1.
System of measurement
–
A system of measurement is a collection of units of measurement and rules relating them to each other. Systems of measurement have historically been important, regulated and defined for the purposes of science and commerce, systems of measurement in modern use include the metric system, the imperial system, and United States customary units. The French Revolution gave rise to the system, and this has spread around the world. In most systems, length, mass, and time are base quantities, later science developments showed that either electric charge or electric current could be added to extend the set of base quantities by which many other metrological units could be easily defined. Other quantities, such as power and speed, are derived from the set, for example. Such arrangements were satisfactory in their own contexts, the preference for a more universal and consistent system only gradually spread with the growth of science. Changing a measurement system has substantial financial and cultural costs which must be offset against the advantages to be obtained using a more rational system. However pressure built up, including scientists and engineers for conversion to a more rational. The unifying characteristic is that there was some definition based on some standard, eventually cubits and strides gave way to customary units to met the needs of merchants and scientists. In the metric system and other recent systems, a basic unit is used for each base quantity. Often secondary units are derived from the units by multiplying by powers of ten. Thus the basic unit of length is the metre, a distance of 1.234 m is 1,234 millimetres. Metrication is complete or nearly complete in almost all countries, US customary units are heavily used in the United States and to some degree in Liberia. Traditional Burmese units of measurement are used in Burma, U. S. units are used in limited contexts in Canada due to the large volume of trade, there is also considerable use of Imperial weights and measures, despite de jure Canadian conversion to metric. In the United States, metric units are used almost universally in science, widely in the military, and partially in industry, but customary units predominate in household use. At retail stores, the liter is a used unit for volume, especially on bottles of beverages. Some other standard non-SI units are still in use, such as nautical miles and knots in aviation. Metric systems of units have evolved since the adoption of the first well-defined system in France in 1795, during this evolution the use of these systems has spread throughout the world, first to non-English-speaking countries, and then to English speaking countries
2.
SI derived unit
–
The International System of Units specifies a set of seven base units from which all other SI units of measurement are derived. Each of these units is either dimensionless or can be expressed as a product of powers of one or more of the base units. For example, the SI derived unit of area is the metre. The degree Celsius has an unclear status, and is arguably an exception to this rule. The names of SI units are written in lowercase, the symbols for units named after persons, however, are always written with an uppercase initial letter. In addition to the two dimensionless derived units radian and steradian,20 other derived units have special names, some other units such as the hour, litre, tonne, bar and electronvolt are not SI units, but are widely used in conjunction with SI units. Until 1995, the SI classified the radian and the steradian as supplementary units, but this designation was abandoned, International System of Quantities International System of Units International Vocabulary of Metrology Metric prefix Metric system Non-SI units mentioned in the SI Planck units SI base unit I. Mills, Tomislav Cvitas, Klaus Homann, Nikola Kallay, IUPAC, Quantities, Units and Symbols in Physical Chemistry. CS1 maint, Multiple names, authors list
3.
Force
–
In physics, a force is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity, force can also be described intuitively as a push or a pull. A force has both magnitude and direction, making it a vector quantity and it is measured in the SI unit of newtons and represented by the symbol F. The original form of Newtons second law states that the net force acting upon an object is equal to the rate at which its momentum changes with time. In an extended body, each part usually applies forces on the adjacent parts, such internal mechanical stresses cause no accelation of that body as the forces balance one another. Pressure, the distribution of small forces applied over an area of a body, is a simple type of stress that if unbalanced can cause the body to accelerate. Stress usually causes deformation of materials, or flow in fluids. In part this was due to an understanding of the sometimes non-obvious force of friction. A fundamental error was the belief that a force is required to maintain motion, most of the previous misunderstandings about motion and force were eventually corrected by Galileo Galilei and Sir Isaac Newton. With his mathematical insight, Sir Isaac Newton formulated laws of motion that were not improved-on for nearly three hundred years, the Standard Model predicts that exchanged particles called gauge bosons are the fundamental means by which forces are emitted and absorbed. Only four main interactions are known, in order of decreasing strength, they are, strong, electromagnetic, weak, high-energy particle physics observations made during the 1970s and 1980s confirmed that the weak and electromagnetic forces are expressions of a more fundamental electroweak interaction. Since antiquity the concept of force has been recognized as integral to the functioning of each of the simple machines. The mechanical advantage given by a machine allowed for less force to be used in exchange for that force acting over a greater distance for the same amount of work. Analysis of the characteristics of forces ultimately culminated in the work of Archimedes who was famous for formulating a treatment of buoyant forces inherent in fluids. Aristotle provided a discussion of the concept of a force as an integral part of Aristotelian cosmology. In Aristotles view, the sphere contained four elements that come to rest at different natural places therein. Aristotle believed that objects on Earth, those composed mostly of the elements earth and water, to be in their natural place on the ground. He distinguished between the tendency of objects to find their natural place, which led to natural motion, and unnatural or forced motion
4.
Isaac Newton
–
His book Philosophiæ Naturalis Principia Mathematica, first published in 1687, laid the foundations of classical mechanics. Newton also made contributions to optics, and he shares credit with Gottfried Wilhelm Leibniz for developing the infinitesimal calculus. Newtons Principia formulated the laws of motion and universal gravitation that dominated scientists view of the universe for the next three centuries. Newtons work on light was collected in his influential book Opticks. He also formulated a law of cooling, made the first theoretical calculation of the speed of sound. Newton was a fellow of Trinity College and the second Lucasian Professor of Mathematics at the University of Cambridge, politically and personally tied to the Whig party, Newton served two brief terms as Member of Parliament for the University of Cambridge, in 1689–90 and 1701–02. He was knighted by Queen Anne in 1705 and he spent the last three decades of his life in London, serving as Warden and Master of the Royal Mint and his father, also named Isaac Newton, had died three months before. Born prematurely, he was a child, his mother Hannah Ayscough reportedly said that he could have fit inside a quart mug. When Newton was three, his mother remarried and went to live with her new husband, the Reverend Barnabas Smith, leaving her son in the care of his maternal grandmother, Newtons mother had three children from her second marriage. From the age of twelve until he was seventeen, Newton was educated at The Kings School, Grantham which taught Latin and Greek. He was removed from school, and by October 1659, he was to be found at Woolsthorpe-by-Colsterworth, Henry Stokes, master at the Kings School, persuaded his mother to send him back to school so that he might complete his education. Motivated partly by a desire for revenge against a bully, he became the top-ranked student. In June 1661, he was admitted to Trinity College, Cambridge and he started as a subsizar—paying his way by performing valets duties—until he was awarded a scholarship in 1664, which guaranteed him four more years until he would get his M. A. He set down in his notebook a series of Quaestiones about mechanical philosophy as he found it, in 1665, he discovered the generalised binomial theorem and began to develop a mathematical theory that later became calculus. Soon after Newton had obtained his B. A. degree in August 1665, in April 1667, he returned to Cambridge and in October was elected as a fellow of Trinity. Fellows were required to become ordained priests, although this was not enforced in the restoration years, however, by 1675 the issue could not be avoided and by then his unconventional views stood in the way. Nevertheless, Newton managed to avoid it by means of a special permission from Charles II. A and he was elected a Fellow of the Royal Society in 1672. Newtons work has been said to distinctly advance every branch of mathematics then studied and his work on the subject usually referred to as fluxions or calculus, seen in a manuscript of October 1666, is now published among Newtons mathematical papers
5.
Kilogram
–
The kilogram or kilogramme is the base unit of mass in the International System of Units and is defined as being equal to the mass of the International Prototype of the Kilogram. The avoirdupois pound, used in both the imperial and US customary systems, is defined as exactly 0.45359237 kg, making one kilogram approximately equal to 2.2046 avoirdupois pounds. Other traditional units of weight and mass around the world are also defined in terms of the kilogram, the gram, 1/1000 of a kilogram, was provisionally defined in 1795 as the mass of one cubic centimeter of water at the melting point of ice. The final kilogram, manufactured as a prototype in 1799 and from which the IPK was derived in 1875, had an equal to the mass of 1 dm3 of water at its maximum density. The kilogram is the only SI base unit with an SI prefix as part of its name and it is also the only SI unit that is still directly defined by an artifact rather than a fundamental physical property that can be reproduced in different laboratories. Three other base units and 17 derived units in the SI system are defined relative to the kilogram, only 8 other units do not require the kilogram in their definition, temperature, time and frequency, length, and angle. At its 2011 meeting, the CGPM agreed in principle that the kilogram should be redefined in terms of the Planck constant, the decision was originally deferred until 2014, in 2014 it was deferred again until the next meeting. There are currently several different proposals for the redefinition, these are described in the Proposed Future Definitions section below, the International Prototype Kilogram is rarely used or handled. In the decree of 1795, the term gramme thus replaced gravet, the French spelling was adopted in the United Kingdom when the word was used for the first time in English in 1797, with the spelling kilogram being adopted in the United States. In the United Kingdom both spellings are used, with kilogram having become by far the more common, UK law regulating the units to be used when trading by weight or measure does not prevent the use of either spelling. In the 19th century the French word kilo, a shortening of kilogramme, was imported into the English language where it has used to mean both kilogram and kilometer. In 1935 this was adopted by the IEC as the Giorgi system, now known as MKS system. In 1948 the CGPM commissioned the CIPM to make recommendations for a practical system of units of measurement. This led to the launch of SI in 1960 and the subsequent publication of the SI Brochure, the kilogram is a unit of mass, a property which corresponds to the common perception of how heavy an object is. Mass is a property, that is, it is related to the tendency of an object at rest to remain at rest, or if in motion to remain in motion at a constant velocity. Accordingly, for astronauts in microgravity, no effort is required to hold objects off the cabin floor, they are weightless. However, since objects in microgravity still retain their mass and inertia, the ratio of the force of gravity on the two objects, measured by the scale, is equal to the ratio of their masses. On April 7,1795, the gram was decreed in France to be the weight of a volume of pure water equal to the cube of the hundredth part of the metre
6.
Metre
–
The metre or meter, is the base unit of length in the International System of Units. The metre is defined as the length of the path travelled by light in a vacuum in 1/299792458 seconds, the metre was originally defined in 1793 as one ten-millionth of the distance from the equator to the North Pole. In 1799, it was redefined in terms of a metre bar. In 1960, the metre was redefined in terms of a number of wavelengths of a certain emission line of krypton-86. In 1983, the current definition was adopted, the imperial inch is defined as 0.0254 metres. One metre is about 3 3⁄8 inches longer than a yard, Metre is the standard spelling of the metric unit for length in nearly all English-speaking nations except the United States and the Philippines, which use meter. Measuring devices are spelled -meter in all variants of English, the suffix -meter has the same Greek origin as the unit of length. This range of uses is found in Latin, French, English. Thus calls for measurement and moderation. In 1668 the English cleric and philosopher John Wilkins proposed in an essay a decimal-based unit of length, as a result of the French Revolution, the French Academy of Sciences charged a commission with determining a single scale for all measures. In 1668, Wilkins proposed using Christopher Wrens suggestion of defining the metre using a pendulum with a length which produced a half-period of one second, christiaan Huygens had observed that length to be 38 Rijnland inches or 39.26 English inches. This is the equivalent of what is now known to be 997 mm, no official action was taken regarding this suggestion. In the 18th century, there were two approaches to the definition of the unit of length. One favoured Wilkins approach, to define the metre in terms of the length of a pendulum which produced a half-period of one second. The other approach was to define the metre as one ten-millionth of the length of a quadrant along the Earths meridian, that is, the distance from the Equator to the North Pole. This means that the quadrant would have defined as exactly 10000000 metres at that time. To establish a universally accepted foundation for the definition of the metre, more measurements of this meridian were needed. This portion of the meridian, assumed to be the length as the Paris meridian, was to serve as the basis for the length of the half meridian connecting the North Pole with the Equator
7.
Second
–
The second is the base unit of time in the International System of Units. It is qualitatively defined as the division of the hour by sixty. SI definition of second is the duration of 9192631770 periods of the corresponding to the transition between the two hyperfine levels of the ground state of the caesium 133 atom. Seconds may be measured using a mechanical, electrical or an atomic clock, SI prefixes are combined with the word second to denote subdivisions of the second, e. g. the millisecond, the microsecond, and the nanosecond. Though SI prefixes may also be used to form multiples of the such as kilosecond. The second is also the unit of time in other systems of measurement, the centimetre–gram–second, metre–kilogram–second, metre–tonne–second. Absolute zero implies no movement, and therefore zero external radiation effects, the second thus defined is consistent with the ephemeris second, which was based on astronomical measurements. The realization of the second is described briefly in a special publication from the National Institute of Standards and Technology. 1 international second is equal to, 1⁄60 minute 1⁄3,600 hour 1⁄86,400 day 1⁄31,557,600 Julian year 1⁄, more generally, = 1⁄, the Hellenistic astronomers Hipparchus and Ptolemy subdivided the day into sixty parts. They also used an hour, simple fractions of an hour. No sexagesimal unit of the day was used as an independent unit of time. The modern second is subdivided using decimals - although the third remains in some languages. The earliest clocks to display seconds appeared during the last half of the 16th century, the second became accurately measurable with the development of mechanical clocks keeping mean time, as opposed to the apparent time displayed by sundials. The earliest spring-driven timepiece with a hand which marked seconds is an unsigned clock depicting Orpheus in the Fremersdorf collection. During the 3rd quarter of the 16th century, Taqi al-Din built a clock with marks every 1/5 minute, in 1579, Jost Bürgi built a clock for William of Hesse that marked seconds. In 1581, Tycho Brahe redesigned clocks that displayed minutes at his observatory so they also displayed seconds, however, they were not yet accurate enough for seconds. In 1587, Tycho complained that his four clocks disagreed by plus or minus four seconds, in 1670, London clockmaker William Clement added this seconds pendulum to the original pendulum clock of Christiaan Huygens. From 1670 to 1680, Clement made many improvements to his clock and this clock used an anchor escapement mechanism with a seconds pendulum to display seconds in a small subdial
8.
International System of Units
–
The International System of Units is the modern form of the metric system, and is the most widely used system of measurement. It comprises a coherent system of units of measurement built on seven base units, the system also establishes a set of twenty prefixes to the unit names and unit symbols that may be used when specifying multiples and fractions of the units. The system was published in 1960 as the result of an initiative began in 1948. It is based on the system of units rather than any variant of the centimetre-gram-second system. The motivation for the development of the SI was the diversity of units that had sprung up within the CGS systems, the International System of Units has been adopted by most developed countries, however, the adoption has not been universal in all English-speaking countries. The metric system was first implemented during the French Revolution with just the metre and kilogram as standards of length, in the 1830s Carl Friedrich Gauss laid the foundations for a coherent system based on length, mass, and time. In the 1860s a group working under the auspices of the British Association for the Advancement of Science formulated the requirement for a coherent system of units with base units and derived units. Meanwhile, in 1875, the Treaty of the Metre passed responsibility for verification of the kilogram, in 1921, the Treaty was extended to include all physical quantities including electrical units originally defined in 1893. The units associated with these quantities were the metre, kilogram, second, ampere, kelvin, in 1971, a seventh base quantity, amount of substance represented by the mole, was added to the definition of SI. On 11 July 1792, the proposed the names metre, are, litre and grave for the units of length, area, capacity. The committee also proposed that multiples and submultiples of these units were to be denoted by decimal-based prefixes such as centi for a hundredth, on 10 December 1799, the law by which the metric system was to be definitively adopted in France was passed. Prior to this, the strength of the magnetic field had only been described in relative terms. The technique used by Gauss was to equate the torque induced on a magnet of known mass by the earth’s magnetic field with the torque induced on an equivalent system under gravity. The resultant calculations enabled him to assign dimensions based on mass, length, a French-inspired initiative for international cooperation in metrology led to the signing in 1875 of the Metre Convention. Initially the convention only covered standards for the metre and the kilogram, one of each was selected at random to become the International prototype metre and International prototype kilogram that replaced the mètre des Archives and kilogramme des Archives respectively. Each member state was entitled to one of each of the prototypes to serve as the national prototype for that country. Initially its prime purpose was a periodic recalibration of national prototype metres. The official language of the Metre Convention is French and the version of all official documents published by or on behalf of the CGPM is the French-language version
9.
Classical mechanics
–
In physics, classical mechanics is one of the two major sub-fields of mechanics, along with quantum mechanics. Classical mechanics is concerned with the set of physical laws describing the motion of bodies under the influence of a system of forces. The study of the motion of bodies is an ancient one, making classical mechanics one of the oldest and largest subjects in science, engineering and technology. Classical mechanics describes the motion of objects, from projectiles to parts of machinery, as well as astronomical objects, such as spacecraft, planets, stars. Within classical mechanics are fields of study that describe the behavior of solids, liquids and gases, Classical mechanics also provides extremely accurate results as long as the domain of study is restricted to large objects and the speeds involved do not approach the speed of light. When both quantum and classical mechanics cannot apply, such as at the level with high speeds. Since these aspects of physics were developed long before the emergence of quantum physics and relativity, however, a number of modern sources do include relativistic mechanics, which in their view represents classical mechanics in its most developed and accurate form. Later, more abstract and general methods were developed, leading to reformulations of classical mechanics known as Lagrangian mechanics and these advances were largely made in the 18th and 19th centuries, and they extend substantially beyond Newtons work, particularly through their use of analytical mechanics. The following introduces the concepts of classical mechanics. For simplicity, it often models real-world objects as point particles, the motion of a point particle is characterized by a small number of parameters, its position, mass, and the forces applied to it. Each of these parameters is discussed in turn, in reality, the kind of objects that classical mechanics can describe always have a non-zero size. Objects with non-zero size have more complicated behavior than hypothetical point particles, because of the degrees of freedom. However, the results for point particles can be used to such objects by treating them as composite objects. The center of mass of a composite object behaves like a point particle, Classical mechanics uses common-sense notions of how matter and forces exist and interact. It assumes that matter and energy have definite, knowable attributes such as where an object is in space, non-relativistic mechanics also assumes that forces act instantaneously. The position of a point particle is defined with respect to a fixed reference point in space called the origin O, in space. A simple coordinate system might describe the position of a point P by means of a designated as r. In general, the point particle need not be stationary relative to O, such that r is a function of t, the time