Infinite photos and videos for every Wiki article · Find something interesting to watch in seconds
History
Page
A passive proximity card for door access.
A passive proximity card for door access.
A proximity card controlled turnstile
A proximity card controlled turnstile
A passive proximity card with the plastic casing opened to show components: antenna coil and integrated circuit (black object bottom center)
A passive proximity card with the plastic casing opened to show components: antenna coil and integrated circuit (black object bottom center)
Anatomy of proximity card: coil and IC
Anatomy of proximity card: coil and IC
Page
Finnish national identity card
Finnish national identity card
One of the first smart card prototypes, created by its inventor Roland Moreno around 1975. The chip has not yet been miniaturized. On this prototype,
One of the first smart card prototypes, created by its inventor Roland Moreno around 1975. The chip has not yet been miniaturized. On this prototype, one can see how each pin of the microchip (center) is connected to the exterior world by a copper connector.
First smart card manufactured by Giesecke & Devrient in 1979, already with the finally standardized dimension (ID-1) and a contact area with eight pad
First smart card manufactured by Giesecke & Devrient in 1979, already with the finally standardized dimension (ID-1) and a contact area with eight pads (initially on the upper left corner)
4 by 4 mm silicon chip in a SIM card, which was peeled open. Note the thin gold bonding wires and the regular, rectangular digital-memory areas.
4 by 4 mm silicon chip in a SIM card, which was peeled open. Note the thin gold bonding wires and the regular, rectangular digital-memory areas.