldehyde tanning is another aldehyde tanning method, brain-tanned leathers fall into this category, and are exceptionally water absorbent. Brain tanned leathers are made by a process that uses emulsified oils, often those of animal brains such as deer, cattle. They are known for their softness and washability. Chamois leather also falls into the category of aldehyde tanning, and like brain tanning, produces a porous, chamois leather is made using marine oils that oxidize easily to produce the aldehydes that tan the leather to color it. Rose-tanned leather is a variation of oil tanning and brain tanning. Rose-tanned leather tanned leaves a powerful rose fragrance even years from when it is manufactured and it has been called the most valuable leather on earth, but this is mostly due to the high cost of rose otto and its labor-intensive tanning process
16.
Paper
–
Paper is a thin material produced by pressing together moist fibres of cellulose pulp derived from wood, rags or grasses, and drying them into flexible sheets. It is a material with many uses, including writing, printing, packaging, cleaning. The modern pulp and paper industry is global, with China leading its production, the oldest known archaeological fragments of the immediate precursor to modern paper, date to the 2nd century BC in China. The pulp papermaking process is ascribed to Cai Lun, a 2nd-century AD Han court eunuch, with paper as an effective substitute for silk in many applications, China could export silk in greater quantity, contributing to a Golden Age. Because of papers introduction to the West through the city of Baghdad, in the 19th century, industrial manufacture greatly lowered its cost, enabling mass exchange of information and contributing to significant cultural shifts. In 1844, the Canadian inventor Charles Fenerty and the German F. G. Keller independently developed processes for pulping wood fibres, before the industrialisation of the paper production the most common fibre source was recycled fibres from used textiles, called rags. The rags were from hemp, linen and cotton, a process for removing printing inks from recycled paper was invented by German jurist Justus Claproth in 1774. Today this method is called deinking and it was not until the introduction of wood pulp in 1843 that paper production was not dependent on recycled materials from ragpickers. The word paper is etymologically derived from Latin papyrus, which comes from the Greek πάπυρος, although the word paper is etymologically derived from papyrus, the two are produced very differently and the development of the first is distinct from the development of the second. Papyrus is a lamination of natural plant fibres, while paper is manufactured from fibres whose properties have changed by maceration. To make pulp from wood, a chemical pulping process separates lignin from cellulose fibres and this is accomplished by dissolving lignin in a cooking liquor, so that it may be washed from the cellulose, this preserves the length of the cellulose fibres. Paper made from chemical pulps are also known as wood-free papers–not to be confused with paper, this is because they do not contain lignin. The pulp can also be bleached to produce paper, but this consumes 5% of the fibres, chemical pulping processes are not used to make paper made from cotton. There are three main chemical pulping processes, the process dates back to the 1840s and it was the dominant method extent before the second world war. Most pulping operations using the process are net contributors to the electricity grid or use the electricity to run an adjacent paper mill. Another advantage is that this process recovers and reuses all inorganic chemical reagents, soda pulping is another specialty process used to pulp straws, bagasse and hardwoods with high silicate content. There are two major mechanical pulps, thermomechanical pulp and groundwood pulp, in the TMP process, wood is chipped and then fed into steam heated refiners, where the chips are squeezed and converted to fibres between two steel discs. In the groundwood process, debarked logs are fed into grinders where they are pressed against rotating stones to be made into fibres
17.
Packaging and labeling
–
Packaging is the technology of enclosing or protecting products for distribution, storage, sale, and use. Packaging also refers to the process of designing, evaluating, Packaging can be described as a coordinated system of preparing goods for transport, warehousing, logistics, sale, and end use. Packaging contains, protects, preserves, transports, informs, in many countries it is fully integrated into government, business, institutional, industrial, and personal use. Package labeling or labelling is any written, electronic, or graphic communication on the package or on a separate but associated label. The first packages used the materials available at the time, baskets of reeds, wineskins, wooden boxes, pottery vases, ceramic amphorae, wooden barrels, woven bags. Processed materials were used to form packages as they were developed, for example, early glass, the study of old packages is an important aspect of archaeology. The use of tinplate for packaging dates back to the 18th century, by 1697, John Hanbury had a rolling mill at Pontypool for making Pontypoole Plates. The method pioneered there of rolling iron plates by means of cylinders enabled more uniform black plates to be produced than was possible with the practice of hammering. Tinplate boxes first began to be sold from ports in the Bristol Channel in 1725, the tinplate was shipped from Newport, Monmouthshire. By 1805,80,000 boxes were made and 50,000 exported, tobacconists in London began packaging snuff in metal-plated canisters from the 1760s onwards. With the discovery of the importance of airtight containers for food preservation by French inventor Nicholas Appert, after receiving the patent, Durand did not himself follow up with canning food. By 1813, they were producing the first canned goods for the Royal Navy, the progressive improvement in canning stimulated the 1855 invention of the can opener. In 1858, another lever-type opener of a complex shape was patented in the United States by Ezra Warner of Waterbury. Set-up boxes were first used in the 16th century and modern folding cartons date back to 1839, the first corrugated box was produced commercially in 1817 in England. Corrugated paper received a British patent in 1856 and was used as a liner for tall hats, scottish-born Robert Gair invented the pre-cut paperboard box in 1890—flat pieces manufactured in bulk that folded into boxes. Gair discovered that by cutting and creasing in one operation he could make prefabricated paperboard boxes, commercial paper bags were first manufactured in Bristol, England, in 1844, and the American Francis Wolle patented a machine for automated bag-making in 1852. Packaging advancements in the early 20th century included Bakelite closures on bottles, transparent cellophane overwraps and these innovations increased processing efficiency and improved food safety. As additional materials such as aluminum and several types of plastic were developed, they were incorporated into packages to improve performance, in 1952, Michigan State University became the first university in the world to offer a degree in Packaging Engineering
18.
Machine (mechanical)
–
Machines employ power to achieve desired forces and movement. A machine has a source and actuators that generate forces and movement. Modern machines often include computers and sensors that monitor performance and plan movement, the meaning of the word machine is traced by the Oxford English Dictionary to an independently functioning structure and by Merriam-Webster Dictionary to something that has been constructed. This includes human design into the meaning of machine, similarly Merriam-Webster Dictionary defines mechanical as relating to machinery or tools. Power flow through a machine provides a way to understand the performance of devices ranging from levers and gear trains to automobiles, notice that forces and motion combine to define power. More recently, Uicker et al. stated that a machine is a device for applying power or changing its direction, and McCarthy and Soh describe a machine as a system that generally consists of a power source and a mechanism for the controlled use of this power. The idea that a machine can be decomposed into simple movable elements led Archimedes to define the lever, pulley, by the time of the Renaissance this list increased to include the wheel and axle, wedge and inclined plane. The modern approach to characterizing machines focusses on the components that allow movement, wedge, Perhaps the first example of a device designed to manage power is the hand axe, also see biface and Olorgesailie. A hand axe is made by chipping stone, generally flint, to form a bifacial edge, a wedge is a simple machine that transforms lateral force and movement of the tool into a transverse splitting force and movement of the workpiece. The available power is limited by the effort of the using the tool, but because power is the product of force and movement. This amplification, or mechanical advantage is the ratio of the speed to output speed. For a wedge this is given by 1/tanα, where α is the tip angle, the faces of a wedge are modeled as straight lines to form a sliding or prismatic joint. Lever, The lever is another important and simple device for managing power and this is a body that pivots on a fulcrum. The fulcrum of a lever is modeled as a hinged or revolute joint, wheel, The wheel is clearly an important early machine, such as the chariot. A wheel uses the law of the lever to reduce the force needed to overcome friction when pulling a load. To see this notice that the associated with pulling a load on the ground is approximately the same as the friction in a simple bearing that supports the load on the axle of a wheel. However, the forms a lever that magnifies the pulling force so that it overcomes the frictional resistance in the bearing. Natural forces such as wind and water powered larger mechanical systems, waterwheels appeared around the world around 300 BC to use flowing water to generate rotary motion, which was applied to milling grain, and powering lumber, machining and textile operations
19.
Dye
–
A dye is a colored substance that has an affinity to the substrate to which it is being applied. The dye is applied in an aqueous solution, and may require a mordant to improve the fastness of the dye on the fiber. Both dyes and pigments are colored because they absorb some wavelengths of light more than others, in contrast to dyes, pigments are insoluble and have no affinity for the substrate. Some dyes can be precipitated with a salt to produce a lake pigment. The majority of natural dyes are from plant sources, roots, berries, bark, leaves, and wood, fungi, textile dyeing dates back to the Neolithic period. Throughout history, people have dyed their textiles using common, locally available materials, scarce dyestuffs that produced brilliant and permanent colors such as the natural invertebrate dyes Tyrian purple and crimson kermes were highly prized luxury items in the ancient and medieval world. Plant-based dyes such as woad, indigo, saffron, and madder were raised commercially and were important trade goods in the economies of Asia, across Asia and Africa, patterned fabrics were produced using resist dyeing techniques to control the absorption of color in piece-dyed cloth. Dyes from the New World such as cochineal and logwood were brought to Europe by the Spanish treasure fleets, dyed flax fibers have been found in the Republic of Georgia in a prehistoric cave dated to 36,000 BP. Archaeological evidence shows that, particularly in India and Phoenicia, dyeing has been carried out for over 5,000 years. The dyes were obtained from animal, vegetable or mineral origin, by far the greatest source of dyes has been from the plant kingdom, notably roots, berries, bark, leaves and wood, but only a few have ever been used on a commercial scale. The discovery of synthetic dyes late in the 19th century ended the large-scale market for natural dyes. These dyes are made from synthetic resources such as petroleum by-products, the first human-made organic aniline dye, mauveine, was discovered serendipitously by William Henry Perkin in 1856, the result of a failed attempt at the total synthesis of quinine. Other aniline dyes followed, such as fuchsine, safranine, many thousands of synthetic dyes have since been prepared. These may be natural or synthetic, other than pigmentation, they have a range of applications including organic dye lasers, optical media and camera sensors. This is the basic classification Dyes are classified according to their solubility, acid dyes are water-soluble anionic dyes that are applied to fibers such as silk, wool, nylon and modified acrylic fibers using neutral to acid dye baths. Attachment to the fiber is attributed, at least partly, to salt formation between anionic groups in the dyes and cationic groups in the fiber, acid dyes are not substantive to cellulosic fibers. Most synthetic food colors fall in this category, basic dyes are water-soluble cationic dyes that are mainly applied to acrylic fibers, but find some use for wool and silk. Usually acetic acid is added to the dye bath to help the uptake of the dye onto the fiber, basic dyes are also used in the coloration of paper
20.
Marble
–
Marble is a metamorphic rock composed of recrystallized carbonate minerals, most commonly calcite or dolomite. Geologists use the marble to refer to metamorphosed limestone, however. Marble is commonly used for sculpture and as a building material and this stem is also the basis for the English word marmoreal, meaning marble-like. In Hungarian it is called márvány, Marble is a rock resulting from metamorphism of sedimentary carbonate rocks, most commonly limestone or dolomite rock. Metamorphism causes variable recrystallization of the carbonate mineral grains. The resulting marble rock is composed of an interlocking mosaic of carbonate crystals. Primary sedimentary textures and structures of the carbonate rock have typically been modified or destroyed. Pure white marble is the result of metamorphism of a very pure limestone or dolomite protolith, green coloration is often due to serpentine resulting from originally magnesium-rich limestone or dolostone with silica impurities. These various impurities have been mobilized and recrystallized by the intense pressure, examples of historically notable marble varieties and locations, White marble has been prized for its use in sculptures since classical times. This preference has to do with its softness, which made it easier to carve, relative isotropy and homogeneity, construction marble is a stone which is composed of calcite, dolomite or serpentine which is capable of taking a polish. More generally in construction, specifically the dimension stone trade, the marble is used for any crystalline calcitic rock useful as building stone. For example, Tennessee marble is really a dense granular fossiliferous gray to pink to maroon Ordovician limestone that geologists call the Holston Formation. Ashgabat, the city of Turkmenistan, was recorded in the 2013 Guinness Book of Records as having the worlds highest concentration of white marble buildings. According to the United States Geological Survey, U. S. domestic marble production in 2006 was 46,400 tons valued at about $18.1 million, compared to 72,300 tons valued at $18.9 million in 2005. Crushed marble production in 2006 was 11.8 million tons valued at $116 million, of which 6.5 million tons was finely ground calcium carbonate and the rest was construction aggregate. For comparison,2005 crushed marble production was 7.76 million tons valued at $58.7 million, of which 4.8 million tons was finely ground calcium carbonate, U. S. dimension marble demand is about 1.3 million tons. The DSAN World Demand for Marble Index has shown a growth of 12% annually for the 2000–2006 period, the largest dimension marble application is tile. In 1998, marble production was dominated by 4 countries that accounted for almost half of production of marble
21.
Foundry
–
A foundry is a factory that produces metal castings. Metals are cast into shapes by melting them into a liquid, pouring the metal in a mold, the most common metals processed are aluminium and cast iron. However, other metals, such as bronze, brass, steel, magnesium, in this process, parts of desired shapes and sizes can be formed. In metalworking, casting involves pouring liquid metal into a mold, which contains a hollow cavity of the desired shape, the solidified part is also known as a casting, which is ejected or broken out of the mold to complete the process. Casting is most often used for making complex shapes that would be difficult or uneconomical to make by other methods, melting is performed in a furnace. Virgin material, external scrap, internal scrap, and alloying elements are used to charge the furnace, virgin material refers to commercially pure forms of the primary metal used to form a particular alloy. Alloying elements are either forms of an alloying element, like electrolytic nickel, or alloys of limited composition. External scrap is material from other forming processes such as punching, forging, internal scrap consists of gates, risers, defective castings, and other extraneous metal oddments produced within the facility. The process includes melting the charge, refining the melt, adjusting the melt chemistry, refining is done to remove deleterious gases and elements from the molten metal to avoid casting defects. Material is added during the process to bring the final chemistry within a specific range specified by industry and/or internal standards. Certain fluxes may be used to separate the metal from slag and/or dross, during the tap, final chemistry adjustments are made. Several specialised furnaces are used to heat the metal, furnaces are refractory-lined vessels that contain the material to be melted and provide the energy to melt it. Modern furnace types include electric arc furnaces, induction furnaces, cupolas, reverberatory, furnace choice is dependent on the alloy system quantities produced. For ferrous materials EAFs, cupolas, and induction furnaces are commonly used, reverberatory and crucible furnaces are common for producing aluminium, bronze, and brass castings. Furnace design is a process, and the design can be optimized based on multiple factors. Furnaces in foundries can be any size, ranging from ones used to melt precious metals to furnaces weighing several tons. They are designed according to the type of metals that are to be melted, furnaces must also be designed based on the fuel being used to produce the desired temperature. For low temperature melting point alloys, such as zinc or tin, electricity, propane, or natural gas are usually used to achieve these temperatures
22.
Metalworking
–
Metalworking is the process of working with metals to create individual parts, assemblies, or large-scale structures. The term covers a range of work from large ships and bridges to precise engine parts. It therefore includes a wide range of skills, processes. Metalworking is a science, art, hobby, industry and trade and its historical roots span cultures, civilizations, and millennia. Metalworking has evolved from the discovery of smelting various ores, producing malleable and ductile metal useful for tools, modern metalworking processes, though diverse and specialized, can be categorized as forming, cutting, or joining processes. Todays machine shop includes a number of machine tools capable of creating a precise, the oldest archaeological evidence of copper mining and working was the discovery of a copper pendant in northern Iraq from 8,700 BCE. The earliest substantiated and dated evidence of metalworking in the Americas was the processing of copper in Wisconsin, Copper was hammered until brittle then heated so it could be worked some more. This technology is dated to about 4000-5000 BCE, the oldest gold artifacts in the world come from the Bulgarian Varna Necropolis and date from 4450 BCE. Not all metal required fire to obtain it or work it, isaac Asimov speculated that gold was the first metal. His reasoning is that by its chemistry it is found in nature as nuggets of pure gold, in other words, gold, as rare as it is, is sometimes found in nature as the metal that it is. There are a few metals that sometimes occur natively. Almost all other metals are found in ores, a mineral-bearing rock, another feature of gold is that it is workable as it is found, meaning that no technology beyond a stone hammer and anvil to work the metal is needed. This is a result of properties of malleability and ductility. The earliest tools were stone, bone, wood, and sinew, at some unknown point the connection between heat and the liberation of metals from rock became clear, rocks rich in copper, tin, and lead came into demand. These ores were mined wherever they were recognized, remnants of such ancient mines have been found all over Southwestern Asia. Metalworking was being carried out by the South Asian inhabitants of Mehrgarh between 7000–3300 BCE, the end of the beginning of metalworking occurs sometime around 6000 BCE when copper smelting became common in Southwestern Asia. Ancient civilisations knew of seven metals. Here they are arranged in order of their potential, Iron +0.44 V
23.
Cherry
–
A cherry is the fruit of many plants of the genus Prunus, and is a fleshy drupe. The cherry fruits of commerce usually are obtained from a number of species such as cultivars of the sweet cherry. The name cherry also refers to the tree, and is sometimes applied to almonds and visually similar flowering trees in the genus Prunus, as in ornamental cherry, cherry blossom. Wild cherry may refer to any of the species growing outside of cultivation. The subgenus is native to the regions of the Northern Hemisphere. Other cherry fruits are members of subgenus Padus, most eating cherries are derived from either Prunus avium, the sweet cherry, or from Prunus cerasus, the sour cherry. The indigenous range of the sweet cherry extends through most of Europe, western Asia, and parts of northern Africa, and the fruit has been consumed throughout its range since prehistoric times. A cultivated cherry is recorded as having brought to Rome by Lucius Licinius Lucullus from northeastern Anatolia, also known as the Pontus region. Cherries were introduced into England at Teynham, near Sittingbourne in Kent, by order of Henry VIII, cherries arrived in North America early in the settlement of Brooklyn, New York when the region was under Dutch sovereignty. Trades people leased or purchased land to plant orchards and produce gardens, behind the house sold by Anthony Jansen from Salee to Barent Dirksen. Both species originate in Europe and western Asia, they do not cross-pollinate, some other species, although having edible fruit, are not grown extensively for consumption, except in northern regions where the two main species will not grow. Irrigation, spraying, labor, and their propensity to damage from rain, nonetheless, demand is high for the fruit. In commercial production, cherries are harvested by using a mechanized shaker, hand picking is also widely used to harvest the fruit to avoid damage to both fruit and trees. Common rootstocks include Mazzard, Mahaleb, Colt, and Gisela Series, sour cherries require no pollenizer, while few sweet varieties are self-fertile. Like most temperate-latitude trees, cherry seeds require exposure to cold to germinate, the pits are planted in the autumn and seedlings emerge in the spring. A cherry tree will take three to four years in the field to produce its first crop of fruit, and seven years to attain full maturity, because of the cold-weather requirement, none of the Prunus genus can grow in tropical climates. Cherries have a growing season and can grow in most temperate latitudes. Cherries blossom in April and the season for the cherry harvest is in the summer
24.
Turkish language
–
Outside of Turkey, significant smaller groups of speakers exist in Germany, Bulgaria, Macedonia, Northern Cyprus, Greece, the Caucasus, and other parts of Europe and Central Asia. Cyprus has requested that the European Union add Turkish as an official EU language, in 1928, as one of Atatürks Reforms in the early years of the Republic of Turkey, the Ottoman Turkish alphabet was replaced with a Latin alphabet. The distinctive characteristics of Turkish are vowel harmony and extensive agglutination, the basic word order of Turkish is subject–object–verb. Turkish has no classes or grammatical gender. Turkish has a strong T–V distinction and usage of honorifics, Turkish uses second-person pronouns that distinguish varying levels of politeness, social distance, age, courtesy or familiarity toward the addressee. The plural second-person pronoun and verb forms are used referring to a person out of respect. Turkic languages belong to the Altaic language group, the Turkic family comprises some 30 living languages spoken across Eastern Europe, Central Asia, and Siberia. Turkish is a member of the Oghuz group of languages, a subgroup of the Turkic language family, there is a high degree of mutual intelligibility between Turkish and the other Oghuz Turkic languages, including Azerbaijani, Turkmen, Qashqai, Gagauz, and Balkan Gagauz Turkish. The earliest known Old Turkic inscriptions are the three monumental Orkhon inscriptions found in modern Mongolia, erected in honour of the prince Kul Tigin and his brother Emperor Bilge Khagan, these date back to the second Turk Kaghanate. The Seljuqs of the Oghuz Turks, in particular, brought their language, following the adoption of Islam c. Turkish literature during the Ottoman period, particularly Divan poetry, was influenced by Persian, including the adoption of poetic meters. One of the tasks of the newly established association was to initiate a reform to replace loanwords of Arabic. By banning the usage of imported words in the press, the association succeeded in removing several hundred words from the language. While most of the words introduced to the language by the TDK were newly derived from Turkic roots, owing to this sudden change in the language, older and younger people in Turkey started to differ in their vocabularies. While the generations born before the 1940s tend to use the terms of Arabic or Persian origin. The past few decades have seen the work of the TDK to coin new Turkish words to express new concepts and technologies as they enter the language. Many of these new words, particularly information technology terms, have received widespread acceptance, however, the TDK is occasionally criticized for coining words which sound contrived and artificial. Some earlier changes—such as bölem to replace fırka, political party—also failed to meet with popular approval, some words restored from Old Turkic have taken on specialized meanings, for example betik is now used to mean script in computer science
25.
Ege University
–
Ege University is a public university in İzmir, Turkey. It was founded in 1955 with the faculties of Medicine and Agriculture and it is the first university to start courses in İzmir and the fourth oldest university in Turkey. Ege University commonly ranks close to the top research universities in Turkey. Ege University in Bornova, a district of Izmir, the third largest city in Turkey, by 1982, Ege University was one of the largest universities of Turkey with 17 faculties,9 junior college-type schools and 8 institutes. That same year, part of the university was separated into a new university, after the division, Ege University had 7 faculties,3 junior college-type schools and approximately 9000 students. It currently consists of 12 faculties,7 junior college-type schools,7 vocational training schools,8 institutes and 26 research centers, the campus covers wide range of facilities including culture, sport and social services. Car park, road and traffic signs and directions are available throughout, intercity, national and international communication from the campus is possible owing to phone lines and a computer network. Since the campus is at the crossroad of Ankara, Istanbul, apart from this, intercity transportation provided by municipal bus and underground services enable students to reach the campus from every part of the city. The General Directorate of Students Credits and Dormitories administers dormitories, which provide facilities for 6000 students on campus, with these facilities Ege University serves the students and the public in terms of education, science, health, social and cultural services. To extend these services, a West Campus was recently established in Çeşme, Ege University has approximately 40000 students now. Ege University offers opportunities for personal, cultural, social and professional development that complement the richly complex, at the beginning of each academic year and during the weekend, parties are organized for students enjoyment as a change of pace from academic routine. Excursions to historical and tourist sites are organized as a change of pace from the academic routine. An Art Gallery was established in March 1997, and it provides a convenient place for exhibitions, in this way, students, academic and administrative staff have an opportunity to pursue cultural activities on campus. Art Studios have been established to organize fine arts courses for students, there are 45 student clubs which are active in diverse fields. The General Directorate of Health, Culture and Sports organizes the activities of student clubs. One of the most favored social and cultural activities in Ege University is the traditional Sports and Arts Festival, concerts, sport games, cinema and theater presentations, sale and promotion stands, conferences, symposia, scientific meetings, fashion shows and competitions take place during the festival. Also, student groups from other Turkish universities and from foreign countries participate, there is students camp located in Özdere with a capacity of 200 beds. There are 10 periods in the summer vacation during which students, academic, activities and entertainment are organized to provide a comfortable and informal atmosphere
26.
Sanjak
–
Sanjaks were administrative divisions of the Ottoman Empire. Sanjak, and the variant spellings sandjak, sanjaq, and sinjaq, are English transliterations of the Turkish word sancak, meaning district, banner, sanjaks were also called by the Arabic word for banner or flag, لواء liwa. Ottoman provinces were divided into sanjaks governed by sanjakbeys and were subdivided into timars, kadiluks. The unofficial, geo-political region of Sandžak in Serbia derives its name from the former Ottoman Sanjak of Novi Pazar, Liwa or Liwa is an Arabic term interchangeable with the Turkish term Sanjak. After the fall of the Ottoman Empire, the term was used in the Arab countries formerly under Ottoman rule and it was gradually replaced by other terms like qadaa and mintaqah and is now defunct. These were Sultan-öyügü, Hudavendigar-eli, Koca-eli and Karasi-eli, the districts which made up an eyalet were known as sanjaks, each under the command of a sanjak-bey. The number of sanjaks in each eyalet varied considerably, in 1609, Ayn Ali noted that Rumelia Eyalet had 24 sanjaks, but that six of these in the Peloponnesos had been detached to form the separate Morea Eyalet. Anatolia had 14 sanjaks and the Damascus Eyalet had 11, there were, in addition, several eyalets where there was no formal division into sanjaks. These, in Ayn Ali’s list were Basra and part of the Baghdad, Al-Hasa, Egypt, Tripoli, Tunis and he adds to the list Yemen, with the note that ‘at the moment the Imams have usurped control’. These eyalets were, however, exceptional, the pattern was the eyalet subdivided into sanjaks. However, this had not always been the case, some sanjaks in fact preserved the names of the dynasties that had ruled there before the Ottoman conquest. In 1609, Ayn Ali made a note on their formal status, in listing the sanjaks in the Diyarbekir Eyalet, he notes that it had ten ‘Ottoman districts’ and, in addition, eight ‘districts of the Kurdish lords’. In these cases, when a lord died, the governorship did not go to an outsider, in other respects, however, they resembled normal Ottoman sanjaks, in that the revenues were registered and allocated to fief holders who went to war under their lord. In addition, however, Ayn Ali noted that there were five ‘sovereign sanjaks’, which their lords disposed of ‘as private property’, there were other areas, too, which enjoyed autonomy or semi-autonomy. In the second half of the 16th century, Kilis came under the governorship of the Janbulad family. In the 1840s, the boundaries of sanjaks were redrawn to establish units of comparable population. Each of these sanjaks was headed by a muhassil, most of the sanjaks throughout the Empire were under the rule of non-hereditary appointees, who had no permanent family of territorial connections with the area. The Sanjak was governed just as a Vilayet on a smaller scale, a sanjak was typically divided into kazas, also known as kadiluks, each headed by a kadı, or judge
27.
Ottoman Empire
–
After 1354, the Ottomans crossed into Europe, and with the conquest of the Balkans the Ottoman Beylik was transformed into a transcontinental empire. The Ottomans ended the Byzantine Empire with the 1453 conquest of Constantinople by Mehmed the Conqueror, at the beginning of the 17th century the empire contained 32 provinces and numerous vassal states. Some of these were later absorbed into the Ottoman Empire, while others were granted various types of autonomy during the course of centuries. With Constantinople as its capital and control of lands around the Mediterranean basin, while the empire was once thought to have entered a period of decline following the death of Suleiman the Magnificent, this view is no longer supported by the majority of academic historians. The empire continued to maintain a flexible and strong economy, society, however, during a long period of peace from 1740 to 1768, the Ottoman military system fell behind that of their European rivals, the Habsburg and Russian Empires. While the Empire was able to hold its own during the conflict, it was struggling with internal dissent. Starting before World War I, but growing increasingly common and violent during it, major atrocities were committed by the Ottoman government against the Armenians, Assyrians and Pontic Greeks. The word Ottoman is an anglicisation of the name of Osman I. Osmans name in turn was the Turkish form of the Arabic name ʿUthmān, in Ottoman Turkish, the empire was referred to as Devlet-i ʿAlīye-yi ʿOsmānīye, or alternatively ʿOsmānlı Devleti. In Modern Turkish, it is known as Osmanlı İmparatorluğu or Osmanlı Devleti, the Turkish word for Ottoman originally referred to the tribal followers of Osman in the fourteenth century, and subsequently came to be used to refer to the empires military-administrative elite. In contrast, the term Turk was used to refer to the Anatolian peasant and tribal population, the term Rūmī was also used to refer to Turkish-speakers by the other Muslim peoples of the empire and beyond. In Western Europe, the two names Ottoman Empire and Turkey were often used interchangeably, with Turkey being increasingly favored both in formal and informal situations and this dichotomy was officially ended in 1920–23, when the newly established Ankara-based Turkish government chose Turkey as the sole official name. Most scholarly historians avoid the terms Turkey, Turks, and Turkish when referring to the Ottomans, as the power of the Seljuk Sultanate of Rum declined in the 13th century, Anatolia was divided into a patchwork of independent Turkish principalities known as the Anatolian Beyliks. One of these beyliks, in the region of Bithynia on the frontier of the Byzantine Empire, was led by the Turkish tribal leader Osman, osmans early followers consisted both of Turkish tribal groups and Byzantine renegades, many but not all converts to Islam. Osman extended the control of his principality by conquering Byzantine towns along the Sakarya River and it is not well understood how the early Ottomans came to dominate their neighbours, due to the scarcity of the sources which survive from this period. One school of thought which was popular during the twentieth century argued that the Ottomans achieved success by rallying religious warriors to fight for them in the name of Islam, in the century after the death of Osman I, Ottoman rule began to extend over Anatolia and the Balkans. Osmans son, Orhan, captured the northwestern Anatolian city of Bursa in 1326 and this conquest meant the loss of Byzantine control over northwestern Anatolia. The important city of Thessaloniki was captured from the Venetians in 1387, the Ottoman victory at Kosovo in 1389 effectively marked the end of Serbian power in the region, paving the way for Ottoman expansion into Europe
28.
Karabel relief
–
The Hittite / Luwian Karabel relief is a rock relief in the pass of the same name, between Torbalı und Kemalpaşa, about 20 km from Izmir in Turkey. The monument originally consisted of four parts, two figures carved into the cliff and two inscriptions on boulders. During the construction of a road through the pass between 1977 and 1982, all the reliefs except for Karabel A were destroyed, Karabel A shows a warrior marching to the right with a bow in his right hand and a spear in his left. There are Luwian hieroglyphs inscribed above his left arm, the relief is 1.5 m wide and 2.5 m high Herodotus interpreted the figure as the Egyptian Pharaoh Sesostris. The relief was visited by the French traveller Charles Texier in 1839 - he published a description in 1862, after him, Karl Richard Lepsius visited it in 1840. Heinrich Kiepert disproved this in 1843 by comparing it with the reliefs of Yazılıkaya, according to the latest research, the relief depicts Tarkasnawa, the king of the Hittite vassal state of Mira under the Hittite empire. In 1998 John David Hawkins was able to read the inscription as follows, No traces of the name of the grandfather survive, the relief has wider historical significance as evidence that the kingdom of Mira was south of the Seha river land. From Hittite diplomatic letters, chiefly the Milawata letter, it is known that the Seha river land was bordered on one side by the kingdom of Mira and on the other side by Wilusa. The relief proves that Wilusa cannot have been south of the Gediz river and this aids in the identification of Wilusa with the city of Ilion, another name for Troy in Homers Iliad. Birgit Brandau, Hartmut Schickert, Hethiter, die unbekannte Weltmacht, Tarkasnawa, King of Mira, Tarkondemos, Boğazköy sealings and Karabel, Anatolian Studies 48,1998, pp. 1–31. Joachim Latacz, Troy and Homer, Towards a Solution of an Old Mystery Kevin Windle & Rosh Ireland
29.
Anatolia
–
Anatolia, in geography known as Asia Minor, Asian Turkey, Anatolian peninsula, or Anatolian plateau, is the westernmost protrusion of Asia, which makes up the majority of modern-day Turkey. The region is bounded by the Black Sea to the north, the Mediterranean Sea to the south, the Sea of Marmara forms a connection between the Black and Aegean Seas through the Bosphorus and Dardanelles straits and separates Anatolia from Thrace on the European mainland. Traditionally, Anatolia is considered to extend in the east to a line between the Gulf of Alexandretta and the Black Sea to the Armenian Highlands, thus, traditionally Anatolia is the territory that comprises approximately the western two-thirds of the Asian part of Turkey. The Turkification of Anatolia began under the Seljuk Empire in the late 11th century, however, various non-Turkic languages continue to be spoken by minorities in Anatolia today, including Kurdish, Assyrian, Armenian, Arabic, Laz, Georgian, and Greek. Traditionally, Anatolia is considered to extend in the east to a line running from the Gulf of Alexandretta to the Black Sea. This traditional geographical definition is used, for example, in the latest edition of Merriam-Websters Geographical Dictionary, under this definition, Anatolia is bounded to the east by the Armenian Highlands, and the Euphrates before that river bends to the southeast to enter Mesopotamia. To the southeast, it is bounded by the ranges that separate it from the Orontes valley in Syria, the first name the Greeks used for the Anatolian peninsula was Ἀσία, presumably after the name of the Assuwa league in western Anatolia. As the name of Asia came to be extended to areas east of the Mediterranean. The name Anatolia derives from the Greek ἀνατολή meaning “the East” or more literally “sunrise”, the precise reference of this term has varied over time, perhaps originally referring to the Aeolian, Ionian and Dorian colonies on the west coast of Asia Minor. In the Byzantine Empire, the Anatolic Theme was a theme covering the western, the modern Turkish form of Anatolia is Anadolu, which again derives from the Greek name Aνατολή. The Russian male name Anatoly and the French Anatole share the same linguistic origin, in English the name of Turkey for ancient Anatolia first appeared c. It is derived from the Medieval Latin Turchia, which was used by the Europeans to define the Seljuk controlled parts of Anatolia after the Battle of Manzikert. Human habitation in Anatolia dates back to the Paleolithic, neolithic Anatolia has been proposed as the homeland of the Indo-European language family, although linguists tend to favour a later origin in the steppes north of the Black Sea. However, it is clear that the Anatolian languages, the oldest branch of Indo-European, have spoken in Anatolia since at least the 19th century BC. The earliest historical records of Anatolia stem from the southeast of the region and are from the Mesopotamian-based Akkadian Empire during the reign of Sargon of Akkad in the 24th century BC, scholars generally believe the earliest indigenous populations of Anatolia were the Hattians and Hurrians. The region was famous for exporting raw materials, and areas of Hattian-, one of the numerous cuneiform records dated circa 20th century BC, found in Anatolia at the Assyrian colony of Kanesh, uses an advanced system of trading computations and credit lines. They were speakers of an Indo-European language, the Hittite language, originating from Nesa, they conquered Hattusa in the 18th century BC, imposing themselves over Hattian- and Hurrian-speaking populations. According to the most widely accepted Kurgan theory on the Proto-Indo-European homeland, however, the Hittites adopted the cuneiform script, invented in Mesopotamia
30.
Hittites
–
The Hittites were an Ancient Anatolian people who established an empire centered on Hattusa in north-central Anatolia around 1600 BC. Between the 15th and 13th centuries BC the Hittite Empire came into conflict with the Egyptian Empire, Middle Assyrian Empire, the Assyrians eventually emerged as the dominant power and annexed much of the Hittite empire, while the remainder was sacked by Phrygian newcomers to the region. They referred to their land as Hatti. The conventional name Hittites is due to their identification with the Biblical Hittites in 19th century archaeology. Before the discoveries, the source of information about Hittites had been the Old Testament. Francis William Newman expressed the view, common in the early 19th century. Uriah was a captain in King Davids army and counted among one of his mighty men in 1 Chronicles 11, french scholar Félix Marie Charles Texier discovered the first Hittite ruins in 1834, but did not identify them as Hittite. The first archaeological evidence for the Hittites appeared in tablets found at the Assyrian colony of Kültepe, some names in the tablets were neither Hattic nor Assyrian, but clearly Indo-European. The script on a monument at Boğazköy by a People of Hattusas discovered by William Wright in 1884 was found to match peculiar hieroglyphic scripts from Aleppo, in 1887, excavations at Tell El-Amarna in Egypt uncovered the diplomatic correspondence of Pharaoh Amenhotep III and his son Akhenaton. Shortly after this, Archibald Sayce proposed that Hatti or Khatti in Anatolia was identical with the kingdom of Kheta mentioned in these Egyptian texts, as well as with the biblical Hittites. Others, such as Max Müller, agreed that Khatti was probably Kheta, sayces identification came to be widely accepted over the course of the early 20th century, and the name Hittite has become attached to the civilization uncovered at Boğazköy. He also proved that the ruins at Boğazköy were the remains of the capital of an empire that, at one point, under the direction of the German Archaeological Institute, excavations at Hattusa have been under way since 1907, with interruptions during the world wars. Kültepe was successfully excavated by Professor Tahsin Özgüç from 1948 until his death in 2005, the Hittites used Mesopotamian Cuneiform script. The Museum of Anatolian Civilizations in Ankara, Turkey houses the richest collection of Hittite, the Hittite kingdom was centred on the lands surrounding Hattusa and Neša, known as the land Hatti. For example, the reward for the capture of a slave after he managed to flee beyond the Halys is higher than that for a slave caught before he could reach the river. To the west and south of the core territory lay the region known as Luwiya in the earliest Hittite texts and this terminology was replaced by the names Arzawa and Kizzuwatna with the rise of those kingdoms. Nevertheless, the Hittites continued to refer to the language originated in these areas as Luwian. Prior to the rise of Kizzuwatna, the heart of territory in Cilicia was first referred to by the Hittites as Adaniya
31.
Prehistory
–
Prehistory means literally before history, from the Latin word for before, præ, and Greek ιστορία. Neighbouring civilisations were the first to follow, most other civilisations reached the end of prehistory during the Iron Age. The period when a culture is written about by others, but has not developed its own writing is known as the protohistory of the culture. By definition, there are no records from human prehistory. Clear techniques for dating were not well-developed until the 19th century and this article is concerned with human prehistory as defined here above. There are separate articles for the history of the Earth. However, for the race as a whole, prehistory ends when recorded history begins with the accounts of the ancient world around the 4th millennium BC. For example, in Egypt it is accepted that prehistory ended around 3200 BC, whereas in New Guinea the end of the prehistoric era is set much more recently. The three-age system is the periodization of prehistory into three consecutive time periods, named for their respective predominant tool-making technologies, Stone Age Bronze Age Iron Age. The notion of prehistory began to surface during the Enlightenment in the work of antiquarians who used the word primitive to describe societies that existed before written records, the first use of the word prehistory in English, however, occurred in the Foreign Quarterly Review in 1836. The main source for prehistory is archaeology, but some scholars are beginning to more use of evidence from the natural and social sciences. This view has been articulated by advocates of deep history, human population geneticists and historical linguists are also providing valuable insight for these questions. Human prehistory differs from history not only in terms of its chronology, restricted to material processes, remains and artifacts rather than written records, prehistory is anonymous. Because of this, reference terms that use, such as Neanderthal or Iron Age are modern labels with definitions sometimes subject to debate. Palaeolithic means Old Stone Age, and begins with the first use of stone tools, the Paleolithic is the earliest period of the Stone Age. The early part of the Palaeolithic is called the Lower Palaeolithic, evidence of control of fire by early humans during the Lower Palaeolithic Era is uncertain and has at best limited scholarly support. The most widely accepted claim is that H. erectus or H. ergaster made fires between 790,000 and 690,000 BP in a site at Bnot Yaakov Bridge, Israel. The use of fire enabled early humans to cook food, provide warmth, Early Homo sapiens originated some 200,000 years ago, ushering in the Middle Palaeolithic
32.
Tumulus
–
A tumulus is a mound of earth and stones raised over a grave or graves. Tumuli are also known as barrows, burial mounds or kurgans, a cairn, which is a mound of stones built for various purposes, may also originally have been a tumulus. Tumuli are often categorised according to their external apparent shape, in this respect, a long barrow is a long tumulus, usually constructed on top of several burials, such as passage graves. A round barrow is a tumulus, also commonly constructed on top of burials. The internal structure and architecture of both long and round barrows has a range, the categorization only refers to the external apparent shape. The method of inhumation may involve a dolmen, a cist, a mortuary enclosure, examples of barrows include Duggleby Howe and Maeshowe. The funeral of Patroclus is described in book 23 of the Iliad, Patroclus is burned on a pyre, and his bones are collected into a golden urn in two layers of fat. The barrow is built on the location of the pyre, achilles then sponsors funeral games, consisting of a chariot race, boxing, wrestling, running, a duel between two champions to the first blood, discus throwing, archery and spear throwing. Beowulfs body is taken to Hronesness, where it is burned on a funeral pyre, during cremation, the Geats lament the death of their lord, a widows lament being mentioned in particular, singing dirges as they circumambulate the barrow. Afterwards, a mound is built on top of a hill, overlooking the sea, a band of twelve of the best warriors ride around the barrow, singing dirges in praise of their lord. Parallels have also drawn to the account of Attilas burial in Jordanes Getica. Jordanes tells that as Attilas body was lying in state, the best horsemen of the Huns circled it, as in circus games. An Old Irish Life of Columcille reports that every funeral procession halted at a mound called Eala, whereupon the corpse was laid, archaeologists often classify tumuli according to their location, form, and date of construction. Some British types are listed below, Bank barrow Bell barrow Bowl barrow D-shaped barrow - round barrow with a flat edge at one side often defined by stone slabs. Disc barrow Fancy barrow - generic term for any Bronze Age barrows more elaborate than a hemispherical shape. Long barrow Oval barrow - a Neolithic long barrow consisting of an elliptical, platform barrow - The least common of the recognised types of round barrow, consisting of a flat, wide circular mound that may be surrounded by a ditch. They occur widely across southern England with a concentration in East and West Sussex. Pond barrow - a barrow consisting of a circular depression, surrounded by a bank running around the rim of the depression
33.
Lydia
–
Lydia was an Iron Age kingdom of western Asia Minor located generally east of ancient Ionia in the modern western Turkish provinces of Uşak, Manisa and inland İzmir. Its population spoke an Anatolian language known as Lydian, at its greatest extent, the Kingdom of Lydia covered all of western Anatolia. Lydia was a satrapy of the Achaemenid Persian Empire, with Sardis as its capital, tabalus, appointed by Cyrus the Great, was the first satrap. Lydia was later the name of a Roman province, coins are said to have been invented in Lydia around the 7th century BC. The endonym Śfard survives in bilingual and trilingual stone-carved notices of the Achaemenid Empire and these in the Greek tradition are associated with Sardis, the capital city of King Gyges, constructed during the 7th century BC. The region of the Lydian kingdom was during the 15th-14th centuries part of the Arzawa kingdom, the Lydian language is not part of the Luwian subgroup. An Etruscan/Lydian association has long been a subject of conjecture, however, recent decipherment of Lydian and its classification as an Anatolian language mean that Etruscan and Lydian were not even part of the same language family. The boundaries of historical Lydia varied across the centuries and it was bounded first by Mysia, Caria, Phrygia and coastal Ionia. Later, the power of Alyattes II and Croesus expanded Lydia. Lydia never again shrank back into its original dimensions, the Lydian language was an Indo-European language in the Anatolian language family, related to Luwian and Hittite. It used many prefixes and grammatical particles, Lydian finally became extinct during the 1st century BC. Lydia developed after the decline of the Hittite Empire in the 12th century BC, in Hittite times, the name for the region had been Arzawa. According to Greek source, the name of the Lydian kingdom was Maionia, or Maeonia. Homer describes their capital not as Sardis but as Hyde, Hyde may have been the name of the district in which Sardis was located. Later, Herodotus adds that the Meiones were renamed Lydians after their king Lydus, son of Atys and this etiological eponym served to account for the Greek ethnic name Lydoi. During Biblical times, the Lydian warriors were famous archers, some Maeones still existed during historical times in the upland interior along the River Hermus, where a town named Maeonia existed, according to Pliny the Elder and Hierocles. In Greek myth, Lydia had also adopted the symbol, that also appears in the Mycenaean civilization. Omphale, daughter of the river Iardanos, was a ruler of Lydia, all three heroic ancestors indicate a Lydian dynasty claiming Heracles as their ancestor
34.
Luwians
–
Luwian is an ancient language or group of languages of the Anatolian branch of the Indo-European language family. The two varieties of Luwian are named for the scripts that they were written in, Cuneiform Luwian, as to whether these were one language or two, there is no consensus. Several other languages in Anatolia have been identified as being most similar to Luwian, some linguists name the branch the Luwian Group or just Luwian and, in that sense, Luwian means all of the Luwian languages. Other linguists, following Melchert, prefer to use Luwic for the branch, the name Luwian comes from the name of the land, Luwiya, where the speakers lived. It is mentioned in the Hittite laws, the region was later called Lydia. Luwian is closely related to Hittite, Luwian has been deduced as one of the likely candidates for the language spoken by the Trojans. Some fringe hypotheses rejected by historical linguistics are a relationship with Lemnian, a Thracian connection. According to James Mellaart, the earliest Indo-Europeans in northwest Anatolia were the horse-riders who came to this region from the north and they were ancestors of the Luwians who inhabited Troy II, and spread widely in the Anatolian peninsula. He cited the distribution of a new type of pottery, Red Slip Wares. According to Mellaart, the migrations to Anatolia came in several distinct waves over many centuries. The current trend is to see such migrations as mostly peaceful, Luwian was among the languages spoken during the 2nd and 1st millennia BC by groups in central and western Anatolia and northern Syria. In the Old Hittite version of the Hittite Code, some, if not all, widmer has argued that the Mycenaean term ru-wa-ni-jo, attested in Linear B, refers to the same area. In the post-Hittite era, the region of Arzawa came to be known as Lydia, the name Lydia has been derived from the name Luwiya, which further argues in favour of the location of Luwiya in the west. Beginning in the 14th century BC, Luwian-speakers came to constitute the majority in the Hittite capital Hattusa and it appears that by the time of the collapse of the Hittite Empire ca.1180 BC, the Hittite king and royal family were fully bilingual in Luwian. Cuneiform Luwian is a term refers to the corpus of Luwian texts attested in the tablet archives of Hattusa. In Laroches Catalog of Hittite Texts, the corpus of Hittite cuneiform texts with Luwian insertions runs from CTH 757–773, Cuneiform Luwian texts are written in several dialects, of which the most easily identifiable are Kizzuwatna Luwian, Istanuwa Luwian, and Empire Luwian. The last dialect represents the vernacular of Hattusan scribes of the 14th–13th centuries BC and is attested through Glossenkeil words in Hittite texts. Hieroglyphic Luwian is a term refers to the corpus of Luwian texts written in a native script
Kamëz, Albania, since 7 January 2011 [8]
Kavadarci, Macedonia, since 11 February 2013
Erzurum, Turkey since 1561
